Trabajos irrigation en Rochester, New YorkCrear alertas

Job Description JOB SUMMARY Direct facility operations to achieve safe, efficient, and cost-effective performance across maintenance, landscaping, snow removal, budgeting, and vendor management. Coordinate operational activities of the property to obtain optimum efficiency and economy of operations by performing the following duties personally or through supervisors. ESSENTIAL FUNCTIONS • Manage landscaping operations, including staffing, scheduling, training, seasonal planning, irrigation and turf care, planting and pruning, equipment and supplies, vendor oversight, quality inspections and corrective action; previous landscaping management experience is required., • Manage snow-removal operations, including staffing, scheduling, training, weather monitoring, pretreatment and deicing, route priorities, equipment inspections, traffic controls, incident reporting, and post even review. Enforce requirements for personal protective equipment, pre-shift briefings, safe equipment operation, hazard identification, slip-and-fall prevention, and compliance with company policies and application regulations; previous snow-removal management experience is required., • Establish and implement facility policies, procedures, and performance goals., • Coordinate activities of maintenance department to affect operational efficiency and economy., • With the General Manager, analyze department budget requests to identify areas in which reductions can be made, and allocate operating budget., • Confer with administrative personnel and review activity and operating reports to determine changes in programs or operations required., • Prepare directives to maintenance supervisors outlining policy, programs, and/or operational changes to be implemented., • Ensure assets are being managed effectively in areas such as property services, cost control, vendor and tenant relations. OTHER DUTIES • This description is not meant to be an all-inclusive list of duties and responsibilities but constitutes a general definition of position scope. SUPERVISORY RESPONSIBILITIES Manage and supervise employees in the Maintenance departments. Responsible for the overall direction, coordination, and evaluation of these departments. Carry out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Works with outsourced contractors including facility cleaning, maintains a clean and friendly environment. MEASUREMENT Facilities Managers are measured based on the following criteria: • Performance against assigned budget., • Performance of Mall Operations. Appearance Inspections Safety-Workers' Compensation Claims Mall property, vehicles, equipment and asset management • Display effective vertical and horizontal communication with all other functional areas., • Develop annual objectives and goals. EDUCATION & EXPERIENCE: • Three to five years related experience and/or training; or equivalent combination of education and experience. KNOWLEDGE, SKILLS & ABILITIES: • Ability to read, analyze, and interpret general procedures, technical procedures, or governmental regulations., • Ability to write reports, business correspondence, and procedure manuals., • Ability to effectively present information and respond to questions from groups of managers, vendors, customers, and the public., • Comprehend and interpret complex verbal and written documents., • Ability to calculate figures and amounts such as discounts and interest, related to purchase orders and budgets., • Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of instructions and deal with several abstract and concrete variables., • Must have valid NYS Driver’s license, • Must be able to work nights, weekends and holidays as needed. PHYSICAL DEMANDS AND WORK ENVIRONMENT The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Regularly required to sit, stand; walk; bend, climb, push, pull; use hands to handle or feel; reach with hands and arms; talk or hear; and smell., • Occasionally required to stoop, kneel, and balance., • Occasionally required to lift and/or move up to 20 pounds., • Specific vision abilities include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus., • Specific hearing abilities include hearing and understanding (aided or unaided), dialogue in conversational tones and levels, transmitted either in person or via radio or telephone, recognizing low, middle, and high range sounds such as whistles, bells, buzzers, gongs, and sirens such as those commonly used in alarm systems., • The work environment is indoors and outdoors, frequently exposed to all types of weather conditions., • The noise level in the work environment is usually moderate. The salary range listed for this position represents the anticipated compensation based on experience and qualifications and may vary depending on internal factors and applicable laws.

Job DescriptionDescription: About Caliber Service Management We are a family of value-driven companies offering a full range of soft and hard facility management services (Landscaping, Snow Removal, Property Enhancements, Project Management, Lot Services and Stormwater Management) that aid in providing safe and attractive facilities. With over 100 years of industry experience collectively, our team of subject matter experts is committed to effective performance and successful partnerships with asset, property and facility managers as well as real estate investment trusts. We take tremendous pride in helping solve, support, and maximize the true potential of each property. Caliber is a privately held LLC with annual revenue greater than 50 million and we proudly serve more than one thousand high performing commercial, industrial and retail locations. With more than forty million square feet of exterior grounds care, emergency response, construction and snow removal, our workforce includes more than one hundred and fifty team members and over one thousand service partners. Job Summary *This role is 80%+ on the road within a region. Commercial landscape and snow removal management professionals encouraged to apply. The SPO – Western NY, provides management and oversight within their designated geographic zone, Buffalo/Rochester/Syracuse and through the Southern Tier. They build strong relationships, facilitate communications in the field between all key stakeholders, maintain Quality Control of Service Vendor performance and resolve problems within the zone. Responsibilities • Communicate and build relationships and trust with the client locations and regional management, • Deliver Vendor Quality Control programs within the region, • Read, Understand and Implement detailed facilities maintenance Scopes of Work and Service Level Agreements, • Facilitate communications in the field between team members, Caliber Operations Managers, Caliber Service Management Affiliates, client locations, • Manage the client; up to and including client Regional Vice Presidents., • Conduct Service Validations, • Train and guide vendors as required, • Provide guidance and feedback to Caliber Service Management, • Maintains Quality Control Reports, • Prepare Vendor score cards, • Resolve customer problems by applying resources as necessary, • Conduct site surveys for various trades and services, • Engage and entertain the customer as appropriate, • Conduct training and presentations concerning scope of work to store personnel, • Foster a positive team environment, • Ensure confidentiality of internal and external data, • Perform ad-hoc projects and other duties as assigned, • Responsibilities may require emergency support, mobilization and extended engagement helping serve/solve local, regional and national market clients needs; scheduled and non-scheduled including but not limited to property damage and snow emergencies Professional Skills • Customer Service – Advanced, • Verbal Communication – Proficient, • Written Communication – Proficient, • Teamwork – Proficient, • Relationships – Advanced, • Organizational Awareness – Proficient, • Problem Solving – Proficient, • Process Orientation – Proficient Role Specific Skills • Proficiency in Microsoft Office tools (Word, Excel, Access, Power Point), • Able to utilize Disc Profile Tools, • Capable of working outside in supervisory-inspection capacity in all weather conditions, • Able to climb ladders and perform roof top maintenance inspection tasks, • Capable of extensive driving (day, night and inclement) and commercial air travel, • Able to travel nationwide on short notice on a limited basis, • Excellent driving record Compensation includes Vacation, Holiday Pay, 401k, profit-sharing incentives. Job Type: Full-time Pay: $68,000.00 - $75,000.00 per year Requirements: Minimum Qualifications • Bachelor’s degree preferred Other Relevant Qualifications • Strong multi-unit enterprise facilities management experience preferred in the following skills: Landscaping, Irrigation, Snow-Ice Programs, Interior and exterior facilities management, and Janitorial Services, • Experience in a trade, • Retail experience or experience servicing retailers, • Experience in facilities industry

Direct and execute the physical installation of custom drip/smart irrigation systems and low-voltage architectural landscape lighting. Review landscape irrigation and lighting plans for constructability, efficiency, and long-term performance. Deep comprehensive knowledge of irrigation controllers, s

Description Step into a high-precision CNC environment in Mohawk Valley, NY where a fast-growing aerospace manufacturer operates cutting-edge equipment and values hands-on technical ownership.This Working Maintenance Supervisor / Lead CNC Maintenance Technician opportunity puts you at the center of

Review landscape irrigation and lighting plans for constructability, efficiency, and long-term performance. Deep comprehensive knowledge of irrigation controllers, smart water-management tech, hydraulic calculations, and low-voltage lighting transformers, fixtures, and wiring. Irrigation & Lighting

Every truck that sits broken overnight is a route that does not run the next morning.In a real, someone-is-counting-on-that-truck way.The mechanic at this yard keeps the fleet moving.When you fix it right, you see the result the next day when it rolls out the gate.Just a truck running the way it sho

Schedule: Full time Availability: Applying To This Requisition Allows You To Be Considered For Multiple Opportunities.Please Provide As Much Availability That Works With Your Schedule.Age Requirement: 18 years or older Location: Rochester, NY Address: 1500 Brooks Ave Pay: $21.Job Posting: 10/26/2026

A leading manufacturing organization is seeking a.This role is ideal for a skilled maintenance professional who enjoys troubleshooting, solving mechanical and electrical problems, and working in a fast-paced manufacturing environment.The Reliability Maintenance Technician will perform preventive and

Maintenance Technician - 2nd Shift.The primary opening is on second shift, with first-shift opportunities also available.Our client, a longstanding family-owned, values-based manufacturer is seeking a Maintenance Technician to join its growing maintenance team.This onsite position is ideal for a han

The CNC Mill Operator - Machinist at Thaler Defense Systems is a technical role responsible for the precision machining of high-performance aerospace and defense components.Working under the guidance of the Production Supervisor, this individual ensures that mission-critical parts meet exact toleran

This is a great opportunity to join a growing car wash company.They were founded 8 years ago and have eight locations.They are adding three to five new washes annually.They have an excellent company culture and offer great work/life balance.This person will need to be located in the northern part of

Responsibilities: Operate seated and standing forklift to transfer product from warehouse floor to load trucks; Unload and stock incoming merchandise and load outbound trailers; Check, verify, and audit merchandise and enter data into remote data terminals; Replenish pick areas and fulfill merchandi

Nesco Resource - - Responsibilities: Operate forklifts safely to transport, load, unload materials; Wash and prep film materials; Maintain inventory movement records; Collaborate with production and warehouse teams; Perform equipment checks and report issues.

Frito Lay - [Warehouse Associate / Forklift Operator] As a Forklift Operator at Frito Lay, you'll: Safely operate a forklift to load and unload pallets and individual cases to and from trailers; Pick appropriate cases according to order using required technology; Load trailers via carts or stack cas

Aerotek - - Responsibilities: Build and assemble PODs, metal workstations, and inventory shelving units on the robotics floor; Work as part of a team to complete PODs within timeframes; Perform repetitive physical tasks including lifting, pulling, pushing, and positioning materials; Use hand and po

Aerotek - - Responsibilities: Build and assemble PODs, metal workstations, and inventory shelving units; Operate hand tools and power tools; Follow blueprints/measurements for assembly; Maintain safe, clean workspace and safety procedures; Collaborate with team to meet production targets.

PrideStaff - - Responsibilities: Assemble large sheet metal components using hand and power tools; Read blueprints and follow packing instructions; Adhere to safety and PPE requirements; Package components according to instructions; Lift up to 50 lbs.

Randstad - - Responsibilities: Operate high-speed manufacturing lines; Perform machine setup and changeovers; Maintain uptime and quality Production; Monitor equipment and outputs; Troubleshoot minor line issues.

Nesco Resource - - Responsibilities: Assemble optical components per instructions; Perform basic assembly with hand tools; Inspect components for quality and fit; Maintain clean, organized workstation; Follow safety procedures and document production.

Aerotek - - Responsibilities: Assemble HVAC units, subassemblies, and components using hand tools; Read and interpret work instructions and drawings; Install mechanical and electrical components; Inspect parts and assemblies for quality; Cross-train across assembly stations.

Nesco Resource - - Responsibilities: Assemble HVAC units and subassemblies using hand and power tools; Read and follow work instructions and drawings; Install mechanical and electrical components including wiring, motors, and controls; Inspect parts and assemblies for quality and document results;

Aerotek - - Responsibilities: Assemble custom electrical panels and industrial equipment; Read and interpret blueprints and wiring diagrams; Route, terminate, and label wiring with precision; Inspect finished assemblies for quality and compliance; Read layout drawings and work instructions.

Every truck that sits broken overnight is a route that does not run the next morning.In a real, someone-is-counting-on-that-truck way.The mechanic at this yard keeps the fleet moving.When you fix it right, you see the result the next day when it rolls out the gate.Just a truck running the way it sho

Howmet Aerospace - 181 McKee Road - Responsibilities: Operate forging equipment (ring mill/press/heat treat); Load/unload furnaces and perform heat treat operations; Read blueprints and process specifications; Perform in-process and final inspections with precision tools; Maintain 5S and a safe, org

Aerotek - - Responsibilities: Read and interpret blueprints; Assemble pumps per prints; Use hand and power tools; Ensure accurate assembly per customer specifications; Cross-train across departments.

Alro Steel - - Responsibilities: Fill and prepare material orders for shipment; Operate overhead cranes and forklifts; Operate metal saws, shears, and lasers; Commitment to safety and accurate order fulfillment; Participate in extensive training and mentoring.

We provide precision-engineered products to a variety of industries, focusing on quality, reliability, and customer satisfaction.With a skilled team and advanced equipment, Polyshot is committed to efficient production, consistent quality, and continuous improvement.Safety, integrity, and teamwork a

If you're looking for a special place to build or grow your career, you've found it.Whether you're an experienced professional, a recent college graduate or somewhere in between, IDEX is a place where you can apply your existing skills and learn new ones in an environment where you can make an impac

Responsible for assembly and/or scanning of small or medium sized parts, fitting and/or adjustment of interrelated parts and/or assembly, adjustment and/or repair of sub-assemblies and major assemblies per process sheets.Could also be responsible for teardown, cleaning and reassemble of refurbs.Main

If you're looking for a special place to build or grow your career, you've found it.Whether you're an experienced professional, a recent college graduate or somewhere in between, IDEX is a place where you can apply your existing skills and learn new ones in an environment where you can make an impac

The primary responsibility for Machine Operator/Slicer is to attend machines while the machines slice parts.The operator is responsible for maximizing the quantity of parts while maintaining the quality of parts.Installs proper oils and coolants.Adjusts machines accordingly for quality and quantity.

As an Assembler 2 at MKS Instruments, you will play a key role in building high-quality electronic and electro-mechanical products that support our customers around the world.Working from detailed work instructions, drawings, and specifications, you'll assemble complex products, identify opportuniti

Responsible for assembly and/or scanning of small or medium sized parts, fitting and/or adjustment of interrelated parts and/or assembly, adjustment and/or repair of sub-assemblies and major assemblies per process sheets.Could also be responsible for teardown, cleaning and reassemble of refurbs.Main