Trabajos shift lead en Piscataway, New JerseyCrear alertas

Job Title: Nuclear Medicine Technologist Location: RWJ New Brunswick Department: Nuclear Medicine Req#: 0000190281 Status: Full-Time Shift: Day Pay Range: $56.66 - $70.12 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. $12,000 Sign On Bonus Job Overview: Assists the nuclear physician with the implementation of special imaging procedures. Qualifications: Required: Graduate from an accredited Nuclear Medicine Technology program. Must possess a current NJ State license. ARRT and/or NMTCB BLS certification required Preferred: Two years hospital experience as a staff technologist preferred. NMTCB Fusion Certification or ARRT R, CT, certification preferred Scheduling Requirements: This is a full time, day position 40 hours/week, Essential Functions: • Abides by standards established by the hospital, state and federal regulatory agencies., • Accepts special assignments from supervisor and completes them on time., • Assists the nuclear physician with the implementation of special imaging procedures., • Assures that all tests are performed properly and test results are valid and accurate prior to the release of the patient., • Calibrates the dose calibrator and performs QC procedures on gamma cameras per departmental protocols and notifies the lead tech of any malfunctions/issues promptly., • Explains the procedure to the patient clearly including wait times and performs the procedure assuring maximum comfort to the patient. Obtains best possible images by using prescribed technical parameters and techniques., • Identifies the patients (both IP and OP) per hospital SOP before starting any procedure., • Performs all hot lab related functions such as receiving, using and discarding of Radio-pharmaceuticals following/applying vendor, departmental and DEP rules and regulations strictly. At RWJBarnabas Health, our market-competitive Total Rewards package provides comprehensive benefits and resources to support our employees’ physical, emotional, social, and financial health. Paid Time Off (PTO) Medical and Prescription Drug Insurance Dental and Vision Insurance Retirement Plans Short & Long Term Disability Life & Accidental Death Insurance Tuition Reimbursement Health Care/Dependent Care Flexible Spending Accounts Wellness Programs Voluntary Benefits (e.g., Pet Insurance) Discounts Through our Partners such as NJ Devils, NJ PAC, Verizon, and more! Choosing RWJBarnabas Health RWJBarnabas Health is the premier health care destination providing patient-centered, high-quality academic medicine in a compassionate and equitable manner, while delivering a best-in-class work experience to every member of the team. We honor and appreciate the privilege of creating and sustaining healthier communities, one person and one community at a time. As the leading academic health system in New Jersey, we advance innovative strategies in high-quality patient care, education, and research to address both the clinical and social determinants of health. RWJBarnabas Health aims to truly make a unique impact in local communities throughout New Jersey. From vastly improving the health of local residents to creating educational and career opportunities, this combination greatly benefits the state. We understand the growing and evolving needs of residents in New Jersey—whether that be enhancing the coordination for treating complex health conditions or improving community health through local programs and education. Equal Opportunity Employer

As a Local Yard Driver with Lazer Logistics, you will stay in one location for your entire shift. No traffic, no long routes, and no multiple stops. Instead, you focus on moving trailers within the yard in a safe, controlled environment. This is one of the most consistent and predictable CDL jobs available.You know where you are going, what you are doing, and when your day starts and ends.If you are looking for a CDL job that offers consistency, predictability, and a better day-to-day driving experience, this is it!t. What You Can Expect • Home daily with a consistent schedule, • Limited road driving or highway traffic, • No touch freight, • No customer deliveries or multi-stop routes, • Steady, repeatable work in one location, • Predictable hours and reliable pay Pay and Benefits • $24.50 per hour starting pay, • $1.00 shift differential (dependent on schedule), • Overtime available after 40 hours, • Weekly pay, • Referral bonus up to $2,000 Why Work at Lazer Logistics? Lazer Logistics is a national leader in yard management, with over 6,000 employees across the United States and Canada. We are proud to offer stable, long-term driving opportunities with a strong emphasis on safety, consistency, and quality of life. • Modern, well-maintained equipment, including EV yard trucks, • Over 2 million zero-emission miles through our EV program, • Employee Ownership Program, • Opportunities for advancement into lead and management roles, • Supportive team environment focused on safety and respect Pay Range: 24.50-25.50 per_hour, General Benefits: Full benefits package includes: • Medical, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays, • Short- and long-termdisability, • Employee Assistance Program, • Optional pet and voluntary insurance, • Employee Ownership Program Job Responsibilities • Move trailers within the yard and between dock doors, • Perform drop and hook operations, • Conduct pre-trip and post-trip inspections, • Follow all safety procedures and company policies, • Communicate with dispatch and yard personnel, • Maintainaccuratelogs and documentation Requirements • Valid Class A CDL, • Current DOT Medical Card, • Safe driving record, • Experience operating tractor-trailers, • Ability to work in all weather conditions, • Ability to get in and out of the truck throughout the shift Lazer Logistics is an equal opportunity employer, committed to the vision that founded our company. We continue to grow and evolve in ways we never imagined, making Lazer an exciting place to work! #DNS

When you join Verizon\n You want more out of a career. A place to share your ideas freely — even if they’re daring or different. Where the true you can learn, grow, and thrive. At Verizon, we power and empower how people live, work and play by connecting them to what brings them joy. We do what we love — driving innovation, creativity, and impact in the world. Our V Team is a community of people who anticipate, lead, and believe that listening is where learning begins. In crisis and in celebration, we come together — lifting our communities and building trust in how we show up, everywhere & always. Want in? Join the #VTeamLife. \n \n \n What you’ll be doing \n With your sales experience, ability to efficiently manage your time, excellent customer relations skills, and excitement for technology, you'll deliver outstanding and innovative business solutions that support our technology evolution and the way businesses connect. Whether you're continuously hunting and prospecting for new business or growing existing accounts, you'll consult with customers to identify their business challenges and recommend tailored solutions to solve them and ultimately deliver a powerful return for customers while improving their business and growing our revenue. \n \n\n • \n Developing and qualifying leads within respective territory to drive additional sales opportunities through cold-calling, partner-selling, lead-generation campaigns and modern social selling techniques. \n • \n Gaining new business and incremental revenue to meet sales targets. \n • \n Retaining, managing and growing the existing customer base. \n • \n Educating and exciting customers while leveraging innovative business solutions. \n • \n Building relationships with key decision makers. \n • \n Presenting and creating multi-product solution opportunities. \n • \n Understanding and selling groundbreaking integrated software solutions including Cloud, Security, ISP, VoIP and Google platforms. \n • \n Tracking and reporting progress through sales force automation tools. \n • \n Drive sales, increase service revenue and manage relationships for accounts in the 1–19 Employee Segment \n\n What we’re looking for...\n You’re a self-motivated person who thrives on crafting the right solution to solve a client’s problems. And you are great at explaining how complex technology can solve everyday business problems in a language people understand. Cold-calling feels like a sport to you because meeting new people and discovering their needs is what you enjoy. People seek you out for advice and counsel. You seek to win and take the initiative to close deals and help others around you. You act with integrity. You know that when the team wins, we all win. \n You’ll need to have:\n \n\n • \n Bachelor’s degree or three or more years of work experience. \n • \n Three or more years of relevant work experience. \n • \n Willingness to work in a mobile working model with travel within your assigned geographic sales territory. Expected travel may be up to approximately 50% of the time. \n • \n Valid driver’s license. \n\n \n Even better if you have one or more of the following: \n \n\n • \n A degree - Associates or Bachelor's Degree, or related certifications/college courses. \n • \n Two or more years of business-to-business or outside sales experience, including business acquisition and prospecting/cold calling. \n • \n Technology sales and educational experience i.e., SaaS sales experience, CRM, SalesForce or other client management tools, social media, etc. \n • \n Strong presentation skills in a face-to-face and virtual environment. . \n • \n Experience building and maintaining strong business relationships with all levels of client organizations. \n • \n Ability to work in a fast-paced, self-directed, entrepreneurial environment. \n • \n Ability to manage time and prioritize tasks to accomplish goals. \n • \n Ability to implement feedback and tailor your approach for success. \n\n \n \n \n \n \n Where you’ll be workingIn this mobile role, you'll primarily work from customer or field location(s), with occasional visits to a Verizon location for in-person training and meetings.\n \n Scheduled Weekly Hours40\n \n Equal Employment Opportunity \n Verizon is an equal opportunity employer. We evaluate qualified applicants without regard to veteran status, disability or other legally protected characteristics. \n \n Benefits and Compensation\n Our benefits are designed to help you move forward in your career, and in areas of your life outside of Verizon. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance, identity theft protection, pet insurance and group home & auto insurance. We also offer a matched 401(k) savings plan, up to 8 company paid holidays per year and up to 6 personal days per year, paid parental leave, adoption assistance and tuition assistance, plus other incentives, we’ve got you covered with our award-winning total rewards package. Depending on the role, employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, allowances, etc. Newly hired employees receive up to 15 days of vacation per year, which grows with additional service. For part-timers, your coverage will vary as you may be eligible for some of these benefits depending on your individual circumstances. \n \n The salary will vary depending on your location and confirmed job-related skills and experience. This is a commission based position with the potential to earn more. For part-time roles, your compensation will be adjusted to reflect your hours.\n \n The annual salary range for the location(s) listed on this job requisition based on a full-time schedule is: $37,000.00 - $64,000.00.\n \n \n \n \n \n \n \n \n \n \n \n

Job DescriptionExperienced HVAC Install Technician - No On-Call, Choose Your Shift, Up to $32/Hour + $1,500 Sign-On BonusBuild Your Career With a Company That Puts Technicians First At Gold Medal, we know great technicians are the backbone of our success. That's why we've built a workplace focused on supporting our installers with the tools, training, flexibility, and career growth they deserve. If you're an experienced HVAC Installer looking for year-round work, no on-call, flexible scheduling, and a team that truly has your back, we'd love to meet you. Why HVAC Installers Choose Gold Medal Competitive Pay & Bonus Opportunities • Earn up to $32/hour, • Up to $1,500 Sign-On Bonus for qualified candidates, • Overtime opportunities available on a voluntary basis, • Consistent, year-round work Work-Life Balance, • No On-Call Rotation, • No Mandatory Weekends, • Flexible scheduling options designed around your lifestyle, • Choose a shift that works for you Focus on Installing, Not Running Around Our warehouse team helps you stay productive: • Equipment and materials delivered directly to the jobsite, • No warehouse stops before work, • No supplier pickup runs, • No hauling away installation debris, • Dedicated parts runners available seven days a week You focus on the install. We handle the logistics. Industry-Leading Support • On-site coaching and assistance from Field Supervisors, • Fully stocked warehouse, • Company-issued phone and iPad, • Minimal paperwork and streamlined processes, • New, clean, fully stocked company trucks for Lead InstallersTraining & Career Growth We invest heavily in technician development through: • Sheet metal training, • Electrical training, • Boiler training, • Zoning systems training, • Oil systems training, • Continuing HVAC education Looking to become a Lead Installer, Field Supervisor, or Operations Leader? We promote from within whenever possible and provide the training needed to help you get there. Comprehensive Benefits Package • Medical, Dental, and Vision Insurance, • 401(k) Retirement Plan, • Paid Time Off, • Company-provided technology and tools, • Stable, growing company with long-term career opportunities What You'll Do • Install residential HVAC systems safely and efficiently, • Ensure installations meet company quality standards, • Deliver an exceptional customer experience, • Maintain a clean, organized, and professional jobsite, • Collaborate with teammates and field leadership to complete projects successfullyWhat We're Looking For, • Residential HVAC installation experience, • Strong mechanical aptitude and troubleshooting skills, • Commitment to safety and quality workmanship, • Positive attitude and team-first mentality, • Valid driver's license and clean driving record, • Desire to continue learning and growing within the tradeJoin a Company That Invests in You At Gold Medal, you're more than an installer. You're part of a team that values your expertise, supports your success, and provides the opportunity to build a long-term career. No On-Call. No Mandatory Weekends. Flexible Schedules. Year-Round Work. Apply today and discover why so many HVAC professionals choose Gold Medal as the place to build their future. Job Posted by ApplicantPro

Lazer Logistics is Now Hiring Local CDL-A Yard Drivers! Start at $20.50 - $27.00 per Hour - Home Daily - No-Touch Freight Limited-Time $3,000 Stay Bonus \n \n If you are looking for a local CDL job near you that offers consistency, predictability, and a better day-to-day driving experience, this is it! As a Local Yard Driver with Lazer Logistics, you will stay in one location for your entire shift. No traffic, no long routes, and no multiple stops. Instead, you focus on moving trailers in one location and going home after every shift. \n Pay and Benefits:\n\n • Start at $20.50 - $27.00 per hour - based on location\n, • Limited-time $3,000 stay bonus - based on location\n, • Overtime available after 40 hours\n, • Shift differential pay of $0.50 - $3.00 - based on location\n, • Weekly pay\n, • Referral bonus up to $2,000\n\n What You Can Expect:\n\n • Home daily with a consistent schedule\n, • Limited road driving or highway traffic\n, • No-touch freight\n, • No customer deliveries or multi-stop routes\n, • Steady, repeatable work in one location\n, • Predictable hours and reliable pay\n\n Move with Purpose at Lazer Logistics - Apply Now!\n Full Benefits Package Includes:\n\n • Medical, dental, and vision insurance\n, • Short/long-term disability, voluntary, and pet insurance\n, • 401(k) with company match\n, • Paid time off and holidays\n, • Employee Ownership Program\n, • Employee Assistance Program\n, • Work Shoe Program\n\n Job Responsibilities:\n\n • Move trailers within the yard and between dock doors\n, • Perform drop and hook operations\n, • Conduct pre-trip and post-trip inspections\n, • Follow all safety procedures and company policies\n, • Communicate with dispatch and yard personnel\n, • Maintain accurate logs and documentation\n\n Requirements:\n\n • Valid Class A CDL\n, • 6+ months of verifiable experience\n, • Current DOT Medical Card\n, • Safe driving and FMCSA Clearinghouse record\n, • Acceptable background check\n, • Experience operating tractor-trailers\n, • Ability to work in all weather conditions\n, • Ability to get in and out of the truck throughout the shift\n\n Why Work at Lazer Logistics?\n Lazer Logistics is a national leader in yard management with more than 5,000 employees across the United States and Canada. We are proud to offer stable, long-term driving opportunities with a strong emphasis on safety, consistency, and quality of life. \n\n • Modern, well-maintained equipment, including EV yard trucks\n, • Advanced tools that improve efficiency and productivity\n, • Over 2 million zero-emission miles through our EV program\n, • Opportunities for advancement into lead and management roles\n, • Training and development opportunities\n, • Supportive team environment focused on safety and respect\n\n Help Deliver the Goods with Lazer Logistics - Apply Today!\n If you are looking for a local CDL job with steady hours, no traffic, and daily home time, apply now to join Lazer Logistics. Lazer Logistics is an equal opportunity employer, committed to the vision that founded our company. We continue to grow and evolve in ways we never imagined, making Lazer an exciting place to work! \n (*Based on location)

Job Description About Us: Sugaring NYC Somerset is an organic waxing studio specializing in sugaring hair removal, brow lamination, and lash lifts. We’re dedicated to providing a toxin-free, cruelty-free, and empowering self-care experience. We’re looking for a Lead Esthetician to lead our team and ensure top-quality service for our clients. About the Role: The Lead Esthetician is a hands-on leader who ensures smooth daily operations, maintains high service standards, and fosters a positive team culture. This role combines technical expertise in sugaring and beauty services with strong leadership, training, and customer service skills. You’ll be the bridge between our estheticians and management, ensuring a welcoming and hygienic environment while supporting scheduling, inventory, and team performance. Key Responsibilities: Team Leadership & Training • Supervise and mentor Estheticians to maintain service excellence., • Train new hires and provide ongoing development for existing staff., • Address service-related concerns and client feedback professionally. Salon Cleanliness & Maintenance • Ensure treatment rooms and common areas meet the highest hygiene standards., • Delegate and oversee daily cleaning routines., • Perform routine inspections to maintain equipment and safety standards. Client Experience & Retention • Build strong relationships with clients to encourage return visits and memberships., • Handle escalated client concerns to ensure satisfaction. Inventory & Quality Control • Monitor and report stock levels for treatment products and tools., • Ensure staff follows company protocols for all services (e.g., sugaring, lash lifts, brow lamination)., • Conduct service quality checks. Scheduling • Assist with shift coverage and staff scheduling. Requirements: ✅ 3+ years of experience in sugaring or a related beauty service. ✅ Valid Esthetician or Cosmetology License issued by the New Jersey State Board. ✅ Strong leadership and mentorship abilities. ✅ Excellent communication and customer service skills. ✅ Ability to multitask in a fast-paced environment. ✅ Detail-oriented with a commitment to hygiene and safety standards. Why Join Us? • Be part of a growing, women-owned business focused on organic self-care., • Competitive pay + tips + performance bonuses., • Ongoing professional development and growth opportunities., • Work in a fun, empowering, and toxin-free environment! Ready to lead our team and help redefine self-care? Apply now!

Job Description At Smashburger, we don’t just make burgers—we create crave-worthy moments that keep guests coming back for more. We’re driven by a shared commitment to excellence, working as one team and taking bold action to deliver unforgettable experiences. Here, you’ll be part of a group that works hard and genuinely cares—where passion and dedication matter just as much as skill. At Smashburger, we live by our values: Taste Obsessed – Bring flavor into every shift Premium Experience – Lead Boldly. Deliver Flawlessly Stay Hungry – Literally & Figuratively One Team! One Smash! – Smash Together Do What’s Right – Act with honesty and consistency. If this sounds like your kind of place, we’d love to have you on the team! Why You’ll Love Working Here • Earn extra with tip share (up to $2/hour), • 50% off delicious menu items, • Flexible schedules in a fun, team-focused environment, • Paid time off, medical, dental & vision benefits*, • 401(k) match (21+), • Employee Assistance Program, • Referral bonuses, • Fast-track opportunities for growth and leadership roles, • Free uniform *Eligibility based on tenure and hours worked What You’ll Do As a Guest Service Expert, you’ll create great experiences for every guest by: • Greeting guests with a friendly, positive attitude, • Taking accurate orders and handling payments, • Making menu recommendations and upselling when appropriate, • Keeping the dining area clean and welcoming, • Supporting your team in a fast-paced environment, • Ensuring every guest leaves satisfiedWhat We’re Looking For, • No experience needed—we provide training, • Must be at least 16 years old, • Strong communication and teamwork skills, • Ability to stand for long periods and lift up to 25 lbs, • Availability for flexible hours, including nights, weekends, and holidays, • Commitment to food safety and company standards All applicants and employees have an equal opportunity for employment and advancement within Smashburger. Smashburger is dedicated to the principles of equal employment opportunity. We prohibit unlawful discrimination against applicants, prospective applicants, or employees on the basis of age 40 and over, race, sex, color, religion, national origin, disability, genetic information, sexual orientation, gender identity, military or veteran status, or any other applicable status protected by state or local law. This prohibition includes unlawful harassment based on any of these protected classes. Unlawful harassment includes verbal or physical conduct which has the purpose or effect of substantially interfering with an individual’s work performance or creating an intimidating, hostile, or offensive work environment. We maintain a workplace free of racial slurs and bias. This policy applies to all employees, including managers, supervisors, co-workers, and non-employees such as customers, clients, vendors, consultants, etc. Any conduct in violation of these company policies is also a violation of the law. Employees who engage in, ratify, or perpetuate discrimination, harassment or retaliation will be subject to disciplinary action, up to and including immediate discharge. https://smashburger.com/job-applicant-privacy-policy We use eVerify to confirm U.S. Employment eligibility.

Job Description At Smashburger, we don’t just make burgers—we create crave-worthy moments that keep guests coming back for more. We’re driven by a shared commitment to excellence, working as one team and taking bold action to deliver unforgettable experiences. Here, you’ll be part of a group that works hard and genuinely cares—where passion and dedication matter just as much as skill. At Smashburger, we live by our values: Taste Obsessed – Bring flavor into every shift Premium Experience – Lead Boldly. Deliver Flawlessly Stay Hungry – Literally & Figuratively One Team! One Smash! – Smash Together Do What’s Right – Act with honesty and consistency. If this sounds like your kind of place, we’d love to have you on the team! Why You’ll Love Working Here • Earn extra with tip share (up to $2/hour), • 50% off delicious menu items, • Flexible schedules in a fun, team-focused environment, • Paid time off, medical, dental & vision benefits*, • 401(k) match (21+), • Employee Assistance Program, • Referral bonuses, • Fast-track opportunities for growth and leadership roles, • Free uniform *Eligibility based on tenure and hours worked What You’ll Do As a Guest Service Expert, you’ll create great experiences for every guest by: • Greeting guests with a friendly, positive attitude, • Taking accurate orders and handling payments, • Making menu recommendations and upselling when appropriate, • Keeping the dining area clean and welcoming, • Supporting your team in a fast-paced environment, • Ensuring every guest leaves satisfiedWhat We’re Looking For, • No experience needed—we provide training, • Must be at least 16 years old, • Strong communication and teamwork skills, • Ability to stand for long periods and lift up to 25 lbs, • Availability for flexible hours, including nights, weekends, and holidays, • Commitment to food safety and company standards All applicants and employees have an equal opportunity for employment and advancement within Smashburger. Smashburger is dedicated to the principles of equal employment opportunity. We prohibit unlawful discrimination against applicants, prospective applicants, or employees on the basis of age 40 and over, race, sex, color, religion, national origin, disability, genetic information, sexual orientation, gender identity, military or veteran status, or any other applicable status protected by state or local law. This prohibition includes unlawful harassment based on any of these protected classes. Unlawful harassment includes verbal or physical conduct which has the purpose or effect of substantially interfering with an individual’s work performance or creating an intimidating, hostile, or offensive work environment. We maintain a workplace free of racial slurs and bias. This policy applies to all employees, including managers, supervisors, co-workers, and non-employees such as customers, clients, vendors, consultants, etc. Any conduct in violation of these company policies is also a violation of the law. Employees who engage in, ratify, or perpetuate discrimination, harassment or retaliation will be subject to disciplinary action, up to and including immediate discharge. https://smashburger.com/job-applicant-privacy-policy We use eVerify to confirm U.S. Employment eligibility.

Job Description At Smashburger, we don’t just make burgers—we create crave-worthy moments that keep guests coming back for more. We’re driven by a shared commitment to excellence, working as one team and taking bold action to deliver unforgettable experiences. Here, you’ll be part of a group that works hard and genuinely cares—where passion and dedication matter just as much as skill. At Smashburger, we live by our values: Taste Obsessed – Bring flavor into every shift Premium Experience – Lead Boldly. Deliver Flawlessly Stay Hungry – Literally & Figuratively One Team! One Smash! – Smash Together Do What’s Right – Act with honesty and consistency. If this sounds like your kind of place, we’d love to have you on the team! Why You’ll Love Working Here • Earn extra with tip share (up to $2/hour), • 50% off delicious menu items, • Flexible schedules in a fun, team-focused environment, • Paid time off, medical, dental & vision benefits*, • 401(k) match (21+), • Employee Assistance Program, • Referral bonuses, • Fast-track opportunities for growth and leadership roles, • Free uniform *Eligibility based on tenure and hours worked What You’ll Do As a Guest Service Expert, you’ll create great experiences for every guest by: • Greeting guests with a friendly, positive attitude, • Taking accurate orders and handling payments, • Making menu recommendations and upselling when appropriate, • Keeping the dining area clean and welcoming, • Supporting your team in a fast-paced environment, • Ensuring every guest leaves satisfiedWhat We’re Looking For, • No experience needed—we provide training, • Must be at least 16 years old, • Strong communication and teamwork skills, • Ability to stand for long periods and lift up to 25 lbs, • Availability for flexible hours, including nights, weekends, and holidays, • Commitment to food safety and company standards All applicants and employees have an equal opportunity for employment and advancement within Smashburger. Smashburger is dedicated to the principles of equal employment opportunity. We prohibit unlawful discrimination against applicants, prospective applicants, or employees on the basis of age 40 and over, race, sex, color, religion, national origin, disability, genetic information, sexual orientation, gender identity, military or veteran status, or any other applicable status protected by state or local law. This prohibition includes unlawful harassment based on any of these protected classes. Unlawful harassment includes verbal or physical conduct which has the purpose or effect of substantially interfering with an individual’s work performance or creating an intimidating, hostile, or offensive work environment. We maintain a workplace free of racial slurs and bias. This policy applies to all employees, including managers, supervisors, co-workers, and non-employees such as customers, clients, vendors, consultants, etc. Any conduct in violation of these company policies is also a violation of the law. Employees who engage in, ratify, or perpetuate discrimination, harassment or retaliation will be subject to disciplinary action, up to and including immediate discharge. https://smashburger.com/job-applicant-privacy-policy We use eVerify to confirm U.S. Employment eligibility.

Job DescriptionDescription: Now Hiring Immediately | Full-Time & Part-Time | All Shifts Available Love good food, fast energy, and a team that actually makes work fun? Wingstop is looking for cashiers who bring great vibes, a sharp eye for detail, and a genuine passion for taking care of people. You're the first face our guests see, and the last impression they leave with. That matters to us, and we make sure you feel valued for it. What You'll Earn • $16/hour to start, • Employee discount (yes, on the wings), • Referral program bonus — get paid to bring in people you actually want to work with Your Benefits Package • Medical, dental, and vision insurance, • 401(k), • Paid training — no experience needed, we'll teach you everything, • Flexible scheduling built around your life What You'll Be Doing You'll own the front-of-house experience, greeting guests, taking orders in-person and by phone, processing transactions, and making sure every order that goes out is right. You'll work closely with the kitchen crew to keep things moving, handle customer questions and complaints like a pro, and keep your register balanced and your station clean. Fast-paced? Yes. Boring? Never. Requirements: You don't need a résumé full of experience, you need energy, reliability, and a people-first attitude. If you can stay cool under pressure, communicate clearly, and take pride in doing things the right way, you'll fit right in. Restaurant or cashier experience is a plus, and a Food Handler Certification is required (or must be obtained before your first shift). Room to Grow Wingstop promotes from within. The skills you build here, customer service, cash handling, team communication, problem-solving under pressure, open doors. If you want to move into a lead or management role, we'll support that journey from day one. Come Be Part of Something Good Our team works hard, looks out for each other, and genuinely has fun doing it. If that sounds like your kind of environment, we want to hear from you. Apply today — we're hiring now.

About Eos Energy Enterprises \n Eos Energy Enterprises, Inc. is accelerating the shift to American energy independence with positively ingenious solutions that transform how the world stores power. Our breakthrough Znyth™ aqueous zinc battery was designed to overcome the limitations of conventional lithium-ion technology. It is safe, scalable, efficient, sustainable, manufactured in the U.S., and the core of our innovative systems that today provides utility, industrial, and commercial customers with a proven, reliable energy storage alternative for 3 to 12-hour applications. Eos was founded in 2008 and is headquartered in Edison, New Jersey. For more information about Eos (NASDAQ: EOSE), visit eose.com. \n \n Overall Job Summary: \n The Electrical Systems Engineer is responsible for the design, integration, testing, and support of communications, uninterruptible power supply (UPS), auxiliary power, and related electrical systems. This role ensures system reliability, regulatory compliance, and successful deployment by collaborating with cross-functional teams throughout the project lifecycle. The engineer provides technical expertise in system architecture, power distribution, equipment integration, troubleshooting, and commissioning activities to support critical infrastructure and operational requirements. \n Job Responsibilities: \n\n • Design, integrate, and support communications, UPS, auxiliary power, and related electrical systems to meet project, customer, and regulatory requirements.\n, • Develop engineering deliverables including system architectures, single-line diagrams, wiring schematics, interface documentation, and technical specifications.\n, • Perform electrical analyses, equipment selection, and system sizing for power distribution, battery backup, UPS, and communications infrastructure.\n, • Coordinate with internal teams, customers, contractors, and vendors to ensure successful system integration and project execution.\n, • Lead troubleshooting, root cause analysis, and resolution of electrical, communications, and system integration issues during design, installation, and operation.\n, • Develop and execute testing, validation, commissioning, Factory Acceptance Testing (FAT), and Site Acceptance Testing (SAT) activities to verify system performance in partnership with Product teams\n, • Ensure compliance with applicable electrical codes, industry standards, safety requirements, and quality processes.\n, • Prepare and maintain engineering documentation, reports, configurations, and as-built records throughout the project lifecycle.\n\n Education/Experience: \n\n • Bachelor’s degree in electrical engineering or related discipline required\n, • Minimum 5 years of experience\n\n Skills/Abilities: \n\n • Experience with communications, UPS, battery backup, and auxiliary power systems.\n, • Ability to read and interpret electrical drawings, schematics, and technical documentation.\n, • Knowledge of electrical codes, standards, and engineering best practices.\n, • Strong troubleshooting, analytical, and problem-solving skills.\n, • Excellent written and verbal communication skills.\n, • Experience with critical infrastructure, transportation, utility, industrial, or telecommunications environments.\n, • Familiarity with SCADA, network communications, fiber optic systems, or industrial control systems.\n, • Experience supporting commissioning, field testing, and startup activities.\n, • Knowledge of AutoCAD, MicroStation, ETAP, SKM, or similar engineering software.\n\n Travel \n\n • Overnight/North America: 10-25%\n\n Working Conditions \n\n • Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 25 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.\n, • Factory - The worker may be subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, vibration, moving vehicles, electrical current, exposure to temperature changes or exposure to chemicals. While performing the duties of this job, the employee may be exposed to fumes, airborne particles, odors, dust, mists, and gases. The noise level in the work environment can be loud. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Machinery operation requires the use of safety equipment to include but not limited to eye safety glasses, hearing protectors, work boots, and lab coats. May be required to exert up to 50 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.\n\n

License Required A World-Class Team BJ’s Wholesale Club is powered by more than 30,000 team members who make a real impact every day. Whether you're stocking shelves, solving problems or shaping strategy, your work helps families save on what matters most. We’re a team built on purpose and opportunity. Join us and be part of something meaningful. Why You’ll Love Working at BJ’s At BJ’s Wholesale Club, our team members are at the heart of everything we do. That’s why we offer a comprehensive benefits package designed to support your health, well-being and future – both on and off the job. When you grow, we grow. Here’s just some of what you can look forward to: • Weekly Pay: Get paid every week so that you can manage your money on your terms., • Daily Pay: Access your earned pay before payday, giving you more flexibility when you need it. (fee may apply.), • Free BJ’s Memberships: Enjoy a complimentary The Club Card Membership, plus a free Supplemental Membership for someone in your household.*, • Generous Paid Time Off: Take the time you need with vacation, personal, sick days, holidays, bereavement, and jury duty leave.*, • Flexible and Affordable Health Benefits: Choose from three medical plans, and access optional dental, vision, Health Savings Account (HSA), and flexible spending account options to fit your lifestyle.*, • 401(k) Retirement Savings Plan: Build your financial future with a company match (available to team members 18 and older).*, • Employee Stock Purchase Plan: Accumulate funds through after-tax payroll deductions that can be used to purchase shares of BJ’s common stock at a 15% discount.* *Eligibility requirements vary by position. Job Summary Responsible for dispensing spectacles and other optical products, to both adults and children, working with prescriptions written by optometrists and ophthalmologists. This position advises and assists patients with various types of lenses and spectacle frames, including style, weight, and color. The pay range advertised for this position does not include additional compensation paid out through our spiff program. Team Members: • Carry out job functions and responsibilities as assigned. Support the application of club policies, procedures, and compliance., • Strives for flawless execution and hold ourselves accountable., • Acts with honesty and integrity and lead with the member in mind to address all concerns and to escalate any concerns, as appropriate., • Ensure a safe and positive environment for our members and each other., • Embrace inclusion and diversity, by working together with collaboration and respect. Work as a team to achieve goals., • Move with speed and agility in everything we do., • Innovate and adapt so we can move as fast as the world around us., • Maintain a friendly and positive attitude. Members: • Deliver service excellence through all points of contact., • Resolve and deescalate to address every member concern., • Ensure a safe and positive environment and experience for the members., • Daily commitment to GOLD Member Standards, • Greet, Anticipate, Appreciate (GAA), • Fast, Friendly Full, Fresh, Clean Club Standards: Work as a team to deliver GOLD club standards daily. • Work with commitment and pride to deliver GOLD- Grand opening look daily., • All items stocked and planograms executed., • Maintain visible accurate signage., • Clean and organized, inside and out. Know your Business: • Understand how to access and read production and/or financial performance reporting for your department., • See the connection between consistent execution and the positive impact it can have on the business. Major Tasks, Responsibilities, and Key Accountabilities • Verifies order data entry, compares Rx to original Rx provided from the doctor assuring all information entered in the system is accurate. Completes proper order filing procedures, including filing the order under the correct ABC system in the store., • Delivers sales by providing excellent Member service in person and over the phone. Must be able to explain in detail all procedures included under the exam fee; being open and honest in communication and maintaining a friendly pleasant demeanor with customers at all times., • Takes measurements, assures correct frame selection for Rx power, reads prescriptions on the lensometer, timely notification of product readiness and advancement of the order in the system: including received, notified, and dispense of each job and proper handling of all money related transactions., • Strives to deliver sales and metric goals by educating patients on the benefits of available products, and by recommending those that will improve their visual needs., • Spends downtime engaging with members in front of Optical., • Adheres to all privacy and confidential/proprietary company policies and procedures (i. e. Health Information Portability and Accountability Act, known as HIPAA) as required by law. Provides support to Members in making eyeglass adjustments and repairs., • Assists Optical Manager with the opening and closing procedures at the beginning and end of shift. Ensures that accurate funds are collected, and payments are made at the point of service., • Maintains all club policies and procedures., • Performs other duties as assigned., • Regular, predictable, full attendance is an essential function of this job. Qualifications • Must be licensed to work as an optician within the State and keep license up to date and active., • Knowledge of optical products and business practices preferred., • High school diploma, college degree, and/or big box wholesale, retail, and/or optical experience is preferred., • Strong interpersonal skills, organizational skills and an attention to detail required., • Open shift availability required for full time positions., • At least 18 years of age. Environmental Job Conditions • Most of the time is spent moving about frequently on hard surfaces. There may be a need to occasionally position oneself to examine or scan merchandise, including bending, handling, pulling, reaching, and/or stooping., • Frequently requires lifting objects up to 50 pounds. May require lifting and moving heavy and/or awkward objects more than 50 pounds with assistance., • Located in a comfortable indoor area with frequent exposure to temperature extremes and loud noises. There may be occasional exposure to cleaning agents., • Requires the use of Optical hand tools to adjust and repair Members’ eyeglasses, which includes the insertion and removal of nose pads and small screws. In accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is $28.00 - $34.25 We recognize the growing role of AI tools, including ChatGPT, and value familiarity with them. That said, we want to hear from your authentic self. Your application should reflect your own skills, experiences, and insights rather than AI-generated responses.

Job Description **Position name :: Production Worker ** **Duration :: 06 months ** **Location :: 1000 Liddle Ave, Edison, NJ 08837 ** **Hours: 2nd shift 2pm-11:30pm ** **Qualifications: ** **JOB TITLE: Cut and Curl and Trimmer / Flippers and PVC TRIMMER ** ** ** **$18/hour, ** This is a production position working to ensure safe work practices while producing quality products. The job requires that the employee be able to work safely and follow safety rules. Employee must be dependable, able to follow instructions and directions, according to established operating procedures. The job requires working frequently around and with heavy machinery with moving mechanical parts, and mobile equipment. The environment is not climate controlled, and employees must be able to work in environments that may be extremely hot and or cold depending upon the operation and the season. The environment may be dirty from oils/grease and may be noisy from the machinery. Employees are required to always wear personal protective equipment. PPE includes steel-toed shoes, ear protection, eye protection, gloves and high visibility clothing. • High school diploma or GED, • Flexible in work and assignments, • Ability to work in a team-based environment, • Effective interpersonal and communication skills, • The ability to work effectively in a fast-paced environment in a safe manner, • Demonstrated ability to handle multiple priorities during a day **Responsibilities: ** **The following are the skill levels in natural progression. ** **All levels are responsible for the following duties: ** • Supports and promotes safe practices and environmental commitments in alignment with company commitments, policies, and compliance requirements, • Show initiative in supporting plant wide safety. Participate in committees as required, • Wears all required and proper PPE, • Use safe work practices, and reports hazardous conditions to supervisor, • Complete computer-based training and all other programs needed to stay in compliance with company policy’s, • Ensures that all Housekeeping & 5S areas of responsibility have been completed before end of shift and keeps equipment, work areas and other prescribed areas clean and orderly at all times, • Monitors and reports equipment conditions **Level 1 (PVC Trimmer Helper) ** • Take Off – Remove formed/molded PVC fittings from table saw and place them in trim area or aside as needed, • Flip the PVC fittings at the table, • Trimming PVC fittings with hand scissors to the correct length, • Converts fittings to meet established specifications, • Reports equipment malfunctions, operation delays, or product defects immediately to supervisor or leader, • FG sorting & knowledge of bundling chart, • Prepares production reports as directed or required, • Receives and follows verbal and written instructions from supervisor or lead, • Other duties as assigned **Level 2 ** • Performs all Level 1 (PVC Trimmer Helper) duties, • Performs flipping online (TSL & Brown machines), • Knowledge of fitting storage locations, • Use of end cap cutter, • Other duties as assigned **Level 3 ** • Performs all Level 1 & Level 2 duties, • Trains & instructs the less experienced Trimmers as required, • Qualified for use of Safety Saw to trim & cut fittings, • Qualified & demonstrated ability to perform full rotation, • Cross Trained in 300 Room (gluing, trimming, etc.), • Other duties as assigned You should be proficient in: • hand tools, • power tools

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at cornerstonebuildingbrands.com. Job Description 1st Shift Monday-Friday 7:00 A.M.-3:30 P.M. 17.25 Per Hour The Extrusion packer is responsible for inspecting, packing, labeling, and preparing extruded products for shipment while maintaining safety, quality, and production standards. This role supports efficient operation of the extrusion production line by ensuring finished products meet customer specifications and company requirements. Duties and responsibilities • Inspect extruded products for defects and overall quality., • Pack finished products according to customer specifications, packaging instructions, and company standards., • Apply labels and product identification accurately., • Ensure correct quantities are packed and documented., • Monitor product appearance and promptly report quality concerns to the operator, team lead, or supervisor., • Maintain a clean and organized work area in accordance with 5S., • Follow all safety procedures, including proper use of personal protective equipment (PPE)., • Assist with material handling, palletizing, wrapping, and moving finished goods., • Work effectively with extrusion operators, quality personnel, and team members to achieve production goals., • Identify and communicate equipment, product, or safety issues to supervision., • Perform other related duties as assigned.Qualifications, • High School Diploma or equivalent preferred., • Previous manufacturing, warehouse, or packing experience preferred., • Ability to read and understand work instructions, labels, and production documentation., • Basic math skills for counting, measuring, and recording production data., • Ability to work in a fast-paced manufacturing environment., • Strong attention to detail and committed to quality. Physical Requirements • Stand and walk for extended periods., • Frequently bend, reach, lift, and move materials., • Ability to lift up to 50 pounds., • Ability to work safely around production equipment and machinery. Additional Information Site Location: 1 Silverline Dr. North Brunswick Township, NJ 08902 All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Maintenance leadership in manufacturing; strong industrial electrical/mechanical troubleshooting; PLC/controls; pneumatics/hydraulics; CMMS and preventive maintenance; team development; safety compliance; third-shift availability. Food or packaging experience preferred. \n \n Lead third-shift maintenance of mechanical and robotic production equipment. This position combines approximately 70% hands-on work with 30% desk-based responsibilities. \n Responsibilities \n • Plan and coordinate maintenance and repairs to meet production requirements and reduce downtime. • Provide hands-on technical support during breakdowns. • Manage preventive maintenance using PRISMA and coordinate repair schedules with operations and mechanics. • Assign priorities, work and resources; ensure technicians have materials, tools, drawings and inspection gauges. • Support hydraulic, pneumatic, electrical and mechanical repairs. • Develop daily, weekly and monthly schedules within budget and recommend equipment investments. • Train, coach and evaluate employees, including performance reviews and disciplinary processes when needed. • Coordinate with other departments to improve safety, compliance, quality, output and cost. • Follow company safety policies and GMP, complete mandatory food-safety training, and recognize and address food-safety hazards. \n Qualifications \n • Bachelor’s degree in Engineering or a related field, or equivalent experience. • At least five years of electromechanical or maintenance supervisor experience in heavy industry or food manufacturing. • Working knowledge of Word, Excel, production/maintenance reporting software and CMMS. • Ability to read mechanical, structural and electrical drawings. • Good working knowledge of SQF requirements and safe food handling. • Ability and willingness to work in noisy, dusty, non-air-conditioned or unheated manufacturing areas and in high and low temperatures indoors and outdoors. • Commitment to promoting and enforcing safe work practices. • Availability for third shift.

\n Uniti Med is seeking a travel Registered Respiratory Therapist for a travel job in New Brunswick, New Jersey. Job Description & Requirements\n \n • Specialty: Registered Respiratory Therapist\n, • Discipline: Allied Health Professional\n, • Start Date: 11/09/2026\n, • Duration: 13 weeks\n, • 36 hours per week\n, • Shift: 12 hours, nights\n, • Employment Type: Travel\n \n \n Benefits: \n \n • Day 1 Insurance \n, • Cigna medical, MetLife dental and vision insurance \n, • License reimbursement for new licenses needed for each assignment \n, • Discounts with hotels and rental cars \n, • A dedicated recruiter and support team that will help you every step of the way to sure you start on time and have an exceptional experience \n, • Referral bonus up to $700 \n \n About the Company: \n Finding the right role is about more than just matching skills to a job—it’s about aligning with your goals, values, and the way you want to work. \n As an award-winning talent partner, we support healthcare professionals through every step of that process, offering meaningful opportunities, clear guidance, and long-term partnership. From our first conversation to your first day on the job (and beyond!), we’re here to help you move forward with confidence. \n \n Uniti Med Job ID #867199. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Respiratory Therapist About Uniti Med\n \n Uniti Med meticulously matches your talents to our open needs to ensure the ultimate travel experience. Tell us where you want to go and let our experienced staff lead the way! \n Benefits\n \n • Referral bonus\n, • Benefits start day 1\n, • Employee assistance programs\n \n

\n Medical Solutions Allied is seeking a local contract Cath Lab Technologist for a local contract job in Perth Amboy, New Jersey. Job Description & Requirements\n \n • Specialty: Cath Lab Technologist\n, • Discipline: Allied Health Professional\n, • Duration: 13 weeks\n, • 40 hours per week\n, • Shift: 10 hours, days\n, • Employment Type: Local Contract\n \n \n We’re seeking talented healthcare professionals whose adventure game is as strong as their clinical game. Those that want flexibility and high pay, we have the positions for you! \n Some of the industry-leading benefits enjoyed by Medical Solutions travel nurses and travel allied healthcare professionals include: \n \n • Day One Medical, Dental, and Vision with low premiums\n, • Day One 401(k) with Company Contribution\n, • Personalized Compensation Packages\n, • Paid, Private, Fully Furnished, Pet-Friendly Housing\n, • Dedicated Recruiter and 24/7 Customer Care Line\n, • Per Diem Allowance and Paid Travel\n, • Licensure and Certification Reimbursement\n, • Free Liability Coverage\n, • Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident, and Pet Insurance\n, • Equal Employment Opportunity\n, • And More!\n \n Estimated pay package based on bill rate at time job was posted. Bill rates can change frequently and without notice. Exact pay package may vary based on guaranteed hours, distance being traveled, and customizations available for travelers. Great facility in NJ is looking for some help in their Cath Lab. They are in need of a Certified Technician to work 10 hour days on this 12 week assignment, Please contact Medical Solutions at for more information.\n \n Medical Solutions Allied Job ID #1191949L. Posted job title: Cardiac Cath Lab About Medical Solutions Allied\n \n At Medical Solutions, we’re people who care, helping people who care. No matter how you look at it, there’s a whole lot of care going on in our world and that’s just the way we like it. What do we do? Medical Solutions is one of the nation’s largest providers of total workforce solutions in the healthcare industry, connecting nurses and allied health clinicians with hospitals and healthcare systems across the country and around the corner. Through our family of brands, we also serve a segment of clients outside of the healthcare space. And we’re the very best at what we do. You’ll love our culture that’s filled with heart and soul. As a company and employer, we’re sincerely and unabashedly us. We lead as humans first and believe the unique qualities of each team member make us better together. We share a purpose for helping others and the drive to make a difference. And we offer endless opportunities for personal and professional growth, throughout your career. At Medical Solutions, you’ll find a great place to work and a career home. We’ve received Best Places to Work awards, landed top industry awards, and received accolades for the impact we’ve made in business and within our community. But the only way to really get to know us, is to join us. We think you’ll fit right in. \n Benefits\n \n • Discount program\n, • Life insurance\n, • Mileage reimbursement\n, • Company provided housing options\n, • License and certification reimbursement\n, • Benefits start day 1\n, • Continuing Education\n, • Guaranteed Hours\n, • Vision benefits\n, • Referral bonus\n, • 401k retirement plan\n, • Dental benefits\n, • Cancelation protection\n, • Weekly pay\n, • Medical benefits\n, • Employee assistance programs\n, • Wellness and fitness programs\n, • Pet insurance\n, • Holiday Pay\n \n

\n American Traveler is seeking a travel Nuclear Medicine Technologist for a travel job in New Brunswick, New Jersey. Job Description & Requirements\n \n • Specialty: Nuclear Medicine Technologist\n, • Discipline: Allied Health Professional\n, • Start Date: 12/21/2026\n, • Duration: 13 weeks\n, • 40 hours per week\n, • Shift: 10 hours, days\n, • Employment Type: Travel\n \n Assignment Overview\n \n • Shift: Days, 4x10hrs\n, • Hours: 40 hrs/wk\n, • Start Date: Dec 21, 2026\n, • Length: 13 weeks\n, • Openings: 1\n Description\n American Traveler is hiring a Nuclear Medicine & CT Technologist requiring dual certification in both Nuclear Medicine and CT, with nuclear cardiology experience required. Details\n \n • Outpatient adult imaging center setting\n, • Approximately 6-8 cases per technologist per day\n, • Procedures include pulmonary (lung scan perfusion, ventilation/perfusion), myocardial (exercise/rest single and multiple, pharmacological stress), bone/renal (3 phase, limited, whole body bone scans, captopril renal flow), GI/thyroid/liver (gastric emptying, I-123 uptake scan, liver imaging), and SPECT (bone, thyroid, cardiac imaging)\n, • Uses EPIC for charting\n, • 4x10 hour day shifts from 7:30 AM to 6:00 PM\n, • No weekend or on-call requirements\n, • Candidates must float within their skillset without exception\n Requirements\n \n, • Minimum 2 years of experience with nuclear cardiology experience required\n, • BLS certification required\n, • NMT credential: ARRT(N) or CNMT\n, • CT credential: ARRT(CT), NMTCB(CT), or R.T.(R)(CT)(ARRT), or R.T.(N)(CT)(ARRT) to satisfy both requirements\n, • License required if applicable\n, • Pending NJ license accepted at time of submission\n, • Trauma Level I and II experience preferred\n, • Management/lead experience preferred\n, • PET scan and pediatric experience preferred\n Additional Information\n \n, • Perform a wide range of nuclear medicine and CT imaging procedures across pulmonary, cardiac, bone, renal, GI, thyroid, and liver studies\n, • Any color scrubs permitted\n, • No winter holiday coverage requirement\n, • First-time travelers will be considered\n, • Local candidates accepted at the same rate\n, • Former employees of this health system must be separated for at least 1 year before returning as a travel clinician\n \n \n American Traveler Job ID #P-771715. Pay package is based on 10 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Travel Nuclear Medicine Technologist - Nuclear Medicine About American Traveler\n \n With over 25 years of experience, American Traveler has established a reputation for outstanding customer service. Our team ensures a smooth, worry-free experience for those starting on or expanding their travel nursing and allied careers. \n With thousands of travel nursing and allied jobs nationwide, our attentive and approachable recruiters find positions that align perfectly with your career aspirations and personal requirements. \n American Traveler offers exceptional benefits, including premium medical, dental, vision and life insurance beginning day one of your assignment, generous 401(k) match, substantial housing stipends, and more. Additionally, with 24/7 support and access to our in-house clinicians, you are assured confidence and comfort throughout your assignment. \n With our team behind you, you can relax and enjoy a rewarding travel career. \n \n \n

\n Medical Solutions Allied is seeking a local contract Nuclear Medicine Technologist for a local contract job in Plainfield, New Jersey. Job Description & Requirements\n \n • Specialty: Nuclear Medicine Technologist\n, • Discipline: Allied Health Professional\n, • Duration: 13 weeks\n, • 40 hours per week\n, • Shift: 8 hours, days\n, • Employment Type: Local Contract\n \n \n We’re seeking talented healthcare professionals whose adventure game is as strong as their clinical game. Those that want flexibility and high pay, we have the positions for you! \n Some of the industry-leading benefits enjoyed by Medical Solutions travel nurses and travel allied healthcare professionals include: \n \n • Day One Medical, Dental, and Vision with low premiums\n, • Day One 401(k) with Company Contribution\n, • Personalized Compensation Packages\n, • Paid, Private, Fully Furnished, Pet-Friendly Housing\n, • Dedicated Recruiter and 24/7 Customer Care Line\n, • Per Diem Allowance and Paid Travel\n, • Licensure and Certification Reimbursement\n, • Free Liability Coverage\n, • Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident, and Pet Insurance\n, • Equal Employment Opportunity\n, • And More!\n \n Estimated pay package based on bill rate at time job was posted. Bill rates can change frequently and without notice. Exact pay package may vary based on guaranteed hours, distance being traveled, and customizations available for travelers. \n \n Medical Solutions Allied Job ID #1153178L. Posted job title: Nuclear Medicine About Medical Solutions Allied\n \n At Medical Solutions, we’re people who care, helping people who care. No matter how you look at it, there’s a whole lot of care going on in our world and that’s just the way we like it. What do we do? Medical Solutions is one of the nation’s largest providers of total workforce solutions in the healthcare industry, connecting nurses and allied health clinicians with hospitals and healthcare systems across the country and around the corner. Through our family of brands, we also serve a segment of clients outside of the healthcare space. And we’re the very best at what we do. You’ll love our culture that’s filled with heart and soul. As a company and employer, we’re sincerely and unabashedly us. We lead as humans first and believe the unique qualities of each team member make us better together. We share a purpose for helping others and the drive to make a difference. And we offer endless opportunities for personal and professional growth, throughout your career. At Medical Solutions, you’ll find a great place to work and a career home. We’ve received Best Places to Work awards, landed top industry awards, and received accolades for the impact we’ve made in business and within our community. But the only way to really get to know us, is to join us. We think you’ll fit right in. \n Benefits\n \n • Discount program\n, • Life insurance\n, • Mileage reimbursement\n, • Company provided housing options\n, • License and certification reimbursement\n, • Benefits start day 1\n, • Continuing Education\n, • Guaranteed Hours\n, • Vision benefits\n, • Referral bonus\n, • 401k retirement plan\n, • Dental benefits\n, • Cancelation protection\n, • Weekly pay\n, • Medical benefits\n, • Employee assistance programs\n, • Wellness and fitness programs\n, • Pet insurance\n, • Holiday Pay\n \n

\n Medical Solutions Allied is seeking a local contract CT Technologist for a local contract job in Edison, New Jersey. Job Description & Requirements\n \n • Specialty: CT Technologist\n, • Discipline: Allied Health Professional\n, • Duration: 11 weeks\n, • 40 hours per week\n, • Shift: 8 hours, evenings\n, • Employment Type: Local Contract\n \n \n We’re seeking talented healthcare professionals whose adventure game is as strong as their clinical game. Those that want flexibility and high pay, we have the positions for you! \n Some of the industry-leading benefits enjoyed by Medical Solutions travel nurses and travel allied healthcare professionals include: \n \n • Day One Medical, Dental, and Vision with low premiums\n, • Day One 401(k) with Company Contribution\n, • Personalized Compensation Packages\n, • Paid, Private, Fully Furnished, Pet-Friendly Housing\n, • Dedicated Recruiter and 24/7 Customer Care Line\n, • Per Diem Allowance and Paid Travel\n, • Licensure and Certification Reimbursement\n, • Free Liability Coverage\n, • Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident, and Pet Insurance\n, • Equal Employment Opportunity\n, • And More!\n \n Estimated pay package based on bill rate at time job was posted. Bill rates can change frequently and without notice. Exact pay package may vary based on guaranteed hours, distance being traveled, and customizations available for travelers. \n \n Medical Solutions Allied Job ID #1165699L. Posted job title: CT (Computed Tomography) About Medical Solutions Allied\n \n At Medical Solutions, we’re people who care, helping people who care. No matter how you look at it, there’s a whole lot of care going on in our world and that’s just the way we like it. What do we do? Medical Solutions is one of the nation’s largest providers of total workforce solutions in the healthcare industry, connecting nurses and allied health clinicians with hospitals and healthcare systems across the country and around the corner. Through our family of brands, we also serve a segment of clients outside of the healthcare space. And we’re the very best at what we do. You’ll love our culture that’s filled with heart and soul. As a company and employer, we’re sincerely and unabashedly us. We lead as humans first and believe the unique qualities of each team member make us better together. We share a purpose for helping others and the drive to make a difference. And we offer endless opportunities for personal and professional growth, throughout your career. At Medical Solutions, you’ll find a great place to work and a career home. We’ve received Best Places to Work awards, landed top industry awards, and received accolades for the impact we’ve made in business and within our community. But the only way to really get to know us, is to join us. We think you’ll fit right in. \n Benefits\n \n • Discount program\n, • Life insurance\n, • Mileage reimbursement\n, • Company provided housing options\n, • License and certification reimbursement\n, • Benefits start day 1\n, • Continuing Education\n, • Guaranteed Hours\n, • Vision benefits\n, • Referral bonus\n, • 401k retirement plan\n, • Dental benefits\n, • Cancelation protection\n, • Weekly pay\n, • Medical benefits\n, • Employee assistance programs\n, • Wellness and fitness programs\n, • Pet insurance\n, • Holiday Pay\n \n

\n Uniti Med is seeking a travel Respiratory Therapist for a travel job in New Brunswick, New Jersey. Job Description & Requirements\n \n • Specialty: Respiratory Therapist\n, • Discipline: Allied Health Professional\n, • Start Date: 11/02/2026\n, • Duration: 13 weeks\n, • 36 hours per week\n, • Shift: 12 hours, days\n, • Employment Type: Travel\n \n \n Benefits: \n \n • Day 1 Insurance \n, • Cigna medical, MetLife dental and vision insurance \n, • License reimbursement for new licenses needed for each assignment \n, • Discounts with hotels and rental cars \n, • A dedicated recruiter and support team that will help you every step of the way to sure you start on time and have an exceptional experience \n, • Referral bonus up to $700 \n \n About the Company: \n Finding the right role is about more than just matching skills to a job—it’s about aligning with your goals, values, and the way you want to work. \n As an award-winning talent partner, we support healthcare professionals through every step of that process, offering meaningful opportunities, clear guidance, and long-term partnership. From our first conversation to your first day on the job (and beyond!), we’re here to help you move forward with confidence. \n \n Uniti Med Job ID #864762. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: EEG Tech About Uniti Med\n \n Uniti Med meticulously matches your talents to our open needs to ensure the ultimate travel experience. Tell us where you want to go and let our experienced staff lead the way! \n Benefits\n \n • Referral bonus\n, • Benefits start day 1\n, • Employee assistance programs\n \n

\n Uniti Med is seeking a travel Nuclear Medicine Technologist for a travel job in New Brunswick, New Jersey. Job Description & Requirements\n \n • Specialty: Nuclear Medicine Technologist\n, • Discipline: Allied Health Professional\n, • Start Date: 12/21/2026\n, • Duration: 13 weeks\n, • 36 hours per week\n, • Shift: 12 hours, days\n, • Employment Type: Travel\n \n \n Benefits: \n \n • Day 1 Insurance \n, • Cigna medical, MetLife dental and vision insurance \n, • License reimbursement for new licenses needed for each assignment \n, • Discounts with hotels and rental cars \n, • A dedicated recruiter and support team that will help you every step of the way to sure you start on time and have an exceptional experience \n, • Referral bonus up to $700 \n \n About the Company: \n Finding the right role is about more than just matching skills to a job—it’s about aligning with your goals, values, and the way you want to work. \n As an award-winning talent partner, we support healthcare professionals through every step of that process, offering meaningful opportunities, clear guidance, and long-term partnership. From our first conversation to your first day on the job (and beyond!), we’re here to help you move forward with confidence. \n \n Uniti Med Job ID #866786. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Nuclear Med Tech About Uniti Med\n \n Uniti Med meticulously matches your talents to our open needs to ensure the ultimate travel experience. Tell us where you want to go and let our experienced staff lead the way! \n Benefits\n \n • Referral bonus\n, • Benefits start day 1\n, • Employee assistance programs\n \n

Annual Salary: $60,000-65,000k plus commission The pay listed is the salary range for this position. Any specific offer will vary based on the successful applicant’s education, experience, skills, abilities, geographic location, and alignment with market data. You may be eligible to participate in a Company incentive or bonus program. Shift: Typical hours are Monday-Friday, 8:00am-5:00pm and Emergencies and Weekends as needed. Territory: This Area Manager position is 100% travel within area of State of New Jersey for site visits at banking facilities between various locations and emergencies (as needed). Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit _. Position Summary: The Area Manager is responsible for the day-to-day operation and administrative activities to ensure conformance to contract requirements. Develops and implements cost control measures and level of service standards to ensure compliance with customer specifications / contract requirements for assigned building. Oversees inspections, quality control measures, and the inventory control of equipment and supplies for the assigned building. This Area Manager position is 100% travel within area of the state of New Jersey for site visits at banking facilities between various locations and emergencies (as needed). • Ensure that services are performed as contracted and at the intended profit margins., • Troubleshoot potential problems and concerns., • Manage the company’s quality control monitoring and safety programs at the assigned buildings., • Conduct quality of service inspections at assigned buildings., • Attempt to increase revenue by ensuring the Supervisors are looking for ways to provide additional or periodic services to the customers., • Ensure compliance with company policies and procedures and all federal, state, and local government regulations., • Ensure that all paperwork, including terminations, labor variance action plans, and operational model is complete and accurate and is submitted to the district/hub in a timely manner., • Analyze and manage, in a proactive manner, both the financial and the operational performance of the assigned buildings., • Ensure that payroll is accurate and submitted to the appropriate payroll personnel in a timely manner and, when applicable, correct any payroll discrepancies., • Manages and provides leadership to Supervisors, and Lead personnel assigned to the buildings., • Responsible for the overall direction, coordination, and evaluation of personnel within the assigned building. Carry out supervisory responsibilities in accordance with the company’s policies and applicable laws., • Responsibilities include directing work; appraising performance; rewarding and disciplining employees; addressing complaints, resolving problems, and terminating employees., • Associates degree is preferred or equivalent experience is required., • Minimum of three (3) years of supervisory experience in a janitorial service oriented environment., • Experience in cost estimating/pricing work., • Have a working knowledge of OSHA safety regulations and chemical handling/storage procedures., • Must be able to write reports and business correspondence and effectively present information and respond to questions from managers and customers., • Must have a valid State issued driver’s license 100% travel within area of the state of New Jersey for site visits at banking facilities between various locations and emergencies (as needed). About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit http://www.abm.com. ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at http://www.abm.com/ ABM does not accept unsolicited resumes.

Job Description About Children’s Specialized ABA Children’s Specialized ABA is part of the Children’s Specialized Hospital Autism Center of Excellence. We serve children with ASD by combining clinical innovation, whole-child care, and personalized therapy. • At Children’s Specialized ABA, we envision a future where every child diagnosed with autism has access to innovative and compassionate care, empowering them to thrive and reach their full potential. Our vision is built on four core values:, • Inclusivity: We celebrate the diversity within the Autism spectrum and are committed to creating an inclusive environment that respects and values each person’s individual strengths and differences., • Innovation: We foster a culture of creativity and collaboration, exploring new ideas to develop personalized solutions that enhance quality of life for all children with Autism., • Connection: We actively engage with the health systems and broader community to coordinate services and care for people with Autism., • Quality and Safety: We invest in research and training to provide cutting-edge, effective, safe, and personalized services tailored to the unique needs of those we serve. Join Us as a Full-time Registered Behavior Technician (RBT) from 9:00AM-5:00PM As an RBT, you’ll provide one-on-one ABA therapy to children with Autism Spectrum Disorder (ASD), helping them build communication, social, and daily living skills while reducing challenging behaviors. You’ll work closely with a Board Certified Behavior Analyst (BCBA) and a collaborative care team to deliver high-quality, compassionate care. Not certified yet? We’ve got you covered — we provide paid training and cover the cost of your RBT exam to help you launch your career with confidence. What You'll Do: • Deliver individualized therapy sessions in-home or clinic-based, • Implement behavior acquisition and reduction plans, • Use electronic tools such as CentralReach to conduct preference assessments and track data., • Collaborate in clinical meetings and receive ongoing feedback and supervision, • Maintain program books and develop teaching materials, • Communicate progress to parents and caregivers, • Provide basic care (e.g., toileting, eating) as needed What You'll Need: • Minimum age: 18 years, • High school diploma or equivalent, • Reliable transportation, • RBT certification is preferred, but not required — if you're positive, motivated, and eager to learn, we’ll provide the training and support to help you succeed., • Prior experience working with children—ASD experience strongly preferred, • Ability to commit to a consistent weekly schedule, • Physically able to perform job duties (e.g., kneeling, bending, lifting up to 40 lbs., moving with children) Work Location: This position will provide services in a clinical setting at our North Brunswick, NJ clinic. The role involves working on-site as part of a collaborative team, with access to supervision, peer support, and clinic-based resources in a structured environment. Shift Hours: We are seeking candidates who are available during the 9:00AM-5:00PM time block, 5 days per week. This role is expected to offer roughly 40 hours per week. Benefits & Perks for All Clinic Employees We believe in supporting our clinic employees—full-time and part-time—both professionally and personally. Here’s what you can expect when you join us: • Company-sponsored, best-in-class training to support earning your Registered Behavior Technician (RBT) credential, • (Includes exam cost coverage and a pay increase upon certification), • Weekly supervision and in-person BCBA support, • Free CEUs and fieldwork supervision for current or aspiring BCBA students, • Annual performance-based raises, • Increased hourly rate for bilingual (English/Spanish) candidates, • Clear pathways for advancement — whether toward Lead RBT roles or administrative opportunities (authorizations, scheduling, recruitment)., • Fun fact: some of our recruiters started as RBTs!, • Supportive, inclusive culture where your voice, ideas, and empathy are truly valued, • Accrued paid sick time (per eligibility), • Referral bonus program — help us grow the team and get rewarded, • Exclusive discounts on entertainment, travel, theme parks, and more Benefits Available for Eligible Employees (Full-time): • Medical, Dental, and Vision insurance, • 401(k) retirement plan, • Company-paid life insurance ($50,000 coverage), • Complimentary Employee Assistance Program (EAP), • A full suite of voluntary benefits to customize your coverage, • 9 company-paid holidays, • 10 days of PTO/sick time, accrued throughout the year Compensation The expected salary range for this role is $20–$27 per hour. Final compensation will be based on a range of factors, such as your skills, education, experience, certifications, market conditions, and internal equity. All offers are made in alignment with applicable federal and state laws. Children’s Specialized ABA provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description About Children’s Specialized ABA Children’s Specialized ABA is part of the Children’s Specialized Hospital Autism Center of Excellence. We serve children with ASD by combining clinical innovation, whole-child care, and personalized therapy. • At Children’s Specialized ABA, we envision a future where every child diagnosed with autism has access to innovative and compassionate care, empowering them to thrive and reach their full potential. Our vision is built on four core values:, • Inclusivity: We celebrate the diversity within the Autism spectrum and are committed to creating an inclusive environment that respects and values each person’s individual strengths and differences., • Innovation: We foster a culture of creativity and collaboration, exploring new ideas to develop personalized solutions that enhance quality of life for all children with Autism., • Connection: We actively engage with the health systems and broader community to coordinate services and care for people with Autism., • Quality and Safety: We invest in research and training to provide cutting-edge, effective, safe, and personalized services tailored to the unique needs of those we serve. Join Us as a Part-time Registered Behavior Technician (RBT) 5:00PM-7:00PM As an RBT, you’ll provide one-on-one ABA therapy to children with Autism Spectrum Disorder (ASD), helping them build communication, social, and daily living skills while reducing challenging behaviors. You’ll work closely with a Board Certified Behavior Analyst (BCBA) and a collaborative care team to deliver high-quality, compassionate care. Not certified yet? We’ve got you covered — we provide paid training and cover the cost of your RBT exam to help you launch your career with confidence. What You'll Do: • Deliver individualized therapy sessions in-home or clinic-based, • Implement behavior acquisition and reduction plans, • Use electronic tools such as CentralReach to conduct preference assessments and track data., • Collaborate in clinical meetings and receive ongoing feedback and supervision, • Maintain program books and develop teaching materials, • Communicate progress to parents and caregivers, • Provide basic care (e.g., toileting, eating) as needed What You'll Need: • Minimum age: 18 years, • High school diploma or equivalent, • Reliable transportation, • RBT certification is preferred, but not required — if you're positive, motivated, and eager to learn, we’ll provide the training and support to help you succeed., • Prior experience working with children—ASD experience strongly preferred, • Ability to commit to a consistent weekly schedule, • Physically able to perform job duties (e.g., kneeling, bending, lifting up to 40 lbs., moving with children) Work Location: This position will provide services in a clinical setting at our North Brunswick, NJ clinic. The role involves working on-site as part of a collaborative team, with access to supervision, peer support, and clinic-based resources in a structured environment. Shift Hours: We are seeking candidates who are available during the 5:00PM-7:00PM time block, 5 days per week. This role is expected to offer roughly 10 hours per week. Benefits & Perks for All Clinic Employees We believe in supporting our clinic employees—full-time and part-time—both professionally and personally. Here’s what you can expect when you join us: • Company-sponsored, best-in-class training to support earning your Registered Behavior Technician (RBT) credential, • (Includes exam cost coverage and a pay increase upon certification), • Weekly supervision and in-person BCBA support, • Free CEUs and fieldwork supervision for current or aspiring BCBA students, • Annual performance-based raises, • Increased hourly rate for bilingual (English/Spanish) candidates, • Clear pathways for advancement — whether toward Lead RBT roles or administrative opportunities (authorizations, scheduling, recruitment)., • Fun fact: some of our recruiters started as RBTs!, • Supportive, inclusive culture where your voice, ideas, and empathy are truly valued, • Accrued paid sick time (per eligibility), • Referral bonus program — help us grow the team and get rewarded, • Exclusive discounts on entertainment, travel, theme parks, and more Benefits Available for Eligible Employees (Full-time): • Medical, Dental, and Vision insurance, • 401(k) retirement plan, • Company-paid life insurance ($50,000 coverage), • Complimentary Employee Assistance Program (EAP), • A full suite of voluntary benefits to customize your coverage, • 9 company-paid holidays, • 10 days of PTO/sick time, accrued throughout the year Compensation The expected salary range for this role is $20–$27 per hour. Final compensation will be based on a range of factors, such as your skills, education, experience, certifications, market conditions, and internal equity. All offers are made in alignment with applicable federal and state laws. Children’s Specialized ABA provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Job Title: Chemical Technician 1st Shift/2nd Shift/3rd Shift Job Description The Chemical Technician 1st Shift plays a key role in ensuring product quality and laboratory safety by performing chemical testing, maintaining adherence to ISO 9001 standards, and supporting quality control processes across raw materials and finished products. This position actively participates in safety initiatives, manages product and customer specifications within the quality management system, and helps resolve quality and process issues between the laboratory and production. Responsibilities • Prepare safety topics and lead weekly safety meetings to promote a strong safety culture in the laboratory., • Ensure the quality of products and maintain strict adherence to ISO 9001 standards in all testing and documentation activities., • Perform chemical testing and cover any area of testing required in the lab when needed or requested., • Monitor sample status in the QC database and close and release product test results in a timely and accurate manner., • Identify personnel-related issues within the lab, communicate them appropriately, and recommend resolutions to leadership., • Identify, communicate, and retrain team members to address errors made by both the lab and production, such as missing labels on sample cups, incorrect product or customer information on sample labels, missing test results, or erroneous data., • Recommend and support corrective actions to prevent recurring errors in sampling, testing, and data recording processes., • Enter all new customer and product specifications into the quality management system and maintain accurate, up-to-date specifications., • Validate Certificates of Analysis (C of A) first released from the quality management system and ensure that correct specifications are in place., • Initiate specification requests when no existing specifications are available for a product or customer., • Monitor raw materials in quality inspection, perform necessary testing, and release materials in a timely manner., • Resolve raw material specification issues by coordinating with appropriate stakeholders and ensuring compliance with quality requirements., • Collaborate with production and other departments to support blending and related processes through accurate testing and specification management., • Maintain accurate records and documentation for all testing, inspections, and specification changes in accordance with GMP and quality procedures. Essential Skills • Experience working in a GMP (Good Manufacturing Practice) environment and following established quality and documentation procedures., • Hands-on experience with chemical testing in a laboratory setting., • Strong knowledge of wet chemistry techniques and raw material testing methods., • Ability to work with and maintain data in a QC database and quality management system., • Attention to detail in labeling samples, recording test results, and validating specifications., • Ability to identify errors and inconsistencies in test data, sample information, and specifications and take corrective action., • Strong communication skills to clearly convey safety topics, quality issues, and corrective actions to team members., • Capability to lead and chair weekly safety meetings and promote safe work practices. Additional Skills & Qualifications • Familiarity with ISO 9001 quality standards and their application in a laboratory and production environment., • Ability to manage and update customer and product specifications within a quality management system., • Experience validating Certificates of Analysis (C of A) against established specifications., • Problem-solving skills to resolve raw material specification issues and support continuous improvement., • Ability to collaborate effectively with laboratory and production teams to ensure accurate testing and blending processes. Work Environment This is a 1st shift position with working hours from 6:00 a.m. to 2:30 p.m. The role is based in a laboratory and production support environment that emphasizes safety, GMP compliance, and adherence to ISO 9001 standards. Work involves routine chemical testing, wet chemistry procedures, and interaction with a QC database and quality management systems. The environment is structured and process-driven, with regular safety meetings and close collaboration between quality, lab, and production teams. If you are looking for 2nd or 3rd shift we do have openings there too! If interested and qualified please book a virtual meeting with me here: https://talentassistant.actalentservices.com/assistant/bookings/aOjUnKc_ Job Type & Location This is a Contract to Hire position based out of South Plainfield, NJ. Pay and Benefits The pay range for this position is $24.00 - $24.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in South Plainfield,NJ. Application Deadline This position is anticipated to close on Oct 13, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job Description Job Title: Chemical Technician 1st Shift Job Description The Chemical Technician 1st Shift plays a key role in ensuring product quality and laboratory safety by performing chemical testing, maintaining adherence to ISO 9001 standards, and supporting quality control processes across raw materials and finished products. This position actively participates in safety initiatives, manages product and customer specifications within the quality management system, and helps resolve quality and process issues between the laboratory and production. Responsibilities • Prepare safety topics and lead weekly safety meetings to promote a strong safety culture in the laboratory., • Ensure the quality of products and maintain strict adherence to ISO 9001 standards in all testing and documentation activities., • Perform chemical testing and cover any area of testing required in the lab when needed or requested., • Monitor sample status in the QC database and close and release product test results in a timely and accurate manner., • Identify personnel-related issues within the lab, communicate them appropriately, and recommend resolutions to leadership., • Identify, communicate, and retrain team members to address errors made by both the lab and production, such as missing labels on sample cups, incorrect product or customer information on sample labels, missing test results, or erroneous data., • Recommend and support corrective actions to prevent recurring errors in sampling, testing, and data recording processes., • Enter all new customer and product specifications into the quality management system and maintain accurate, up-to-date specifications., • Validate Certificates of Analysis (C of A) first released from the quality management system and ensure that correct specifications are in place., • Initiate specification requests when no existing specifications are available for a product or customer., • Monitor raw materials in quality inspection, perform necessary testing, and release materials in a timely manner., • Resolve raw material specification issues by coordinating with appropriate stakeholders and ensuring compliance with quality requirements., • Collaborate with production and other departments to support blending and related processes through accurate testing and specification management., • Maintain accurate records and documentation for all testing, inspections, and specification changes in accordance with GMP and quality procedures. Essential Skills • Experience working in a GMP (Good Manufacturing Practice) environment and following established quality and documentation procedures., • Hands-on experience with chemical testing in a laboratory setting., • Strong knowledge of wet chemistry techniques and raw material testing methods., • Ability to work with and maintain data in a QC database and quality management system., • Attention to detail in labeling samples, recording test results, and validating specifications., • Ability to identify errors and inconsistencies in test data, sample information, and specifications and take corrective action., • Strong communication skills to clearly convey safety topics, quality issues, and corrective actions to team members., • Capability to lead and chair weekly safety meetings and promote safe work practices. Additional Skills & Qualifications • Familiarity with ISO 9001 quality standards and their application in a laboratory and production environment., • Ability to manage and update customer and product specifications within a quality management system., • Experience validating Certificates of Analysis (C of A) against established specifications., • Problem-solving skills to resolve raw material specification issues and support continuous improvement., • Ability to collaborate effectively with laboratory and production teams to ensure accurate testing and blending processes. Work Environment This is a 1st shift position with working hours from 6:00 a.m. to 2:30 p.m. The role is based in a laboratory and production support environment that emphasizes safety, GMP compliance, and adherence to ISO 9001 standards. Work involves routine chemical testing, wet chemistry procedures, and interaction with a QC database and quality management systems. The environment is structured and process-driven, with regular safety meetings and close collaboration between quality, lab, and production teams. If you are looking for 2nd or 3rd shift we do have openings there too! If interested and qualified please book a virtual meeting with me here: https://talentassistant.actalentservices.com/assistant/bookings/aOjUnKc_ Job Type & Location This is a Contract to Hire position based out of South Plainfield, NJ. Pay and Benefits The pay range for this position is $24.00 - $24.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in South Plainfield,NJ. Application Deadline This position is anticipated to close on Oct 22, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Position Overview: We are seeking a hands-on and detail-oriented Process Engineer to join our dynamic manufacturing operations team. This role is critical in supporting yield improvement, day-to-day production troubleshooting, and new product introduction (NPI) within a fast-paced 24/7 high-volume production environment. You will work directly on 1st shift (8:30AM – 5PM) to ensure optimal performance of processes, effective support to production teams, and smooth onboarding of new products. This position is an excellent opportunity for engineers looking to make a significant impact in advanced manufacturing operations, supporting blue-chip customers with world-class standards for quality and delivery. The Process Engineer will be expected to work on-site five days a week in our Somerset, NJ office. Key Responsibilities: • Provide real-time process support for production teams on the afternoon shift, ensuring minimal downtime and swift issue resolution., • Analyze and improve manufacturing yields, identifying root causes of scrap, rework, and process variation through data-driven methods (e.g., SPC, FMEA, 5 Whys, Fishbone)., • Lead or support new product introduction (NPI) activities, including process validation, work instruction development, and ramp-up readiness., • Collaborate with cross-functional teams (Quality, Maintenance, Operations) to drive continuous improvement initiatives focused on cost, efficiency, and throughput., • Develop and maintain standard operating procedures, process documentation, and training materials for manufacturing staff., • Support implementation of Lean manufacturing and Six Sigma techniques to reduce waste and improve process control., • Monitor key performance indicators (KPIs) for yield, cycle time, downtime, and quality, with regular reporting and action planning., • Participate in audits, customer visits, and internal reviews as a technical subject matter expert for assigned process areas., • Ensure compliance with safety, quality, and regulatory standards applicable to manufacturing operations Other Important Responsibilities: • Consistently demonstrate the ability to prioritize tasks to ensure most critical processes impacting business results are being addressed., • Thorough documentation of existing processes and new process development, inclusive of progressive results, specific equipment parameters and work instructions where appropriate., • Other miscellaneous duties as assigned. Qualifications: • Bachelor's degree in Manufacturing, Mechanical, Industrial, or Chemical Engineering (or equivalent field)., • A minimum of 5 years (or more) of experience in a high-volume manufacturing environment (preferably supporting 24/7 operations)., • Proven experience in yield improvement, root cause analysis, and process troubleshooting., • Familiarity with NPI processes, including process validation and production readiness., • Strong working knowledge of Lean, Six Sigma, SPC, and other process control methodologies., • Proficiency with data analysis tools (Excel, Minitab, JMP, etc.) and manufacturing systems (MES, ERP)., • Excellent communication and collaboration skills across shifts and cross-functional teams., • Willingness to work on the weekends or afternoon shift (3 PM – 11 PM) and occasionally support coverage across other shifts as needed., • Experience in regulated manufacturing (e.g., automotive, aerospace, electronics, or medical device)., • Six Sigma Green Belt or Lean certification., • Hands-on experience with automation systems, sensors, or high-throughput equipment. Physical requirements and work environment: • Must be able to lift 20 lbs;, • Must be able to sustain office work for 8+ hours per day including the following:, • Sitting in an office chair, • Typing, • Reaching for the telephone, • Standing at office equipment, • Hearing for phone use, • Sight for computer use, • Must be able to sustain factory work as needed including the following:, • Standing at machinery, • Reaching and pulling to operate machinery, • Sight for machinery operation, • Walking through shop, • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended.

Job Description We're looking for a 2nd Shift Warehouse Supervisor who's ready to roll up their sleeves, lead by example, and keep daily operations running smoothly. You'll guide the team, make sure orders are spot-on, and keep safety and efficiency front and center. What You'll Do • Lead and motivate your team to hit goals and stay productive., • Keep warehouse operations on track, receiving, picking, shipping, you name it., • Make sure inventory and paperwork are accurate., • Keep safety a top priority and set the standard., • Look for ways to make processes better and smarter., • Work with other supervisors to keep shifts running seamlessly. What We're Looking For: • 3+ years of warehouse leadership experience, • A natural leader who communicates clearly and keeps people motivated., • Solid understanding of warehouse operations and safety practices., • Comfortable using warehouse systems and data to get things done., • Able to lift up to 50lbs. and keep up in a busy environment. Why You'll Love It Here? • You'll have the chance to lead and grow a team that counts on you., • Be part of a safety-first culture where teamwork comes first., • Solid benefits, and plenty of room to grow your career. The anticipated salary for this position is $70,000.00 to $72,000. In addition to competitive pay, Port Jersey Logistics Network offers a robust benefits package including health, dental, and vision coverage, a 401(k) retirement plan, and paid time off. Port Jersey Logistics Network provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Summary - (11:00-8:00pm Shift) The Terumo Aortic Territory Support Specialist (TSS) is responsible for supporting Terumo Aortic (TA) business goals determined annually by the Area Directors (AD) in support of the overall Territory. Help support Aortic Consultants (ACs) achieve their respective territory and regional sales goals determined annually by the TA executive leadership team by cultivating relationships within the assigned territory to ensure customer satisfaction and identify potential opportunities. Ensure thorough and timely follow-up to customer’s questions and concerns by effectively communicating and partnering with cross functional teams such as AC’s, Customer Care, Marketing and Field Inventory Management. Support ACs with more complex order and inventory management processes and identifies and implements process improvements. Job Details/Responsibilities • Support the goals assigned to the TSS by the AD, as determined in collaboration with TA sales leadership., • Provide phone support to TA sales team and management as needed, including but not limited to rotating shift of coverage for 24 hours/7 days support of issues escalated., • In emergent situations, TSS will support the field with coordinating the sourcing of inventory from alternative locations other than the distribution center (Field Associates, Manufacturing site, etc.), • Help ACs in the field to place an order when emergent or in a time sensitive situation., • Order Tracking, • TM Training on Tracking Orders when PO has shipped, • TSS to Track when the PO has not shipped yet, • Assist field sales team with sample orders when having technical issues or need marketing approval, • In emergent situations, TSS will support the field with administrative support on minor items, e.g. look up specific codes or account numbers, but this is on an exception basis and should be handled by the AC in most instances., • Assist the field sales team in applying Bill-only POs with field inventory and managing “duplicate protection” periodically each business day. Work with Customer Care to get these processed to close field inventory scans., • Manage Price Input Forms (PIF) process, including helping manage qualified Volume Purchase Agreements that have been vetted out by AC in advance that were approved by Area Leader., • Interact with Marketing to address AC/customer questions and inquiries., • Provide “white glove” account service/support for a limited number of accounts of high strategic value, while developing relationships in these accounts to help drive business through increased awareness of upcoming cases., • Support lead monitoring and contact ACs to help ensure prompt lead closure and campaign ROI calculation., • Provide support on requests to physicians or other HCPs to “opt in” to Terumo online outreach via CRM-based lead management tools., • Train and mentor newly hired TSSs., • Handle all requests from Customer Administration forwarded to the TSS, assuring a timely resolution., • Participate in Area and National sales meetings to assure strong alignment and collaboration with Sales and Marketing. Complete all administrative duties required for the position., • Responsible for special projects and for ongoing process improvement efforts as needed via MBO’s and other commercially focused projects., • Demonstrate a commitment to patient safety and product quality by maintaining compliance with all TMC Quality requirements. This includes but is not limited to the prompt recognition and forwarding of customer complaints (i.e., adverse events, product performance reports, etc.) to Quality Assurance (QA), and by ensuring all promotional messaging (i.e., branding strategies, product claims, etc.) and materials (i.e., literature) discussed or presented to customers are clinically accurate and adhere to AdvaMed guidelines and Terumo’s policy on Interactions with Healthcare Professionals. Fully adhere to all applicable FDA regulations, international guidelines and Terumo’s policies always., • Understand and adhere to regulations regarding proper usage of promotional materials., • Collaborate with the Field Inventory Management Team for efficient order processing., • TSS will be measured via MBOs based on metrics focusing on field sales support, performance of “white glove” focus accounts, and may include cross-functional project support with other departments, including but not limited to Sales, Commercial Excellence, and Marketing., • Perform other job-related duties as assigned. Knowledge, Skills and Abilities (KSA) • Must possess excellent communication skills and impressive telephone demeanor., • Must demonstrate a solid grasp and application of the sales process, including handling all types of objections and probing to uncover unmet and existing needs., • Ability to build strong relationships with all internal and field associates., • Must speak clearly, have a strong telephone presence, and assert oneself with a sense of confidence, conviction, and enthusiasm., • Must be able to handle rejection and learn to adopt alternative approaches., • Must possess a sense of urgency, ability to meet deadlines and function independently with minimal supervision., • Must be highly organized with ability to handle multiple tasks while maintaining composure and professionalism., • Proficient in Microsoft Office software especially Word, Excel, PowerPoint, and Outlook and possess an ability to learn new software. Qualifications/ Background Experiences • Bachelor’s Degree or comparable related experience required., • 3 years of experience in a service environment demonstrating customer interaction is required (operations, sales, telesales, or telemarketing preferred), • Experience with sales tactics or process preferred., • Experience with healthcare and/or healthcare administration preferred., • Experience with SAP preferred. It is Terumo’s policy to provide equal employment opportunity to all its employees and applicants for employment regardless of their race, creed, color, national origin, age, ancestry, nationality, marital or domestic partnership or civil union status, sex, pregnancy, gender identity or expression, disability status, liability for military service, protected veteran status, sexual orientation, atypical cellular or blood trait, genetic information (including the refusal to submit to genetic testing), or any other category protected by law. As a Company, we value diversity of background and opinion, and prohibit discrimination or harassment on the basis of any legally protected class in the areas of hiring, recruitment, promotion, transfer, demotion, training, compensation, pay, fringe benefits, layoff, termination or any other terms and conditions of employment. Final compensation packages may be higher or lower than what is listed, and will ultimately depend on factors including relevant experience, internal equity, skillset, knowledge, geography, education, business needs and market demand. We provide competitive and comprehensive benefit options which include: annual bonus, paid vacation, paid holidays, health, dental and vision benefits, 401(k), with matching contributions, tax advantage savings accounts, legal plan, voluntary life and AD&D insurance, voluntary long-term disability, short term disability, critical illness and accident insurance, parental leave, personal leave, tuition reimbursement, travel assistance, and an employee assistance program. Pay range: $64,720 - $88,990

WE ARE HIRING: MANAGER, REVENUE GROWTH MANAGEMENT (RGM) Location: Perth Amboy, NJ (On-site) Reporting to: Chief Executive Officer Join Tropical Cheese Industries, a leader in the Hispanic food industry for over 40 years, as our first Manager, Revenue Growth Management (RGM) Summary The RGM Manager owns how Tropical Cheese prices, promotes and packages its portfolio across all channels, including retail, DSD, foodservice and distributors. Key Responsibilities Strategy, Governance and Leadership • Build the annual pricing, promotion and trade spend budget, set clear revenue and margin targets, and track performance against them, • Establish and run a monthly revenue review with Sales, Finance and Marketing leadership, • Define and enforce pricing and trade guardrails by retailer and channel, alongside working closely with retailers to enforce these, • Collaborate with Sales, Finance, Marketing and Operations, and train the sales team on pricing, promotion and trade tools and guidelines, • Lead and develop one direct report (RGM Analyst): set priorities, coach on analytical and commercial judgment, and build the capability of the RGM function, • Other duties as required by the business Pricing and Price-Pack Architecture • Own the list price architecture across the portfolio; recommend, size and sequence all price changes by brand, pack, channel and customer, • Lead price-pack architecture design: pack sizes, key price points, price tiers and good-better-best laddering by channel, • Recommend portfolio and mix actions that shift volume toward higher-margin packs, brands and channels Promotion and Trade Spend • Own promotional strategy and the promotion calendar recommendation by retailer, • Evaluate promotional ROI by customer, brand and event, • Manage trade spend against budget; partner with Finance on accrual accuracy and deduction resolution Key Skills & Qualifications • Advanced Excel proficiency (required) – scenario modeling, large data sets, and the ability to build clean, auditable tools from scratch, • Power BI or Tableau (required), • Experience with syndicated and retailer data: Circana, NielsenIQ, and retailer portals (Walmart Scintilla, and similar), • Experience with ERP systems (Oracle NetSuite or equivalent), • Demonstrated ownership of pricing, promotion or trade investment decisions in a CPG or food manufacturing environment, • Strong P&L and margin literacy: gross-to-net, trade spend, customer profitability, elasticity and ROI Education and/or Experience • Bachelor’s degree in Business, Finance, Economics, Analytics or a related field preferred; equivalent practical experience will be considered, • Minimum 4-6 years of commercial experience in CPG or food manufacturing, including 2+ years directly applied to revenue growth management, pricing, trade strategy, category management or commercial finance, • Experience in Hispanic foods, dairy, deli / perimeter or other perishable categories strongly preferred, • Direct store delivery (DSD) experience strongly preferred What We Offer • Competitive salary + Performance Bonus, • Medical, Dental, Vision, and Life Insurance, • 401(k) with company match, • Paid time off, • Paid holidays Equal Employment Opportunity (EEO): Tropical Cheese Industries, LLC. is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

About Eos Energy Enterprises Eos Energy Enterprises, Inc. is accelerating the shift to American energy independence with positively ingenious solutions that transform how the world stores power. Our breakthrough Znyth™ aqueous zinc battery was designed to overcome the limitations of conventional lithium-ion technology. It is safe, scalable, efficient, sustainable, manufactured in the U.S., and the core of our innovative systems that today provides utility, industrial, and commercial customers with a proven, reliable energy storage alternative for 3 to 12-hour applications. Eos was founded in 2008 and is headquartered in Edison, New Jersey. For more information about Eos (NASDAQ: EOSE), visit _. The Sr. Electrical Engineer is accountable for advanced development and design of battery management system electronics and controls for newly built energy storage systems, as well as maintaining existing designs and support the creation of automated test equipment for the product components. This role demands deep expertise in low-level circuit design, high-voltage layout practices, and compliance with safety standards. The ideal candidate will serve as a technical authority across design, testing, documentation, and cross-functional support. Responsibilities • Architect and implement low-level electronic circuits incorporating electrical isolation, microcontroller control systems, and precision analog front-ends, • Design and optimize circuit board layouts for high-impedance analog signals, ensuring compliance with creepage and clearance requirements for high-voltage applications, • Develop designs that meet global safety certification standards (e.g., UL, IEC), including documentation and testing support for regulatory submissions, • Lead comprehensive verification testing of electronic components and integrated product designs, ensuring performance, reliability, and safety., • Generate detailed reports on design rationale, test methodologies, and results to support engineering reviews and product documentation., • Maintain thorough design records and contribute to the development of operation manuals and user documentation., • Provide expert-level troubleshooting and technical support for manufacturing teams and field operations on released products, • Offer strategic technical guidance to engineering teams, production staff, and service personnel, fostering best practices and continuous improvement. Knowledge, Skills, and Abilities • Proficient in designing and validating electrical circuit boards, including hands-on testing and performance evaluation., • Ability to work in lab environment and understand how components fit into a larger system, • Solid understanding of embedded control systems and their practical applications across various domains., • Strong programming capabilities in C and C++, with working knowledge of Linux-based development environments., • Demonstrated ability to diagnose issues and implement design improvements for enhanced reliability and performance., • Familiarity with design for EMC and availability to trace down EMI issues, • Knowledgeable in safety certification processes, including compliance with standards such as UL and IEC., • Competent skills with communications protocols such as TCP/IP, CAN, i²C and SPI; use of Modbus, • Capable of identifying, evaluating, and integrating off-the-shelf components and equipment into system designs., • Strong cross-discipline system skills, • Understanding of hardware and physical system being controlled is required, • Comfort and experience with the hazard and safety protocols of high voltage equipment and other aspects of working with large-scale battery systems, • Ability to self-direct to a goal and achieve independent success, • Ability to mentor junior engineers and technicians, • A team-player attitude and strong written/verbal communication skills are a must Education and Experience • Bachelor's degree in Electric Engineering, Electronic Engineering, Computer Engineering, or Electrical Engineering Technology required, • Minimum of 8 years' experience required Additional Experience • Hardware and design, debug, and testing. PCB design., • Minimum eight years’ experience designed electronics, developing automated controls, and troubleshooting, • Engineering Design Software: EAGLE, IAR or similar software, • Embedded programming, communication interfaces; I²C, RS-485, CAN bus communication, Modbus TCP, remote IO, or flex IO systems (Moxa, Allen Bradley, SEL, Advantech), PLC programming experience, GDB or other debugging tools., • Linux, embedded systems, • High voltage electrical systems Travel • Local Travel - Less than 10%, • Overnight/North America - Less than 10% Working Conditions • Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 25 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.

Job Description Shift Leader Our first Smashburger restaurant opened in 2007 with one single notion in mind; to serve a better burger! Better burgers takes better service, support and teamwork. That's why we treat our team members fairly in a diverse and safe environment. With an average of 10 restaurants opening each year, we invest in building internal opportunities for our teams’ learning and growth.” We just build better. Better Burgers. Better Teams. Better Experiences. Better Benefits: Build a better experience work & lifestyle! • Tip share-earn up to $2/hr. extra in tips, • Get Paid $ to Refer your Friends*, • RGMs, RMs, & SLs are entitled to one (1) free meal each shift they work *, • Flexible schedules in a fun, family friendly, team environment, • Medical, Dental and Vision Options**, • Paid time off – vacation and sick**, • 401K match (21 and older), • Employee Assistance Program, • Fast track for career opportunities and management experience, • Free uniform **Eligibility based off of time in position and average hours worked *Referred Employees Must Be in Good Standing & Referee must be employed with Smashburger at time of payout. Bonus is paid in two distributions Shift Leader Responsibilities • Reporting to the Restaurant General Manager, our Shift Leaders are the champions of better burgers! In this role you will:, • Manage the performance of both FOH & BOH employees, • Promote a fun and positive work environment, • Manage the effectiveness of people focused processes and systems, • Provide initial and ongoing training to all employees within the unit utilizing SmashConnect, LMS, and 4 step method of training, • Reward and recognizes employee performance that exceeds company standards, • Manage with integrity the daily completion of operational check lists to include, • Line checks and uniform standards, • Opening/closing check lists, • Safe and deposit logs, • Manage the guest experience metrics (NPS and OSAT), • Manage FSC operational standards daily, • Ensure all food safety standards are followed & in compliance with local health depts., • Exemplify guest service on each shift of the day and communicates SIZZLE service standards to the employees, • Manage the successful onboarding and training for all new employees, • Follow COGS management procedures for food ordering and inventory, • Follow company cash policies to ensure minimal losses through theft or shortages, • Manage daily labor Shift Leader Requirements • Previous Shift Leader Experience, • 90-day completion of train the trainer course, • Flexible to work nights, weekends, and holidays, • Follow Smashburger uniform standards, • Ability to follow all guidelines and procedures set forth by Smashburger, local, state, and federal employment regulations, • Must successfully complete Smashburger training program, • Possess strong communication skills, both written and verbal, to effectively communicate with restaurant management, front line employees and corporate support teams, • People management skills to effectively select, assess, coach/counsel, develop, motivate, and lead restaurant teams, • Excellent attention to detail, • Proven time management, consistency, and organizational skills, • Highly motivated, self-directed, and results driven, • Physical ability to stand for extended periods of time and to move and lift boxes of food/ supplies up to 50 lbs., • Ability to work in high temperatures All applicants and employees have an equal opportunity for employment and advancement within Smashburger. Smashburger is dedicated to the principles of equal employment opportunity. We prohibit unlawful discrimination against applicants, prospective applicants, or employees on the basis of age 40 and over, race, sex, color, religion, national origin, disability, genetic information, sexual orientation, gender identity, military or veteran status, or any other applicable status protected by state or local law. This prohibition includes unlawful harassment based on any of these protected classes. Unlawful harassment includes verbal or physical conduct which has the purpose or effect of substantially interfering with an individual’s work performance or creating an intimidating, hostile, or offensive work environment. We maintain a workplace free of racial slurs and bias. This policy applies to all employees, including managers, supervisors, co-workers, and non-employees such as customers, clients, vendors, consultants, etc. Any conduct in violation of these company policies is also a violation of the law. Employees who engage in, ratify, or perpetuate discrimination, harassment or retaliation will be subject to disciplinary action, up to and including immediate discharge. We use eVerify to confirm U.S. Employment eligibility. https://smashburger.com/job-applicant-privacy-policy We use eVerify to confirm U.S. Employment eligibility.

3PL Warehouse Supervisor - Bilingual Mandarin REQUIRED Location: Piscataway, NJ Job Type: Full-Time Salary: $66,500 - $83,000 About the Role As a Warehouse Supervisor at JD Logistics, you’ll lead and manage daily warehouse operations in our busy New Jersey distribution center. You’ll be responsible for ensuring operational efficiency, accurate order fulfillment, and maintaining safety and quality standards. This is a hands-on leadership role ideal for individuals who enjoy problem-solving, leading teams, and driving results in a fast-paced environment. What You’ll Do: • Oversee daily warehouse functions including receiving, put-away, picking, packing, and shipping, • Ensure timely and accurate execution of customer orders, • Monitor productivity, adjust workflows, and address bottlenecks, • Supervise a team of warehouse associates; train, coach, and mentor team members, • Allocate labor and assign tasks to meet operational goals, • Conduct cycle counts and inventory audits to maintain accuracy, • Monitor quality control and escalate product/order discrepancies, • Enforce adherence to all warehouse safety protocols and company SOPs, • Promote a clean, organized, and safe work environment, • Communicate shift updates, challenges, and results to Warehouse Manager, • Collaborate with internal teams and clients to troubleshoot operational issues About You: • 3+ years experience in a warehouse, distribution, or 3PL environment, • At least 1 year in a lead or supervisory role, • Strong knowledge of warehouse operations and safety procedures, • Familiarity with WMS or inventory systems preferred, • Bilingual in Mandarin Required

The Director, Integrated Media leads the planning, buying, and optimization of paid media across search, AI paid advertising, aggregators, direct mail, email, programmatic, paid social, and traditional media channels. Reporting to the Managing Director, Direct Marketing, this leader owns the integrated media strategy that drives profitable customer acquisition for the direct-to-consumer business. This role manages an in-house media team and partners closely with the Director of Brand Strategy and the Director of Data & Analytics: together they inform every media buy, ensuring that upper-funnel awareness and lower-funnel acquisition investments work as one integrated plan. The ideal candidate combines deep channel expertise with strong analytical judgment and the ability to develop and inspire a high-performing team. RESPONSIBILITIES • Strategy & planning: Develop and execute an integrated, multi-channel media strategy and annual plan that aligns with growth, retention, and profitability goals., • Brand Strategy partnership: Collaborate closely and continuously with the Director of Brand Strategy to align media plans with brand positioning, audience insights, messaging, and creative direction, so that every buy reinforces the brand and supports awareness and consideration goals., • Data & Analytics partnership: Partner with the Director of Data & Analytics to inform all media buys with audience analysis, attribution, incrementality testing, forecasting, and performance insights; jointly set KPIs and review results on a regular cadence., • Full-funnel investment: Balance investment across upper-funnel awareness and lower-funnel acquisition channels, define success measures for each stage, and shift spend as results warrant., • Traditional media: Lead strategy, planning, and investment for all traditional media, including video (linear, streaming, and connected TV), audio (radio, streaming, and podcast), and out of home; oversee negotiation, buying, and measurement with publisher partners., • Budget & performance: Own the media budget and allocate spend across channels based on performance and market conditions; manage to efficiency and volume targets., • Measurement & optimization: Partner with Data and Analytics to establish attribution, testing, and reporting frameworks; use insights to continually improve efficiency and customer quality., • Team leadership: Lead, coach, and develop Media Team; set clear goals, build a culture of accountability and learning, and plan for talent and succession., • Vendor & partner management: Manage relationships and negotiations with publishers, vendors, and platforms to secure favorable terms and access to new opportunities., • Operational excellence: Oversee marketing operations and trafficking processes to ensure accurate, timely, and scalable campaign execution., • Innovation: Stay ahead of changes in media industry and competitive environment; pilot and scale new channels, tools, and capabilities., • Executive communication: Report on performance, forecasts, and strategic recommendations to senior leadership. QUALIFICATIONS • Education: Bachelor's degree in Marketing, Business, Communications, or a related field; MBA or advanced degree preferred., • Experience: 10+ years of experience in performance or direct-response marketing and media buying, including 5+ years leading and developing managers and teams., • Channel expertise: Proven success managing large budgets across multiple paid channels, including search, programmatic, paid social, direct mail, email, video, audio and out of home., • Full-funnel experience (required): Demonstrated experience developing and managing both upper-funnel awareness channels and lower-funnel acquisition strategy, with a track record of connecting brand investment to acquisition results., • Cross-functional partnership: Proven ability to partner with brand strategy and data and analytics leaders to inform media decisions., • Analytical skills: Strong command of attribution, testing, and media measurement, with the ability to translate data into actionable decisions., • Leadership: Demonstrated ability to build, motivate, and retain high-performing teams in a collaborative environment., • Communication: Excellent written, verbal, and presentation skills, with the ability to influence senior stakeholders., • Preferred: Experience in insurance or other regulated financial services, and familiarity with emerging media platforms. SALARY RANGE The pay range for this position is $175,000 to $230,000 annually. Actual compensation will vary based on multiple factors, including employee knowledge and experience, role scope, business needs, geographical location, and internal equity. PERKS & BENEFITS • 4 weeks accrued paid time off, 8 paid national holidays per year, and 2 floating holidays, • Low cost and excellent coverage health insurance options that start on Day 1 (medical, dental, vision), • Annual 401(k) Employer Contribution, • Free onsite gym and health center at our Woodbridge Location, • Resources to promote Professional Development (LinkedIn Learning and licensure assistance), • Robust health and wellness program and fitness reimbursements, • Various Paid Family leave options including Paid Parental Leave, • Tuition Reimbursement ABOUT THE COMPANY The Plymouth Rock Company and its affiliated group of companies write and manage over $2 billion in personal and commercial auto and homeowner’s insurance throughout the Northeast and mid-Atlantic, where we have built an unparalleled reputation for service. We continuously invest in technology, our employees thrive in our empowering environment, and our customers are among the most loyal in the industry. The Plymouth Rock group of companies employs more than 1,900 people and is headquartered in Boston, Massachusetts. Plymouth Rock Assurance Corporation holds an A.M. Best rating of “A-/Excellent”.

Job Description As a Shift Leader at our New Brunswick, NJ store located at 176 Easton Ave New Brunswick, NJ 08901 you are the captain of our bakery day or night! You understand what it takes to “Own the Night” (and beyond), by predicting the flow of business during a successful shift. Your hands-on leadership style should not only include building orders, suggestive selling, baking, and interacting with customers – it will also mean taking pride in knowing that your prowess as a leading Insomniac attributes to a productive and fun night for your store! SOME OUR SWEET SHIFT LEADER PERKS: • Pay Rate: $16.75/hr • Pay on Demand (why wait until the end of the week…get paid your earned wages at the end of the day!) • Paid vacation and sick time off • Interactive training & mentorship • Pet insurance for your furry loved ones • Job stability with a rapidly growing and reputable company • Achievable growth/promotion opportunities • You get to work in a fun, exciting team environment • Employee discount and FREE cookies with every shift! WHAT WILL I DO AS A SHIFT LEADER? • Provide incredible customer service and quality products to all of our guests throughout their experience within our bakeries • Support store leadership by maintaining operations during your shift, communicating pertinent information, monitoring production efficiency, holding the team accountable to company standards and procedures, and assisting in the training and coaching of team members • Prioritize and delegate tasks for baking, cashiering, packaging, and cleaning while leading the cookie crew team • Support and work alongside the Cookie Crew • Provide a safe, clean, working environment for our guests and staff and adhere to safe food handling practices • Manage cash handling and deposits DESIRED SKILLS/EXPERIENCE: • At least 1 year of working experience in a customer service focused role • Point of Sales systems experience • Outstanding communication, time management, and people skills • Outgoing/friendly/patient • Detail focused and results-oriented • Ability to lead-by-example and motivate others • Ability to lift up to 40 lbs. • Legally eligible to work in the United States • Must be 18 years or older to be employed About us: Insomnia Cookies was founded in a college dorm room by then-student, Seth Berkowitz. Fast forward 20 years and so... many....cookies... later, our innovative bakery + delivery concept has become a cult brand known for its rabid following of cookie lovers who crave Insomnia’s warm, delicious delivery all day and late into the night. With an expanding footprint of over 300 stores globally, an experiential, “sweet-easy” concept as the brand’s flagship in Philadelphia, Pa. (where Insomnia Cookies is headquartered), and a rapidly-growing nationwide shipping and gifting portfolio... Insomnia Cookies is revolutionizing the cookie game by truly "Imagining What’s Possible"! We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

The Director, Marketing Data & Analytics leads the data, measurement, and analytics function that guides marketing investment and customer acquisition for the direct-to-consumer business. Reporting to the Managing Director, Direct Marketing, this leader owns the marketing data foundation, including the customer data platform (CDP), the data layer, and the migration to a modern marketing data stack, along with attribution and incrementality measurement, forecasting, and performance insights. This role manages an in-house team of analysts and data professionals and partners closely with the Director, Integrated Media, the Director of Brand Strategy, and IT and Data Engineering: together they ensure that upper-funnel awareness and lower-funnel acquisition investments are planned, measured, and optimized as one integrated program on a unified view of the customer. The ideal candidate combines deep technical and statistical expertise with strong business judgment and the ability to develop and inspire a high-performing team. RESPONSIBILITIES • Analytics strategy: Develop and execute the marketing data and analytics roadmap, aligned with growth, retention, and profitability goals, and prioritize work by business impact., • CDP strategy & ownership: Own the vision, business requirements, and roadmap for the customer data platform: identity resolution, unified customer profiles, audience segmentation, and activation to media, email, direct mail, and analytics destinations., • Data layer & tagging: Define and govern the marketing data layer and event taxonomy across web, mobile, and quote-and-bind flows; oversee tag management and server-side tracking to ensure consistent, accurate, privacy-compliant data capture., • Data migration: Lead the planning and execution of migrations of marketing data, tracking, and reporting to the CDP and cloud data platform, including source mapping, validation, parallel runs, cutover, and decommissioning of legacy systems., • Data governance & privacy: Establish data quality, consent management, and governance standards, in partnership with IT, Data Engineering, Legal, and Compliance, for a regulated insurance environment., • Media & Brand partnership: Partner with the Director of Integrated Media and the Director of Brand Strategy to inform media buys with audience analysis, forecasting, and performance insights; jointly set KPIs, measure brand health, and review results on a regular cadence., • Attribution & measurement: Own attribution, media mix modeling, and incrementality testing frameworks that measure the true contribution of every channel across the full funnel, built on CDP and data layer inputs., • Forecasting & customer analytics: Build forecasting, budget scenario, segmentation, lifetime value, and retention models that guide channel investment, efficiency and volume targets, and customer quality., • Reporting & self-service: Deliver dashboards and standard reporting that give marketing and media teams timely, trusted, and actionable performance views., • Team leadership: Lead, coach, and develop the Marketing Data & Analytics team; set clear goals, build a culture of accountability and learning, and plan for talent and succession., • Vendor & innovation: Manage relationships with CDP, measurement, and data vendors; evaluate new tools and stay ahead of changes in marketing measurement, privacy, and AI-driven analytics., • Executive communication: Translate complex analysis and program status into clear reports, forecasts, and strategic recommendations for senior leadership. QUALIFICATIONS • Education: Bachelor's degree in Statistics, Mathematics, Economics, Business, Marketing, or a related quantitative field; MBA or advanced degree preferred., • Experience: 10+ years of experience in marketing analytics, data science, or performance and direct-response marketing, including 5+ years leading and developing managers and teams., • CDP & data migration (required): Demonstrated experience implementing or leading a CDP (e.g., Segment, mParticle, Tealium, Adobe, or Salesforce Data Cloud) and migrating marketing data, tracking, or analytics platforms, from requirements through cutover and adoption., • Data layer & tagging: Hands-on knowledge of data layer design, event taxonomy, tag management (e.g., Google Tag Manager, Tealium), server-side tracking, and web and app analytics (e.g., GA4, Adobe Analytics)., • Measurement expertise: Proven experience designing and applying attribution, media mix modeling, and incrementality testing to shift investment across upper-funnel and lower-funnel channels., • Technical skills: Advanced SQL and Python or R; experience with cloud data warehouses, ETL and reverse ETL tools, and BI tools (e.g., Tableau, Power BI)., • Cross-functional partnership: Proven ability to partner with media, brand strategy, finance, IT, and compliance leaders to inform decisions and deliver technical programs., • Leadership & communication: Demonstrated ability to build, motivate, and retain high-performing teams, with excellent written, verbal, and presentation skills for influencing senior stakeholders., • Preferred: Experience in insurance or other regulated financial services, and familiarity with consent management and data privacy requirements. SALARY RANGE The pay range for this position is $184,000 to $243,000 annually. Actual compensation will vary based on multiple factors, including employee knowledge and experience, role scope, business needs, geographical location, and internal equity. PERKS & BENEFITS • 4 weeks accrued paid time off, 8 paid national holidays per year, and 2 floating holidays, • Low cost and excellent coverage health insurance options that start on Day 1 (medical, dental, vision), • Annual 401(k) Employer Contribution, • Free onsite gym and health center at our Woodbridge Location, • Resources to promote Professional Development (LinkedIn Learning and licensure assistance), • Robust health and wellness program and fitness reimbursements, • Various Paid Family leave options including Paid Parental Leave, • Tuition Reimbursement ABOUT THE COMPANY The Plymouth Rock Company and its affiliated group of companies write and manage over $2 billion in personal and commercial auto and homeowner’s insurance throughout the Northeast and mid-Atlantic, where we have built an unparalleled reputation for service. We continuously invest in technology, our employees thrive in our empowering environment, and our customers are among the most loyal in the industry. The Plymouth Rock group of companies employs more than 1,900 people and is headquartered in Boston, Massachusetts. Plymouth Rock Assurance Corporation holds an A.M. Best rating of “A-/Excellent”.

About Eos Energy Enterprises Eos Energy Enterprises, Inc. is accelerating the shift to American energy independence with positively ingenious solutions that transform how the world stores power. Our breakthrough Znyth™ aqueous zinc battery was designed to overcome the limitations of conventional lithium-ion technology. It is safe, scalable, efficient, sustainable, manufactured in the U.S., and the core of our innovative systems that today provides utility, industrial, and commercial customers with a proven, reliable energy storage alternative for 3 to 12-hour applications. Eos was founded in 2008 and is headquartered in Edison, New Jersey. For more information about Eos (NASDAQ: EOSE), visit _. Eos is at the forefront of developing advanced embedded solutions for energy storage and management. The Manager of Embedded Software Engineering will lead a team of talented engineers in designing, developing, and optimizing firmware for Battery Management Systems (BMS) tailored to the Eos battery technologies, ensuring safety, reliability, and compliance with industry standards such as UL 1998, UL 60730 Annex H, etc. The Manager of Embedded Software Engineering is responsible for overseeing the strategic direction, technical execution, and team performance in the development of embedded firmware for the Eos BMS. This role involves managing a team of engineers using the V-model of software design, driving safety-critical compliance with UL 60730 Annex H, and ensuring seamless integration of firmware with hardware components like STM32 microcontrollers, CAN/CANFD, RS-485 protocols, ADC-s, etc. Responsibilities • Lead Firmware Development for BMS: Oversee the design, documentation, development, and maintenance of embedded firmware for generations of Eos Battery Management Systems, ensuring adherence to the V-model and compliance with UL 60730 Annex H functional safety standards., • Team Management: Manage, mentor, and develop a team of embedded software engineers, setting performance goals, allocating resources, and fostering a collaborative, innovative environment., • Drive Safety and Compliance: Ensure the implementation of diagnostics, fail-safe mechanisms, and safety features (e.g., overvoltage/undervoltage protection, electrolyte monitoring) in BMS firmware, aligning with UL 60730 Annex H requirements., • Strategic Oversight of Communication Protocols: Guide the team in designing and implementing communication interfaces (e.g., CAN/CANFD, RS-485, I2C) for real-time data transmission and control of battery systems., • Collaborate on Hardware-Software Integration: Partner with electronics engineering leads to ensure robust integration of firmware with BMS hardware, including sensors, ADCs, and power electronics, while overseeing validation and performance testing., • Hardware-Software Integration: Collaborate with hardware engineers to ensure proper integration of firmware with BMS hardware components, including sensors, and power electronics, conducting safety validation and performance testing., • Process Improvement: Develop and refine embedded software engineering processes to enhance efficiency, reliability, and scalability of BMS development., • Documentation and Standards: Oversee the creation of comprehensive technical documentation (e.g., design specifications, test plans, compliance reports) and ensure traceability and quality per V-model methodologies., • Cross-Functional Collaboration: Work with other departments (e.g., product management, etc.) to align embedded software efforts with company goals and support troubleshooting tools and commissioning processes., • Roadmap Development: Contribute to the strategic planning of future BMS product features and enhancements, aligning with Eos’ clean energy mission., • Ensure a safe work environment by following health and safety guidelines and policies., • Root Cause Analysis: Lead investigations into firmware-related failures, implementing corrective actions to improve system reliability., • Champion a culture of continuous learning by staying updated on advancements in BMS design, microcontroller platforms, and safety standards., • Other duties, responsibilities and activities may change or be assigned at any time with or without notice. Knowledge, Skills, and Abilities • Leadership Expertise: Proven ability to lead and inspire a team of embedded software engineers, balancing technical guidance with managerial oversight., • Technical Proficiency: Strong background in C/C++ for embedded systems, real-time operating systems (RTOS), and microcontroller-based development (e.g., STM32 family)., • Safety Standards Knowledge: Deep understanding of IEC 60730 Annex H and its application to safety-critical embedded systems., • Communication Protocols: Expertise in CAN bus, CANFD, RS-485, SPI, I2C, and other protocols relevant to battery systems., • Problem-Solving: Exceptional ability to troubleshoot complex software and hardware integration issues and implement scalable solutions., • Project Management: Skilled in managing timelines, resources, and deliverables in a fast-paced engineering environment., • Collaboration: Excellent interpersonal and communication skills to work effectively with cross-functional teams and clearly articulate technical concepts., • Knowledge of embedded security practices (e.g., secure bootloaders, encryption). Education and Experience • Bachelor's degree in electrical engineering, computer engineering, or related field required., • Master's degree in electrical engineering, computer engineering, or related field preferred., • Minimum of 8 years' experience. Travel • Local Travel: Less than 10%, • Overnight/North America: Less than 10% Working Conditions • Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 25 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body., • Factory - The worker may be subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, vibration, moving vehicles, electrical current, exposure to temperature changes or exposure to chemicals. While performing the duties of this job, the employee may be exposed to fumes, airborne particles, odors, dust, mists, and gases. The noise level in the work environment can be loud. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Machinery operation requires the use of safety equipment to include but not limited to eye safety glasses, hearing protectors, work boots, and lab coats. May be required to exert up to 50 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body., • Customer/Partner Locations – Employee may visit customer or partner locations that may be comprised of office, manufacturing floor, laboratory environments and construction sites depending on the location and reason for visit.

Position Overview: We are seeking a hands-on and detail-oriented Process Engineer to join our dynamic manufacturing operations team. This role is critical in supporting yield improvement, day-to-day production troubleshooting, and new product introduction (NPI) within a fast-paced 24/7 high-volume production environment. You will work directly on 3rd shift (11 PM – 7 AM) to ensure optimal performance of processes, effective support to production teams, and smooth onboarding of new products. This position is an excellent opportunity for engineers looking to make a significant impact in advanced manufacturing operations, supporting blue-chip customers with world-class standards for quality and delivery. The Process Engineer will be expected to work daily on-site in our Somerset, NJ office. • Covering weekend shifts will be required occasionally. Key Responsibilities: • Provide real-time process support for production teams on the afternoon shift, ensuring minimal downtime and swift issue resolution., • Analyze and improve manufacturing yields, identifying root causes of scrap, rework, and process variation through data-driven methods (e.g., SPC, FMEA, 5 Whys, Fishbone)., • Lead or support new product introduction (NPI) activities, including process validation, work instruction development, and ramp-up readiness., • Collaborate with cross-functional teams (Quality, Maintenance, Operations) to drive continuous improvement initiatives focused on cost, efficiency, and throughput., • Develop and maintain standard operating procedures, process documentation, and training materials for manufacturing staff., • Support implementation of Lean manufacturing and Six Sigma techniques to reduce waste and improve process control., • Monitor key performance indicators (KPIs) for yield, cycle time, downtime, and quality, with regular reporting and action planning., • Participate in audits, customer visits, and internal reviews as a technical subject matter expert for assigned process areas., • Ensure compliance with safety, quality, and regulatory standards applicable to manufacturing operations Other Important Responsibilities: • Consistently demonstrate the ability to prioritize tasks to ensure most critical processes impacting business results are being addressed., • Thorough documentation of existing processes and new process development, inclusive of progressive results, specific equipment parameters and work instructions where appropriate., • Other miscellaneous duties as assigned. Qualifications: • Bachelor's degree in Manufacturing, Mechanical, Industrial, or Chemical Engineering (or equivalent field)., • A minimum of 5 years (or more) of experience in a high-volume manufacturing environment (preferably supporting 24/7 operations)., • Proven experience in yield improvement, root cause analysis, and process troubleshooting., • Familiarity with NPI processes, including process validation and production readiness., • Strong working knowledge of Lean, Six Sigma, SPC, and other process control methodologies., • Proficiency with data analysis tools (Excel, Minitab, JMP, etc.) and manufacturing systems (MES, ERP)., • Excellent communication and collaboration skills across shifts and cross-functional teams., • Willingness to work on the afternoon shift (11 PM – 7 AM) and occasionally support coverage across other shifts as needed., • Experience in regulated manufacturing (e.g., automotive, aerospace, electronics, or medical device)., • Six Sigma Green Belt or Lean certification., • Hands-on experience with automation systems, sensors, or high-throughput equipment. Physical requirements and work environment: • Must be able to lift 20 lbs;, • Must be able to sustain office work for 8+ hours per day including the following:, • Sitting in an office chair, • Typing, • Reaching for the telephone, • Standing at office equipment, • Hearing for phone use, • Sight for computer use, • Must be able to sustain factory work as needed including the following:, • Standing at machinery, • Reaching and pulling to operate machinery, • Sight for machinery operation, • Walking through shop, • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended.

Job Description Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customer’s products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along the distribution process. HOW YOU WILL CONTRIBUTE (Overview & Key Responsibilities): As a Production Team Lead you will be responsible for the proper conduct of the entire team on their shift. The Production Team Lead must achieve the set targets and ensure value-added production by maximizing the yield. The employee will be tasked to review, comment on and propose solutions for optimal performance ratios. Ensure compliance with health and safety on their shift. They may be called upon to collaborate with other departments depending on production and management needs. • The Production Team Lead will ensure that all operations are carried out correctly; enter production in the system and print production sheets., • Ensure that production personnel have all materials and equipment necessary to start their work according to production schedules., • Implement, train and deliver the standard operating procedures established for each workstation. Ensure the proper training and the correct filling of the production sheets, • Ensure scheduling, control workflow, using data indicators to plan workload, ensuring production to better meet Cryopak's targeted targets., • Maintain and enhance the efficiency of production, initiate and implement continuous improvement projects, and work with the Director of Operations to implement new processes., • Shift responsibility for maintenance ensuring all lines are operating at required capacities. Working objectively to solve problems and minimize downtime., • Ensure the training of new employees and the smooth running of production activities. WHAT YOU NEED TO SUCCEED (Qualifications): • High school diploma or equivalent, • 3 years of manufacturing experience in a similar position, • Must be bilingual (English & Spanish), • Ability to use MS Office, including Excel, • Strong organization, analytical, and management skills, • Strong communication skills (written & oral), • Ability to drive a forklift is a plus WHAT WILL SET YOU APART (Competencies): • Ability to work under pressure, • Leadership skills, • Ability to work under low supervision, • Strong interpersonal skills., • Excellent work ethic, • Ability to work in a team, • Ability to work with other departments, • Ability to work overtime and be flexible in work hours as needed WHY JOIN US: At Cryopak, we strive to offer a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Basic Life and AD&D / Voluntary Life and AD&D, • Short-Term Disability, • Long-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job Title: Production Supervisor “D” Shift Department: Operations Reports To: Production Manager The Production Supervisor Shift D schedule is as follows: Thursday-Saturday 6PM-6AM Wednesday 12AM-6AM Job Summary The Production Supervisor is charged with overseeing the manufacturing process to ensure it runs smoothly, efficiently, and safely. They plan and organize production schedules to meet targets and customer demands, monitor processes for efficiency, and ensure products meet quality standards through inspections and corrective actions. The supervisor leads and guides production workers, enforces safety protocols and training, coordinates equipment maintenance, and identifies opportunities for process improvements. They maintain accurate production records and generate reports for management while ensuring compliance with company policies and safety regulations. Essential Functions • Follow-up implementation of company standards for products and processes during shift responsibilities., • Be on the shift 15 minutes prior to your scheduled time to meet with the outgoing supervisor and meet and brief the incoming supervisor for a smooth transition and effective hand off between shifts., • Provide timely and accurate reports on production metrics, issues, and improvements to management., • Supervise the entire production operation, shifts, lines and other related functions., • Supervise the training of production line employees and spend time with new trainees., • Responsible for managing the scheduling of hourly production personnel., • Review Data in IFS Quick Reports and other production related documentation., • Assist in maintaining the standard in the timing of Resin Blends and line changes and operating procedures., • Guarantee all byproducts are correctly recorded in the IFS system prior to transporting them to the reprocessing department., • Validate/enforce safe operation, complying with corporate accident prevention program, and following safe work practices., • Conduct initial workplace accident investigations and report all injuries on the shift., • Assist with required safety meetings with shift employees., • Make sure that all equipment is maintained and operated according to GMP practices., • Collaborate with Cooperate with maintenance department in required maintenance of equipment and facilities., • Complete and maintain all company standard process & compliance records., • Confirm that quality products are consistently provided and coordinate with the transportation department to ensure On Time delivery of products., • Conducts business with the highest degree of honesty, integrity, and professionalism., • Promotes Company EEO policies, and other AAP and local work policies., • May be required to perform other duties not listed within the job description. Qualifications & Experience REQUIRED QUALIFICATIONS: • High School degree or equivalent required., • Minimum one year of experience in blown film extrusion or similar manufacturing environment., • Understanding extrusion processes, materials and equipment., • Knowledge & Employment Standards TECHNICAL SKILLS & CORE COMPETENCIES: • Extrusion process knowledge., • Understanding of the blown film extrusion process, including machinery operation, polymer properties, and film characteristics., • Familiarity with extrusion machinery, including blowers, dies, and chillers., • Ability to troubleshoot and perform basic maintenance on extrusion equipment., • Knowledge of quality assurance processes, including testing methods for film thickness, strength, and clarity., • Experience with statistical process control (SPC) and data analysis., • Knowledge of Microsoft Office and ERP Systems. SOFT SKILLS & ORGANIZATIONAL CULTURAL FIT: • Ability to lead, motivate, and develop a team, fostering a collaborative work environment., • Strong verbal and written communication skills for effective interaction with team members, management, and other departments., • Demonstrates capacity to identify issues quickly and implement effective solutions under pressure in professional settings., • Ability to prioritize tasks, manage time effectively, and meet production deadlines., • Demonstrates proactive approach to seeking opportunities for process improvement and innovation in professional settings., • Must be competent to analyze data and make informed decisions and take responsibility for team performance and production outcomes in professional settings., • Ability to come up with a proactive approach to seek opportunities for process improvement and innovation. Working Conditions: • Work is performed in a manufacturing/plant environment with exposure to dust, noise, heat, and chemicals., • Requires the ability to move throughout all production and packaging areas of the facility., • Must be able to stand for extended periods of time, ranging from 8 to 16 hours per shift., • Must be able to frequently stoop, bend, lift, and carry materials weighing up to 50 lbs., • Ability to climb fixed and portable ladders up to 20 feet and work around, on, or under machinery as needed., • Must be able to work in high-temperature environments up to 110°F., • Requires the ability to push, pull, and maneuver wheeled equipment weighing up to approximately 150 lbs., • Must comply with all safety procedures and wear required personal protective equipment(PPE) at all times. Benefits • Comprehensive health insurance (medical, dental, and vision coverage), • 401(k) retirement plan with company matching contributions, • Generous paid time off (PTO) and company holidays, • Professional tuition reimbursement and development assistance, • Competitive employee referral program, • Inclusive, collaborative, and supportive work culture DISCLAIMER This job description is not an exhaustive list of all duties, responsibilities, and qualifications associated with the job. All American Poly reserves the right to modify this job description based on business needs. Physical demands and environmental conditions may vary based on job location and duties. All applicants must be able to perform the essential functions of the position. Job Type: Full-time Benefits: • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Paid time off, • Professional development assistance, • Referral program, • Tuition reimbursement, • Vision insurance Shift availability: • Overnight Shift (Required) Ability to Commute: • Piscataway, NJ 08854 (Required) Work Location: In person

Job Description Shift Leader Our first Smashburger restaurant opened in 2007 with one single notion in mind; to serve a better burger! Better burgers takes better service, support and teamwork. That's why we treat our team members fairly in a diverse and safe environment. With an average of 10 restaurants opening each year, we invest in building internal opportunities for our teams’ learning and growth.” We just build better. Better Burgers. Better Teams. Better Experiences. Better Benefits: Build a better experience work & lifestyle! • Tip share-earn up to $2/hr. extra in tips, • Get Paid $ to Refer your Friends*, • RGMs, RMs, & SLs are entitled to one (1) free meal each shift they work *, • Flexible schedules in a fun, family friendly, team environment, • Medical, Dental and Vision Options**, • Paid time off – vacation and sick**, • 401K match (21 and older), • Employee Assistance Program, • Fast track for career opportunities and management experience, • Free uniform **Eligibility based off of time in position and average hours worked *Referred Employees Must Be in Good Standing & Referee must be employed with Smashburger at time of payout. Bonus is paid in two distributions Shift Leader Responsibilities • Reporting to the Restaurant General Manager, our Shift Leaders are the champions of better burgers! In this role you will:, • Manage the performance of both FOH & BOH employees, • Promote a fun and positive work environment, • Manage the effectiveness of people focused processes and systems, • Provide initial and ongoing training to all employees within the unit utilizing SmashConnect, LMS, and 4 step method of training, • Reward and recognizes employee performance that exceeds company standards, • Manage with integrity the daily completion of operational check lists to include, • Line checks and uniform standards, • Opening/closing check lists, • Safe and deposit logs, • Manage the guest experience metrics (NPS and OSAT), • Manage FSC operational standards daily, • Ensure all food safety standards are followed & in compliance with local health depts., • Exemplify guest service on each shift of the day and communicates SIZZLE service standards to the employees, • Manage the successful onboarding and training for all new employees, • Follow COGS management procedures for food ordering and inventory, • Follow company cash policies to ensure minimal losses through theft or shortages, • Manage daily labor Shift Leader Requirements • Previous Shift Leader Experience, • 90-day completion of train the trainer course, • Flexible to work nights, weekends, and holidays, • Follow Smashburger uniform standards, • Ability to follow all guidelines and procedures set forth by Smashburger, local, state, and federal employment regulations, • Must successfully complete Smashburger training program, • Possess strong communication skills, both written and verbal, to effectively communicate with restaurant management, front line employees and corporate support teams, • People management skills to effectively select, assess, coach/counsel, develop, motivate, and lead restaurant teams, • Excellent attention to detail, • Proven time management, consistency, and organizational skills, • Highly motivated, self-directed, and results driven, • Physical ability to stand for extended periods of time and to move and lift boxes of food/ supplies up to 50 lbs., • Ability to work in high temperatures All applicants and employees have an equal opportunity for employment and advancement within Smashburger. Smashburger is dedicated to the principles of equal employment opportunity. We prohibit unlawful discrimination against applicants, prospective applicants, or employees on the basis of age 40 and over, race, sex, color, religion, national origin, disability, genetic information, sexual orientation, gender identity, military or veteran status, or any other applicable status protected by state or local law. This prohibition includes unlawful harassment based on any of these protected classes. Unlawful harassment includes verbal or physical conduct which has the purpose or effect of substantially interfering with an individual’s work performance or creating an intimidating, hostile, or offensive work environment. We maintain a workplace free of racial slurs and bias. This policy applies to all employees, including managers, supervisors, co-workers, and non-employees such as customers, clients, vendors, consultants, etc. Any conduct in violation of these company policies is also a violation of the law. Employees who engage in, ratify, or perpetuate discrimination, harassment or retaliation will be subject to disciplinary action, up to and including immediate discharge. We use eVerify to confirm U.S. Employment eligibility. https://smashburger.com/job-applicant-privacy-policy We use eVerify to confirm U.S. Employment eligibility.

Job Description Shift Leader Our first Smashburger restaurant opened in 2007 with one single notion in mind; to serve a better burger! Better burgers takes better service, support and teamwork. That's why we treat our team members fairly in a diverse and safe environment. With an average of 10 restaurants opening each year, we invest in building internal opportunities for our teams’ learning and growth.” We just build better. Better Burgers. Better Teams. Better Experiences. Better Benefits: Build a better experience work & lifestyle! • Tip share-earn up to $2/hr. extra in tips, • Get Paid $ to Refer your Friends*, • RGMs, RMs, & SLs are entitled to one (1) free meal each shift they work *, • Flexible schedules in a fun, family friendly, team environment, • Medical, Dental and Vision Options**, • Paid time off – vacation and sick**, • 401K match (21 and older), • Employee Assistance Program, • Fast track for career opportunities and management experience, • Free uniform **Eligibility based off of time in position and average hours worked *Referred Employees Must Be in Good Standing & Referee must be employed with Smashburger at time of payout. Bonus is paid in two distributions Shift Leader Responsibilities • Reporting to the Restaurant General Manager, our Shift Leaders are the champions of better burgers! In this role you will:, • Manage the performance of both FOH & BOH employees, • Promote a fun and positive work environment, • Manage the effectiveness of people focused processes and systems, • Provide initial and ongoing training to all employees within the unit utilizing SmashConnect, LMS, and 4 step method of training, • Reward and recognizes employee performance that exceeds company standards, • Manage with integrity the daily completion of operational check lists to include, • Line checks and uniform standards, • Opening/closing check lists, • Safe and deposit logs, • Manage the guest experience metrics (NPS and OSAT), • Manage FSC operational standards daily, • Ensure all food safety standards are followed & in compliance with local health depts., • Exemplify guest service on each shift of the day and communicates SIZZLE service standards to the employees, • Manage the successful onboarding and training for all new employees, • Follow COGS management procedures for food ordering and inventory, • Follow company cash policies to ensure minimal losses through theft or shortages, • Manage daily labor Shift Leader Requirements • Previous Shift Leader Experience, • 90-day completion of train the trainer course, • Flexible to work nights, weekends, and holidays, • Follow Smashburger uniform standards, • Ability to follow all guidelines and procedures set forth by Smashburger, local, state, and federal employment regulations, • Must successfully complete Smashburger training program, • Possess strong communication skills, both written and verbal, to effectively communicate with restaurant management, front line employees and corporate support teams, • People management skills to effectively select, assess, coach/counsel, develop, motivate, and lead restaurant teams, • Excellent attention to detail, • Proven time management, consistency, and organizational skills, • Highly motivated, self-directed, and results driven, • Physical ability to stand for extended periods of time and to move and lift boxes of food/ supplies up to 50 lbs., • Ability to work in high temperatures All applicants and employees have an equal opportunity for employment and advancement within Smashburger. Smashburger is dedicated to the principles of equal employment opportunity. We prohibit unlawful discrimination against applicants, prospective applicants, or employees on the basis of age 40 and over, race, sex, color, religion, national origin, disability, genetic information, sexual orientation, gender identity, military or veteran status, or any other applicable status protected by state or local law. This prohibition includes unlawful harassment based on any of these protected classes. Unlawful harassment includes verbal or physical conduct which has the purpose or effect of substantially interfering with an individual’s work performance or creating an intimidating, hostile, or offensive work environment. We maintain a workplace free of racial slurs and bias. This policy applies to all employees, including managers, supervisors, co-workers, and non-employees such as customers, clients, vendors, consultants, etc. Any conduct in violation of these company policies is also a violation of the law. Employees who engage in, ratify, or perpetuate discrimination, harassment or retaliation will be subject to disciplinary action, up to and including immediate discharge. We use eVerify to confirm U.S. Employment eligibility. https://smashburger.com/job-applicant-privacy-policy We use eVerify to confirm U.S. Employment eligibility.

When you join Verizon\n You want more out of a career. A place to share your ideas freely — even if they’re daring or different. Where the true you can learn, grow, and thrive. At Verizon, we power and empower how people live, work and play by connecting them to what brings them joy. We do what we love — driving innovation, creativity, and impact in the world. Our V Team is a community of people who anticipate, lead, and believe that listening is where learning begins. In crisis and in celebration, we come together — lifting our communities and building trust in how we show up, everywhere & always. Want in? Join the #VTeamLife. \n \n \n What you’ll be doing \n With your sales experience, ability to efficiently manage your time, excellent customer relations skills, and excitement for technology, you'll deliver outstanding and innovative business solutions that support our technology evolution and the way businesses connect. Whether you're continuously hunting and prospecting for new business or growing existing accounts, you'll consult with customers to identify their business challenges and recommend tailored solutions to solve them and ultimately deliver a powerful return for customers while improving their business and growing our revenue. \n \n\n • \n Developing and qualifying leads within respective territory to drive additional sales opportunities through cold-calling, partner-selling, lead-generation campaigns and modern social selling techniques. \n • \n Gaining new business and incremental revenue to meet sales targets. \n • \n Retaining, managing and growing the existing customer base. \n • \n Educating and exciting customers while leveraging innovative business solutions. \n • \n Building relationships with key decision makers. \n • \n Presenting and creating multi-product solution opportunities. \n • \n Understanding and selling groundbreaking integrated software solutions including Cloud, Security, ISP, VoIP and Google platforms. \n • \n Tracking and reporting progress through sales force automation tools. \n • \n Drive sales, increase service revenue and manage relationships for accounts in the 1–19 Employee Segment \n\n What we’re looking for...\n You’re a self-motivated person who thrives on crafting the right solution to solve a client’s problems. And you are great at explaining how complex technology can solve everyday business problems in a language people understand. Cold-calling feels like a sport to you because meeting new people and discovering their needs is what you enjoy. People seek you out for advice and counsel. You seek to win and take the initiative to close deals and help others around you. You act with integrity. You know that when the team wins, we all win. \n You’ll need to have:\n \n\n • \n Bachelor’s degree or three or more years of work experience. \n • \n Three or more years of relevant work experience. \n • \n Willingness to work in a mobile working model with travel within your assigned geographic sales territory. Expected travel may be up to approximately 50% of the time. \n • \n Valid driver’s license. \n\n \n Even better if you have one or more of the following: \n \n\n • \n A degree - Associates or Bachelor's Degree, or related certifications/college courses. \n • \n Two or more years of business-to-business or outside sales experience, including business acquisition and prospecting/cold calling. \n • \n Technology sales and educational experience i.e., SaaS sales experience, CRM, SalesForce or other client management tools, social media, etc. \n • \n Strong presentation skills in a face-to-face and virtual environment. . \n • \n Experience building and maintaining strong business relationships with all levels of client organizations. \n • \n Ability to work in a fast-paced, self-directed, entrepreneurial environment. \n • \n Ability to manage time and prioritize tasks to accomplish goals. \n • \n Ability to implement feedback and tailor your approach for success. \n\n \n \n \n \n \n Where you’ll be workingIn this mobile role, you'll primarily work from customer or field location(s), with occasional visits to a Verizon location for in-person training and meetings.\n \n Scheduled Weekly Hours40\n \n Equal Employment Opportunity \n Verizon is an equal opportunity employer. We evaluate qualified applicants without regard to veteran status, disability or other legally protected characteristics. \n \n Benefits and Compensation\n Our benefits are designed to help you move forward in your career, and in areas of your life outside of Verizon. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance, identity theft protection, pet insurance and group home & auto insurance. We also offer a matched 401(k) savings plan, up to 8 company paid holidays per year and up to 6 personal days per year, paid parental leave, adoption assistance and tuition assistance, plus other incentives, we’ve got you covered with our award-winning total rewards package. Depending on the role, employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, allowances, etc. Newly hired employees receive up to 15 days of vacation per year, which grows with additional service. For part-timers, your coverage will vary as you may be eligible for some of these benefits depending on your individual circumstances. \n \n The salary will vary depending on your location and confirmed job-related skills and experience. This is a commission based position with the potential to earn more. For part-time roles, your compensation will be adjusted to reflect your hours.\n \n The annual salary range for the location(s) listed on this job requisition based on a full-time schedule is: $37,000.00 - $64,000.00.\n \n \n \n \n \n \n \n \n \n \n \n

Job DescriptionDescription: Arbor Lodging is a leading hotel investment and management company with a growing portfolio of hotels throughout the United States, Mexico, and the Caribbean. We have been entrusted by numerous partners and are approved managers for Marriott, Hilton, Hyatt, and IHG. Our service ethos is proactive and holistic, fostering an environment where guests feel truly welcomed and supported at every interaction. Our culture is people-focused, data-driven, and results-oriented. Summary: The Maintenance Technician performs a variety of maintenance and repair tasks in guest rooms and common spaces to keep the hotel in compliance with safety standards and ensure the safety of hotel guests, associates, and vendors.?This position will perform maintenance and repairs along with preventative maintenance to maintain the physical structure and grounds of the hotel and its property. Duties & Responsibilities: • Maintain the basic upkeep of all room and common areas by ensuring all furniture, appliances, and electrical equipment such as televisions, refrigerators, and light fixtures are in working order, • Organize supplies and make sure equipment is ready for the next day, • Maintain high safety standards – follow guidelines and tell supervisor about any incidents, dangerous conditions, or unsafe equipment, • Take responsibility for the safety and cleanliness of areas inside and outside the hotel, such as the parking lot and pool by conducting periodic tours of the property, • Keep an eye out for improvements – follow the preventative maintenance calendar and keep everything in working condition, • Keep supervisor or duty manager in the loop and notify them of any low-running supplies, • Communicate effectively with the hotel staff, • Maintain a professional and friendly demeanor in the dealings with clients, guests, managers, and other hotel staff, • Take on extra duties as and when the team is in need, • Ability to work a flexible schedule, including weekends and evenings, • Ability to lift, carry, push, pull, or otherwise move heavy objects, • Ability to stand during entire shift, • Additional tasks may be assigned at any given time Requirements: Qualifications: • High school education or GED, • 1-2 Years of hotel maintenance experience, • Customer service experience, • Ability to effectively prioritize tasks, • Thrives in a flexible environment and can switch tasks quickly, • Basic maintenance certification/accreditation preferred, • Is a team player, • Ability to communicate effectively, both verbal and written, • Ability to work weekends and evenings (required) Benefits: • Competitive salary, • Annual review with increase potential, • 401k program with company match, • Medical, Dental, and Vision insurance available to eligible employees, • Wellness benefits available to eligible employees Arbor’s Guiding Principles: Arbor Lodging focuses on Five Guiding Principles to foster a culture where growth, development, and progression thrive within the properties: • Do the Right Thing - Operate and act with integrity in all you do even when it is not convenient., • Lead with Heart - Be kind, passionate and hospitable., • Be Accountable - Take ownership and deliver results., • Aim Higher - Go above and beyond to exceed expectations and pursue thoughtful change., • Celebrate Differences - Embrace diversity; respect individual opinions and ideas. Pay is based upon several factors including but not limited to local labor markets, education, work experience, certifications, etc. We comply with all minimum wage laws as applicable. In addition to your annual salary, we offer a comprehensive benefits package, and 401k contributions (all benefits are subject to eligibility requirements). Arbor Lodging Management provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Arbor Lodging Management complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description Job Description: Facilities Lead Schedule: 1st Shift, Monday–Friday Position Summary The Facilities Lead is responsible for the overall management, maintenance, safety, cleanliness, and regulatory compliance of all facility infrastructure within a plastic cap manufacturing plant. This role maintains ownership of building systems, utilities, grounds, and critical infrastructure, including HVAC, plumbing, air compressors, chillers, storage silos, fire pumps, fire suppression systems, and related equipment. The Facilities Lead ensures facility systems remain reliable and properly maintained, required inspections and preventive maintenance are completed, and accurate documentation is maintained in accordance with company procedures, applicable regulations, and established food safety requirements. This position also coordinates outside vendors and contractors and ensures the facility remains safe, clean, operational, and audit-ready. Essential Duties and Responsibilities Facility, Building & Utility Management • Take ownership of all facility infrastructure, buildings, grounds, utilities, and support systems throughout the manufacturing plant., • Oversee maintenance and servicing of HVAC systems, plumbing, air compressors, chillers, storage silos, pumps, fire protection systems, and related equipment., • Maintain building structures and infrastructure, including roofs, walls, floors, doors, ceilings, drains, lighting, and other facility components., • Coordinate grounds maintenance, exterior cleanliness, landscaping, snow and ice removal where applicable, parking areas, and general property upkeep., • Schedule inspections, preventive maintenance, repairs, and service activities to minimize failures and facility-related downtime., • Identify facility deficiencies, prioritize repairs, and coordinate corrective actions to maintain safe and reliable operations., • Maintain equipment inventories, service histories, inspection schedules, and facility maintenance records. Food Safety, Compliance & Documentation • Ensure facility conditions and maintenance activities comply with applicable food safety requirements, company standards, and site-specific procedures., • Maintain accurate documentation for facility inspections, maintenance activities, cleaning schedules, sanitation requirements, and regulatory compliance., • Ensure cleaning and housekeeping activities are completed and documented according to established food safety procedures., • Maintain applicable pest control records, facility inspection reports, service documentation, and corrective action records., • Support internal and external audits by ensuring required documentation is current, organized, and readily available., • Identify and correct facility conditions that could introduce contamination risks or compromise product safety. Vendor & Contractor Management • Coordinate outside vendors and contractors for HVAC, plumbing, utilities, fire protection, building repairs, cleaning, grounds maintenance, and other facility services., • Schedule and oversee service activities to minimize disruption to production., • Ensure contractors follow plant safety, hygiene, access, and food safety requirements., • Review service reports, inspection results, and completed work to ensure requirements are met., • Maintain vendor records, service documentation, inspection reports, and applicable certifications., • Communicate facility needs, repair priorities, and project status to plant leadership. Facility Cleanliness & General Upkeep • Maintain overall ownership of facility cleanliness, housekeeping, and general building conditions., • Coordinate cleaning activities for production support areas, utility rooms, storage areas, restrooms, and other assigned facility spaces., • Monitor building and grounds conditions to ensure they meet established safety, cleanliness, and food safety standards., • Ensure facility deficiencies are documented, assigned, and corrected promptly., • Support 5S and continuous improvement initiatives related to facility organization, cleanliness, and maintenance standards. Safety & Continuous Improvement • Ensure facility systems and equipment are maintained according to applicable safety requirements and manufacturer recommendations., • Coordinate required inspections and testing for fire pumps, fire suppression systems, and other safety-critical infrastructure., • Track inspection schedules and promptly escalate deficiencies requiring specialized or emergency attention., • Follow applicable lockout/tagout (LOTO), contractor safety, and permit requirements when coordinating maintenance work., • Identify opportunities to improve utility efficiency, reduce facility costs, prevent equipment failures, and strengthen compliance practices. Qualifications & Requirements • High school diploma or GED required; technical training in facilities maintenance, HVAC, plumbing, industrial maintenance, or building systems preferred., • Previous experience in industrial or manufacturing facilities management or maintenance required., • Working knowledge of HVAC, plumbing, industrial utilities, building systems, and general property maintenance., • Experience coordinating contractors, service providers, inspections, and facility repairs., • Strong organizational skills and the ability to maintain accurate maintenance, cleaning, inspection, and compliance records., • Familiarity with food safety programs, sanitation requirements, contamination prevention, and audit documentation preferred., • Knowledge of fire protection systems and their inspection and service requirements is a plus., • Ability to manage multiple priorities, identify facility risks, and follow through on corrective actions., • Strong communication, problem-solving, and organizational skills., • Ability to work independently and take ownership of facility conditions, infrastructure, and compliance responsibilities. Work Environment & Schedule First shift, Monday through Friday, in a plastic cap manufacturing facility. The role requires regular interaction with production areas, utility systems, building infrastructure, grounds, contractors, and service providers. Occasional overtime or off-hours coordination may be necessary for emergencies, inspections, or critical facility repairs. Performance Expectations Success in this role is measured by the ability to: • Maintain reliable operation and upkeep of facility systems, buildings, and grounds., • Keep required inspections, servicing, and documentation current and organized., • Ensure facility cleaning and maintenance records meet established food safety requirements., • Maintain facility conditions that support audits, product safety, and regulatory compliance., • Coordinate vendors effectively and ensure contracted work meets plant requirements., • Identify and resolve facility deficiencies before they result in equipment failures, safety hazards, contamination risks, or compliance issues., • Maintain a clean, safe, organized, and audit-ready manufacturing facility. About MRP: MRP Solutions (MRP), a plastic cap manufacturer, is a leading provider of high-quality, injection molded plastic closures, jars and packaging components used every day by millions of consumers around the globe. But we offer more than just plastic caps and lids – we deliver industry-leading packaging solutions tailored to each customer’s unique requirements, providing best-in-class product protection while ensuring consumer confidence. MRP Solutions combines extensive packaging expertise with a consultative approach to reliably uncover customer needs. By understanding your business goals, we can tailor smarter, safer, and more flexible packaging solutions that reduce cost and increase speed to market, helping your businesses capitalize on opportunity. By constantly innovating, MRP enables our customers to grow, making us a preferred partner. We are passionate about partnering with distributors and manufacturers who understand that plastic caps and lids are a small but important part of how people experience their brands. Together, we deliver packaging with purpose. Our Vision: We deliver industry-leading packaging solutions tailored to each customer’s unique requirements, providing best-in-class product protection while ensuring consumer confidence. By constantly innovating, MRP enables our customers to grow, making us a preferred partner. Our Values & Beliefs • Integrity – We have the courage to act with the highest level of integrity, even when no one is watching. We do what is right 100% of the time., • Value Creation – The sole reason a company exists is to create real long-term value for society. This starts with ensuring human safety, as value cannot be created without first protecting human life. We seek opportunities for mutual benefit with all of our stakeholders, including customers, employees, shareholders, suppliers, and the communities in which we operate. In everything we do, our overarching goal is to deliver superior results.., • Accountability - We are accountable to each other and to our stakeholders. We say what we do and do what we say. We embrace a culture of ownership, empowering and equipping employees with the ability to own their outcomes., • Entrepreneurial - Everyone thinks and acts like owners, employing good economic and critical thinking skills while adopting the risk profile of our shareholders. We are inquisitive, constantly seeking out opportunities to improve, actively searching for and innovating across each and every aspect of our business. We relentlessly strive to understand and profitably anticipate what our customers need and value, because if our customers do not grow, we do not grow., • Respectful and Friendly – Everyone deserves to be treated with respect and dignity. Because everyone's perspective has value, we embrace diversity of thought, background and experiences. We are friendly and lead with a smile. What we do is important, but how we do it is what makes it impactful., • Change - We actively seek out and embrace change wherever profitable. Because society is constantly identifying and employing new and better ways of accomplishing tasks, we must constantly innovate, reinvent and, ultimately, destroy the old ways of doing business. We actively engage in rigorous debate and embrace challenge to ensure we stay relevant and deliver superior results., • Fulfillment – Our employees are the foundation of our success. We foster an environment enabling our employees to learn, grow and accept more accountability as they demonstrate capability. We promote more than just individual connection as community at work brings people together through common interest, objectives or experiences. MRP Solutions is an equal opportunity and affirmative action employer. We do not discriminate in recruiting, hiring or promotion based on race, color, religion, sex (including sexual orientation, gender identity or expression, transgender status), national origin, age, disability, medical condition, marital or protected veteran status or any other basis or characteristic prohibited by applicable federal, state, or local law. Consistent with the obligations of state and federal law, MRP Solutions will make reasonable accommodation for qualified individuals with disabilities. Any employee who needs reasonable accommodation should contact Human Resources.

Job DescriptionLevel 1 Pre Weigh Technician Reliance Vitamin LLC Location: 3375 Park Ave- Unit 1, Edison, New Jersey | On site Department: Pharmacy Reports to: Pre-Weigh Lead, with oversight by the Warehouse Operations Manager Schedule: Monday – Friday; 5:30am -1:30pm Employment type: Full time| NonexemptPay and benefitsBase pay: $19.00 per hour. Starting pay reflects job-related experience, skills, and qualifications. Additional compensation: None Benefits: Medical, dental, vision, life, disability coverage; retirement (401K) benefits; accrued PTO and Sick time; paid holidays; sick leave; $50 free vitamins and supplements (monthly) from company store and Deep Employee Ownership (DEO)shares granted after 1 year of employment Overtime is paid at one and one-half times the regular rate for hours worked over 40 in a workweek, as required by law.About the roleOrganize, weigh, and record raw materials for production work orders in our dietary supplement manufacturing operation. Use pre-weigh tools, calibrated scales, and Deacom software to document weights, lot numbers, and quantities according to formulas and current good manufacturing practices (cGMP). Work independently and with Receiving, Warehouse, Blending, and Manufacturing to prepare materials accurately for downstream production.Essential responsibilities • Read, understand, and follow batch records, pick lists, standard operating procedures (SOPs), and work instructions., • Process work orders and other computer transactions; use Lean Kit for scheduling and related work assignments., • Identify and distinguish colors used on raw-material labels, status labels, and safety markings when required by approved procedures to verify materials and prevent mix-ups, with or without reasonable accommodation. Confirm material identity and status using written identifiers, lot numbers, and batch records; report discrepancies before weighing or using materials., • Cross-check picking lists against physical materials before weighing; use basic math to calculate required quantities and proper weigh-ups., • Weigh raw materials using calibrated scales, pre-weigh tools, and approved procedures. Track weighed quantities, remaining amounts, and partials in the scale system., • Accurately record weights, lot numbers, quantities, and material details in batch records and Deacom., • Correctly label materials and stage or move completed weigh-ups to designated warehouse locations; record corresponding inventory transactions., • Keep pre-weigh areas organized and materials properly identified, segregated, and handled according to cGMP requirements., • Immediately report discrepancies, damaged materials, and out-of-specification findings to the Lead, Supervisor, or Quality., • Follow safety, hygiene, and GMP procedures. Perform other related duties consistent with training, safety requirements, and applicable law. Required qualifications • High school diploma or equivalent., • Basic math skills for weights, measurements, counts, and material quantities., • Ability to read and understand the English-language batch records, pick lists, SOPs, and safety instructions used for this position; complete required records and communicate work and safety information effectively. English proficiency is required only to the extent needed for these job duties., • Basic computer and documentation skills to record production data accurately and use work order, scheduling, and inventory systems., • Ability to follow SOPs and cGMP requirements; attention to detail to recognize material discrepancies, inconsistencies, defects, or equipment concerns., • Basic mechanical aptitude to use pre-weigh tools, scales, and related equipment safely within training and authorization., • Ability to organize tasks in a fast-paced manufacturing environment and work independently and with other departments while meeting quality and productivity expectations., • Ability to work the stated schedule and meet attendance expectations, subject to legally protected leave and reasonable accommodation.Preferred qualificationsExperience in solid dosage manufacturing or a GMP environment; familiarity with batch records or production documentation; and experience with basic mechanical equipment or machinery operation are preferred.Physical demands and work environmentWork involves lifting and moving items weighing up to 50 pounds, bending, stretching, and standing for extended periods during the shift. Duties take place in pre-weigh, warehouse, and manufacturing areas and involve working around moving machinery. Essential functions may be performed with or without reasonable accommodation, including appropriate material-handling equipment, assistance, or other effective accommodations. Employees must follow applicable safety and hygiene procedures and use required protective equipment.Equal employment opportunityReliance Vitamin LLC is an equal opportunity employer. Employment decisions are based on job-related qualifications without regard to race, color, religion or creed, national origin, ancestry, nationality, age, sex, pregnancy or breastfeeding, sexual orientation, gender identity or expression, marital status, civil union or domestic partnership status, disability, genetic information, atypical hereditary cellular or blood traits, military service or protected veteran status, or any other status protected by federal, New Jersey, or local law. Retaliation for exercising legally protected rights is prohibited.Reasonable accommodationsWe provide reasonable accommodations as required by law, including for disability, pregnancy, childbirth or related medical conditions, and religious practices. Contact Human Resources at HR@reliancevitamin.com to request an accommodation during the application process or for essential job functions. Requests are evaluated individually through an interactive process. Powered by JazzHR pGEObzG8M3

Job Description Job Description Date 10/2025 Location 1300 Airport Road, North Brunswick NJ Title Maintenance Mechanic - MFG Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Maintenance Mechanic is responsible for maintenance, repair and troubleshooting, Processing equipment such as conveyors, blowers, sifters, burners, grinders, conventional & high-speed encapsulation equipment, vacuum & hydraulic pumps, air compressors, fluid bed dryers, coating machines, granulators, tablet compression machines, etc. Areas of Responsibility Level 1 – Mechanic, Maintenance (MFG) Mechanic supports routine maintenance, equipment cleaning, basic troubleshooting, and minor repairs under supervision. Ideal for those newer to manufacturing maintenance, this role focuses on learning and executing tasks safely and accurately. Employees at this level operate under close supervision. They apply foundational mechanical and electrical knowledge to assist in setup, repair, troubleshooting, and maintenance of manufacturing equipment. Independent judgment is limited; more complex tasks are escalated to higher levels. Key Responsibilities: • Perform disassembly, cleaning, and setup of basic production equipment., • Assist senior technicians in scheduled maintenance tasks., • Replace small parts (belts, hoses, filters) with direction., • Learn and follow cGMP and safety procedures., • Complete daily logs, maintenance checklists, and safety forms., • Participate in basic troubleshooting with guidance., • Respond to facility and equipment issues under supervision., • Operate forklifts and lifts (certification preferred). Level 2 – Mechanic, Maintenance (MFG) Mechanic requires the ability to independently perform equipment maintenance, moderate troubleshooting, and lead to smaller repairs. Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply solid mechanical and electrical skills to set up, repair, troubleshoot, and maintain equipment. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Conduct intermediate-level repairs on packaging and processing equipment., • Troubleshoot mechanical, pneumatic, and electrical systems., • Use diagnostic tools (calipers, micrometers, multimeters, etc.)., • Coordinate with vendors to address equipment issues., • Maintain spare parts inventory and request supplies., • Operate and maintain boilers, HVAC, pumps, and compressors., • Record maintenance activities accurately in logbooks and systems., • Train and mentor Level 1 Technicians., • Support emergency calls and on-call rotations. Level 3 – Mechanic, Maintenance (MFG) Mechanic are highly skilled professionals who lead complex repairs, system diagnostics, and project-based maintenance work. They serve as subject matter experts and may act as a shift lead. Employees operate with minimal to no supervision. They are trusted to independently plan, diagnose, repair, and maintain complex manufacturing equipment. They make high‑level judgments, lead projects, and serve as technical experts and advisors. Employees work closely with the engineering team to identify mechiancal issues, processing issues and propose process improvement measures mechiancally to improve productivity and effeciency of equipment. Have a deep understanding of the process and equipment being used. Key Responsibilities: • Lead troubleshooting and repairs of high-speed and complex machinery (e.g., encapsulators, fluid bed dryers, tablet presses)., • Diagnose and resolve advanced mechanical/electrical problems., • Manage and execute preventative maintenance programs., • Read and interpret advanced schematics, blueprints, and manuals., • Serve as a technical liaison between departments and vendors., • Lead regulatory inspections (OSHA, EPA, etc.) support and documentation., • Mentor and train Levels 1 and 2 staff., • Plan and coordinate plant shutdowns and major repirs., • Champion safety and compliance across the facility. Requirements Education & Qualification: Level 1 – Mechanic, Maintenance (MFG) • High School diploma or GED required., • 0–2 years in maintenance experience in a manufacturing environment, • Basic mechanical aptitude and tool familiarity., • Ability to follow written SOPs and safety protocols., • Willingness to work flexible shifts and overtime., • Forklift experience is a plus. Level 2 – Mechanic, Maintenance (MFG) • High school graduate or GED equivalent, Technical or vocational training is a plus., • 3+ years of hands-on maintenance experience in manufacturing., • Strong understanding of safety, compliance, and regulatory standards., • Knowledge of cGMP, OSHA, and equipment schematics., • 1+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred. Level 3 – Mechanic, Maintenance (MFG) • Must have a high school diploma or GED equivalent, • Associate degree, technical certification, or vocational training is a plus, • 5+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred., • Advanced understanding of mechanical, pneumatic, and electrical systems., • PLC troubleshooting experience preferred., • Strong leadership and communication skills., • Ability to work independently with little to no supervision., • Trade certifications in HVAC, electrical, pneumatics, or hydraulics are highly preferred. Certifications, Licenses, Credentials: • License or certifications in electronics, pneumatics and/or hydraulics preferred., • Forklift /scissor lift driver’s certification is a plus but not a requirement. Skills & Ability • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined t