Trabajos production technician en Commack, New YorkCrear alertas

Job DescriptionDescription: Position Summary: A Packaging Set Up Technician is primarily responsible for the set up of various packaging equipment including but not limited to tablet fillers, bottle unscramblers and cleaners, cappers, cottoners, desiccant feeders, check weighers, metal detectors, labelers, cartoners, ink jet printers, etc. • Multiple Shifts Available – Day, Night, Weekend; Full-Time & Part-Time Opportunities Responsibilities: Responsibilities include, but are not limited to: • Ensure proper set-up of the packaging line before and during a job run., • Ensure the line is running at its target rate during a job run., • Troubleshooting of packaging equipment. Report any equipment issues to management., • Complete set-up sheets., • Complete work order and part order requests., • Comply with company policies, SOPs and cGMPs., • Follow all procedures set forth in the set-up procedures., • Operate all equipment in a safe and efficient manner., • Assists fellow technicians and the Line Leaders., • Other responsibilities as assigned by senior management.Requirements: Education and Experience: • High School or GED diploma preferred., • Prior mechanical or machine operator experience required., • Experience in set-up and troubleshooting pharmaceutical packaging equipment required. Skills, Knowledge, and Abilities: • Ability to follow instructions and work independently to meet deadlines., • Ability to understand the basic principles of packaging., • Must be able to multi-task and follow-up when responses are needed., • Ability to communicate effectively and be able to respond to verbal and written instructions., • The ability to identify, locate, and transport parts which requires reading, counting, and performing simple math calculations., • Must be able to utilize basic hand tools and identify correct fastener sizing., • Physical effort may be required which includes prolonged standing, lifting, climbing, bending, moving or carrying heavy materials. Physical Demands and Work Environment • Work environment in production operations facilities include proximity to heavy machinery and pharmaceutical powders, with exposure to loud noises., • Constantly required to use hands and fingers to feel, handle or operate controls and tools and reach with hands and arms., • The operation of certain machinery requires eye, hand, and foot coordination., • While performing the duties of this job, the employee is regularly required to move, stoop, kneel, crouch, climb, stand, bend, sit, talk, hear, or walk for prolonged periods. The employee may lift, move and or carry up to 50 lbs., • Vision abilities required include close vision, distance vision, peripheral vision, color vision and the ability to adjust focus., • Hours/Travel maybe subject to changed based on management/company discretion. Potential to move between production operations sites/areas to complete job functions requiring the use of a personal vehicle. Personal Protective Equipment Required for Position: • PPE / GMP gowning Supervisory Responsibilities: • None Pay Range*: • Setup Technician I: $24.00 - 25.50 (1+ year experience), • Setup Technician II: $26.00 - 27.50 (3+ years' experience), • Setup Technician III: $28.00 - 29.50 (5+ years' experience) *Ranges indicated account for all shifts. Please indicate your shift preference when applying.

Role overview We’re hiring a Senior Machinist: CNC / GD&T / G&M Code / Setup with hands-on experience setting up and running multi-axis CNC equipment. You’ll own setups end-to-end, help prove out new programs, and support both R&D builds and short production runs. What you’ll do • Read and interpret engineering drawings, setup sheets, and related documentation; apply GD&T requirements., • Set up and operate multi-axis CNC milling and turning equipment (including mill-turn / live tooling where applicable)., • Configure workholding and fixtures (vise, soft jaws, tombstones, custom fixtures) per setup documentation and best practices., • Run, validate, and help prove out new CNC programs; support first-article / first-piece verification., • Diagnose machining issues and make minor program/parameter adjustments (feeds/speeds, offsets) during runs., • Perform in-process and final inspection using standard precision metrology tools; document results as required., • Maintain machines and work area (basic preventive care, cleanliness, chip/coolant management)., • Adapt between fast-turn prototype/R&D work and short-run production while maintaining quality and repeatability. Required qualifications • 3+ years experience as a CNC machinist/operator and setup technician in a precision environment., • Must be proficient in G-Code and M-Code programming with the ability to troubleshoot, edit, prove out processes, perform first piece runs, and recommend changes to programs on multi-axis machine tools proficiently., • Experience with multi-axis machining (3+1 / 3+2); familiarity with complex toolpaths and 3D surfaces., • Experience with live-tooling lathes, mill-turns, or multi-task machines., • Working knowledge of machining a range of materials (e.g., aluminum alloys, stainless, alloy steels, and other engineering materials)., • Solid understanding of tooling, tool life, cutters, and fixturing methods., • Intermediate ability to interpret and apply GD&T., • Able to take ownership of the setup and run process from start to finish; comfortable juggling multiple competing priorities., • U.S. Person status required due to access to export-controlled technical data. Preferred qualifications • Experience with simultaneous 5-axis setup and operation., • Experience working with Okuma CNC machines and controllers., • Comfortable referencing a CAD model to verify dimensions/features (model-based measurement)., • Experience with CMM inspection (e.g., PC-DMIS or similar)., • Waterjet experience. Additive manufacturing exposure (e.g., FDM/SLA) and/or post-processing familiarity. About the team The CNC Machining team works directly with the engineering and manufacturing teams to produce precision components for propulsion and vehicle systems. About iRocket Founded in 2018, Innovative Rocket Technologies Inc. is revolutionizing the space industry as the first fully autonomous and 100% reusable rocket manufacturer. iRocket is building the world’s first reusable rocket engines with a setup focused on reusability from the beginning, including high performance and long life. We will Recondition, Reload, and Relaunch™ our rockets synonymous with how we use airplanes today for multiple daily flights in under 24 hrs. achieving reusability 2.0. Utilizing cutting-edge 3D printing and additive manufacturing technology, we’re dedicated to providing reliable and rapid access to space at a low cost. Our innovative design addresses the inefficiencies in the industry, while our proprietary reusable engine technology positions us as the leading small launch service provider. Join us on our journey to space. Benefits What we offer • Benefits: [Health/Dental/Vision/401(k)/PTO], • High-impact work on real aerospace hardware, • Fast-paced environment with direct collaboration across engineering, test, and manufacturing

Job Description Dental Lab Technician Location: Hauppauge, NY Pay: $25-35/hour - Based on Experience Job Type: Full-Time or Part-time Pure Dental Lab is expanding its digital dental lab team in Hauppauge and seeking a motivated, detail-oriented Dental Lab Technician for a full-time, mid-level role. The technician will support high-volume production and complex implant cases, working with implant restorations, crowns and bridges, dentures and partials, and mixed restorative cases. This dedicated fabrication role operates within a cross-functional digital workflow using advanced CAD/CAM design, 3D printing, and milling systems, with opportunities for paid training, professional growth, and advancement toward a CAD Designer role. Compensation is based on experience. Responsibilities • Fabricate and finish implant restorations, crowns and bridges, dentures and partials, and mixed restorative cases., • Perform quality control on dental restorations with precision and consistency., • Conduct digital scanning and operate 3D printers and milling equipment., • Maintain and support scanners, mills, and 3D printers., • Coordinate with design, milling, and finishing teams across the digital workflow., • Follow prescription forms, production timelines, and internal quality-control standards., • Support high-volume production and complex implant case workflows., • Maintain an organized workspace and efficient production flow. Required Qualifications • Excellent manual dexterity and attention to detail., • Reliable, organized, and able to follow digital and manual workflows., • Positive, team-oriented attitude with a willingness to learn., • Interest in growth and development within a modern, technology-driven environment. Preferred Qualifications • At least one year of experience in dental laboratory technology., • Dental laboratory technology training or certification., • Experience with dental restoration fabrication and finishing., • Experience with 3D printing, dental milling, and digital scanning., • Strong attention to detail and team collaboration skills.\nCompany Description Passaic County's most advanced dental implant center — fully digital workflow, in-house lab, board-certified implant specialists. A permanent new smile in as little as 4 hours, right here in northern New Jersey. Passaic County's most advanced dental implant center — fully digital workflow, in-house lab, board-certified implant specialists. A permanent new smile in as little as 4 hours, right here in northern New Jersey.

Title: Chemistry Technician Job Type: Full-time | On-site Company Summary: Radienz Living is a leading North American manufacturer of home and personal care products, such as unit dose laundry and dish products, facial wipes, and baby wipes. With manufacturing plants and warehouses in Chicago and Long Island, NY, the company provides customers with private-label solutions and contract manufacturing services for products found in retail and institutional markets. Through its commitment to agility, innovation, trust and reliability, and sustainable creation, Radienz Living is passionate about providing its customers with products that support a cleaner way of living and a more radiant world. The company has undergone a remarkable transformation over the years, focusing on two product lines: Unit Dose products, where it is the undisputed leader in Private Label and Contract Manufacturing, and Personal Care Wipes, where it manufactures the wipes for the country's #1 beauty care brand. Our commitment to operational excellence is supported by robust quality systems, multiple GMP certifications, and a comprehensive suite of in-house labs—including FDA/EPA-certified microbiology, quality control, chemistry, and R&D facilities. This infrastructure enables us to deliver innovation, safety, and performance at every stage of the product lifecycle. Background: The Chemistry Technician applies knowledge and skills to perform diverse and complex laboratory procedures and /or specialized technical, administrative services requiring application of equivalent technical knowledge in a quality control laboratory. Responsibilities: • Perform organoleptic evaluation, pH analysis, titrations and routine analytical testing of raw materials, in-process samples and finished goods, • Maintain GLP lab records and issue test reports., • Experience with HPLC and FTIR in manufacturing setting a plus, • Calibrate and maintain lab instruments, ensuring a clean and organized workspace., • Adhere to safety protocols, GMP (Good Manufacturing Practices), and Standard Operating Procedures (SOPs) that are in effect assuring the quality and quantity of product produced., • Openness to learn new instruments methods and positions. Experience with HPLC and FTIR in manufacturing setting a plus Qualifications: • 1-3 years analytical laboratory experience preferred, • Openness to learn new instruments methods and positions., • Associate or Bachelor's degree in chemistry or related science preferred. High school diploma with relevant laboratory experience would be accepted., • Previous experience in production, manufacturing, or chemical industries (food or pharma preferred). Strong attention to detail, proficiency in basic lab equipment (e.g., pH meters, viscometers), and good, • documentation practices. Work Environment: • Work is performed primarily in a laboratory and manufacturing environment where exposure to biological agents, chemicals, and disinfectants may occur., • The role requires adherence to all safety procedures, including the use of PPE and compliance with Good Laboratory Practices (GLP) and Good Manufacturing Practices (GMP)., • The noise level in the work environment is generally moderate but may vary depending on production activity., • The laboratory environment is temperature-controlled, but occasional work in production or warehouse areas may be required., • The employee must maintain a clean, organized, and safe workspace in accordance with company and regulatory standards. Why Join Us? At Radienz Living, we take pride in making high-quality personal care and household products that people trust every day. As part of our team, you’ll join a company that values safety, teamwork, and continuous improvement. We believe in investing in our people — providing hands-on experience, training, and opportunities to grow your career in manufacturing, quality, and operations. You’ll work in a clean, professional, and collaborative environment where your contributions make a direct impact on the products we deliver to leading brands and consumers. At Radienz Living, we’re more than a manufacturing company — we’re a community built on respect, reliability, and shared success. The approximate hourly pay for this position is $22-00-$27.00*. Please note that the pay range provided is a good faith estimate for the position at the time of posting. Final compensation may vary based on factors including but not limited to knowledge, skills and abilities as well as geographic location. Radienz Living is an equal employment opportunity employer. All applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status or any other characteristic protected by applicable law. Prior to the next step in the recruiting process, we welcome you to inform us confidentially if you may require any special accommodation to participate fully in our recruitment experience. Contact us at hrny@radienzliving.com. The company participates in the E-Verify program to confirm the employment eligibility of all new hires. This position is not eligible for Visa Sponsorship.

Job DescriptionDescription: Northeast Aero Compressor and PG Aerotech are seeking an experienced Facilities Technician II to help maintain the safe, compliant, and efficient operation of our 55,000 square foot FAA Part 145 certificated repair station and MRO facility in Hauppauge, NY. This is a mid-level, hands-on role for a technician who has moved beyond entry-level building maintenance and is ready to take on greater ownership of preventive maintenance programs, more complex mechanical and electrical troubleshooting, and vendor coordination — while continuing to perform daily hands-on repair and upkeep work. The Facilities Technician II reports to the Production Manager and works closely with them to keep all building systems, ground support equipment, and industrial machinery running reliably. Requirements: • Perform routine and corrective maintenance on HVAC, electrical, plumbing, lighting, and overhead door systems, escalating only the most complex issues to the Facilities Supervisor, • Execute scheduled Preventive Maintenance (PM) tasks and help maintain accurate maintenance logs, service records, and equipment histories in compliance with repair station requirements, • Diagnose and troubleshoot mechanical, electrical, and pneumatic/hydraulic issues on industrial equipment and aviation ground support equipment, • Assist in coordinating third-party vendors and contractors for specialized inspections, certifications, and repairs, • Perform general building maintenance including carpentry, painting, minor structural repairs, and groundskeeping/snow removal as needed, • Conduct routine facility and safety inspections, identify hazards or worn components, and proactively address or report them, • Support the cleanliness and organization of the facility, including production floor, offices, break rooms, restrooms, and grounds, • Help ensure fire and life-safety systems are functioning correctly and are tested/documented on schedule, • Operate company vehicles and material handling equipment (e.g., forklift) to move tools, parts, and supplies between areas or job sites, • Maintain compliance with FAA Part 145 repair station requirements, OSHA regulations, EPA standards, and applicable building codes, • Respond to maintenance requests from building occupants and prioritize/resolve issues promptly Experience and Skills • 2–5 years of experience in building/facilities maintenance, industrial maintenance, or a related mechanical/electrical trade; aviation, manufacturing, or regulated-facility experience preferred, • Working knowledge of HVAC, electrical, and plumbing systems, with demonstrated ability to independently troubleshoot and repair common issues, • Some exposure to industrial equipment such as compressed air systems, generators, or pneumatic/hydraulic equipment preferred, • Comfortable using hand and power tools safely and effectively, with strong mechanical aptitude and problem-solving skills, • Ability to work independently on assigned tasks while collaborating with the Facilities Supervisor on larger projects, • Strong communication and customer service skills when responding to occupant requests, • Ability to pass a pre-employment and random drug and alcohol screening as well as a background check Physical Requirements • Ability to lift at least 50 pounds, • Comfortable working at heights on ladders and lifts, and in confined spaces, outdoor environments, and varying temperatures, • Manual dexterity and ability to constantly manipulate small to medium components, • Ability to stand, walk, bend, and climb stairs for extended periods, • Frequent use of hand tools, power tools, and cleaning/lubricating/painting chemicals Education / Licenses / Certifications • High school diploma or GED required; trade school training or an associate degree in a mechanical, electrical, or facilities-related discipline preferred, • Valid state driver's license with a clean driving record required, • Forklift certification preferred, or ability to obtain within 30 days of hire, • OSHA 10-Hour (or higher) General Industry certification preferred, or willingness to obtain Compensation and Benefits • Full-time, hourly position: $28–$34 per hour, commensurate with experience, skills, and certifications, • This range reflects a mid-level role positioned between our entry-level Facilities Technician/Driver and our Facilities Supervisor, based on current Long Island / Hauppauge, NY market data for facilities and building maintenance technicians, • Medical, dental, vision, and life insurance options, • 401(k) with 100% match on the first 4%, • Paid holidays, vacation, and sick/personal leave accrued from date of hire, • Training/education budget, gym reimbursement, complimentary drinks, company events, and philanthropy opportunities

Job Description Manufacturing Technician Starting at $17.50/hr. | Full-Time We are looking for a dependable, hands-on teammate to join our glass tempering production team. This role is a good fit for someone with manufacturing, production, construction, warehouse, equipment, or other physical work experience who takes pride in doing the job right. Glass experience is not required. We will train the right person on our equipment, process, paperwork, and quality standards. What we need from day one is reliability, attention to detail, urgency, and the willingness to stay productive without someone standing over your shoulder. This is a physical, fast-moving production environment. Successful teammates learn the machine, understand the process, prepare for the next order, notice quality concerns, and help keep the area moving. Over time, this role develops into a skilled production position involving machine operation, setup, adjustments, process knowledge, and support with equipment care. This role may be a good fit if you: • Show up on time and take attendance seriously., • Like hands-on work and staying busy., • Take pride in quality and accuracy., • Can follow paperwork, measurements, and production instructions., • Notice when something looks wrong and speak up., • Want to learn equipment, machines, and production processes., • Can work without needing constant reminders., • Are comfortable with physical work in a manufacturing environment., • Want a long-term opportunity with growth and pay progression. This role is probably not a good fit if you: • Prefer a job where you wait for someone to tell you every next step., • Are not comfortable with physical production work., • Struggle with consistent attendance or being on time., • Do not like repetitive work, quality checks, or following detailed instructions., • Prefer a slower-paced role without production expectations., • Are looking for a position where downtime means standing around. Responsibilities include: • Moving and handling glass safely through the tempering process., • Operating and monitoring production equipment., • Reading work orders, measurements, and production requirements., • Performing quality checks throughout the process., • Preparing materials and staging upcoming work., • Keeping the work area clean, organized, and production ready., • Reporting safety, quality, paperwork, or equipment concerns., • Learning machine setup, adjustments, troubleshooting, and basic equipment care over time. Qualifications: • Prior hands-on work experience in manufacturing, production, construction, warehouse, logistics, equipment operation, or a similar environment preferred., • Strong attendance and reliability required., • Ability to work at a steady production pace., • Mechanical aptitude or interest in learning equipment operation preferred., • Ability to read a tape measure., • Ability to lift up to 75 lbs. and stand, bend, reach, push, pull, and move throughout the shift., • Positive attitude, team mindset, and willingness to learn. Benefits: • 401(k), • 401(k) matching, • Health insurance, • Dental insurance, • Vision insurance, • Paid time off Work Location: On-site - Ronkonkoma, NY | Monday to Friday | Weekends as needed We are looking for teammates who want to build skills, grow with the company, and take pride in their work.

Job DescriptionDescription: Position Summary Are you a skilled mechanic or technician looking for an exciting opportunity in the pharmaceutical industry? Join our team and play a key role in keeping our state-of-the-art manufacturing and packaging equipment running at peak performance. You’ll work hands-on with advanced machinery, help maintain facility upgrades, and be part of a collaborative team that produces critical healthcare products. Job Type: Full-Time Location: Hauppauge, NY Works Hours: Monday – Friday, 8:00AM – 4:30PM; 4:30PM - 1:00AM Pay Range: $24.00 - $40.00 per hour, depending on experience and shift Start Date: ASAP What Makes This Role Exciting • Work on high-tech, industrial-level equipment in a regulated pharmaceutical environment., • Be part of a team that produces products impacting consumer health and well-being., • Opportunity to troubleshoot and solve complex mechanical and electrical challenges., • Hands-on experience with cutting-edge machinery and automation systems., • Career growth potential in a company that values skill development and cross-training. Why Join CPC? At CPC, you’ll be part of a team that has set the standard in pharmaceutical development and contract manufacturing since 1971, helping bring high-quality OTC, dietary supplement, and prescription products to market faster and safer than ever. We pride ourselves on quality as a core value, innovative problem-solving, and a collaborative culture where everyone plays a role in advancing formulation and manufacturing excellence. CPC offers an inclusive, respectful workplace with opportunities to grow your skills and career while working with cutting-edge technologies and serving leading global brands. With a commitment to employee success, competitive benefits, and a culture built on teamwork and integrity, CPC is a place where your contributions truly make an impact. Requirements: Responsibilities In this role, you will: • Perform repairs, overhauls, and preventive maintenance on manufacturing and packaging equipment with minimal supervision., • Troubleshoot and diagnose mechanical and electrical issues efficiently., • Respond to emergency or unscheduled repairs to keep production running smoothly., • Maintain and upgrade facility equipment as required., • Safely use a variety of hand and power tools., • Document maintenance work and maintain equipment for optimal performance., • Assist in compiling operating instructions or standard procedures for equipment., • Support the team and take on additional responsibilities as assigned. Education and Experience • High school diploma or GED required; trade school or college coursework preferred., • Minimum 2 years of hands-on experience with MIG/TIG welding, mills, turning machinery, or other industrial equipment., • Experience in pharmaceutical manufacturing or packaging is a plus. Skills, Knowledge, and Abilities: • Ability to read and interpret electrical schematics and mechanical diagrams., • Familiarity with PLCs (Programmable Logic Controllers) and VFDs (Variable Frequency Drives)., • Strong attention to detail and commitment to quality., • Ability to work independently or as part of a team., • Knowledge of company SOPs, GMPs, and safety guidelines., • Understanding of industrial production systems and machinery operations.

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Opportunity for advancement, • Paid time off, • Training & development About the Role: All Custom Closets Corporation is looking for a skilled Manufacturing Technician to join our growing team in Bay Shore, NY! This is a hands-on opportunity to be part of a craft-driven environment where precision and quality come together to create beautiful, custom storage solutions. If you love working with your hands and take pride in a job well done, we want to hear from you! Responsibilities: • Operate and maintain manufacturing equipment used in the production of custom closet components, • Cut, shape, and assemble wood, laminate, and other materials according to job specifications, • Read and interpret production orders, blueprints, and technical drawings, • Perform quality control checks to ensure finished products meet company standards, • Maintain a clean, organized, and safe work environment in compliance with safety protocols, • Troubleshoot minor equipment issues and escalate maintenance needs as required, • Collaborate with production team members to meet daily output and delivery goalsRequirements:, • Prior experience in manufacturing, woodworking, cabinetry, or a related trade preferred, • Ability to operate power tools, saws, and CNC or panel processing equipment, • Strong attention to detail and commitment to producing high-quality work, • Ability to read basic blueprints, schematics, or cut sheets, • Physical ability to stand for extended periods and lift up to 50 lbs, • Reliable, punctual, and a strong team player with a positive attitude, • High school diploma or GED equivalent required, • Must have a valid Drivers License About Us: All Custom Closets Corporation has been transforming homes and spaces across the Bay Shore, NY area with premium, made-to-order storage solutions tailored to every customer's unique needs. Our customers love us for our craftsmanship, attention to detail, and personalized service — and our employees love us for our supportive team culture and the pride that comes with building something truly custom. Come be part of a company where your skills and hard work truly make a difference!

Job Description iRocket is developing reusable, fully autonomous small launch vehicles to deliver more frequent, lower-cost access to space. We work across propulsion, structures, integration, and test domains, building toward an era of responsive launch systems. The Role: We are seeking a Manufacturing Technician to support the fabrication, assembly, and integration of structural and mechanical subassemblies for our rocket hardware. You’ll work closely with manufacturing and quality engineers to build reliable flight hardware in line with strict aerospace standards. • Manufacture and assemble flight hardware using methods such as drilling, fastening, bonding, and other mechanical processes, • Use precision calibrated tools (e.g. torque wrenches, micrometers, calipers), • Read and interpret technical drawings, blueprints, and work instructions, • Follow procedures, specifications, and test instructions to ensure hardware is built to design requirements, • Collaborate with manufacturing engineers and quality personnel to develop, refine, and document work instructions, • Ensure production tasks are completed on schedule, safely, and to the required quality, • Perform other related duties as needed to support efficient operations Requirements • High school diploma, GED, or equivalent work experience, • Strong communication and collaboration skills, • Ability to interact effectively (verbal and written) with engineering, production, and quality teams, • Experience in New Product Introduction (NPI) or development environments, • Precision drilling experience (tolerance ~ ±0.001 in), • Experience in aerospace, aviation, military, medical device, or other high-reliability industries, • Ability to read and interpret advanced technical drawings, manuals, and reports, • Proficient use of precision measuring instruments, • Experience working in cleanroom or controlled environments, • Familiarity with forklifts, cranes, or heavy equipment Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Pay Range: $23 - $27 / Hourly 2nd Shift Work Schedule: Sunday - Thursday 8:30pm - 5:30am We're looking for Autobody Technicians with a minimum of 1 year of professional experience in wheel/rim repair to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Automotive Wheel Repair Technician, you'll be expected to repair deep wheel damage, use a wheel repair machine, and paint and clear-coat wheels. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Pay Range: $23 - $27 / Houlry 2nd Shift Work Schedule: Sunday - Thursday 8:30pm - 5:30am We're looking for Airbrush Technicians with a minimum of 1 year of professional automotive painting experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Airbrush Technician, you'll be expected to color-match, mix paint, and airbrush vehicles. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, Monday through Friday, between 6 AM and 4 PM MST (9AM to 7PM ET). Not a match for this role? We have a variety of paint roles available, depending on your experience - look below to see other roles available to help us get our low-mileage, late-model cars ready for our customers: • Paint Prepper (min 6 months professional experience): prepare vehicles for cosmetic paintwork, including sanding, masking, taping, bagging, unbagging/tear down, and buffing, • Entry-Level Painter (min 1 year professional experience): prime vehicles and perform final sanding before the vehicle is painted, along with buffing, touch-up, paint mixing, and airbrush., • Mid-Level Painter (min 3 years professional experience): match/mix paint color and use water-based paint to paint the vehicle inside our paint booths, • Experienced Painter (min 5 years professional experience): painting (base coats, tri-coats, solid, metallic, and clear coats), blending adjacent panels, and paint correcting vehicles. We also have a variety of other automotive roles available in one of our 17 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: LOF (Lube, Oil, and Filter), Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Lot Attendant), Photobooth, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Pay Range: $22 - $24 / Hourly 2nd Shift Schedule: Sunday - Thursday 8:30pm - 5:30am We're looking for Auto Body Preppers with a minimum of 6 months of professional automotive prepping experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Entry-level Auto Body Repair Technician, you'll be expected to prep vehicles for paint, including sanding, masking, taping, bagging, unbagging/tear down, and buffing. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 690-7853, Monday through Friday, between 6 AM and 4 PM PT (9AM to 7PM ET). Not a match for this role? We have a variety of paint roles available, depending on your experience - look below to see other roles available to help us get our low-mileage, late-model cars ready for our customers: • Paint Prepper (min 6 months professional experience): prepare vehicles for cosmetic paintwork, including sanding, masking, taping, bagging, unbagging/tear down, and buffing, • Entry-Level Painter (min 1 year professional experience): prime vehicles and perform final sanding before the vehicle is painted, along with buffing, touch-up, paint mixing, and airbrush., • Mid-Level Painter (min 3 years professional experience): match/mix paint color and use water-based paint to paint the vehicle inside our paint booths, • Experienced Painter (min 5 years professional experience): painting (base coats, tri-coats, solid, metallic, and clear coats), blending adjacent panels, and paint correcting vehicles. We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job DescriptionAuto Body Technician / Collision Repair Technician Ronkonkoma, NY | OEM-Certified, I-CAR Gold Class Collision Repair Facility We are a professional, OEM-certified collision repair organization built on pride in our craft, strong teamwork, and shared accountability. Our body technicians are the backbone of repair quality — the work done here sets everything else up for success. Body techs, painters, estimators, parts, and the front office work closely together, sharing knowledge and holding one another to a high standard. We support the work, not shortcuts, and we take pride in doing repairs the right way. We’re looking for an Auto Body Technician who values craftsmanship, consistency, and being part of a well-run, team-focused shop. Role Overview This role is responsible for structural and non-structural body repairs, following OEM procedures and shop standards in a production-focused environment with strong repair planning and support. What You’ll Do Perform structural and non-structural body repairs Disassemble and reassemble vehicles properly and safely Perform panel replacement, straightening, and metal repair Follow OEM repair procedures and documentation requirements Use proper repair methods, measuring systems, and equipment Communicate with production and estimators on repair needs Maintain clean, organized work areas Take pride in repair quality and final fit & finish What We’re Looking For Prior experience as an auto body / collision repair technician Strong understanding of OEM repair procedures Ability to maintain quality under production volume Attention to detail and pride in workmanship Team-oriented mindset and professionalism I-CAR training and OEM certifications valued Structural repair experience a plus What Success Looks Like Here Repairs completed correctly the first time Minimal rework or comebacks Clean handoffs to paint and detail Consistent production without sacrificing quality Strong collaboration across departments Compensation — Performance Based Hourly Guarantee: Competitive base hourly rate Flat-Rate Pay: Earn flat-rate flag hours above 40 hours/week Skill tiering applies based on experience and capability Quality and chargeback standards are clearly defined This structure provides stability with real upside for productive, quality-focused technicians. Team Incentive Compensation This role also participates in a shared, team-based incentive program tied to overall shop performance. Incentives are based on delivered shop revenue, not individual sales or written estimates The incentive pool activates once delivered revenue exceeds $225,000 per month Payouts increase as shop performance improves Incentives are shared among front-office and production-support team members Designed to reward teamwork, consistency, and execution, not shortcuts Example Monthly Incentive Outcomes (Examples shown for illustration; individual payouts vary by role and team results) ~$275,000 delivered: $300–$500 per person ~$325,000 delivered: $600–$900 per person ~$375,000+ delivered: $1,000–$1,500+ per person Incentives are paid in addition to base compensation and align individual success with overall shop performance. Who This Role Is For Experienced auto body technicians Craftsmen who take pride in correct repairs Team players who value consistency and quality Technicians seeking steady work and long-term stability Who Should Not Apply Entry-level candidates without collision repair experience Anyone unwilling to follow OEM procedures and shop standards Short-term or transitional job seekers Body Technician Skill Tiers & Flat-Rate Pay Structure Our body technicians are paid under a hybrid structure designed to provide income stability, upside for productivity, and clear advancement paths. How Pay Works (All Tiers) Hourly Guarantee: Paid for the first 40 hours per week Flat-Rate Pay: Earned on flag hours above 40 Flat-rate hours are paid only when quality standards are met Skill tier determines flat-rate multiplier and scope of work This structure rewards skill, efficiency, and correct repairs — not shortcuts. Skill Tier 1 — Body Technician I Developing / Entry-Level Tech Scope Non-structural repairs Basic disassembly / reassembly Panel repair with guidance Works under supervision Requirements Basic collision repair experience or trade school Willingness to learn OEM procedures Coachable, team-oriented mindset Pay Structure Hourly guarantee only Limited flat-rate eligibility Focus is skill development, not speed Advancement Trigger Consistent quality work Ability to complete jobs with minimal rework Demonstrates understanding of repair planning Skill Tier 2 — Body Technician II Independent Production Technician Scope Non-structural and moderate repairs Full R&I and panel replacement Reads and follows repair plans independently Coordinates with estimators and parts Requirements Proven collision repair experience Comfortable with OEM procedures Minimal supervision required Pay Structure Hourly guarantee for first 40 hours Flat-rate flag hours paid above 40 Standard flat-rate multiplier Performance Expectation Consistent quality Steady flag hours without comebacks Clean handoffs to paint Skill Tier 3 — Body Technician III Senior / Structural Technician Scope Structural and complex repairs Sectioning, measuring, and advanced metal work Mentor junior technicians Quality authority on the floor Requirements Strong OEM structural repair knowledge Measuring system experience I-CAR training strongly preferred Pay Structure Hourly guarantee for first 40 hours Enhanced flat-rate multiplier on flag hours above 40 Priority access to complex / high-skill jobs Performance Expectation Minimal to zero comebacks High efficiency without sacrificing quality Leadership through example Skill Tier 4 — Lead Body Technician Shop Anchor / Technical Leader Scope Most complex structural repairs Oversight of repair quality Assists with repair strategy and problem-solving Informal mentorship role Requirements Platinum-level habits Deep OEM procedure knowledge Trusted by management and peers Pay Structure Hourly guarantee for first 40 hours Top-tier flat-rate multiplier Eligible for additional leadership incentives (where applicable) Quality & Chargeback Standards Flat-rate hours are paid only on repairs completed to shop and OEM standards Rework due to workmanship may result in: Chargeback of affected flag hours Temporary tier review if recurring Expectations are clear and applied consistently Advancement & Reviews Skill tier reviews occur periodically, not annually by default Advancement is based on: Quality Consistency Independence Team contribution Time served does not guarantee tier movement — performance does

Job Description We're looking for Autobody Preppers with a minimum of 5 years of professional automotive bodywork experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Heavy Body Technician, you'll be expected to train other autobody technicians and perform extensive bodywork on multiple panels, including: • Heavy plastic welding/stapling, • Heavy metal pulling, straightening, shrinking, and stud welding, • Roof and rocker panel repair Large area, heavy bodywork (including Bondo repair) At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: Pay Range: $33 - $41 Hourly We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 690-7853, Monday through Friday, between 6 AM and 4 PM PT (9AM to 7PM ET). Not a match for this role? We have a variety of prep roles available, depending on your experience - look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Prepper (min 1 year professional experience): perform light bodywork, including prepping, sanding, and buffing vehicles, removing and installing bumpers, single panel repair (including Bondo repair), and minor plastic welding, • Mid-Level Prepper (min 3-5 years professional experience): perform bodywork on multiple panels, including heavy plastic welding, minor metal pulling, roof and rocker panel repair, stud welding, and large area heavy bodywork (including Bondo repair), • Experienced Prepper (min 5 years professional experience): train other autobody technicians and perform extensive bodywork on multiple panels, including plastic welding, metal pulling, roof and rocker panel repair, and stud welding We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Pay Range: $33 - $43 / Hourly 2nd Shift Work Schedule: Sunday - Thursday 8:30pm - 5:30am We're looking for paintless dent repair technicians with a minimum of 5 years of professional automotive PDR experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history, and one of the four fastest companies to make the Fortune 500. As an Experienced PDR Technician, you'll be expected to use advanced glue-pulling techniques, hail repair, repair creases and body lines, and repair larger-sized dents on both steel and aluminum vehicle panels. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Pay Range: $26 - $35 / Hourly 2nd Shift Work Schedule: Sunday - Thursday 8:30pm - 5:30am We're looking for Auto Painters with a minimum of 3 years of professional automotive painting experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As a Mid-Level Painter, you'll be expected to match/mix paint color and use water-based paint to paint the vehicle inside our paint booths. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page Not a match for this role? We have a variety of paint roles available, depending on your experience - look below to see other roles available to help us get our low-mileage, late-model cars ready for our customers: • Paint Prepper (min 6 months professional experience): prepare vehicles for cosmetic paintwork, including sanding, masking, taping, bagging, unbagging/tear down, and buffing, • Entry-Level Painter (min 1 year professional experience): prime vehicles and perform final sanding before the vehicle is painted, along with buffing, touch-up, paint mixing, and airbrush., • Mid-Level Painter (min 3 years professional experience): match/mix paint color and use water-based paint to paint the vehicle inside our paint booths, • Experienced Painter (min 5 years professional experience): painting (base coats, tri-coats, solid, metallic, and clear coats), blending adjacent panels, and paint correcting vehicles. We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Pay Range: $33 - $41 / Hourly 2nd Shift Work Schedule: Sunday - Thursday 8:30pm - 5:30am We're looking for Auto Painters with a minimum of 5 years of professional automotive painting experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Painter, you'll be expected to be highly skilled in painting (base coats, tri-coats, solid, metallic, and clear coats), blending adjacent panels, and paint correcting vehicles. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 690-7853, Monday through Friday, between 6 AM and 4 PM PT (9AM to 7PM ET). Not a match for this role? We have a variety of paint roles available, depending on your experience - look below to see other roles available to help us get our low-mileage, late-model cars ready for our customers: • Paint Prepper (min 6 months professional experience): prepare vehicles for cosmetic paintwork, including sanding, masking, taping, bagging, unbagging/tear down, and buffing, • Entry-Level Painter (min 1 year professional experience): prime vehicles and perform final sanding before the vehicle is painted, along with buffing, touch-up, paint mixing, and airbrush., • Mid-Level Painter (min 3 years professional experience): match/mix paint color and use water-based paint to paint the vehicle inside our paint booths, • Experienced Painter (min 5 years professional experience): painting (base coats, tri-coats, solid, metallic, and clear coats), blending adjacent panels, and paint correcting vehicles. We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in more than 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all essential functions, duties, or skills required for this role. Management retains the discretion to add or change the duties at any time. We are seeking a highly skilled Senior Engineering Technician to join our Operations team in a fast-paced RF and Microwave manufacturing environment. This hands-on role is ideal for an experienced technician with a strong background in testing, tuning, troubleshooting, and manufacturing advanced RF products. The successful candidate will support the production of RF, microwave, millimeter-wave, and frequency conversion products, ranging from discrete components through integrated subsystems. Working closely with Design Engineering, Manufacturing Engineering, Quality, and Operations, this individual will play a key role in solving complex technical challenges, supporting new product introduction, improving manufacturing processes, and ensuring the successful delivery of high-performance products. The ideal candidate is technically strong, enjoys solving difficult RF problems, thrives in a collaborative environment, and continuously looks for opportunities to improve product quality, manufacturing performance, and operational efficiency. Essential Functions: Technical Responsibilities • Test, tune, troubleshoot, characterize, and validate RF, microwave, millimeter-wave, and frequency conversion products from discrete components through fully integrated subsystems., • Perform RF and microwave characterization, tuning, troubleshooting, and acceptance testing using advanced RF test instrumentation, including PNA/PNA-X network analyzers, spectrum analyzers, signal generators, oscilloscopes, power meters, noise figure analyzers, RF sources, and automated test systems., • Diagnose complex RF performance issues, analyze test data, and determine root causes using sound engineering principles and measurement techniques., • Perform electrical alignment and optimization of RF assemblies to meet product performance specifications., • Read and interpret engineering drawings, schematics, wiring diagrams, specifications, and manufacturing documentation., • Perform precision assembly and troubleshooting using microscopes and miniature hand tools. Engineering & Product Development • Partner with Design and Manufacturing Engineering to support prototype builds, First Article Inspection, New Product Introduction, and production readiness., • Support engineering investigations by recommending design, test, or manufacturing improvements that enhance product performance, manufacturability, reliability, and quality., • Develop and improve manufacturing fixtures, test methods, and standardized work instructions to increase repeatability and production efficiency. Manufacturing Excellence • Drive Lean Manufacturing and Continuous Improvement initiatives focused on improving first-pass yield, reducing cycle time, increasing throughput, and eliminating waste., • Support root cause investigations and corrective actions for manufacturing and customer-return issues., • Work across multiple manufacturing departments to resolve technical challenges and support production priorities while maintaining the highest standards of quality and safety. Technical Leadership • Mentor and support junior technicians by providing technical guidance on new products, manufacturing processes, RF test equipment, troubleshooting techniques, and best manufacturing practices., • Maintain accurate manufacturing records, test documentation, and production data in accordance with company procedures and quality standards. Qualifications • High School Diploma or equivalent with 8+ years of related experience, or an Associate's Degree in Electronics, Electrical Engineering Technology, or a related technical discipline with 4+ years of relevant experience., • Extensive experience testing, tuning, troubleshooting, and characterizing RF, microwave, millimeter-wave, or frequency conversion products., • Strong understanding of RF and microwave theory, measurements, and applications., • Experience troubleshooting RF hardware from discrete component level through integrated subsystem level., • Proficiency in using advanced RF test equipment, • Ability to analyze RF test results and determine the root cause of electrical performance issues., • Ability to read and interpret engineering drawings, electrical schematics, and manufacturing documentation., • Strong analytical, troubleshooting, and problem-solving skills., • Excellent manual dexterity and experience working under a microscope with miniature RF components., • Strong communication skills with the ability to collaborate effectively across Engineering, Manufacturing, Quality, Planning, and Operations., • Experience supporting New Product Introduction and transitioning products into production., • Experience in aerospace, defense, or other high-reliability manufacturing environments., • Working knowledge of Lean Manufacturing, Continuous Improvement, Kaizen, Root Cause Analysis, or Six Sigma methodologies., • Experience identifying and implementing process improvements that improve quality, manufacturing efficiency, and throughput., • Familiarity with ERP/MRP systems and manufacturing documentation., • Active Secret Clearance or the ability to obtain and maintain one. Please be aware that many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to maintaining a workplace that is inclusive, respectful, and free from discrimination, where all employees and applicants are treated with dignity and fairness. Employment decisions are made in accordance with applicable federal, state, and local laws. All qualified applicants receive equal consideration without regard to race, color, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender identity or expression, age, national origin, marital status, citizenship status, disability, protected veteran status, or any other characteristic protected by law. Narda-MITEQ complies with applicable Executive Orders, including affirmative action requirements for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and conducts pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at denise.nocerino@nardamiteq.com. Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job Description LONG ISLAND’S LARGEST CADILLAC, BUICK & GMC DEALER -- A rare opportunity to work at the #1 dealership! King O’Rourke Cadillac, Buick, GMC located on Rte. 347 Smithtown, NY is seeking to hire more Mobile Service Technicians for our NEW Mobile Service+ Department. GM Experience preferred. You will join our MS+ team and help pioneer this new department in a very successful facility with brand-new Mobile Service+ & Roadside Vehicles. Full-time position available in our Award-Winning Service Department. We have a high-volume family-owned shop with almost 50 years in the business & offer the BEST PAY PLAN ON LONG ISLAND! WE BELIEVE OUR EMPLOYEES ARE OUR GREATEST ASSET - As such, we treat all employees with respect and appreciation for their contributions to the company. We believe not only in providing ongoing training, but also rewarding outstanding effort and results through bonus and commission programs. View our Careers Page here to see what it's like to work at King O'Rourke Auto Group! Benefits: • Great earning opportunities., • Full benefits, • 401k with matched dollars, • Quarterly bonuses available, • Company discounts, • & more. Requirements: • Must present valid driver’s license, • Diesel Technician desirable, • ASE certification desirable, • Excellent customer service, • Strong communication skills, • Valid Driver’s License, • GM Training and transmission experience a plus, • DOT medical clearance a plus, • 18+ years of age or older to comply with the company driving policy Responsibilities: • Performing vehicle repair and/or maintenance work outside the shop as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards to drive Customer loyalty., • Communicating with Parts Department and Service Advisors regularly to effectively manage production and Customer communication., • Diagnosing the cause of any malfunction and perform repair., • Adequately explains technical diagnoses and needed repairs to non-mechanical individuals which may include employees and customers, • Keeping abreast of factory technical bulletins and participating in factory-sponsored training classes as appropriate, • Keeps store management aware of mechanical repair problems as they occur, • Maintains an organized work area Pay: $24-$48 per hour depending on experience We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. For further information on this opportunity, please call our GM Jim Pflumm at 631-724-4700 (EXT. 121) or apply online.

Job Description Benefits Start Day 1 for Full-Time Colleagues - No Waiting Period! For more information about our benefits, see below! We are proud to be a member of the Rentokil family of companies, the global leader in Pest Control and other services across more than 90 countries. We pride ourselves on being a trusted partner to many of the world's leading brands and serve consumer and business customers across multiple industries. We are extremely proud of our legacy of excellence and constantly work to fulfill our mission to "protect people, enhance lives, and preserve the planet." What do our Termite Technicians do? Termite Technicians use their expertise to play a role in protecting customers properties from wood destroying organisms. As a Termite Technician you are the first line of defense in preserving and safeguarding customers' properties. The inspections, prevention, and treatment services that you provide will create peace of mind and comfort for our customers. Responsibilities include but are not limited to the following: • Identify customer’s termite problems and have knowledge of termite behaviors and habits to determine remedial steps, • Perform termite treatment services safely and according to company guidelines and standard practices, • Applying anti-termite treatments to structures according to schedule, safety procedures and label instructions., • Communicate to the customer critical conditions that are conducive to termite activity discuss procedures and structural modifications, which may be supplemental to treatment process, • Verifying that job specifications are appropriate for each work order, • Operate and maintain service vehicles and equipment, • Completing production forms documenting services provided, • Interacting with customers and explaining services provided Essential Job Functions: • Tolerate a variety of environmental conditions, including seasonal weather, damp and/or dusty locations, • Prepare the job site for treatment, • Enter and exit structures and crawl spaces; climb over and on top of structures; ascend and descend stairs and ladders, • You need to be comfortable working 20 feet up on a ladder along with working in small confined spaces., • General laborer, carpentry, cement, roofing, gutter and attic experience is plus, • Ability to work on a roofs and high areas, • Lots of moving around — regularly sitting, climbing, balancing, stooping, kneeling, crouching, and crawling, up and down stairs, ladders, scaffolding, ramps, and poles, • You’ll need to wear personal protective equipment (PPE), like an OSHA-compliant respirator, and you’ll need to be okay with regularly working in confined spaces, narrow aisles, or passageways (anywhere the critters live) What do you need? • Clean shaven face- for safety reasons (rebreathers have to be able to seal your face), • High school diploma or GED, • At least 1 years of customer service, experience in termite control is a plus, • Strong attention to detail and willingness to learn, • Be flexible with working hours, Monday-Friday and Saturdays as needed, • Licenses/certificates as required by federal, state, and/or local regulations (covered by us), • Basic math skills — add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. You’ll need to be able to follow instructions for mixing on product labels. #ZipRTX Base Pay RangeHourly: $20.00 - $23.00 While starting pay falls within the given range, it can vary based on factors like geographic location, skills, education, and experience. Total earnings may also be affected by overtime, incentives, commissions, performance, and route assignment (where applicable). Why Choose Us? A career with the Rentokil family of companies can be a professional trajectory filled with opportunity. We pride ourselves on being a world-class team that rewards high performance, and we love to promote from within. We offer competitive pay and many of our roles offer performance incentives. Below you'll find information about some of what we have to offer. All Full-Time Colleagues qualify for the following and Part-Time Colleagues qualify for most benefits after they meet certain criteria. Click here to read more about our Total Rewards Program which includes: Professional and Personal Growth Multiple avenues to grow your career Training and development programs available Tuition Reimbursement benefits (for FT Colleagues) Health and Wellness Full-time colleagues are eligible to begin enrollment immediately upon hire with benefits starting on day 1 Health benefits including Medical, Dental, Vision, Disability, and Life Insurance plus much more Savings and Retirement 401(k) retirement plan with company-matching contributions Work-Life Balance Vacation days & sick days Company-paid holidays & floating holidays A company mindset that prioritizes health, safety, and flexibility We are looking for individuals who want to make a difference where our customers live and work. Is that you? This company is a Drug Free workplace. Rentokil is committed to complying with all Federal, State, and local laws related to the employment of qualified individuals with disabilities. California residents click here to review your privacy rights. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying to this job, you agree to receive initial texts from systems used on behalf of Rentokil North America, Inc., possibly including Workday, Loop, and HireVue. These systems utilize text messages to communicate with you throughout the application, interview, and pre-hire processes. You can set your communication preferences or opt out of text messages from each system at any time following the initial message. Message and data rates may apply. \nCompany Description For more than 90 years, we’ve protected what's most valuable to you, with local specialists who go above and beyond to fix your problem and services designed to make your life easier, 365 days a year. So when you trust Terminix to nix your pest problem, it's not just a promise. It's a guarantee. For more than 90 years, we’ve protected what's most valuable to you, with local specialists who go above and beyond to fix your problem and services designed to make your life easier, 365 days a year. So when you trust Terminix to nix your pest problem, it's not just a promise. It's a guarantee.

Job DescriptionDescription: Are you passionate about science and precision? Join our Quality Control team as a Laboratory Technician and gain hands-on experience performing chemical and microbial testing for raw materials and finished products in a regulated, GMP-compliant environment. This is an opportunity to develop your technical expertise, learn from experienced professionals, and contribute directly to ensuring the quality and safety of products that reach consumers. Position Summary: The Laboratory Technician is responsible for performing basic chemical and/or microbial analysis for one of the assigned QC laboratories (Raw Material, Finished Product, Microbiology, Technical Support) which is responsible for the analysis and disposition of commercial materials (raw materials, finished product release, stability, validation, investigation), and environmental samples, as assigned, documenting results, and maintaining laboratory supplies, chemicals, and logbooks in accordance with SOPs. • Job Type: Full-Time, • Location: Hauppauge, NY, • Works Hours: Monday – Friday, 7:30AM – 3:30PM EST, • Pay Range: $23 per hour, • Start Date: ASAP Responsibilities: include, but are not limited to: • Follow all laboratory SOPs, including but not limited to laboratory safety, chemical handling and storage, gowning, equipment use, cGMP, GDP, data integrity, DEA requirements, etc., • Log in and track all samples received in the lab for testing and release., • Perform laboratory physical chemistry testing (ie. weighing, particle size analysis, LOD, Halogen Moisture Analysis, Moisture Content/KF, Water Activity, etc.), identification testing (ie. FTIR, UV-VIS, TLC) and wet chemistry testing (ie. ICP-OES/MS, DT, titrations, pH, dissolution media/stock sample preparation, laboratory solution preparation and standardization, etc.), as assigned, in accordance with the prescribed approved analytical test method., • Perform sampling, plating, and testing of product assigned for microbiology analysis along with media preparation, sterilization and storage, etc., as assigned in accordance with the prescribed approved test method., • Maintain proper labeling of chemical reagents., • Maintain a clean and organized laboratory working environment., • Assist in laboratory investigations, as assigned., • Dispose of used/expired/excess chemicals, solutions, solvents, etc. in dedicated waste receptacles., • Report well-written, accurate and timely results., • Review data, calculations, notebooks, and reports., • Perform routine Metrology functions, including instrument cleaning/preventive maintenance/ calibration/verification activities., • Monitor and assist with maintaining proper inventory levels of all laboratory supplies., • Assist with sample receiving, chemical inventory, document filing, housekeeping, etc., • Responsible for compliance with all rules and regulations pertaining to safety policies with the proper attitude toward safety and health, helping to ensure that all department operations are performed with the utmost regard for the safety and health for all personnel., • Other responsibilities as assigned by Management.Requirements: Education and Experience: • Associate’s degree or relevant work experience required; Bachelor’s degree preferred. Skills, Knowledge, and Abilities: • Knowledge of laboratory chemistry or microbiology, and cGMPs., • Proficient in Microsoft Word, Excel, graphs/charts and databases., • Able to multitask and meet tight deadlines., • Excellent organizational skills with attention to detail. Physical Demands: • Required to sit and stand for long periods of time., • Frequently reaching with arms/hands up to 2 feet., • Good hand eye coordination., • Occasionally required to walk and kneel., • Must be able to lift and/or move up to 50 pounds., • Must be able to use close vision, distance vision, peripheral vision, color vision and the ability to adjust focus., • Required to reach with arms and use hands and fingers to handle or feel objects, tools and computer controls., • Required to stoop, kneel, crouch, stand, bend, sit, talk, hear, climb stairs. Work Environment: • Work environment in laboratory and production operations facilities include close proximity to heavy machinery and pharmaceutical powders., • Potential to move between production operations sites/areas to complete job functions; regular, ongoing travel throughout geographic areas on a continual basis as normal scope of role requiring use of personal vehicle., • Employee work hours/schedule and/or shift are subject to change based on business needs and Management discretion., • Required to be present in the laboratory to perform daily testing and collaborate with department director, manager, and peers. Supervisory Responsibilities: • None Personal Protective Equipment or Attire Required for Position: • Gowning as required by GMPs and/or SOPs

Job Description Automotive Technician / Auto Mechanic – ASE Technician – All Levels Huntington Volvo – VIP Automotive Group Huntington, NY $18 – $45+ Per Hour | 45+ Hours Available | Full-Time | 5-Day Work Week ???? NOW HIRING: AUTOMOTIVE TECHNICIANS – ALL EXPERIENCE LEVELS Huntington Volvo is hiring Automotive Technicians, Auto Mechanics, ASE Technicians, and Automotive Mechanics at all experience levels. Whether you're an Entry-Level Technician, C-Level Technician, B-Level Technician, A-Level Technician, Master Technician, or experienced Auto Mechanic, we want to hear from you! $18 – $45+ per hour depending on experience with 45+ hours available, production bonus opportunities, union benefits, paid training, and opportunities for career advancement. Join Huntington Volvo, part of the VIP Automotive Group, and build your career with a respected automotive dealership group. Our modern, climate-controlled service facility provides technicians with the tools, training, and management support needed to succeed. ???? WHY JOIN OUR SERVICE TEAM? $18 – $45+ per hour based on experience and skill level 45+ hours available every week Full-Time, 5-Day Work Week Weekly production bonus opportunities Union benefits package including health, dental, pension & vacation Paid ASE certification Paid Volvo manufacturer training Modern, climate-controlled service facility Tool relocation assistance available Employee discounts on vehicles, parts & service Consistent work and strong earning potential Career advancement opportunities within VIP Automotive Group Supportive service management team Opportunity to work with a premium automotive brand ???? AUTOMOTIVE TECHNICIAN RESPONSIBILITIES Depending on experience and skill level, Automotive Technicians will be responsible for: Diagnose and repair automotive mechanical and electrical systems Perform routine and preventative vehicle maintenance Perform brake repairs, tire services, oil changes, inspections, and general repairs Diagnose drivability and performance concerns Use automotive diagnostic equipment and scan tools Perform electrical and computer-related diagnostics Complete manufacturer-recommended repairs and maintenance Perform software updates and key programming Inspect vehicles and identify necessary repairs Accurately document repairs and complete repair orders Communicate with Service Advisors regarding vehicle concerns and repairs Work with the Parts Department to obtain necessary parts Follow manufacturer and dealership repair procedures Maintain a clean, safe, and organized service bay Maintain professional standards for quality, productivity, and customer satisfaction Assist with training and mentoring less-experienced technicians when appropriate ????️ TECHNICIANS OF ALL LEVELS ARE ENCOURAGED TO APPLY We're looking for technicians who want to work, learn, earn, and build a long-term automotive career. Entry-Level / Apprentice Technicians: Great opportunity to develop your automotive repair skills through hands-on experience and paid manufacturer training. C-Level / Mid-Level Technicians: Take the next step with consistent work, strong earning potential, training, and advancement opportunities. B-Level / Advanced Technicians: Utilize your diagnostic and repair expertise in a professional dealership service environment. Master Technicians/A - Level: Bring your advanced diagnostic and repair experience and help support a high-performing service team. ✅ QUALIFICATIONS Previous experience as an Automotive Technician, Auto Mechanic, Automotive Mechanic, or Service Technician Dealership experience preferred but not required ASE certifications are a plus ASE certification assistance available Volvo or European automotive experience preferred Strong mechanical and diagnostic skills Ability to diagnose and repair automotive systems Ability to work efficiently in a fast-paced service environment Strong attention to detail and quality workmanship Professional attitude and strong work ethic Valid driver's license required We welcome technicians from independent repair shops, automotive service centers, dealerships, and other automotive backgrounds. ???? WHY HUNTINGTON VOLVO? At Huntington Volvo, you're not just filling a technician position — you're joining a team that supports long-term automotive careers. As part of VIP Automotive Group, you'll have access to ongoing training, career development, employee benefits, and opportunities to advance within a growing dealership organization. Our goal is to provide our technicians with the work, training, equipment, and support needed to succeed. ???? SCHEDULE Full-Time | 5-Day Work Week 45+ Hours Available ???? LOCATION Huntington Volvo – Huntington, NY ???? READY TO ADVANCE YOUR AUTOMOTIVE CAREER? If you're an Automotive Technician, Auto Mechanic, ASE Technician, Volvo Technician, Automotive Mechanic, Service Technician, Master Technician, A-Level Technician, B-Level Technician, or Entry-Level Technician, apply today! Experienced technicians and motivated entry-level candidates are encouraged to apply. Join Huntington Volvo and VIP Automotive Group — apply today and take the next step in your automotive career!

Job Description SmartSource®, an ABCOM Technology Group company, has more than 35 years of experience serving clients' business technology needs in the events, staffing, legal, government, finance, education, entertainment, and meeting production industries. The company provides service throughout North America through its fully staffed and equipped offices in major metropolitan markets. SmartSource draws from its extensive inventory of IT, AV, and interactive technologies to deliver solutions as varied as computers for contract staff, office equipment for temporary spaces, or multi-story video walls for trade shows and events. The SmartSource team is passionate about leveraging its expertise to empower clients to excel. SmartSource will afford you an exciting career opportunity. We offer a fast-paced and dynamic work environment. Most importantly, you will be provided the support and environment to excel and succeed with an industry leading company. If you are enthusiastic, highly motivated and looking for a great opportunity, we encourage you to apply today. Job Summary: As an IT/AV Field Technician with SmartSource, your primary responsibility will be providing “top-notch” customer service with a strong focus on tradeshow and corporate meeting environments. Duties include product configuration, prep and testing, transportation of equipment, on-site installation of audio visual and computer technology, networking, troubleshooting and technical support. Responsibilities: • In-shop configuration, preparation and testing, transport for on-site installation, customer service, and troubleshooting of our computers, software, and related peripherals in tradeshow and corporate events environments., • In-shop configuration, preparation and testing, transport for on-site set up and operation of Audio and Video equipment including microphones, speakers, mixing consoles, video screens, projectors, video switchers, large displays and related peripherals in tradeshow and corporate events environments. Qualifications: • Strong IT background with expertise in configuring, networking, and troubleshooting computers, printers, and related hardware. Copier repair experience is a plus., • The ideal candidate will also be proficient at setting up and operating basic audio-visual components, be able to troubleshoot and correct operational glitches., • Must have experience with “live events” – trade shows, corporate meetings, and conferences., • Must have a “can-do" attitude, strong customer service focus, and effective communication and people interaction skills as this position interacts directly with our customers., • Requires the ability to think and work independently, meet deadlines, and have extreme attention to detail, while working as a member of a team., • Requires a valid driver’s license and the ability to drive company vehicles to area venues for client events., • Requires loading/unloading of company vehicles. Must be able to lift 50 pounds., • As our clients’ events are held seven days a week, some overtime, weekends, and overnight travel is required., • A desire to continually improve performance and take service to the next level is vital. SmartSource is an equal opportunity/affirmative action employer. SmartSource does not discriminate on the basis of race, color, religion, gender (including non-binary/third gender), transgender, gender identity or expression, sexual orientation or affectional preference, national origin, citizenship, age, disability, status as a protected veteran, military status, marital status, or status in any group or class protected by applicable federal, state, or local law. SmartSource makes reasonable accommodations for qualified individuals with disabilities in accordance with the Americans with Disabilities Act, Rehabilitation Act, and applicable state and local laws.

Job Description Pay Range: $26 - $35 / Hourly 2nd Shift Work Schedule: Sunday-Thursday 8:30pm - 5:30am We're looking for Autobody Preppers with a minimum of 3 years of professional automotive bodywork experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As a Experienced Auto Body Repair Technician, you'll be expected to perform bodywork on multiple panels, including: • Heavy plastic welding, • Minor metal pulling, • Roof and rocker panel repair, • Large area, heavy bodywork (including Bondo repair) At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page Not a match for this role? We have a variety of prep roles available, depending on your experience - look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Prepper (min 1 year professional experience): perform light bodywork, including prepping, sanding, and buffing vehicles, removing and installing bumpers, single panel repair (including Bondo repair), and minor plastic welding, • Mid-Level Prepper (min 3-5 years professional experience): perform bodywork on multiple panels, including heavy plastic welding, minor metal pulling, roof and rocker panel repair, stud welding, and large area heavy bodywork (including Bondo repair), • Experienced Prepper (min 5 years professional experience): train other autobody technicians and perform extensive bodywork on multiple panels, including plastic welding, metal pulling, roof and rocker panel repair, and stud welding We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Join ProMach and shine. Whether you're creative, strategic, persuasive, or mechanically inclined, there’s a place for you here. Be a problem-solver, a closer, a futurist - whatever drives you. At ProMach, you'll be challenged and rewarded as you help improve packaging performance and shape the future of automation. And we’ll be proud to have you on the journey. Do we have your attention? Keep reading. Modern Packaging is seeking a Quality Control Technician to perform a variety of quality control duties to determine that manufactured sub-assemblies, manufactured parts, and assembled machines are built in accordance with company design specifications and requirements. This position reports to the Production Manager. Modern Packaging is seeking a Quality Control Technician to perform a variety of quality control duties to determine that manufactured sub-assemblies, manufactured parts, and assembled machines are built in accordance with company design specifications and requirements. This position reports to the Production Manager. • Measures incoming materials by confirming specifications; conducting visual and measurement tests; rejecting and contacting supplier regarding unacceptable materials., • Approves in-process production by confirming specifications; conducting visual and measurement tests; communicating any required adjustments to production supervisor., • Approves returning internal and external products for re-work, confirming re-work., • Documents inspection results by completing reports and logs; and inputting data into an applicable MRP system., • Keeps measurement equipment operating by following operating instructions, calling for repairs., • Maintains safe and healthy work environment by following standards and procedures, complying with legal regulations., • Updates job knowledge by participating in educational opportunities; reading technical publications., • Accomplishes quality and organization mission by completing related results as needed., • Knowledge of calibration of gauges and measurement equipment as required, • Strong ability to read and interpret Cad drawings. Key Skills and Technical Requirements • Blueprint Reading: The ability to interpret complex engineering drawings, schematics, geometric dimensioning and tolerancing (GD&T), and technical specifications., • Measuring Tools: Hands-on proficiency with precision instruments like calipers, micrometers, depth gauges, and coordinate measuring machines Qualifications 3-5 years: Experience in Quality Inspection of manufactured parts. Education Preferred High School Diploma or Higher What’s in it for you? There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career. In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. Total compensation includes your salary, comprehensive medical/dental programs, as well as life insurance, a generous paid time off program, and a retirement savings plan with a company match. And because we understand the importance of feeling protected, there is no waiting period for benefits – you are eligible on your first day of employment! Please note that the pay ranges listed on external job boards, outside our posting details, do not accurately reflect our internal compensation ranges. Pro Mach, Inc. was named to the Inc. 5,000 list of the fastest growing private companies in the U.S. seven times. We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities. We have the rewards, opportunities, and the market strength of a large organization combined with the entrepreneurial culture of a small, fast-paced company. You will enjoy the benefits of working with a growing company that competes globally, with the personal touch and feel of a smaller company where you can make an impact every day. ProMach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Compensation Range: $22-28/hr #ZRMOD #INMOD

Job Description Role overview We’re hiring a Senior Machinist: CNC / GD&T / G&M Code / Setup with hands-on experience setting up and running multi-axis CNC equipment. You’ll own setups end-to-end, help prove out new programs, and support both R&D builds and short production runs. What you’ll do • Read and interpret engineering drawings, setup sheets, and related documentation; apply GD&T requirements., • Set up and operate multi-axis CNC milling and turning equipment (including mill-turn / live tooling where applicable)., • Configure workholding and fixtures (vise, soft jaws, tombstones, custom fixtures) per setup documentation and best practices., • Run, validate, and help prove out new CNC programs; support first-article / first-piece verification., • Diagnose machining issues and make minor program/parameter adjustments (feeds/speeds, offsets) during runs., • Perform in-process and final inspection using standard precision metrology tools; document results as required., • Maintain machines and work area (basic preventive care, cleanliness, chip/coolant management)., • Adapt between fast-turn prototype/R&D work and short-run production while maintaining quality and repeatability. About the team The CNC Machining team works directly with the engineering and manufacturing teams to produce precision components for propulsion and vehicle systems. About iRocket Founded in 2018, Innovative Rocket Technologies Inc. is revolutionizing the space industry as the first fully autonomous and 100% reusable rocket manufacturer. iRocket is building the world’s first reusable rocket engines with a setup focused on reusability from the beginning, including high performance and long life. We will Recondition, Reload, and Relaunch™ our rockets synonymous with how we use airplanes today for multiple daily flights in under 24 hrs. achieving reusability 2.0. Utilizing cutting-edge 3D printing and additive manufacturing technology, we’re dedicated to providing reliable and rapid access to space at a low cost. Our innovative design addresses the inefficiencies in the industry, while our proprietary reusable engine technology positions us as the leading small launch service provider. Join us on our journey to space. Requirements Required qualifications • 3+ years experience as a CNC machinist/operator and setup technician in a precision environment., • Must be proficient in G-Code and M-Code programming with the ability to troubleshoot, edit, prove out processes, perform first piece runs, and recommend changes to programs on multi-axis machine tools proficiently., • Experience with multi-axis machining (3+1 / 3+2); familiarity with complex toolpaths and 3D surfaces., • Experience with live-tooling lathes, mill-turns, or multi-task machines., • Working knowledge of machining a range of materials (e.g., aluminum alloys, stainless, alloy steels, and other engineering materials)., • Solid understanding of tooling, tool life, cutters, and fixturing methods., • Intermediate ability to interpret and apply GD&T., • Able to take ownership of the setup and run process from start to finish; comfortable juggling multiple competing priorities., • U.S. Person status required due to access to export-controlled technical data. Preferred qualifications • Experience with simultaneous 5-axis setup and operation., • Experience working with Okuma CNC machines and controllers., • Comfortable referencing a CAD model to verify dimensions/features (model-based measurement)., • Experience with CMM inspection (e.g., PC-DMIS or similar)., • Waterjet experience. Additive manufacturing exposure (e.g., FDM/SLA) and/or post-processing familiarity. Benefits What we offer • Competitive hourly pay at $33/hr-$43/hr (commensurate with experience), • Benefits: [Health/Dental/Vision/401(k)/PTO], • High-impact work on real aerospace hardware, • Fast-paced environment with direct collaboration across engineering, test, and manufacturing

Job DescriptionAutomotive Painter / Refinish Technician Ronkonkoma, NY | OEM-Certified, I-CAR Gold Class Collision Repair Facility We are a professional, OEM-certified collision repair organization built on pride in our craft, teamwork, and accountability. Our paint department is a cornerstone of quality — what leaves the booth represents the entire shop. Painters, body technicians, estimators, parts, and the front office work closely together to deliver consistent, high-quality repairs. We support one another, share best practices, and hold the work to a professional standard — because that’s how everyone gets better. We are looking for an Automotive Painter / Refinish Technician who takes pride in their work, values a clean process, and wants to be part of a well-run, team-focused shop. Role Overview This role is responsible for final refinish quality, efficiency, and consistency. You’ll work in a structured production environment with proper repair planning, clean files, and strong support from the front office and management. What You’ll Do Perform high-quality refinish work following OEM and paint manufacturer procedures Prep, mask, prime, block, and paint vehicles to shop standards Blend and color-match accurately and consistently Maintain a clean, organized paint booth and prep area Follow all safety, environmental, and material-handling procedures Communicate with production and management on workflow and needs Take pride in final delivery quality What We’re Looking For Prior experience as an automotive painter / refinish technician Strong understanding of paint processes, materials, and equipment Ability to maintain quality under production volume Attention to detail and pride in craftsmanship Team-oriented mindset and professionalism I-CAR training and OEM experience valued Paint manufacturer training (Axalta, PPG, BASF, etc.) a plus What Success Looks Like Here Consistent, high-quality finishes Minimal rework or comebacks Smooth handoffs from body to paint to detail Clean, organized work areas Strong teamwork across departments Compensation — Performance Based Hourly Guarantee: Competitive base hourly rate Flat-Rate Pay: Earn flat-rate flag hours above 40 hours/week Skill tiering applies based on experience and capability Quality and chargeback standards are clearly defined This structure provides stability with real upside for productive, quality-focused painters. Team Incentive Compensation This role also participates in a shared, team-based incentive program tied to overall shop performance. Incentives are based on delivered shop revenue, not individual sales or written estimates The incentive pool activates once delivered revenue exceeds $225,000 per month Payouts increase as shop performance improves Incentives are shared among front-office and production-support team members Designed to reward teamwork, consistency, and execution, not shortcuts Example Monthly Incentive Outcomes (Examples shown for illustration; individual payouts vary by role and team results) ~$275,000 delivered: $300–$500 per person ~$325,000 delivered: $600–$900 per person ~$375,000+ delivered: $1,000–$1,500+ per person Incentives are paid in addition to base compensation and align individual success with overall shop performance. Who This Role Is For Experienced automotive painters Refinish technicians who value quality and teamwork Professionals looking for steady volume and fair pay Individuals seeking long-term stability in a well-run shop Who Should Not Apply Entry-level candidates without refinish experience Anyone unwilling to follow process and quality standards Short-term or transitional job seekers This is a career role in a shop where quality work is respected, supported, and rewarded.

Job Description Lead Septic Repair & Excavation Technician Affordable Cesspool Sewer & Drain | Islandia, NY We Rush So You Can Flush® Affordable Cesspool Sewer & Drain has proudly served Long Island since 1992 and is one of the region's leading septic, sewer, drain, excavation, and wastewater service companies. We are seeking an experienced Lead Septic Repair & Excavation Technician to join our growing service division. This is a working field position—not just an equipment operator. You will operate excavators and skid steers while also working alongside your crew performing physical labor, completing repairs, and ensuring every project is completed safely, efficiently, and professionally. Every day brings a different challenge—from locating buried septic tanks to replacing sewer lines, installing risers, and restoring customers' properties. Responsibilities • Operate mini excavators, compact excavators, and skid steers, • Drive company trucks and trailers to residential and commercial job sites, • Locate and excavate buried cesspools, septic tanks, sewer lines, and utility connections, • Install septic tank risers, collars, access covers, and distribution box risers, • Replace main waste lines, sewer laterals, and underground piping, • Perform septic system repairs and service excavations, • Dig by hand around utilities, septic tanks, and structures when required, • Lay and connect sewer pipe and fittings, • Load and unload equipment, tools, and materials, • Organize job materials, truck inventory, and yard stock, • Work alongside and help lead a 2-3 person crew, • Restore job sites by backfilling, grading, cleaning, and leaving properties in excellent condition, • Communicate professionally with homeowners and commercial customers, • Complete job notes, photos, and documentation using company iPads and ServiceTitan, • Utilize GPS and mobile technology to navigate between job sites, • Follow Safe Dig 811 requirements, OSHA regulations, and company safety standards, • Maintain clean trucks, trailers, tools, and equipment Qualifications • Valid CDL Class A or Class B License required, • Clean driving record, • Experience operating mini excavators, skid steers, and compact construction equipment, • Experience in septic, sewer, excavation, underground utilities, plumbing, or sitework required, • Willingness to perform physical labor—not just operate equipment, • Ability to safely dig around underground utilities and existing infrastructure, • Strong customer service and communication skills, • Ability to use GPS, mobile applications, and CRM software on an iPad, • ServiceTitan experience is a plus, • Strong work ethic, leadership skills, and attention to detail, • Ability to work well on a 2-3 person crew in a fast-paced environment Compensation & Career Path Lead Septic Repair & Excavation Technician • $30-$50+ per hour based on experience, • Performance bonuses - Career Path to $100,000+, • Overtime opportunities, • Guaranteed year-round work Performance incentives based on: • Productivity and efficiency, • Quality of workmanship, • Safety performance, • Customer satisfaction, • Documentation accuracy, • Teamwork and leadership What We Offer • Competitive hourly pay, • Performance-based bonuses, • Guaranteed year-round work, • Full-time stable employment, • Modern trucks, trailers, excavators, and equipment, • Paid training and continuing education, • Career advancement opportunities, • Family-owned company serving Long Island since 1992 Schedule • Typical start times between 7:00 AM and 8:00 AM, • Some days may begin as earlier, • Monday through Friday, • Overtime opportunities available, • Work throughout Nassau and Suffolk County Career Path Lead Septic Repair & Excavation Technician → Lead Septic Installer → Install Manager → Production Manager → Operations Manager Why Join Us? If you're looking for more than just another equipment operator position, this is the opportunity for you. We're looking for a hands-on professional who takes pride in operating equipment, working alongside the crew, solving underground problems, and delivering high-quality workmanship. Every project is different, and every day offers the opportunity to build your skills while growing with one of Long Island's premier septic and excavation companies.

Description: Northeast Aero Compressor and PG Aerotech are seeking an experienced Facilities Technician II to help maintain the safe, compliant, and efficient operation of our 55,000 square foot FAA Part 145 certificated repair station and MRO facility in Hauppauge, NY. This is a mid-level, hands-on role for a technician who has moved beyond entry-level building maintenance and is ready to take on greater ownership of preventive maintenance programs, more complex mechanical and electrical troubleshooting, and vendor coordination — while continuing to perform daily hands-on repair and upkeep work. The Facilities Technician II reports to the Production Manager and works closely with them to keep all building systems, ground support equipment, and industrial machinery running reliably. Requirements: • Perform routine and corrective maintenance on HVAC, electrical, plumbing, lighting, and overhead door systems, escalating only the most complex issues to the Facilities Supervisor, • Execute scheduled Preventive Maintenance (PM) tasks and help maintain accurate maintenance logs, service records, and equipment histories in compliance with repair station requirements, • Diagnose and troubleshoot mechanical, electrical, and pneumatic/hydraulic issues on industrial equipment and aviation ground support equipment, • Assist in coordinating third-party vendors and contractors for specialized inspections, certifications, and repairs, • Perform general building maintenance including carpentry, painting, minor structural repairs, and groundskeeping/snow removal as needed, • Conduct routine facility and safety inspections, identify hazards or worn components, and proactively address or report them, • Support the cleanliness and organization of the facility, including production floor, offices, break rooms, restrooms, and grounds, • Help ensure fire and life-safety systems are functioning correctly and are tested/documented on schedule, • Operate company vehicles and material handling equipment (e.g., forklift) to move tools, parts, and supplies between areas or job sites, • Maintain compliance with FAA Part 145 repair station requirements, OSHA regulations, EPA standards, and applicable building codes, • Respond to maintenance requests from building occupants and prioritize/resolve issues promptly Experience and Skills • 2–5 years of experience in building/facilities maintenance, industrial maintenance, or a related mechanical/electrical trade; aviation, manufacturing, or regulated-facility experience preferred, • Working knowledge of HVAC, electrical, and plumbing systems, with demonstrated ability to independently troubleshoot and repair common issues, • Some exposure to industrial equipment such as compressed air systems, generators, or pneumatic/hydraulic equipment preferred, • Comfortable using hand and power tools safely and effectively, with strong mechanical aptitude and problem-solving skills, • Ability to work independently on assigned tasks while collaborating with the Facilities Supervisor on larger projects, • Strong communication and customer service skills when responding to occupant requests, • Ability to pass a pre-employment and random drug and alcohol screening as well as a background check Physical Requirements • Ability to lift at least 50 pounds, • Comfortable working at heights on ladders and lifts, and in confined spaces, outdoor environments, and varying temperatures, • Manual dexterity and ability to constantly manipulate small to medium components, • Ability to stand, walk, bend, and climb stairs for extended periods, • Frequent use of hand tools, power tools, and cleaning/lubricating/painting chemicals Education / Licenses / Certifications • High school diploma or GED required; trade school training or an associate degree in a mechanical, electrical, or facilities-related discipline preferred, • Valid state driver's license with a clean driving record required, • Forklift certification preferred, or ability to obtain within 30 days of hire, • OSHA 10-Hour (or higher) General Industry certification preferred, or willingness to obtain Compensation and Benefits • Full-time, hourly position: $28–$34 per hour, commensurate with experience, skills, and certifications, • This range reflects a mid-level role positioned between our entry-level Facilities Technician/Driver and our Facilities Supervisor, based on current Long Island / Hauppauge, NY market data for facilities and building maintenance technicians, • Medical, dental, vision, and life insurance options, • 401(k) with 100% match on the first 4%, • Paid holidays, vacation, and sick/personal leave accrued from date of hire, • Training/education budget, gym reimbursement, complimentary drinks, company events, and philanthropy opportunities Compensation details: 28-34 Hourly Wage PI834f007c39b5-26276-41065392

Job Description Join ProMach and shine. Whether you're creative, strategic, persuasive, or mechanically inclined, there’s a place for you here. Be a problem-solver, a closer, a futurist - whatever drives you. At ProMach, you'll be challenged and rewarded as you help improve packaging performance and shape the future of automation. And we’ll be proud to have you on the journey. Do we have your attention? Keep reading. The Service Coordinator is responsible for coordinating field service activities, managing service requests, preparing service estimates and Service Agreements, scheduling technicians, supporting billing activities, and maintaining accurate service records. This role works closely with customers, field technicians, Engineering, Spare Parts, Retrofits, Project Management, Sales, Finance, and other internal departments to ensure service activities are executed efficiently and customer commitments are met. The Service Coordinator is responsible for coordinating field service activities, managing service requests, preparing service estimates and Service Agreements, scheduling technicians, supporting billing activities, and maintaining accurate service records. This role works closely with customers, field technicians, Engineering, Spare Parts, Retrofits, Project Management, Sales, Finance, and other internal departments to ensure service activities are executed efficiently and customer commitments are met. This position operates in a high-volume, fast-paced environment where responsiveness, organization, accuracy, and follow-through are critical. Many requests involve production-impacting issues, emergency service calls, changing technician schedules, and urgent customer needs. The Service Coordinator is responsible for coordinating resources, communicating status updates, tracking open activities, and ensuring service-related actions progress from initial request through completion. Key Responsibilities • Monitor and manage the Service department email inbox and Salesforce cases., • Gather customer information and service requirements for service requests, estimates, emergency calls, follow-up work, and Service Agreements., • Create service estimates in Syteline and manage related opportunities within Salesforce., • Follow up on open estimates and obtain customer purchase orders., • Support the preparation, follow-up, renewal, and administration of Service Agreements., • Schedule and dispatch field service technicians through Salesforce Field Service Lightning., • Create and maintain service appointments and calendars., • Coordinate technician schedules, travel requirements, customer site visits, and service activities., • Communicate service schedules, status updates, and schedule changes to customers and internal stakeholders., • Support emergency service requests and machine-down situations requiring expedited response., • Monitor technician time entries in Salesforce Field Service Lightning and verify alignment with Workday and customer billing records., • Review technician expense reports and per diem submissions for accuracy and compliance with company policies., • Coordinate technician travel arrangements, including emergency travel requirements when necessary., • Monitor submission of technician trip reports, daily notes, emergency call logs, and related documentation., • Ensure service documentation is complete, accurately recorded, and properly maintained within company systems., • Review service reports and technician notes to identify required follow-up actions and coordinate completion of parts quotations, additional service visits, retrofit opportunities, and customer requests., • Coordinate parts identification activities with Engineering and service personnel and submit requests to the Spare Parts department for quotation., • Coordinate follow-up service visits, retrofit activities, machine installations, and other customer support requirements identified during service activities., • Ensure customer, machine ownership, machine location, and bill-to/ship-to records are updated when changes are identified during routine service activities., • Review completed service activities to ensure required documentation is received and ready for invoicing., • Support accurate invoicing of service labor, travel, expenses, emergency support activities, and Service Agreement work., • Maintain accurate records within Salesforce, Field Service Lightning, Syteline and other company systems., • Track open service activities and follow through until customer commitments are completed., • Support departmental KPI reporting and continuous improvement initiatives. Qualifications • High School Diploma or equivalent required; Associate's or Bachelor's Degree preferred., • Minimum of 2 years of experience in customer service, service coordination, dispatching, scheduling, administrative support, or a related role., • Experience within a manufacturing, industrial equipment, custom machinery, field service, or aftermarket environment preferred., • Strong organizational and time-management skills with the ability to manage multiple priorities simultaneously., • Demonstrated ability to work effectively in a high-volume, fast-paced environment., • Excellent verbal and written communication skills., • Strong attention to detail and commitment to accuracy., • Strong follow-up, organizational, and problem-solving skills., • Ability to coordinate activities across multiple departments and drive requests to completion., • Proficiency with Microsoft Office applications, including Outlook, Excel, and Word., • Experience with Salesforce and Salesforce Field Service Lightning preferred., • Experience with ERP systems; Syteline experience preferred., • Familiarity with service scheduling, dispatching, service estimates, Service Agreements, purchase orders, expense reporting, and billing processes preferred., • Basic understanding of industrial machinery and field service operations preferred. What’s in it for you? There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career. In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. Total compensation includes your salary, comprehensive medical/dental programs, as well as life insurance, a generous paid time off program, and a retirement savings plan with a company match. And because we understand the importance of feeling protected, there is no waiting period for benefits – you are eligible on your first day of employment! Please note that the pay ranges listed on external job boards, outside our posting details, do not accurately reflect our internal compensation ranges. Pro Mach, Inc. was named to the Inc. 5,000 list of the fastest growing private companies in the U.S. seven times. We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities. We have the rewards, opportunities, and the market strength of a large organization combined with the entrepreneurial culture of a small, fast-paced company. You will enjoy the benefits of working with a growing company that competes globally, with the personal touch and feel of a smaller company where you can make an impact every day. ProMach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Base Hourly Rate $25-$27/hr #Moder #INMOD #ZRMOD

Randstad - - Responsibilities: hands-on production work with manufactured parts; support day-to-day production processes; follow instructions to maintain consistent quality; reliable and detail-oriented; ability to work with hands and tools.

You've invested a lot of time and energy in your education. Now you want the chance to make your mark. We offer challenging opportunities for you to learn and grow professionally. In our programs, you'll be immersed in a culture of continuous improvement, with the goal of changing health care for the better. Within our Retail locations, we bring this promise to life with heart every day and our Graduate Pharmacy Interns play a critical role in supporting our pharmacy teams to consistently deliver on our brand promise, while developing their own skills in preparation for increasing responsibility. As a Graduate Pharmacy Intern, you will apply your didactic learning from pharmacy school and pharmacy practice into real-world practice to become ready for a Pharmacist role. Under the direction of your preceptor and District Leader, you will complete a comprehensive training roadmap within 120 days of graduation designed to further your knowledge of store, district, and regional operations. Through your hands-on experience, training roadmap, and time spent with leaders in your district you will deepen your understanding of patient safety and error prevention, quality assurance drug utilization review (DUR), pharmacy professional standards such as corresponding responsibility and red flag detection. While in the pharmacy, you will assist the pharmacy team to ensure that pharmacy operations run smoothly, our patients' prescriptions are filled promptly, safely, and accurately, and we are providing caring service that exceeds patient expectations. You will learn to operate as part of the pharmacy team through consistent application of Standard Operating Procedures (SOPs), best practices, and effective communication. Throughout your shifts and in all customer and colleague interactions, you will learn to demonstrate empathy and genuine care, and contribute to a safe and inclusive culture where all people feel valued and empowered. As tenure and readiness increase, you will take on greater accountability for supporting the management, oversight, and operations within the pharmacy, including but not limited to: • Living our purpose by following all company SOPs at each workstation to help our Pharmacists and Technicians manage and improve patient health, • Following pharmacy workflow procedures at each pharmacy workstation (i.e., production, pick-up, drive-thru, and drop-off) for safe and accurate prescription fulfillment, • Contributing to positive patient experiences by showing empathy and genuine care: creating heartfelt and personalized moments while serving patients at pick-up, drive-thru, and over the phone; keeping patients healthy by offering immunizations and other services at the register and over the phone; and demonstrating compassionate care by solving or escalating patient problems, • Offering to counsel, fielding medical questions, and soliciting information on a patient's medical history to provide optimal care, when appropriate under the direct supervision of a licensed pharmacist, • Taking telephonic prescriptions from the prescriber, and calling the prescriber to clarify prescriptions or facilitate medication changes, where allowed by state regulation, • Maintaining the highest level of self-awareness and providing in-the-moment coaching, training, and mentoring to pharmacy team members while sharing best practices, • Completing basic inventory activities, as permitted by law, and as directed by the pharmacy leadership team, such as accurately putting away medication deliveries and completing cycle counts, returns-to-stocks, waiting bin inventories, etc., • Contributing to a high-performing team, embracing a growth mindset, and being receptive to feedback; actively seeking opportunities to expand clinical and technical knowledge needed to better assist patients, • Remaining flexible for both scheduling and business needs, while contributing to a safe, inclusive, and engaging team dynamic; voluntarily traveling to stores in the market to work shifts as needed by the business, • Understanding and complying with all relevant federal, state, and local laws, regulations, professional standards, and ethical principles. Complying with CVS policies and procedures to ensure patient safety, compliance with controlled substance dispensing and recordkeeping, and to protect patient privacy and security, • Delivering additional patient health care services (e.g., immunizations, point-of-care testing, and voluntarily staffing offsite clinics), where allowable by law and supported by required training and certification Where permissible, the Graduate Pharmacy Intern may also support immunizations, which includes the following responsibilities: • Completing additional licensure and training requirements, in compliance with state Board of Pharmacy regulations, to obtain Technician Immunizer status to support preparing and administering vaccines, • Educating patients about vaccines and answering questions to obtain informed consent, • Monitoring for, and responding to, adverse reactions; reporting adverse reaction events per public health requirements, • Reviewing and collecting patient information; tracking and documenting for each applicable patient Required Qualifications: • PharmD graduate of a U.S. accredited program prior to beginning the Post-Graduate Training Program at CVS Health, • Ability to obtain required pharmacist licensure within the required timeframe, per state guidelines. Failure to obtain required Pharmacist licensure within 120 days of graduation will result in separation of employment., • Must possess, or be in the process of obtaining, valid intern and/or technician licensure as required Essential Functions: • Regular and predictable attendance, including nights and weekends, • Ability to complete required training within designated timeframe, • Attention and Focus:, • Ability to concentrate on a task over a period of time, • Ability to pivot quickly from one task to another to meet patient and business needs, • Ability to confirm prescription information and label accuracy, ensuring patient safety, • Customer Service and Team Orientation:, • Actively look for ways to help people, and do so in a friendly manner, • Notice and understand patients' reactions, and respond appropriately, • Communication Skills:, • Use and understand verbal and written communication to interact with patients and colleagues, • Utilize active listening by giving full attention to what others are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times, • Mathematical Reasoning:, • Ability to use math to solve a problem, such as determining the total number of tablets to dispense, day's supply, and/or number of full bottles and additional bottles needed to fill a prescription, • Problem Resolution:, • Identifying challenging patient or colleague interactions and choosing the best course of action when faced multiple options, • Physical Demands:, • Be mobile and remain upright for extended periods of time, • Lift, scan, and bag items, • Reach overhead; stretch or reach out with the body, arms, and/or legs to grasp items, • Move fingers repetitively; picking, pinching, typing, or otherwise working primarily with fingers rather than whole hand or arm, • Extend hand(s) and arm(s) multiple directions to place, move, or lift items, • Control precision; quickly adjust machines to exact positions, • Stoop to a considerable degree, requiring full use of the lower extremities and back muscles to move items between low and high positions, including bending spine at the waist, • Close visual acuity to perform activities such as: transcribing, viewing a computer terminal, reading, visual inspection involving small parts, • Occasionally lift of up to 20 lbs and/or exert up to 20 lbs. of force; Frequently lift of up to 10 lbs and/or exert up to 10 lbs. of force; Consistently lift and/or exert a negligible amount of force to move objects., • Express or exchange ideas by means of spoken word where detailed or important spoken instructions must be conveyed accurately, • Have the ability to receive detailed information through oral communication, • Any additional tasks as directed by Supervisor or Manager Preferred Qualifications: • 1+ years of related work experience in pharmacy, retail, medical, or customer service setting, • Ability to become immunization certified: Once state regulations are met, pharmacy interns should be striving to provide patient immunizations as this is an essential pharmacist function, • Ability to work in home store, and across the market in other locations, to meet business needs, • Proficiency in Microsoft Suite (Outlook, Excel, Word, PowerPoint, etc.) Pay Range The typical pay range for this role is: $25.25 - $42.00 Whether in our pharmacies or through our health service offerings, we are pioneering a bold new approach to total health care. As health care

iRocket is developing reusable, fully autonomous small launch vehicles to deliver more frequent, lower-cost access to space. We work across propulsion, structures, integration, and test domains, building toward an era of responsive launch systems. The Role: We are seeking a Manufacturing Technician to support the fabrication, assembly, and integration of structural and mechanical subassemblies for our rocket hardware. You'll work closely with manufacturing and quality engineers to build reliable flight hardware in line with strict aerospace standards. Responsibilities: • Manufacture and assemble flight hardware using methods such as drilling, fastening, bonding, and other mechanical processes, • Use precision calibrated tools (e.g. torque wrenches, micrometers, calipers), • Read and interpret technical drawings, blueprints, and work instructions, • Follow procedures, specifications, and test instructions to ensure hardware is built to design requirements, • Collaborate with manufacturing engineers and quality personnel to develop, refine, and document work instructions, • Ensure production tasks are completed on schedule, safely, and to the required quality, • Perform other related duties as needed to support efficient operations

Machine Operator / Production Setup Technician. Are you a hands-on technical professional who excels at maximizing machine uptime? We are immediately hiring skilled machine operators / production setup technicians to run and maintain high-speed manufacturing lines.

Abacus Service Corporation - 77 Raynor Avenue - Responsibilities: Set up test apparatus and conduct tests of production assemblies; Lay out and assemble units for test equipment; Modify equipment by adding/removing components; Correct malfunctions by adjustments or part replacements; Monitor and ver

Resource Label Group is seeking a 2nd Shift Quality Assurance Technician to inspect raw materials and finished goods, ensuring compliance with product specs. You will work with design, production, and client services teams to address quality concerns and maintain high standards.

Resource Label Group is seeking a 2nd Shift Quality Assurance Technician to inspect raw materials and finished goods, ensuring compliance with product specs. You will work with design, production, and client services teams to address quality concerns and maintain high standards.

Resource Label Group is seeking a 2nd Shift Quality Assurance Technician to inspect raw materials and finished goods, ensuring compliance with product specs. You will work with design, production, and client services teams to address quality concerns and maintain high standards.

Position Purpose and Objectives: Under the direction of the Customer Service, Quality Control Supervisor, the Quality Control Technician performs routine and intermediate quality inspections.He/she/they executes standardized quality checks, verifies job setup and production output, and supports corr

Job Description Role summary We’re hiring a Survey Drafting Technician to join our land surveying team. You will convert field notes and survey data into accurate, production-ready CAD drawings and legal plats. This role suits a detail-oriented drafter who understands surveying principles, boundary documentation, and CAD standards. Key responsibilities • Produce CAD drawings from field data, GPS files, and survey notes., • Draft legal plats, boundary maps, and topographic plans following state and company standards., • Review and verify measurements, coordinate systems, and metadata for accuracy., • Annotate drawings with bearings, distances, easements, and other legal descriptions., • Coordinate with surveyors and project managers to resolve discrepancies and incorporate revisions., • Maintain drawing templates and layer standards to ensure consistency across projects., • Prepare files for printing and electronic delivery; manage version control. Required qualifications • 2+ years drafting experience in land surveying or civil engineering., • Proficiency in AutoCAD Civil 3D or equivalent CAD software., • Familiarity with survey data formats (CSV, DXF, DWG, GNSS/GPS exports)., • Strong understanding of boundary law basics, legal descriptions, and surveying terminology., • Excellent attention to detail and strong organizational skills., • Ability to read field notes and translate them into precise drawings. Preferred qualifications • Associate degree or certificate in Surveying Technology, Civil Drafting, or related field., • Experience with GIS software and coordinate transformations., • Knowledge of state-specific platting requirements and recording standards.

Senior Optical Imaging Production Technician. Work closely with optical, mechanical, and electrical engineers to transfer new designs from prototype into repeatable production, and mentor junior technicians. In this role, you will work at the heart of our production and integration process, taking p

Senior Optical Imaging Production Technician. Work closely with optical, mechanical, and electrical engineers to transfer new designs from prototype into repeatable production, and mentor junior technicians. In this role, you will work at the heart of our production and integration process, taking p

Ensuring the required materials are available for production, and that the factory is safe for all workers. Staying up-to-date with efficient methods of production and equipment maintenance procedures.

Seeking highly experienced CNC Service Technicians with the ability to quickly diagnose & repair system failures of many types, including: • Communication • Electrical • Hydraulic • Mechanical • Pneumatic • Programming Technicians shall work in tandem with in-house parts specialists to q

Assembler Location: Bohemia, NY Job ID: #73150 Pay Range: $21-24 Job Description Seeking motivated individuals who are looking to join a fast paced – growing organization to work in the production department doing: -Mechanical assembly of raw materials -Utilize different hand tools -QC Inspections

As Production Supervisor for our Hi-Reliability discrete semiconductor product line, you direct, plan, and administer the production activities of the department providing direction and support across all work shifts, and owning on-time delivery, profitability, quality, and safety. Manage production

Field Service Technician I - Brooklyn/Queens. We're actively seeking a Field Service Technician to deliver amazing experiences and elevated efficiency within the routine maintenance of Canon-supported products in accordance with Service and Parts Standards.