Trabajos product testing en Plainfield, New JerseyCrear alertas

Job Description Petco Veterinary Services offers relief veterinarians the chance to work in two distinct settings: Vetco Vaccination Clinics and Vetco Total Care full-service veterinary hospitals. In both environments, you'll have the opportunity to make a difference in the lives of pets every day. As a relief veterinarian with Petco, you'll enjoy flexible online scheduling, allowing you to choose shifts that work best for your lifestyle. There's no minimum or maximum number of shifts required, and we offer a variety of weekday and weekend hours to fit your needs. You also have the freedom to set your own rate for each shift, ensuring you have control over your compensation. Continue practice activities outside of Petco shifts and enjoy NO agency fees! Our appointment-based model helps manage patient flow and ensures you're able to leave on time, while our trained, experienced staff handles the operations, letting you focus on providing the best care possible. Stay up to date with important clinic news, policy updates, and product announcements through our monthly newsletter. And as a bonus, enjoy a 15% discount on all Petco products and services, perfect for treating your own pets. What's the difference between Vetco Vaccination Clinics and Vetco Total Care Hospitals? Vetco Vaccination Clinics: These clinics focus on basic wellness checks, vaccinations, heartworm testing, and microchip placement. We do not offer surgeries, emergency, or illness care. Our locations are primarily within Petco stores, with a few housed in advanced mobile van units. Vetco Total Care: These full-service veterinary hospitals offer a complete range of services, from preventive care and diagnostic workups to outpatient surgeries and dental procedures. Our hospitals are equipped with digital dental X-rays, Butterfly IQ+ Vet ultrasound imaging, and fully equipped surgery suites, including heated hydraulic surgery tables, full anesthesia monitoring, and more. Licensed and trained hospital staff ensure the highest standards of care, with no overnight or emergency on-call shifts. Requirements • Doctor of Veterinary Medicine state license in good standing, • Appropriate state-specific licensing to perform all shift functions including the ability to perform blood draws & administer vaccines, • DEA in good standing required for full-service Vetco Total Care hospital relief shifts, • Ability to provide Professional Liability Insurance + license defense policy, • Compliance with all local state and federal mandates, • NC Supervising Veterinarian Agreement (we will provide) Ready to Make a Difference? Vetco Vaccination Clinics and Vetco Total Care full-service hospitals provide access to high-quality veterinary care in 48 states. Help us continue providing exceptional care to pets across the country. Explore available locations for relief shifts and discover where you can make an impact. Together, we're making pet healthcare better. Send an email or schedule a call directly with one of our Talent Advisors to learn more! Explore all open shift locations on the Vetco Clinics website. New Jersey state bid rates average $136-170/hr. Shift rates may vary depending on the clinic location and duration of the selected shift. Job Posted by ApplicantPro

Job Description Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customer’s products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along the distribution process. Hours/Shift: • 1st Shift from 6:00am – 2:30pm, • 2nd Shift from 2:30pm – 11:00pm HOW YOU WILL CONTRIBUTE (Overview & Key Responsibilities): As an Industrial Refrigeration Mechanic, you will be responsible for conducting maintenance, setup, troubleshooting, repairs, preventive maintenance, and operation of industrial freezers/refrigerators and related production equipment used in a manufacturing environment. • Provides emergency/unscheduled repairs of industrial freezers/refrigerators and related production equipment during production and performs scheduled maintenance repairs during machine service., • Monitor industrial freezer/refrigerators performance and identify potential issues before equipment failures occur., • Prepares industrial freezers/refrigerators, machinery, and related production equipment for scheduled production runs., • Diagnose malfunctions and perform necessary repairs or replace defective parts., • Performs mechanic skills including, but not limited to, mechanical, electrical, pneumatic and hydraulic troubleshooting and repair of packaging and production machines., • Reads and interprets equipment manuals and work orders to perform required maintenance and service., • Perform daily routine preventive maintenance and maintain accurate daily repair logs., • Track inventory machinery/equipment with their respective spare parts., • Comply with OSHA safety and health rules., • Training: May be requested to provide training to future machine operators in their perspective roles., • Any additional duties as needed WHAT YOU NEED TO SUCCEED (Qualifications): • High school diploma or GED required; technical school, vocational training, or equivalent industrial maintenance or refrigeration experience preferred., • Bilingual in English & Spanish, strongly preferred, • 3-5 years’ of experience in an industrial maintenance mechanic role, preferably supporting industrial freezers, refrigeration systems, or related equipment in a manufacturing, packaging, or cold storage environment., • Knowledge with the following: Accepted practices and processes in the maintenance trades; electric motors, relays, PLCs, electro-mechanical equipment and systems found in machinery, including industrial freezer and refrigeration systems; servicing and maintenance of industrial equipment, including simple power, heating and cooling units., • Read and work from sketches, drawings and blueprints; understand occupational hazards and safety precautions of the machinery., • Ability to read and understand product specifications., • Forklift experience preferred, • Ability to lift up to 35 lbs. multiple times a day, • Ability to perform basic mathematical operations. Ability to bend, reach, kneel, and stand for extended period of time. WHAT WILL SET YOU APART (Competencies): • Good multitasking and prioritization skills., • Mechanically inclined., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Ability to work in a team environment., • Good time management skills., • Good analytical and problem-solving skills. WHY JOIN US: At Cryopak, we strive to offer a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Voluntary Accident, Critical Illness, and Hospital Indemnity Insurance, • Voluntary Life and AD&D, • Short-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job Description Service Technician – Direct Residential Thermal Diagnostics, Technical System Maintenance, and Customer Care Job Overview • Company: Uncle Mike's Home Service LLC., • Salary/Pay Rate: $25.00 to $35.00 per hour (Plus Performance Bonuses and Incentive Pay)., • Location: Lincroft, NJ., • Job/Employment Type: Full-Time., • Schedule: Monday to Friday (With weekend availability as needed)., • Mandatory Licences & Certifications: Valid Driver's License and EPA 608 Certification. The Opportunity You will serve as a premier residential specialist, executing critical thermal diagnostics and equipment maintenance across a high-density consumer market. This role provides the operational autonomy to manage your daily dispatch schedule while serving as the authoritative technical consultant for local homeowners. You will directly drive regional client retention and brand trust, backed by a stable firm that combines small-business heart with enterprise benefits. How You Will Make An Impact • Perform advanced physical diagnostics, mechanical repairs, and custom preventative maintenance on residential HVAC units., • Communicate technical malfunctions and structural repair paths clearly to property owners to build absolute trust., • Conduct microscopic component assessments and capture exact airflow, refrigeration, and electrical performance readings., • Execute seasonal technical tune-ups and complex diagnostic service evaluations across diverse heating and cooling configurations., • Catalog comprehensive field service findings, technical recommendations, and part requirements within the corporate database., • Manage, inventory, and secure company-issued testing instrumentation, trade tools, and your assigned service vehicle., • Enforce rigorous environmental safety protocols, handling chemical refrigerants strictly according to regulatory frameworks. Required Qualifications & Experience • Minimum of 3 years of verified field experience specializing in residential HVAC service and mechanical systems., • Active, non-expired EPA 608 Certification necessary to handle and recover regulated consumer refrigerants., • Valid driver’s license maintained in good standing to accommodate responsive residential territory travel., • Proven troubleshooting capabilities with the capacity to isolate intricate electrical and mechanical system failures independently., • Advanced personal communication skills and a meticulous, clean demeanor while operating inside client residences. Preferred Qualifications & Experience • Completed technical degree in HVAC-R technology, mechanical engineering, or a recognized vocational apprenticeship., • Hands-on familiarity with modern high-efficiency heat pumps, ductless mini-split arrays, and smart control interfaces., • Completed safety milestones including an active OSHA 10 card or specialized residential gas safety credentials. Compensation & Benefits • Competitive hourly compensation ranging from $25.00 to $35.00 scaled to residential mechanical troubleshooting mastery., • Robust financial incentives including immediate access to performance bonuses, incentive pay, and corporate referral rewards., • Stable financial infrastructure featuring a dependable weekly pay cycle and a comprehensive retirement savings program., • Elite health protection architecture including premium medical, dental, vision insurance, and a Health Savings Account., • Full group safety allocations covering flexible life insurance policies, disability protection options, and wellness programs., • Substantial paid leave benefits encompassing traditional vacation allotments, observed holidays, sick leave, and parental leave., • Provided corporate service vehicle, commercial gas privileges, complete field uniforms, and required protective safety equipment., • Fully funded technical professional development, ongoing product certifications, and interactive employee reward contests. About Us Uncle Mike's Home Service LLC is a premier residential mechanical contractor specializing in high-performance heating, ventilation, and air conditioning solutions. We maintain a family-oriented workplace culture built upon technical craftsmanship, clear communications, and uncompromised client care. Our leadership treats workforce satisfaction as a central pillar, providing our technicians with modern diagnostic tools, steady year-round hours, and an engaging environment. Uncle Mike's Home Service LLC is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors.

About Eos Energy Enterprises \n Eos Energy Enterprises, Inc. is accelerating the shift to American energy independence with positively ingenious solutions that transform how the world stores power. Our breakthrough Znyth™ aqueous zinc battery was designed to overcome the limitations of conventional lithium-ion technology. It is safe, scalable, efficient, sustainable, manufactured in the U.S., and the core of our innovative systems that today provides utility, industrial, and commercial customers with a proven, reliable energy storage alternative for 3 to 12-hour applications. Eos was founded in 2008 and is headquartered in Edison, New Jersey. For more information about Eos (NASDAQ: EOSE), visit eose.com. \n \n Overall Job Summary: \n The Electrical Systems Engineer is responsible for the design, integration, testing, and support of communications, uninterruptible power supply (UPS), auxiliary power, and related electrical systems. This role ensures system reliability, regulatory compliance, and successful deployment by collaborating with cross-functional teams throughout the project lifecycle. The engineer provides technical expertise in system architecture, power distribution, equipment integration, troubleshooting, and commissioning activities to support critical infrastructure and operational requirements. \n Job Responsibilities: \n\n • Design, integrate, and support communications, UPS, auxiliary power, and related electrical systems to meet project, customer, and regulatory requirements.\n, • Develop engineering deliverables including system architectures, single-line diagrams, wiring schematics, interface documentation, and technical specifications.\n, • Perform electrical analyses, equipment selection, and system sizing for power distribution, battery backup, UPS, and communications infrastructure.\n, • Coordinate with internal teams, customers, contractors, and vendors to ensure successful system integration and project execution.\n, • Lead troubleshooting, root cause analysis, and resolution of electrical, communications, and system integration issues during design, installation, and operation.\n, • Develop and execute testing, validation, commissioning, Factory Acceptance Testing (FAT), and Site Acceptance Testing (SAT) activities to verify system performance in partnership with Product teams\n, • Ensure compliance with applicable electrical codes, industry standards, safety requirements, and quality processes.\n, • Prepare and maintain engineering documentation, reports, configurations, and as-built records throughout the project lifecycle.\n\n Education/Experience: \n\n • Bachelor’s degree in electrical engineering or related discipline required\n, • Minimum 5 years of experience\n\n Skills/Abilities: \n\n • Experience with communications, UPS, battery backup, and auxiliary power systems.\n, • Ability to read and interpret electrical drawings, schematics, and technical documentation.\n, • Knowledge of electrical codes, standards, and engineering best practices.\n, • Strong troubleshooting, analytical, and problem-solving skills.\n, • Excellent written and verbal communication skills.\n, • Experience with critical infrastructure, transportation, utility, industrial, or telecommunications environments.\n, • Familiarity with SCADA, network communications, fiber optic systems, or industrial control systems.\n, • Experience supporting commissioning, field testing, and startup activities.\n, • Knowledge of AutoCAD, MicroStation, ETAP, SKM, or similar engineering software.\n\n Travel \n\n • Overnight/North America: 10-25%\n\n Working Conditions \n\n • Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 25 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.\n, • Factory - The worker may be subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, vibration, moving vehicles, electrical current, exposure to temperature changes or exposure to chemicals. While performing the duties of this job, the employee may be exposed to fumes, airborne particles, odors, dust, mists, and gases. The noise level in the work environment can be loud. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Machinery operation requires the use of safety equipment to include but not limited to eye safety glasses, hearing protectors, work boots, and lab coats. May be required to exert up to 50 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.\n\n

Client Overview A well-established manufacturing organization specializing in the design, development, and production of highly engineered products for regulated industries. The company offers a collaborative, hands-on environment where technical leaders have significant influence on product innovation, operational excellence, and team development. Our client is seeking an Engineering Manager - Manufacturing to lead a multidisciplinary engineering team focused on the design, development, qualification, and support of advanced power conversion products.\n \n Salary/Hourly Rate $160k - $200k\n \n Position Overview The Engineering Manager - Manufacturing will lead a multidisciplinary engineering team focused on the design, development, qualification, and support of advanced power conversion products. This role combines technical leadership with people management and will oversee both new product development and sustaining engineering activities.\n \n \nThe ideal candidate is a highly technical electrical engineering professional with deep power electronics expertise, strong leadership skills, and the ability to drive execution in a fast-paced, hands-on environment.\n \n Responsibilities Of The Engineering Manager - Manufacturing \n\n • Lead, mentor, and develop a team of electrical and mechanical engineers.\n, • Manage engineering priorities, resource allocation, and project execution to meet business objectives.\n, • Serve as the senior technical authority for product design, system architecture, and engineering decisions.\n, • Oversee the development of new products from concept through qualification and production release.\n, • Drive engineering performance, throughput, and continuous process improvement initiatives.\n, • Lead root cause analysis and corrective action activities related to design, testing, and field performance.\n, • Approve design documentation, engineering changes, test plans, qualification reports, and technical analyses.\n, • Coordinate cross-functionally with manufacturing, quality, operations, and supply chain teams.\n, • Support customer-facing technical discussions, design reviews, and proposal development activities.\n, • Manage sustaining engineering efforts including field support, product improvements, and component obsolescence.\n, • Establish and improve engineering processes, standards, and best practices.\n, • Manage select engineering projects and initiatives from planning through completion. \nRequired Experience/Skills For The Engineering Manager - Manufacturing \n\n • Minimum 10 years of electrical engineering and product development experience.\n, • Authorised to work in the United States (citizen or green card holder).\n, • Strong background in power electronics, power conversion systems, or switching power converter design.\n, • Minimum 3 years of technical leadership or engineering management experience.\n, • Proven experience leading and developing engineering teams.\n, • Experience with systems engineering, requirements management, verification planning, and product qualification.\n, • Ability to balance technical leadership with project and people management responsibilities.\n, • Experience conducting root cause analysis, failure investigations, and corrective actions.\n, • Strong project prioritisation, organisational, and decision-making skills.\n, • Excellent communication and customer-facing presentation skills.\n, • Ability to travel up to 10% as needed. \nPreferred Experience/Skills For The Engineering Manager - Manufacturing \n\n • Master's degree in Electrical Engineering or Power Electronics.\n, • Aerospace, defense, electronics, or other highly regulated manufacturing experience.\n, • Experience with APQP or other structured product development methodologies.\n, • Experience supporting products through qualification and production release.\n, • Familiarity with environmental, electromagnetic compatibility, and reliability testing standards.\n, • Experience with FMEA, FMECA, fault tree analysis, and other reliability engineering tools.\n, • Experience using ECAD tools such as PADS or similar schematic design software.\n, • Experience authoring technical proposals, compliance documentation, and customer-facing technical deliverables. \nEducation Requirements \n\n • Bachelor’s Degree in Electrical Engineering required.\n, • Master’s Degree in Electrical Engineering, Power Electronics, or a related discipline preferred. \nBenefits \n\n • Medical, Dental, and Vision Insurance\n, • Life Insurance\n, • 401(k) Plan\n, • Paid Time Off\n, • Paid Holidays\n, • Sick Time\n, • Relocation assistance available for qualified candidates\n, • Career advancement opportunities within a growing engineering organization \n

Job Description Job Title: Electric Motor Assembler Location: Linden, NJ (relocating to East Windsor, NJ) Company: Hansome Energy Systems Employment Type: Full-Time Pay Range - $20.00-$35.00 Per Hour - Depending on Experience, plus year end bonus About Hansome Energy Systems Hansome Energy Systems is a privately held industry leader in rotating electrical machinery, proudly supporting the U.S. Navy and other critical defense and industrial applications. Our team specializes in high-performance, precision-engineered equipment—designed, tested, and manufactured to excel in the most demanding operational environments. We are committed to technical excellence, product reliability, and ensuring mission readiness for every customer we serve. Location & Facility Transition This position is currently based at our Linden, NJ facility and will be relocating to our new East Windsor, NJ facility. Candidates must be able to work in Linden during the transition period and continue employment in East Windsor once relocation is complete. Position Overview Hansome Energy Systems is seeking detail-oriented Electric Motor Assemblers with strong mechanical skills to join our production team. This role focuses on the high-quality assembly of precision electric motors and related components used in critical defense and industrial applications. The position is hands-on, mechanically focused, and quality-driven—no testing responsibilities are required in this role. Key Responsibilities Assemble electric motors, stators, rotors, and sub-assemblies in accordance with engineering drawings, specifications, and work instructions. Perform mechanical assembly operations such as fitting, aligning, bolting, fastening, wiring, insulation, and winding as required. Use precision measurement tools (calipers, micrometers, gauges, etc.) to verify component and assembly dimensions and tolerances. Inspect parts and assemblies for workmanship, proper fit, completeness, and conformance to quality requirements before release to the next operation. Identify and communicate assembly issues, material discrepancies, or fit-up problems to supervisors or engineering support. Maintain accurate and legible production and inspection records as required. Follow all safety procedures, standard operating procedures (SOPs), and quality guidelines. Keep work area clean, organized, and in compliance with 5S/lean principles. Support continuous improvement efforts to enhance quality, efficiency, and workflow. Qualifications Required High school diploma or equivalent. Strong mechanical aptitude and hands-on assembly skills. 1–3 years of experience in mechanical assembly, manufacturing, or a related trade. Ability to read and follow mechanical drawings, prints, and written work instructions. Comfortable using hand tools, power tools, and precision measurement instruments. High attention to detail and pride in quality workmanship. Ability to lift up to 50 lbs and stand for extended periods during the shift. Willingness and ability to work in Linden, NJ and transition to East Windsor, NJ when the facility relocates. Preferred Experience working with electric motors, generators, or other rotating electrical equipment. Familiarity with winding, insulation, or electrical-related assembly work (a plus, but not required). Experience in a lean manufacturing or continuous improvement environment. Prior experience in defense or high-reliability industrial manufacturing (plus, not required). To comply with US export control laws, applicants must be a US person (as defined by 22 C.F.R. & 120.62.)

Job Description Job Title: Chemical Technician 1st Shift/2nd Shift/3rd Shift Job Description The Chemical Technician 1st Shift plays a key role in ensuring product quality and laboratory safety by performing chemical testing, maintaining adherence to ISO 9001 standards, and supporting quality control processes across raw materials and finished products. This position actively participates in safety initiatives, manages product and customer specifications within the quality management system, and helps resolve quality and process issues between the laboratory and production. Responsibilities • Prepare safety topics and lead weekly safety meetings to promote a strong safety culture in the laboratory., • Ensure the quality of products and maintain strict adherence to ISO 9001 standards in all testing and documentation activities., • Perform chemical testing and cover any area of testing required in the lab when needed or requested., • Monitor sample status in the QC database and close and release product test results in a timely and accurate manner., • Identify personnel-related issues within the lab, communicate them appropriately, and recommend resolutions to leadership., • Identify, communicate, and retrain team members to address errors made by both the lab and production, such as missing labels on sample cups, incorrect product or customer information on sample labels, missing test results, or erroneous data., • Recommend and support corrective actions to prevent recurring errors in sampling, testing, and data recording processes., • Enter all new customer and product specifications into the quality management system and maintain accurate, up-to-date specifications., • Validate Certificates of Analysis (C of A) first released from the quality management system and ensure that correct specifications are in place., • Initiate specification requests when no existing specifications are available for a product or customer., • Monitor raw materials in quality inspection, perform necessary testing, and release materials in a timely manner., • Resolve raw material specification issues by coordinating with appropriate stakeholders and ensuring compliance with quality requirements., • Collaborate with production and other departments to support blending and related processes through accurate testing and specification management., • Maintain accurate records and documentation for all testing, inspections, and specification changes in accordance with GMP and quality procedures. Essential Skills • Experience working in a GMP (Good Manufacturing Practice) environment and following established quality and documentation procedures., • Hands-on experience with chemical testing in a laboratory setting., • Strong knowledge of wet chemistry techniques and raw material testing methods., • Ability to work with and maintain data in a QC database and quality management system., • Attention to detail in labeling samples, recording test results, and validating specifications., • Ability to identify errors and inconsistencies in test data, sample information, and specifications and take corrective action., • Strong communication skills to clearly convey safety topics, quality issues, and corrective actions to team members., • Capability to lead and chair weekly safety meetings and promote safe work practices. Additional Skills & Qualifications • Familiarity with ISO 9001 quality standards and their application in a laboratory and production environment., • Ability to manage and update customer and product specifications within a quality management system., • Experience validating Certificates of Analysis (C of A) against established specifications., • Problem-solving skills to resolve raw material specification issues and support continuous improvement., • Ability to collaborate effectively with laboratory and production teams to ensure accurate testing and blending processes. Work Environment This is a 1st shift position with working hours from 6:00 a.m. to 2:30 p.m. The role is based in a laboratory and production support environment that emphasizes safety, GMP compliance, and adherence to ISO 9001 standards. Work involves routine chemical testing, wet chemistry procedures, and interaction with a QC database and quality management systems. The environment is structured and process-driven, with regular safety meetings and close collaboration between quality, lab, and production teams. If you are looking for 2nd or 3rd shift we do have openings there too! If interested and qualified please book a virtual meeting with me here: https://talentassistant.actalentservices.com/assistant/bookings/aOjUnKc_ Job Type & Location This is a Contract to Hire position based out of South Plainfield, NJ. Pay and Benefits The pay range for this position is $24.00 - $24.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in South Plainfield,NJ. Application Deadline This position is anticipated to close on Oct 13, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job Description Job Title: Chemical Technician 1st Shift Job Description The Chemical Technician 1st Shift plays a key role in ensuring product quality and laboratory safety by performing chemical testing, maintaining adherence to ISO 9001 standards, and supporting quality control processes across raw materials and finished products. This position actively participates in safety initiatives, manages product and customer specifications within the quality management system, and helps resolve quality and process issues between the laboratory and production. Responsibilities • Prepare safety topics and lead weekly safety meetings to promote a strong safety culture in the laboratory., • Ensure the quality of products and maintain strict adherence to ISO 9001 standards in all testing and documentation activities., • Perform chemical testing and cover any area of testing required in the lab when needed or requested., • Monitor sample status in the QC database and close and release product test results in a timely and accurate manner., • Identify personnel-related issues within the lab, communicate them appropriately, and recommend resolutions to leadership., • Identify, communicate, and retrain team members to address errors made by both the lab and production, such as missing labels on sample cups, incorrect product or customer information on sample labels, missing test results, or erroneous data., • Recommend and support corrective actions to prevent recurring errors in sampling, testing, and data recording processes., • Enter all new customer and product specifications into the quality management system and maintain accurate, up-to-date specifications., • Validate Certificates of Analysis (C of A) first released from the quality management system and ensure that correct specifications are in place., • Initiate specification requests when no existing specifications are available for a product or customer., • Monitor raw materials in quality inspection, perform necessary testing, and release materials in a timely manner., • Resolve raw material specification issues by coordinating with appropriate stakeholders and ensuring compliance with quality requirements., • Collaborate with production and other departments to support blending and related processes through accurate testing and specification management., • Maintain accurate records and documentation for all testing, inspections, and specification changes in accordance with GMP and quality procedures. Essential Skills • Experience working in a GMP (Good Manufacturing Practice) environment and following established quality and documentation procedures., • Hands-on experience with chemical testing in a laboratory setting., • Strong knowledge of wet chemistry techniques and raw material testing methods., • Ability to work with and maintain data in a QC database and quality management system., • Attention to detail in labeling samples, recording test results, and validating specifications., • Ability to identify errors and inconsistencies in test data, sample information, and specifications and take corrective action., • Strong communication skills to clearly convey safety topics, quality issues, and corrective actions to team members., • Capability to lead and chair weekly safety meetings and promote safe work practices. Additional Skills & Qualifications • Familiarity with ISO 9001 quality standards and their application in a laboratory and production environment., • Ability to manage and update customer and product specifications within a quality management system., • Experience validating Certificates of Analysis (C of A) against established specifications., • Problem-solving skills to resolve raw material specification issues and support continuous improvement., • Ability to collaborate effectively with laboratory and production teams to ensure accurate testing and blending processes. Work Environment This is a 1st shift position with working hours from 6:00 a.m. to 2:30 p.m. The role is based in a laboratory and production support environment that emphasizes safety, GMP compliance, and adherence to ISO 9001 standards. Work involves routine chemical testing, wet chemistry procedures, and interaction with a QC database and quality management systems. The environment is structured and process-driven, with regular safety meetings and close collaboration between quality, lab, and production teams. If you are looking for 2nd or 3rd shift we do have openings there too! If interested and qualified please book a virtual meeting with me here: https://talentassistant.actalentservices.com/assistant/bookings/aOjUnKc_ Job Type & Location This is a Contract to Hire position based out of South Plainfield, NJ. Pay and Benefits The pay range for this position is $24.00 - $24.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in South Plainfield,NJ. Application Deadline This position is anticipated to close on Oct 22, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job Details: Global Pharmaceutical Company Chemist/Jr Product Development Scientist (formulations, raw material characterization, rheology, usp testing, etc.) Onsite—5 days Location—Summit, NJ Pay $25-30/hr Description: Junior Product Development Scientist with hands-on experience supporting skincare product formulation development, laboratory testing, and scientific evaluation. Skilled in preparing and batching multiple formulation iterations, conducting stability studies, analyzing test results, and maintaining accurate technical documentation throughout the product development lifecycle. Demonstrates strong analytical thinking, attention to detail, and problem-solving abilities while ensuring technical accuracy and adherence to project timelines. Effective collaborator with the ability to work cross-functionally in fast-paced environments, supporting product innovation from concept through development. Recognized for strong organizational and time management skills, proactive communication, and a passion for continuous learning. Committed to developing high-quality, consumer-focused products that meet business objectives while contributing positively to team success and innovation initiatives. Key Strengths • Skincare formulation development, • Product batching and prototype preparation, • Stability testing and product evaluation, • Laboratory testing and data analysis, • Technical documentation and record keeping, • Cross-functional collaboration, • Problem solving and critical thinking, • Project and timeline management, • Strong communication skills, • Attention to detail and quality focus, • Innovation and continuous improvement BA/BS degree is required

Job Title: QA Automation Engineer Location: Berkeley Heights, NJ Job Summary: We are seeking a skilled QA Automation Engineer with strong experience in Playwright to design, develop, and maintain scalable automated test frameworks for web applications. The ideal candidate should have expertise in test automation, API testing, CI/CD integration, and modern software testing methodologies. Key Responsibilities • Design, develop, and execute automated test scripts using Playwright., • Build and maintain reusable automation frameworks for web applications., • Collaborate with developers, product owners, and QA team members to understand requirements and define test strategies., • Perform functional, regression, integration, and end-to-end testing., • Automate API testing using tools such as Playwright, Postman, or REST Assured., • Integrate automated test suites into CI/CD pipelines (Azure DevOps, GitHub Actions, Jenkins, etc.)., • Analyze test results, identify defects, and work with development teams to resolve issues., • Create and maintain test documentation, test cases, and automation reports., • Participate in Agile ceremonies including sprint planning, grooming, and retrospectives., • Ensure software quality standards and best practices are followed. Required Skills • 8+ years of experience in QA Automation Testing., • Strong hands-on experience with Playwright using TypeScript/JavaScript., • Experience in UI automation testing for web applications., • Knowledge of API testing and validation., • Understanding of SDLC, STLC, and Agile methodologies., • Experience with version control tools such as Git., • Familiarity with CI/CD tools (Jenkins, Azure DevOps, GitHub Actions)., • Strong debugging, troubleshooting, and analytical skills., • Experience working with defect tracking tools such as Jira. Preferred Skills • Experience with Playwright Test Runner., • Knowledge of Docker and containerized testing environments., • Performance testing exposure using JMeter or similar tools., • Experience with cloud platforms (Azure, AWS, GCP)., • Understanding of database testing and SQL queries.

Key Responsibilities: • Collaborate with business stakeholders, product owners, architects, and development teams to gather, analyze, and document business requirements., • Lead requirement elicitation workshops, interviews, process reviews, and stakeholder discussions., • Translate business needs into detailed functional requirements, user stories, business process flows, and acceptance criteria., • Create and maintain: --- Business Requirement Documents (BRD) --- Functional Requirement Specifications (FRS) --- User Stories and Epics --- Use Cases --- Process Flow Diagrams --- Data Mapping Documents • Analyze current-state and future-state business processes and recommend improvements., • Work closely with development and testing teams to ensure requirements are clearly understood and implemented., • Support backlog grooming, sprint planning, and Agile ceremonies., • Facilitate User Acceptance Testing (UAT), defect triage, and business sign-off activities., • Identify risks, dependencies, assumptions, and business impacts throughout the project lifecycle., • Coordinate with multiple business and technology teams across geographies., • Provide regular status updates and communicate project progress to program leadership., • Support change management, training, and deployment activities. Key Competencies: • Business Analysis, • Requirement Management, • Stakeholder Management, • Strategic Thinking, • Problem Solving, • Process Optimization, • Communication & Presentation Skills, • Risk and Dependency Management, • Cross-Functional Collaboration

Hi, Business analyst- card processing or card disputes exp. Location: Berkeley Heights, NJ and Alpharetta, GA (100% Onsite ) Experience: 10+ Years Key Responsibilities: • Collaborate with business stakeholders, product owners, architects, and development teams to gather, analyze, and document business requirements., • Lead requirement elicitation workshops, interviews, process reviews, and stakeholder discussions., • Translate business needs into detailed functional requirements, user stories, business process flows, and acceptance criteria., • Create and maintain: --- Business Requirement Documents (BRD) --- Functional Requirement Specifications (FRS) --- User Stories and Epics --- Use Cases --- Process Flow Diagrams --- Data Mapping Documents • Analyze current-state and future-state business processes and recommend improvements., • Work closely with development and testing teams to ensure requirements are clearly understood and implemented., • Support backlog grooming, sprint planning, and Agile ceremonies., • Facilitate User Acceptance Testing (UAT), defect triage, and business sign-off activities., • Identify risks, dependencies, assumptions, and business impacts throughout the project lifecycle., • Coordinate with multiple business and technology teams across geographies., • Provide regular status updates and communicate project progress to program leadership., • Support change management, training, and deployment activities. Key Competencies: • Business Analysis, • Requirement Management, • Stakeholder Management, • Strategic Thinking, • Problem Solving, • Process Optimization, • Communication & Presentation Skills, • Risk and Dependency Management, • Cross-Functional Collaboration

Role: Business analyst with card processing or card disputes exp Location: Berkeley Heights, NJ and Alpharetta, GA (100% Onsite ) Experience: 10+ Years Key Responsibilities: • Collaborate with business stakeholders, product owners, architects, and development teams to gather, analyze, and document business requirements., • Lead requirement elicitation workshops, interviews, process reviews, and stakeholder discussions., • Translate business needs into detailed functional requirements, user stories, business process flows, and acceptance criteria., • Create and maintain: --- Business Requirement Documents (BRD) --- Functional Requirement Specifications (FRS) --- User Stories and Epics --- Use Cases --- Process Flow Diagrams --- Data Mapping Documents • Analyze current-state and future-state business processes and recommend improvements., • Work closely with development and testing teams to ensure requirements are clearly understood and implemented., • Support backlog grooming, sprint planning, and Agile ceremonies., • Facilitate User Acceptance Testing (UAT), defect triage, and business sign-off activities., • Identify risks, dependencies, assumptions, and business impacts throughout the project lifecycle., • Coordinate with multiple business and technology teams across geographies., • Provide regular status updates and communicate project progress to program leadership., • Support change management, training, and deployment activities. Key Competencies: • Business Analysis, • Requirement Management, • Stakeholder Management, • Strategic Thinking, • Problem Solving, • Process Optimization, • Communication & Presentation Skills, • Risk and Dependency Management, • Cross-Functional Collaboration

About the Company Breckenridge Pharmaceutical develops and markets high-quality, added-value and cost-effective generic drugs in the United States. Our products are developed in the group’s own R&D facilities and through strategic partnerships with manufactures from around the world. About the Role This position reports to the Vice President, Quality Assurance and will manage or support: cGMP compliance assessment of contract manufacturers, the company SOP and Training systems, QA/QC Testing /Audit program, and Quality/Compliance decisions related to the Company’s ANDA products, as well as its products subject to OTC Monographs and FDA or other industry-accepted standards for Dietary Supplements, Medical Foods or Foods for special dietary use. Responsibilities • Perform, support and evaluate third party audits of current and proposed vendors for cGMP compliance, • Manage the SOP system, including writing/ revising and maintaining SOPs, SOP Tracking and SOP Training, • Support market distribution of batches, • Manage the review and resolve batch deviations / Out-of-Specification (OOS) reports and proposed Corrective and Preventative Actions (CAPAs) from manufacturers for Dietary Supplements and Medical Foods, • Manage product quality complaints, • Support FDA audits/inspections of the company or its manufacturing partners, as needed, • Product Quality Reviews, including review of manufacturers' reports of annual product reviews, • Manage change control review of Dietary Supplements and Medical Foods products, • Batch record reviews, as required Qualifications • Bachelor of Science required (preferably technical / science-biology, chemistry, pharmacy or other suitable science/technology), • Minimum 10 years’ experience in the pharmaceutical industry with focus in Quality Assurance / Quality Systems (preferably at least 5 years in a QA-management role), • Ability to travel domestically 3-4 times per year to perform audits on facilities, potential international travel Required Skills • Strong knowledge of quality and compliance for drug production, • Strong knowledge of cGMP regulations (21 CFR 210 and 211 and 21 CFR 110 and 111), • Strong leadership skills, • Excellent attention to detail and organizational skills, • Effective communication and interpersonal skills Pay range and compensation package At Breckenridge Pharmaceutical Inc, we’re committed to investing in every team member’s total well-being, now and in the future. Our benefits programs vary but we offer the following to all BPI team members, regardless of geographic location: • Flexible approach to how we work, • Health benefits and time-off programs, • Competitive compensation packages, • The anticipated annual salary for this role is $120,000 – 145,000 Equal Opportunity Statement Breckenridge Pharmaceutical, Inc is an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

*Onsite 5 days a week* Overview The Quality Engineer will apply engineering knowledge, problem solving skills and ingenuity to resolve quality issues for all Humanscale Products. They will also drive continuous improvement for product and process performance. Essential Functions Customer Focus and Continuous Improvement • Directly responsible for ensuring all quality standards for products are met prior to shipment to customer, • Investigates, conducts tests or experiments, gathers data, and performs preliminary analysis for product performance issues., • Conducts root cause investigation and is responsible for driving the implementation of corrective action and preventive measures, • Directly responsible for customer complaint reduction to assigned Humanscale Product line, • Initiates, leads and participates in continuous improvement projects Operations • Works with experienced QEs to disposition non-conforming material, • Oversees efforts and works with production, inventory control and inspection teams to quarantine/segregate parts when nonconformance is identified, • Directs workers engaged in measuring, testing products and tabulating data concerning test set up and procedure to follow, • When sort/rework of nonconforming material is required, provides technical support as required, • Participates in Lean activities including Kaizen events and 6S audits Quality Systems • Develops and initiates standards and methods for inspection, testing, and evaluation, utilizing knowledge in mechanical and electrical engineering fields, • Devises sampling procedures and develops forms and instructions for recording, evaluating, and reporting quality and reliability data, • Contributes to the compilation/updating of training material, SOP’s, and QC Criteria as required Qualifications • B.S. degree or equivalent in a mechanical or electrical engineering discipline, • 0-2 years of experience in Quality Engineering (in an ISO certified manufacturing environment preferred), • Ability to read and understand engineering drawings, • Solid communication skills with the ability to work effectively in cross-functional teams, • Excellent interpersonal skills to lead cross-functional teams and drive projects to successful closure., • Ability to demonstrate accuracy and strong attention to detail, • Ability to work well in a team environment Physical Requirements • Sitting 70% - Walking/Standing 30%, • Must be able to lift up to 50lbs, • Long periods of close work on computer screen, • Interpret, analyze, research and handle multiple tasks simultaneously, • Climate controlled office space, • Use of hands to operate tools, install, adjust and attach parts, • Understanding and working with machines & mechanical systems, • Knowledge and ability to use computers & related technology efficiently, • The worker is required to have visual acuity, which is essential for task that require attention to detail, such as operating machinery or performing quality control Benefits • Competitive salary, • Medical Benefits (Medical, Dental, Vision), • HSA, FSA, Commuter Benefits, • Medical Discounts, • Ancillary Benefits, • Accident, Critical Illness, Hospital Insurance, • Voluntary, Spouse, and Child Life Insurance, • Pet Insurance, • Employee Discount Programs, • 401k matching, • Paid time off (including 15 PTO days and 11 holidays) Company Overview Humanscale is the premier designer and manufacturer of ergonomic products that improve health and comfort at work. We have a focus on sustainability with over 70% of our products currently certified as having a Net Positive impact on the environment. impact on the environment. Our award-winning office products – seating, sit/stand desks, technology support and lighting – have led the industry in performance and simplicity for 40 years. Salary Range: $68,032-$99,232 Please note that the salary information is a general guideline. Humanscale considers other factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market location and business considerations when extending an offer. Humanscale is an Equal Opportunity Employer (Disabled/Veteran) Scam Notice: Please be aware that there are individuals and organizations that may attempt to scam job seekers by offering fraudulent employment opportunities in the name of Humanscale. These scams may involve fake job postings, unsolicited emails, or messages claiming to be from our recruiters or hiring managers. Humanscale will never ask for any personal account information, such credit card details or bank account numbers, during the recruitment process.

Overall Job Summary The Analytical Chemist supports analytical testing activities for raw materials, in-process samples, and finished products. This role is responsible for conducting laboratory analyses, operating analytical instrumentation, maintaining laboratory documentation, and supporting product development, quality, and supplier qualification initiatives. Job Responsibilities • Perform physical, chemical, and instrumental analyses on raw materials, in-process samples, and finished products using wet chemistry and analytical techniques., • Operate and assist with the calibration, maintenance, and troubleshooting of laboratory instrumentation, including FTIR, UV-Vis, SEM-EDS, XRF, pH meters, conductivity meters, density meters, and other analytical equipment., • Prepare samples, conduct testing, record observations, and accurately document results in laboratory systems and notebooks., • Assist with material characterization and testing activities to support product development, quality investigations, and supplier evaluations., • Oversee daily analytical laboratory operations, maintenance activities, and compliance with established laboratory procedures., • Act as a point of contact for R&D on chemical analysis and material evaluations., • Assist in managing analytical lab inventory including consumables, standards, and gases, • Follow and improve on Standard Operating Procedures for lab equipment and processes, • Support continuous improvement initiatives by identifying opportunities to enhance laboratory efficiency, testing capabilities, data quality, and process reliability. Education/Experience • Bachelor’s degree in chemistry, materials science, or related STEM field required, • 2+ years of analytical laboratory experience Skills/Abilities: • Working knowledge of analytical chemistry principles and laboratory practices., • Basic knowledge of analytical instrumentation, including SEM-EDS, XRD, FTIR, UV-Vis, TGA-DSC, and related laboratory equipment., • Knowledge of method development, validation, calibration, and troubleshooting techniques., • Understanding of quality systems, Good Laboratory Practices (GLP), ISO standards, and laboratory documentation requirements., • Knowledge of laboratory safety regulations, chemical handling procedures, and environmental health and safety requirements., • Basic experience with supplier qualification, quality investigations, and specification development. Travel • Overnight/North America Travel: Less than 10%, • Local Travel Working Conditions • Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 25 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body., • Factory - The worker may be subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, vibration, moving vehicles, electrical current, exposure to temperature changes or exposure to chemicals. While performing the duties of this job, the employee may be exposed to fumes, airborne particles, odors, dust, mists, and gases. The noise level in the work environment can be loud. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Machinery operation requires the use of safety equipment to include but not limited to eye safety glasses, hearing protectors, work boots, and lab coats. May be required to exert up to 50 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.

About Eos Energy Enterprises Eos Energy Enterprises, Inc. is accelerating the shift to American energy independence with positively ingenious solutions that transform how the world stores power. Our breakthrough Znyth™ aqueous zinc battery was designed to overcome the limitations of conventional lithium-ion technology. It is safe, scalable, efficient, sustainable, manufactured in the U.S., and the core of our innovative systems that today provides utility, industrial, and commercial customers with a proven, reliable energy storage alternative for 3 to 12-hour applications. Eos was founded in 2008 and is headquartered in Edison, New Jersey. For more information about Eos (NASDAQ: EOSE), visit _. The Sr. Electrical Engineer is accountable for advanced development and design of battery management system electronics and controls for newly built energy storage systems, as well as maintaining existing designs and support the creation of automated test equipment for the product components. This role demands deep expertise in low-level circuit design, high-voltage layout practices, and compliance with safety standards. The ideal candidate will serve as a technical authority across design, testing, documentation, and cross-functional support. Responsibilities • Architect and implement low-level electronic circuits incorporating electrical isolation, microcontroller control systems, and precision analog front-ends, • Design and optimize circuit board layouts for high-impedance analog signals, ensuring compliance with creepage and clearance requirements for high-voltage applications, • Develop designs that meet global safety certification standards (e.g., UL, IEC), including documentation and testing support for regulatory submissions, • Lead comprehensive verification testing of electronic components and integrated product designs, ensuring performance, reliability, and safety., • Generate detailed reports on design rationale, test methodologies, and results to support engineering reviews and product documentation., • Maintain thorough design records and contribute to the development of operation manuals and user documentation., • Provide expert-level troubleshooting and technical support for manufacturing teams and field operations on released products, • Offer strategic technical guidance to engineering teams, production staff, and service personnel, fostering best practices and continuous improvement. Knowledge, Skills, and Abilities • Proficient in designing and validating electrical circuit boards, including hands-on testing and performance evaluation., • Ability to work in lab environment and understand how components fit into a larger system, • Solid understanding of embedded control systems and their practical applications across various domains., • Strong programming capabilities in C and C++, with working knowledge of Linux-based development environments., • Demonstrated ability to diagnose issues and implement design improvements for enhanced reliability and performance., • Familiarity with design for EMC and availability to trace down EMI issues, • Knowledgeable in safety certification processes, including compliance with standards such as UL and IEC., • Competent skills with communications protocols such as TCP/IP, CAN, i²C and SPI; use of Modbus, • Capable of identifying, evaluating, and integrating off-the-shelf components and equipment into system designs., • Strong cross-discipline system skills, • Understanding of hardware and physical system being controlled is required, • Comfort and experience with the hazard and safety protocols of high voltage equipment and other aspects of working with large-scale battery systems, • Ability to self-direct to a goal and achieve independent success, • Ability to mentor junior engineers and technicians, • A team-player attitude and strong written/verbal communication skills are a must Education and Experience • Bachelor's degree in Electric Engineering, Electronic Engineering, Computer Engineering, or Electrical Engineering Technology required, • Minimum of 8 years' experience required Additional Experience • Hardware and design, debug, and testing. PCB design., • Minimum eight years’ experience designed electronics, developing automated controls, and troubleshooting, • Engineering Design Software: EAGLE, IAR or similar software, • Embedded programming, communication interfaces; I²C, RS-485, CAN bus communication, Modbus TCP, remote IO, or flex IO systems (Moxa, Allen Bradley, SEL, Advantech), PLC programming experience, GDB or other debugging tools., • Linux, embedded systems, • High voltage electrical systems Travel • Local Travel - Less than 10%, • Overnight/North America - Less than 10% Working Conditions • Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 25 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.

Software Architect role for the Testbed platform development: Act as a resident technical subject matter expert for the Testbed platform. Analyze the platform’s evolutionary needs and understand customer use cases, in active collaboration with the management team. Work with staff and volunteer steering committees and advisory committees to develop the long-term technical roadmap for the product. Conduct training or demonstrations with new and potential customers — either 1-on-1, or 1-to-many at industry events or online. Promote the platform at industry events as needed/requested. Participate in sales calls as needed to provide technical expertise. Create and manage user accounts of the Testbed platform; onboard, support and train new users. Break down business problems into value-added deliverable increments. Approve user stories, managing and prioritizing the technical teams’ backlog while maintaining the conceptual and technical integrity of the product/feature requirements. Participate in Agile ceremonies (sprint reviews and retrospectives) to plan incremental releases and define release objectives. Provide support for test automation and story acceptance criteria. Accept/Reject user stories in the release baseline. Oversee the process of software development, deployment of new elements and continuous integration of the Testbed platform. Summary / JD Client & Customer Engagement: Participate in client and customer meetings, conduct technical onboarding sessions, and resolve technical issues. Requirements & Roadmap Management: Gather and analyze requirements, create roadmaps for future development, and manage sprints, backlogs, and acceptance criteria for the design team. Testbed Platform Development & Integration: Identify tools for testbed integration, monitor open-source updates to upgrade the platform as needed, monitor 3GPP releases for new features and functionalities, and create testbeds in AWS for trials and subscribers. Note: Need to bring AI and Physical layer research (Massive MIMO, Beam forming, Ray tracing, channel optimizations etc.) capabilities to the Testbed as we need to align for 6G research and development. Optimization & Industry Engagement: Provide continuous improvements to the testbed platform, implement cost-optimization mechanisms in AWS, and participate in events. Required Skills Good understanding & work experience of cellular 5G RAN/Core network components & architecture for 5G — O-RAN experience is preferred. System integration & testing — Open-source tools like OAI RAN, OCU(D)U, Open5GS Linux & Bash scripting, Python AWS, Kubernetes & Docker REST APIs & Git

Hi, Hope you are doing well! Please find the job requirement below. If your experience aligns with the role and you are interested in exploring this opportunity, please share your updated resume. Role- Business Analyst Location: Berkeley Heights, NJ and Alpharetta, GA (Onsite) Experience: 10+ Years Key Responsibilities: card processing or card disputes exp. • Collaborate with business stakeholders, product owners, architects, and development teams to gather, analyze, and document business requirements., • Lead requirement elicitation workshops, interviews, process reviews, and stakeholder discussions., • Translate business needs into detailed functional requirements, user stories, business process flows, and acceptance criteria., • Create and maintain: --- Business Requirement Documents (BRD) --- Functional Requirement Specifications (FRS) --- User Stories and Epics --- Use Cases --- Process Flow Diagrams --- Data Mapping Documents • Analyze current-state and future-state business processes and recommend improvements., • Work closely with development and testing teams to ensure requirements are clearly understood and implemented., • Support backlog grooming, sprint planning, and Agile ceremonies., • Facilitate User Acceptance Testing (UAT), defect triage, and business sign-off activities., • Identify risks, dependencies, assumptions, and business impacts throughout the project lifecycle., • Coordinate with multiple business and technology teams across geographies., • Provide regular status updates and communicate project progress to program leadership., • Support change management, training, and deployment activities. Key Competencies: • Business Analysis, • Requirement Management, • Stakeholder Management, • Strategic Thinking, • Problem Solving, • Process Optimization, • Communication & Presentation Skills, • Risk and Dependency Management, • Cross-Functional Collaboration

Role: Pega Developer Location: Charlotte, NC Experience: 7 - 12 Years Job Description Pega Developer Must Have Technical/Functional Skills Primary Skill: Pega CLM Secondary: Pega / Pega Rules Process Commander PRPC, Jira Experience: 10+ years Roles & Responsibilities • Design, configure, and enhance Pega CLM solutions supporting client onboarding and lifecycle-management workflows., • Build and maintain Pega applications using Pega Platform / PegaRules Process Commander (PRPC), including case types, stages, processes, rules, data objects, user interfaces, and decision logic., • Translate business and functional requirements into clear Pega solution designs and reusable application components., • Configure CLM workflows, validations, integrations, exception handling, and operational controls in line with approved requirements., • Develop and support integrations with upstream and downstream systems using appropriate Pega integration patterns and services., • Perform unit testing, troubleshoot defects, analyze production issues, and implement maintainable fixes while following Pega guardrails and coding standards., • Participate in design reviews, code reviews, release planning, deployment support, and application documentation., • Work in an Agile delivery model by managing stories, tasks, defects, dependencies, and sprint commitments in Jira., • Collaborate with product owners, business analysts, architects, developers, testers, and support teams across locations., • Communicate progress, risks, dependencies, and technical decisions clearly to project stakeholders., • Follow applicable security, data-protection, change-management, and software-development lifecycle requirements.

We are seeking a skilled and detail-oriented Business Analyst to join our dynamic FinTech team. The ideal candidate will have a deep understanding of financial services and will work closely with cross-functional teams to translate business requirements into technical solutions, streamline processes, and contribute to the development of cutting-edge financial products. Key Qualifications: • Bachelor’s degree in business, Finance, Computer Science, or a related field., • 6+ years of experience as a Business Analyst, preferably in the FinTech, asset management, or financial services industry., • Knowledge and experience in Mutual Funds, Insurance, Loans, Wealth Management, or other financial products would be preferred., • Strong understanding of financial services and regulatory frameworks., • Proficiency in tools like Excel, SQL is an added advantage., • Familiarity with Agile methodologies and experience working in Scrum teams., • Experience with project management tools such as JIRA, Trello, or similar tools to manage workflows and track project progress., • Strong analytical, problem-solving, and communication skills., • Ability to collaborate effectively with both technical and non-technical teams., • Proficiency in wireframing and prototyping tools such as Balsamiq, Figma is a plus. Key Responsibilities: • Requirements Gathering: Collaborate with stakeholders, product managers, and developers to understand business needs related to financial services, translating them into functional and technical requirements., • Financial Systems Expertise: Provide insights and guidance on the structure and functioning of financial services, ensuring solutions comply with industry standards and regulatory frameworks., • Data Analysis: Conduct data analysis to identify trends, performance insights, and areas for improvement across a range of financial products and services., • Process Improvement: Identify inefficiencies in processes related to financial products, such as operations, investor reporting, or compliance workflows, and propose improvements., • Market Research: Stay updated on the latest FinTech trends and developments in financial services, ensuring that the company remains competitive and innovative., • Documentation: Develop detailed documentation, including use cases, user stories, process flows, and technical specifications, with a focus on financial products and systems., • Project Management Support: Utilize project management tools such as JIRA, Trello, Confluence, or other platforms to manage and track project progress, ensuring alignment with business goals., • Testing & Quality Assurance: Collaborate with development and QA teams to ensure products meet business needs through user acceptance testing (UAT) and ongoing feedback.

About the Company Our client, an industry leading manufacturer of precision metal and steel components, has an immediate need for an experienced Senior Project Engineer – Nuclear, to join their winning team in Springfield. About the Role Our candidate of choice will be accountable to plan, direct, manage and coordinate all engineering functions related to design, and development of fluid flow components specifically exposure to valve design in nuclear industry and modifications of existing product line for manufacturing and customer requirements. You will support design, production, planning, quality, delivery schedule and other company functions to enable successful production. Responsibilities • Review customer technical specification, Valve data sheet and select the valve model from existing valve data bank or design new valve. Is primary individual responsible for technical performance of product., • Review and comment on customer requested design changes if they have any., • Assist and advise the Chief Engineer regarding technical information pertaining to customer specifications on new orders., • Prepare detail component drawings, bill of material, test procedure, test report, OMM and perform other support functions in order to meet deadlines, commitments and manufacturing. Whenever possible, modify existing parts to speed process., • Prepare and release all the drawings and other documents required prior to formal release to production., • Produce operability calculations to ensure compliance with customer specifications/requests. This is accomplished by static analysis of the valve, keeping in mind force balance, considering pressure forces, spring forces, coil forces, and seismic forces., • Must have excellent analytical skills and be able prepare ASME code Design Report using Mathcad software., • Prepare and release commercial grade dedication (CGD) documents defining critical characteristics of valve components., • During the production stage, as required, provide support in such areas as MRR’s (material rejection report), repairs, assembly, and testing operations., • Perform liaison having to do with providing technical information to purchasing, production, and any other support departments on matters dealing with procurement of special material, specifications, available sources, subcontracting, and troubleshooting., • Support other engineers in groups, quality engineers, test engineers and production lab personnel on valve design so that they can become familiar with the design expectations and documentation of the unit., • Work within the team to ensure accurate and timely response to customer requirements., • Performs additional duties as needed., • Keep well informed on new developments in the engineering field through contact with educational institutions, professional societies, manufacturers and trade shows, perusal of texts, technical papers, journals, and periodicals. Qualifications • BSME with PE License., • Additional schooling – master’s degree in mechanical engineering is preferred. Required Skills • Valve design and electrical component training is a definite plus., • Five years’ design experience of fluid flow components including minimum three years of valve design in nuclear industry, with a demonstrated ability to design develop and prove new concepts and modification of existing products., • General knowledge of ASME Section III Codes, ASME/ASTM material for valves in Nuclear Industry and awareness with some military standards., • Familiar with ANSI B16.34, B31-1, and B31.3 valve design standards., • Strong understanding of geometric tolerance techniques based on ANSI Y14.5M., • Knowledge of CSA N285.0 Canadian standards., • Experience with commercial grade dedication (CGD), appendix-B, and part 21 for Nuclear Industry is required., • Basic knowledge of stress analysis and ASME code formula to prepare valve design reports., • Strong analytical skills and attention to detail are must., • Mathcad software would be a benefit., • Acquainted with EPICOR system., • Working knowledge of PC based CAD system (by choice – SOLIDWORKS). Preferred Skills • Valve design and electrical component training is a definite plus., • Mathcad software would be a benefit., • Acquainted with EPICOR system., • Working knowledge of PC based CAD system (by choice – SOLIDWORKS). Pay range and compensation package • Compensation: 120000.-150000. / Annually, • Benefit Offered: YES Equal Opportunity Statement Our client is committed to providing equal employment opportunities to all employees and applicants for employment and to creating an inclusive work environment that values diversity. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Title: Big Data Engineer Location: Basking Ridge, NJ (5-day onsite/week) Job Responsibilities: • Design and lead end-to-end data integration, • Perform performance tuning, diagnose, and resolve complex big data and streaming technical issues., • Design and implement scalable solutions across the technology stack, including data processing, database, web services, network, and security layers., • Perform integration testing and provide support to QA teams on large-scale projects., • Contribute to requirements analysis, project estimation, system design, coding, and testing., • Evaluate and implement appropriate third-party libraries and software to enhance product capabilities., • Stay current with emerging techniques and trends in big data and AI/ML. Job Requirement: • 5+ years of hands-on experience designing and implementing data applications in production using Java, Python, or Scala on big data platforms, with deep expertise in big data technologies and data optimization techniques., • 5+ years of hands-on experience with streaming technologies, specifically with a strong focus on Kafka, and various open-source software platforms (e.g., Apache ecosystem, Linux)., • Proven ability to optimize data flow and design efficient, scalable data pipelines, including data lakes and warehouses on containerized clusters., • Strong understanding of distributed data architecture concepts (e.g., caching, MapReduce, stream processing)., • Solid knowledge of data security, governance, and compliance., • Proficiency in programming languages: Java, Python, Scala, and SQL., • Strong analytical capabilities, creativity, and critical thinking skills., • Effective written and verbal communication, with the ability to facilitate team collaboration.

Job Description: Insight Global is looking for a Formulation Scientist to join the team Research and Development organization with one of our largest consumer healthcare companies. This individual will be responsible for batching, stability testing, and compliance documentation within electronic systems. They will be supporting an ongoing compliance initiative and will be focusing on laboratory activities including formulation and testing. The ideal candidate will have industry experience within the personal care or cosmetics industry in a laboratory environment. Paid Holidays and PTO included. **They will be utilizing equipment such as homogenizers, mixers, and scales. **Product Types: Washes, Lotions, Shampoos, Oils, Creams, and Powders. Must-haves -Bachelor's degree in Chemistry, Chemical Engineering, Biology, Pharmaceutical Sciences, or a related scientific field. -2+ years of experience in an R&D, formulation, product development, or laboratory environment. -Experience within consumer products, personal care, cosmetics, OTC, medical device, or pharmaceutical industries. -Experience with stability testing, emulsions, cleansers, creams, lotions, or topical products.

SUMMARY Spectrum Staffing Services is recruiting a QC Technologist for an opportunity supporting a quality control laboratory. This role tests raw materials and formulas, provides analytical support to Operations and R&D, investigates nonconforming results, and supports food safety activities. The ideal candidate brings hands-on GC and HPLC experience and can independently perform testing while maintaining accurate laboratory records. RESPONSIBILITIES • Perform QC testing of raw materials and formulas, including GC, HPLC and sensory testing., • Develop and improve analytical methods and maintain product testing procedures and lot data., • Perform laboratory equipment checks and calibrations, production equipment checks, and facility environmental monitoring swabbing., • Investigate out-of-specification results, deviations, material rejections and customer or vendor nonconformances; document findings for root cause and corrective action follow-up., • Create, review and revise QC SOPs while following GLP, GMP, food safety and laboratory safety requirements., • Sample incoming raw materials, organize product retains, maintain laboratory supplies, and support timely material dispositions., • Perform microbiological testing and report results as needed; provide training and guidance to technicians. QUALIFICATIONS • 3-5 years of experience in a quality control laboratory., • At least 3 years of hands-on experience with both GC and HPLC, plus method development experience., • PCQI certification and practical food safety experience., • Experience with equipment checks, environmental monitoring swabbing and sensory testing., • Strong understanding of laboratory equipment, accurate documentation, and problem solving., • Clear communication skills and proficiency with Word, Excel and Outlook. COMPENSATION: $73,000-$83,000

Manager, Customer Communications Operations This team runs customer communications for a $2.2B personal lines (Auto, Home and Umbrella) insurer on Salesforce Marketing Cloud — email, SMS, mobile, and cloud pages across acquisition, onboarding, service, renewal, and retention. The platform works, the volume is real, and the business depends on it. With a major platform migration behind us, we're shifting from stabilizing to building, and we're looking for a leader to bring the architecture, the data, the delivery process, and the roadmap together under a single owner. You'll join an established platform, an experienced team, and a business that pays attention to this work — with real latitude to decide how it moves forward. You'll lead a team that currently includes seven people — a technical lead, Marketing Cloud developers, QA, and creative — covering the full range of skills needed to take a program from idea to launch. Shaping what that team should look like going forward, and making the case for the resources it needs, is part of the job. This is a role where you get to write the playbook rather than inherit one. Why this role stands out: • You set the direction. The roadmap, the standards, the architecture, and how work gets delivered — yours to shape. The larger strategic calls are made in partnership with Enterprise Communications, and the stronger your work, the more of that vision you drive., • Lifecycle work at real scale. Acquisition, onboarding, service, renewal, retention, and win-back across email, SMS, mobile, and web — with the data and audience foundations underneath to make it personal. There's real room to improve here, and improvements show up quickly in customer experience and business results., • Compliance is part of the design. CAN-SPAM, TCPA, consent, and privacy shape the architecture, and you'll work directly with Legal and Security to get it right., • The big decisions are still open. Data Cloud, Agentforce, and Einstein are live evaluations. You'll help shape those calls and our Salesforce relationship., • You'll work across the Plymouth Rock companies. Partnership with business groups throughout the organization on projects that visibly move the business — and direct exposure to senior leadership, where you present your own architecture and roadmap., • There's real room to grow from here. Plymouth Rock runs deliberately flat, with fewer layers, wider scope at every level, and compensation set accordingly. People who do this job well are positioned for what comes next. What you'll own: The platform. Ownership of Salesforce Marketing Cloud — Journey Builder, Automation Studio, Contact Builder, Content Builder, CloudPages, Mobile Studio, Data Extensions. You'll set the standards for data architecture, naming, permissions, testing, documentation, and release management, and make sure the integrations connecting Marketing Cloud to Salesforce, our data warehouse, our website, our mobile app, and our analytics stack stay healthy. Your technical lead and developers build it; you decide what good looks like. The delivery process. Intake, prioritization, QA, and release governance for everything the team ships. You'll define how work enters the team, how it's estimated, how it's tested, and how it's communicated back — and you'll have the room to build that the way you think it should work. Lifecycle programs and audience strategy. Multichannel journeys across the customer lifecycle, and the segmentation and personalization strategy behind them. Controls for eligibility, suppression, consent, preferences, and frequency. Experimentation across content, offers, timing, and audiences. Working with our analytics partners on the data quality that makes any of it possible. The roadmap. You are the product owner. You'll define the vision, backlog, and delivery plan in partnership with Marketing, IT, Data, and business leadership, balance near-term asks against longer-term platform work, and set the success metrics we hold ourselves to. The team and its shape. You'll lead and develop a team that today includes a technical lead, Marketing Cloud developers, QA, and creative, across onshore and offshore capacity. You'll also have a real say in what it becomes — assessing the skills, structure, and sourcing model against where the roadmap is heading, and making the case for the resources to get there. What the first year looks like: We would consider this a strong first year: • You know the environment cold. A complete, documented inventory of journeys, automations, integrations, data extensions, and suppression logic, and a clear point of view on where to invest first., • Work enters and leaves the team predictably. A functioning intake and prioritization process, defined QA gates, published SLAs, and stakeholders who can see where their request stands without asking., • Capacity is a number, not an argument. A working capacity model that lets you say what the team can absorb, what it can't, and what it would take to change that — and a staffing recommendation grounded in it., • The programs perform better than you found them. Measurable improvement in engagement, conversion, or retention on the lifecycle programs you prioritize — and a stronger audience and consent foundation underneath them., • You've made a recommendation on where this function goes next. Target operating model, platform architecture direction, and a position on the AI and Data Cloud capabilities worth investing in. What you bring Required • 5+ years leading lifecycle or customer communications programs on an enterprise platform — Salesforce Marketing Cloud, Oracle Responsys, Marketo, Braze, or similar. Direct SFMC experience is an advantage; deep ownership of a comparable platform and the appetite to take on ours counts too., • Strong SQL and genuine comfort working with customer data — segmentation, behavioral triggers, audience construction. This is the technical skill that matters most in the role., • Enough platform fluency to lead technical people credibly. You won't be writing production code. You do need to read a solution design and judge whether it's sound, hear an estimate and know whether it's honest, and know when to trust a technical lead and when to press. Familiarity with AMPscript, SSJS, and APIs helps; the ability to direct people who have it is what's required., • Experience owning a lifecycle or marketing technology roadmap — not just executing against one., • Evidence of connecting communications work to business results — acquisition, conversion, retention, or customer value. You should be able to point to a program you shaped and the number it moved., • Track record of establishing operating discipline: intake, prioritization, QA, release management, documentation. We want specifics on something you built that outlasted you., • Experience leading people and assessing team capability, including making structural or staffing recommendations., • Working knowledge of consent, deliverability, and compliance — CAN-SPAM, TCPA, GDPR — as design constraints rather than afterthoughts., • The ability to explain architecture, dependencies, and tradeoffs to a senior executive who doesn't want the detail, and to a developer who needs all of it. This role requires both, often in the same day., • Bachelor's degree in a related field, or equivalent practical experience. Preferred • Marketing Cloud certifications., • Experience across more than one marketing automation platform., • B2C lifecycle marketing at high campaign volume., • Insurance, financial services, or another regulated industry., • Consent management, preference centers, deliverability, CAN-SPAM or TCPA experience., • Salesforce Data Cloud, Agentforce, or Einstein., • Data warehouse, CDP, or marketing data pipeline experience., • DevOps, source control, or deployment automation for Marketing Cloud., • Working with distributed or offshore development capacity. Perks and Benefits: • 4 weeks accrued paid time off + 9 paid national holidays per year, • Free onsite gym at our Boston Location, • Tuition Reimbursement, • Low cost and excellent coverage health insurance options that start on Day 1 (medical, dental, vision), • Robust health and wellness program and fitness reimbursements, • Auto and home insurance discounts, • Matching gift opportunities, • Annual 401(k) Employer Contribution (up to 7.5% of your base salary), • Various Paid Family leave options including Paid Parental Leave, • Resources to promote Professional Development (LinkedIn Learning and licensure assistance), • Convenient location directly across from South Station and Pre-Tax Commuter Benefits Salary Range: $155,000-$190,000 annual base salary + annual performance bonus. Actual compensation will vary based on multiple factors, including employee knowledge and experience, role scope, business needs, geographical location, and internal equity. About the Company The Plymouth Rock Company and its affiliated group of companies write and manage over $2.2 billion in personal and commercial auto and homeowner’s insurance throughout the Northeast and mid-Atlantic, where we have built an unparalleled reputation for service. We continuously invest in technology, our employees thrive in our empowering environment, and our customers are among the most loyal in the industry. The Plymouth Rock group of companies employs more than 2,000 people and is headquartered in Boston, Massachusetts. Plymouth Rock Assurance Corporation holds an A.M. Best rating of “A-/Excellent”. #LI-DNI

About Eos Energy Enterprises Eos Energy Enterprises, Inc. is accelerating the shift to American energy independence with positively ingenious solutions that transform how the world stores power. Our breakthrough Znyth™ aqueous zinc battery was designed to overcome the limitations of conventional lithium-ion technology. It is safe, scalable, efficient, sustainable, manufactured in the U.S., and the core of our innovative systems that today provides utility, industrial, and commercial customers with a proven, reliable energy storage alternative for 3 to 12-hour applications. Eos was founded in 2008 and is headquartered in Edison, New Jersey. For more information about Eos (NASDAQ: EOSE), visit _. Eos is at the forefront of developing advanced embedded solutions for energy storage and management. The Manager of Embedded Software Engineering will lead a team of talented engineers in designing, developing, and optimizing firmware for Battery Management Systems (BMS) tailored to the Eos battery technologies, ensuring safety, reliability, and compliance with industry standards such as UL 1998, UL 60730 Annex H, etc. The Manager of Embedded Software Engineering is responsible for overseeing the strategic direction, technical execution, and team performance in the development of embedded firmware for the Eos BMS. This role involves managing a team of engineers using the V-model of software design, driving safety-critical compliance with UL 60730 Annex H, and ensuring seamless integration of firmware with hardware components like STM32 microcontrollers, CAN/CANFD, RS-485 protocols, ADC-s, etc. Responsibilities • Lead Firmware Development for BMS: Oversee the design, documentation, development, and maintenance of embedded firmware for generations of Eos Battery Management Systems, ensuring adherence to the V-model and compliance with UL 60730 Annex H functional safety standards., • Team Management: Manage, mentor, and develop a team of embedded software engineers, setting performance goals, allocating resources, and fostering a collaborative, innovative environment., • Drive Safety and Compliance: Ensure the implementation of diagnostics, fail-safe mechanisms, and safety features (e.g., overvoltage/undervoltage protection, electrolyte monitoring) in BMS firmware, aligning with UL 60730 Annex H requirements., • Strategic Oversight of Communication Protocols: Guide the team in designing and implementing communication interfaces (e.g., CAN/CANFD, RS-485, I2C) for real-time data transmission and control of battery systems., • Collaborate on Hardware-Software Integration: Partner with electronics engineering leads to ensure robust integration of firmware with BMS hardware, including sensors, ADCs, and power electronics, while overseeing validation and performance testing., • Hardware-Software Integration: Collaborate with hardware engineers to ensure proper integration of firmware with BMS hardware components, including sensors, and power electronics, conducting safety validation and performance testing., • Process Improvement: Develop and refine embedded software engineering processes to enhance efficiency, reliability, and scalability of BMS development., • Documentation and Standards: Oversee the creation of comprehensive technical documentation (e.g., design specifications, test plans, compliance reports) and ensure traceability and quality per V-model methodologies., • Cross-Functional Collaboration: Work with other departments (e.g., product management, etc.) to align embedded software efforts with company goals and support troubleshooting tools and commissioning processes., • Roadmap Development: Contribute to the strategic planning of future BMS product features and enhancements, aligning with Eos’ clean energy mission., • Ensure a safe work environment by following health and safety guidelines and policies., • Root Cause Analysis: Lead investigations into firmware-related failures, implementing corrective actions to improve system reliability., • Champion a culture of continuous learning by staying updated on advancements in BMS design, microcontroller platforms, and safety standards., • Other duties, responsibilities and activities may change or be assigned at any time with or without notice. Knowledge, Skills, and Abilities • Leadership Expertise: Proven ability to lead and inspire a team of embedded software engineers, balancing technical guidance with managerial oversight., • Technical Proficiency: Strong background in C/C++ for embedded systems, real-time operating systems (RTOS), and microcontroller-based development (e.g., STM32 family)., • Safety Standards Knowledge: Deep understanding of IEC 60730 Annex H and its application to safety-critical embedded systems., • Communication Protocols: Expertise in CAN bus, CANFD, RS-485, SPI, I2C, and other protocols relevant to battery systems., • Problem-Solving: Exceptional ability to troubleshoot complex software and hardware integration issues and implement scalable solutions., • Project Management: Skilled in managing timelines, resources, and deliverables in a fast-paced engineering environment., • Collaboration: Excellent interpersonal and communication skills to work effectively with cross-functional teams and clearly articulate technical concepts., • Knowledge of embedded security practices (e.g., secure bootloaders, encryption). Education and Experience • Bachelor's degree in electrical engineering, computer engineering, or related field required., • Master's degree in electrical engineering, computer engineering, or related field preferred., • Minimum of 8 years' experience. Travel • Local Travel: Less than 10%, • Overnight/North America: Less than 10% Working Conditions • Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 25 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body., • Factory - The worker may be subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, vibration, moving vehicles, electrical current, exposure to temperature changes or exposure to chemicals. While performing the duties of this job, the employee may be exposed to fumes, airborne particles, odors, dust, mists, and gases. The noise level in the work environment can be loud. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Machinery operation requires the use of safety equipment to include but not limited to eye safety glasses, hearing protectors, work boots, and lab coats. May be required to exert up to 50 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body., • Customer/Partner Locations – Employee may visit customer or partner locations that may be comprised of office, manufacturing floor, laboratory environments and construction sites depending on the location and reason for visit.

Job Description With safety as the top priority, Prototype Technician IIs are accountable for delivering batteries that meet product and quality specifications. All prototype lab team members are responsible for producing the required number of cells and batteries for testing each day during the week. Team members are responsible for receiving, testing, analyzing, recording, and reporting results of the product and test. Team members work independently in different functional areas to meet the daily and weekly objectives and may be assigned to work in one or more of the following focuses: 1. Prep: • Visually inspect each part for defects and cleanliness., • Manually connect bolts, washers, and nuts., • Heat shrink wrap on bolts and tie rods., • Wash individual and pre-assembled components per supplied work instructions., • Prepare modifications to parts where needed (shaving, cutting, drilling). 1. Welding • Visually inspect each part for defects and cleanliness., • Use parallel welder to attach metal pieces to one another. 1. Conductive Plastic Terminal • Visually inspect each part for defects and cleanliness., • Cut and prepare plastic according to work instruction., • Assembly conductive plastic according to work instruction., • Mark materials for identification and quality control., • Run a hot press., • Prepare, load, monitor, and unload part to the hot press. 1. Assembly • Visually inspect each part for defects and cleanliness., • Align parts and connect according to work instructions., • Update traveller with cell/battery specs. 1. Quality Control • Visually inspect each part for defects and cleanliness., • Run tests to ensure battery is assembled correctly without leaks., • Update traveller with cell/battery specs. 1. Filling • Measure and mix chemicals to create electrolyte batch., • Measure and transfer electrolyte from batch to cells/batteries., • Visually inspect each cell/battery for defects and cleanliness., • Update traveller with cell/battery specs. 1. Measuring • Visually inspect each part for defects and cleanliness., • Run electrochemical tests and update traveller with details. 1. Field Projects • The prototype team may occasionally be asked to assist the Field Operations team with:, • Manual labor in renewable construction projects., • Connecting batteries, • Running tests to ensure battery is installed correctly without any damage Responsibilities • Help equipment operators and other skilled labor when necessary, • Abide by all company regulations, policies, work procedures and instruction, • Load or unload construction materials., • Knowledge and ability to operate all lab stations., • All Team Members are responsible for maintaining shop cleanliness and assisting in maintain material inventory., • Other duties, responsibilities and activities may change or be assigned at any time with or without notice. Knowledge, Skills, and Abilities • Strong knowledge of shop equipment (CNS’s routers, table saw, drill press, welders, and other hand tools) and work safety., • Ability to work independently with little to no supervision., • Good communication and organization skills, • Knowledge of inspection tools such as dial clippers, micrometers, profilometers and other shop related inspection tools., • Ability to collaborate with design team in order to refine existing design efforts., • Background in R&D environment a plus Education and Experience • High school diploma or equivalent required., • Associate's degree, trade school, or equivalent experience required. Travel • Local Travel, • Overnight/North America: Less than 10% Working Conditions • Factory - The worker may be subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, vibration, moving vehicles, electrical current, exposure to temperature changes or exposure to chemicals. While performing the duties of this job, the employee may be exposed to fumes, airborne particles, odors, dust, mists, and gases. The noise level in the work environment can be loud. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Machinery operation requires the use of safety equipment to include but not limited to eye safety glasses, hearing protectors, work boots, and lab coats. May be required to exert up to 50 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body, • Customer/Partner Locations – Employee may visit customer or partner locations that may be comprised of office, manufacturing floor, laboratory environments and construction sites depending on the location and reason for visit.

Overview The Site Quality Manager is responsible for leading the quality function at their site and developing, implementing, and continuously improving Humanscale’s product and delivery quality which exceeds customer expectations, satisfies regulatory requirements, improves operational efficiency, and reduces the cost of poor quality. Essential Functions Customer Focus and Continuous Improvement • Promote a quality culture and customer focus approach, • Capture the Voice of the Customer through customer feedback to enable development and value chain to improve design and execution, • Drive timely and effective resolution of customer issues Leadership • Lead the Quality Assurance, Quality Control, and Quality Testing functions within the site, • Supervise workers engaged in the inspection and testing of activities to ensure efficient productivity and high technical integrity, • Manage the performance of the team through key performance metrics. Develop team to continuously improve performance and results, • Design, develop, and implement quality control training programs, • Conduct or arrange periodic training sessions to keep team members informed on proper procedures and methods Operations • Establish and deploy site Quality objectives in line with Global Quality objectives, • Coordinate and participate in Material Review Board (MRB) meetings, • Lead and participate in root cause analysis, • Drive effective corrective actions to prevent recurrence of non-conformances utilizing A3/SPS, 8D, and similar tools, • Execute cost of poor quality reduction measures to drive company savings, • Ensure compliance with customer, industry, and regulatory requirements, • Improve and error-proof business processes utilizing SS / Lean methodologies, • Develop, implement, and maintain quality specifications and standards for all raw materials, components, and finished goods, • Create, document, and implement inspection criteria and procedures Quality System • Lead site Quality Performance Reviews, • Lead internal audits and drive timely closure of findings, • Apply total quality management tools and approaches to analytical and reporting processes Qualifications • Bachelor’s degree from an Engineering discipline (Mechanical preferred), • Minimum of 3-5 years of experience in Quality Control in a manufacturing environment, • Minimum of 2 years of management experience, • Knowledge of Quality Management Systems, especially ISO 9000, • Knowledge of ERP systems, especially Oracle and Infor, is highly desirable, • Lean Manufacturing experience a plus, • Experience with developing/documenting procedures, • Excellent interpersonal skills to lead the quality function to a higher level of performance, • Demonstrated customer focus, with drive and determination to improve quality performance, • Able to direct and lead others to produce desired results, • Demonstrated analytical skills, combining multiple data sources to create quality insights that drive improvement, • Strong attention to detail; ability to thrive in a team environment, • Ability to exercise initiative, achievement, and independent judgment Benefits • Competitive base, • Medical Benefits (Medical, Dental, Vision), • HSA, FSA, Commuter Benefits, • Medical Discounts, • Ancillary Benefits, • Accident, Critical Illness, Hospital Insurance, • Voluntary, Spouse, and Child Life Insurance, • Pet Insurance, • Employee Discount Programs, • 401k matching, • Paid time off (including 15 PTO days and 11 holidays) Company Overview Humanscale is the premier designer and manufacturer of ergonomic products that improve health and comfort at work. We have a focus on sustainability with 70% of our products currently certified as having a Net Positive impact on the environment. Our award-winning office products – seating, sit/stand desks, technology support, and lighting – have led the industry in performance and simplicity for over 40 years. Salary Range: $86,829 - $126, 649 Please note that the salary information is a general guideline. Humanscale considers other factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market location and business considerations when extending an offer. Humanscale is an Equal Opportunity Employer (Disabled/Veteran) Scam Notice: Please be aware that there are individuals and organizations that may attempt to scam job seekers by offering fraudulent employment opportunities in the name of Humanscale. These scams may involve fake job postings, unsolicited emails, or messages claiming to be from our recruiters or hiring managers. Humanscale will never ask for any personal account information, such credit card details or bank account numbers, during the recruitment process.

About LifeStation LifeStation is a mission-driven healthcare technology company providing personal safety and remote monitoring solutions for older adults. Founded in 2004 and headquartered in Union, New Jersey, LifeStation remains privately held and focused on transforming the lives of the rapidly growing senior population in the U.S. through personal emergency response systems (PERS) and other technology-enabled health services. Its in-home, mobile, and smartwatch-enabled solutions promote safety and independence for older adults while delivering actionable insights to caregivers and care teams to support continuity of care. LifeStation is now one of the largest providers of medical alert monitoring and technology services in the U.S., serving nearly one million older adults and their families with dependable, compassionate support. The opportunity LifeStation is hiring a Principal Product Manager to own the digital experiences used by our members and their caregivers, with primary responsibility for our mobile apps and web applications. This is a hands-on role for a product leader who knows how to create and launch consumer mobile products, learn from real user behavior, and turn that learning into sustained adoption and engagement. You will set product direction, lead discovery, translate customer and business needs into clear priorities, develop feature and functionality requirements and partner closely with design, software engineering, operations, marketing, customer service, and external development partners. The role reports to the Vice President of Product and Technology and is a hybrid position based in LifeStation’s Union, New Jersey office. Employees in this role are expected to work in the office at least three days per week What you will own • Own the product strategy, roadmap, and backlog for LifeStation's member and caregiver mobile and web experiences., • Lead the full product lifecycle from customer discovery and concept definition through development, launch, measurement, and continuous improvement., • Define clear outcomes and success metrics across activation, onboarding, feature adoption, engagement, retention, customer satisfaction, and support demand., • Build a strong understanding of older adults, caregivers, and families through interviews, usability testing, surveys, behavioral data, and customer-care feedback., • Monitor the competitive landscape and emerging practices in consumer health, aging, caregiving, and connected safety products., • Write clear product requirements, user stories, acceptance criteria, and release plans that give design and software engineering teams the context needed to solve problems well., • Collaborate with software engineering and quality assurance on testing, release readiness, and App Store and Google Play launches., • Use analytics and qualitative research to evaluate product performance, prioritize improvements, and communicate what is working and what needs to change., • Coordinate go-to-market and adoption efforts with marketing, sales, operations, fulfillment and customer service teams. What success looks like • Customers and caregivers can understand and complete key journeys with minimal friction or assistance., • New capabilities launch with clear goals, instrumentation, rollout plans, and measurable results., • Mobile and web usage grows because the product delivers real value to our customers, • Cross-functional partners understand the roadmap, the rationale behind priorities, and the outcomes the team is working toward. What you bring • 10+ years of hands-on product management experience, including a track record of launching mobile products or major features and improving adoption, engagement, or retention after launch., • Strong product judgment and the ability to balance customer value, business priorities, technical constraints, and speed., • Excellent written and verbal communication skills, including the ability to turn ambiguity into clear decisions and align technical and nontechnical stakeholders., • Technical fluency to discuss APIs, integrations, data flows, mobile release processes, and implementation tradeoffs without needing to be an engineer., • A practical, curious, and collaborative working style with a willingness to move between strategy and execution. Helpful experience • Experience developing customer-facing software experiences that interact with connected devices, wearables, IoT products, or other physical hardware., • Experience working with WordPress-powered websites, including content management, user experience, integrations, and collaboration with developers or external agencies., • Working with external product development partners or distributed engineering teams. Why join LifeStation • Competitive salary and comprehensive benefits package, • Entrepreneurial work environment with the freedom to get things done, • Chance to grow by working with an extremely talented team, • Make a true impact on our company and its services with high-visibility and possibilities for career growth, • Company outings, catered lunches, team building events and much more, • Excellent location close to highways, • Benefits and Perks, • Excellent Comprehensive Insurance Coverage, • 401(k) Retirement Savings Plan & Employer Match, • Gym/Fitness Program Reimbursement, • Access to Corporate Discounts, • Company Paid Life Insurance, • And much more… Compensation The anticipated base salary range for this position is $165,000 to $205,000, depending on experience, skills, and other job-related factors. This position is bonus eligible. We are committed to a diverse and inclusive workforce, one that reflects the varied communities we serve. The services we offer and the products we build greatly benefit from a range of perspectives, which can only come from diversity of all types at all levels of the organization. Achieving true diversity and inclusion is the right thing to do and is also the smart thing for our business. We strongly encourage women, veterans, people with disabilities, people of color and gender nonconforming candidates to apply. We are an Equal Opportunity Employer and does not discriminate on the basis of an individual's sex, age, race, color, creed, national origin, alienage, religion, marital status, pregnancy, sexual orientation, gender identity and expression, disability, genetic trait or predisposition, carrier status, citizenship, veteran or military status and other personal characteristics protected by law. All applications will receive consideration for employment without regard to legally protected characteristics.

About Wakefern Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under the ShopRite, Price Rite Marketplace, The Fresh Grocer, Dearborn Market, Gourmet Garage, Fairway Market, and Morton Williams banners in New Jersey, New York, Connecticut, Pennsylvania, Maryland, Delaware, Massachusetts, New Hampshire and Rhode Island. Employing an innovative approach to wholesale business services, Wakefern focuses on helping the independent retailer compete in a big business world. Providing the tools entrepreneurs need to stay a step ahead of the competition, Wakefern’s co-operative members benefit from the company’s extensive portfolio of services, including innovative technology, private label development, and best-in-class procurement practices. Role Overview: We are seeking a hands-on application engineer with experience in warehouse management and supply chain systems. This role will translate operational business problems into reliable, scalable applications and integrations using Node.js, Java, Python, and related technologies. The engineer will independently lead work from discovery and solution design through development, testing, deployment, support, and continuous improvement. Applied AI will be a significant part of the role, including evaluating use cases, building AI-enabled capabilities, automating workflows, and validating outputs for operational use. Key Responsibilities: • Partner with warehouse, distribution, and supply chain teams to understand operational challenges and translate them into technical requirements and solution designs., • Design, develop, test, deploy, and support applications, services, APIs, integrations, and automation using Node.js, Java, Python, SQL, and appropriate cloud technologies., • Own technical solutions through the full software development lifecycle, including architecture, coding, code review, testing, release readiness, documentation, monitoring, and production support., • Build and enhance integrations among WMS, ERP, order management, transportation, inventory, automation, and other supply chain platforms., • Identify manual steps, bottlenecks, recurring defects, and performance constraints; implement solutions that improve throughput, accuracy, reliability, and maintainability., • Evaluate and apply AI capabilities to practical business problems, such as exception analysis, operational decision support, workflow automation, knowledge retrieval, and developer productivity., • Establish appropriate controls for AI-enabled solutions, including data quality, output validation, security, privacy, traceability, and human review., • Troubleshoot complex production issues across applications, interfaces, databases, and operational workflows; perform root-cause analysis and implement durable fixes., • Collaborate with engineering, product, infrastructure, security, vendors, and business stakeholders while remaining comfortable driving assignments independently., • Create clear technical documentation, including architecture decisions, interface specifications, support procedures, test evidence, and implementation plans. Required Qualifications: • 8+ years of experience designing, developing, implementing, or supporting business-critical applications in warehouse, distribution, logistics, inventory, or broader supply chain environments., • Hands-on software development experience with at least two of the following: Node.js/JavaScript or TypeScript, Java, and Python., • Strong SQL and relational database skills, including data analysis, query optimization, data modeling, and production troubleshooting., • Experience designing or consuming REST APIs, event-driven interfaces, file-based integrations, and batch or real-time processing patterns., • Working knowledge of WMS processes such as receiving, putaway, replenishment, inventory control, picking, packing, shipping, labor, and exception management., • Practical understanding of AI concepts and tools, including generative AI, prompt design, retrieval-based solutions, model limitations, output evaluation, and responsible use., • Demonstrated ability to decompose ambiguous business problems, evaluate alternatives, make sound technical decisions, and deliver maintainable solutions with limited oversight., • Strong analytical, debugging, and root-cause analysis skills across application, integration, and data layers., • Self-starter who takes ownership, learns unfamiliar technologies and business processes quickly, communicates clearly, and collaborates effectively across technical and operational teams. Preferred Qualifications: • Experience with DB2 or other enterprise database platforms used in high-volume operational environments., • Experience modernizing legacy applications or integrating technologies such as JCL, flat files, copybooks, COBOL, SUPRA, or mainframe workflows., • Experience with cloud platforms, containerized services, CI/CD pipelines, automated testing, observability, or DevOps practices., • Hands-on experience building AI-enabled applications, retrieval-based solutions, intelligent automation, or operational decision-support tools., • Experience integrating WMS with ERP, order management, transportation, inventory, material-handling automation, or other supply chain platforms. Wakefern is proud to offer a comprehensive benefits package designed to support the health, well-being, and professional development of our Associates. Benefits include medical, dental, and vision coverage, life and disability insurance, a 401(k) retirement plan with company match & annual company contribution, paid time off, holidays, and parental leave. Associates also enjoy access to wellness and family support programs, fitness reimbursement, educational and training opportunities through our corporate university, and a collaborative, team-oriented work environment. Many of these benefits are fully or partially funded by the company, with some subject to eligibility requirements.

Justin Alexander is looking for an Email & Digital Communications Manager to lead digital comms across email and partner with our Digital Product & Engineering team to support our websites, driving engagement across both our B2B wholesale and direct-to-consumer channels. This role plays a critical part in delivering thoughtful, timely, and impactful communications that strengthen relationships with our retailer partners while elevating the customer experience for brides. As part of our Marketing team, you'll own the planning, execution, and optimization of email communications while supporting website content and digital campaigns that align with our brand and business objectives. You'll collaborate cross-functionally with teams across Marketing, Digital Product & Engineering, Sales, Customer Experience, and Creative to ensure every touchpoint is cohesive, effective, and delivers measurable results. Reporting to the Director of Digital Marketing & Partnerships, you'll work closely with our Strategy Lead, Social Media & Content team, and other key stakeholders to execute integrated campaigns that support our global brands. This position is based at our Springfield, NJ headquarters on a hybrid schedule, with four days per week in the office. What You'll Do Communications • Lead digital storytelling across email and web, developing consumer-facing and retailer-facing communications that are on-brand, timely, and aligned to key brand moments and company objectives, • Align B2B email and communications execution with the broader B2B comms strategy set by the Strategy Lead, • Partner with Sales and Customer Service teams to craft and share relevant updates in a timely manner, • Partner with Global leads (EU and UK), to align on programming, ensuring a cohesive global output with regional nuances Email • Create and own email channel strategy for B2B and D2C audiences in partnership with the Director, executing against business and brand goals across retailer announcements, launches, incentives, campaign activations, and seasonal initiatives, • Own the end-to-end execution of email campaigns, from concept through send, including asset coordination, QA, and scheduling, • Develop messaging and evolve formats for email that optimize engagement and drive incremental activity, • Own market and launch communications timelines, ensuring retailers receive timely updates on collections, order deadlines, styles at risk, discontinuations, and ship windows with enough lead time to act, • Collaborate with graphic design to optimize the look and feel of emails, elevating visual quality and evolving layouts into more effective designs, • Partner with Digital Product & Engineering and Sales to align the email calendar with business needs, launches, and key promotional moments, • Audit and evolve existing automated flows and build new, complex journeys based on customer behavior, • Take a data-led approach through Salesforce to identify new opportunities for storytelling, cross-selling, automation, dynamic content, and personalization, • Manage audience segmentation and list health by region, improving triggers, audience definitions and deliverability, • Own reporting across the email channel, tracking open rate, click through/click-to-open, revenue/orders influenced, portal activity, and unsubscribe rate, translating insights into recommendations for ongoing strategy, • Partner with the Director and EU leads to set benchmarks and performance targets, while managing a testing roadmap, • Partner with the Social Media & Content team to feature relevant content, including ongoing influencer spotlights, • Lead briefings for designers and the Social Media & Content team, translating campaign goals into clear creative and content direction, • Stay organized with Monday.com to ensure cross-functional operational excellence Web • Support website optimization initiatives in partnership with the Digital Product & Engineering team, contributing content and copy that improves the consumer journey across key touchpoints, • Partner with Digital Product & Engineering and Product Teams to develop copy and content that ensures best sellers, new arrivals, and key launches are strategically surfaced and positioned across the website, aligning messaging with merchandising priorities and the broader marketing calendar during key seasonal moments, • Contribute web copy that supports SEO best practices, ensuring content is optimized for discoverability and organic growth What You'll Bring • 4-5 years of experience in B2B email marketing, with hands-on ownership of both writing and execution, • Background in the bridal industry a plus. You understand the retail landscape, the wholesale audience, and the seasonal rhythms of the business, • Proficiency in HubSpot, including campaign management, workflows, and reporting, • Experience building and optimizing automated email journeys, from simple triggers to multi-step behavioral flows, • Experience working within Salesforce, • Comfortable analyzing email performance data and using it to shape content and segmentation decisions, with familiarity in basic testing frameworks, • Ability to think creatively, strategically and technically, • Strong organizational skills and attention to detail. You manage multiple sends without things falling through the cracks, • Clear communicator who can work cross-functionally and translate strategy into execution, • Comfortable in a fast-paced environment where priorities shift and timelines are tight Compensation & Benefits This role has an anticipated base salary range of $80,000 to $95,000 annually. The final offer will be determined based on experience, skills, and internal benchmarks. Justin Alexander offers a comprehensive benefits package that includes: • Health, dental, and vision insurance with ancillary options, • 401(k) with company match, • Paid time off (vacation, sick days, holidays), • Family Building Benefits, • Tuition Reimbursement, • Employee discounts and more

Want to help shape how enterprises transform the way they work? At ANB Technologies, we're building something exciting. We're expanding our Atlassian and AI consulting practice and looking for a passionate, technically strong Solutions Architect who loves solving complex problems, working with customers, and turning innovative ideas into real-world solutions. If you enjoy combining deep technical expertise with creativity, customer interaction, and hands-on solution development, this is an opportunity to make a real impact. About ANB Technologies ANB Technologies is an Atlassian, OpenAI, and Anthropic partner helping enterprises modernize IT operations, streamline business processes, and accelerate digital transformation through Atlassian solutions, intelligent automation, and enterprise AI. As we expand our Atlassian and AI consulting practices in the United States, we are looking for a talented, hands-on Atlassian Solutions Architect who combines deep technical expertise, excellent communication skills, and a passion for solving customer problems. About the Role We are looking for a technically strong, customer-facing Atlassian professional who can understand business challenges, design effective solutions, deliver engaging product demonstrations, and lead successful implementations. The ideal candidate enjoys both solving business problems and building technical solutions, taking ownership from initial customer discussions through implementation and rollout. This is an exciting opportunity to work directly with enterprise customers, collaborate with sales and technical teams, and play a key role in building and expanding ANB Technologies' Atlassian practice. Key Responsibilities • Work directly with customers to understand business challenges, gather requirements, and translate them into practical technical solutions., • Design, configure, customize, and implement solutions using Jira, Jira Service Management (JSM), Confluence, and Rovo., • Deliver engaging product demonstrations, technical presentations, and proof-of-concepts tailored to customer business needs., • Support technical discussions, solution proposals, and architecture recommendations., • Lead technical implementations from solution design and development through testing, deployment, and customer rollout., • Configure Jira/JSM workflows, automation, service portals, SLAs, dashboards, permissions, and ITSM processes., • Develop integrations and custom solutions using REST APIs, scripting, and Atlassian development tools., • Collaborate with customers, sales teams, and delivery resources to ensure successful project outcomes., • Contribute to the growth of ANB's Atlassian practice through reusable solutions, demonstrations, and technical best practices. Required Qualifications • 5+ years of hands-on experience and strong technical expertise in Jira, Jira Service Management (JSM), and Confluence, including configuration, customization, and implementation., • Ability to understand customer business requirements and translate them into technical solutions., • Experience working directly with customers, conducting technical discussions, and presenting or demonstrating solutions., • Strong understanding of Jira workflows, automation, permissions, and ITSM processes., • Experience with REST APIs, integrations, scripting, or custom development., • Excellent communication, analytical thinking, and problem-solving skills., • Ability to independently manage technical responsibilities and take ownership of customer deliverables., • Hybrid Role: 3 days onsite in Iselin, NJ | 2 days remote Why Join ANB Technologies? This is an opportunity to help build and shape a growing technology consulting practice. You'll have the opportunity to: • Make a real impact: Work directly with enterprise customers to solve meaningful business and technology challenges., • Own your solutions: Take ideas from customer conversations to working solutions that deliver measurable results., • Work with emerging technologies: Explore the intersection of Atlassian, AI, Rovo, Anthropic, Open AI and intelligent enterprise automation., • Grow your career: Gain exposure to enterprise architecture, customer consulting, innovative projects, and future technical leadership opportunities. If you love technology, enjoy solving complex problems, and want to make a real impact, join ANB Technologies and help shape the future of enterprise automation and AI-powered solutions. Apply today!

We are At Synechron, we believe in the power of digital to transform businesses for the better. Our global consulting firm combines creativity and innovative technology to deliver industry-leading digital solutions. Synechron’s progressive technologies and optimization strategies span end-to-end Artificial Intelligence, Consulting, Digital, Cloud & DevOps, Data, and Software Engineering, servicing an array of noteworthy financial services and technology firms. Through research and development initiatives in our FinLabs we develop solutions for modernization, from Artificial Intelligence and Blockchain to Data Science models, Digital Underwriting, mobile-first applications and more. Over the last 20+ years, our company has been honored with multiple employer awards, recognizing our commitment to our talented teams. With top clients to boast about, Synechron has a global workforce of 17,000+, and has 58 offices in 22 countries within key global markets. Our Challenge: We are seeking an experienced FDE Engineer to design, build, deploy, and support enterprise-grade solutions using Microsoft Dynamics 365, Power Platform, Azure, Microsoft Fabric, and modern AI technologies. The successful candidate will work closely with product owners, enterprise architects, business analysts, developers, data engineers, and business stakeholders to translate complex business requirements into scalable, secure, and maintainable technical solutions. This role combines solution architecture, hands-on engineering, integration development, data and analytics engineering, and AI-enabled application delivery. The ideal candidate is comfortable working across the full solution lifecycle—from discovery and technical design through development, deployment, adoption, optimization, and production support. Additional Information* The base salary for this position will vary based on geography and other factors. In accordance with law, the base salary for this role if filled within Piscataway, NJ is $125-$135K/year & benefits (see below). Responsibilities: • Design and deliver scalable enterprise solutions using Dynamics 365, Power Platform, Azure, and Microsoft technologies., • Configure, customize, and integrate Dynamics 365, Dataverse, Power Apps, Power Automate, and Power Pages., • Build AI-enabled solutions using Azure AI Services, Azure OpenAI, Copilot Studio, and generative AI patterns., • Develop data and analytics solutions using Microsoft Fabric, Data Factory, Lakehouse, OneLake, pipelines, semantic models, and Power BI., • Design secure, maintainable architectures integrating Dynamics 365 with enterprise applications and data platforms., • Develop APIs, workflows, integrations, data models, and automation solutions., • Collaborate with product owners, architects, analysts, developers, and business stakeholders to translate requirements into technical solutions., • Lead technical design, development, testing, deployment, troubleshooting, and production support., • Apply best practices for security, governance, performance, scalability, and lifecycle management., • Document solutions and contribute to code reviews, technical standards, mentoring, and continuous improvement. Requirements: • 8–10 years of experience designing and delivering enterprise solutions using Microsoft Dynamics 365, Power Platform, Azure, and the broader Microsoft technology stack., • Strong expertise in Dynamics 365 configuration, customization, integrations, Dataverse, Power Apps, Power Automate, and Power Pages., • Hands-on experience building AI-enabled solutions using Azure AI Services, Azure OpenAI, Copilot Studio, and generative AI patterns., • Proficiency with Microsoft Fabric, including Data Factory, Lakehouse, OneLake, data pipelines, semantic models, and Power BI., • Design scalable, secure, and maintainable architectures integrating Dynamics 365 with enterprise applications and data platforms., • Collaborate with product owners, architects, analysts, and business stakeholders to translate requirements into reliable technical solutions. We offer: • A highly competitive compensation and benefits package., • A multinational organization with 58 offices in 22 countries and the possibility to work abroad., • 10 days of paid annual leave (plus sick leave and national holidays)., • Maternity & paternity leave plans., • A comprehensive insurance plan including medical, dental, vision, life insurance, and long-/short-term disability (plans vary by region)., • Retirement savings plans., • A higher education certification policy., • Commuter benefits (varies by region)., • Extensive training opportunities, focused on skills, substantive knowledge, and personal development., • On-demand Udemy for Business for all Synechron employees with free access to more than 5000 curated courses., • Coaching opportunities with experienced colleagues from our Financial Innovation Labs (FinLabs) and Center of Excellences (CoE) groups., • Cutting edge projects at the world’s leading tier-one banks, financial institutions and insurance firms., • A flat and approachable organization., • A truly diverse, fun-loving, and global work culture. SYNECHRON’S DIVERSITY & INCLUSION STATEMENT Diversity & Inclusion are fundamental to our culture, and Synechron is proud to be an equal opportunity workplace and is an affirmative action employer. Our Diversity, Equity, and Inclusion (DEI) initiative ‘Same Difference’ is committed to fostering an inclusive culture – promoting equality, diversity and an environment that is respectful to all. We strongly believe that a diverse workforce helps build stronger, successful businesses as a global company. We encourage applicants from across diverse backgrounds, race, ethnicities, religion, age, marital status, gender, sexual orientations, or disabilities to apply. We empower our global workforce by offering flexible workplace arrangements, mentoring, internal mobility, learning and development programs, and more. All employment decisions at Synechron are based on business needs, job requirements and individual qualifications, without regard to the applicant’s gender, gender identity, sexual orientation, race, ethnicity, disabled or veteran status, or any other characteristic protected by law.

Job title: Product Development Scientist Location: Summit NJ 07901 Duration: 10/05/2026 to 10/07/2027 Description: • Product Development Scientist with hands-on experience supporting skincare product formulation development, laboratory testing, and scientific evaluation., • Skilled in preparing and batching multiple formulation iterations, conducting stability studies, analyzing test results, and maintaining accurate technical documentation throughout the product development lifecycle., • Demonstrates strong analytical thinking, attention to detail, and problem-solving abilities while ensuring technical accuracy and adherence to project timelines., • Effective collaborator with the ability to work cross-functionally in fast-paced environments, supporting product innovation from concept through development., • Recognized for strong organizational and time management skills, proactive communication, and a passion for continuous learning., • Committed to developing high-quality, consumer-focused products that meet business objectives while contributing positively to team success and innovation initiatives. Key Strengths: • Skincare formulation development, • Product batching and prototype preparation, • Stability testing and product evaluation, • Laboratory testing and data analysis, • Technical documentation and record keeping, • Cross-functional collaboration, • Problem solving and critical thinking, • Project and timeline management, • Strong communication skills, • Attention to detail and quality focus, • Innovation and continuous improvement Education: • BA/BS degree is required

We are At Synechron, we believe in the power of digital to transform businesses for the better. Our global consulting firm combines creativity and innovative technology to deliver industry-leading digital solutions. Synechron’s progressive technologies and optimization strategies span end-to-end Artificial Intelligence, Consulting, Digital, Cloud & DevOps, Data, and Software Engineering, servicing an array of noteworthy financial services and technology firms. Through research and development initiatives in our FinLabs we develop solutions for modernization, from Artificial Intelligence and Blockchain to Data Science models, Digital Underwriting, mobile-first applications and more. Over the last 20+ years, our company has been honored with multiple employer awards, recognizing our commitment to our talented teams. With top clients to boast about, Synechron has a global workforce of 14,500+, and has 58 offices in 21 countries within key global markets. Additional Information* The base salary for this position will vary based on geography and other factors. In accordance with law, the base salary for this role if filled within New Jersey $125k - $130k/year & benefits (see below). Title: Data Bricks Lead Location: Warren, NJ • Lead the architecture and implementation of Databricks-based data platforms., • Design scalable batch and real-time data pipelines using Apache Spark, Delta Lake, and Structured Streaming., • Develop and optimize ETL/ELT workflows using Python, SQL, and orchestration tools., • Establish best practices for data modeling, performance tuning, monitoring, and cost optimization., • Implement data governance, security, access controls, lineage, and cataloging using Unity Catalog and related tools., • Integrate Databricks with cloud platforms, data warehouses, APIs, and enterprise applications., • Lead technical design reviews, code reviews, and engineering standards., • Mentor data engineers and provide guidance on Databricks development practices., • Collaborate with product owners, analysts, data scientists, and business stakeholders to translate requirements into robust data solutions., • Support CI/CD, automated testing, deployment, and operational support for data workloads. Required Qualifications • Bachelor’s degree in Computer Science, Engineering, Information Systems, or a related field., • 7+ years of experience in data engineering, big data, or cloud data platforms., • 3+ years of hands-on experience with Databricks and Apache Spark., • Strong proficiency in Python and SQL., • Experience with Delta Lake, Databricks Workflows, notebooks, cluster configuration, and performance tuning., • Experience with at least one major cloud platform: Azure, AWS, or Google Cloud., • Strong understanding of data warehousing, data lakes, dimensional modeling, and distributed processing., • Proven experience leading technical teams or complex data engineering initiatives. Preferred Qualifications • Databricks Certified Data Engineer or related certification., • Experience with Unity Catalog, Delta Live Tables, MLflow, or Databricks SQL., • Knowledge of Azure Data Factory, Airflow, dbt, Kafka, Terraform, or equivalent tools., • Experience implementing CI/CD using GitHub Actions, Azure DevOps, Jenkins, or similar platforms., • Familiarity with data governance, privacy, security, and regulatory requirements., • Experience working in Agile delivery environments. We offer: • A highly competitive compensation and benefits package., • A multinational organization with 58 offices in 21 countries and the possibility to work abroad., • 10 days of paid annual leave (plus sick leave and national holidays)., • Maternity & paternity leave plans., • A comprehensive insurance plan including medical, dental, vision, life insurance, and long-/short-term disability (plans vary by region)., • Retirement savings plans., • A higher education certification policy., • Commuter benefits (varies by region)., • Extensive training opportunities, focused on skills, substantive knowledge, and personal development., • On-demand Udemy for Business for all Synechron employees with free access to more than 5000 curated courses., • Coaching opportunities with experienced colleagues from our Financial Innovation Labs (FinLabs) and Center of Excellences (CoE) groups., • Cutting edge projects at the world’s leading tier-one banks, financial institutions and insurance firms., • A flat and approachable organization., • A truly diverse, fun-loving, and global work culture. SYNECHRON’S DIVERSITY & INCLUSION STATEMENT Diversity & Inclusion are fundamental to our culture, and Synechron is proud to be an equal opportunity workplace and is an affirmative action employer. Our Diversity, Equity, and Inclusion (DEI) initiative ‘Same Difference’ is committed to fostering an inclusive culture – promoting equality, diversity and an environment that is respectful to all. We strongly believe that a diverse workforce helps build stronger, successful businesses as a global company. We encourage applicants from across diverse backgrounds, race, ethnicities, religion, age, marital status, gender, sexual orientations, or disabilities to apply. We empower our global workforce by offering flexible workplace arrangements, mentoring, internal mobility, learning and development programs, and more. All employment decisions at Synechron are based on business needs, job requirements and individual qualifications, without regard to the applicant’s gender, gender identity, sexual orientation, race, ethnicity, disabled or veteran status, or any other characteristic protected by law.

About Doceree Doceree is the world's only AI-powered Operating System for healthcare marketing. We aim to be a catalyst for change, improving healthcare by enabling more meaningful interactions with HCPs. Our patented AI brings deeper context to every HCP touchpoint-understanding who HCPs are, what they're exploring, how they engage, and when they make decisions, all in a privacy-compliant way. With this enriched context, every message becomes clearer, more relevant, and more likely to drive better healthcare outcomes. In our journey of 5 years, we have earned four patents for innovation and even won a Silver award at the Cannes Lions, one of the world's top advertising honors. Over the years, we've also had the opportunity to work with 115+ pharma companies and collaborate with 30+ media publications, 150+ EHR platforms, 2,000+ publisher networks, and 35+ hospitals and health systems. Our ecosystem connects us with more than 6 million verified doctors worldwide. Today, Doceree operates across 25+ countries, with teams based in New Jersey, London, and India. Technology can connect the fragmented healthcare ecosystem to deliver information when it is most needed to improve patients' outcomes. We are expanding our footprints across the globe and enhancing our services, offering, and developing new products and solutions to address the unmet needs of industry. Purpose of the Job We are looking for a Partnership Success Manager - Supply, to serve as the primary bridge between Demand teams and Global Supply partners, helping partners maximize monetization opportunities and drive partner satisfaction. The role will work closely with Demand, Ad Operations, Supply, TAMs, and other teams to activate new opportunities, formats, and capabilities. The ideal candidate is customer-focused, commercially minded, analytical, organized, proactive, and comfortable coordinating across multiple teams in a fast paced environment. Key Responsibilities • Act as the primary demand-side point of contact for global supply partners, including direct publishers, POC platforms and network partners., • Communicate demand-side requirements, timelines, testing needs, and launch readiness for new initiatives, ad formats, and inventory opportunities to supply partners., • Monitor partner monetization and identify gaps or opportunities to improve demand activation and revenue., • Gather relevant partner data points to help Demand teams effectively position supply with advertisers., • Coordinate across Demand, Ad Operations, Supply, TAMs, Product/Engineering and other teams to move opportunities & campaigns through launch and resolve blockers., • Support strategic initiatives and special projects from the demand side., • Provide responsive, high-quality partner communication and support to maintain strong partner satisfaction. Qualifications - Experience, Skills & Education • 5+ years of experience in customer success, publisher partnerships, account management, program management, operations, ad operations, or a related role., • Experience working with publishers, media companies, SSPs, DSPs, ad tech platforms, or digital advertising is strongly preferred., • Strong customer-service mindset with the ability to build trusted relationships with external partners., • Excellent communication and interpersonal skills, with the ability to work effectively with both external partners and internal stakeholders., • Strong project and organizational skills, with the ability to manage multiple partners, requests, and initiatives simultaneously., • Ability to understand technical and operational concepts and communicate them clearly to non-technical audiences., • Strong problem-solving skills and a proactive approach to identifying and resolving partner issues., • Comfortable coordinating across teams and driving outcomes without direct authority., • Ability to operate effectively in a fast-paced environment where products, formats, and processes are continuously evolving., • Strong analytical skills., • Strong attention to detail and follow-through. Key Competencies • Publishers have a strong, responsive, and consistent experience working with us., • Partner issues and requests are addressed quickly and effectively., • New formats, products, and initiatives are successfully launched and adopted by supply partners., • Publisher feedback is consistently captured and translated into actionable improvements., • Internal teams have clear visibility into publisher needs, priorities, and challenges., • Processes become more scalable and efficient as the publisher network grows., • Strong, long-term relationships are developed with key supply partners. Why Explore a Career at Doceree Doceree has been recognized and certified Best places to work NJ 2023 and Great Place to work 2026. If you are passionate about health technology and have a knack for turning complex concepts into compelling narratives, we invite you to apply for this exciting opportunity to contribute to the success of our innovative health tech company. Doceree USA Benefits • Competitive Salary Package, • Performance Based Bonuses, • Generous Leave Policy, • Flexible Working Hours, • Health Care Benefits, • 401K + 4% Matching, • Extensive Paid Parental Leave Doceree DEI Vision & Mission Doceree DEI (Diversity, Equity & Inclusion) is to create and sustain a one team culture globally with a mission to provide equal opportunity to people from diverse social, cultural, physical and psychological backgrounds and do not discriminate on the basis of race, colour, religion, national origin, sex, age, citizenship status, disability status, genetic information, sexual orientation, or gender identity or expression of an otherwise qualified individual, or membership in any other class protected by applicable law. Doceree fosters an inclusive culture by inculcating a sense of belonging within our ONE team through appropriate behaviours, policies and systems, while also being fair to one and all. To support this Doceree has taken formal strides with a 5C model and 4E's pledge, to ensure, encourage and exhibit our commitment to DEI, and move towards our DEI vision.

Department: Engineering Employment Type: Full-Time Reports To: Engineering Management Work Arrangement: Onsite – Monday-Friday About the Company: At Lincoln Electric Products Co. Inc., we specialize in the design, manufacture, and distribution of custom equipment tailored to meet the specific applications and requirements of our customers. Our product range includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations We pride ourselves on delivering high-quality, custom-designed solutions that address the unique needs of our clients across various industries. Position Summary Lincoln Electric Products Co. is seeking an experienced Senior Mechanical Engineer – Skid / Integrated Solutions to support the design and development of integrated, skid-mounted equipment and power distribution solutions. This is a senior-level mechanical engineering position requiring hands-on experience designing skid-mounted systems and integrated equipment packages. The successful candidate will be responsible for the mechanical design, layout, integration, and manufacturability of complex skid assemblies while working closely with Electrical Engineering, Manufacturing, Project Management, Applications Engineering, vendors, and customers. Direct skid design and integrated solutions experience is required for this position. Key Responsibilities • Lead the mechanical design and development of skid-mounted and integrated equipment solutions from concept through manufacturing and final installation., • Develop complete mechanical layouts, assemblies, structural frames, equipment supports, enclosures, mounting arrangements, and associated components., • Integrate electrical equipment, switchgear, switchboards, transformers, controls, and other system components into skid-mounted assemblies., • Develop and review 3D models, detailed drawings, fabrication drawings, bills of materials (BOMs), and manufacturing documentation., • Perform mechanical design calculations and evaluate structural integrity, loading, equipment clearances, weight distribution, lifting requirements, transportation constraints, and installation requirements., • Ensure designs consider manufacturability, serviceability, accessibility, safety, transportation, and field installation., • Work closely with Electrical Engineers to ensure proper mechanical and electrical integration of equipment., • Partner with Manufacturing and Fabrication teams to resolve design and production issues and improve designs for manufacturability., • Provide technical guidance and engineering support throughout fabrication, assembly, testing, and installation., • Review customer specifications, drawings, technical requirements, and project documentation., • Participate in design reviews and identify technical risks before release to manufacturing., • Coordinate with suppliers and vendors regarding components, fabricated assemblies, and technical requirements., • Support continuous improvement, standardization, cost reduction, and development of repeatable skid/integrated solution designs., • Troubleshoot complex mechanical and integration issues during production and field implementation., • Mentor and provide technical guidance to less-experienced engineers and designers as needed. Required Qualifications • Bachelor's degree in Mechanical Engineering or a related engineering discipline., • 7+ years of progressive mechanical engineering/design experience, preferably in engineered-to-order manufacturing or complex industrial equipment., • Demonstrated professional experience designing skid-mounted equipment, packaged systems, or integrated equipment solutions., • Strong experience with mechanical equipment layout, structural frames, fabricated assemblies, mounting systems, and equipment integration., • Experience designing products that move from engineering into fabrication and manufacturing., • Proficiency with 3D CAD design software such as SolidWorks, Inventor, Creo, or equivalent., • Strong understanding of engineering drawings, GD&T, BOMs, fabrication methods, welding, sheet metal, and manufacturing processes., • Ability to work effectively across Mechanical Engineering, Electrical Engineering, Manufacturing, Project Management, and other departments., • Strong problem-solving skills with the ability to manage multiple technically complex projects. Preferred Qualifications • Experience with electrical power distribution equipment, including switchgear, switchboards, transformers, power distribution systems, or similar equipment., • Experience within a switchgear/switchboard OEM, data center infrastructure, modular power systems, packaged power solutions, or similar engineered-to-order manufacturing environment., • Knowledge of structural steel design, welded assemblies, sheet metal fabrication, and enclosure design., • Experience with modular or prefabricated electrical/mechanical systems., • Familiarity with applicable industry standards, codes, and customer specifications., • Experience supporting equipment through fabrication, assembly, factory testing, transportation, and field installation.

Role overview: • Job title – Application Security Specialist, • Department – IT Security, • Level – Vice President, • Reports to – Director, Application Security, • Location – New Jersey, • Compensation – $140,000–$180,000 base salary + variable compensation + 401(k) match + benefits We’re hiring an Application Security Specialist to help development teams build secure, resilient software. This is a hands-on AppSec role for someone who can interpret security findings, understand real-world application risk, and turn that insight into practical guidance for engineers. This is not a DevSecOps tooling integration role: engineering teams own security tool integration, automation, and pipeline operation. Your focus will be on understanding the output of those tools, separating meaningful risk from noise, and partnering with developers to improve the security of the code we write. What you’ll do: • Analyze and validate findings from SAST, DAST, SCA, API security testing, AI-assisted analysis, penetration testing, and code reviews., • Assess vulnerabilities in context, considering exploitability, business impact, compensating controls, and realistic application risk., • Work closely with development teams to explain issues clearly, prioritize remediation, and support secure implementation choices., • Lead or facilitate threat modelling, secure design reviews, and architecture risk reviews for new features, services, APIs, and platforms., • Promote secure coding standards, reusable security patterns, and practical guidance that reduce recurring vulnerability themes., • Provide AppSec subject-matter expertise to improve security testing, reporting, and SDLC processes without owning pipeline integration or tool administration. What you’ll bring: • Strong experience in application security, secure coding, secure-by-design practices, application security testing, and vulnerability management., • Solid understanding of common application and API vulnerability classes, including the OWASP Top 10, and how to remediate them in modern software environments., • Ability to read and reason about code well enough to validate findings, identify root causes, and discuss remediation options with developers., • Experience with threat modelling, architecture risk reviews, secure design reviews, or similar AppSec activities., • Practical knowledge of SAST, DAST, SCA, API security, secrets detection, and related testing approaches, with an emphasis on interpreting results rather than administering tools., • Working knowledge of at least one programming language such as Java, Python, JavaScript, C#, or Go., • Clear communication skills and the ability to translate security risk into practical guidance for engineering, product, and technology leadership audiences., • Collaborative mindset, sound risk judgement, and a coaching style that helps development teams improve their security capability over time. Qualifications: • Degree in a technology discipline such as Computer Science, Information Management, Computer Engineering, Cybersecurity, or equivalent practical experience., • Relevant security certifications such as CISSP, CSSLP, GWAPT, GWEB, or equivalent are preferred but not required.

🏢 Who we are Team Beans/Forever Collectibles (FOCO) is a worldwide leading manufacturer of sports and entertainment merchandise, including products ranging from collectibles and novelty items to promotional memorabilia. With all the major sports licenses at our fingertips, along with a powerful infrastructure and a broad variety of products, our company is reaching new heights every day. The success of FOCO’s expansion is directly related to our ability to bring fresh designs and manufacturing techniques to categories in need of innovation. We are constantly searching for dedicated and driven professionals to join and help grow our team! 🔍 The Opportunity We're looking for a Quality Assurance & Compliance Associate to join our Supply Chain Quality & Production team. This role supports our U.S. - based quality operations and plays a key part in ensuring every product meets FOCO's safety, compliance, and performance standards before shipment. If you have an eye for detail, an interest in product development and compliance, and a desire to grow within a dynamic CPG organization, we want to hear from you. 🎯 What You’ll Do ✅ Product Quality Assurance & Control • Support pre-shipment inspections and in-line quality checks, • Review test reports, factory submissions, and inspection documents for accuracy, • Maintain QA/QC logs, trackers, and documentation in digital systems, • Assist with rework coordination and issue resolution when defects arise 🌐 Supplier Compliance & CSR • Help manage documentation for supplier compliance (SEDEX, FLA, FLMA, NCAA, Disney, Walmart, Amazon, etc.), • Support audits and compliance requirements with internal teams and vendors, • Communicate directly with suppliers on submission needs and expectations 📄 Product Specs & Safety • Assist in creating and maintaining product specifications and packaging confirmations, • Ensure all products comply with general product safety regulations and retailer standards, • Collaborate with product teams on early risk assessment reviews 🤝 Cross-Functional Collaboration • Coordinate with FOCO’s global offices, including China-based QA teams, to monitor sample statuses, testing, and inspection progress, • Liaise with sourcing, design, and production teams to close quality loops, • Provide technical documentation support to suppliers 📊 Quality Reporting • Track customer complaints and assist with identifying trends, • Contribute to monthly QA scorecards and internal reports 📚 Training & Development • Complete training in QA systems, product safety, and compliance, • Participate in online learning modules to build industry-specific knowledge ✈️ Travel • Up to 30-35% travel to Asia (China) for factory visits, audits, and inspections as required 💼 What You’ll Need • Strong attention to detail and organizational skills, • Excellent communication and follow-up abilities, • Ability to manage multiple projects in a fast-paced environment, • Proficiency in Microsoft Office (Excel, Word, Outlook); experience with QA systems a plus, • A collaborative, curious mindset and willingness to learn, • Previous QA/QC or product compliance experience is a bonus, but not required 🌟 Why FOCO? • Work with passionate people at the intersection of sports, entertainment, and innovation, • Learn and grow inside a fast-moving global CPG organization, • Access to competitive compensation and career development support, • Make an impact on products that reach millions of fans worldwide Tryouts are open at FOCO! If you're ready to kick off your career in product quality and compliance, this is your shot. 📩 Apply now and help us deliver products that fans can trust.

Title: Integration Lead (SAP CPI/Dayshape Workforce Management Systems) Hybrid 3 days in office in Iselin, NJ No Visa Restrictions (RESPOND W YOUR Candidates through this Job Description) Rate: Open Term: 6 months renewable Key's are SAP S4 integration to DayShape Workforce Management System or other WMS like Profinda, Certinia, Retain). Technical Integration Lead – US The Technical & Integration Lead owns the technical health, configuration, and integration roadmap execution of Dayshape and the firm's Resource Management portfolio. Line systems and partners closely with Resource Management and technology leadership, the Dayshape vendor team, and ETI's team functions to keep the platform reliable, integrated, and audit-ready. Dayshape Technical Integration Lead Responsibilities: • Serve as technical and integration owner for Dayshape and other resource management integrated applications, accountable for integrations build and support, cutover, environment health, and platform roadmap alignment., • Maintain current architecture and integration of SAP BTP / CPI as enterprise middleware; design and build integration across various systems and keep documentation audit-ready., • Design and manage integrations between Dayshape and upstream/downstream systems (SAP, BTP, Workday, CRM, MS Fabric and others)., • Lead technical delivery of Dayshape implementation for Assurance and rollouts to Advisory and Tax, translating high level business requirements into technical requirement and specifications., • Manage the release calendar for Dayshape updates, patches, and configuration changes, coordinating testing and rollback plans., • Track and resolve platform incidents, escalating to the Dayshape vendor team, • Support internal and external audit requests with technical evidence, configuration records, and change logs., • Act as the primary technical liaison between Resource Management, ETI, and the Dayshape product/CS teams., • Translate technical constraints and roadmap trade-offs into clear, decision-ready updates for non-technical stakeholders., • Guide offshore and onshore developers or configuration analysts supporting the platform; set technical standards and review quality of delivered work. Minimum Qualifications: • 10+ years of experience administering or engineering enterprise SaaS platforms, with direct experience on Dayshape or comparable Resource management platforms (e.g., Profinda, Certinia, Retain)., • Demonstrated experience owning platform configuration, integrations, and release management for a business-critical application., • Working knowledge of tax and accounting firm workflows: particularly in Resource Management area., • Strong understanding of access control, data security, and controls relevant to a professional services / regulated environment., • Proven ability to manage vendor relationships and hold third-party platform providers accountable to SLAs., • Excellent written and verbal communication skills, with the ability to brief both technical teams and firm leadership. Ideally, You’ll Also Have: • Prior experience at a public accounting or professional services firm, • Familiarity with Azure-based enterprise architectures and enterprise identity/SSO frameworks., • Experience managing globally distributed (onshore/offshore) technical teams., • Background in Agile delivery, including backlog management and sprint-based release cycles., • Available to work from Iselin, NJ, US

Job Description About Eos Energy Enterprises Eos Energy Enterprises, Inc. is accelerating the shift to American energy independence with positively ingenious solutions that transform how the world stores power. Our breakthrough Znyth™ aqueous zinc battery was designed to overcome the limitations of conventional lithium-ion technology. It is safe, scalable, efficient, sustainable, manufactured in the U.S., and the core of our innovative systems that today provides utility, industrial, and commercial customers with a proven, reliable energy storage alternative for 3 to 12-hour applications. Eos was founded in 2008 and is headquartered in Edison, New Jersey. For more information about Eos (NASDAQ: EOSE), visit _. Eos Product Compliance team is looking for a compliance engineer to join our Global Certifications Team for large scale Energy Storage Systems. The qualified candidate must have global standards practices such as UL and IEC testing knowledge and practices. In this role you will work with NRTL’s in conjunction with the Eos Product Design Team. You will be responsible for regulatory product design such as creepage a clearance evaluation, IP rating, critical component evaluation (UL/VDE), UL 94/UL746 and developing end to end product validation test plans, final reports, schedules, product test, presenting and communicating final results. This candidate must have the willingness to travel for up to 3 continuous weeks during certification testing. Responsibilities • Regulatory product architecture and design., • Support the research of new market entry requirements., • Review of products, specifications, and test plans., • Developing test criteria, methodologies, and pass/fail criteria., • Work with NRTL’s to achieve product compliance., • Working knowledge of the NRTL Data Acceptance Program., • Record keeping skills as it pertains to Test Laboratory Accreditations and Corrective Actions, • Record keeping product certification test plans, reports, certification and factory inspections Knowledge, Skills, and Abilities • Strong understanding of UL, CSA and CE process including CB Scheme, plus APAC regulations. Environmental compliance for RoHS, Weee, Reach and LCA is a plus., • Compliance certification experience; UL 1973, UL 9540, UL 9540A, UL 1741, UL 62368-1, IEC 62619, CSA 22.2 No. 107.1, NFPA 70 and NFPA 855. Knowledge of Functional Safety is a plus., • Understand safety concepts (Electrical and battery) – Risk based approach., • Demonstrated experience taking products through the certification process., • Ability to navigate/interpret ambiguity of standards., • Knowledge of EMC/EMI Testing, • Proven track record in product certifications, • High voltage/power experience, • Experience with a multitude of laboratory equipment and data acquisition tools Education and Experience • Bachelor's degree in electrical or mechanical engineering or equivalent required., • 3-5 years of experience required. Travel • Overnight/North America: 25-50% Working Conditions • Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 25 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body., • Factory - The worker may be subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, vibration, moving vehicles, electrical current, exposure to temperature changes or exposure to chemicals. While performing the duties of this job, the employee may be exposed to fumes, airborne particles, odors, dust, mists, and gases. The noise level in the work environment can be loud. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Machinery operation requires the use of safety equipment to include but not limited to eye safety glasses, hearing protectors, work boots, and lab coats. May be required to exert up to 50 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.

About the Role Looking for a QA Project Manager to lead quality engineering across a portfolio of critical programs in its financial services and payments business. You'll own QA strategy, governance, budgets and delivery across several product lines. You'll manage QA project managers, test leads and vendor partners, and act as the main quality contact for senior leadership. Key Responsibilities • Own QA delivery for a portfolio of large programs (platform modernization, cloud migration, regulatory and client implementations), • Set the program-level QA strategy, roadmap and operating model, in line with Fiserv's technology and business goals, • Set up and run QA governance: entry and exit criteria, quality gates, release readiness reviews and go/no-go decisions, • Manage QA budgets, forecasts and resource plans across onshore, offshore and vendor teams, including SOWs, vendor performance and cost, • Lead and mentor QA project managers, test managers and automation leads, • Report program health, quality KPIs, risks and issues to executive stakeholders through regular dashboards and steering committee updates, • Drive QA transformation: grow test automation, shift-left practices, CI/CD and continuous testing, and AI-assisted testing, • Manage cross-program dependencies, shared test environments and test data, • Standardize QA processes, tools and templates through a QA Center of Excellence (CoE) model, • Keep testing compliant with regulatory, audit and security requirements (PCI-DSS, SOX, SOC), • Find program-level risks early and lead mitigation and escalation Required Qualifications • Bachelor's degree in Computer Science, Information Systems, Engineering or a related field (Master's preferred), • 15+ years in software QA, including 5+ years as a QA Project Manager, Test Project Manager or QA Delivery Head, • Has managed multimillion-dollar QA budgets and large distributed teams (50+ people, onshore and offshore), • Strong background in Agile at scale (SAFe), hybrid and Waterfall delivery models, • Has led QA for enterprise transformation programs, such as cloud migration, core platform modernization or large client conversions, • Expert in JIRA, Confluence, test management tools (Xray, Zephyr, qTest, ALM), and reporting tools (Power BI, Smartsheet, MS Project), • Solid understanding of test automation, performance testing, API testing and DevOps/CI/CD practices, • Excellent executive communication, negotiation and stakeholder management skills Preferred Qualifications • Banking, payments, card processing or core banking domain experience, • PMP, PgMP, SAFe (SPC/RTE) or ISTQB Advanced Test Manager certification, • Experience setting up or running a QA Center of Excellence, • Experience with vendor and MSP management models, • Exposure to mainframe and distributed system testing in regulated environments

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25 / hr. and $45 / hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. We are a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. Main Duties : Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.) Take care of the product being tested and use it responsibly Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.) Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses) There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm Write reviews as requested in the In-Home Usage Test Daily Schedule for each project Requirements : Ability to follow specific instructions Excellent attention to detail and curious spirit Be able to work 15-25 hours per week and commit to a certain routine Have access to a computer and a reliable internet connection Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. Benefits : Very competitive pay rate Weekly pay Work around your own schedule Learn about an exciting industry Telecommute (you can work from home, work or school) Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25 / hr. and $45 / hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. We are a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. Main Duties : Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.) Take care of the product being tested and use it responsibly Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.) Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses) There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm Write reviews as requested in the In-Home Usage Test Daily Schedule for each project Requirements : Ability to follow specific instructions Excellent attention to detail and curious spirit Be able to work 15-25 hours per week and commit to a certain routine Have access to a computer and a reliable internet connection Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. Benefits : Very competitive pay rate Weekly pay Work around your own schedule Learn about an exciting industry Telecommute (you can work from home, work or school) Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested