Equipment operator jobs in Clifton, New JerseyCreate job alerts

Job Description Reporting to the Maintenance Supervisor or other Manager, the HVAC Mechanic “A” will lead the daily operation of the HVAC/R shop at the College. This position will be responsible for the ongoing temperature control and comfort of the heating and cooling systems at the College to support academic, lab, administrative, and specialized HVAC/R systems. POSITION SUMMARY Responsibilities include, but are not limited to: • Installs, operates, maintains, and repairs complex HVAC/R systems including water and oil pumps, water analysis and chemical treatment systems, air compressors, pneumatic, electrical and mechanical controls, refrigeration, heating, cooling and ventilating equipment, filters, condensers, cooling towers, evaporators, and heat exchangers., • Responds to HVAC system complaints, performs troubleshooting of systems and provides feedback to Supervisors and Managers on progress., • Plans and performs preventative maintenance tasks for College HVAC/R systems to optimize system performance and energy efficiency., • Installs electric power, piping, controls and duct work to replace, maintain or to install new equipment., • Maintains logs, checklists, and prepares written reports to Supervisor, as appropriate., • Enters information into the College’s Computerized Maintenance Management System (CMMS) to document all work, parts used, system conditions, hours worked, and leverages system data., • Ensures compliance with all safety standards, buildings codes, and environmental regulations., • Leverages Building Automation and Building Management Systems (BAS/BMS) to prioritize, document, and improve system performance and facility comfort., • Monitor and oversee College and contractor staff, as needed., • Attends training sessions and meetings to stay current on all trade, College, and regulatory requirements, • Maintains the cleanliness and orderliness of department spaces., • Prepares list of materials required to maintain inventory and complete projects., • Must respond to emergencies and maintenance tasks, as required, which may include working off-hours or holidays., • Reports to the College during closures and assists with snow and ice clearing operations, as needed., • Performs any other duties or task as may be assigned. SPECIAL SKILLS AND QUALIFICATIONS Education: High School diploma or equivalent required. Vocational School education or an appropriate apprenticeship preferred. Completion of a Journeyman level training program in HVAC/R or associate’s degree in HVAC/R Experience: • Minimum of Six years’ experience maintaining and repairing sophisticated commercial and industrial air conditioning systems including electric/pneumatic controls, fume hoods, high capacity centrifugal refrigeration equipment and roof top units., • Must be EPA Certified Universal Technician in accordance with Section 608 to handle CFCs, HCFCs, and HFCs, • Must have NJ Blue Seal Refrigeration, • Additional state or local licenses and certifications is a plus, • Experience working in an inclusive, collaborative, and respectful team setting., • Embodies a “culture of safety” in all tasks and recommends safety improvements. Other: Must have a valid Driver’s License. Must have or obtain a Certified Pool Operator certificate within 6 months of hire. Knowledge, Skills and Abilities: • Demonstrates knowledge of facility operations, maintenance, and industry standards., • Knowledge of power and hand tools, chemical handing procedures, and associated safety protocols., • Knowledge of computerized building automation systems and building managements systems., • Proficiency with Microsoft Office Suite and Google business suite experience preferred., • Provides excellent customer service to students, faculty, and staff., • Excellent organizational, prioritization, time management, and communication skills., • Experience with computerized maintenance management systems (CMMS) preferred., • Interprets and understands blueprints, schematics, wiring diagrams, and layouts., • Reviews projects and capital improvement scopes of work to identify opportunities for improvement., • Brazing, soldering, and industry standard pipe joining techniques. Physical requirements: • Prolonged periods walking, standing, bending, stretching, pushing, pulling, climbing ladders, or kneeling on uneven surfaces, • Physically able to operate powered equipment and tools, • Must be able to lift up to 50 pounds at a time, • Able to work in unconditioned, noisy, dimly light, confined, and odorous spaces, including the ability to work in variable and sometimes extreme weather conditions such as rain, snow, storms, heat, cold, and other weather indigenous to the area, • Must be able to wear personal protective equipment (PPE) for prolonged periods of time, • Must be able to climb a ladder and work at heights for extended periods of time Salary and Benefits • Annual Salary is $65,000-$80,000, • NJ Educator's Health Plan with Free Dental and Vision. NJ State Pension Plan., • 13 vacation days, 15 sick days, 4 personal days, 2 floating holidays, 3 Partial Sick Days, all designated holidays and 5 non-designated holidays a year. Bergen Community College provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description We are looking for a Diesel Mechanic - Machine Operator to join our team! You will be responsible for repairing various vehicles and equipment Responsibilities: • Repair Yellow Diesel Equipment, • Perform routine maintenance, • Use diagnostic tools to test vehicle components, • Perform quality inspections, • Operate yellow equip to move into position for repair Qualifications: • Previous experience as a mechanic, • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Ability to thrive in a fast-paced environment\nCompany Description Solid Waste Transfer Station visit www.Lemcortransfer.com for more information Solid Waste Transfer Station visit www.Lemcortransfer.com for more information

Job DescriptionDescription: Looking for a different Personal Training role? At PureGym US we take training personally. Our goal is to offer members the most affordable sessions in the industry while offering highly competitive compensation to trainers. About PureGym Group The PureGym Group is a global leading gym operator, boasting over 700 locations and more than 2 million members worldwide. We’ve been in the US for over 3 years now and are now starting a big national expansion, starting across New York and New Jersey! Our commitment to providing high-quality, affordable gyms for everyone, everywhere, remains unwavering. Our mission to inspire healthier nations has made us the UK's favorite gym, and now, an international success story. With our unique "Everybody Welcome" approach, we create a friendly, warm, and inclusive environment for all our employees and members. Compensation & Benefits: • Make up to $50 an hour!, • Pay Transparency: $19/per half-hour session (half-hour & hour sessions available); $15.92/hour (non-session work); With significant bonuses in place to take hourly session rates up to $50!, • Comprehensive Benefits package for all Trainers, • Medical, Dental, and Vision plans, if work 30 or more hours on average weekly, • 401(k) Retirement savings plan, • Career Advancement opportunities, • Complimentary gym membership The Role As a Personal Trainer (PT) you will provide personalized attention, professional instruction, and exercise programs to each member. Our dedication to a Personal Trainer’s success is part of the larger commitment to maximize our member’s health, fitness, and wellness goals. Join our team and discover a dynamic work environment built around helping others maximize their potential, where limitless opportunity is cultivated by the highest industry standards across training, education, marketing, media and sales. Responsibilities: • Build and maintain a client base through conducting PT Intro and paid sessions, • Prepare and deliver comprehensive fitness programs based on clients’ goals, • Motivate and inspire clients to get results through goal setting and frequent follow-up, • Continue to pursue additional training knowledge through offered continuing education programs through NASM Club Connect., • Contribute to the member experience by engaging members with enthusiasm and respect, • Demonstrate safe and proper exercise technique to members contributing to and enhancing the overall member experience, • Maintain knowledge of all company-offered services, programs, and products as part of our member commitment, • Active participation in any required meetings Requirements: The Person • Current nationally recognized Personal Training Certification or a bachelor’s degree in the field, • Cardiopulmonary Resuscitation (CPR) and Automated External Defibrillator (AED) certification required, • Desire to transform lives through educating members on health and wellness topics, • Understand principles of physical fitness and proper exercise technique, • Possess excellent customer service skills, • Possess or be willing to learn sales skills, • Ability to self-promote and network, • Ability to communicate clearly and concisely, both verbally and in writing, • Adjust and operate fitness equipment, • Full time availability - preferred As a Personal Trainer, You Will Receive: • Supportive approach to scheduling whether you are a part- or full-time Trainer, • Access to our dedicated and unrivalled PT Business Support team for free courses, insight, and coaching to help you build and run your business, • Free CEC courses to keep your accreditation valid with industry experts, • Free advertising on the PureGym in club, • Free Gym Membership for yourself, • With access to a growing member base, PureGym US is bringing the low cost no membership model to make health and fitness accessible to everyone, • Bonus opportunities for eligible trainers such as but not limited to: Productivity Bonus #INDLV

Job Description Travel the U.S. | Capture Dance Competitions | Professional Equipment Provided Season: February - June Why DanceBUG? For nearly 25 years, DanceBUG has been North America's leader in dance media and event technology. • Travel across the United States capturing dance competitions using professional camera and livestream production equipment, • We provide everything you need to succeed - including equipment, paid training, flights, hotels, rental cars, and travel expenses, • Work with next-generation AI-assisted camera technology as we continue to shape the future of live event productionNo Dance Experience Required If you've filmed sports, live events, weddings, concerts, theatre, or other fast-paced productions, we'll teach you everything you need to know. Compensation and Benefits • Starting at $25/hour, • Paid travel days, • Flights, hotels, rental cars and travel expenses covered, • Professional camera and livestream production equipment provided, • Guaranteed minimum daily pay, • Overtime after 40 hours/week, • Private hotel room, • No video editing or post-production, • Paid trainingWhat You'll Do, • Travel to dance competitions throughout the United States, • Operate professional camera and livestream production equipment, • Capture high-quality performances, • Set up and monitor camera and livestream systems, • Upload and manage event mediaPaid Training Every new Camera Operator receives: • Virtual training during January, • A minimum of two live training events with an experienced Senior Camera Operator, • Hands-on instruction before working independently You'll never be sent to your first event without real-world training and support. Requirements • Legally authorized to work in the United States (DanceBUG does not sponsor work visas), • Live within approximately one hour of a major airport, • Valid U.S. driver's license, • Available to travel Thursday through Monday during the season, • Comfortable driving 5-6 hours when required, • Comfortable with long production days and travel, • Able to lift approximately 50 lbs, • Able to pass a criminal background checkExperience in Any of the Following is Considered an Asset, • Sports camera operation, • Live event production, • Wedding and event videography, • Broadcasting, • Concerts and theatre, • Film production, • Livestreaming (OBS), • Multi-camera switching, • Jib operationReady to Hit the Road? Join DanceBUG this season and travel the country, capturing unforgettable performances and working with innovative production technology. Apply today - we'd love to hear from you. Powered by JazzHR Compensation details: 25-25 Hourly Wage PI353b30fc39cd-25405-41466769

Pioneer is Now Hiring CDL-A Company Flatbed Drivers!$5,000 Sign-On Bonus - Average Up to $1,800 Weekly GrossMostly Home Weekly - Full Healthcare Benefits\n \n (Must have a valid CDL-A license and 1 year of experience.) \n \n Top Company Flatbed Driver Benefits: \n\n • Top drivers earn up to $90,000 per year\n, • Average $1,500 - $1,800 weekly gross pay\n, • Average $1,200 - $1,500 weekly net pay\n, • Home weekly or bi-weekly\n, • We strive to get our drivers home on weekends\n, • $5,000 sign-on bonus\n, • $3,000 referral bonus\n, • Full benefits with BCBS - eligible 1st day of the month after 31 days of employment\n\n Requirements:\n\n • Valid Class A CDL\n, • 1 year of verifiable CDL-A experience preferred\n\n Hit the Open Road with Pioneer! Apply Now!\n Lease Purchase Program Available:\n\n • Lease Operators average $4,000 - $5,000 per week*\n, • Home weekends\n, • $5,000 sign-on bonus\n, • $3,000 referral bonus\n, • All expenses paid orientation\n, • 77% of line haul for Tractor and Trailer\n, • 100% of fuel surcharge paid to owner\n, • We handle your fuel taxes!\n\n \n *Pay varies by route, location, experience level and performance. \n Additional Benefits:\n\n • Newer equipment - 2021-2025 Freightliners and International's\n, • Holiday pay eligible after 180 days of employment\n, • Single dispatcher for each driver\n, • Free rider & pet programs\n, • Training programs available!\n, • Detention pay\n, • Direct Deposit, paid out every Friday\n, • 401(k) with company match\n\n Interested in a Career with Pioneer? Apply Today!\n About Pioneer:\n On January 6, 2025, Pioneer Transportation officially launched as the newest over-the-road flatbed division under the trusted name of P&S Transportation. In just a short time, we’ve grown to more than 120 professional drivers strong, and we’re just getting started. \n At Pioneer, we’re committed to building a driver-first culture with the stability, freight network, and resources of P&S behind us. Whether you’re looking for the consistency of a company driver position, the opportunity to grow through a lease program, or the independence of running as a true owner-operator, we have a place for you on our team. \n Find Out for Yourself What's Possible with Pioneer! Apply Now!

Job Description ! We are Actively Hiring During Covid-19 ! Truck Driver (Roll-Off) - Sanitation Hauling (1) Job Summary • We are seeking a Roll Off Truck Driver to join the L&M Disposal Team! You will be responsible for safely operating a Roll-Off Truck in hauling Open-top Containers and Compactors to and from select client locations. Total capacity of the vehicle plus cargo is around 30,000 pounds or more Gross Vehicle Weight (GVW)., • Benefits: Our employees receive Paid Vacation, Holidays, and Personal Days. Health Insurance & 401k. (2) Responsibilities: • Safely Operate Heavy & lite loads on Residential and Highway Roads as well as Dumps and Transfer Stations., • Load and Unload Waste at Dump/Transfer Stations (i.e. unhooking/hooking up container, tarping loads.), • Carefully Inspecting Truck Before Driver gets on Road., • Properly Track and Document Container/Compactor Pick-Ups/Deliveries/Swaps along with Dump tickets and Box Numbers., • Report any issues or incidents to dispatch as soon as possible., • Inspect Truck Before and After Workday., • Must Come to Work on Time! We do NOT Haul Hazardous Materials (3) Qualifications: • Previous experience with a Roll-Off is Required. (at least 2-3 years) REQUIRED, • Commercial driver's license (Class-B) + (Airbrake endorsement) REQUIRED, • Ability to Handle Physical Workload Without Complaining., • Ability to Follow Directions Clearly., • Clean Drivers License with Zero Points., • Familiarity with Local Roads & Routes (Northern New Jersey)., • Strong work ethic., • Commercial Driver's License with Airbrake Endorsement., • Ability to Handle Physical Workload Without Complaining., • Strong Work Ethic and those that are Passionate and Driven about their career.\nCompany Description lmdisposal.com L&M Disposal, LLC Proudly Serving New Jersey, Since 1929 L&M Disposal LLCTM is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, protected veteran status, or any other basis protected by applicable law, and will not be discriminated against on the basis of disability. L&M Disposal is a family owned & operated company operating as a solid waste collector/hauler in Northern, New Jersey. L&M and its key employees have demonstrated a vast experience in the solid waste collection industry as well as a long history of reliable service. In 2002 owner/operator Lawrence Pucillo started L&M Disposal. With over 45 years of experience and being the 3rd generation within his family in the solid waste industry, he recognizes what it takes to deliver the best service for his customers. L&M Disposal values their customer which is exhibited through their prompt service and reliability. It is apparent the company’s fundamental values are set high from the simplicity of ordering a dumpster to schedule a pickup. L&M Disposal also has an on-site maintenance facility where complete preventative preservation and repairs are performed to all equipment, vehicles, and containers. lmdisposal.com\r\nL&M Disposal, LLC \r\nProudly Serving New Jersey, Since 1929\r\n\r\nL&M Disposal LLCTM is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, protected veteran status, or any other basis protected by applicable law, and will not be discriminated against on the basis of disability.\r\n\r\nL&M Disposal is a family owned & operated company operating as a solid waste collector/hauler in Northern, New Jersey. L&M and its key employees have demonstrated a vast experience in the solid waste collection industry as well as a long history of reliable service.\r\n\r\nIn 2002 owner/operator Lawrence Pucillo started L&M Disposal. With over 45 years of experience and being the 3rd generation within his family in the solid waste industry, he recognizes what it takes to deliver the best service for his customers. L&M Disposal values their customer which is exhibited through their prompt service and reliability. It is apparent the company’s fundamental values are set high from the simplicity of ordering a dumpster to schedule a pickup. L&M Disposal also has an on-site maintenance facility where complete preventative preservation and repairs are performed to all equipment, vehicles, and containers.

Job Description ! We are Actively Hiring During Covid-19 ! Truck Driver (Roll-Off) - Sanitation Hauling (1) Job Summary • We are seeking a Roll Off Truck Driver to join the L&M Disposal Team! You will be responsible for safely operating a Roll-Off Truck in hauling Open-top Containers and Compactors to and from select client locations. Total capacity of the vehicle plus cargo is around 30,000 pounds or more Gross Vehicle Weight (GVW)., • Benefits: Our employees receive Paid Vacation, Holidays, and Personal Days. Health Insurance & 401k. (2) Responsibilities: • Safely Operate Heavy & lite loads on Residential and Highway Roads as well as Dumps and Transfer Stations., • Load and Unload Waste at Dump/Transfer Stations (i.e. unhooking/hooking up container, tarping loads.), • Carefully Inspecting Truck Before Driver gets on Road., • Properly Track and Document Container/Compactor Pick-Ups/Deliveries/Swaps along with Dump tickets and Box Numbers., • Report any issues or incidents to dispatch as soon as possible., • Inspect Truck Before and After Workday., • Must Come to Work on Time! We do NOT Haul Hazardous Materials (3) Qualifications: • Previous experience with a Roll-Off is Required. (at least 2-3 years) REQUIRED, • Commercial driver's license (Class-B) + (Airbrake endorsement) REQUIRED, • Ability to Handle Physical Workload Without Complaining., • Ability to Follow Directions Clearly., • Clean Drivers License with Zero Points., • Familiarity with Local Roads & Routes (Northern New Jersey)., • Strong work ethic., • Commercial Driver's License with Airbrake Endorsement., • Ability to Handle Physical Workload Without Complaining., • Strong Work Ethic and those that are Passionate and Driven about their career.\nCompany Description lmdisposal.com L&M Disposal, LLC Proudly Serving New Jersey, Since 1929 L&M Disposal LLCTM is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, protected veteran status, or any other basis protected by applicable law, and will not be discriminated against on the basis of disability. L&M Disposal is a family owned & operated company operating as a solid waste collector/hauler in Northern, New Jersey. L&M and its key employees have demonstrated a vast experience in the solid waste collection industry as well as a long history of reliable service. In 2002 owner/operator Lawrence Pucillo started L&M Disposal. With over 45 years of experience and being the 3rd generation within his family in the solid waste industry, he recognizes what it takes to deliver the best service for his customers. L&M Disposal values their customer which is exhibited through their prompt service and reliability. It is apparent the company’s fundamental values are set high from the simplicity of ordering a dumpster to schedule a pickup. L&M Disposal also has an on-site maintenance facility where complete preventative preservation and repairs are performed to all equipment, vehicles, and containers. lmdisposal.com\r\nL&M Disposal, LLC \r\nProudly Serving New Jersey, Since 1929\r\n\r\nL&M Disposal LLCTM is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, protected veteran status, or any other basis protected by applicable law, and will not be discriminated against on the basis of disability.\r\n\r\nL&M Disposal is a family owned & operated company operating as a solid waste collector/hauler in Northern, New Jersey. L&M and its key employees have demonstrated a vast experience in the solid waste collection industry as well as a long history of reliable service.\r\n\r\nIn 2002 owner/operator Lawrence Pucillo started L&M Disposal. With over 45 years of experience and being the 3rd generation within his family in the solid waste industry, he recognizes what it takes to deliver the best service for his customers. L&M Disposal values their customer which is exhibited through their prompt service and reliability. It is apparent the company’s fundamental values are set high from the simplicity of ordering a dumpster to schedule a pickup. L&M Disposal also has an on-site maintenance facility where complete preventative preservation and repairs are performed to all equipment, vehicles, and containers.

Job Description NOW HIRING: CLASS A OWNER OPERATORS Join Transportation Made Simple (TMS) Transportation Made Simple (TMS) is expanding our Owner Operator fleet and looking for experienced, dependable Class A CDL Owner Operators for port and intermodal container work throughout the Northeast and beyond. We are looking for professional drivers who want consistent opportunities, strong operational support, and the flexibility to run local, regional, or long-haul freight. Opportunities Available • Local Routes, • Regional Routes, • Long-Haul Routes, • Port & Intermodal Container Work, • Opportunities throughout New Jersey, New York, the Northeast, and beyond Why Work With TMS? As an Owner Operator with Transportation Made Simple, you'll have the support of an experienced transportation team behind you. We offer: • In-house chassis availability, • On-site mechanic support, • Experienced dispatch and operational support, • Assistance with:, • Vehicle registration, • Insurance documentation, • IFTA, • HUT, • Access to established port and transportation operations, • Local, regional, and long-haul opportunities, • A team that understands the demands of port and intermodal trucking Requirements • Valid Class A CDL, • Minimum 1 year of verifiable commercial driving experience, • Valid TWIC card, • Must be eligible to enter and operate within port terminals, • Manual transmission experience, • Acceptable driving record, • Dependable, punctual, and professional, • Knowledge of port and intermodal operations preferred Owner Operator Responsibilities • Safely transport intermodal containers and other assigned freight, • Pick up and deliver containers from port terminals and customer locations, • Communicate effectively with dispatch regarding pickups, deliveries, delays, and equipment, • Use GPS and routing tools to plan efficient routes, • Follow all DOT, FMCSA, port, terminal, and company safety requirements, • Complete required paperwork and shipment documentation, • Maintain professional communication and service with customers, • Represent Transportation Made Simple professionally at all times Ready to Get Started? If you're an experienced Owner Operator looking for a company that understands port trucking and provides the operational support you need to keep moving, Transportation Made Simple wants to hear from you. Transportation Made Simple (TMS) Transportation made simple. Opportunities built for drivers.

Pioneer is Now Hiring CDL-A Flatbed Company Drivers!Earn Up to $90,000 per Year - $5,000 Sign-On Bonus Mostly Home Weekly - Full Healthcare Benefits\n Top Company Driver Benefits:\n\n • Top drivers earn up to $90,000 per year\n, • Average $1,500-$1,800 weekly gross pay\n, • Average $1,200-$1,500 weekly net pay\n, • Home weekly or bi-weekly\n \n, • We strive to get our drivers home on weekends\n \n, • $5,000 sign-on bonus\n, • $3,000 referral bonus\n, • Detention pay\n, • Direct Deposit, paid out every Friday\n, • Full benefits with BCBS - eligible 1st day of the month after 31 days of employment\n, • 401(k) with company match\n\n Lease Purchase Program Available: \n\n • Lease Operators average $4,000-$5,000 per week*\n, • Home weekends\n, • $5,000 sign-on bonus\n, • $3,000 referral bonus\n, • All expenses paid orientation\n, • 77% of line haul for Tractor and Trailer\n, • 100% of fuel surcharge paid to owner\n, • We handle your fuel taxes!\n\n \n *Pay varies by route, location, experience level and performance. \n Interested in a Career with Pioneer? Apply Today!\n Start Driving with Pioneer Today! Apply Now!\n Additional Benefits:\n\n • Newer equipment - 2021-2025 Freightliners and International's\n, • Holiday pay eligible after 180 days of employment\n, • Single dispatcher for each driver\n, • Free rider & pet programs\n, • Training programs available!\n\n Requirements:\n\n • Valid Class A CDL\n, • 1 year of verifiable CDL-A experience preferred\n\n About Pioneer:\n On January 6, 2025, Pioneer Transportation officially launched as the newest over-the-road flatbed division under the trusted name of P&S Transportation. In just a short time, we’ve grown to more than 120 professional drivers strong, and we’re just getting started. \n \n At Pioneer, we’re committed to building a driver-first culture with the stability, freight network, and resources of P&S behind us. Whether you’re looking for the consistency of a company driver position, the opportunity to grow through a lease program, or the independence of running as a true owner-operator, we have a place for you on our team. \n Pioneer Isn't Just a Job, It's a Family and a Career. Find Out for Yourself! Apply Now!

Job Description Job Title: Slitting Operator Location: West Caldwell, NJ Type: Contract Compensation: $25.00 - $27.00 per hour Work Model: Onsite Hours: 6:15 a.m. - 2:30 p.m. (with potential for OT) Responsibilities • Operate slitting and rewinding equipment to process raw materials, medical tapes, and coated laminates and films. • Complete in-process checks and batch record documentation accurately according to manufacturing orders. • Set up equipment correctly, including wind direction and tension settings, in accordance with SOPs. • Use slitting tools and machine components safely and effectively, including scissors, crush, and razor knives. • Label, package, and prepare finished materials for transfer or shipment as required. • Clean equipment and maintain the work area in compliance with safety, environmental, and housekeeping standards. • Complete all aspects of the slitting operation, including in-process control activities and batch record documentation accordance with manufacturing orders. • Follow manufacturing procedures and support safe, efficient production operations as needed. Requirements • High school diploma or equivalent. • 4-5 years of production or manufacturing experience. • Ability to read, write, and communicate clearly in a manufacturing environment. • Basic math skills and ability to complete production documentation accurately. • Comfort using basic tools, equipment, and manufacturing machinery. • Able to wear safety glasses, hearing protection, full face/half mask respirator, latex gloves, tyvek suit, and other safety equipment as needed. System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #562-Joule Staffing - Edison

Job Description ! We are Actively Hiring During Covid-19 ! Truck Driver (Roll-Off) - Sanitation Hauling (1) Job Summary Roll-Off Drivers safely operates a heavy-duty truck and is responsible for preparing, loading, and transporting large mobile open top and compactor containers to disposal sites, transfer or recycle facilities and customer locations. Roll-Off Drivers will navigate driveways, alleyways, lots, high traffic roadways and may operate in tight overhead environments while on industrial routes. Highly skilled backing maneuvers are essential, to successfully perform this job. Roll-Off Drivers will receive notice of (needed work) ranging from a few days in advance down to an hour before the workday. Drivers must be able to commute and show up ready to work as soon as possible. This is a casual/on-call part-time truck driving position that is perfect for licensed CDL Class B drivers seeking supplemental income and looking to work anywhere from 0 to 25 hours a week based on business needs. This position is based at 105 Route 46 West, Lodi NJ. Candidate must be able to work Monday or Friday and Saturdays during the summer. More Details; Job Location: 105 Route 46 West, Lodi NJ, 07644 Employment Type: Part-Time Benefits: Our employees receive Paid Vacation, Holidays, and Personal Days. *Health Insurance & 401k available for Full Time Employment* (2) Responsibilities: • Arrive to work quickly and on time after receiving On Call request., • Ability to come into work with short notice & carry out work duties., • Safely Operate Heavy & lite loads on Residential and Highway Roads as well as Dumps and Transfer Stations., • Load and Unload Waste at Dump/Transfer Stations (i.e. unhooking/hooking up container, tarping loads.), • Carefully Inspecting Truck Before Driver gets on Road., • Properly Track and Document Container/Compactor Pick-Ups/Deliveries/Swaps along with Dump tickets and Box Numbers., • Report any issues or incidents to dispatch as soon as possible., • Inspect Truck Before and After Workday., • Must Come to Work on Time! We do NOT Haul Hazardous Materials (3) Qualifications: • Previous experience with a Roll-Off is Required. (at least 2-3 years) REQUIRED, • Commercial driver's license (Class-B) + (Airbrake endorsement) REQUIRED, • Ability to Handle Physical Workload Without Complaining., • Ability to Follow Directions Clearly., • Clean Drivers License with Zero Points., • Familiarity with Local Roads & Routes (Northern New Jersey)., • Strong work ethic., • Commercial Driver's License with Airbrake Endorsement., • Ability to Handle Physical Workload Without Complaining., • Strong Work Ethic and those that are Passionate and Driven about their career. (4) Compensation Range $25.00 – $30.00 / USD • Hourly • Overtime is Available *, • Compensation is heavy based upon previous experience/skill * \nCompany Description lmdisposal.com L&M Disposal, LLC Proudly Serving New Jersey, Since 1929 L&M Disposal LLCTM is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, protected veteran status, or any other basis protected by applicable law, and will not be discriminated against on the basis of disability. L&M Disposal is a family owned & operated company operating as a solid waste collector/hauler in Northern, New Jersey. L&M and its key employees have demonstrated a vast experience in the solid waste collection industry as well as a long history of reliable service. In 2002 owner/operator Lawrence Pucillo started L&M Disposal. With over 45 years of experience and being the 3rd generation within his family in the solid waste industry, he recognizes what it takes to deliver the best service for his customers. L&M Disposal values their customer which is exhibited through their prompt service and reliability. It is apparent the company’s fundamental values are set high from the simplicity of ordering a dumpster to schedule a pickup. L&M Disposal also has an on-site maintenance facility where complete preventative preservation and repairs are performed to all equipment, vehicles, and containers. lmdisposal.com\r\nL&M Disposal, LLC \r\nProudly Serving New Jersey, Since 1929\r\n\r\nL&M Disposal LLCTM is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, protected veteran status, or any other basis protected by applicable law, and will not be discriminated against on the basis of disability.\r\n\r\nL&M Disposal is a family owned & operated company operating as a solid waste collector/hauler in Northern, New Jersey. L&M and its key employees have demonstrated a vast experience in the solid waste collection industry as well as a long history of reliable service.\r\n\r\nIn 2002 owner/operator Lawrence Pucillo started L&M Disposal. With over 45 years of experience and being the 3rd generation within his family in the solid waste industry, he recognizes what it takes to deliver the best service for his customers. L&M Disposal values their customer which is exhibited through their prompt service and reliability. It is apparent the company’s fundamental values are set high from the simplicity of ordering a dumpster to schedule a pickup. L&M Disposal also has an on-site maintenance facility where complete preventative preservation and repairs are performed to all equipment, vehicles, and containers.

Job Description REMOTE POSITION, BUT CANDIDATE MUST RESIDE IN NEW JERSEY AND BE AVAILABLE FOR OCCASIONAL SITE VISITS IN NYC/NORTHERN NJ. Compensation is negotiated as a lump-sum fee for each assigned project or scope of work, based on the project scope, schedule, and responsibilities. This is not an hourly employee position. Project workload will vary, and no minimum number of projects or amount of work is guaranteed. Our goal is to develop long-term relationships with strong freelance professionals who can become regular members of AEP's extended project team. Qualified contractors may be added to our team for future assignments and contacted as suitable projects become available. Work is primarily performed from home. Occasional site visits in Northern NJ and NYC are required AEP Engineering, LLC is a growing MEP engineering consulting firm seeking an experienced, highly reliable U.S.-based freelance Plumbing / Fire Protection / Sprinkler Designer within practical driving distance of the New York City / Northern New Jersey metropolitan area to support commercial and residential building projects. This is a 1099 independent-contractor position only. We are looking for an established freelancer or independent professional with meaningful availability for ongoing project work. This is not intended as a moonlighting position for someone whose full-time employment will take priority over AEP projects. The right person will become a trusted recurring member of our extended project team and will be expected to take ownership of assigned work, meet commitments, and communicate proactively. Responsibilities Typical responsibilities may include: • Develop plumbing and fire-protection designs from architectural backgrounds, project criteria, and direction from AEP, • Develop domestic cold- and hot-water distribution systems, • Develop sanitary waste and vent systems, • Develop storm-drainage systems where applicable, • Develop natural-gas distribution systems where applicable, • Perform plumbing fixture-unit, water-demand, sanitary, storm, and gas-load calculations, • Size piping and related plumbing-system components, • Design domestic water-heating systems and select equipment, • Develop plumbing riser diagrams and schematics, • Coordinate plumbing requirements for architectural, mechanical, electrical, kitchen, specialty, and other equipment, • Develop fire-protection and sprinkler-system layouts where included in the project scope, • Determine applicable sprinkler design criteria, hazard classifications, design densities, coverage requirements, and system requirements, • Develop sprinkler head layouts, piping arrangements, risers, standpipes, and related fire-protection systems as applicable, • Develop fire-protection performance criteria and coordinated design drawings for delegated-design sprinkler systems where appropriate, • Perform or assist with sprinkler hydraulic calculations where required, • Review available water-supply information and identify when additional flow-test or utility information is required, • Coordinate fire-protection systems with architectural, structural, mechanical, electrical, fire alarm, and plumbing disciplines, • Prepare plumbing and fire-protection plans, schedules, risers, details, notes, and specifications, • Assist with equipment selections and technical product review, • Identify coordination conflicts and missing information before they affect the project, • Incorporate review comments and revisions, • Perform self-QA/QC before submitting work for AEP review, • Assist with responses to contractor, architect, and client technical questions as required What We Are Looking For We are looking for a designer, not simply a CAD operator. The ideal candidate can receive architectural backgrounds and project requirements, understand the design intent, determine what needs to be done, and independently develop coordinated plumbing and fire-protection designs without requiring every pipe, fixture connection, valve, sprinkler head, riser, and note to be individually marked up. Technical ability is important, but reliability, communication, and ownership are equally important to us. We are specifically looking for someone who: • Treats agreed project deadlines as firm commitments, • Does not place AEP projects on the back burner because another client becomes more urgent, • Communicates immediately if an issue could affect scope, schedule, or quality, • Proactively identifies missing information, coordination issues, design concerns, and potential problems, • Asks questions early rather than allowing uncertainty to become a last-minute issue, • Takes ownership of assigned work from start through completion, • Is receptive to feedback and willing to learn AEP's preferred design standards, procedures, and workflows, • Reviews their own work carefully before submitting it, • Communicates clearly and professionally, • Is reasonably available during normal U.S. business hours Qualifications • Professional experience designing plumbing systems for buildings, • Professional experience with fire-protection and sprinkler-system design, • Strong AutoCAD skills, • Experience producing permit and construction-document drawing sets, • Knowledge of domestic water, sanitary, vent, storm, natural gas, and domestic water-heating systems, • Experience performing plumbing sizing and demand calculations, • Working knowledge of sprinkler-system design, hazard classifications, densities, sprinkler coverage requirements, piping arrangements, and hydraulic principles, • Familiarity with standpipe systems and fire-service requirements where applicable, • Ability to distinguish between engineer-of-record design requirements and delegated sprinkler-contractor design responsibilities, • Ability to read and coordinate architectural and other engineering drawings, • Strong written and verbal English communication, • Ability to work independently and remotely, • U.S.-based, • Experience with commercial, multifamily residential, healthcare, retail, office, renovation, and/or new-construction projects is preferred, • Working knowledge of the IBC, IPC, applicable fuel-gas codes, NFPA 13, NFPA 13R, NFPA 14, and the NYC Building and Plumbing Codes is required. Candidates must understand the major code sections, know how they affect their design, when they apply, and know how to efficiently locate and interpret applicable code requirements when asked., • Familiarity with NYC fire-protection requirements and FDNY-related requirements is strongly preferred, • PE licensure is not required for this position Site Survey / Local Travel Requirement This is a remote freelance position, but candidates must be located within reasonable driving distance of AEP's primary New York/New Jersey project area and must be willing and able to travel to project sites as needed. Responsibilities may include: • Conducting existing-condition and due-diligence site surveys, • Documenting existing plumbing fixtures, piping, water services, sanitary and storm systems, gas services, sprinkler systems, standpipes, fire services, and related building conditions, • Taking field measurements, photographs, pipe-size information, equipment information, and utility information, • Identifying visible conflicts, deficiencies, and conditions that may affect the proposed design, • Organizing field notes and survey information for use in design, • Communicating significant field findings promptly to AEP Candidates must have: • Reliable transportation, • A valid driver's license, • Ability and willingness to travel to project sites in New Jersey, New York City, and surrounding areas, • Confidence working independently in occupied and unoccupied buildings, • Ability to conduct thorough, organized field surveys without requiring constant direction Software and Equipment Requirements As an independent contractor, you must provide and maintain your own: • Computer and related hardware, • Reliable high-speed internet connection, • AutoCAD software suitable for performing the required work, • Microsoft 365 software, including Word, Excel, Outlook/email, and other standard office applications, • Professional email and reliable phone/online communication capability, • Any other general software and equipment normally required to perform your freelance design work AEP does not provide computer hardware, Microsoft 365 licenses, AutoCAD licenses, or general office equipment for this independent-contractor position. Contractor Relationship This is a remote 1099 freelance independent-contractor relationship. Project workload will vary, and no minimum number of hours or projects is guaranteed. Our objective is to develop long-term relationships with strong freelance professionals who can become regular contributors to AEP projects as our workload continues to grow. Work will be assigned on a project or task basis, with scope, schedule, and compensation established for each assignment. To Apply Please submit your resume and briefly answer the following: • How many years of plumbing design experience do you have?, • How many years of fire-protection/sprinkler design experience do you have?, • Do you currently work as a freelancer or independent contractor?, • What types of building projects do you have the most experience designing?, • Are you able to independently develop plumbing designs from architectural backgrounds and project criteria?, • Are you able to independently develop sprinkler layouts and fire-protection design criteria?, • Do you perform sprinkler hydraulic calculations yourself?, • How familiar are you with NFPA 13, NFPA 13R, NFPA 14, and NYC plumbing/fire-protection requirements?, • What version of AutoCAD do you currently use?, • Approximately how much availability do you typically have each week?, • What hours are you generally available during the U.S. workday?, • Are you located in the United States?, • What is your typical hourly rate or preferred project-based compensation?\nCompany Description AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area. AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area.

Job DescriptionDescription: Jimmy's Gourmet Bakery is looking for dependable and motivated Production Associates to join our production team. In this role, you will help package finished products, ensure quality standards are met, and support daily production operations in a fast-paced food manufacturing environment. If you're a team player who enjoys hands-on work and takes pride in producing quality products, we'd love to hear from you. Requirements: • Pack products according to company specifications and customer requirements, • Inspect products for quality and remove any items that do not meet standards, • Ensure the correct labels are applied to cartons and verify label accuracy, • Keep packaging equipment supplied with boxes and bag stock, • Monitor and operate packaging equipment, including box erectors, label applicators, case sealers, and palletizers, • Assist with basic equipment troubleshooting and clearing minor jams, • Maintain a clean and organized work area, • Follow all Good Manufacturing Practices (GMPs), food safety, and company policies, • Assist with the sanitation of production areas and equipment, • Wrap pallets manually when required, • Support production goals while maintaining quality and safety standards Qualifications • Previous manufacturing, production, assembly, warehouse, or machine operator experience preferred, • Food manufacturing experience is a plus, • Ability to work in a fast-paced environment, • Strong attention to detail and quality, • Reliable attendance and punctuality, • Ability to follow instructions and work as part of a team Physical Requirements • Ability to stand for extended periods on concrete floors, • Frequent bending, stooping, twisting, and reaching, • Ability to lift up to 40 pounds occasionally, • Ability to push and pull heavy objects as needed Our Commitment to You At Jimmy's Gourmet Bakery, we believe our team's success starts with feeling valued and supported. That's why we offer: • Competitive pay and performance bonuses, • 401(k) with company match, • Health, dental, and vision insurance, • Company-paid life insurance and EAP support, • Generous PTO and career growth opportunities Join a team that values your contributions and well-being.

Job DescriptionDescription: Job Summary: We are seeking a full-time Cable Assembler Lead operator for Second Shift (3:30PM – 12:00AM). Responsible to manufacture finished products using sub-assemblies, component parts, and fasteners according to customer specifications and company policies. The Cable Assembly Lead serves as the primary on-site leader for the shift and is fully responsible for supervising personnel, meeting production targets Onboarding will include a minimum of 30 days working on First Shift alongside the plant Assembly Manager to ensure consistency, effective knowledge transfer, and operational alignment. Essential Job Functions: · Position is full-time Monday to Saturday; 3:30 pm – 12:00 am · Operate and maintain equipment safely while conducting high production output, quality, and efficiency levels · Crimping/swaging end fittings, tubing onto cut-lengths of wire rope using rotary swaging machines, and pneumatic and hydraulic presses · Ability to follow basic work instructions · Provide hands-on technical support, including machine troubleshooting, setup, calibration, and die changeovers. · Read and interpret blueprints, specifications, and work instructions; use precision measuring equipment (calipers, micrometers) to verify setups and perform in-process quality checks. · Ability to use measuring equipment such as micrometers, calipers, and tape measures to ensure dimensional conformance · Strong attention to detail · Ensure compliance with all safety policies, OSHA requirements, quality standards, and established work procedures. Requirements: Qualifications: · High School Diploma or GED required · This position requires standing, walking, kneeling, bending, climbing, pulling, pushing, lifting, and reaching above and below the shoulders. · Hands-on experience operating and troubleshooting production equipment. · Strong understanding of manufacturing processes, work instructions, and blueprint interpretation. · Proficiency with precision measuring tools, including calipers and micrometers. · Strong communication, problem-solving, and leadership skills. · Ability to lift up to 55 lbs. Management reserves the right to assign or reassign duties and responsibilities to this job at any time. EOE, including disability/vets

Job Description Fabuwood is seeking a dependable, detail-oriented, and hands-on UV Paint Line Machine Operator to oversee the operation, maintenance, and performance of our UV coating production line. This role is responsible for ensuring the efficient and continuous operation of UV finishing equipment while maintaining high standards of quality, safety, and productivity. The ideal candidate will have experience in industrial paint or finishing operations and possess strong mechanical troubleshooting skills. Schedule: Mon-Thurs 7:30am-4:30pm & Fri 7:30am-12:00pm Key Responsibilities Production Operations • Operate, monitor, and maintain UV paint line equipment to ensure continuous and efficient production., • Set up and adjust machine settings to meet production specifications and quality requirements., • Monitor line performance, production output, and product quality throughout the shift., • Ensure materials, coatings, and supplies are properly loaded and available to support uninterrupted production., • Verify finished products meet company quality standards and specifications. Equipment Maintenance & Troubleshooting • Perform routine inspections, preventive maintenance, and cleaning of UV paint line equipment., • Identify, troubleshoot, and resolve minor mechanical, electrical, or operational issues to minimize downtime., • Communicate equipment malfunctions and major repair needs to Maintenance and Production leadership., • Maintain accurate maintenance and production records as required. Quality & Continuous Improvement • Conduct regular quality checks and inspections throughout the production process., • Identify defects, inconsistencies, or process deviations and take corrective action when appropriate., • Assist in process improvement initiatives aimed at increasing efficiency, reducing waste, and improving product quality., • Support continuous improvement efforts and recommend operational enhancements. Safety & Housekeeping • Follow all company safety policies, procedures, and PPE requirements., • Maintain a clean, organized, and safe work area around the UV paint line and surrounding equipment., • Report safety concerns, hazards, and incidents promptly., • Participate in safety meetings, training programs, and operational audits as required. Qualifications Required • Previous experience working in a paint production, coating, finishing, manufacturing, or industrial production environment., • Experience operating industrial machinery and production equipment., • Basic mechanical aptitude with the ability to troubleshoot and perform minor equipment repairs., • Strong attention to detail and commitment to quality., • Ability to work independently while maintaining productivity standards., • Ability to read and follow work instructions, production schedules, and safety procedures. Preferred • Experience operating UV paint line equipment or automated coating/finishing systems., • Knowledge of UV coating applications, curing processes, and finishing operations., • Experience working in cabinet manufacturing, furniture manufacturing, woodworking, or related industries., • Forklift certification or willingness to become certified. Physical Requirements • Ability to stand, walk, bend, and move throughout the shift., • Ability to lift up to 50 pounds when necessary., • Ability to work in a manufacturing environment with exposure to machinery, noise, and industrial materials., • Ability to wear required personal protective equipment (PPE). Benefits • Weekly Pay, • Company Matching 401(k), • Medical, Dental, and Vision Insurance, • Life Insurance, • Paid Time Off (PTO), • Paid Holidays About Fabuwood Fabuwood is one of the leading kitchen cabinet manufacturers in the United States. We are committed to delivering exceptional quality, innovation, and customer service while fostering a culture of teamwork, accountability, and continuous improvement. Join a company where your contributions directly impact our success and growth.

Job Description Job Title: Production Operator Location: Lyndhurst, NJ Type: Contract To Hire Compensation: $20.00-$20.50 (based on shift) Work Model: Onsite Hours: 2nd SHIFT 2pm-10:30pm will train on 1st shift Mon-Friday; from 6am-2:30pm 3rd SHIFT Monday-Friday; from 10pm-6:30am; will train on 1st shift Mon-Friday; from 6am-2:30pm Responsibilities • Operate manufacturing and/or packaging line(s) to ensure maximum production quantity and quality, supporting company policies, goals, and objectives for an 8 or 12-hour shift. • Tend manual or semiautomatic systems processing chemical substances into products such as sealants, adhesives, mortars, primers, and intermediates. • Load solid materials into heating/cooling vessels or blending tanks, and set controls or operate valves to feed materials through equipment. • Observe chemical reactions, monitor gauges, signals, and recorders, and receive notifications to adjust operating parameters as needed. • Draw samples for quality control analysis and perform chemical tests/QC checks to ensure product conformance with specifications. • Utilize forklift to package, palletize, shrink-wrap, and stage products into designated areas or onto trucks for transportation. • Perform related duties and assist with special projects as assigned, ensuring conformance with safety rules to maintain plant safety. Requirements • High School graduate; trade school certification in electronics or related field a plus • Ability to read, write, and comprehend documents in English • Able to lift up to 74 lbs. repeatedly throughout the work shift • Ability to understand, analyze, and resolve technical problems in the work area • Ability to work the shift schedule where opening exists System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M-#LI-#Ref: #562-Joule Staffing - Edison

Job DescriptionJob Title: Fabrication Machine Operator (Pharmaceutical) Location: West Caldwell, New Jersey Type: Contract Compensation: $20 - $24/Hour (based on shift and experience) Contractor Work Model: Onsite Hours: Mon-Fri 1st shift: 6:15 AM - 2:30 PM 2nd shift: 2:15 PM -10:30PM 3rd Shift: 10:15 PM - 6:30 AM Duties and Responsibilities: • Operate vial filling machines, fabrication machines, and/or secondary packaging equipment including labels and semi-automatic packaging equipment.., • Meet established scrap rate goals., • Clean and set up manufacturing/packaging equipment., • Assure appropriate calibration stickers are current., • Record all necessary documentation in appropriate logbooks and batch records., • Communicate with IPC Operator and Supervisor on all issues concerning quality, components, and machine performance., • Palletize completed work and transport to warehouse as necessary., • Complete downtime log accurately and contemporaneously., • Assure that all reconciled labeling; e.g. pouch stock, inserts, shipper labels and waste is properly accounted for., • Communicate mechanical issues and other Production information with incoming and outgoing shifts., • Knowledgeable of all appropriate SOP’s and their practical application. Qualifications: • Must be able to successfully pass a respirator fit test to wear periodically, • Prior Pharma packaging experience required, • Ability to be gowned for manufacturing – wear safety glasses, hearing protection, full face/half mask respirator, latex gloves, Tyvek suit, • Must possess good manual dexterity and visual acuity, basic reading, writing, verbal and math skills, • Must be able to lift and move 25-49lbs throughout shift, • High School Diploma or equivalent System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #562-Joule Staffing - Edison

Job Description Do you have the need for speed? Do you thrive in a fast paced, energetic work environment that focuses on serving our customers? If so, K1 Speed is the place for you. As the nation’s indoor electric karting leader and innovator for over the past decade, K1 Speed does not compromise on the quality and value of the product we offer. Through our industrial go-karts and excellent staff, our passion is to show the world how fun karting can actually be. As a Track Operator, you will be at the core of the day to day operations, leading and guiding our customers to a fun, safe karting experience. Is this you? Duties and Responsibilities: • Provide excellent customer service to all K1 Speed visitors, • Run races precisely, on time and safely, • Maintain track cleanliness at all times, • lifting required, • Standing for long periods of time, • Enthusiastically brief guests on safety rules before entering the track, • Assist guests with needed safety equipment, • Control races in a safe manner to maximize the FUN for guests, • Efficiently load, unload, and charge karts Job Requirements: • Must be at least 18 years of age, • Provide proof of identity and eligibility to work in the United States, • Must have reliable transportation, • Weekends are a must!, • Must be able to read, write and speak English, • Must be able to communicate effectively in front of large groups, • Must be able to adhere to all company policies and procedures, • Must be willing and able to drive the karts daily, • Must be able to remain calm under stressful situations and effectively respond to safety concerns. **By applying to this position, you agree that you can preform the duties listed above.

Job Description Unit Pack is a family-owned and operated company with over 60 years of experience in packaging liquids, creams, gels, serums, oils, and pastes in single-use flexible packages. Our packaging solutions include customized designs, classic sachets, and affordable and high-quality pouches showcasing your brand. At our Certified Organic and FDA-registered facility, we maintain rapid changeover ability and consistent on-time delivery, ensuring that customer needs are always met. Our long-standing partnerships in cosmetics, pharmaceuticals, and industrial industries have made us a trusted name in the business for three generations. Job Summary: As a Production Line Operator, you will be responsible for operating and maintaining the machines to ensure efficient production of high-quality goods. Your primary focus will be on inspecting packages, monitoring machine performance, and maintaining a clean and organized workstation. Attention to detail, physical strength, and technical skills are essential for this role. Requirements: ● The job requires the ability to lift up to 30 pounds without assistance. ● You must stand for prolonged periods of time. ● Climbing tall equipment to replace parts in a safe manner. ● You will be working in a loud production floor environment, and proper hearing protection is mandatory. ● You must have a strong eye for detail to continuously inspect and focus on small details of produced goods. ● Inspect 100% of packages during production, including checks on print quality, welds, and fill volume. ● Maintain the correct position at all times while operating the machine. ● Keep the workstation clean and organized, properly arranging tool trays, scale tables, and roll tables. ● Keep the work station stocked with necessary supplies: cleaning supplies, wipes, gloves, etc. ● Assemble boxes and fill them with the correct number of packages while adhering to designated weight requirements. ● Replenish raw materials, while also disposing of waste properly ● Replace wear parts to maintain a high level of quality in production ● Check boxes for leaks and perform leak tests. ● Clean the production line at required times following work instructions to prevent downtime, interruptions, and defective packages ● Identify and replace defective parts on the machine. ● Accurately complete all quality control paperwork, following instructions and performing necessary checks. Report issues with paperwork to the quality control team promptly. ● Record all machine stoppages using the Down Time Log, communicating with mechanics to accurately document stations and actions performed. ● Complete all tasks outlined in the Machine Operators Work Instructions on a daily basis. ● Attend weekly Machine Operator meetings to stay updated on any changes or improvements. ● By diligently executing these responsibilities, you will contribute to the overall efficiency and productivity of the production process and ensure the delivery of high-quality goods to customers. *Please note that this job description is subject to change as needed based on the evolving requirements of the role and the production environment. \nCompany Description Unit Pack is a family-owned and operated company with over 60 years of experience in packaging liquids, creams, gels, serums, oils, and greases in single-use packages. Our packaging solutions include customized designs, classic sachets, and affordable and high-quality pouches showcasing brands. At our Certified Organic and FDA-registered facility, we maintain rapid changeover ability and consistent on-time delivery, ensuring that customer needs are always met. Our long-standing partnerships in cosmetics, pharmaceuticals, and industrial industries have made us a trusted name in the business for over three generations. Unit Pack is a family-owned and operated company with over 60 years of experience in packaging liquids, creams, gels, serums, oils, and greases in single-use packages. Our packaging solutions include customized designs, classic sachets, and affordable and high-quality pouches showcasing brands.\r\n\r\nAt our Certified Organic and FDA-registered facility, we maintain rapid changeover ability and consistent on-time delivery, ensuring that customer needs are always met. Our long-standing partnerships in cosmetics, pharmaceuticals, and industrial industries have made us a trusted name in the business for over three generations.

Job Description At 4over, we are committed to building a diverse and inclusive workplace welcoming to people of all backgrounds. Providing our employees with job training and opportunities for growth, development, and advancement. We take pride in fostering a safe environment for all employees in our climate-controlled plants. Summary: The Assistant Press Operator assists the Press Operator and Lead Press operator in the basic setup and maintenance of the presses verifying proper paper sheet sizes and types. They are also responsible for ensuring that all presses are supplied and fed with required quantities of paper and other consumables. Schedule: 2nd shift, Monday - Friday, eight or more hours per day, five days per week based on business needs. Primary schedule will be 2:00 PM – 10:00 PM, or similar. Training may occur at other times. Salary Range: $19.00 To 25.00 Hourly Compensation commensurate with experience. At time, we are not engaging with agencies or third-party recruiters. Thank you for understanding. DUTIES AND RESPONSIBILITIES • Assist press operators in setting up, adjusting, and maintaining printing presses to ensure optimal performance., • Load and unload paper, ink, and other materials onto the press, ensuring that stock is properly aligned and ready for printing., • Monitor print runs for quality, ensuring color consistency, proper alignment, and overall print quality. Report any issues to the press operator immediately., • Assist in mixing ink and maintaining proper ink levels for consistent color reproduction throughout production runs. Ensure that inventory levels for materials are regularly checked and maintained., • Identify minor technical issues with the press and assist in troubleshooting and resolving them under the guidance of the press operator., • Clean presses, rollers, and other equipment regularly to ensure optimal printing conditions and prevent malfunctions., • Provide general support to the production team, including preparing materials for upcoming jobs, organizing job orders, and ensuring that all tools and equipment are properly prepared and cleaned., • Actively remove waste items for recycling, • Complete and process all required paperwork, records, documents, etc., • Regularly perform general housekeeping duties in your work area(s), • Adhere to all safety policies and protocols and maintain a safe working environment, • Assist in cultivating an interdependent safety culture by reporting workplace hazards, related injuries, illnesses and or/near misses to management immediately, • Attend all department/company meetings, • Wear all assigned Personal Protective Equipment (PPE) when required, • Other duties as assigned For an extensive list of responsibilities, duties and physical demands/work environment please refer to the attached Job Description. EXPERIENCE AND QUALIFICATIONS EDUCATION, LICENSES, CERTIFICATIONS, EXPERIENCES: • 1 year experience of working within a fast-paced production or manufacturing environment, • High School Diploma or GED equivalency, preferred CRITICAL KNOWLEDGE, SKILLS, AND ABILITIES REQUIREMENTS: • Problem-Solving and Adaptability: Strong problem-solving skills when faced with unexpected challenges, such as machine malfunctions, material shortages, or errors in print quality. Ability to adapt to new printing technologies or changes in production schedules, ensuring smooth operations despite changes., • Time Management & Efficiency: Ability to manage multiple print jobs simultaneously, ensuring deadlines are met without sacrificing quality. Organizing workflows, preparing materials in advance, and optimizing print runs for efficiency and cost-effectiveness., • Attention to Detail: Precision in monitoring print jobs to ensure all details, such as color accuracy, image sharpness, and print placement, meet the required standards. Detecting small defects or inconsistencies during production and taking corrective action immediately.

Job Description 2nd Shift Saw Operator / Cut Shop Schedule: 3:00 PM – 11:30 PM Pay Rate: $21/hr (Based on experience) Job Type: Temp-to-Hire We are seeking an experienced Saw Operator / Cut Shop Associate to join our 2nd shift production team. The ideal candidate will have experience operating saw equipment and the ability to accurately measure, cut, and prepare wood materials according to specifications while maintaining high-quality standards. Responsibilities: • Operate upcut saws and table saws to cut materials accurately according to job specifications, • Measure materials using tape measures and other measuring tools, • Inspect finished cuts to ensure accuracy and quality requirements are met, • Follow all safety procedures while operating machinery, • Maintain a clean and organized work area, • Support daily production goals in a fast-paced manufacturing environment Qualifications:, • Previous experience operating upcut saws and/or table saws required, • Ability to read and interpret measurements accurately, • Strong attention to detail and commitment to quality, • Ability to safely operate production equipment, • Manufacturing, woodworking, or similar production experience preferred, • Reliable and safety-focused team player Opportunity: Temp-to-hire position with potential for long-term employment based on performance and attendance.

Job Description At 4over, we are committed to building a diverse and inclusive workplace welcoming to people of all backgrounds. Providing our employees with job training and opportunities for growth, development, and advancement. We take pride in fostering a safe environment for all employees in our climate-controlled plants. Summary: The Cutter Operator I is responsible for the setup, adjustment, and safe operation of all cutting equipment to prepare product to be packed, collated, or bound, ensuring the meeting of customer specifications, in accordance with company policies and procedures. Schedule: 1st shift, Monday-Friday, eight or more hours per day, five or more days per week based on business needs. Primary schedule will be 6:00 AM – 2:00 PM, or similar. This is an on-site position requiring the employee to be present physically. Salary Range: $17.00 To 19.00 Hourly Compensation commensurate with experience. At this time, we are not engaging with agencies or third-party recruiters. Thank you for your understanding. • Maintain and operate batching system to ensure the completion of assignments, • Identify priority jobs to be completed, • Review job tickets and strategically plan work processes to meet customer specifications for custom jobs, • Troubleshoot machines, if possible, to resolve any problems and/or notify production management, • Replace worn cutting blades with hand tools, as required, • Set up job assignment specifications, obtain approval and run product once authorized by supervisor or Plant Manager, • Monitor apparatus during run, adjust as needed to ensure adherence to specification including operating speed, • Complete and process all required paperwork, records, documents, etc., • Regularly perform general housekeeping duties in your work area(s), • Adhere to all safety policies and protocols and maintain a safe working environment, • Assist in cultivating an interdependent safety culture by reporting workplace hazards, related injuries, illnesses and or/near misses to management immediately, • Attend all department/company meetings, • Other duties as assigned For an extensive list of responsibilities, duties and physical demands/work environment please refer to the attached Job Description. Qualifications EDUCATION, LICENSES, CERTIFICATIONS, EXPERIENCES: • High School Diploma or GED equivalency; or one-year related experience with Polar or Saber cutting machines in a manufacturing environment and/or training; or equivalent combination of education and experience, preferred

Job Description Fabrication Operator Fairfield, NJ Full Time Entry Level Fabrication Operator in Fairfield, NJ 1st Shift Pay $17.50 per hour – $19.75 Based on experience Fulltime, Benefits, and Weekly Pay iBoost Talent is hiring for a Full-Time Fabrication Operator with Turret Punch Press experience in Fairfield, NJ. Impact is proud to offer an industry leading benefits and wellness package, with eligibility for some programs beginning Day 1! Our positions are full-time, year-round employment with paid training. We offer: • 5 Days of PTO, • 6 Paid Holidays, • Paid Sick Leave, • Up to 50% of health insurance premiums paid, • Access to a retirement plan, financial fitness, and employee savings programPay $17.50 – $19.75 per hour based on experience 1st Shift Hours - 6:00am – 2:30pm Mon – Fri Job Summary: This position is responsible for safely setting up, operating, and shutting down various CNC fabricating, forming & VMC Machines. This position will have the responsibility to ensure the machine parts and production units are meeting or exceeding the required quality standards. Work assignments will be scheduled based on training proficiency. Duties and Responsibilities: • Set up and inspect the first piece against engineering drawings, ensuring accurate information transfer for efficient production runs., • Conduct routine quality control checks during setup and production, addressing any issues promptly., • Collaborate with the Supervisor and Team Leader to prioritize tasks according to the job board., • Organize, sharpen, and maintain tools and dies as needed., • Train operators based on Supervisor's instructions and plan for upcoming jobs by preparing materials and paperwork in advance., • Perform routine setup, troubleshooting, and machine maintenance, including cleaning and checking tools., • Communicate with management regarding any issues and the priority of upcoming setups., • Conduct basic quality checks and make necessary adjustments to ensure parts meet specifications., • Load and unload machines, verifying correct part processing., • Perform lower-level tasks such as filing and sanding as required., • Adhere to safety rules and maintain good housekeeping practices., • Report hazardous situations and participate in safety programs., • Lead or participate in Continuous Improvement Teams and maintain a clean workstation according to 5S procedures., • Support overall departmental and corporate goals by performing additional duties as assigned.Job Requirements:, • Basic math, communication, and troubleshooting skills., • Proficiency in using measurement tools (e.g., tape measure, calipers) and interpreting engineering drawings and BOMs., • Ability to follow directions and work independently with minimal supervision., • Flexibility to adapt to changing priorities and tasks., • Mechanical aptitude and problem-solving skills., • Experience in setting up and operating CNC equipment., • Team-oriented with the capability to train others in CNC techniques., • Reliability in attendance and punctuality., • Understanding of basic lean principles (5S, Kanban)., • Proficiency in English is preferred.Education and Experience:, • High school diploma, GED, or technical certification preferred., • Minimum of 4 years of experience operating specialized equipment or 3 years of CNC setup experience.Working Conditions/Physical Demands:, • Stand for 8 hours a day, performing coordinated hand movements and frequently lifting up to 50 lbs., with occasional lifting up to 100 lbs., • Tasks may involve repetitive motions, overhead reaching, bending, and exposure to sharp edges, dust, and high noise levels., • Work in a non-temperature-controlled environment; steel-toed shoes are required.

Job Description Position Summary Fabuwood is seeking a skilled and dependable Edge Bander Machine Operator to operate our new edge bander during the night shift. This role is responsible for machine setup, operation, quality assurance, basic troubleshooting, and maintaining consistent production output. The ideal candidate will follow established Standard Operating Procedures (SOPs), perform routine machine inspections, and ensure all products meet Fabuwood's quality standards while maintaining a safe and efficient work environment. Key ResponsibilitiesMachine Operation Operate the edge bander independently throughout the night shift. Set up and monitor the machine to ensure optimal performance and production efficiency. Perform routine machine inspections, including copy wheels, glue pot, pressure settings, and other critical components. Monitor production output and make minor machine adjustments as needed. Quality Assurance Inspect finished products to ensure they meet quality standards and specifications. Immediately identify and report product defects or quality concerns. Follow established Standard Operating Procedures (SOPs) to maintain consistent product quality. Equipment Maintenance Perform basic troubleshooting to resolve minor mechanical or operational issues. Report equipment malfunctions or maintenance needs promptly to the Supervisor and Maintenance team. Maintain a clean and organized work area around the machine. Safety & Documentation Follow all company safety policies and proper material handling procedures. Complete required production reports, machine checklists, and documentation accurately. Communicate production updates, quality concerns, and operational issues to the appropriate team members. QualificationsRequired Previous experience operating manufacturing machinery or industrial equipment strongly preferred. Basic mechanical aptitude with the ability to perform minor troubleshooting. Strong attention to detail and commitment to product quality. Ability to read and follow written Standard Operating Procedures (SOPs). Reliable, self-motivated, and able to work independently during the night shift. English proficiency required; Spanish is a plus but not required. Benefits Weekly Pay Company Matching 401(k) Program Health Insurance Dental Insurance Vision Insurance Life Insurance Paid Time Off (PTO) Paid Holidays About Fabuwood Fabuwood is the leading kitchen cabinet manufacturer in the United States. We believe that your kitchen cabinets should help create a sanctuary that offers the perfect balance of functionality and ambiance. With a wide selection of styles, materials, and finishes, Fabuwood provides beautiful, high-quality cabinetry while making luxury kitchens affordable without compromising on comfort, quality, or efficiency. Schedule: Monday – Thursday, 5:00 PM – 3:00 AM

Job DescriptionFrimpeks Inc. needs a mixing operator for UV coating materials production. The Operator helper must have basic reading and math skills. Mechanical and problem solving abilities are necessary. Must be proficient with reading a scale. Must be able to interpret the product formulations. Basic computer skills are a plus. Strong work ethics and being a team player are important. Primary Responsibilities: • The Mixing Machine Operator helper supports machine operator to dump or pour specified amounts of materials into machinery and equipment., • The Mixing Machine Operator helper observes production and clean the working area for safety., • The Mixing Machine Operator helper job function is to also stop mixing or blending machines when specified product qualities are obtained, and open valves and start pumps to transfer mixtures., • Getting the material to be ready packed. Forklift driving experience is required. Job Types: Contract, Full-time

Job Description Job Title: Production Operator C Classification: Hourly, Full Time, Non-Exempt Department-Location: Production - NJ Direct Supervisor: Production Supervisor Job Summary: The Production Operator “C” position is an entry-level position that primarily focuses on ensuring product quality control by utilizing various sampling and analytical testing protocols. This position also supports multiple departmental non-essential or critical functions as directed by supervision (supports B, A, and Lead Operators). This position requires some computer skills for data entry, e-mail communication, and the creation of work requests. This position may require working a rotating schedule. Supervisory Responsibilities: • None Essential Responsibilities: • Assists the Lead Operator or A Operator in monitoring process equipment and making necessary adjustments, as directed, to maintain process parameters as specified within Standard Operating Procedures (SOP’s)., • Performs sampling and analysis to maintain process and finished product specifications., • Maintains operation of filter presses by placing them on or offline for cleaning., • Loads waste materials into hoppers from filter presses., • Maintains salt storage area and adds salt to each saturator as needed. Must have the ability to safely operate a front-end loader (heavy equipment)., • Maintains the brine guard filters by replacing the filtering media as needed., • Maintains the body feed tanks by adding water and cellulose bags to each tank as required., • Operates and maintains plant utility equipment (air, water, steam, etc.) as directed., • Archives and organizes process records as instructed by supervision., • Provides housekeeping throughout the facility. Keeps the plant in order/clean condition. Maintains an inventory of necessary supplies for various departments as instructed by supervision., • May be assigned facilities maintenance duties as needed., • Performs inventory reconciliation on the laboratory reagent chemicals., • Provides support during railroad drills., • Assists with answering phones during off-hours., • Assists with the handling of non-EHS railcars., • Assists with electrolyzer cell rebuilding., • Always wears appropriate safety equipment., • Provides awareness level support to on-site incidents., • Serves as a member of The Facility Security Staff., • Provides escort service for facility visitors., • Performs other duties as assigned by supervision. Required Skills/Abilities: • This is a non-EHS job function., • Must have the capability of using Fall Suppression Equipment., • Must have a valid driver’s license and reliable transportation., • Medically qualified to participate in the Hazmat Team*., • Must be able to pass a 10-panel controlled substance testing and random testing after that., • Must be able to pass a background investigation check and maintain good standing order, as per TSA’s TWIC criteria., • Medically qualified means the employee must submit to an annual physical which may include a drug screening. Education and Experience: • High School diploma or equivalent. Experience working in a chemical manufacturing facility is a plus. Physical Requirements: • Frequently climbs stairs and ladders., • Frequently bends, stands, and lifts to 40lbs., • Must be able to work outdoors in different climate conditions., • Must be able to sit for extended periods., • Must be able to walk on secure elevated process platforms more than 15-foot heights. This position description is not intended to be and should not be construed as an all-inclusive list of responsibilities, skills, or working conditions associated with this position. While this position description is intended to reflect the position's activities and requirements accurately, management reserves the right to modify, and or remove duties as necessary. This is a Safety Sensitive Position within the organization. Kuehne is an Equal Opportunity Employer (M/F/Disabled/Veteran)

Company: Jetro / Restaurant Depot Location: 577 Winters Avenue, Paramus, NJ 07652 Job Type: Full-time Sector: Warehouse Team Member - Union Compensation: $17.56 - $18.15 an hour Position Summary: Move merchandise throughout the warehouse from receiving to a customer's car door. Complete required paperwork necessary to support the function. Tag or mark orders as requested. Carefully move product from the staging or storage areas into the truck or trailer being loaded. Slot move product as necessary and complete the paperwork to support that function. Comply with all safety, security, regulatory, and company policies. Tasks & Accountabilities: • Responsible for warehouse operational procedures including sorting, loading/unloading activities of product processing and documentation and provide information regarding holes., • Prior to the product being stored, count all product, compare to the manifest, and check all inbound shipments for damage, infestation and production dates, • Report shortages, overages, damage, the appropriate manager, • Compare the quantify, quality, labeling and consignee address to the customer order to ensure all outgoing shipments are complete and correct, • Safely and efficiently operate machinery and equipment as required, and assist in the unloading or loading of product moving into or out of warehouse, • Participate in the physical inventories as required, • Maintain clean, neat, and orderly work areas and operate in a manner that promotes safety, • Assist in maintaining the security of the warehouses, • Other duties as assigned Required Skills & Qualifications: • Experience with the service, production, or support role having greater responsibility to perform all (or most) of the standard work within the function, • High school degree or GED equivalent, • One year of experience in related area of responsibility, • Experience leveraging technology to perform daily tasks, including familiarity with MS Office applications web navigation & basic hardware functions, • Strong oral and written communication, problem solving and interpersonal skills; ability to quickly build rapport with both internal teammates and Smart Warehousing business units, • Proven track record of taking initiative to accomplish tasks in creative ways with a sense of urgency and assertiveness, • The HiLo Operator is responsible for operating a forklift to move, locate, relocate, stack, and count merchandise. The Operator is accountable for the safe and efficient operation of the vehicle and may also be required to perform Order Filler and Checker duties., • Operate all equipment in a safe and efficient manner following prescribed work methods Physical Demands: • Consistently throughout the day employees are required to sit, talk and hear and when necessary climb, crouch or crawl., • Operate the equipment using hands to fingers, manually carry, move merchandise, • Drive or ride in a motor vehicle., • Lift and/or move up to 50 lbs

Join our Worldwide Flight Services family and contribute to the timely delivery of cargo shipment, luggage, business to customer delivery, and on-time flights while operating safely and securely. We perform at the highest level for our customers every day, and strive to be an exceptional leader in our industry with our teams of cargo, passenger, ramp handling, and technical service experts in 164 airport locations, 18 countries, and on 5 continents. Are you ready to take off on your next career with us? Mechanics should have experience in troubleshooting, repairing and maintaining all mechanical portions of the BHS and PBB. Mechanic must be able to work autonomously or with a work crew and know how to proficiently replace any mechanical device, structural portion or support involved with the efficient, safe operation of the BHS & PBB. Mechanics should be familiar with 3-phase 480v connections; however, they will only be responsible to work with voltages below 120v. Mechanics must be able to understand and work on single phase 110v and lesser voltage connections under the oversight and approval of the lead Mechanic. Responsibilities: • Maintain superior customer service and safe working practice at ALL times., • Troubleshoots, repairs, and maintains machinery and electrical equipment such as motors, electrical circuits, SICK ATR systems, baggage handling equipment and conveyor systems in accordance with diagrams, electrical drawings, operational manuals and manufacturer's specifications using hand tools and precision measuring and testing instruments., • Inspect diagnose and repair mechanical and electrical systems., • Communicate with various parties on the work performed and present status of specialty systems., • Analyze root causes of Electrical failures and propose remedy and resolution as well as continuous monitoring for ways to improve and optimize the system., • Interpret schematics and engineering drawings in reference to layout, location, and operation of the system(s)., • React to call outs from the Control Room Operator or manager executing service calls CM, PM and EM. Preventive Maintenance – Inspection, adjustment, cleaning, replacement and prepare follow-up CM work orders if needed. Minimum Requirements: • HS Diploma, GED or Equivalent, • Must be at least 18 years of age, • Valid driver's license, • Must be able to work a flexible schedule for a 24/7 operation including nights, weekends, and/or holidays, • Background check and drug screen required, • Must be able to attain and sustain an Airport I.D. Badge, • Experience in an industrial environment or minimum 1 year experience as maintenance mechanic, • Proven experience as a Welder with relevant work experience Preferred Skills: • Strong electrical trouble shooting, conveyor and control system, • Experience using a variety of welding equipment, system software (Siemens, Allen Bradley PLC Systems and WPS etc.), • Experience in working knowledge of mechanical and electrical systems and electromechanical devices up to 480 volts such as motors, DC Clutches, Switches, Panels and controls, etc., • DC Drives knowledge a plus and Welding techniques (Fillet Weld, Butt Weld, Weld Joints, Weld Types, Weld Edges, Welding Groove, Stringer and weaving beads, torch angle, forehand and backhand)., • Experience in repair of special purpose equipment using Machines - Semi- Automatic, Automatic or Manual tools (saws, squares, calipers etc.), • Experience working on (PBB) Jet Bridges Physical Requirements/Working Conditions: Employees work in the assured management areas of baggage, at repair stations, in and around jetbridges, or at airfields and often must meet strict deadlines to maintain flight schedules. Employees will be working with and exposed to the baggage handling system, jetbridge, mechanical parts, and vibration. Employees may be exposed to various noise levels due to aircraft engines and equipment. Employees bend, lean, and frequently reach ladders and scaffolding. Employees are required to regularly speak and hear. Employees are often required to reach with their hands and arms. Employees may be required to perform a variety of activities that could include standing, walking, bending, kneeling, crawling, and climbing throughout their day. Employees frequently lift and/or move items over 50 pounds with the help of teammates. Employees will lift parts and tools for long periods of time and handle equipment such as transportation systems. Perks & Benefits: Want your pay in advance? Access your pay when you need it through DailyPay app! Are you a top performer who thrives on recognition? On the spot awards offered through the Awardco Platform including gift cards and more! Need quality medical care? Multiple options for both full and part-time employees! Want WFS Employee Extras? Travel Discounts, Pet insurance, Discount Shopping & More! Looking to stay healthy and improve your life? Wellness Programs offered to all employees! Want to invest in your future? 401k program offered! Looking to grow and have a career with us? Opportunity for Internal Mobility and transfers available! WFS is an equal opportunity employer committed to employment equity and inclusion. We accept applications from all qualified individuals.

Ryder is hiring a Class A CDL Truck Driver in Totowa, New Jersey— offering weekly pay, excellent benefits, and a driving career you can feel good about. $1500 or more per week - And it gets better • Driver Positions Pay Weekly, • Solo Miles Pay: $0.75 (Box) - $0.80 (Dry) per Mile with 1600 Miles per Week, • Solo Stops Pay: $25.00 (Box) - $75.00 (Dry) per Stop with 5 - 10 Stops per Week, • Paid Training, • Schedule: Monday – Friday, • Start Time: 7:00 PM - 9:00 PM Deliver SOLO To: Hicksville NY, Rocky Hill CT, Albany NY, Binghamton NY, Batavia NY, Kingston PA, Taunton, MA, Marlton, NJ, and Odenton, MD Route: Home Daily Tractor Type: Day Cab and Straight Truck Trailer Type: Dry Van 53' and Box Truck 26' Equipment: Manual Pallet Jack and Lift Gate Ryder will Train you on all equipment needed to be successful Freight: Touch – Auto Parts Ryder Drivers operate well-maintained, safe trucks, 36 months or newer with 24/7 Roadside Maintenance and fueling at over 800 nationwide maintenance locations • Medical, Dental & Vision after 30 days, • Earn PTO starting Day 1. Up to 80 hours accrued in 1st year, • Uniforms, cell phone & boot allowance provided, • Drivers are the Captain — you make safety decisions, and your job is protected, • 401(k) rollover available now + company match at 1 year, • 12 weeks paid maternity leave(subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Autonomy on the road – Support behind the scenes. When becoming a Company Driver, Ryder purchases owner operator trucks while providing support during the transition and throughout your career. Join a team that listens, backs you up and helps you grow. Ryder is a community of proud women and men in logistics, including many Military Reservists and Veterans. Your contributions are recognized, valued, and appreciated. Let's build futures together. Refer and get rewarded with unlimited bonuses up to $1,500 for every hired Driver. EEO/AA/Female/Minority/Disabled/Veteran Requirements • Minimum 21 years of age, • Pass a Ryder Drug Test, • Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years, • Pass a DOT physical, • Pass a Ryder road test, • Provide appropriate CDL and endorsements for the position, • Must have Class A verifiable experience in a tractor trailer or comparable vehicle:, • 9 months experience within the past 3 years, OR, • 2 years' experience within the last 5 years, OR, • 5 years' experience within the last 10 years, • Ability to follow written and/or oral instructions, • Ability to read, interpret and apply laws, rules, regulations policies and/or procedures Responsibilities • Ensuring compliance with applicable federal and/or state laws, regulations, and/or agency rules, standards and guidelines, • Detecting and eliminating or minimizing safety hazards Maintaining accurate records and logs, • Loading/Unloading freight or assisting in the loading/unloading of freight if required by customer, • Performs other duties as assigned Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Founded in 1965, Universal Supply operates locations in five states, providing professional builders with the best in specialty building products, including roofing, siding, windows, doors, cabinetry, millwork and fasteners. The CDL Driver Boom Crane is responsible for the safe, efficient transportation of wall panels, trusses and other materials to job sites and other locations. This role requires maintaining a Class A or B Driver's license, inspecting and maintaining trucks, reporting shortages and claims to supervisors, and assisting in loading and storing of materials. Drivers must perform pre- and post-trip inspections, manage logs, and adhere to hours-of-service requirements. The CDL Driver Boom Crane may also operate specialized equipment such as articulated booms, knuckle booms, conveyors, or cable-over-sheave systems as required. Pay Range: $25.00 - $30.00/hour • Operates Class A or B commercial vehicles in a safe, compliant, and efficient manner., • Responsible for deliveries to both active construction sites and completed build locations; city-based deliveries and inter-state travel may be required., • Performs thorough pre-trip and post-trip DOT inspections to ensure vehicle safety and compliance with federal regulations., • Provides exceptional customer service by maintaining a professional demeanor, addressing client needs, representing the company positively during all interactions, and relaying messages received from customers while on job sites., • Organizes and secures loads to ensure safe transport and verifies orders for accuracy before departure and upon delivery., • Adheres to all regulations and safety guidelines established by the U.S. Department of Transportation (DOT) and complies with all regulations and conditions outlined in applicable permits., • Prepares and maintains accurate DOT-compliant logs of driving hours, on-duty time, and rest periods in accordance with federal regulations., • Delivers and unloads materials accurately and safely, ensuring customer satisfaction at the point of delivery., • Records all merchandise returned by truck and assists in unloading materials returned for credit, ensuring proper documentation and handling., • Safely and efficiently operates a truck-mounted forklift to load, unload, and transport materials at job sites., • Maintains the cleanliness and organization of the truck, ensuring it is well-kept and ready for operation., • Assist with stocking and organizing inventory in the warehouse and production areas., • Operates specialized equipment such as articulated booms, knuckle booms, conveyors, or cable-over-sheave systems as required., • Performs inspections of boom crane safety equipment to ensure proper function and compliance with safety standards., • Safely maneuver and position the boom crane to load and unload materials with precision and care., • Supervise work of associates involved in scope of operation., • Perform other duties as assigned., • Comply with all policies and standards., • Adheres to Company's commitment to workplace safety., • High School Diploma or GED required., • 3+ years CDL experience preferred., • Experience transporting and handling lumber and building materials required., • Experience operating boom trucks and truck-mounted cranes preferred., • Experience with load charts, rigging practices, and weight distribution for safe crane operation preferred., • Ability to do basic math, read orders, write instructions and complete forms., • Ability to effectively and professionally communicate with customers, other employees and supervisors using verbal and written skills., • Ability to deal constructively with conflict and recognize potential problems., • Maintain current operator's license and meet company driver qualification requirements., • Knowledge and ability to use safe lifting techniques., • Proficiency with or ability to learn current technologies (e.g. Smartphone, GPS and other necessary business applications)., • Ability to collaborate effectively with staff, dispatchers, and other drivers to ensure smooth operations and timely deliveries., • Knowledge and understanding of federal DOT regulations, logbook requirements, and HOS compliance., • Demonstrates comprehensive knowledge of crane and boom safety regulations and procedures, ensuring safe operation in compliance with industry standards., • Ability to lift, secure and transport loads safely using a boom crane., • Certified Drill Rig Operator-NCCCO Boom Certification preferred – maintain active accredited certification for equipment type (e.g. NCCCO, NCCER, CIC) preferred., • Class A CDL License required., • Class B CDL License required. Universal Supply Co., a Division of US LBM Holdings, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Job Description Class A CDL OTR Opportunities – Rental & Company Drivers GET $3K Sign In Bonus | Generous Fuel Discount | No Down Payment A good driver can make more than 13k average every week We are currently expanding our fleet and looking for CDL Class A drivers interested in Rental (Owner-Operator) or Company Driver positions. If your goal is consistent miles and a high weekly income, we have options tailored to your needs. New equipment: Late model trucks (2025–2026): Peterbilt, Kenworth, Volvo 860 & 760, Freightliner Cascadia Equipped with an APU, inverter, refrigerator, and microwave 53’ Dry Van trailers: Utility, Great Dane, Wabash Rider and pet policy available Owner-Operator Rent Option: Earn up to 88% of load revenue Average weekly gross: $9,000 – $14,000+ Consistent 3,500+ miles per week 3 Weeks Out, 3 Days Home Weekly direct deposits, or a quick pay option - be paid after every load Company Driver Position Available: $0.80 per mile 3,500+ miles weekly average Paid for all miles (loaded + empty) OTR schedule: 3 weeks out, 4 days home No-touch dry van freight Additional Benefits: Freedom to choose loads (no forced dispatch) Fuel savings program - Generous fuel discount Access to cash advances Referral bonuses Clean DOT inspections bonuses 24/7 dispatch and maintenance support Quick onboarding process Transportation assistance available SAP drivers accepted (marijuana cases only) Driver Requirements: Minimum 2 years CDL-A experience Able to stay on the road for OTR runs Clean driving record (no major violations for 2 years or DUI in the past 5 years) Get Started Today, Call: (872) 259-1406 Multiple options available — whether you want to drive, rent, or grow into ownership with a lease to purchase.

Local, regional, and OTR opportunities – immediate openings Looking for better pay, better lanes, or a better company? We work with multiple motor carriers nationwide and match drivers with the best available options based on your experience, license, and goals. If you are: non-CDL, CDL, CDL-A, new driver, experienced driver, looking to switch companies, or just want to see what you qualify for One response can open multiple opportunities. Why drivers are responding: multiple carriers to choose from, local, regional, and OTR positions, new and experienced driver options, weekly pay programs, fast approvals and quick starts, flexible routes and equipment types, owner-operator opportunities available We do not push you into one company. We match you with what fits you best. Who should respond: drivers unhappy with their current pay, drivers sitting at home without a truck, drivers wanting more consistent miles, drivers needing a fresh start, new CDL holders ready to get on the road, non-CDL drivers looking for entry-level opportunities If you can drive, we likely have something for you. How it works: you submit your request, we review what you qualify for, we contact you with available options, you choose what works best for you No pressure. No guessing. Just real options. Respond now to view available positions. Open seats are filling daily. Submitting a request does not lock you into anything.

Paterson, NJ, USA $60,000 - $120,000+ per year Other Full Time CDL-A DRIVERS: FIND YOUR FOREVER TRUCKING JOB $60,000 - $120,000+ | COMPANY, LEASE, AND OWNER OPERATOR POSITIONS Are you looking for a driving job that fits your life-not the other way around? I recruit for 25 top trucking companies nationwide, offering custom-matched opportunities based on your experience, goals, and home time needs. Whether you're a new CDL-A holder or a seasoned owner-operator, I can help you find your best route. As a former truck driver, I understand the long hours, the importance of home time, and what drivers really want. I work for you, not just the company. WHAT'S AVAILABLE: Company Drivers | Lease Operators | Owner Operators Regional, OTR, and Dedicated Routes CDL-A Required (OK if you need training - we've got you covered) PAY & BENEFITS: $60K - $120K+ annually based on experience and type of trucking Full Benefits Package: Medical, Dental, Vision, Paid Time Off 401(k) with Company Match Weekly Pay & Direct Deposit Paid Orientation & Training Programs Late-Model Equipment & 24/7 Driver Support HOME TIME THAT WORKS FOR YOU Flexible scheduling based on your availability and area. Be home when it matters most. Whether you're chasing top pay, more miles, better home time, or ownership opportunities, this is your chance to level up your driving career-with someone who knows the road and has your back. LET ME HELP YOU FIND YOUR FOREVER JOB. Contact: Tonia Baudoin 601-688-4141 toniabaudoin@gmail.com

Position Description Ryder is hiring a Class A CDL Truck Driver in Totowa, New Jersey- offering weekly pay, excellent benefits, and a driving career you can feel good about. See and Hear from a Ryder Employee who Drives for Us Here: https://RyderCareers.Video/CDL-Hiring You might be wondering what your paycheck will look like. $1500 or more per week - And it gets better + Driver Positions Pay Weekly + Solo Miles Pay: $0.75 (Box) - $0.80 (Dry) per Mile with 1600 Miles per Week + Solo Stops Pay: $25.00 (Box) - $75.00 (Dry) per Stop with 5 - 10 Stops per Week + Paid Training + Schedule: Monday - Friday + Start Time: 7:00 PM - 9:00 PM Apply Here with Ryder Today Spots are filling fast - click apply now to secure your spot. Questions? Call "Name" or text "CITY" to 555-555-5555 to speak with your recruiter today. Choosing a driving career is a big decision. Respect for your talent and experience while being upfront about pay, routes, and schedules are priorities at Ryder. + Deliver SOLO To:Hicksville NY, Rocky Hill CT, Albany NY, Binghamton NY, Batavia NY, Kingston PA, Taunton, MA, Marlton, NJ, and Odenton, MD + Route: Home Daily + Tractor Type: Day Cab and Straight Truck + Trailer Type: Dry Van 53' and Box Truck 26' + Equipment: Manual Pallet Jack and Lift Gate + Ryder will Train you on all equipment needed to be successful + Freight: Touch - Auto Parts Ryder Drivers operate well-maintained, safe trucks, 36 months or newer with 24/7 Roadside Maintenance and fueling at over 800 nationwide maintenance locations All the benefits you expect - without the wait. + Medical, Dental & Vision after 30 days + Earn PTO starting Day 1. Up to 80 hours accrued in 1st year + Uniforms, cell phone & boot allowance provided + Drivers are the Captain - you make safety decisions, and your job is protected + 401(k) rollover available now + company match at 1 year + 12 weeks paid maternity leave(subject to specific eligibility criteria, including work tenure) + Employee discounts on tools, vehicles, travel, tech & more Click here to see all Ryder Driving Opportunities:https://ryder-drivers.jobs/ Autonomy on the road - Support behind the scenes. When becoming a Company Driver, Ryder purchases owner operator trucks while providing support during the transition and throughout your career. Join a team that listens, backs you up and helps you grow. Ryder is a community of proud women and men in logistics, including many Military Reservists and Veterans. Your contributions are recognized, valued, and appreciated. Let's build futures together. Refer and get rewarded with unlimited bonuses up to $1,500 for every hired Driver. EEO/AA/Female/Minority/Disabled/Veteran Requirements + Minimum 21 years of age + Pass a Ryder Drug Test + Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years + Pass a DOT physical + Pass a Ryder road test + Provide appropriate CDL and endorsements for the position + Must have Class A verifiable experience in a tractor trailer or comparable vehicle: + 9 months experience within the past 3 years, OR + 2 years' experience within the last 5 years, OR + 5 years' experience within the last 10 years + Ability to follow written and/or oral instructions + Ability to read, interpret and apply laws, rules, regulations policies and/or procedures Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities + Ensuring compliance with applicable federal and/or state laws, regulations, and/or agency rules, standards and guidelines + Detecting and eliminating or minimizing safety hazards Maintaining accurate records and logs + Loading/Unloading freight or assisting in the loading/unloading of freight if required by customer + Performs other duties as assigned Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Software Powered by ICIMS Posted Date 13 hours ago (8/25/2026 7:19 AM) Requisition ID 2026-209055 Primary State/Province NJ Primary City Totowa Location (Posting Location) : Postal Code 07512 Category Drivers Home Daily Employment Type Regular-Full time Travel Requirements Driver Position Code 1000997

Jetro / Restaurant Depot Location: 577 Winters Avenue, Paramus, NJ 07652 Job Type: Full-time Sector: Warehouse Team Member - Union Compensation: $17.56 - $18.15 an hour Move merchandise throughout the warehouse from receiving to a customer's car door. Complete required paperwork necessary to support the function. Tag or mark orders as requested. Carefully move product from the staging or storage areas into the truck or trailer being loaded. Slot move product as necessary and complete the paperwork to support that function. Comply with all safety, security, regulatory, and company policies. Responsible for warehouse operational procedures including sorting, loading/unloading activities of product processing and documentation and provide information regarding holes. Before the product is stored, count all product, compare to the manifest, and check all inbound shipments for damage, infestation and production dates. Report shortages, overages, damage, to the appropriate manager. Compare the quantity, quality, labeling and consignee address to the customer order to ensure all outgoing shipments are complete and correct. Safely and efficiently operate machinery and equipment as required, and assist in the unloading or loading of product moving into or out of warehouse. Participate in the physical inventories as required. Maintain clean, neat, and orderly work areas and operate in a manner that promotes safety. Assist in maintaining the security of the warehouses. Other duties as assigned. Experience with the service, production, or support role having greater responsibility to perform all (or most) of the standard work within the function. High school degree or GED equivalent. One year of experience in related area of responsibility. Experience leveraging technology to perform daily tasks, including familiarity with MS Office applications web navigation & basic hardware functions. Strong oral and written communication, problem solving and interpersonal skills; ability to quickly build rapport with both internal teammates and Smart Warehousing business units. Proven track record of taking initiative to accomplish tasks in creative ways with a sense of urgency and assertiveness. The Hilo Operator is responsible for operating a forklift to move, locate, relocate, stack, and count merchandise. The Operator is accountable for the safe and efficient operation of the vehicle and may also be required to perform Order Filler and Checker duties. Operate all equipment in a safe and efficient manner following prescribed work methods. Consistently throughout the day employees are required to sit, talk and hear and when necessary climb, crouch or crawl. Operate the equipment using hands to fingers, manually carry, move merchandise. Drive or ride in a motor vehicle. Lift and/or move up to 50 lbs.

Looking for better pay, better lanes, or a better company? We work with multiple motor carriers nationwide and match drivers with the best available options based on your experience, license, and goals. If you are: Non-Cdl Cdl Cdl-A New driver Experienced driver Looking to switch companies Or just want to see what you qualify for One response can open multiple opportunities. Why drivers are responding Multiple carriers to choose from Local, regional, and Otr positions New and experienced driver options Weekly pay programs Fast approvals and quick starts Flexible routes and equipment types Owner-operator opportunities available We do not push you into one company. We match you with what fits you best. Who should respond Drivers unhappy with their current pay Drivers sitting at home without a truck Drivers wanting more consistent miles Drivers needing a fresh start New Cdl holders ready to get on the road Non-Cdl drivers looking for entry-level opportunities If you can drive, we likely have something for you. How it works You submit your request We review what you qualify for We contact you with available options You choose what works best for you No pressure. No guessing. Just real options. Respond now to view available positions Open seats are filling daily. Submitting a request does not lock you into anything.

Non-CDL Driver A Non-CDL driver is responsible for transporting different types of equipment from distribution centers to customer locations using a truck. They are also required to perform inspections before and after a trip and unload cased products from the trailer to customer facilities. These drivers also follow appropriate safety procedures to transport dangerous cargo and maintain logs of vehicle repair status and working hours. The essential functions of a Non-CDL driver include: • Operate vehicles up to and including 26k GVWR, • Complete company paperwork as required, enter equipment quantity count when loading and unloading vehicles, • Participate in the loading and unloading of equipment from vehicle, • Restock equipment correctly and according to standards set forth by the working location, • Maintain, configuration of orders, clean and maintain of company equipment and resources, • Assist in general maintenance of rental equipment such as lighting, grip, power distribution., • Bringing equipment up to factory specifications before returning to stock, • May operate assigned warehouse equipment-handling machines in compliance with safety standards and as set forth by the company. Machines include but not limited to pallet jacks, forklifts, hand trucks, and order pickers. Operator must be trained and certified prior to operating any "powered" equipment handling machines, • Participate in cross training as assigned, help and guidance for related work when necessary, • Provide training to new and existing employees, as well as interns as assigned The qualifications for a Non-CDL driver include: • Knowledge of FMCSA/DOT regulations, • Ability to follow instructions and complete required training, • Ability to work independently and/or as a team, • Understand and comprehend traffic signals, signs, right of way rules, • Ability to drive long distance during the day and night on all types of roads and in all types of weather, • Exposure to noise and vibration, • Exposure to dust and diesel fumes, • Hours may vary due to operational needs The competencies of a Non-CDL driver include: • Perform daily pre-trip and safety inspections on equipment, • Verify and complete required documentation and reports, • Maintain accurate daily logs, • Follow dispatch instructions and communicate with dispatch (e.g. delays, arrivals, equipment problems), as required, • Comply with all applicable laws/regulations, as well as company policies/procedures, • Able to utilize a smart device to communicate with others along with specific apps related to dispatch, hours of service, and payroll The physical demands of a Non-CDL driver include: • Ability to sit for extended periods of time., • Ability to bend, twist, squat, and climb in and out of a truck, • Ability to perform tasks that involve lifting and moving objects weighing up to 100 pounds multiple times a day The other requirements for a Non-CDL driver include: • No positive drug/alcohol test including pre-employment, random, post-accident or reasonable suspicion, • No more than 2 moving traffic violations (including no more than 1 preventable accident) during within the last 36 months, • No D.U.I. (Drug or Alcohol) convictions within the last 5 years, • No vehicular homicide, • No using a vehicle in the commission of a felony, • No reckless driving or speeding, • No leaving the scene of an accident (body injury or physical damage) As required The required education and experience for a Non-CDL driver include: • Must possess an active Class C license within the United States, • Must meet all other qualifications outlined in Sec 391 of The Federal Motor Carrier Safety Regulations, • High school diploma, or equivalent required, or two years of work experience may be substituted for a high school diploma, • Must be at least 21 years old, • Minimum of 2 years of full-time verifiable type driving of units up to and including 26k GVWR, • Able to speak and comprehend the English language written and verbal The pay range for this position is estimated to be $20.00-23.00/hour. Actual pay to be determined by the experience, knowledge, skills, and abilities of the applicant combined with location and alignment with market data. Additionally, we offer comprehensive health, dental, and vision insurance, paid time off, and a 401(k) retirement savings plan with matching contributions. PRG is an Equal Opportunity Employer. PRG is a drug-free work environment, pre-employment testing will be required. This is a safety sensitive position and will require pre-employment drug screening. Production Resource Group LLC participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. PRG cares about the safety of our employees and applicants. PRG does not use chat rooms for job searches or communications. PRG will never request personal information via informal chat platforms or unsecure email. PRG will never ask for money or an exchange of money, banking or other personal information prior to an in-person interview. Be aware of potential scams while job seeking. For information on job scams, visit, https://www.consumer.ftc.gov/JobScams or file a complaint at https://www.ftccomplaintassistant.gov/.

This role puts you at the center of airport operations, supporting aircraft, crews, and passengers with safety, precision, and exceptional service. Each shift, you'll work alongside a dedicated team in a fast-paced, dynamic environment where adaptability, teamwork, and customer focus are key. Your work is supported by both a safety & training network and a robust operations & management framework, allowing you to tap into expertise across functions to guide your efforts. With these interconnected support systems, you'll be part of a team committed to delivering top-notch service and meeting the intricate demands of luxury flight. This role is on-site, working from our concierge style Fixed Based Operator (FBO) location in Teterboro, NJ where you will be right at the heart of the action. As a key member of the FBO team, you will work closely with clients, passengers, crew, and fellow team members, providing an exceptional experience and ensuring smooth operations for each flight. Aviation operates on a dynamic schedule—things can change fast, and our success depends on team members who can adapt. We are looking for team members who thrive in a dynamic, around-the-clock operation and are open to working a flexible schedule to meet the needs of the operation, customers, and crews. We formally operate 24 hours daily, 7 days weekly. A Shift (7:00am - 3:00pm) is the initial assignment with potential for changes over time as our business needs and opportunities evolve. Training for this role is expected to last approximately 4–6 weeks. During the training period, hours may differ from the assigned shift listed based on operational and training needs. Once initial training is successfully completed, you will transition to the assigned shift. The posted salary ranges will default to that of your regional location and will not include any premiums. The baseline range for this non-exempt position will be as follows: $23.00-$24.00 hourly, plus a performance-based bonus up to 5% of annual salary. Minimum Requirements: • A High School Diploma, GED, or equivalent education, • A valid driver's license and a strong sense of responsibility, • Basic English communication skills (B1 level or above), • A courteous, respectful attitude and a reliable work ethic, • Preferably at least one year of mechanical experience, • Direct line and ramp experience preferred, but not required, • Willingness to work flexible hours — rain or shine, • Must be able to handle the demands of an active, on-the-move role, • A strong eye for quality and a natural focus on customer service, • The ability to stay cool, calm, and collected under pressure, • Someone who takes pride in doing things right, enjoys working outdoors Main Responsibilities: • Responsible for refueling and defueling all types of aircrafts on a daily basis, demonstrating knowledge of specific fueling requirements, • Provides towing and disconnecting services for all types of aircraft, • Executes hand signals in order to guide aircrafts during arrivals and departures, • Provides service to aircrafts using ground support equipment, e.g. use of GPU for aircraft engine starts and ground power, use of lavatory cart and emptying procedures, etc., • Communicates with employees and/or crew using radios in order to provide excellent customer service, • Assists in providing aircraft with ice, coffee, catering and other necessary services, • Provides transportation for customers and pilots to and from aircraft, hotels, restaurants and other parts of the airport with courtesy van or bus, • Assists with aircraft and hangar cleaning, as needed, • Assists with general grounds keeping (grass cutting, weeding, picking up paper and trash, general housekeeping, etc.) Desired Characteristics: • Handle ramp operations while following top-tier safety and quality standards, • Provide porter services — delivering luggage, cargo, and transporting crew and passengers, • Assist with aircraft movements, including towing, pushback, marshalling, and disconnecting, • Operate ground support equipment (GPU, water, lavatory services, etc.) with care and precision, • Keep things stocked and spotless by assisting with catering items, ice, coffee, and cleaning duties, • Support a strong safety-first culture by actively participating in safety and quality programs, • Report any hazards, near misses, or unusual occurrences to keep operations smooth and safe Benefits/Perks: Full time employees can enjoy selections from a comprehensive benefit package that fuels your passions both inside and outside of work. You can expect a wide array of financial, insurance, continued education and other employee benefits and perks: • Financial Perks: Base hourly pay + overtime paid over 40 hours in one week; holiday pay + paid time off (including 3 floating holidays); 401(k) benefits $1 for $1 match up to 6%; General Dynamics Employee Discounts., • Wellness and Health Perks: Multiple Medical, Dental & Vision insurance options for employee only or employee + additional family members; paid sick time; Employee Assistance Program; Wellness Programs; Health Awards, • Performance Perks: Annual Merit Increase opportunity; annual bonus potential up to 5%, • Continued Education Perks: Tuition Reimbursement for approved CE pursuits Physical Demands/Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to use their hands and fingers to handle, feel, or reach. The employee frequently is required to stand, walk, or sit. The employee is occasionally required to climb or balance, kneel, crouch or crawl. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds above their heads. Specific vision required for this job include, close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust and focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Additional Details: Jet Aviation is committed to selecting the best leaders through a thorough and structured hiring process. Candidates who move forward will engage with executive leadership and key stakeholders in a multi-stage review process. As part of our commitment to safety and security, all selected candidates must successfully pass pre-employment requirements before finalizing employment. At Jet Aviation eligible employees can enjoy a comprehensive package that fuels your passions both inside and outside of work. Your health and well-being matter to us. That's why we offer a competitive benefit package that includes health, dental & vision insurance, matching 401(k), health savings and flexible spending accounts, short-term and long-term disability, life insurance, employee assistance programs, health and wellness awards, generous paid time off, tuition reimbursement, employee discounts and more. Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Job DescriptionBenefits: • Competitive salary, • Free uniforms, • Opportunity for advancement, • Training & development Job Title: Snow Equipment Operator/Salt Truck Operator Employment Type: Seasonal with oppurtunity for year round employment in landscaping, sweeping serivces or power washing Compensation: Competitive hourly rate + overtime opportunities Job Overview: We are seeking reliable and experienced Snow Equipment Operators to join our winter operations team. As a Snow Equipment Operator, you will be responsible for clearing snow from our commercial client locations including entry roads, parking lots, and other designated areas to ensure safe access for vehicles and pedestrians during winter weather events. Key Responsibilities: • Operate snowplow trucks, wheel loaders, skid steer, dump trucks and other snow removal equipment safely and efficiently, • Monitor weather conditions and respond promptly to snow events, • Perform pre- and post-operation inspections of vehicles and equipment, • Apply salt or de-icing materials as needed, • Maintain accurate logs of work performed and materials used, • Communicate effectively with dispatch and team members, • Follow all safety protocols and company proceduresQualifications:, • Valid driver’s license (CDL preferred but not required), • Previous snow removal experience operating snowplow trucks or heavy equipment for large commercial and industrial properties, • Ability to work flexible hours, including nights, weekends, and holidays, • Physically fit and able to work in cold and challenging weather conditions, • Strong attention to detail and commitment to safety, • Reliable transportation to and from job sitesWhy Join Our Team:, • Competitive pay with overtime potential, • Seasonal bonuses for performance and reliability, • Opportunity for full-time employment after winter season, • Supportive team environment, • Training provided for qualified candidates

Job Description Mikula Contracting, Inc., a 79-year-old family-owned and operated business, is seeking an Experienced Heavy Equipment Operator with a Class A CDL license for an immediate opening. Mikula Contracting, Inc. provides commercial and residential customers with various excavation and demolition services. General Accountability: Heavy Equipment Operator Operates an excavator, loader, backhoe, bulldozer, and similar heavy machine equipment. Performs essential maintenance and minor repairs on excavators, loaders, bulldozers, and/or other heavy power equipment. Locates underground services before performing heavy equipment work. Monitors operations to ensure all health and safety standards are met. Aligns machines regarding stakes, markers, guidelines, and/or hand signals of other workers. Loads and moves dirt, rocks, materials, and/or other equipment. Drives and maneuvers equipment to remove topsoil, rocks, vegetation, and/or other materials to distribute and level earth or terrain. Coordinates machine's actions and/or activities for moving loads in response to hand or audio signals from crew members. Performs other duties as assigned or requested. General Accountability: Class A CDL Truck Driver A minimum of 1 year of experience driving tandem dump trucks. Monitors operations to ensure all health and safety standards are met. Performs other duties as assigned or requested. The Company reserves the right to add or change duties anytime. Job Qualifications: License/Certification: Current Class A Commercial Driver's License Skills: Must be able to perform essential operations of trucks and/or construction equipment. Must possess basic knowledge of machines and tools concerning safety, use, and repair. Must possess knowledge of applicable health and safety standards concerning heavy equipment operation. Must possess basic knowledge of the language and terminology used in this occupation. Must possess excellent verbal communication skills. Must possess excellent interpersonal skills. \nCompany Description Mikula Contracting, Inc., a family-owned and operated business, has been servicing all of New Jersey for 78 Years. We provide commercial and residential customers with various excavation, demolition, environmental, trucking, and soil materials services. We are continually expanding our clientele while enhancing our business every day. Throughout the years, Mikula Contracting has withstood the many challenges the volatile construction industry has faced while continuing to grow. Mikula Contracting, Inc., a family-owned and operated business, has been servicing all of New Jersey for 78 Years. We provide commercial and residential customers with various excavation, demolition, environmental, trucking, and soil materials services. We are continually expanding our clientele while enhancing our business every day. Throughout the years, Mikula Contracting has withstood the many challenges the volatile construction industry has faced while continuing to grow.

Job Description We are seeking an experienced Heavy Equipment Operator with a CDL Class B license and Tanker (N) endorsement for sewer and utility-related work, including emergency response calls. Responsibilities Operate tanker trucks and related heavy equipment Perform sewer, drain, and utility support work Respond to emergency service calls as needed Safely load, transport, and discharge materials Requirements Valid CDL Class B license Tanker endorsement (N) required Prior tanker and/or sewer experience Ability to respond to emergency/on-call work Reliable and dependable Preferred Sewer or drain cleaning experience OSHA 10 or OSHA 30 Competitive pay based on experience. Full-time, steady work. Local New Jersey jobs. \nCompany Description We specialize in drain cleaning, sewer line maintenance, camera inspections, hydro jetting, and related sewer services. We specialize in drain cleaning, sewer line maintenance, camera inspections, hydro jetting, and related sewer services.

Job Description At 4over, we are committed to building a diverse and inclusive workplace welcoming to people of all backgrounds. Providing our employees with job training and opportunities for growth, development, and advancement. We take pride in fostering a safe environment for all employees in our climate-controlled plants. Summary: The Cutter Operator I is responsible for the setup, adjustment, and safe operation of all cutting equipment to prepare product to be packed, collated, or bound, ensuring the meeting of customer specifications, in accordance with company policies and procedures. Schedule: 3rd shift, Monday-Friday, eight or more hours per day, five or more days per week based on business needs. Primary schedule will be 10:00 pm – 6:00 AM, or similar. This is an on-site position requiring the employee to be present physically. Salary Range: $17.00 To 19.00 Hourly Compensation commensurate with experience. At this time, we are not engaging with agencies or third-party recruiters. Thank you for your understanding. • Maintain and operate batching system to ensure the completion of assignments, • Identify priority jobs to be completed, • Review job tickets and strategically plan work processes to meet customer specifications for custom jobs, • Troubleshoot machines, if possible, to resolve any problems and/or notify production management, • Replace worn cutting blades with hand tools, as required, • Set up job assignment specifications, obtain approval and run product once authorized by supervisor or Plant Manager, • Monitor apparatus during run, adjust as needed to ensure adherence to specification including operating speed, • Complete and process all required paperwork, records, documents, etc., • Regularly perform general housekeeping duties in your work area(s), • Adhere to all safety policies and protocols and maintain a safe working environment, • Assist in cultivating an interdependent safety culture by reporting workplace hazards, related injuries, illnesses and or/near misses to management immediately, • Attend all department/company meetings, • Other duties as assigned For an extensive list of responsibilities, duties and physical demands/work environment please refer to the attached Job Description. Qualifications EDUCATION, LICENSES, CERTIFICATIONS, EXPERIENCES: • High School Diploma or GED equivalency; or one-year related experience with Polar or Saber cutting machines in a manufacturing environment and/or training; or equivalent combination of education and experience, preferred CRITICAL KNOWLEDGE, SKILLS, AND ABILITIES REQUIREMENTS:

Job DescriptionConverting Line Operator — Laminating, Slitting & Sheeting Location: Fairfield, NJ 07004 Schedule: Full-time with overtime opportunities; All Shifts Available A Day in the Life You clock in at our Fairfield manufacturing facility and review the day’s work orders. After a quick safety check, you and your assigned helper stage materials and prepare a laminator, sheeter, or slitter for the first run. Throughout the shift, you monitor controls, watch web paths, verify specifications, and make small, approved adjustments to keep production running smoothly. You continually scan for surface defects, measure output against job requirements, and document production counts, material usage, and any downtime. If something sounds off or a roll isn’t tracking correctly, you stop the machine and alert a supervisor or maintenance right away. Between jobs, you handle basic cleaning and operator-level care so the next run starts efficiently. You keep your area organized, communicate clearly with helpers and teammates, and support the team by taking overtime when it’s available. What You’ll Handle • Start up, run, monitor, and shut down laminators, sheeters, slitters, and related equipment with a focus on safety., • Work from work orders and standard procedures to meet production requirements., • Track equipment performance during runs and make routine adjustments within guidelines., • Partner closely with your assigned helper to move materials efficiently—large lines are not run alone., • Inspect in-process materials and finished goods for visible defects and confirm they meet job specs., • Record production data, including quantities, materials, and downtime., • Stay alert for unusual sounds, motion, or conditions; stop machines and report issues promptly., • Perform routine cleaning and basic operator maintenance., • Maintain housekeeping and follow all machine guarding, PPE expectations, and safety rules., • Collaborate with helpers, supervisors, quality, maintenance, and fellow operators., • Support production needs by working overtime when available.Required Qualifications, • Comfort operating or working around large production/industrial equipment., • Ability to follow written and verbal instructions., • Strong focus on safety, quality, and detail., • Reliable attendance and on-time performance., • Capacity to stay attentive while monitoring running equipment., • Team-oriented communication skills., • Willingness to learn laminating, sheeting, and slitting operations., • Openness to overtime when available or required., • High school diploma or equivalent.Preferred Qualifications, • Experience in machine operation, production, manufacturing, or heavy equipment., • Exposure to laminators, sheeters, slitters, printing, converting, or roll-fed machinery., • Mechanical aptitude and an eye for abnormal machine behavior., • Comfort with work orders, quality checks, and manufacturing documentation.Training & Onboarding We provide hands-on training covering: • Laminators, sheeters, slitters, and related production systems, • Machine controls and standard operating procedures, • Safe operating practices, • Product and material specifications, • Basic quality inspection techniques, • Production documentation and recordkeeping, • Communication and teamwork with assigned helpers No prior experience on Unifoil’s specific equipment is required—if you’re reliable, mechanically aware, and ready to learn, you’ll fit right in. Physical & Work Environment • Active manufacturing setting around large, moving equipment., • Standing and walking for extended periods., • Regular bending, reaching, and material-handling tasks., • Use of required personal protective equipment., • Working around typical manufacturing noise and motion., • Overtime based on production needs and availability.About Unifoil Unifoil is a global leader in laminating, coating, and metallizing technologies. For over 50 years, we’ve delivered innovative specialty substrates, products, and solutions to brand owners, packaging designers, printers, and other customers worldwide. Our team blends manufacturing expertise, technical innovation, and a commitment to environmentally conscious solutions to help customers create distinctive packaging and specialty applications.

Job Description We are looking for a Welder - Diesel Mechanic - Machine Operator to join our team! You will be responsible for repairing various vehicles and equipment Responsibilities: • Repair Diesel Equipment, • Perform routine maintenance, • Use diagnostic tools to test vehicle components, • Perform quality inspections, • Machine Operator Qualifications: • Previous experience as a mechanic, • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Ability to thrive in a fast-paced environmentCompany DescriptionSolid Waste Transfer Station visit www.Lemcortransfer.com for more informationSolid Waste Transfer Station visit www.Lemcortransfer.com for more information

Job Description Seeking a Licensed Wastewater Operator for a direct hire opportunity with our client in Roseland, NJ. This position offers full benefits including PTO, Medical, Dental and 401k! Salary is between $80,000 - $94,000 per year (based on experience) Responsibilities • Operate and optimize physical, chemical, and biological treatment systems, including DAF, pH neutralization, equalization, and solids handling., • Monitor daily water, softener, and cooling tower readings., • Perform routine testing and coordinate required grab and composite sampling., • Maintain logbooks, records, and data for monthly DMR reporting and NJDEP compliance., • Adjust chemical feed rates based on wastewater conditions., • Perform preventive maintenance and repairs on pumps, blowers, valves, sensors, motors, and other equipment., • Troubleshoot mechanical and electrical issues to minimize downtime., • Follow OSHA, LOTO, confined space, and all plant safety procedures.Qualifications, • Required: New Jersey Wastewater Treatment Operator License – Class N-1 or N-2., • 3–5 years of industrial/manufacturing experience., • Minimum 2 years of wastewater treatment experience; food/beverage manufacturing preferred., • Knowledge of NJDEP regulations and industrial pretreatment requirements., • Experience repairing/rebuilding pumps and replacing motors, valves, aerators, and filters., • Ability to run and fit PVC and black piping., • Strong documentation and recordkeeping skills., • Microsoft Office experience preferred.Physical Requirements, • Ability to work in industrial and wastewater environments and outdoors in varying weather., • Ability to stand, walk, climb stairs/ladders, bend, reach, and lift up to 50 lbs. If you are interested in learning more about this role, please submit your resume for immediate consideration! INDH Powered by JazzHR Uq6qwIUcos

Job Description Summary: Esposito Construction is seeking an Equipment Operator with field experience for various job sites across the state. Candidates must have experience running loaders, dozers, excavators and various other machines. Candidates must also have knowledge of site work, earth moving, and utilities installation. Experience with pipe and/or utility work is a plus. We are seeking someone who is motivated, hands-on, self-starter with a proven track record. Benefits: • Medical Insurance paid by Esposito Construction for single rate., • 401(k) eligibility with company contribution., • Dental insurance eligibility., • Vision insurance eligibility., • Paid time off., • Pay: Flexible, experience based $25-40 DOE Responsibilities: • Operate heavy machinery for excavation, trenching, and backfilling on underground utility and heavy civil projects, • Dig and prepare trenches for water, sewer, storm, and other pipe installations, including working safely around existing utilities, • Load, move, and place dirt, gravel, and other materials as needed to support pipe installation and site work, • Assist in assembling, laying, and connecting pipe systems in trenches according to project specifications, • Coordinate with subcontractors and crew members to ensure smooth workflow and timely completion of tasks, • Stage and manage equipment and materials on-site to keep operations running efficiently, • Provide input for daily and weekly reports, including progress, material usage, and equipment operation, • Follow strict safety protocols, maintain trench safety, and contribute to a culture of safety awareness on every job Qualifications: • Must be able to work in team setting, • Pipe experience preferred but not required, • Physically capable to work on your feet and lift/move material productively, • Must have a good pair of work boots, • OSHA 10 and/or 30 Preferred Esposito Construction LLC is an Equal Opportunity-Affirmative Action Employer Minority / Female / Disability / Veteran / Gender Identity / Sexual Orientation / Age

Job Description Fabuwood is seeking a hands-on and results-driven CNC Night Shift Supervisor to lead our CNC production team. This position is responsible for safely executing the nightly production plan, maintaining product quality, minimizing equipment downtime, developing employees, and ensuring a clear handoff to the next shift. The ideal candidate is a visible and engaged floor leader who understands what each machine and operator is working on throughout the shift. This individual will respond quickly to safety, quality, material, staffing, and equipment issues while taking full ownership of the shift’s overall performance. Schedule: Monday–Thursday, 5:00 PM–3:00 AM Key Responsibilities Production Leadership • Prepare the CNC team and equipment before the start of production., • Conduct a focused pre-shift stand-up meeting to communicate safety expectations, production priorities, staffing assignments, and potential concerns., • Assign operators to machines based on production needs, employee skills, and workload., • Monitor production progress throughout the night and ensure established goals are achieved., • Maintain awareness of what each machine and operator is working on., • Follow the CNC Night Shift Leader Standard Work during every shift., • Complete an accurate and detailed handoff to the incoming shift. Safety and Quality • Promote and enforce all company safety policies and operating procedures., • Respond immediately to safety concerns and ensure corrective actions are taken., • Monitor product quality and address defects or process inconsistencies promptly., • Ensure operators follow approved work instructions, quality standards, and machine procedures., • Maintain a clean, organized, and safe production environment. Equipment and Downtime Management • Monitor CNC machine performance and respond quickly to equipment issues., • Coordinate with Maintenance when repairs or technical assistance are required., • Track machine downtime and support efforts to restore production safely and efficiently., • Identify recurring equipment or process issues and escalate them to the appropriate department., • Ensure required machine inspections and startup checks are completed. Team Development • Provide clear direction, coaching, and performance feedback to CNC operators., • Train employees on safe machine operation, quality expectations, and production procedures., • Address attendance, performance, and workplace concerns in a timely and professional manner., • Encourage accountability, teamwork, and continuous improvement., • Identify employee development and cross-training opportunities. Qualifications • Previous supervisory or team leadership experience in a manufacturing environment., • CNC machining, woodworking, cabinetry, or related production experience strongly preferred., • Strong understanding of production workflow, machine operation, quality control, and workplace safety., • Ability to troubleshoot production issues and make effective decisions in a fast-paced environment., • Strong leadership, organization, communication, and problem-solving skills., • Ability to remain actively engaged on the production floor throughout the shift., • Basic computer skills and experience completing production reports., • Bilingual English and Spanish preferred. Benefits • 401(k), • 401(k) matching, • Dental insurance, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Retirement plan, • Vision insurance

Job Description Job Title: CNC Machinist / Machine Operator (Full-Time or Part-Time) Location: Carlstadt, NJ Schedule: 7:00 AM – 4:30 PM (Part-time hours flexible | Optional OT available) Pay: Competitive (Commensurate with experience) About Us We are a high-volume, precision machine job shop in Carlstadt, NJ. We take pride in quality craftsmanship, a clean work environment, and supporting our team with steady work and strong support. Whether you're looking for full-time stability, a flexible part-time schedule, or are a retired machinist wanting to keep your skills sharp, we’d love to have you on board. What You’ll Do • Machine Setup & Operation: Perform setups and operate precision equipment, including Mazak CNC 2-axis lathes, HAAS VF2, and Bridgeport Torq-Cut 22 3-axis Machining Centers., • Blueprint Interpretation: Read, analyze, and execute setups directly from technical blueprints and engineering drawings., • Quality Assurance: Conduct first-piece and in-process inspections using micrometers, calipers, and gauges, documenting measurements accurately., • (Bonus) CNC programming skills are a plus, though not required! What We’re Looking For • Experience: 3+ years in a professional machine shop environment., • Work Ethic: Reliable, punctual, and attentive to precision detail., • Flexibility: Open to full-time or part-time schedules (retirees are highly welcome to apply!). Why Join Us? • Flexible full-time or part-time arrangements., • Consistent day shifts with optional overtime opportunities., • A respectful, team-oriented shop floor.