Trabajos systems en Perth Amboy, New JerseyCrear alertas

Job Title: Special Procedure Technologist Location: RWJUH Rahway Hospital Department Name: Cardiac Catheter Lab Req #: 0000235432 Status: Hourly Shift: Day Pay Range: $44.91 - $55.62 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Special Procedures Technologist – RWJBarnabas Health At RWJBarnabas Health, the Special Procedures Technologist plays a critical role in patient care and operational excellence. Operating with a high level of independence, they perform complex special radiology angiographic and interventional procedures according to strict medical, legal, and professional imaging standards. They are responsible for exercising professional judgment during scans, ensuring accurate patient positioning, delivering age-specific care, and maintaining seamless workflow collaboration within the imaging department. A typical day for a Special Procedures Technologist may include: • Prepares patients for procedures, clearly explains the process, and positions patients for rapid sequence filming during contrast media administration, • Operates diagnostic equipment, fluoroscopy tools, computers, and applications necessary to ensure a safe and accurate diagnostic and therapeutic procedure, • Assist physicians during angiographic and interventional procedures by scrubbing, circulating, or monitoring activities, • Sets up sterile trays and other equipment following aseptic technique, handles instruments, and scrubs to assist with the passage of catheters and guidewires, • Calibrates, maintains, and adjusts equipment, and reports equipment failures or other problems immediately to the appropriate support or departmental leadership, • Monitors and calls out equipment readings, alerting the physician immediately to any changes in patient condition, • Utilizes ICVS and PACS systems to enter accurately identified and labeled images of patients, and retrieves old images and films when necessary, • Demonstrates working knowledge of procedure protocols including prep, positioning, markers, safety, and shielding techniques, • Collaborates professionally in an invasive or surgical environment, working in close cooperation with physicians, nurses, and other technical staff, • Demonstrates initiative, flexibility, and the ability to assume multi-task duties and function under significant time pressures This role might be for you if: • Clear, compassionate communication defines how you interact with patients, families, and colleagues, • Attention to detail and clinical precision guide your work every day, understanding that errors have serious consequence, • You remain calm and highly adaptable while managing a fast-paced retail environment, • Patient safety, accurate drug evaluation, and delivering high-quality pharmaceutical care are your top priorities, • You enjoy working collaboratively with providers, nurses, and interdisciplinary care teams, • Continuous learning, inventory awareness, and operational efficiency motivate you, • Creating a positive, reassuring, and legally compliant patient experience is central to your approach To be considered for this Special Procedures Technologist opportunity: • Graduate of an AMA-approved school of Radiologic Technology (RT) OR graduate of an approved CVT school, • Problem-solving, critical thinking, decisive judgment, collaboration, and the ability to work with minimal supervision, • Must hold and maintain active Basic Life Support (BLS) and Advanced Cardiovascular Life Support (ACLS) certifications through the American Heart Association, • Certification as a Registered Cardiovascular Invasive Specialist (RCIS) is preferred, • Minimum 2 years of Cath Lab or Interventional Radiology scrubbing and hemodynamic monitoring experience is preferred, • Active NJ Certified X-Ray Technologist (NJ CXT) license and National registry with the American Registry of Radiologic Technologists (ARRT) are preferred, • EKG Certification is preferred

Job Description Diesel Mechanic Job Description We are looking for a skilled Diesel Mechanic to join our team at Pinto Brothers Disposal. As a Diesel Mechanic, you will be responsible for performing maintenance and repairs on our fleet of diesel-powered vehicles, including garbage trucks and other heavy equipment. Perform inspection, diagnosis, preventative maintenance, repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment this includes diesel heavy trucks and engines. Utilizing diagnostic software, the Mechanic is responsible for interpreting failure modes and initiate or assign necessary repairs. At times, the Mechanic may be on call, and required to assist with emergency breakdowns. Responsibilities: • · Diagnose and repair mechanical, electrical, and hydraulic systems on diesel-powered vehicles and equipment., • · Perform routine maintenance, including oil changes, tire rotations, and brake inspections., • · Use diagnostic tools and software to identify and troubleshoot problems., • · Communicate with the operations team to ensure vehicles are serviced and maintained according to schedule., • · Maintain accurate records of work performed and parts used., • · Keep a clean and safe work area. Requirements: • · Applicants must be at least 18 years of age and legally eligible to work in the United States., • · A valid driver’s license is required. CDL plus not required, • · Experience working on heavy duty diesel equipment OR training from a recognized trade school is required., • · Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records., • · Must be able to meet the physical and safety requirements of the position., • · Must be able to provide own tools, • · 2+ year’s experience working as a heavy duty Diesel Mechanic, • · Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • · Working knowledge of applicable DOT and OSHA standards and regulations., • · Strong knowledge of diesel engine repair and maintenance., • · Must be able to lift up to 50 pounds and perform physical labor. Frequent squatting and standing is required. If you are a skilled Diesel Mechanic who is looking for a challenging and rewarding opportunity, we encourage you to apply for this position. We offer competitive pay, benefits, and a supportive work environment. To apply, please submit your resume and a cover letter outlining your experience and qualifications. Pinto Brothers Disposal \nCompany Description Pinto Brothers Disposal is a family owned and operated solid waste company established in 1980. We are a Central Jersey company that has been servicing Middlesex and Somerset Counties for over 40 years. We pride ourselves of giving all our customers dependable and professional disposal service. We serve and interact with homeowners, business, corporations, townships, Boards of Education, and management companies to help with their garbage and recycling needs. Pinto Brothers Disposal is a family owned and operated solid waste company established in 1980. We are a Central Jersey company that has been servicing Middlesex and Somerset Counties for over 40 years. We pride ourselves of giving all our customers dependable and professional disposal service. We serve and interact with homeowners, business, corporations, townships, Boards of Education, and management companies to help with their garbage and recycling needs.

Job Description Diesel Mechanic Sayreville, NJ Job Type: Full-time Pay: Competitive salary (based on experience) Job Description: A reputable construction company based in Sayreville, NJ is looking for an experienced Diesel Mechanic to join our team. This role involves maintaining and repairing diesel-powered equipment to ensure safe and efficient operation across our job sites. Responsibilities: • Inspect, diagnose, and repair diesel engines and heavy construction equipment, • Perform routine maintenance and preventative service, • Troubleshoot mechanical, hydraulic, and electrical issues, • Maintain accurate service records, • Ensure equipment meets safety and operational standards Qualifications: • Minimum 3+ years of diesel mechanic experience (construction equipment preferred), • Strong knowledge of diesel engines, hydraulics, and electrical systems, • Ability to work independently and efficiently, • Valid driver’s license (CDL is a plus), • Own tools preferred Benefits: • Competitive pay based on experience, • Overtime opportunities, • Stable, year-round work, • Opportunity for growth within the company Schedule: • Monday to Friday, • Overtime available Work Location: In person – Sayreville, NJ How to Apply: Submit your resume and a brief summary of your experience. Qualified candidates will be contacted for an interview.

Job Description Pay Range: $20-$22 hourly Work schedule: Tues to Sat or Sunday to Thursday - 6:30am to 3pm About Us ADESA, a Carvana owned company, currently operating over 50 locations throughout the US. Our Auto Auctions, some up to 200 acres, provide a wide array of vehicle services including repair & reconditioning, auction remarketing, and many of our sites serve as market hub distribution centers. Our inventory comprises hundreds of thousands of vehicles across North America from retail to commercial, OEM & more. We work in a service industry and embrace a "we" versus "I" culture – help others, and they will help you. Our industry is fun, fast-paced, and competitive – and filled with the best people who are passionate about what they do. We're excited about the future! As an industry leader, ADESA is poised for a multi-year expansion including huge investments in facilities, massive sales growth, and an ever-increasing inventory of vehicles! We are looking for great people who want to take this journey with us! Get a sneak peek into life at ADESA! Role and Team This role supports the ADESA businesses and customers by inspecting vehicles for condition, wear, tear, neglect, missing parts, mechanical issues, previous repairs, and damage/structural damage. Complete required vehicle inspection promptly and accurately including imaging and uploading results of the vehicle condition. Interact with dealers and consumers as needed professionally as the face of ADESA and its collective businesses. Responsibilities • Communicate in a professional manner with customers (dealer or consumer), • Resolve any customer inquiries in a friendly, courteous, and professional manner; advise management of all complaints or incidents, • Ensure internal and external customers receive prompt, efficient, and courteous attention, • Inspect vehicles for signs of wear, tear, neglect, damage, previous repair, mechanical or structural damage., • Complete inspection of vehicles and ensure adherence to the defined program for the customer., • Capture data accurately on a mobile device, and work comfortably with software and technology., • Deliver results in a timely manner, • Maintain productivity levels as set forth by management., • Deliver consistent, accurate inspections with a minimal rate of errors in accordance with reasonable expectations set forth by management., • Collaborate with management and sales team members on customer needs with insights to improve services provided, • Maintain equipment and tools properly and advise the manager of any equipment maintenance or breakdown needed, • Ensure vehicles are in clean condition with radios, seats, mirrors, and other convenience items in the same position as when the vehicle arrives, • Submit completed condition reports using the appropriate technology made available to you to complete the vehicle inspection, • Complete road test if required by contract or inspection type, • Keep current on technology updates, new releases, and product development, • Understand the functionality and ability to use tools such as paint meter, OBD scanner, etc., • Develop and maintain knowledge and expertise in areas of competitor products, • Other duties as assigned. Qualifications • Must be at least eighteen (18) years of age., • Must be qualified to operate a motor vehicle and possess a valid driver's license., • Must have a demonstrated ability to read, write, and communicate effectively in English., • Must have the ability to physically operate vehicle equipment and tools., • 1 year Automotive experience: Repair Shop, Educational, Hobby, • Mechanical Aptitude, • Ability to enter data on a hand held device, • Ability to identify previous repair after appropriate training, • Ability to identify basic mechanical issues (sludge, suspension damage, radiator damage) ADESA Benefits and Perks Competitive Pay | Quality Benefits | Holiday and Paid Time Off | Education and Equipment Reimbursement Programs | Matching 401(k) | Career Path Opportunities | And More! Other Requirements To be able to do your job at ADESA, there are some basic requirements we want to share with you. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. • The physical activity requirements of the position range from Light to Medium Physical Work., • Frequent – standing, watching, touching, listening, walking, talking, • Potential – running, jumping, yelling or other rapid or forceful movement in emergency situations, • Visual acuity requirements include color, depth perception and field of vision comparable to definitions for Clerical, Administrative, Machine Operators (including inspection) positions. Physical Working Conditions This position is subject to both inside and outside environmental working conditions, including temperature changes, outside weather conditions, slightly elevated ambient noise levels, and minor atmospheric conditions affecting skin or respiratory systems, such as fumes, odors and dusts associated with internal and external service station/convenience food and petroleum dispensing operations. • Note: Refer to the Handbook and Policy Manuals for important addendum requirements to all job descriptions. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. To be able to do your job at ADESA, you must be able to read, write, speak, and understand English. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. Legal Stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. ADESA is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. ADESA also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Join the H&S Family of Bakeries – the team behind H&S Family of Bakeries includes Northeast Foods, H&S Bakery and Schmidt Baking Co. – the largest family-owned variety baker in the United States. Headquartered in Baltimore, Maryland, we operate a network of 10 bakeries and 30 distribution centers across the country to deliver fresh, high-quality baked goods nationwide, from fast food and quick-service restaurants to cafeterias, hospitals, grocery stores and universities to name a few. We’re passionate about innovation in manufacturing and distribution, leading the way in the industrial baking industry, while creating opportunities for our people to grow and succeed. Our Core Beliefs: Be Well, Work Well | Create an Experience | Life-long Learning | Do the Right Thing The Maintenance Mechanic 2nd Class plays a pivotal role in supporting operations by maintaining equipment, troubleshooting when problems arise, and repairing machines when broken down. They will perform troubleshooting and repairs for all facets of modern automated equipment. This is a position where a candidate can continue to improve their skills and grow into more advanced roles. In this role, you will: • Answer trouble calls to production equipment., • Perform preventative maintenance routines with precision. Complete assigned work request repairs promptly., • Keep our shop and equipment in tiptop shape, clean and safe., • Conduct test runs on all equipment post repairs or preventative maintenance. Accomplish all related forms and paperwork after the end of the shift Maintain a minimum tool list and carry tools to calls, • Practice and uphold all company policies and procedures, fostering a culture of safety and compliance. Qualifications: • Prior experience in plant maintenance or general commercial mechanic experience. Arrival to work on time consistently., • Work in a fast-paced environment and must also adapt to frequent changes that occur on the production line., • Must possess/maintain a valid license to operate applicable equipment. Read, comprehend and practice necessary safety procedures, signs, etc., • Willing to work irregular and/or rotating shifts, including split days off (non-consecutive days off) and working holidays and weekends as required., • Must be 18 years or older. Essential Physical Requirements: • Ability to lift and carry up to 50 pounds, and push and pull heavy wheeled equipment or carts in a fast-paced manufacturing environment, with or without reasonable accommodation., • Ability to stand and/or walk for extended periods of time during a shift, maintaining a normal range of motion in all extremities., • Ability to reach, bend, stoop, and crouch to access equipment, tools, or materials. Ability to use arms, hands and fingers to handle or operate machinery, tools or controls. Ability to perceive and respond immediately to visual and audible safety alerts and warnings to ensure the safety of self and others in a fast-paced, hazard-sensitive environment with or without reasonable accommodation., • Ability to work in environments with varying temperatures, noise levels, and airborne particles, odors and fumes., • Ability to climb stairs, ladders, or work platforms as required by the position. Ability to sit for prolonged periods using office equipment and computer systems., • Ability to wear required personal protective equipment (PPE) and protective clothing for extended periods of time, with or without reasonable accommodation. What’s in it for you? At H&S Family of Bakeries, we value our team members and work hard to create a workplace where people can grow and thrive. Along with equitable pay, we provide exceptional benefits designed to support you both at work and in life. Our comprehensive and affordable packages include medical, dental, and vision coverage; short-term disability; retirement savings; paid time off; flexible spending accounts; an employee assistance program; and, of course, some very cool company swag. Equal Opportunity Employer: H&S Family of Bakeries is proud to be an Equal Opportunity Employer. We welcome diversity and are committed to creating an inclusive environment for all team members. We consider all qualified applicants without regard to race, color, religion, sex, national origin, political affiliation, sexual orientation, gender identity, marital status, disability, genetic information, age, membership in an employee organization, or any other factor unrelated to merit. Offer Determination Guidelines: The salary range listed for this position is provided in accordance with applicable transparency laws and serves as a general guideline. However, it does not represent a guaranteed salary offer. Actual compensation will be determined based on a variety of job-related factors, which may include but are not limited to relevant experience, skills, education, internal equity, market data, and geographic location, including local cost of living. The final offer may vary outside the posted range based on these considerations. #ZR

Job Description Overview: We are seeking an experienced and highly skilled Automotive Technician A/B (Tech A/B) to join our team. As a Senior-Level Technician, you will handle advanced diagnostics, major repairs, and contribute to the overall excellence of our shop. You’ll also mentor less experienced technicians if needed and help maintain the high service standards that our customers expect. Responsibilities: • Perform complex diagnostics and mechanical/electrical repairs on all kinds of vehicle systems, including engines, transmissions, brakes, HVAC, and electronics., • Use OEM and third-party diagnostic software and scan tools to troubleshoot issues accurately., • Conduct test drives and/or inspections to verify repairs and ensure quality workmanship., • Maintain clear, thorough documentation of all work performed., • Ensure all work is performed in compliance with safety protocols and shop standards. Qualifications: • ASE Master Certification, • Minimum 7 to 10+ years of automotive repair experience in a professional setting., • Proficiency with diagnostic tools, service software, and repair procedures., • Valid driver’s license with a clean driving record., • Ability to lift up to 50 lbs and perform physically demanding tasks., • Strong attention to detail, professionalism, and a commitment to high-quality work and project delivery within requested time frame., • Willingness to take a Drug Test and/or Background Check if requested. Compensation & Benefits: • Salary: $100,000+ annually, depending on experience., • Comprehensive benefits package, including:, • Health, dental, and vision insurance, • 401(k) with employer match, • Paid time off and holidays, • Competitive, performance-based pay structure\nCompany Description Really good automotive shop with high rating and always busy. Really good automotive shop with high rating and always busy.

Job Description We are looking for a Diesel Mechanic to join our team! You will be responsible for repairing various vehicles and transmission systems. Responsibilities: • Repair trucks,, • Perform routine vehicle maintenance, • Use diagnostic tools to test vehicle components, • Perform quality inspections prior to returning the vehicle to the driver Qualifications: • Previous experience as a mechanic, • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Ability to thrive in a fast-paced environment\nCompany Description family owned and operated fast growing trucking and construction company family owned and operated fast growing trucking and construction company

Job Description Why VCI: At VCI, we're dedicated to supporting the emergency responders who serve our communities every day. What sets us apart is our commitment to both our customers and our employees. We offer competitive pay, a 401(k) retirement plan, comprehensive benefits including medical, dental, and vision coverage, paid Holidays and the opportunity to work alongside a team of nearly 100 professionals. Our team includes former and current fire chiefs, EMTs, paramedics, police officers, firefighters, rescue personnel, and skilled industry experts, all working together in state-of-the-art facilities to ensure emergency vehicles remain mission-ready. When you join VCI, you become part of an organization that values teamwork, professionalism, and taking care of its people. Primary Function: This position is responsible for performing the basic diagnostic, repair, and maintenance of light duty trucks or emergency vehicles. Key Responsibilities • Perform basic, routine maintenance, diagnostics, and repairs on light-duty trucks and emergency vehicles., • Assist with the installation and service mechanical systems, suspension components and drivetrains., • Inspect, troubleshoot and repair engine performance, brakes, cooling systems, ignition systems, hydraulic and electrical systems., • Maintain and repair new vehicle set up, • Responsible for maintaining shop equipment and a clean and safe work area, • Ensure all work complies with DOT, NFPA, and other regulatory guidelines as required., • Maintain accurate service records and follow company and industry safety standards., • Manage and report time on tasks., • Wash, clean and prep new vehicles for service., • All other duties as assigned. Requirements: • Applicants must have their own tools and a valid state license., • Basic knowledge of automotive mechanical systems, diagnostics and repair., • Ensure all work complies with Triple KKK standards., • Strong problem-solving skills and the ability to work in a fast-paced environment a plus. Experience: High School Diploma or GED and at least 1 year of experience in an electrical automotive environment or equivalent experience. Knowledge of basic repair disciplines and have the willingness to learn new systems as they relate to emergency vehicles. Driver’s license CDL B with air brake and bus endorsement a plus.

Job Description DIESEL SCHOOL BUS MECHANIC Location: Keasbey, NJ (Woodbridge Twp) George Dapper, Inc. is seeking an experienced, dependable Diesel School Bus Mechanic to join our maintenance team. We are looking for a skilled professional who takes pride in their workmanship, understands the importance of vehicle safety, and can efficiently diagnose, maintain, and repair school buses. Key Responsibilities • Diagnose, troubleshoot, and repair diesel school buses and gas vans., • Perform preventive maintenance and routine vehicle inspections., • Repair and maintain engines, brakes, transmissions, electrical systems, and other mechanical components., • Identify potential mechanical issues and address them before breakdowns occur., • Prepare vehicles for required DOT and New Jersey school bus inspections., • Maintain accurate service records and repair documentation., • Ensure all work meets company safety standards and regulatory requirements., • Maintain a clean, safe, and organized work environment. Qualifications • Previous experience as a diesel mechanic, preferably working with school buses or commercial vehicles., • Strong knowledge of diesel engines, electrical systems, brakes, and general vehicle maintenance., • Ability to diagnose and repair mechanical problems independently., • Experience using diagnostic equipment, power tools, and shop equipment., • Knowledge of DOT safety requirements and preventive maintenance procedures., • Strong work ethic, reliability, and attention to detail., • Ability to work independently and as part of a team., • Mandatory Motor Vehicle Background Check, • Pass a Drug Test, • Have a current TB Test, • Valid Drivers’ License - CDL w/ Mechanic Endorsement A+ Why Join Our Team? George Dapper, Inc. is a third-generation, family-owned transportation company with over 75 years of experience. We value dependable employees, quality workmanship, and a strong commitment to safety. We offer a professional, team-oriented work environment where experienced mechanics can put their skills to work and make a meaningful contribution. Apply today and become part of our Dapper team! 999 Riverside Drive, Keasbey, NJ. 08832 George Dapper, Inc. Is Committed to Transporting Your Children Safely! \nCompany Description Over our 75+ years, we have transported and employed generations of students, parents, friends, and family. We have a dedicated workforce that we consider family. The company has continued to grow as the areas around us have grown, and the need for safe and reliable student transportation has become a necessity in these communities. George Dapper Inc. has expanded to multiple terminals in Middlesex County, New Jersey. We continue to strive to constantly improve, innovate, and rededicate ourselves to the ever-evolving school bus industry. Over our 75+ years, we have transported and employed generations of students, parents, friends, and family. We have a dedicated workforce that we consider family. The company has continued to grow as the areas around us have grown, and the need for safe and reliable student transportation has become a necessity in these communities. George Dapper Inc. has expanded to multiple terminals in Middlesex County, New Jersey. We continue to strive to constantly improve, innovate, and rededicate ourselves to the ever-evolving school bus industry.

Job Description JOB DESCRIPTION: • Diagnose unit repair needs and perform designated repairs on company and customer owned commercial generators/engines as directed., • Perform necessary troubleshooting and notify Service Manager of outstanding issues., • Expected to complete tasks with no/limited supervision., • Demonstrates extremely well developed technical and troubleshooting skills with strong analytical problem-solving skills in their work unit., • Demonstrates the need for continuous self-development and seeks every opportunity to improve their personal, technical, and interpersonal skills., • Verified findings, review readings of gauges and procedures and compare to manufactured specs., • Install, replace, rebuild, or repair the parts and/or equipment in a timely manner and according to specifications, • Consistently follows all Foley safety policies and procedures to include all Personal Protective Equipment being worn at all times, as well as contamination control guidelines., • Willing to respond to after-hour emergency calls as directed by supervisor., • Test the part or equipment and perform quality checks after work is complete., • At the end of shift, secure all equipment and machinery and complete all required paperwork., • Basic computer skills and good interpersonal and communications skills., • The candidate must have a clean driving record and current driver’s license. RECOMMENDED QUALIFICATIONS: • Minimum 3-5 years experience with Cat/Non-Cat power gen units., • Must be able to multitask., • Assist parts department in researching and ordering needed parts., • Strong Computer skills preferred, knowledge of SisWeb and ET. Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.

Job Description HiFyve is hiring Power Systems Technicians in the heavy equipment industry in Piscataway, NJ! Salary: $29.00–$44.00/hr DOE Shift: Full-Time (with after-hours emergency response as needed) Location: On-site – Piscataway, NJ Job Duties and Responsibilities • Diagnose, repair, and maintain commercial generators and engines for company and customer equipment, • Troubleshoot issues and escalate outstanding concerns to the Service Manager as needed, • Remove, replace, rebuild, or repair components to specifications in a timely manner, • Perform testing and quality checks to verify equipment performance after repair, • Review diagnostic readings and compare findings to manufacturer specifications, • Respond to after-hours emergency calls when required, • Follow all safety policies and wear required PPE, including contamination control standards, • Complete required documentation and secure equipment at the end of each shift, • Maintain technical expertise and seek continuous self-development opportunities Education & Experience Requirements • High school diploma or equivalent, • 3–5 years of experience working with power generation units (Cat or Non-Cat) Knowledge, Skills and Abilities • Strong troubleshooting, diagnostic, and repair skills with power systems, • Ability to multitask and assist with parts research and ordering, • Computer proficiency; experience with SIS Web and ET diagnostic software preferred, • Excellent communication and interpersonal skills, • Must maintain a valid driver’s license and clean driving record, • Dependable, safety-focused, and able to work independently with minimal supervision If you are interested, please apply.

Job Description Commercial Electrician with 5+ years of documented field experience to work on warehouse and office and other commercial projects in New Jersey. The work includes basic rough-in, conduit installation, wiring, lighting, devices, and power distribution. Responsibilities • Rough-In Installation: Install metal/PVC conduit (EMT, rigid, PVC), cable trays, and electrical boxes according to layout specs., • Blueprint & Schematic Reading: Interpret complex architectural, electrical, and structural blueprints to route systems accurately., • Wiring & Pulling: Pull main feeders, branch circuits, and low-voltage or power cabling through conduit systems., • Conduit Bending: Bend conduit by hand or using mechanical, hydraulic, and power benders to exact angles and measurements., • Code Compliance: Ensure all rough-in work strictly adheres to the National Electrical Code (NEC) and local municipal codes. Qualifications, • 5 years of verifiable experience working for a commercial electrical contractor., • Proficiency with commercial rough-in, conduit bending, wiring, and terminations., • Previous experience installing rigid and EMT conduit., • Own the tools needed for commercial electrical work., • Safety conscious, • Low-voltage experience is a plus., • Need an Aerial / Scissor lift certification, • Need OSHA 10

Job DescriptionDescription: Summary: Looking for an experienced Electro – mechanic who is eager to learn and grow with Eastern Metal Framing’s fast paced environment. ESSENTIAL DUTIES AND RESPONSIBILITIES · Complete repairs to all machinery, facilities, and utilities per work order request · Prepare and coordinate completion of work orders for regular maintenance and PM of machines, facilities and utilities · Perform all work in a manner consistent with established safety procedures · Perform Preventative maintenance to Electrical / Mechanical functions. · Able to effectively troubleshoot electrical and mechanical failures · Make recommendations for spare parts and notify when items need to be restocked. Requirements: REQUIRMENTS · An in-depth knowledge of electrical, hydraulic, pneumatic, and mechanical processes. · Is familiar with AC-DC-PLC, Motors, Systems. · Ability to read and work from prints, both mechanical, and electrical. · Has the knowledge and skill to use a variety of hand tools and power tools as well as shop tools · Willing to work overtime for emergencies as needed. QUALIFICATIONS · High school diploma or equivalent trade school diploma · 5 years of experience in industrial Maintenance (steel industry preferred)

Position Description Ryder is hiring a Senior Level Diesel Technician in South Plainfield, NJ— providing a stable company for your career with weekly pay and excellent benefits. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/T3 • Hourly Pay: $36.50 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Schedule: Monday–Friday, • Hours: First Shift 11:00 pm – 7:00 am We provide the best State-of-the-Art Diagnostics and Tools to all Ryder Maintenance Repair Mechanics who work on Heavy Duty Vehicles Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Questions? Call Jordon or text “South Plainfield” to904-869-3454to speak with your recruiter today. All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • Earn PTO starting Day 1. Up to 80 hours accrued in 1st year, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Paid training that keeps you ahead, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians At Ryder, you will be recognized and respected for your expertise and skill by joining a community of proud women and men in logistics, including many Military Reservists and Veterans. Ryder provides a clear path for career development and advancement. Share Ryder jobs with people you know-get paid for it. Ryder offers unlimited bonuses up to $1,500 for every hired Diesel Mechanic Technician and Fuel Service Employee. EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Basic diagnostics and repairs, including AC and electrical systems, required, • Three (3) years or more relevant work experience, preferred, • All other certification as required by location, required, • Valid Commercial Driver License (CDL) CLASS A,preferred, • All other certification as required by location, required, • ADDITIONAL REQUIREMENTS:, • Must have a minimum of 2 years of experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc., • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties including:, • Performs standard vehicle maintenance, • Performs preventive maintenance, • Diagnoses complex mechanical and electronic problems utilizing diagnostic computer when applicable, • Completes complex and detailed mechanical inspections & repairs with minimal supervision, • Replaces defective components as instructed, • Works unsupervised on most tasks, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task., • Utilizes key functions of Shop Management System and electronic documentation available., • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)., • Acts as mentor for Tech 1 and Tech 2 levels., • Demonstrate the ability to access and use internal and external maintenance documents., • Other support duties as required to support operations. These could include but are not limited to Service Island support, • SBTIII trained within 180 days (SBT220), • Complete 2 of the OEM On-Line diagnostic scan tool software courses as required by location fleet mi. (predominant OEM of fleet mix completed within 365days) Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 11 hours ago (10/14/2026 8:56 AM) Requisition ID 2026-213220 Location (Posting Location) : State/Province NJ Location (Posting Location) : City SOUTH PLAINFIELD Location (Posting Location) : Postal Code 07080 Category Technicians/Service Employees5 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000356 Min Pay USD $35.00/Hr. Max Pay USD $35.00/Hr.

Responsibilities: As a Permanent Senior HVAC/R Technician, your duties will include but are not limited to: 1. Ensuring compliance with safety and environmental regulations for HVAC/R systems and equipment. Collaborating with the engineering team to design and implement new HVAC/R systems and modifi

Job DescriptionDescriptionClinical Coordinator Location: Old Bridge, NJ Entity: Alliance Orthopedics Reports To: Lead Physician Extender The Clinical Coordinator plays a vital role in the orthopedic department, providing administrative and clinical support to ensure efficient and effective patient care delivery. As a Clinical Coordinator you will be the liaison between our medical providers and patients to monitor procedure plans, connect, follow up and evaluate our patients progress. This position requires excellent organizational skills, strong attention to detail, and the ability to coordinate multiple tasks in a fast-paced environment. Alliance Orthopedics Alliance Orthopedics is a multidisciplinary healthcare organization dedicated to helping patients get back to the activities they love. Our integrated team of medical providers, orthopedic specialists, physical therapists, occupational therapists, chiropractors, athletic trainers, and rehabilitation professionals work together to create a seamless patient experience and deliver exceptional outcomes. What sets Alliance Orthopedics apart is our collaborative approach. Medical and conservative care teams work hand in hand to eliminate barriers, improve communication, and collapse recovery timelines. If you are passionate about movement, recovery, patient education, and helping people return to the activities they love, Alliance Orthopedics offers an opportunity to grow your career while making a lasting impact on the lives of others. Summary of Responsibilities Responsibilities: • Assist in managing the day-to-day operations of the orthopedic clinic, including patient intake, registration, and medical record maintenance., • Serve as a liaison between patients, healthcare providers, and other departments to facilitate seamless communication and collaboration., • Manage and maintain accurate patient records, including medical histories, test results, and treatment plans, in compliance with privacy regulations (e.g., HIPAA)., • Prepare and organize patient charts, ensuring all necessary documentation is complete and available for healthcare providers., • Navigating EMR (Carecloud), being able to find appropriate documents for patient care, being able to write and assist with patient notes, infrequent medical billing, • Facilitate communication and coordination with external healthcare facilities, such as imaging centers and physical therapy clinics., • Assist in quality improvement initiatives, participating in audits, data collection, and process improvement activities. Requirements:, • Bachelor's degree (preferred), • Prior experience in a clinical or administrative role within an orthopedic setting is highly desirable., • Familiarity with medical records management, including electronic health record systems is highly desirable, • Strong organizational and multitasking skills, with the ability to prioritize tasks and manage time effectively., • Excellent interpersonal and communication skills, with the ability to interact professionally with patients, healthcare providers, and staff., • Proficiency in computer applications and software, including Microsoft Office Suite and electronic medical record systems., • Understanding of healthcare privacy regulations, such as HIPAA, and a commitment to maintaining patient confidentiality., • Ability to work collaboratively in a team environment and adapt to changing priorities and situations., • Demonstrated attention to detail and accuracy in handling clinical documentation and patient information. Additional skills/abilities:, • Great verbal and written communication skills, • Strong analytical thinking and ability to be solutions-oriented, • Excellent customer service skills, • Compassion and empathy Alliance Orthopedics is the region's most dynamic multidisciplinary orthopedic practice with nine clinic locations across New Jersey., • Bloomfield, • Fair Lawn, • Union, • Randolph, • East Brunswick, • Middletown, • Freehold, • Old Bridge, • Toms River Benefits:, • 401(k) matching, • Medical, Dental & Vision, • Paid Time Off, • Sick Time, • Paid Holidays Job Type:, • Full-time, on-site, • Multiple locations, • Exempt Background Check Requirement: Employment is contingent upon the successful completion of a background check, which may include verification of employment history, education, criminal records, and other relevant information as permitted by law.

Job Title: Head of Business Development, OMS NORAM (US & Canada) \n Job Location: Edison, New Jersey or Atlanta, Georgia \n \n Purpose of the Role \n\n • Manage Business Development function in the Americas\n, • Direct the RFP process\n, • Direct the management of the sales pipeline\n, • Direct the maintenance of business development reporting at both a regional and global level\n, • Direct both internal and external marketing programs\n, • Direct the identification of new customers and markets\n, • Manage regional pricing in conjunction with global stakeholders\n, • Pursue service excellence, optimum productivity, profitability and effective use of resources\n, • Provide overall strategic leadership and promote a spirit of teamwork\n, • Allocate resources effectively to new customer pursuits, geographies and projects\n, • Ensure service excellence and motivate staff through effective leadership and career-pathing\n, • Act as a senior point of contact and/or escalation for customers\n, • Provide coaching on best practices with the overall objective to constantly improve processes\n, • Actively engage with implementation of new customers and the addition of new functionality with existing customers, in conjunction with Customer Implementation, Business Solutions, Operations and IT teams\n\n \n Key Accountabilities / Roles & Responsibilities / Tasks \n Organizational \n\n • Direct others in the completion of assignments through knowledge sharing\n, • Provide direction and decision support to staff\n, • Direct training and development\n, • Allocate and manage overall team resources including hiring, discipline and termination of tenure\n, • Monitor vacations and sick time and executing reviews and incentive schemes for direct reports and managing HR related issues\n\n \n Operational \n\n • Drive an assigned geography and/or subset of customers, delivering continued pipeline development and new business wins\n, • End-to-end ownership of new customer acquisition, including win planning, value proposition creation and delivery, stakeholder management, and both commercial and technical proposals\n, • Drive new and incremental profitable business through technical sales expertise\n, • Build/maintain sustainable relationships with potential customers\n, • Ensure alignment of different ISC regions and functions as part of building complete winning value proposition for prospective clients\n, • Maintain and develop extensive supply chain management knowledge and expertise that can help differentiate DHL from the competition\n, • Collaborate effectively and extensively with wider DPDHL network in terms of both solution and overall pipeline development\n\n \n Personnel \n\n • Manage staff training and development to promote operational excellence and staff development\n, • Drive performance excellence\n, • Recognize and manage staff diversity, performance and or personality conflicts\n, • Leverage the competencies of project team members and internal/customer resources to enhance project quality and accelerate results\n\n \n Skills and Knowledge \n\n • Demonstrated high level of commitment, very dynamic\n, • Sensitive to urgency and able to work/keep focus under pressure\n, • Very High level of Influencing skills to be used externally and internally\n, • Ability to develop and communicate (internally and externally) complex and integrated commercial solutions at a high level\n, • Fully capable of executing at each stage of the sales cycle – initial relationship development, basic solutions design, systems demonstrations/expertise, presentation building, value proposition construction, and gaining senior executive buy-in\n, • Strong communicator at all levels; from clerical staff to board level both within and external to DHL\n, • Substantial knowledge of all supply chain products – Origin, Freight, DC, Transport, Visibility Systems, and good working knowledge of Contract Logistics (DC and Transport) operations\n, • Systems and/or IT experience is a bonus, including around EDI/API integrations, WMS, ERP, and TMS applications\n, • SaaS experience in either direct or indirect function is preferred but not required\n, • Project management experience a large plus including driving new systemic solutions and/or implementing a product development strategy\n, • Substantial Knowledge of Documentation and Global trade flows across the end to end supply chain\n, • Experience of developing international solutions of no less than 5 years for global customers working at a senior / board level\n, • Excellent Commercial Negotiator at Senior Management / Board level\n, • Experience of working with customers across Sectors and Regions\n, • Demonstrable and High-Level working knowledge of operational and commercial models globally\n, • Understanding of Market Characteristics and Market Dynamics across Sectors and Countries\n, • High Level Change Management experience\n, • Reach decisions under conditions of uncertainty\n, • Strong analytical skills combined with a systematic problem-solving approach\n, • Competency in Microsoft office tools: Word, Excel, PowerPoint, Visio, etc.\n, • Cross-cultural competence\n\n \n Qualifications and Key Requirements \n\n • Education\n, • Bachelor's Degree or equivalent in a relevant business or technical subject.\n, • Master’s Degree or equivalent in a relevant business or technical subject is a plus\n\n \n\n • Experience (Depth & Breadth)\n, • Minimum 5-7 years Business Development experience with expertise in 3PL origin management and destination services; end to end supply chain\n, • Increasingly progressive growth in levels of responsibility and scope\n\n \n Languages \n\n • Fluent in English\n, • Spanish and/or Portuguese are a plus\n\n \n Travel Requirement \n\n • Position has an NORAM responsibility, which requires moderate travel.\n, • National Travel (% away from job location)\n, • 20 to 30%\n, • International Travel (% away from job location)\n, • 10%\n\n \n Pay Range: $141,831.00 - $189,108.00+ (Based on Experience) \n \n Benefits (All Non-Union Employees) \n\n • Compensation: Competitive base salary plus role dependent performance-based incentives.\n, • 401(k) Match: $1-for-$1 match up to 4% quarterly + 2% annual base contribution.\n, • Stock Purchase Plan: Ability to purchase Deutsche Post AG shares at a discounted rate.\n, • Medical: Comprehensive plans covering preventive care, inpatient/outpatient services, and prescriptions.\n, • Vision: Optional coverage for exams, frames, and contacts.\n, • Dental: Optional coverage for preventive, basic, and major services.\n, • Paid Time Off: 7 major holidays, 8 floating holidays, and accrued vacation/sick days.\n\n \n Why Join DHL Global Forwarding? \n At DHL Global Forwarding, we invest in our employees’ growth, providing training, guidance, and career advancement opportunities. We believe in building careers, not just jobs, and empowering our team to develop skills and achieve long-term success. \n Be part of DHL Group, the world’s leading logistics provider, operating in 220+ countries. DHL Global Forwarding (DGF) is a global leader in air and ocean freight, with 30,000+ employees ensuring seamless transport and supply chain solutions. Explore careers with us: DHL Careers. \n \n Equal Opportunity Employer \n DHL Global Forwarding is committed to equal employment opportunities, evaluating all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other legally protected characteristics. \n Work Authorization \n Applicants must be legally authorized to work in the United States. Visa sponsorship is not available for this role. \n \n #LI-RL2

Western Express is now hiring CDL-A Dry Van DriversEarn Up to $100,000 Per Year – 100% No-Touch Freight!Excellent Benefits & Home-Time – Recent Grads Welcome\n A valid CDL-A is required for this position. \n We Offer:\n\n • Great pay - earn up to $100,000 per year!\n, • High Solo rates - experienced drivers now earn up to 55 CPM!\n, • New safety bonus - qualify and take home up to $1,500 or more every month!*\n, • Stay moving: 100% no-touch freight and 60-80% drop and hook!\n, • Dependable trucks: Well-maintained fleet equipped with the latest safety technology\n, • $1,000 driver referral bonuses – unlimited!\n, • Excellent benefits: health, dental & vision + 401(k)\n, • Pet & Rider policies\n, • Paid vacation\n, • No experience necessary! We will give you the training you need! (CDL-A Required)\n\n Have Your CDL-A? Apply Now or Speak with a Seating Specialist Today!\n Interested in being a driver trainer? Drive with Western for 3 months or more, and you can qualify as a driver trainer! Call today for more details on how you can earn up to $130,000 annually!** \n Have you been out of driving for 3 years or more? Are you a recent CDL-A grad? Call us for information about our training programs today! \n Real Miles. Real Money.\n Western Express has immediate openings in our Dry Van division for company drivers and driver trainers! (CDL-A required.) With our steady miles and numerous perks, Western Express continues to drive stability in unstable times. \n Apply Now! Limited Opportunities!\n Requirements:\n\n • Valid CDL-A (Class A CDL)\n, • 21+ years of age\n\n Western Express is a non-discriminatory and equal-opportunity employer. Regardless of background, we'd like to speak with you to see if you qualify.*Safety bonus eligibility conditions apply, including minimum tenure, mileage, accident-free driving and moreTrainer eligibility subject to review and approval. Experience, tenure and safety requirements apply*Subject to change without notice. Additional restrictions may apply. Call for detailsBy submitting my information, I consent to receive calls, text messages, and emails from the company, including information about my application, eligibility, opportunities, and other advertising and telemarketing messages. I agree that calls may be made using an automatic telephone dialing system and/or an artificial or prerecorded voice and that messages and emails may be sent using automatic messaging systems. I understand that I may opt-out at any time by pressing "0" during the calls, by texting "STOP" in response to the text messages, or by clicking the provided “unsubscribe” link in the emails. I additionally agree that Western Express, Inc.'s service provider receives in real-time and logs your text messages and emails with Western Express, Inc.

Looking for a change of scenery and a chance to help others? Join as a traveling Physical Therapist where you will help patients recover from injuries and manage chronic conditions while experiencing life in a new location. Apply now and a recruiter will reach out with more details. \n \n Minimum Requirements \n\n • Bachelor's, Master's, or Doctoral degree in Physical Therapy from an accredited program approved by the APTA.\n, • Active New Jersey Physical Therapist license required to start the assignment.\n, • BLS certification from American Heart Association or American Red Cross may be required.\n, • Experience working in a skilled nursing facility or long-term care setting is required.\n, • Demonstrated ability evaluating and treating adults with post-acute and chronic conditions, including mobility and functional restoration.\n, • Experience with documentation systems commonly used in SNFs and Medicare/Medicaid regulatory requirements.\n, • Ability to work independently and coordinate care with interdisciplinary teams.\n, • Preferred: prior travel PT experience and proficiency with restorative nursing programs.\n\n \n Assignment Details \n\n • Facility type: Skilled Nursing Facility.\n, • Shift: Days.\n, • Shift hours: 08:30–16:30.\n, • Scheduled as 5x8 with a 30-minute meal break.\n, • Guaranteed hours: 36 per week; scheduled 40 hours.\n, • Assignment duration: 13 weeks.\n\n \n Location Highlights \n \n Westfield, NJ offers a suburban lifestyle with accessible regional transit and nearby outdoor recreation. Westfield is 30 miles from Manhattan with NJ Transit rail service providing regular commutes to New York Penn Station and is adjacent to Rahway River Parkway offering riverside trails and parks. The town features a historic downtown with shops and restaurants along North and South Avenue and is within 25 miles of the Jersey Shore beaches and Sandy Hook. Westfield is a suburban community suited to those seeking a walkable downtown, family-friendly neighborhoods, and a mix of cultural events at nearby Union County Performing Arts Center in Rahway. Commuting options include major roadways I-78 and the Garden State Parkway within a 20–40 minute drive, and Newark Liberty International Airport is approximately 20 miles away. \n \n EEO Statement \n All qualified applicants will receive consideration for employment without regard to race, color, religion, sexual orientation, gender, gender identity and expression, national origin, age, disability, or protected veteran status. We celebrate diversity and are committed to creating an inclusive environment.

Job Description At PetVet Care Centers, our mission is to improve the lives of animals and people — providing exceptional and compassionate care at every stage — for all the moments that matter. Because life is better with pets. We deliver the Ultimate Care Experience — every pet, every client, every time. That starts with a Culture of Care that supports our team members as much as the pets and clients we serve. With more than 420 locally led hospitals and over 11,000 team members nationwide, we offer: • Local autonomy with national support, • Career mobility and development opportunities, • A collaborative, inclusive environment where your wellbeing comes first You care for pets. We care for you. Position Overview Join our team as a Hospital Manager who works daily to develop an efficient and effective hospital support team by fostering an environment of trust, teamwork, and accountability. The Hospital Manager partners with the Veterinarian to provide an efficient and profitable operation by driving revenue and managing costs while creating a hospital culture based on high-quality patient care and excellent customer service. Plainfield Animal Hospital is a full-service veterinary hospital in South Plainfield, NJ, providing comprehensive care for dogs, cats, avian, and exotic pets. The hospital offers preventive care, surgery, dentistry, in-house diagnostics, and other advanced services, with a strong focus on compassionate, communicative care and continuing education. Why Join Us: • Broad operational scope and opportunity for growth: A diverse service offering and care for both traditional and exotic pets create an opportunity to lead a dynamic hospital and drive operational excellence and growth., • Strong focus on team development and quality care: The hospital emphasizes continuing education, expanding medical services, and creating a caring and communicative environment—an appealing culture for a manager who enjoys developing teams and improving the client and patient experience. Key Responsibilities • Supervises the staff within all hospital support departments; achieves and maintains all labor goals., • Hires and trains office and technical clinic support staff; responsible for new hire paperwork., • Orients and trains new clinic staff to the hospital and duties., • Reviews work performance of direct reports, constructively delivers feedback, resolves personnel issues, and discussions with the Regional Manager weekly., • Conducts timely performance appraisals., • Documents and reports accidents; files appropriate reports., • Writes policies/procedures relating to all technical aspects of the hospital and presents for approval., • Manages schedules for technical and administrative staff coordinates the DVM., • Monitors Workforce Management for missed punches and management of overtime hours daily., • Administers the daily operations., • Works with the PetVet Care Centers support team to ensure compliance with all administrative responsibilities., • Monitors budgets, purchases equipment and supplies, and oversees the maintenance of the facility., • Responsible for submitting contract veterinarian invoices, submitting all local vendor invoices, ensuring invoice accuracy, and obtaining w9's from local vendors., • Assists in resolving issues with pet owners where appropriate., • Reviews revenue, labor, and employee issues with the PetVet leadership on a weekly conference call; achieve goals set in each area., • Responsible for all local accounting functions; ensure daily financial information is accurate., • Oversees the management of the inventory and ensures proper documentation and systems are in place., • May establish and oversee billing practices; reviews and maintains the accuracy of billing and oversees charge capturing., • May be responsible for contracts or negotiations with insurance providers., • Maintain compliance of current licensure and the display of the same. Maintaining updated licenses for DVMs., • Performs other duties and responsibilities as assigned by the Manager. Qualifications (Required) • Applicants must be 18 years of age or older to be considered for this position., • Bachelor's degree in business, health science or related field strongly preferred., • At a minimum, five years of direct office management experience, including at least two years of supervisory experience is required., • May consider an equivalent combination of education, certification, training, and/or experience., • Ability to provide customer service in a courteous, prompt, and efficient manner., • Computer proficiency in using Microsoft Office products (Word, Outlook, and Excel) and applicable organization-specific software., • Establish and maintain productive and cooperative working relationships., • Active time management and organizational skills to complete work promptly., • Excellent communications skills both orally and in writing., • Must be flexible with scheduling and able to work some weekends and holidays., • Ability to work with or around sick animals, potentially hazardous materials, cleaning chemicals, gas anesthetics, zoonotic diseases, and unpleasant odors., • Depending on the functional area of assignment, tasks may involve extended periods at a keyboard or workstation and/or extended periods standing and/or walking., • May include some climbing, balancing, stooping, kneeling, crouching, or crawling., • Some tasks involve the periodic performance of moderately physically demanding work, usually involving lifting or carrying moderately heavy animals (up to 50 pounds)., • Other duties and responsibilities as assigned by management. Preferred Skills (Nice to Have) • Certified Veterinary Practice Manager (CVPM) or Master of Healthcare Administration (MHA) is preferred., • Analytical skills: strong ability to analyze information quickly and efficiently as it relates to the hospital's finances., • Strategic planning: the ability for financial forecasting, marketing plans, and long-term plans for the growth of the practice., • Leadership: ability to effectively manage and direct hospital staff towards a common goal., • Decision-making skills: possess the ability to make good decisions, solve problems, and decide on essential matters., • Communications: demonstrate the ability to communicate, orally, and in writing, effectively to convey necessary information to hospital staff., • Resourcefulness and adaptability: the ability to take the initiative and get things done as well as the ability to adapt to changes or new information., • Compliance: ability to understand and manage important compliance regulations and requirements of the hospital., • Planning and prioritizing: must be able to organize work efficiently, set priorities, and establish plans and timetables for achieving goals. What We Offer We care deeply about supporting our team members — professionally and personally. Benefits include: • Medical, dental, and vision insurance, • Paid Parental Leave (birth, adoption, foster), • 401(k) with discretionary contribution, • Team Member Pet Discounts, • Emotional wellbeing support — including Calm app access and 24/7 EAP, • CE stipends and career development resources, • Grant Circle — a relief fund for team members facing personal hardship, • Local hospital culture backed by national resources Pay Range $70,000—$85,000 USD At PetVet Care Centers, we're committed to a Culture of Care — for pets, for the people who love them, and for the team members who make it all possible. With more than 400 hospitals across the U.S. and a team of over 11,000 dedicated professionals, including 1700+ veterinarians, we offer a unique blend of local leadership and national support that helps our hospitals thrive. Our model is built on partnership, collaboration, and local medical autonomy, empowering each hospital to deliver high-quality care while benefiting from shared resources and a strong professional community. Whether you're providing care in a hospital or supporting operations behind the scenes, PetVet is a place where you can grow your career, stay connected to your purpose, and make a meaningful impact. You care for pets. We care for you. PetVet is an equal opportunity employer. All employment decisions are made without regard to race, color, age, gender, gender identity or expression, sexual orientation, marital status, pregnancy, religion, citizenship, national origin/ancestry, physical/mental disabilities, military status or any other basis prohibited by law. EOE, M/F/D/V PetVet respects your privacy and is committed to protecting your personal information. Please see our privacy notice for additional information about our data practices.

Job Description 2 on / 2 off Schedule | $500 Sign-On Bonus | Benefits Sanicola Logistics is a family-owned trucking company hauling dedicated Amazon freight. We're hiring safety-focused CDL-A drivers who want steady income, a predictable 2-on/2-off schedule, brand-new equipment, and the support of a family-owned company. • Starting Pay at $25.00 per hour, • $500 Signing Bonus paid out after 90 days of employment, • Flex shifts and overtime opportunities, • 100% No Touch Amazon freight with year-round demand, • W-2 employment, • Medical insurance, • 401(k) with Employer Match Program, • Flexible Paid Time Off (PTO), • Safety, Performance and Referral Bonus incentives, • Predictable scheduling and strong work-life balance Premium Equipment Operate modern, Amazon-branded equipment equipped with the latest technology and driver comforts, including: • Brand-new sleeper tractors with APUs and modern driver amenities, • Automatic transmissions, • Advanced electronic safety and navigation systems, • Company issued Samsung phones and tablets outfitted in cab, • State-of-the-art Amazon transportation technology Driver Responsibilities • Safely operate a Class A tractor-trailer, • Haul dedicated Amazon freight, • Complete scheduled pickups and deliveries, • Perform pre-trip and post-trip inspections, • Maintain DOT compliance and electronic logs, • Communicate professionally with dispatch and operations Minimum Qualifications • Valid Class A Commercial Driver's License (CDL)., • Must be at least 21 years of age., • Legally authorized to work in the United States., • Ability to meet all DOT requirements and utilize ELD/GPS technology., • Clean Motor Vehicle Record (MVR) and favorable DAC report., • Ability to successfully pass a DOT physical, background check, and pre-employment drug screening., • Availability to work nights, weekends, and holidays, particularly during peak seasons. Preferred Qualifications • 1 year of commercial driving experience is preferred., • Amazon Relay experience is a plus but not required., • Experience operating sleeper tractors., • Demonstrated commitment to safety and professionalism. Apply Today Apply today and become part of the Sanicola Logistics team. While you'll be hauling dedicated Amazon loads, you'll be employed directly by Sanicola Logistics, giving you the stability of a major freight network combined with the personal support of a family-owned company. Join Sanicola Logistics and build your career with a growing company offering dedicated freight, predictable schedules, modern equipment, and a leadership team that values professional drivers. Equal Opportunity Employer Sanicola Logistics is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, genetic information, or any other protected status under applicable law.

Job Description Are you a car enthusiast and looking to make some extra money one day a week? This may be the job for you! Schedule: One day per week. THURSDAYS from approximately 8:00 AM to 1:00 PM. Pay Range: $16.50-$17 hourly Description: Sale Day Drivers help move the cars through the auction lanes while the car auction is going on! Sale day driving and safety: • Drive vehicles across the block following all safety guidelines including but not limited to wearing a seatbelt, placing vehicle in park or neutral when coming to a stop and following the ADESA wedge., • Safely move, stage, and park vehicles in the correct lot area., • Advise supervisor or lane captain of all breakdowns and maintenance needs immediately, • Drivers will be trained and must know, practice and ensure that company safety policies and procedures are followed at-all-times., • Always operate motor vehicles safely and practice conservative, cautious, and courteous driving habits, • Immediately report to manager or supervisor anything that occurs which may potentially jeopardize the ability to physically or legally operate a motor vehicle., • Immediately report to manager or supervisor all driving related incidents to include traffic citations, warnings, accidents or mechanical problems experienced on either private or public property whether on or off the job Qualifications • Must be at least eighteen (18) years of age., • Must be qualified to operate a motor vehicle and possess a valid driver's license., • Basic computer skills are required., • Ability to work outdoors under any type of weather conditions. Other Requirements To be able to do your job at ADESA, there are some basic requirements we want to share with you. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. • The physical activity requirements of the position range from Light to Medium Physical Work, • Frequent – standing, watching, touching, listening, walking, talking, • Potential – running, jumping, yelling or other rapid or forceful movement in emergency situations, • Visual acuity requirements include color, depth perception and field of vision comparable to definitions for Clerical, Administrative, Machine Operators (including inspection) positions. Physical Working Conditions This position is subject to both inside and outside environmental working conditions, including temperature changes, outside weather conditions, slightly elevated ambient noise levels, and minor atmospheric conditions affecting skin or respiratory systems, such as fumes, odors and dusts associated with internal and external service station/convenience food and petroleum dispensing operations. • Note: Refer to the Handbook and Policy Manuals for important addendum requirements to all job descriptions. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. To be able to do your job at ADESA, you must be able to read, write, speak, and understand English. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. About Us ADESA, a Carvana-owned company, is currently operating over 50 locations throughout the US. Our Auto Auctions, some up to 200 acres, provide a wide array of vehicle services including repair & reconditioning, auction remarketing, and many of our sites serve as market hub distribution centers. Our inventory comprises hundreds of thousands of vehicles across North America from retail to commercial, OEM & more. We work in a service industry and embrace a "we" versus "I" culture – help others, and they will help you. Our industry is fun, fast-paced, and competitive – and filled with the best people who are passionate about what they do. We're excited about the future! As an industry leader, ADESA is poised for a multi-year expansion including huge investments in facilities, massive sales growth, and an ever-increasing inventory of vehicles! We are looking for great people who want to take this journey with us! Get a sneak peek into life at ADESA! Legal Stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. ADESA is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. ADESA also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description $25/Hr. | 2 on / 2 off Schedule |$500 Sign-On Bonus | Benefits Sanicola Logistics is a family-owned trucking company hauling dedicated Amazon freight. We're hiring safety-focused CDL-A drivers who want steady income, a predictable 2-on/2-off schedule, brand-new equipment, and the support of a family-owned company. • Starting Pay at $25.00 per hour, • $500 Signing Bonus paid out after 90 days of employment, • Flex shifts and overtime opportunities, • 100% No Touch Amazon freight with year-round demand, • W-2 employment, • Medical insurance, • 401(k) with Employer Match Program, • Flexible Paid Time Off (PTO), • Safety, Performance and Referral Bonus incentives, • Predictable scheduling and strong work-life balance Premium Equipment Operate modern, Amazon-branded equipment equipped with the latest technology and driver comforts, including: • Brand-new sleeper tractors with APUs and modern driver amenities, • Automatic transmissions, • Advanced electronic safety and navigation systems, • Company issued Samsung phones and tablets outfitted in cab, • State-of-the-art Amazon transportation technology Driver Responsibilities • Safely operate a Class A tractor-trailer, • Haul dedicated Amazon freight, • Complete scheduled pickups and deliveries, • Perform pre-trip and post-trip inspections, • Maintain DOT compliance and electronic logs, • Communicate professionally with dispatch and operations Minimum Qualifications • Valid Class A Commercial Driver's License (CDL)., • Must be at least 21 years of age., • Legally authorized to work in the United States., • Ability to meet all DOT requirements and utilize ELD/GPS technology., • Clean Motor Vehicle Record (MVR) and favorable DAC report., • Ability to successfully pass a DOT physical, background check, and pre-employment drug screening., • Availability to work nights, weekends, and holidays, particularly during peak seasons. Preferred Qualifications • 1 year of commercial driving experience is preferred., • Amazon Relay experience is a plus but not required., • Experience operating sleeper tractors., • Demonstrated commitment to safety and professionalism. Apply Today Apply today and become part of the Sanicola Logistics team. While you'll be hauling dedicated Amazon loads, you'll be employed directly by Sanicola Logistics, giving you the stability of a major freight network combined with the personal support of a family-owned company. Join Sanicola Logistics and build your career with a growing company offering dedicated freight, predictable schedules, modern equipment, and a leadership team that values professional drivers. Equal Opportunity Employer Sanicola Logistics is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, genetic information, or any other protected status under applicable law.

Job DescriptionBenefits/Perks • Competitive Compensation, • Career Advancement OpportunitiesJob Summary: We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in residences or commercial establishments. You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: • Repair or service PTAC heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants, • Establish customer rapport to ensure the highest levels of satisfaction, • Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution, • Test electrical circuits or components for continuity, using electrical test equipment, • Repair or replace defective equipment, components, or wiringQualifications:, • Past experience as an HVAC service technician or comparable education, • Valid Drivers License, • EPA Certification, • Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems, • Ability to climb ladders, crawl, and lift 40 poundsBilingual a plus+

Job Description HVAC Maintenance Technician Are you a skilled HVAC Maintenance Technician looking to join a company with a strong legacy and commitment to employee growth? Join a trusted plumbing, electrical, heating, and air conditioning company with over 55 years of experience serving the community. We're currently seeking a dedicated HVAC Maintenance Technician to diagnose and maintain residential HVAC systems while providing exceptional customer service. What We Offer: Earn competitive wages ranging upward to $35/hr Benefits Include major medical, prescription drug, optical, dental, orthodontia, long-term disability, and life insurance. 401-K with Match with company match. Access 100+ hours of training every year. Participate in events like ball games, comedy clubs, dinners, awards, and more every quarter. Company-provided uniforms. Provide Stability - We have over 55 years in business. Work with a fun, professional, and caring management team. As we expand, so do the opportunities for career advancement. Take pride in working for a company that makes a positive difference in the community. Responsibilities of the HVAC Maintenance Technician: • Perform regular maintenance and inspections of HVAC systems, including checking for wear and tear, cleaning, and testing equipment functionality., • Replace or clean filters, lubricate parts, and clean air ducts as needed., • Diagnose and troubleshoot minor issues and perform necessary repairs to keep systems running efficiently., • Ensure that HVAC systems are compliant with local safety codes and regulations., • Record and document all service and maintenance activities, including any parts used and recommendations for future service., • Respond to maintenance calls and provide efficient solutions to any HVAC-related issues., • Advise customers on energy-saving tips and system performance improvements., • Maintain a clean and safe work environment, ensuring all tools and equipment are properly stored and maintained., • Communicate effectively with clients, management, and other team members. Requirements for the HVAC Maintenance Technician: • High school diploma or equivalent (HVAC certification or training is a plus)., • Proven experience as an HVAC Maintenance Technician or in a similar role., • Strong knowledge of HVAC systems, components, and maintenance procedures., • Ability to troubleshoot and repair HVAC equipment., • Familiarity with HVAC codes and regulations., • Excellent communication and customer service skills., • Ability to lift heavy equipment and work in various environments., • Valid driver's license and reliable transportation., • Strong problem-solving skills and attention to detail., • Ability to work independently and as part of a team. If you're passionate about being part of a dynamic team that's shaping the future of HVAC services, then we want to hear from you! Don't miss this opportunity to join an industry-leading legacy. Apply now and let's take your HVAC career to new heights together! We are an Equal Opportunity Employer and do not discriminate based on race, color, religion, sex, national origin, age, disability, genetic information, veteran status, or any other characteristic protected by law. We encourage applications from all qualified individuals.

Job Description Overview Pay: $23 - $45 per hour Earning potential: Over $100k / year based on performance Schedule: No on-Call Full-time, year-round work About AJ Perri: AJ Perri, part of the ARS family of brands, is a trusted leader in residential HVAC and plumbing services. We serve customers in the state of New Jersey with reliable, professional service. With over 50 years of local experience, we’re known for quality workmanship, prompt service, and customer satisfaction, backed by ARS’s national network. What We Offer Insurance available after 31 days Low-cost medical (as low as $5/week) Dental, vision, HSA/FSA 401(k) with company match 10 days PTO + 5 earned Sick Dys (per NJ Law) +8 paid holidays Company-paid life insurance Take-home service vehicle + gas card Uniforms + cleaning service Weekly direct deposit Responsibilities As a Residential HVAC Service Technician, you will: Troubleshoot and diagnose residential HVAC systems, including furnaces, heat pumps, and air conditioning units Perform HVAC repairs, service calls, and preventative maintenance Identify system issues and recommend appropriate heating and air conditioning solutions Ensure all HVAC service work meets company standards and local code requirements Communicate clearly with homeowners about system performance and recommended repairs Deliver professional customer service while completing HVAC service and repair work This position offers consistent work, strong earning potential, and the opportunity to grow your career in the residential HVAC industry. Qualifications What You Need 3 years of residential HVAC experience EPA certification (or ability to obtain) Valid driver’s license with clean driving record Ability to work in attics, crawlspaces, and lift heavy HVAC equipment If you have the experience we seek, APPLY NOW or for questions about the role, you may contact our recruiting team at 772-268-2651 This posting provides details on potential compensation ranges and possibilities. These amounts are not guaranteed and should in no way be construed as an offer. Sign-On Bonuses only available for roles that have them advertised; amounts are depending on experience and will be paid out according to an offer letter addendum. American Residential Services is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics. For more information about how we collect and use personal information, see our privacy policy here: https://www.ars.com/privacy-policy.

Job DescriptionBenefits: • Competitive salary, • Free uniforms, • Paid time off We are looking for a skilled and experienced technician to join our team! HVAC/R Technicians install, maintain, repair and overhaul various types of equipment, including refrigeration systems, heating and cooling systems, and commercial kitchen equipment. A team player who is comfortable working independently, loves the feeling of a job well done, and takes pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: • Perform preventative maintenance, corrective maintenance and installation of refrigeration, heating, air conditioning, and ventilation and plumbing applications., • Install, maintain, and repair package units, split systems, boilers and other mechanical equipment., • Install, repair, and maintain light commercial rooftop units, boilers, controls, and other mechanical equipment., • Maintain all ventilation systems including preventative maintenance tasks and rebuilding of equipment when need., • Perform repairs and installation on HVAC/R equipment and commercial kitchen equipment for residential and commercial customers., • Perform maintenance and repair of HVAC/R equipment for commercial and residential applications including commercial refrigeration equipment., • Demonstrate strong knowledge of refrigeration systems, walk in refrigeration/freezer units and some experience on centrifugal and rotary screw compressor chillers., • Validate laboratory air flows to meet OSHA safety requirements., • Conduct a wide range of repairs in accord with OSHA regulations., • Plumb and connect all necessary PVC piping to drain condensation from the evaporative coil., • solder, pipe-fitting, blue print reading, climbing ladders, digging ditches, preparing pipes and fittings, cleaning, • Work on motor controls, pneumatic controls, chillers, high pressure steam, pumps, valves, piping, etc., • Service residential and commercial plumbing equipment., • Perform minor electrical and plumbing repairs., • Replace and repair malfunctioned/defective HVAC equipment, troubleshoot electrical components and wiring. Qualifications: • Past experience as an HVAC service technician, • Refrigeration experience, • Valid Drivers License, • EPA Certification, • Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems, • Ability to climb ladders, crawl, and lift 40 pounds, • Ability to work after hours, over weekends and on public holidays with short or no notice, • Ability to work in confined spaces, • Excellent written, verbal and interpersonal skills, • Reliable mode of transportation

Job Description Are you a Certified HVAC/Refrigeration Technician looking for a place to build your career - not just another job? We are looking a Journey Level Refrigeration Technician for full-time, year-round commercial service work in and around the Edison, NJ area. Looking for the right job is tough. Come join us, and you won't need to look again! We are seeking career-minded techs who are ready to start their last job and enjoy the work/life balance we offer for years to come! With full benefits, paid holiday/sick/vacation time, room for growth, and team that has your back, this is the place for you! Apply now! RESPONSIBILITIES: · Maintain, diagnose, and repair multiple types of refrigeration systems, as well as all mechanical and electrical components related to the equipment (such as self-contained coolers and freezers, single and rack systems, etc.) · Perform minor plumbing repairs on refrigeration equipment, including walk-in drain lines, case drain lines, cooling towers and water-cooled condensers · Inspect plumbing, electrical, and refrigeration systems and identifying specifications that are required · Perform preventative maintenance and repairs for HVAC and Refrigeration · Collaborate directly with grocery store managers and store directors · Quote equipment repairs and recommend replacement when necessary · Maintain proper van stock, tools and safety equipment on work van SKILLS: · Good judgement for use of supplies and materials in refrigeration repairs · Attention to detail and critical analysis for diagnostics and work performed · Professional communication skills · Mechanical aptitude QUALIFICATIONS: · 2+ years prior HVAC/R experience · Be available for ON CALL work as needed · Ability to pass a physical/drug screen/background investigation/ driving abstract as needed BONUS POINTS: · Universal EPA License • Electrical License · 2-3 years of grocery refrigeration / HVAC experience · Related education/certification in HVAC and refrigeration industry It's time you take the first step into your last job! If you're done wasting time in the wrong place, apply now!

Job DescriptionBenefits: • Dental insurance, • Health insurance, • Vision insurance Title: Refrigeration Technician (Blue Seal Toxic) Location: Linden NJ (on-site) Must have: Blue seal Refrigeration Toxic License/Seal & Black Seal Steam License/Seal Job Description ● Maintains the following equipment: Ammonia refrigeration system, Freon packaged refrigeration units and building heating and air conditioning equipment, high pressure steam boiler systems, hot water generator, compressed air systems, electrical distribution equipment, building sprinkler systems, and any other supporting equipment as directed by management. ●Performs duties as assigned by the Facility Manager and/or Gold Seal ●Ensures continuous operation of all the facility utility systems and peripheral equipment to support the requirements of the production schedule and facility conditions. This requires proper coordination of all operations and maintenance utilities equipment. ●Coordinates both internal and external resources for maintenance of the facility. ●Assists in the record-keeping and training requirements for all components of the Process Safety Management/Risk (PSM/RMP management plans to achieve compliance with state and federal guidelines. ●Performs preventative maintenance on equipment to maintain in good working condition. ● Utilizes drawings, technical records, and vendor diagrams to complete Preventative Maintenance documents (PM’s) related to machine overhauls and repairs. ● Performs other duties as assigned. WHAT'S ON THE MENU ● Provides technical analysis and services to provide real-time data on the status of refrigeration and operational equipment. ● Takes a leadership role on the emergency response team in the event of release of hazardous chemicals. ● Assures the ammonia compressors are operating safely and efficiently to reduce energy consumption. NECESSARY INGREDIENTS ● High school diploma or GED required. ● Knowledge of equipment set-up, functions, operating procedures, and preventative maintenance techniques. ● Basic knowledge in programmable logic controllers (PLCs) preferred. ● Demonstrated knowledge and application of best practices in maintenance and safety management. ● Knowledge of state and federal regulatory requirements as related to plant and utilities systems’ operations, safety, and environmental agencies. ● Knowledge of best available energy management practices and procedures. ● Ability to read and interpret work orders, operating manuals, and maintenance instructions in English. Ability to complete forms detailing maintenance work performed. ● Requires state of New Jersey licenses for operation of hazardous refrigeration and high-pressure steam systems (Blue & Black Seals). Requires valid driver’s license

Job Description Overview AJANTA CONSULTING, LLC Edison, NJ The HVAC Mechanic performs repair and maintenance on a variety of equipment, systems and structures; including lab equipment, etc. Reports directly to the Foreman and may be assigned to support various trades’ responsibilities as required. Responsibilities • Responsible for performing various maintenance services under the direction of the Foreman., • Operates, maintains and repairs one or more systems that provide an establishment with such services as heat, air-conditioning (cool, humidify, dehumidify, filter, and circulate air), refrigeration, steam or high-temperature water or electricity., • Observes and interprets reading on gauges, meters and charts which register various aspects of the system’s operation, adjusting controls to insure safe and efficient operation of the system and to meet demands for the service provided, recording in logs various aspects of the system’s operation, keeping the engines, machinery and equipment of the system in good working order., • Workers are required to be skilled in the repair of electronic control equipment; workers in establishments producing electricity, steam, or heated or cooled air primarily for sale, and Boiler Tenders, • Installs services and repairs environmental-control systems in office buildings, and other commercial establishments, utilizing knowledge of refrigeration theory, pipefitting and structural layout, mounts compressor and condenser units on platform or floor, using hand tools, following blue prints or engineering specifications, fabricates, assembles and installs ductwork and chassis parts, using portable metalworking tools and welding equipment, and install evaporator unit in chassis or in air-duct system, using hand tools., • Cuts and bends tubing to correct length and shape, using cutting and bending equipment and tools, cuts and threads pipe, using machine-threading or hand threading equipment, joins tubing or pipes to various refrigerating units by means of sleeves, couplings or unions and solders joints, using torch, forming complete circuit for refrigerant, installs expansion and discharge valves in circuit., • Connects motors, compressors, temperature controls, humidity controls, and circulating ventilation fans to control panels and connects control panels to power source, • Installs air and water filters in completed installation, injects small amount of refrigerant into compressor to test systems and adds Freon gas to build up prescribed operating pressure, • Observes pressure and vacuum gauges and adjusts controls to insure proper operation, tests joints and connections for gas leaks, using gauges or soap-and-water solution, wraps pipes in insulation batting and secures them in place with cement or wire bands., • Replaces defective breakers controls, thermostats, switches, fuses and electrical wiring to repair installed units, may install, repair and service air conditioners, ranging from fifteen to twenty tons cooling capacity in warehouses and small factory buildings., • Responsible for performing various maintenance services under the direction of the Foreman., • Diagnoses and repairs various mechanical and plumbing equipment., • Performs repairs to plumbing systems., • Repairs and maintains pumps, air compressors, and miscellaneous mechanical items., • Repairs lab and lab support equipment., • Other duties as assigned Qualifications • High school diploma., • New Jersey Black Seal License, • HVAC CFC Certification, • Minimum four (4) years of experience at the journeyman Knowledge, Skills and Abilities • Ability to obtain a HVAC-R Certification, • Ability to lift and/or move up to 50 pounds. Physical Demands: (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) • While performing the duties of this Job, the employee is regularly required to sit and talk or hear. The employee may use repeated motions that include the arms, wrists, hands and/or fingers. The employee is occasionally required to walk, stand, climb, balance, stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision.

Job Description Job Title: Commercial HVAC Service Technician Job Location: Edison NJ Operating Company: Energy Transfer Solutions Pay Transparency: $35 to $55 Hourly FLSA Status: Non-Exempt Sign on bonus offered About: Under the guidance of the Service General Manager, the Commercial HVAC Service Technician plays a key role in delivering top-tier service to our customers by expertly installing, servicing, and starting up a wide range of HVAC systems. From first-time installations to diagnosing and repairing complex issues, you’ll be the go-to problem solver our customers count on. Energy Transfer Solutions - A member of the AIR Control Concepts family. Overview: Energy Transfer Solutions is your trusted partner for innovative HVAC solutions. Since 2003, we’ve provided premier equipment, parts, controls, and services to commercial and industrial clients across PA, NJ, and DE. Our expert team delivers tailored solutions, from system design to turnkey installations, ensuring optimal performance and efficiency. With a focus on quality, integrity, and customer success, ETS is committed to enhancing your building's comfort, reliability, and value. Check out our website: Specialty HVAC Solutions, Parts & Services | ETS HVAC Essential Duties and Responsibilities: • Service, Troubleshooting & Optimization – Diagnose and resolve issues on a variety of commercial HVAC systems. Perform preventative maintenance and fine-tune system performance for energy efficiency and reliability., • Customer Relationship Management – Build and maintain strong client relationships by addressing service concerns, recommending improvements, and delivering high-quality communication and support., • Communication & Documentation – Coordinate with internal teams to ensure efficient scheduling and follow-up. Accurately complete service reports, work orders, and related documentation in a timely manner., • Training & Mentorship – Stay up to date through ongoing technical training. Serve as a resource and occasional mentor to junior technicians in the field., • Safety & Compliance – Follow all safety guidelines and regulatory requirements as outlined by OSHA, the company, and customer sites., • Emergency Response – Participate in the on-call rotation to provide after-hours support for urgent service needs., • Other Duties as Assigned – Contribute to the team and company by stepping in where neededExperience & Requirements:, • Minimum 3–5 years of commercial HVAC service experience with systems such as VRF, rooftop units, and packaged equipment., • OEM-specific training or certifications preferred., • Skilled in diagnostics, troubleshooting, and interpreting service manuals and schematics., • Strong communication and customer service skills with a professional, team-focused mindset., • Valid driver’s license with clean driving record;, • Physically capable of lifting heavy equipment, climbing ladders, and working in various field conditions, including rooftops and tight spaces., • Willingness to participate in an on-call rotation for emergency service coverage. Benefits: We offer a competitive and comprehensive benefits package, including: • Health & Wellness – Medical, dental, vision, and life insurance coverage to support your well-being., • Financial Security – 401(k) retirement plan with company match and short/long-term disability coverage., • Work-Life Balance – Paid time off (PTO), paid holidays, and an employee assistance program (EAP)., • Professional Development – Ongoing training opportunities and support for continuing education., • Company Perks – Uniforms, vehicle and phone (as applicable), and a supportive team environment that values your expertise. The Company provides equal employment opportunity in accordance with applicable laws and prohibits discrimination and harassment. Employment decisions are based on business needs and qualifications. The Company complies with disability laws and provides reasonable accommodations to qualified individuals. Powered by JazzHR scvfbdiHrL

Job Description Overview Pay: $22 – $40+ per hour Sign on Bonus - up to $7500.00* *Based on experience and license Earning potential: Over $100K per year based on performance Full-time, year-round work for residential HVAC Service Technicians in the Mercer County area. Join Air Experts, a member of American Residential Services (ARS) the nation’s largest provider of residential HVAC, heating & air conditioning. For over 40 years home owners throughout New Jersey have been trusting Air Experts for their home comfort solutions. We are hiring skilled HVAC Service Technicians to diagnose, troubleshoot, service, and repair residential heating and air conditioning systems. This role supports homeowners by providing reliable HVAC repair, maintenance, and system diagnostics. What We Offer Insurance available after 31 days Low-cost medical (as low as $5/week) Dental, vision, HSA/FSA 401(k) with company match 15 days PTO + 8 paid holidays Company-paid life insurance Take-home service vehicle + gas card Uniforms + cleaning service Weekly direct deposit Responsibilities As a Residential HVAC Service Technician, you will: Troubleshoot and diagnose residential HVAC systems, including furnaces, heat pumps, and air conditioning units Perform HVAC repairs, service calls, and preventative maintenance Identify system issues and recommend appropriate heating and air conditioning solutions Ensure all HVAC service work meets company standards and local code requirements Communicate clearly with homeowners about system performance and recommended repairs Deliver professional customer service while completing HVAC service and repair work This position offers consistent work, strong earning potential, and the opportunity to grow your career in the residential HVAC industry. Qualifications What You Need 3 years of residential HVAC experience EPA certification Ability to work in attics, crawlspaces, and lift heavy HVAC equipment For questions about the role, you may contact our recruiting team at CKANE@ARS.COM This posting provides details on potential compensation ranges and possibilities. These amounts are not guaranteed and should in no way be construed as an offer. Sign-On Bonuses only available for roles that have them advertised; amounts are depending on experience and will be paid out according to an offer letter addendum. American Residential Services is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics. For more information about how we collect and use personal information, see our privacy policy here: https://www.ars.com/privacy-policy.

Job Description Residential HVAC Service Technician - Piscataway, NJ Are you looking for a career with a family-oriented company that values your growth? A growing team in the Princeton area is looking for Residential HVAC service technicians with 5+ years of experience in Residential Service. This is an ideal opportunity for a Residential HVAC service technician to join a team that is dedicated to enriching the lives of their team, their customers, and the communities they serve! What We Can Do For You: Pay Range: $28.00 - $44.00 Customizable medical benefits including company-paid Life Insurance and Long-Term Disability Company contribution to 401(k) and HSAs Company-paid Employee Assistance Program and Mental Health Program Company-sponsored activities throughout the year Company-provided iPad + iPhone and ongoing technical updates and upgrades PTO Program Company vehicle and gas card Generous OT policy and the opportunity to earn additional spiffs Yearly Tool Allowance Company-provided uniforms and power tools Responsibilities: Be an outgoing, friendly, and knowledgeable Service Technician who builds relationships with customers and solves their HVAC problems, whether it is maintenance risks or diagnosing electrical and mechanical faults. Work on a wide range of Commercial equipment, giving you the chance to diagnose, troubleshoot, repair, and maintain systems including air conditioning systems, fan coils, air handling units, chillers, boilers, pumps, cooling towers, Makeup Air Units, ERVs, WSHPs, HVAC Control Systems, Refrigeration Equipment, and exhaust systems. Provide business owners or maintenance managers with honest, fact-based opinions to help them make informed decisions. Proactively identify and fix small problems before they turn into bigger, more expensive repairs. Work under minimum supervision while also being part of a supportive team. Prioritize safety, observe all safety regulations, and be familiar with OSHA and EPA requirements. Provide guidance and share your expertise with those new to the trade. Maintain mindfulness and clear communication. Take pride in completing all jobs and paperwork neatly, accurately, thoroughly, and on time. Qualifications: 5+ years of Residential HVAC service experience REQUIRED An associate degree (A.A.) from a two-year college or technical school is beneficial but not required. Strong drive to do the job right the first time and pride in your work. Commitment to lifelong learning and growth in the trade. Valid and current driver's license with an insurable driving record. CFC Certification - Type I and II, Universal is required. Proficiency with technology, including working from an iPad and professional email communication. We are an Equal Opportunity Employer which offers competitive compensation, excellent benefits, and company vehicles, paid training, advancement opportunities within your field and our company, and a respected leader in the home services industry.

Job DescriptionWe are looking for an HVAC Technician to join our team! You will install, service, and repair heating and air conditioning systems (year-round work). Responsibilities: • Diagnose, service, and repair heating, ventilation, and air conditioning systems, • Install new or replace HVAC equipment, • Perform routine preventative maintenance, • Respond to emergency service requests, • Perform seasonal start upsQualifications:, • • 2+ years of experience in the commercial HVAC industry, • • Familiarity with HVAC wiring diagrams, • • Ability to handle physical workload - lifting 50+lbs, • • Strong problem solving and critical thinking skills, • • Clean and valid driver's license Medical, Dental, Vision, Company Truck w/ Gas Card, Phone Allowance, Tablet, Life Insurance, Paid Holidays/Vacation/Sick Job Type: Full-time Pay: $65,000.00 - $125,000.00 per year Benefits: • Company truck, • Dental insurance, • Fuel card, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Schedule: 8-10 hour shift Experience: HVAC: 2 years (Required) Ability to Commute: New York, NY (Required) Powered by JazzHR QwCC2lUPfK

Job Description Job Description Job Title: Controls Technician/ Electrician Company Information Our company was established in 1984 as an HVAC service company. We have grown into one of the largest mechanical contractors in NJ servicing large commercial and industrial buildings consisting of chiller plants, built-up penthouses and large HVAC equipment. We believe all customer interactions should be executed with the highest level of professionalism, excellence and competency at all levels of the organization. Minimum Requirements Experienced controls technician with a minimum of 5 years experience with a strong background in installation, commissioning, troubleshooting, repairing and maintaining building automation control systems and devices. Applicant must be able to follow wiring diagrams and engineering specifications to install and troubleshoot. Responsibilities: • Low voltage wiring, installation, termination of building automation controllers and end-devices., • Testing, commissioning and calibration of sensors, valves, dampers, etc., • Troubleshooting and programming of VFD’s., • Programming of application specific controls such as VAV boxes and fan coils., • Installation of MSTP and IP networks., • Be part of the on-call rotation, • Provide onsite installation and repair of controls systems Experience preferred in the following: • Tridium Jace, • Johnson FX, • BACnet IP, MSTP networks, • RTU, Chiller Plants, Boilers VAV boxes sequence of operations, • Microsoft Visio Required skills and strengths: • Valid drivers license, • HVAC building automation knowledge, • Must be able to perform the physical requirement of the job, • Basic computer skills of Excel, Word, and Outlook., • Five years experience with the installation and troubleshooting of building automations systems, • Communication skills (oral and writing), • Able to read wiring diagrams and engineers drawings, • Able to work in a fast-paced environment, • Able to multi-task and focus amid distractions, • Good listener and a team player, • Detail oriented, • Organized, flexible and follow directions, • Able to work overtime when needed, • Work independently Job Type: Full-time

Job Description Service Technician – Direct Residential Thermal Diagnostics, Technical System Maintenance, and Customer Care Job Overview • Company: Uncle Mike's Home Service LLC., • Salary/Pay Rate: $25.00 to $35.00 per hour (Plus Performance Bonuses and Incentive Pay)., • Location: Lincroft, NJ., • Job/Employment Type: Full-Time., • Schedule: Monday to Friday (With weekend availability as needed)., • Mandatory Licences & Certifications: Valid Driver's License and EPA 608 Certification. The Opportunity You will serve as a premier residential specialist, executing critical thermal diagnostics and equipment maintenance across a high-density consumer market. This role provides the operational autonomy to manage your daily dispatch schedule while serving as the authoritative technical consultant for local homeowners. You will directly drive regional client retention and brand trust, backed by a stable firm that combines small-business heart with enterprise benefits. How You Will Make An Impact • Perform advanced physical diagnostics, mechanical repairs, and custom preventative maintenance on residential HVAC units., • Communicate technical malfunctions and structural repair paths clearly to property owners to build absolute trust., • Conduct microscopic component assessments and capture exact airflow, refrigeration, and electrical performance readings., • Execute seasonal technical tune-ups and complex diagnostic service evaluations across diverse heating and cooling configurations., • Catalog comprehensive field service findings, technical recommendations, and part requirements within the corporate database., • Manage, inventory, and secure company-issued testing instrumentation, trade tools, and your assigned service vehicle., • Enforce rigorous environmental safety protocols, handling chemical refrigerants strictly according to regulatory frameworks. Required Qualifications & Experience • Minimum of 3 years of verified field experience specializing in residential HVAC service and mechanical systems., • Active, non-expired EPA 608 Certification necessary to handle and recover regulated consumer refrigerants., • Valid driver’s license maintained in good standing to accommodate responsive residential territory travel., • Proven troubleshooting capabilities with the capacity to isolate intricate electrical and mechanical system failures independently., • Advanced personal communication skills and a meticulous, clean demeanor while operating inside client residences. Preferred Qualifications & Experience • Completed technical degree in HVAC-R technology, mechanical engineering, or a recognized vocational apprenticeship., • Hands-on familiarity with modern high-efficiency heat pumps, ductless mini-split arrays, and smart control interfaces., • Completed safety milestones including an active OSHA 10 card or specialized residential gas safety credentials. Compensation & Benefits • Competitive hourly compensation ranging from $25.00 to $35.00 scaled to residential mechanical troubleshooting mastery., • Robust financial incentives including immediate access to performance bonuses, incentive pay, and corporate referral rewards., • Stable financial infrastructure featuring a dependable weekly pay cycle and a comprehensive retirement savings program., • Elite health protection architecture including premium medical, dental, vision insurance, and a Health Savings Account., • Full group safety allocations covering flexible life insurance policies, disability protection options, and wellness programs., • Substantial paid leave benefits encompassing traditional vacation allotments, observed holidays, sick leave, and parental leave., • Provided corporate service vehicle, commercial gas privileges, complete field uniforms, and required protective safety equipment., • Fully funded technical professional development, ongoing product certifications, and interactive employee reward contests. About Us Uncle Mike's Home Service LLC is a premier residential mechanical contractor specializing in high-performance heating, ventilation, and air conditioning solutions. We maintain a family-oriented workplace culture built upon technical craftsmanship, clear communications, and uncompromised client care. Our leadership treats workforce satisfaction as a central pillar, providing our technicians with modern diagnostic tools, steady year-round hours, and an engaging environment. Uncle Mike's Home Service LLC is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors.

Job Description About Us Executive Roofing Systems is a family-owned commercial roofing contractor serving building owners, property managers, facility managers, and general contractors. Our team operates as trusted advisors by delivering responsive communication, high-quality workmanship, and reliable roofing solutions that protect our clients' assets. We are growing and looking for a motivated Service Technician to join our commercial roofing service department. This is a great opportunity for someone who wants steady, year-round work and a long-term career in the roofing and construction industry, not just a seasonal job. Position Overview The Service Technician will work alongside a Service Foreman in a company service truck completing daily work orders. Work orders typically include leak detection, roof repairs, preventative maintenance, and roof inspections for commercial buildings. This role supports the foreman in completing service work safely, efficiently, and with high quality standards while learning the technical skills required to advance in the roofing industry. Career Growth Opportunity: This role is a training path to becoming a Service Foreman and operating your own service truck — with the pay increase that comes with it. We invest in our people through on-the-job training, manufacturer certifications, and real opportunities for advancement within the company. Why You'll Love Working Here • Work all year round - commercial service work means consistent hours, not seasonal layoffs, • Performance bonuses on top of your hourly pay, • Referral bonus - get paid for bringing great people onto the team, • Paid training and manufacturer certifications, at no cost to you, • A clear path to promotion - Service Technician to Service Foreman to running your own truck, • Family-owned company culture where you're known by name, not a number, • Full benefits package, • Supportive crew environment focused on your growth and development Responsibilities • Assist the Service Foreman with daily service work orders including leak detection, roof repairs, maintenance, and inspections, • Report to the shop each morning to be dispatched to scheduled service calls, • Support the foreman with carrying materials, tools, and equipment to the roof and work areas, • Assist in completing roof repairs and maintenance tasks as part of the service crew, • Maintain cleanliness and organization of the service truck, tools, and equipment, • Follow company safety procedures and jobsite safety requirements, • Assist with jobsite setup, cleanup, and proper handling of materials and debris, • Support documentation and communication with the office as needed for completed work orders Requirements • Experience in construction, roofing, or a trade-related field preferred but not required, • Comfortable working at heights and climbing ladders, • Physically able to lift materials, bend, climb, and work in outdoor weather conditions, • Strong work ethics and willingness to learn, • Reliable, punctual, and team-oriented, • Ability to follow direction while also taking initiative to get work done, • Valid Driver's License, • Ability to pass a drug and background check What We Offer • Competitive pay: $25–$30/hour based on experience, plus bonus opportunities, • Full benefits, • Paid training and career advancement opportunities, • Stable, year-round work with a growing commercial roofing company, • Supportive team environment focused on growth and development THE KIND OF PERSON THAT THRIVES HERE At Executive Roofing, how you work matters just as much as what you know. All In, All the Way: You are committed, take ownership, follow through, and can be counted on to finish what you start. Stay Three Steps Ahead: You think beyond the estimate and anticipate scope gaps, project risks, logistics, and potential problems before they affect the job. Find a Way Forward: You take initiative, solve problems, and figure things out when the answer is not immediately obvious. Make People Say Wow: You care about the experience you create for customers, coworkers, and partners and take pride in delivering work that represents Executive Roofing well. Be a Good Human: You are humble, kind, and respect others. We do the right thing and strive to be someone people can trust. If you're reliable, motivated, and ready to build a real career in commercial roofing, not just take a job, we'd love to hear from you. Apply today to join the Executive Roofing Systems team! Work Location: On the road Equal Employment Opportunity Executive Roofing Systems is committed to providing equal employment opportunities to all applicants and employees. We maintain a workplace built on respect, fairness, and opportunity and do not discriminate on the basis of any characteristic protected by applicable federal, state, or local law. We believe a diverse team strengthens our company and are committed to fostering an inclusive, respectful, and collaborative workplace.

Job Description Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customer’s products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along the distribution process. Hours/Shift: • 1st Shift from 6:00am – 2:30pm, • 2nd Shift from 2:30pm – 11:00pm HOW YOU WILL CONTRIBUTE (Overview & Key Responsibilities): As an Industrial Refrigeration Mechanic, you will be responsible for conducting maintenance, setup, troubleshooting, repairs, preventive maintenance, and operation of industrial freezers/refrigerators and related production equipment used in a manufacturing environment. • Provides emergency/unscheduled repairs of industrial freezers/refrigerators and related production equipment during production and performs scheduled maintenance repairs during machine service., • Monitor industrial freezer/refrigerators performance and identify potential issues before equipment failures occur., • Prepares industrial freezers/refrigerators, machinery, and related production equipment for scheduled production runs., • Diagnose malfunctions and perform necessary repairs or replace defective parts., • Performs mechanic skills including, but not limited to, mechanical, electrical, pneumatic and hydraulic troubleshooting and repair of packaging and production machines., • Reads and interprets equipment manuals and work orders to perform required maintenance and service., • Perform daily routine preventive maintenance and maintain accurate daily repair logs., • Track inventory machinery/equipment with their respective spare parts., • Comply with OSHA safety and health rules., • Training: May be requested to provide training to future machine operators in their perspective roles., • Any additional duties as needed WHAT YOU NEED TO SUCCEED (Qualifications): • High school diploma or GED required; technical school, vocational training, or equivalent industrial maintenance or refrigeration experience preferred., • Bilingual in English & Spanish, strongly preferred, • 3-5 years’ of experience in an industrial maintenance mechanic role, preferably supporting industrial freezers, refrigeration systems, or related equipment in a manufacturing, packaging, or cold storage environment., • Knowledge with the following: Accepted practices and processes in the maintenance trades; electric motors, relays, PLCs, electro-mechanical equipment and systems found in machinery, including industrial freezer and refrigeration systems; servicing and maintenance of industrial equipment, including simple power, heating and cooling units., • Read and work from sketches, drawings and blueprints; understand occupational hazards and safety precautions of the machinery., • Ability to read and understand product specifications., • Forklift experience preferred, • Ability to lift up to 35 lbs. multiple times a day, • Ability to perform basic mathematical operations. Ability to bend, reach, kneel, and stand for extended period of time. WHAT WILL SET YOU APART (Competencies): • Good multitasking and prioritization skills., • Mechanically inclined., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Ability to work in a team environment., • Good time management skills., • Good analytical and problem-solving skills. WHY JOIN US: At Cryopak, we strive to offer a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Voluntary Accident, Critical Illness, and Hospital Indemnity Insurance, • Voluntary Life and AD&D, • Short-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job Description Dental Assistant - General Dentistry Join a supportive, patient-centered dental team where your skills truly matter. Are you a motivated, team-oriented Dental Assistant looking for a place to grow, feel valued, and make an impact each day? We’re seeking an enthusiastic professional to join our practice and contribute to an exceptional patient experience! Schedule: Monday: 9am-7pm Tuesday: 9am-7pm Wednesday: 9am-5pm Thursday: 9am-5pm Friday: 9am-5pm (alternating) Saturday: 8am-1pm Compensation & Benefits We offer a culture that values caring, professional development, growth, and sustainability. Our comprehensive and competitive benefits package includes but is not limited to: Competitive pay Medical, Dental and vision insurance options Short-term and long-term disability insurance Life insurance gifted to you 401(k) with employer match Paid time off and paid holidays A team culture focused on growth, communication, and high-quality care Work-life balance What You’ll Do As a key member of our team, you will help support smooth, efficient, and comfortable patient care by: Prepare treatment rooms and patients for dental procedures Assist the dentist chairside using four-handed dentistry techniques Sterilize and disinfect instruments, equipment, and operatories Take dental radiographs and impressions as directed by the dentist Educate patients on oral hygiene and postoperative care instructions Maintain accurate patient records and update charts in the practice management system Monitor inventory and inform Clinical Lead or Office Manager of supply needs Follow OSHA, CDC, and HIPAA protocols to ensure patient and team safety Support a team-first culture and uphold Squire Dental’s values in every interaction Work Environment & Physical Requirements Involving : Ability to stand, sit, and assist with procedures for extended periods, Manual dexterity to operate dental instruments and equipment, May be exposed to bloodborne pathogens, chemicals, and infectious materials, Use of appropriate personal protective equipment (PPE) required Other duties as it relates to the position Qualifications Required: High school diploma or equivalent Completion of an accredited dental assisting program or on-the-job training Active dental assistant certification/license as required by state law Current CPR/BLS certification Excellent communication and patient care skills Preferred: 1+ years of experience in a dental assisting role Proficiency in dental software systems (Denticon) Do not wait! Apply today! We are an Equal Opportunity Employer and prohibit discrimination or harassment of any kind. Employment decisions are based on qualifications, merit, and business needs. We are committed to fostering a professional and respectful workplace where all individuals have an equal opportunity to contribute and succeed, and where everyone has the opportunity to feel valued.

Job Description Job Title: Dental Assistant w/ X-ray Department/Location: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Compensation Information: $24.00-$27.00 per hour Company Overview ProSmile is the fastest growing dental organization on the East Coast and Midwest. Our premier DSO is led by world class dentists who understand what highly skilled dentists and dental professionals need to grow a practice while focusing on delivering the best-in-class clinical care to their patients. We offer up-to-date equipment and technology, experienced and friendly staff, and dentists who truly care about their patients, as well as competitive pay and, where applicable, a benefits package that includes medical, dental, vision, 401(k), training, and career growth opportunities. Position Summary As a Dental Assistant, you will help support the clinical needs of our patients and doctors. The duties of a dental Assistant are very important for the functionality of our dental offices. These duties can include patient care, recordkeeping, and appointment scheduling. As a Dental Assistant, you will work under the supervision of dentists and work closely with dental hygienists in their day-to-day activities. Duties and Responsibilities The duties include, but are not limited to: • Clearly demonstrate knowledge of dental instruments and assist the dentist in rendering patient care chairside., • Maintain inventory control in the operatories where treatment is rendered by the Provider., • Adhering to OSHA, HIPAA, and CDC guidelines., • Deliver world class patient interactions related to scheduling, follow up treatment, post-surgical information and record keeping., • Be able to perform basic lab procedures such as take impressions, pour models, and prepare cases for external labs., • Performs miscellaneous job-related duties as assigned. Qualifications • High School diploma or GED required., • Easily able to learn technologies and systems required and demonstrates a desire to learn, • Applicable licensing required for the state in which you will work:, • For NJ- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For MD- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For PA- Radiation Health and Safety certificate or willing to pursue licensure immediately required., • Certified Dental Assistant preferred., • 1+ years work experience as a Dental Assistant preferred., • Ability to work in a fast-paced environment., • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed., • X-ray License required., • Active CPR Certification is required. Knowledge and Skills/Expected Competencies • Knowledge of dental instruments and patient care., • Ability to clearly communicate medical information to professional practitioners and/or the general public., • Excellent organization, prioritization, follow up, analytical and time management skills with ability to handle multiple priorities and deadlines. Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs, • Financial Wellness and Planning Tools Physical/Mental Demands and Work Environment The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk and use hands and arms to operate general office equipment (PC, telephone, file cabinets, copier, fax machine and printer). The employee may occasionally lift and/or move between 10 and 25 pounds. Specific vision abilities required by this job include close vision and ability to adjust focus. The employee may need to travel to healthcare practices. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually low to moderate. The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR mQBKXFzgtV

Job Description Job Title: Traveling Dental Assistant w/X-ray Department: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Compensation Information: $25.00-$28.00 per hour Company Overview ProSmile is the fastest growing dental organization on the East Coast and Midwest. Our premier DSO is led by world class dentists who understand what highly skilled dentists and dental professionals need to grow a practice while focusing on delivering the best-in-class clinical care to their patients. We offer up-to-date equipment and technology, experienced and friendly staff, and dentists who truly care about their patients, as well as competitive pay and, where applicable, a benefits package that includes medical, dental, vision, 401(k), training, and career growth opportunities. Position Summary As a Traveling Dental Assistant, you will help support the clinical needs of our patients and doctors. The duties of a Dental Assistant are very important for the functionality of our dental offices. These duties can include patient care, recordkeeping, and appointment scheduling. As a Dental Assistant, you will work under the supervision of dentists and work closely with dental hygienists in their day-to-day activities. Duties and Responsibilities The duties include, but are not limited to: • Clearly demonstrate knowledge of dental instruments and assist the dentist in rendering patient care chairside., • Maintain inventory control in the operatories where treatment is rendered by the Provider., • Adhering to OSHA, HIPAA, and CDC guidelines., • Deliver world class patient interactions related to scheduling, follow up treatment, post-surgical information and record keeping., • Be able to perform basic lab procedures such as take impressions, pour models, and prepare cases for external labs., • Travel: over 80% travel between multiple orthodontic locations as assigned, providing chairside assistance and support to orthodontists and clinical teams. Maintain a flexible schedule to accommodate travel requirements., • Performs miscellaneous job-related duties as assigned. Qualifications • High School diploma or GED required., • Flexibility to travel between multiple locations and work variable hours as needed., • Easily able to learn technologies and systems required and demonstrates a desire to learn, • Applicable licensing required for the state in which you will work:, • For NJ- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For MD- Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • For PA- Radiation Health and Safety certificate or willing to pursue licensure immediately required., • Certified Dental Assistant preferred., • 1+ years work experience as a Dental Assistant preferred., • Ability to work in a fast-paced environment., • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed., • X-ray License required, • Active CPR/BLS certification is required and must be provided at the time of offer., • Performs miscellaneous job-related duties as assigned Knowledge and Skills/Expected Competencies • Knowledge of dental instruments and patient care., • Ability to clearly communicate medical information to professional practitioners and/or the general public., • Excellent organization, prioritization, follow up, analytical and time management skills with ability to handle multiple priorities and deadlines. Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs, • Financial Wellness and Planning Tools Physical/Mental Demands and Work Environment The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk and use hands and arms to operate general office equipment (PC, telephone, file cabinets, copier, fax machine and printer). The employee may occasionally lift and/or move between 10 and 25 pounds. Specific vision abilities required by this job include close vision and ability to adjust focus. The employee may need to travel to healthcare practices. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually low to moderate. The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR uiGYRon24S

Job Description Job Title: Registered Dental Assistant Department: Operations Reports to: Dental Practice Manager FLSA Status: Non-Exempt Compensation Information: $27.00-$32.00 per hour Company Overview ProSmile is the fastest growing dental organization on the East Coast and Midwest. Our premier DSO is led by world class dentists who understand what highly skilled dentists and dental professionals need to grow a practice while focusing on delivering the best-in-class clinical care to their patients. We offer up-to-date equipment and technology, experienced and friendly staff, and dentists who truly care about their patients, as well as competitive pay and, where applicable, a benefits package that includes medical, dental, vision, 401(k), training, and career growth opportunities. Position Summary As a Registered Dental Assistant, you will help support the clinical needs of our patients and doctors. The duties of a Dental Assistant are very important for the functionality of our dental offices. These duties can include patient care, recordkeeping, and appointment scheduling. As a Registered Dental Assistant, you will work under the supervision of dentists and work closely with dental hygienists in their day-to-day activities. Duties and Responsibilities The duties include, but are not limited to: • Clearly demonstrate knowledge of dental instruments and assist the dentist in rendering patient care chairside., • Maintaining inventory control in the operatories where treatment is rendered by the Provider, • Adhering to OSHA, HIPAA, and CDC guidelines, • Deliver world class patient interactions related to scheduling, follow up treatment, post-surgical information and record keeping, • Be able to perform basic lab procedures such as taking impressions, pour models, and preparing cases for external labs., • Remove excess cement from crowns or other restorations and orthodontic appliances;, • Fabricate and cement temporary crowns and bridges after preparation of tooth (teeth) by a dentist., • Placing and removing rubber dam and clamp., • This does not include intra-oral occlusal adjustment;, • Trial size (pre-select) orthodontic bands, wires, stainless steel crowns and temporary crowns intra-orally or on diagnostic models;, • Place and remove arch wires and ligature wires, • Remaining items that are within the scope of Registered Dental assistant., • Maintaining public area appearance, • Performs miscellaneous job-related duties as assignedQualifications, • High School diploma or GED required, • Easily able to learn new technologies and systems required and demonstrates a desire to learn, • Applicable licensing required for the state in which you will work: Dental Radiologic Technologist (DRT) license or willing to pursue licensure immediately required., • Certified Dental Assistant certificate preferred, • Registered Dental Assistant License preferred, • 1+ years work experience as a Dental Assistant preferred, • Ability to work in a fast-paced environment, • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed, • X-ray License required, • Current NJ Registered Dental Assistant license, • Active CPR Certification is required.Knowledge and Skills/Expected Competencies, • Knowledge of dental instruments and patient care., • Ability to clearly communicate medical information to professional practitioners and/or the general public., • Excellent organization, prioritization, follow up, analytical and time management skills with ability to handle multiple priorities and deadlines. Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs, • Financial Wellness and Planning Tools, • Eligible Dental Assistant team members may also have access to company-supported reimbursement for certain licenses and certifications, subject to role eligibility and company guidelines. Physical/Mental Demands and Work Environment The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk and use hands and arms to operate general office equipment (PC, telephone, file cabinets, copier, fax machine and printer). The employee may occasionally lift and/or move between 10 and 25 pounds. Specific vision abilities required by this job include close vision and ability to adjust focus. The employee may need to travel to healthcare practices. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually low to moderate. The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR fxjr3t7sCl

Director of Sales - Starborn \n \n Compensation: $160,000 - $180,000 plus bonus \n \n Director of Sales \n \n Company: Starborn Industries \n Reports To: General Manager \n Location: Edison, New Jersey \n \n Position Summary \n \n Starborn Industries is seeking a Director of Sales to lead and grow the company’s sales organization across national accounts, distribution channels, and decking manufacturer partners. \n \n Reporting to the General Manager, the Director of Sales will be responsible for developing and executing Starborn’s overall sales strategy, strengthening relationships with decking manufacturers, and leading a team responsible for driving profitable growth across the business. \n This is a hands-on leadership role requiring the ability to operate both strategically and tactically. The Director of Sales will work closely with product marketing, operations, and senior leadership to identify growth opportunities, improve market penetration, support new product launches, and ensure Starborn continues to deliver a high level of service to its customers. \n \n Key Responsibilities \n\n • Directly owns the relationship with the decking manufacturers\n, • Develop and execute the overall sales strategy to achieve revenue, margin, and market-share objectives.\n, • Lead, coach, and develop the sales organization, including: 4 Channel Market Managers and 4our Territory Managers covering NY, NJ, PA, DE, and MD.\n, • Maintain and expand relationships with key national accounts, distributors, dealers, and strategic channel partners.\n, • Establish clear sales goals, performance expectations, and accountability across the sales organization.\n, • Identify opportunities to expand Starborn’s presence within existing customers, channels, and geographic markets.\n, • Partner with Marketing and Product Management to successfully commercialize new products and support product launches.\n, • Provide customer and market feedback to help guide product development, innovation, pricing, and go-to-market strategy.\n, • Partner with Operations and Supply Chain to align customer demand, inventory, service levels, and growth initiatives.\n\n \n Qualifications \n\n • 5+ years of progressive sales experience, preferably within building materials, construction products, hardware, fasteners, or a related industry.\n, • 3+ years of sales leadership experience with responsibility for managing and developing sales professionals.\n, • Demonstrated success growing sales through distribution, dealer, national account, and/or retail channels.\n, • Strong understanding of account management, channel strategy, forecasting, and sales planning.\n, • Proven ability to build relationships with customers at both the field and executive level.\n, • Strong leadership, communication, negotiation, and analytical skills.\n, • Ability to work cross-functionally with Marketing, Product Management, Operations, Finance, and senior leadership.\n\n \n Leadership Profile \n \n The successful candidate will be a commercially minded, hands-on sales leader who combines strong customer relationships with disciplined sales management. This individual should be comfortable moving between executive-level customer discussions, coaching territory salespeople, reviewing sales performance, supporting new product launches, and helping shape the broader growth strategy of Starborn Industries. \n \n Required Travel: 40% \n \n About Starborn Industries \n \n Starborn Industries is a leading provider of branded fastening solutions and comprehensive installation systems for decking, exterior, and related applications. Founded in 1961 and headquartered in Edison, New Jersey, Starborn has built a reputation for quality, innovation, and reliability across its portfolio of trusted brands, including DECKFAST®, PRO PLUG®, CAP-TOR® xd, HEADCOTE®, and SMART-BIT®. The Company’s products serve residential and commercial construction markets through a broad network of national distributors, dealers, and co-branding partnerships with decking and trim manufacturers. \n For more information, please visit www.starbornindustries.com.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary Benefits/Perks • Competitive Compensation, • Career Advancement Opportunities, • Consistent workload, • Supportive , professional team enviroment, • Hourly Rate between $ 20-$50 depending on knowledgeJob Summary We are looking for a skilled and experienced Plumber to join our team! In this role, you will perform diagnostics, service, and installation of plumbing in residential and commercial environments systems. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities • Assemble pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, soldering, brazing, or welding equipment, • Install pipe assemblies, fittings, valves, appliances such as dishwashers or water heaters, or fixtures such as sinks and toilets, using hand or power tools, • Read and interpret blueprints and job plans, • Perform maintenance of water supply systems, • Install and maintain gas and liquid heating systems, • Professionally interact with customers and clearly communicate work orders and statuses, • Follow safety standards and company procedures, • Ability to handle rough, finish and service efficiently, • Valid drivers's license and reliable transportation, • Perform rough plumbing installations for new construction and remodels, • Complete finish plumbing including fixtures, trim-outs, and final connectionsQualifications, • Minimum 3 years of professional experience, • Strong knowledge of residential and commercial systems, • Ability to handle plumbing tools and equipment, • Ability to work independently, • Stron work ethic and problem solving skills

About Eos Energy Enterprises \n Eos Energy Enterprises, Inc. is accelerating the shift to American energy independence with positively ingenious solutions that transform how the world stores power. Our breakthrough Znyth™ aqueous zinc battery was designed to overcome the limitations of conventional lithium-ion technology. It is safe, scalable, efficient, sustainable, manufactured in the U.S., and the core of our innovative systems that today provides utility, industrial, and commercial customers with a proven, reliable energy storage alternative for 3 to 12-hour applications. Eos was founded in 2008 and is headquartered in Edison, New Jersey. For more information about Eos (NASDAQ: EOSE), visit eose.com. \n \n Overall Job Summary: \n The Electrical Systems Engineer is responsible for the design, integration, testing, and support of communications, uninterruptible power supply (UPS), auxiliary power, and related electrical systems. This role ensures system reliability, regulatory compliance, and successful deployment by collaborating with cross-functional teams throughout the project lifecycle. The engineer provides technical expertise in system architecture, power distribution, equipment integration, troubleshooting, and commissioning activities to support critical infrastructure and operational requirements. \n Job Responsibilities: \n\n • Design, integrate, and support communications, UPS, auxiliary power, and related electrical systems to meet project, customer, and regulatory requirements.\n, • Develop engineering deliverables including system architectures, single-line diagrams, wiring schematics, interface documentation, and technical specifications.\n, • Perform electrical analyses, equipment selection, and system sizing for power distribution, battery backup, UPS, and communications infrastructure.\n, • Coordinate with internal teams, customers, contractors, and vendors to ensure successful system integration and project execution.\n, • Lead troubleshooting, root cause analysis, and resolution of electrical, communications, and system integration issues during design, installation, and operation.\n, • Develop and execute testing, validation, commissioning, Factory Acceptance Testing (FAT), and Site Acceptance Testing (SAT) activities to verify system performance in partnership with Product teams\n, • Ensure compliance with applicable electrical codes, industry standards, safety requirements, and quality processes.\n, • Prepare and maintain engineering documentation, reports, configurations, and as-built records throughout the project lifecycle.\n\n Education/Experience: \n\n • Bachelor’s degree in electrical engineering or related discipline required\n, • Minimum 5 years of experience\n\n Skills/Abilities: \n\n • Experience with communications, UPS, battery backup, and auxiliary power systems.\n, • Ability to read and interpret electrical drawings, schematics, and technical documentation.\n, • Knowledge of electrical codes, standards, and engineering best practices.\n, • Strong troubleshooting, analytical, and problem-solving skills.\n, • Excellent written and verbal communication skills.\n, • Experience with critical infrastructure, transportation, utility, industrial, or telecommunications environments.\n, • Familiarity with SCADA, network communications, fiber optic systems, or industrial control systems.\n, • Experience supporting commissioning, field testing, and startup activities.\n, • Knowledge of AutoCAD, MicroStation, ETAP, SKM, or similar engineering software.\n\n Travel \n\n • Overnight/North America: 10-25%\n\n Working Conditions \n\n • Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 25 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.\n, • Factory - The worker may be subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, vibration, moving vehicles, electrical current, exposure to temperature changes or exposure to chemicals. While performing the duties of this job, the employee may be exposed to fumes, airborne particles, odors, dust, mists, and gases. The noise level in the work environment can be loud. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Machinery operation requires the use of safety equipment to include but not limited to eye safety glasses, hearing protectors, work boots, and lab coats. May be required to exert up to 50 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.\n\n

Client Overview A well-established manufacturing organization specializing in the design, development, and production of highly engineered products for regulated industries. The company offers a collaborative, hands-on environment where technical leaders have significant influence on product innovation, operational excellence, and team development. Our client is seeking an Engineering Manager - Manufacturing to lead a multidisciplinary engineering team focused on the design, development, qualification, and support of advanced power conversion products.\n \n Salary/Hourly Rate $160k - $200k\n \n Position Overview The Engineering Manager - Manufacturing will lead a multidisciplinary engineering team focused on the design, development, qualification, and support of advanced power conversion products. This role combines technical leadership with people management and will oversee both new product development and sustaining engineering activities.\n \n \nThe ideal candidate is a highly technical electrical engineering professional with deep power electronics expertise, strong leadership skills, and the ability to drive execution in a fast-paced, hands-on environment.\n \n Responsibilities Of The Engineering Manager - Manufacturing \n\n • Lead, mentor, and develop a team of electrical and mechanical engineers.\n, • Manage engineering priorities, resource allocation, and project execution to meet business objectives.\n, • Serve as the senior technical authority for product design, system architecture, and engineering decisions.\n, • Oversee the development of new products from concept through qualification and production release.\n, • Drive engineering performance, throughput, and continuous process improvement initiatives.\n, • Lead root cause analysis and corrective action activities related to design, testing, and field performance.\n, • Approve design documentation, engineering changes, test plans, qualification reports, and technical analyses.\n, • Coordinate cross-functionally with manufacturing, quality, operations, and supply chain teams.\n, • Support customer-facing technical discussions, design reviews, and proposal development activities.\n, • Manage sustaining engineering efforts including field support, product improvements, and component obsolescence.\n, • Establish and improve engineering processes, standards, and best practices.\n, • Manage select engineering projects and initiatives from planning through completion. \nRequired Experience/Skills For The Engineering Manager - Manufacturing \n\n • Minimum 10 years of electrical engineering and product development experience.\n, • Authorised to work in the United States (citizen or green card holder).\n, • Strong background in power electronics, power conversion systems, or switching power converter design.\n, • Minimum 3 years of technical leadership or engineering management experience.\n, • Proven experience leading and developing engineering teams.\n, • Experience with systems engineering, requirements management, verification planning, and product qualification.\n, • Ability to balance technical leadership with project and people management responsibilities.\n, • Experience conducting root cause analysis, failure investigations, and corrective actions.\n, • Strong project prioritisation, organisational, and decision-making skills.\n, • Excellent communication and customer-facing presentation skills.\n, • Ability to travel up to 10% as needed. \nPreferred Experience/Skills For The Engineering Manager - Manufacturing \n\n • Master's degree in Electrical Engineering or Power Electronics.\n, • Aerospace, defense, electronics, or other highly regulated manufacturing experience.\n, • Experience with APQP or other structured product development methodologies.\n, • Experience supporting products through qualification and production release.\n, • Familiarity with environmental, electromagnetic compatibility, and reliability testing standards.\n, • Experience with FMEA, FMECA, fault tree analysis, and other reliability engineering tools.\n, • Experience using ECAD tools such as PADS or similar schematic design software.\n, • Experience authoring technical proposals, compliance documentation, and customer-facing technical deliverables. \nEducation Requirements \n\n • Bachelor’s Degree in Electrical Engineering required.\n, • Master’s Degree in Electrical Engineering, Power Electronics, or a related discipline preferred. \nBenefits \n\n • Medical, Dental, and Vision Insurance\n, • Life Insurance\n, • 401(k) Plan\n, • Paid Time Off\n, • Paid Holidays\n, • Sick Time\n, • Relocation assistance available for qualified candidates\n, • Career advancement opportunities within a growing engineering organization \n

Job Description We are looking for experienced Commercial / Residential HVAC Service Techs to join our team ! You will install, service and repair Heating and Air Conditioning Systems. Competitive Pay: $5000 signing bonus If you have the Skill's, Knowledge and Experience needed. Responsibilities : Install new Heating, Ventilation, and Air Conditioning Systems Inspect and preform equipment repairs and replacements Respond to emergency maintenance request's and routine preventative maintenance Adhere to all Safety Policies and Procedures Qualifications : Previous experience in HVAC or other related fields Experience, with Electrical Wiring Diagrams Ability to handle physical workload, and solving problems and critical thinking skills. 5 Years experience $ 5000 Signing Bonus Job Type: Full-Time Benefits : 401 ( K ) with matching Dental Insurance Flexible Schedule Health Insurance Life Insurance Paid Time Off Vision Insurance Work Location : In person \nCompany Description Family environment, great place to work learn and grow your skills, great compensation package. Family environment, great place to work learn and grow your skills, great compensation package.

Job Description We are looking for an HVAC Service Technician to join our team! You will install, service, and repair heating and air conditioning systems. Responsibilities: • Install new heating, ventilation, and air conditioning systems, • Inspect and perform equipment repairs and replacements, • Perform routine preventative maintenance, • Respond to emergency maintenance requests, • Adhere to all safety policies and procedures Qualifications: • Previous experience in HVAC or other related fields, • Familiarity with HVAC wiring diagrams, • Ability to handle physical workload, • Strong problem solving and critical thinking skills