Trabajos foreman en New York, New YorkCrear alertas

Job DescriptionThis position will perform routine and non-routine maintenance, diagnostic and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. Performs work under minimal supervision. Handles more complex problems and can resolve independently. All work is performed with a commitment to safety. May mentor or provide informal guidance to Technician I and/or Technician II. Also, may act as a Shift Foreman and may receive a shift premium.In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis.$28.00/hrMajor Responsibilities • Ensure vehicles are maintained and safe for our customers by performing limited repairs with minimal supervision on both basic and complex maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components., • Perform mechanical repairs under minimal supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliers., • Diagnoses and performs accurately all phases of vehicle and equipment repair under minimal supervision. May perform diagnostic tests utilizing a computer and manufacturer's software to determine mechanical defects., • Lead preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Remove, overhaul and reinstallation of mechanical components with minimal Tech in Charge supervision, • Notify supervisor of potentially dangerous equipment and corrective action taken, • Evaluates completed work prior to release and seeks approval where required, • Leads road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Moves vehicles safely between job and work area, • Repair and maintain all shop equipment, • Other responsibilities as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement required (or expected within 3 months of hire), • State inspection license (if required), • ASE Certification preferred. Must participate in ASE testing program (expected to have 6 ASE within 6 months of hire) Minimum Experience or Skills Required • Advanced mechanical aptitude and 5 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Advanced problem-solving ability, • Advanced computer skills, • Comfortable using hand tools, • Excellent customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds, • Ability to work in a crouched position or on back, lying on mechanic's creeper, beneath motor vehicle equipment Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management's assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf. \nCompany Description About us An industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America. Industry leader We safely operate more than one third of all contracted school buses in North America. Together our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon. We operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces. Innovation We were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling. Passionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route. Awards & recognition We won the Occupational Excellence Achievement Award from the National Safety Council two years in a row. Dedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America. Teamwork and trust It takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners. We’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience. Our culture We live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve. Safety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives. Learning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future. Making a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day. Careers for all – We’re an Equal Opportunity Employer and an Employer of Choice. By consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference. About us\r\nAn industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America.\r\n\r\nIndustry leader\r\nWe safely operate more than one third of all contracted school buses in North America.\r\nTogether our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon.\r\nWe operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces.\r\n\r\nInnovation\r\nWe were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling.\r\nPassionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route.\r\n\r\nAwards & recognition\r\nWe won the Occupational Excellence Achievement Award from the National Safety Council two years in a row.\r\nDedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America.\r\n\r\nTeamwork and trust\r\nIt takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners.\r\n\r\nWe’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience.\r\n\r\nOur culture\r\nWe live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve.\r\n\r\nSafety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives.\r\nLearning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future.\r\nMaking a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day.\r\nCareers for all – We’re an Equal Opportunity Employer and an Employer of Choice.\r\nBy consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.

Job Description This position will perform routine and non-routine maintenance, diagnostic and repair work on vehicles (buses, vans etc.) which adheres to First Student standards. Performs work under minimal supervision. Handles more complex problems and can resolve independently. All work is performed with a commitment to safety. May mentor or provide informal guidance to other Technicians in the shop. Also, may act as a Shift Foreman and may receive a shift premium. In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis. $36.07/hr based on CBA Major Responsibilities • Ensure vehicles are maintained and safe for our customers by performing limited repairs with minimal supervision on both basic and complex maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components., • Perform mechanical repairs under minimal supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliers., • Diagnoses and performs accurately all phases of vehicle and equipment repair under minimal supervision. May perform diagnostic tests utilizing a computer and manufacturer's software to determine mechanical defects., • Lead preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Remove, overhaul and reinstallation of mechanical components with minimal Tech in Charge supervision, • Notify supervisor of potentially dangerous equipment and corrective action taken, • Evaluates completed work prior to release and seeks approval where required, • Leads road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Moves vehicles safely between job and work area, • Repair and maintain all shop equipment, • Other responsibilities as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement required (or expected within 3 months of hire), • State inspection license (if required), • ASE Certification preferred. Must participate in ASE testing program (expected to have 6 ASE within 6 months of hire) Minimum Experience or Skills Required • Advanced mechanical aptitude and 5 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Advanced problem-solving ability, • Advanced computer skills, • Comfortable using hand tools, • Excellent customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds, • Ability to work in a crouched position or on back, lying on mechanic's creeper, beneath motor vehicle equipment Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management's assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf. \nCompany Description About us An industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America. Industry leader We safely operate more than one third of all contracted school buses in North America. Together our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon. We operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces. Innovation We were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling. Passionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route. Awards & recognition We won the Occupational Excellence Achievement Award from the National Safety Council two years in a row. Dedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America. Teamwork and trust It takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners. We’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience. Our culture We live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve. Safety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives. Learning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future. Making a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day. Careers for all – We’re an Equal Opportunity Employer and an Employer of Choice. By consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference. About us\r\nAn industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America.\r\n\r\nIndustry leader\r\nWe safely operate more than one third of all contracted school buses in North America.\r\nTogether our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon.\r\nWe operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces.\r\n\r\nInnovation\r\nWe were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling.\r\nPassionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route.\r\n\r\nAwards & recognition\r\nWe won the Occupational Excellence Achievement Award from the National Safety Council two years in a row.\r\nDedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America.\r\n\r\nTeamwork and trust\r\nIt takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners.\r\n\r\nWe’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience.\r\n\r\nOur culture\r\nWe live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve.\r\n\r\nSafety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives.\r\nLearning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future.\r\nMaking a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day.\r\nCareers for all – We’re an Equal Opportunity Employer and an Employer of Choice.\r\nBy consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.

Job DescriptionBenefits: • 401(k), • Competitive salary, • Opportunity for advancement Traveling Commercial Electrical Foreman We're a fast-growing commercial electrical contractor expanding our team. We're looking for an experienced Electrical Foreman who takes pride in leading crews the right way — on time, on budget, and built to last. This position requires traveling to out-of-state job sites for the work week, with the potential of also working close to home — as we are a NJ-based company. What You'll Do • Supervise and lead electrical crew on active commercial job sites, • Ensure quality installations and adherence to safety standards, • Coordinate with project managers and other trades to keep the job moving, • Read and interpret blueprints and electrical drawings, • Identify and resolve field issues before they become problems, • Maintain a productive, accountable job site cultureWhat You Need, • Proven experience running commercial electrical projects in the field, • Strong leadership and communication skills, • Hands-on approach — you lead from the front, not the sideline, • Solid knowledge of electrical installation methods, NEC standards, and jobsite coordination, • Valid driver's license and reliable transportation, • Must own basic hand toolsWhat You Get, • Competitive pay based on experience, • Full-time, stable position with long-term potential, • Real growth opportunity with a company that's scaling fast, • A team that values craftsmanship, integrity, and accountabilityJob Type: Full-time Experience: • Commercial electrician: 5 years (Required), • Management: 2 years (Required), • Conduit bending: 3 years (Required)License/Certification:, • Driver's License (Required)Ability to Commute:, • Within the Northeastern U.S. (Required)Work Location: In person

Job DescriptionDescription: Controlled Combustion is the leading heating contractor in NYC. We serve a variety of industries, including luxury apartments, hospitals, universities, and more. With over 150 employees, our team is as diverse as the services we offer. We’re looking for a hands on Electrical Foreman / Project Manager to oversee the electrical scope for boiler rooms, burner upgrades, controls, and capital improvement projects across NYC. Please note that this is a field first, in person role. Most time will be spent on active job sites across the five boroughs with regular visits to our Bronx headquarters. Hybrid/remote is not available for this position. Responsibilities • Lead day to day field operations for the electrical scope: plan work, set goals, assign tasks, and supervise crews and subcontractors., • Interpret plans/specs; perform layout for feeders, panels, EMT/RMC, junction boxes, equipment terminations, and control wiring., • Oversee installation, testing, and commissioning of motors, starters, VFDs, PLC adjacent control wiring, sensors, and BMS interfaces in boiler/mechanical rooms., • Coordinate closely with plumbers, HVAC techs, burner/controls technicians, and site supers to sequence work in occupied buildings., • Develop short interval schedules; attend project meetings; run daily huddles and toolbox talks., • Order, stage, and track materials, tools, and rental equipment; manage vendors for on time deliveries., • Maintain documentation: daily reports, as builts, redlines, submittals, RFIs, change orders, and closeout packages., • Enforce safety policies (OSHA, NYC DOB, site specific rules); conduct jobsite inspections and corrective actions., • Coordinate inspections and utility cutovers; interface with AHJs (DOB/Con Edison) as needed., • Drive quality control: pre functional checks, point to point testing, start up/commissioning support, and punch list closure. Schedule • Full time, Monday–Friday., • Day shift; occasional evenings/weekends for cutovers or emergencies., • Overtime as needed based on project timelines. Benefits • 401(k), • Dental insurance, • Health insurance, • Health savings account, • Paid time off, • Vision insurance Work Location In person; Bronx, NY 10458 (required). Daily travel to project sites across NYC. Requirements: Qualifications / Skills • Strong planning, organization, and crew leadership; capable of running multiple jobs at once., • Expert knowledge of the NEC and working familiarity with the NYC Electrical Code for commercial/multifamily work., • Ability to read/markup electrical drawings and risers; produce simple sketches and take offs., • Proficient with 120/208V and 277/480V three phase power distribution, motor controls, and low voltage control circuits., • Experience with VFDs, starters, interlocks, safeties, and integration with burner/boiler control systems and BMS., • Strong communication and documentation; comfortable with MS Office (Outlook/Excel/Word) and mobile project apps., • Proactive, detail oriented problem solver who thrives in fast paced, occupied environments. Certifications & Licensure • OSHA 30 (required) and NYC Site Safety Training (SST) (preferred)., • Valid NYS Driver License (required). Minimum Education & Work Experience • High school diploma or equivalent (required); completion of an electrical apprenticeship or trade school (preferred)., • 7+ years in the electrical trade with 2+ years leading crews as a foreman or assistant PM., • Experience in heating, oil & gas, boilers/burners, HVAC/mechanical rooms, or construction in NYC is a strong plus.

Job DescriptionAbout the Job:Are you looking to join a fast-paced, 2nd generation family-owned General Construction & Architectural Design Firm in the middle of another significant growth phase? G-Net Construction is offering an exciting full-time opportunity for a Lead Electrician. This hands-on role is perfect for a motivated individual ready to grow and take on leadership responsibilities while working directly for us. We’re seeking someone to lead our existing team of assistant electricians and manage a variety of electrical projects, including 24/7 emergency/maintenance services. This role provides opportunities for career advancement and training, with a path to supervisory roles for those who excel. Compensation:Hourly wage is based on experience. The position is full-time, 40 hours per week, with standard work hours from 8:00 AM to 4:00 PM, Monday through Friday. Overtime is available for 24/7 emergency calls. Responsibilities: • Lead and manage electrical projects, including panel and sub-panel replacements, light fixture installations, and power feed upgrades for HVAC equipment., • Run fire alarm wiring and install fire alarm devices., • Install low voltage telephone and IT cabling, conduits, and new wall switches and outlets., • Read and interpret electrical and architectural drawings/blueprints., • Ensure compliance with NYC Electrical Building codes., • Oversee the daily use and maintenance of a company-provided van stocked with tools and materials., • Respond to 24/7 emergency service calls as needed. Qualifications: • At least 5 years of hands-on field experience in electrical and low voltage work., • Strong knowledge of NYC Electrical Building codes., • Current OSHA-40 card (SST card and FDNY Certificate of Fitness are pluses)., • Experience reading and interpreting blueprints and drawings., • Must have valid driver’s license and live on Staten Island., • Own electrical hand and power tools as well as PPE., • Experience managing a team or leading projects is a plus. Growth Opportunities:G-Net Construction offers significant career development opportunities, including advancement to supervisory roles and additional training for motivated employees. This role has room to grow within the company and the potential for greater responsibilities in the future. Application Process:To apply, please submit your resume, cover letter, and provide details on any certifications, prior projects. Qualified candidates will be contacted for an in-person interview. About G-Net Construction Corp.:For over 65 years, the Nativo Family has earned recognition as being a leader and respected in all five boroughs of New York City, providing General Contracting, Architectural and Building Maintenance Services to a variety of commercial & medical clients and nonprofit organizations. G-Net Construction specializes in several industry sectors, such as Hospitals, Nonprofit Organizations, Schools, Commercial, Medical Facilities, Mold Remediation, Fire Restoration and Sustainable projects. What We Do: • Building Construction & Interior Renovation., • Architecture & Design / Build Services., • Mold / Fire Remediation & Restoration., • Comprehensive Building Maintenance. SEO Keywords:Lead Electrician; Full-Time Electrician Jobs; Staten Island Electrician; Team Leader; Licensed Electrician; Electrical Panel Upgrades; Commercial Electrician; OSHA-40; Journeyman; Fire Alarm; Low Voltage; Electrical Code Compliance; Electrical Maintenance; Project Manager; Emergency Electrical Services; Blueprint Skills; Electrical Foreman; Commercial Electrician; Supervisor

Job Description Description TEKsystem's is seeking an inventory specialist to handle the shipping and receiving for the Prefabrication dept. The following skills will be required. 1.) Procurement system proficiency ability to update and manage inventory independently. (knowledge of material from electrical shop or trade shops is a plus) 2.) Material coordination field requests, staging, and fulfillment from job site lists 3.) Cross-functional communication Comm with PMs and purchasing dept when needs arise, sourcing , or communicating timelines. Part number is different than what was purchased Manufacturer differs from what was purchased Quantity does not match what was purchased 1. Staging material in prefab when requested by the prefabrication foreman. Skills Asset inventory, verify inventory, electrical, electrician, high voltage, switches, outlets Top Skills Details Asset inventory,verify inventory,electrical,electrician,high voltage,switches,outlets Additional Skills & Qualifications Professionalism, timeliness, hard working Job Type & Location This is a Contract to Hire position based out of Pearl River, NY. Pay and Benefits The pay range for this position is $25.00 - $25.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract to Hire position based out of Pearl River, NY. Application Deadline This position is anticipated to close on Oct 29, 2026. Workplace Type This is a fully onsite position in Pearl River,NY. About TEKsystems We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services Were a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. Were a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. Were strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. Were building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Responsibilities: • Operate and drive trucks safely and in compliance with DOT regulations., • Read and follow location and road maps to determine the best routes., • Conduct pre-trip and post-trip vehicle inspections to ensure compliance and safety., • Load and unload cargo using a Crane operator (HMO license required)., • Perform routine vehicle maintenance and report any mechanical issues., • Maintain and verify delivery paperwork for accuracy., • Follow all safety procedures and company policies., • Assist the Yard Foreman with warehouse and yard duties when not driving. Qualifications: • CDL Class A license (required)., • Valid Hoisting Machine Operator (HMO) license (required)., • Minimum 2 years of commercial driving experience, preferably in construction., • Experience handling heavy equipment and oversized loads., • Knowledge of DOT regulations and safe driving practices., • Ability to lift and secure heavy loads., • Strong communication and organizational skills. Job Type: Full-time Benefits: • Paid time off Trucking Driver Type: • Company driver Trucking Route: • Local Work Days: • Monday to Friday License/Certification: • CDL (Required) Work Location: In person

Job Description High-end Moving and Storage company located in the Bronx is seeking experienced Truck Drivers, Drivers will also be responsible for assisting their Foreman & Helpers with the loading and unloading of furniture from the vehicle. Ability to perform heavy lifting is necessary. Compensation: $17.75 - $24.00 per hour (based on experience) Pay: Base hourly wage with opportunities for overtime. Cash tips directly to the team from satisfied customers, rewarding your hard work and dedication. Schedule: Monday – Friday Early AM to Completion We pride ourselves on giving our employees the time to relax and enjoy the weekend. MUST HAVE ... • Prior truck driving experience OR Mover Helper experience, • Excellent customer service skills, • Valid Drivers License, • Good driving record/history, • DOT Medical Card, • Moving/Mover Experience COMPENSATION: • Mover Helper $17.75 - $19.00, • Non-CDL $19.00 - $20.00/hr., • CDL A - B $22.00/hr - $24.00/hr, • Guaranteed 40 hours every week, year-round, • Guaranteed overtime pay after 8 hours on any day, • Tips and Gratuities BENEFITS: • Paid vacations and holidays, • Company supported medical benefits, • 401k, • Generous gratuities, • Company bonus plan

Job Description TOP TECHNICIAN NEEDED! We are currently seeking a Master Automotive Technician to become an integral part of our team! We need a top level tech to complement our team. Hours and pay are negotiable and flexible. We are looking to pay top price for a top technician. Experience, certifications and level will determine level of pay. If interested and would like to do less hands on, we have options to be the shop foreman as well. You will diagnose, adjust, repair, and overhaul automotive vehicles. Responsibilities: • Diagnose and repair automotive vehicles, • Perform routine vehicle tune-ups and maintenance, • Inspect and test new vehicles for necessary adjustments Qualifications: • Previous experience as an automotive technician, mechanic, or other related fields, • Knowledge of diagnostic and repair equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented\nCompany Description Family owned automotive repair business in a great town with great clientele. Family owned automotive repair business in a great town with great clientele.

Job DescriptionWe are seeking an experienced and skilled Automotive "A" Technician/Foreman to join our team. As an Automotive Technician, you will be responsible for diagnosing, repairing, and maintaining various types of vehicles. If you have a passion for automotive technology and enjoy working in a fast-paced environment, we want to hear from you. Flat rate pay upon qualifications Duties: • Diagnose and repair vehicle issues, such as engine problems, electrical malfunctions, and transmission failures, • Conduct thorough inspections of vehicles to identify any potential issues or safety concerns, • Use diagnostic tools and equipment to accurately diagnose and troubleshoot vehicle problems, • Complete repairs efficiently and effectively, ensuring high-quality workmanship, • Keep accurate records of all repairs and maintenance performed on vehicles, • Provide excellent customer service by addressing customer concerns and answering any questions they may have, • Stay up-to-date with the latest automotive technology advancements and industry trends Requirements: • Proven experience as an Automotive Technician or similar role, • Strong knowledge of automotive systems, including engines, transmissions, brakes, and electrical systems, • Proficient in using diagnostic tools and equipment to identify vehicle problems, • Excellent problem-solving skills with the ability to diagnose complex issues, • Strong attention to detail and accuracy in performing repairs and maintenance tasks, • Ability to work independently with minimal supervision, • Excellent communication skills with the ability to explain technical concepts to non-technical individuals, • Valid driver's license with a clean driving record

Job DescriptionWorking Shop Foreman / Head Technician Hands-On Fleet Shop Manager | Mechanical Repair & Body Shop Location: Long Island City, Queens, NY | Full-time, on-site Reports to: General Manager, working directly with ownership Pay: $105,000–$125,000 base, plus performance bonus This is a working leadership role for an experienced mechanic who can diagnose difficult repairs, direct a busy team and keep vehicles moving safely through the shop. It is not a desk-only manager or service-writer job. Prior NYC taxi-garage experience is strongly preferred. About WB Taxi WB Taxi owns and maintains about 400 NYC yellow taxis and supports 1,000+ active drivers. Our Long Island City mechanical and body shops run 24/7, 365 days a year. We need a dependable, high-energy leader who knows the pace of a taxi garage and can return safe, reliable vehicles to service with minimal avoidable downtime. Responsibilities • Shop floor: Set priorities, assign jobs by skill and keep bays moving across urgent repairs, preventive maintenance, inspections and longer jobs. Catch delays early; every down vehicle should have a technician, a next step and a realistic completion time., • Head technician: Personally diagnose difficult mechanical, electrical and drivability problems, assist with repairs and coach technicians. Verify diagnoses, find root causes and prevent unnecessary parts replacement while keeping oversight of the whole shop., • Team leadership: Give clear instructions, monitor progress and workmanship, train mechanics and helpers, and address attendance and productivity promptly and respectfully. Coordinate coverage and shift handoffs; recommend staffing and performance actions., • Parts and records: Coordinate parts ordering and follow up on delays, track warranties and returns, and keep accurate work orders. Organize preventive maintenance, flag recurring failures, repeat work and excessive costs, and escalate repair-versus-replace decisions., • Body work and taxi prep: Coordinate collision repair, body work, reassembly and mechanical work with staff and vendors. Track hack-ups, inspection readiness and rechecks, and coordinate wheelchair-accessible vehicle work with qualified personnel., • Quality, safety and reporting: Verify repairs and arrange road tests before release. Never return an unsafe vehicle to meet a deadline. Enforce safe equipment use and an orderly shop. Give the GM a daily update on vehicles down, completed repairs, parts shortages, open problems and expected return-to-service times.Required, • Substantial hands-on automotive repair and diagnostic experience, plus experience directing mechanics in a busy shop, • Ability to use diagnostic equipment and service information, check others’ work, juggle priorities and follow jobs through, • Consistent pace, sound judgment, reliable attendance and follow-through, • Clear communication with technicians, drivers and management; basic digital record-keeping, • Comfort in a demanding, high-volume garage, • Valid driver’s license for moving and road-testing vehicles, • Ability to perform essential shop duties safely, with or without reasonable accommodationStands out Foreman, head mechanic or working-manager experience in an NYC yellow-taxi garage is strongly preferred. Livery, rideshare, rental or other high-mileage fleet experience is also valuable, as are Toyota and hybrid diagnostics, wheelchair-accessible vehicles, body-shop coordination, TLC inspection prep, taxi hack-ups and leading a diverse, multilingual team. No college degree or luxury-dealership background required; we value proven repair knowledge, leadership and results. Schedule This role supports a 24/7 fleet. Expect long shifts, extended hours during heavy periods, weekend coverage and scheduled after-hours escalation. Your regular workweek, hours and coverage will be agreed before an offer. Coverage is shared with management and other staff; no one person covers every shift. How success is measured Fewer avoidable vehicle-down days, dependable completion times, fewer repeat repairs, timely preventive maintenance and inspection prep, productive technicians, accurate records, and controlled parts and repair costs. Speed and savings never outrank safe, correct repairs. How to apply Apply through this posting with a resume or work-history summary. Include where you’ve worked, your responsibilities, how many technicians you supervised, your strongest diagnostic skills, your availability and any NYC taxi-garage experience. References may be requested. WB Taxi is an equal opportunity employer. Applicants are evaluated on job-related qualifications and ability to perform the essential duties, with reasonable accommodations where required.

Job DescriptionBenefits: • Health insurance Job Title: HVAC Project Foreman Location: Shop located in Corona, NY, 95% of work in Manhattan, all other work in the boroughs Job Type: Full-Time Job Summary: We are looking for a motivated and skilled HVAC Technician who is eager to grow into a leadership role as a Project Foreman. This is an excellent opportunity for a hands-on technician who wants to advance their career by developing supervisory and project management skills. Key Responsibilities: ● Perform installation, maintenance, and repair of HVAC systems, as required, according to company standards. ● Troubleshoot and resolve HVAC system issues efficiently and safely. ● Support project documentation and reporting efforts. ● Participate in safety meetings and comply with all safety regulations. ● Collaborate with project teams and subcontractors on-site. ● Demonstrate leadership potential by taking initiative and learning project management tasks. ● Progressively take on more responsibility leading toward a Project Superintendent role. Qualifications: ● 5-7+ Years experience as an HVAC Technician or relevant technical training. ● Strong mechanical aptitude, problem-solving skills, familiarity with field service apps for work tickets etc. ● Willingness to learn and grow into a supervisory role. ● Good communication and teamwork skills. ● Ability to troubleshoot effectively, read blueprints and technical manuals. ● Valid driver’s license and clean driving record. ● Up to date certifications – FDNY F-60 & G-60, OSHA 40 or 62 and EPA 608 are mandatory. What We Offer: ● Competitive pay. ● Comprehensive benefits. ● Clear career advancement path from Technician to Project Foreman. ● Supportive work environment focused on growth and safety. How to Apply: Submit your resume and references to be considered.

Job Description AUTOMOTIVE TECHNICIAN / AUTO MECHANIC / SERVICE TECHNICIAN – MASTER TECH – UP TO $150,000+ PER YEAR CarGuys Inc. – High-Paying Automotive Technician Jobs Nationwide JOB TYPE Full-Time High Pay + Bonus Opportunities ABOUT THE ROLE CarGuys Inc., America’s and Canada’s #1 Automotive Recruiter, connects automotive technicians, auto mechanics, and service technicians with top-paying dealerships and repair facilities across the U.S. and Canada. We work with employers actively hiring automotive technicians at all levels, from entry-level auto techs to ASE-certified master technicians. Our clients provide the opportunity—you choose the best fit. WHAT OUR CLIENTS OFFER Top Pay for Automotive Technicians and Auto Mechanics • Industry-leading compensation for service technicians, • Signing bonuses and performance-based incentives Modern Automotive Shops • Advanced diagnostic tools and equipment, • High-volume service departments, • Work on domestic, import, diesel, and electric vehicles Career Growth for Automotive Technicians • Paid training, including EV and diagnostic training, • ASE certification support, • Advancement to Master Technician and Shop Foreman rolesWHY WORK WITH CARGUYS INC., • Access to top automotive technician, auto mechanic, and service technician jobs, • Personalized job matching, • No cost to candidates — employers retain our services AUTOMOTIVE TECHNICIAN / AUTO MECHANIC RESPONSIBILITIES • Perform automotive repair and maintenance on engines, brakes, suspension, and drivability systems, • Diagnose mechanical and electrical issues using automotive diagnostic equipment, • Complete repairs to manufacturer specifications, • Perform vehicle inspections, diagnostics, and troubleshooting, • Handle warranty repairs, recall repairs, and dealership service work, • Maintain high-quality standards as an automotive technician or service technician AUTOMOTIVE TECHNICIAN / AUTO MECHANIC QUALIFICATIONS • Experience as an automotive technician, auto mechanic, service technician, or auto tech, • All experience levels considered, including entry-level technicians and master technicians, • Strong diagnostic, troubleshooting, and repair skills, • Personal tools required, • Valid driver’s license preferred AUTOMOTIVE TECHNICIAN SKILLS (AUTO MECHANIC / SERVICE TECHNICIAN) Automotive technician skills include automotive diagnostics, auto repair, and vehicle maintenance across gasoline and diesel engines, engine repair, engine performance, and tune-ups. Experience with automatic transmission, manual transmission, drivetrain and axle repair, suspension and steering systems, brake repair, electrical systems, and electronic diagnostics is required. Skilled in HVAC systems, vehicle troubleshooting, and advanced diagnostic scan tools. Experience performing automotive service technician duties in dealership service departments or independent repair shops, including warranty repair, recall repair, and vehicle inspections. ASE certification in engine repair, brakes, suspension, electrical systems, HVAC, and engine performance is strongly preferred. Keywords: automotive technician, auto mechanic, service technician, auto tech, master technician, ASE technician, automotive repair, automotive diagnostics, vehicle repair, dealership technician, repair technician HOW IT WORKS You are applying through CarGuys Inc., America’s and Canada’s #1 Automotive Recruiter. Automotive dealerships and repair facilities partner with us to hire automotive technicians and auto mechanics. If selected, your resume will be forwarded to a local employer. APPLY TODAY Apply now to connect with high-paying automotive technician, auto mechanic, and service technician opportunities. CARGUYS INC. America’s and Canada’s #1 Automotive Recruiter #ZR

Work with the Electrical Foreman, Construction Supervisor and the Branch Manager to allocate labor resources to service and warranty projects as needed Assist with training and development for Field Service Technicians and Field Communications Technicians. Lead regular meetings to align and train th

Job Description We are currently seeking an experienced Electrical Foreman to lead a team of over 10 workers in delivering safe and high-quality electrical systems for our customers. This role involves overseeing complex control system projects, ensuring adherence to safety standards, and providing hands-on leadership to the electrical team. The Electrical Foreman will report directly to the Project Manager and may occasionally travel locally to job sites. Responsibilities • Lead and supervise electrical installation and repair work, • Manage and troubleshoot complex control systems, • Install raceway, cable tray systems, and electrical fixtures, • Ensure compliance with quality assurance and safety codes, • Coordinate and provide guidance to a team of 10+ electricians, • Perform routine maintenance and troubleshooting on electrical wiring and systems, • Collaborate with project management and report progress regularly, • Foster a safe and efficient working environment Required Qualifications • 5+ years of experience in electrical work, including electrical installation, • Proficient in reading and interpreting blueprints and electrical schematics, • Strong troubleshooting, problem solving, and critical thinking abilities, • Demonstrated team leadership and supervision skills, • Thorough knowledge of safety compliance and quality control standards

Job Description We are currently seeking JOURNEYMAN & FOREMAN ELECTRICIANS We offer competitive pay & benefits Responsibilities: • Plan daily activities for crew of 2-6, • Forecast materials needed on site, • Layout of electrical systems, • Working foreman., • Troubleshooting electrical systems and commercial or industrial equipment operation. Typical hard skills • Install and repair electrical equipment and fixtures in commercial & industrial environments, • Conduit Bending 1/2" - 4", • Troubleshoot motors and motor control systems. Know how a motor starter works., • Perform routine maintenance on electrical wiring and systems. Torquing & thermal imaging., • Adhere to quality and safety codes & standards, • Work on fire alarm systems (training will be provided), • Install standby generators ranging from 11kW - 100kW, • Install EV Charging stations, • Document work on tablets. Qualifications: • Need 10 yrs experience minimum in commercial & industrial environments., • Can read plans and layout work., • Can operate scissor lifts, boom lifts & bucket trucks., • Operate the following tools; Torque wrench, coring drill, rotary hammers, band saws, wire puller, conduit bender, multi-meters, rotation meter. \nCompany Description Commercial & industrial electrical contracting. We perform all facets of electric work. Commercial & industrial electrical contracting. We perform all facets of electric work.

Job Description Are hardworking and self-motivated and are responsible, detailed oriented and have great communication skills. Able to work in indoor and outdoor environments, able to contend with onsite physical demands on the job site lifting, carrying, pulling, pushing of materials and equipment, climbing stairs and ladders. Need to be able to read and interpret blue prints Need to have knowledge of the NEC and NYC electrical codes Posses necessary tools of the trade and the knowledge on how to use them safely Preform trouble shooting and repairs of electrical systems Job Type: Full-time Experience: • Electrical Construction: 7 years (Required), • Electrical Foreman: 7 years (Required) License: • valid driver's license Job Type: Full-time

Job Description $35–$50/hour | Maryland | Regional Travel Pfister Energy, a leading commercial solar EPC with over 900 MW of completed projects, is hiring experienced Commercial Electricians, Journeymen, and Electrical Foremen to install and maintain electrical systems on large-scale solar projects. Bring your commercial electrical experience and grow your career in renewable energy with hands-on training, competitive pay, and advancement opportunities. What You'll Do • Install, wire, terminate, and test commercial solar PV electrical systems., • Work with AC/DC wiring, inverters, combiner boxes, disconnects, and electrical service equipment., • Install conduit and cable tray systems, including EMT, rigid, PVC, and associated supports., • Read electrical blueprints, one-line diagrams, and specifications., • Troubleshoot electrical systems and support testing and commissioning., • Follow NEC requirements, OSHA standards, and electrical safety procedures., • For lead/foreman positions: supervise crews, coordinate daily work, maintain quality, and mentor junior electricians. Who We're Looking For • 2+ years of commercial electrical construction experience required., • Hands-on experience installing conduit, cable trays, and electrical wiring., • Ability to read electrical drawings and follow NEC and electrical safety standards., • Valid driver's license and willingness to travel throughout Maryland and neighboring states., • Ability to work outdoors, at heights, and lift 50+ lbs., • Preferred: Solar PV experience, Journeyman Electrician license, OSHA 10/30, or electrical crew leadership experience. We Offer • $35–$50/hour, based on experience, • Prevailing wage opportunities, • Overtime opportunities, • Travel pay (when applicable), • Per diem (when applicable), • Lodging for eligible projects, • 401(k) with company matching, • Medical insurance, • Dental insurance, • Vision insurance, • Health Reimbursement Account (HRA), • Life insurance, • AD&D insurance, • Accident insurance, • Disability insurance, • Critical illness insurance, • Paid time off, • Paid holidays, • Company-provided PPE, • Company-provided tools and safety equipment, • Paid training and certification support, • Career advancement into Lead Electrician, Foreman, and Superintendent roles, • Employee referral bonuses Applicants must be authorized to work in the United States without current or future employment sponsorship. Apply Today! \nCompany Description Pfister Energy is a nationally recognized renewable energy company helping businesses control rising energy costs through turnkey onsite energy solutions. Since 2005, we’ve developed, designed, financed, and installed more than 900 MW of clean energy systems for commercial and industrial clients. Our expertise includes solar, storage, microgrids, EV charging, O&M, and asset lifecycle services. Known for trusted expertise and efficient execution, we deliver future-ready solutions that strengthen resilience, reduce costs, and support long-term sustainability goals. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local law. Pfister Energy is a nationally recognized renewable energy company helping businesses control rising energy costs through turnkey onsite energy solutions. Since 2005, we’ve developed, designed, financed, and installed more than 900 MW of clean energy systems for commercial and industrial clients. Our expertise includes solar, storage, microgrids, EV charging, O&M, and asset lifecycle services. Known for trusted expertise and efficient execution, we deliver future-ready solutions that strengthen resilience, reduce costs, and support long-term sustainability goals.\r\n\r\n\r\nWe are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local law.

Job Description PLEASE DO NOT APPLY WITHOUT REQUIRED EXPERIENCE DRP Electric is seeking journeymen electricians with 7+ years of experience in commercial & residential new construction & service work, troubleshooting service calls, alterations, upgrades, etc for full time employment. Our work is primarily throughout Staten Island. Please do not apply if you have less than 7 years of experience. DRP is not currently seeking apprentice level electricians.

We are recruiting an experienced CNC Swiss Machinist / CNC Shop Manager for a growing precision machining company. This is a highly hands-on shop-floor leadership position for someone who can combine CNC Swiss machining expertise with day-to-day production leadership. The successful candidate will spend the majority of the day in the shop, working directly with machines and employees—not managing operations from an office. We are particularly interested in an experienced Swiss machinist, lead machinist, shop foreman, manufacturing supervisor, or shop manager who is comfortable setting up and operating equipment, troubleshooting machining issues, and keeping a high-mix production environment moving. CNC programming capability is highly desired. What You’ll Do: • Lead day-to-day machine shop operations while remaining actively involved on the production floor, • Set up and operate CNC Swiss screw machines to support production requirements, • Review drawings, specifications, tolerances, and job requirements before production, • Coordinate daily production schedules, machine assignments, manpower, materials, and job priorities, • Support frequent setups, short production runs, custom work, rush jobs, and changing customer requirements, • Troubleshoot machining, tooling, setup, quality, and production issues, • Program or modify CNC programs when needed, depending on experience, • Work with tooling, speeds and feeds, workholding, and machining processes to improve performance, • Perform and support first-article and in-process inspection using precision measuring equipment, • Ensure finished components meet print, tolerance, and quality requirements, • Monitor machine utilization, setup and cycle times, labor efficiency, scrap, rework, and overall shop productivity, • Identify bottlenecks and adjust production priorities to keep work flowing, • Coordinate preventive maintenance and equipment repairs to minimize downtime, • Train, develop, and provide day-to-day direction to machinists, operators, and other shop employees, • Drive improvements in setup time, cycle time, quality, throughput, and overall manufacturing efficiency Preferred Background: • Strong hands-on experience with CNC Swiss screw machining, • Experience setting up and operating Swiss-style CNC equipment, • Ability to program CNC equipment is highly desired, • Experience with CAM-based and CNC Swiss machining environments, • Strong understanding of CNC machine tools, Swiss machining processes, tooling, workholding, feeds and speeds, and machine setup, • Ability to read and interpret engineering drawings, GD&T, dimensions, tolerances, and manufacturing specifications, • Skilled with micrometers, gauges, and other precision inspection and measuring equipment, • Experience troubleshooting machining problems and refining setups and processes, • Background in a high-mix, low-volume or job-shop manufacturing environment with frequent setups is strongly preferred, • Previous experience as a Lead Machinist, Shop Foreman, Manufacturing Supervisor, Production Manager, or hands-on Shop Manager is beneficial, • Experience scheduling and prioritizing multiple jobs across machines and production resources, • Understanding of estimated versus actual machining hours, production efficiency, scrap, and job costs, • Experience machining small-diameter precision components is valuable, • Plastics machining experience is preferred but not required, • Strong shop-floor leadership and the ability to work directly alongside the production team Compensation & Benefits: • $80,000–$140,000 base salary, based on experience and technical capabilities, • Medical benefits, • 401(k) with employer matching, • Paid time off and company holidays, • Discretionary bonus opportunity, • Full-time, stable employment, • Opportunity for continued professional growth This opportunity is particularly well suited to someone who has developed strong CNC Swiss machining skills and is ready to combine those capabilities with broader responsibility for people, production, quality, scheduling, and overall shop performance. If you are a hands-on machining professional who enjoys solving problems on the shop floor and leading by example, we would welcome the opportunity to speak with you.

Job Description This is a high-priority opening as the team prepares to transition from Accubid Classic to Accubid Anywhere and is looking to onboard someone before the migration begins. We are seeking an experienced Electrical Estimator to support a variety of electrical construction projects, including mission-critical data centers, healthcare facilities, commercial, industrial, and utility infrastructure projects. The ideal candidate is detail-oriented, collaborative, and capable of managing multiple estimates ranging from $5M to $25M+. Key Responsibilities Prepare detailed electrical construction estimates and budgets. Review plans, specifications, addenda, and bid documents. Perform material and labor takeoffs. Solicit and evaluate vendor and subcontractor pricing. Develop labor, equipment, and cost projections. Coordinate with project management and operations teams. Identify value engineering and cost-saving opportunities. Support conceptual budgeting, design-build proposals, and change orders. Attend pre-bid meetings and site visits as needed. Maintain estimating schedules and track bid opportunities. Required Skills & Experience Electrical estimating experience required. Experience estimating projects valued between $5M and $25M+. Mission-critical/data center or healthcare experience preferred. Commercial and industrial electrical estimating experience will also be considered. Strong knowledge of electrical systems, construction methods, and contract documents. Ability to manage multiple estimates and deadlines simultaneously. Strong communication, teamwork, and ownership mentality. Nice to Have Skills & Experience 5-10 years of electrical estimating experience preferred. Field experience as an electrician, foreman, superintendent, or project engineer is a plus. Associate degree in Engineering, Construction Management, or a related field preferred. Valid driver's license and ability to travel to project sites as needed. Compensation: Ranges from $130,000 - $150,000 a year annual salary. Bonus opportunities are available. Exact compensation may vary based on several factors, including skills, experience, and education. Benefit packages for this role include: Benefit packages for this role may include healthcare insurance offerings and paid leave as provided by applicable law.

Job Title - Facade Superintendent Location - Brooklyn, NY Major Ground-Up Residential Development Salary up to $175,000 Insight Executive Solutions is partnering with an established New York City general contractor to recruit an experienced Facade / Exterior Superintendent for a significant ground-up residential development in Brooklyn. The project involves the construction of a high-rise residential tower featuring 200+ rental units, ground-floor retail space, and a contemporary architectural façade incorporating extensive glazing and exterior panel systems. This is an excellent opportunity for a Superintendent with strong building envelope experience to take ownership of exterior construction activities on a large-scale, architecturally driven project. Key Responsibilities • Oversee and coordinate all façade and exterior construction activities, ensuring work is delivered safely, on schedule, and to the required quality standards., • Manage façade subcontractors, suppliers, and installation crews throughout the exterior construction process., • Coordinate the installation of exterior wall systems, architectural panels, windows, glazing, waterproofing, and associated building envelope components., • Review construction drawings, shop drawings, and technical specifications to identify and resolve potential conflicts., • Work closely with project management, consultants, and other trades to maintain coordination and avoid delays., • Conduct regular inspections to ensure compliance with project specifications, quality standards, and applicable NYC building codes., • Monitor daily progress, address site issues, and maintain accountability across subcontractors., • Enforce site safety procedures and maintain high standards of workmanship throughout the project. Candidate Requirements • Proven experience as a Superintendent or Foreman overseeing façade, exterior, or building envelope packages on new construction projects in New York, • Strong technical knowledge of façade systems, curtain wall, glazing, exterior cladding, waterproofing, and window installation., • Experience working on high-rise residential, mixed-use, or other large-scale ground-up construction projects., • Demonstrated ability to coordinate multiple subcontractors and manage complex exterior construction sequences., • Strong understanding of construction drawings, scheduling, quality control, and site safety., • NYC construction experience needed.

Job description: Belleville, NJ | Full-time | On-site | $50 to $60 per hour | 4x10 schedule, Monday to Thursday Are you the machinist everyone on the floor comes to with questions? Our client, an established CNC machine shop in Belleville, is hiring a Shop Foreman to run the production floor. You'll lead the people, own the setups and programs, and keep the machines running, all while working a four-day week. Why this job • $50 to $60 per hour, plus a year-end retention bonus of about 10% of base pay, • Three-day weekends every week: 4x10s, Monday to Thursday, 6:00 a.m. to 4:30 p.m., • Real authority over the floor: you set the daily schedule and develop your team, • Health, dental, and vision insurance, plus a 401(k) with company match, • 18 days off in year one, rising to 23 days after your first year What you'll do • Set the daily schedule: which jobs run on which machines, in what order, and who runs them, • Adjust the plan for breakdowns, late material, rework, and absences, and keep the Operations Manager informed, • Train and develop machinists from Base to Proficient to Advanced to Journeyman, • Give direct, timely feedback and follow up so the same mistake doesn't happen twice, • Write and prove CAM programs from print or model, including toolpaths, feeds, speeds, and post-processing, • Handle first-run jobs, fixture design, and production problem-solving, • Write, review, and correct setup sheets and programs so repeat jobs run right every time, • Support quoting with routing, cycle time estimates, tooling needs, and feasibility, • Own maintenance for all machines, shop equipment, and the building, • Enforce safety on the floor, including PPE, guarding, lockout, and new-hire safety orientation What you need • 8+ years of CNC experience at a journeyman level, including first-run setups on mills and lathes, • Full CAD/CAM capability: you can build a program from a print with no reference set, • GD&T, blueprint reading, and inspection tools, • Speeds and feeds across brass, aluminum, and stainless, • Experience leading or training other machinists, • Mechanical and maintenance aptitude on production equipment, • Ability to lift 50 lbs regularly You'll fit right in if you • Teach the why, not just the how, and share what you know freely, • Hold people accountable directly instead of passing conflict up the chain, • Change your mind when the facts change, • Want the shop's output and quality to visibly improve on your watch Schedule details Monday to Thursday, 6:00 a.m. to 4:30 p.m., on the floor. Occasional after-hours or weekend work for overtime, maintenance, breakdowns, or deliveries.

Assistant Project Manager (Electrical Construction) South Plainfield, NJ (In-Person) McPhee Electric, a Phalcon Company is a high-performance electrical contractor known for delivering complex, fast-paced projects with precision, accountability, and strong field leadership. We don’t just manage projects—we execute them with discipline, speed, and quality. We’re looking for an Assistant Project Manager (APM) who wants real responsibility, field exposure, and a clear path to becoming a Project Manager. If you’re detail-oriented, driven, and ready to grow in a company that values quality and safety, this is the opportunity. What You’ll Do Project Execution & Coordination • Support the successful delivery of electrical construction projects from kickoff through closeout, • Work closely with Project Managers, field teams, subcontractors, and vendors to keep projects moving forward, • Act as a key link between the field and office—resolving issues quickly and keeping communication tight, • Track job progress, productivity, and performance against budget and schedule Project Controls & Cost Awareness • Maintain RFIs, submittals, change orders, and contract documentation, • Track procurement, material deliveries, and equipment usage, • Support cost tracking, billing, and financial reporting, • Help ensure accurate project data to keep jobs on track financially Change Management & Reporting • Identify scope changes and support pricing, documentation, and client submission, • Assist with budget vs. actual reporting, commitments, and cost forecasting, • Prepare meeting notes, project updates, and internal/external communications Scheduling & Performance Tracking • Help build and maintain project schedules (engineering, procurement, construction), • Monitor progress and flag risks that could impact deadlines or productivity Quality & Safety • Support a strong safety-first culture across all projects, • Ensure work aligns with quality standards, contract documents, and company expectations Client & Team Collaboration • Build professional relationships with clients, vendors, and field teams, • Support a team-oriented environment focused on accountability, execution, and results Project Closeout • Assist with turnover documentation, as-builts, and closeout packages, • Maintain accurate logs and final project records What We’re Looking ForExperience • 2–3 years of experience in construction project support or coordination, • Electrical construction experience strongly preferred, • Field experience (foreman or similar role) is a plus Education • Bachelor’s degree in Construction Management, Engineering, or related field, • OR equivalent hands-on field/project experience Skills • Highly organized with the ability to manage multiple priorities, • Strong communicator—clear, direct, and professional, • Solid understanding of construction workflows, scheduling, and cost tracking, • Proficient in Microsoft Office; experience with Procore, Bluebeam, or similar tools is a plus, • Problem-solver who anticipates issues and takes initiative Career Growth At McPhee- A Phalcon Company, this isn’t a support-only role. You’ll gain real world experience, exposure, and responsibility needed to grow into a Project Manager. We promote from within and invest in people who take ownership and deliver results. Work Environment • Mix of office and active construction site work, • Hands-on collaboration with field teams and leadership Location Requirement Must be able to work onsite in South Plainfield, NJ - full time (40 hours) Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Vision insurance Job Type: Full-time Compensation Package: • Pay: $65,000.00 - $100,000.00 per year Education: • Bachelor's, • Field Experience as a electrician or lineman Experience: • Assistant Project Management: 2 years (Required), • Electrical or Related Construction: 2 years (Required), • Electrical Field Foreman: 2 years (Required) Ability to Commute: • South Plainfield, NJ 07080 (Required) Ability to Relocate: • South Plainfield, NJ 07080: Relocate before starting work (Required) Work Location: In person

Job Description Electrical Project Manager– Drive High-Impact Public Agency Infrastructure in New York Job Overview • Company: RMD Electric Corp., • Salary/Pay Rate: $100,000 - $150,000 per year (plus Annual Bonus potential), • Location: Uniondale, NY (Projects across 5 Boroughs & Long Island), • Job/Employment Type: Full Time, • Project Scope: Industrial, Government and Federal (Public Agencies including MTA & SCA), • Mandatory Licenses & Certifications: Driver’s License The Opportunity You will take total ownership of complex, large-scale electrical infrastructure projects across New York City and Long Island for major public agencies like the MTA and SCA. Working alongside an agile and supportive team, you will ensure high-profile projects are delivered safely, on time, and within budget while driving technical integrity. This role offers you direct control over vital city infrastructure projects while accelerating your own career in an energetic, growth-focused environment. How You Will Make an Impact • Manage full lifecycle project execution, from bidding document review to project closeout, ensuring strict compliance with technical specifications and safety standards., • Lead and collaborate with project teams, prime contractors, electrical foreman, architects, and engineers to maintain unified project direction., • Monitor job costs, execute detailed Job Cost Projections, and manage the operations of our cost control system to protect project profitability., • Process, manage, and inspect material deliveries, verifying all components meet quality control standards and strict contract submittals., • Formulate and update dynamic project schedules, anticipating milestone targets and removing operational bottlenecks proactively., • Oversee change order estimates, requests for information (RFIs), and monthly pay estimates to ensure accurate financial reporting and workflow., • Maintain complete document control across all project submittals, transmittals, and progress reports to assure audit readiness and operational transparency. Required Qualifications & Experience • Bachelor's degree in Electrical Engineering, Construction Management, or a related field., • 5+ years of experience managing complex electrical construction projects., • Deep technical comprehension of industrial and commercial electrical systems., • Strong proficiency in managing project budgets, job cost analysis, scheduling, and value engineering processes., • Advanced computer skills using Microsoft Office Suite, with an emphasis on Microsoft Excel, Word, Outlook, and ProCore., • Demonstrated ability to coordinate directly with field superintendents, general foramen, and prime contractors., • The A+ candidate should be someone who is both technically savvy with an engineering background AND has direct experience with public agencies like MTA/SCA. the ideal candidate should know how to read drawings and truly understands how to build the jobs, not just the financial side. Preferred Qualifications & Experience • Background managing electrical projects and workforce dynamics., • Direct technical experience managing transit-specific electrical infrastructure., • Proven experience executing projects with public agencies (e.g., Metropolitan Transit Authority, School Construction Authority). Compensation & Benefits • Competitive annual salary with performance-based discretionary bonus potential., • Weekly pay cycle., • 401(k) Retirement Savings Program with generous employer matching., • Fully-covered, comprehensive Medical, Dental, and Vision coverage., • Generous Paid Time Off (PTO) covering holidays, vacation days, and sick leave., • Paid Parental Leave for both maternity and paternity needs., • Paid technical training and certifications (OSHA, Fall Protection, Lifts, and Manufacturer training)., • Structured internal mentor training and clear professional growth paths., • Dynamic company events and annual team trips. About Us RMD Electric Corp. is a premier electrical contractor with over 15 years of excellence serving New York City and Long Island. We specialize in industrial, government federal, and union projects, delivering top-tier electrical and controls work built on safety, transparency, and high ethical standards. Learn more about our vision and culture at https://rmdelectriccorpny.com/. RMD Electric Corp. is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors.

Job Description Are you a proven leader who takes ownership of the jobsite and sets the standard for excellence? At Groundworks, North America’s leader in foundation solutions, our Foremen lead the installation crew from start to finish—owning safety, quality, productivity, and team performance on every project. You’ll coordinate daily operations, mentor and develop your crew, and ensure every installation reflects our commitment to protecting our customers’ homes. Supported by an award-winning brand, industry‑leading systems, and a culture that promotes from within, this role is built for leaders who want responsibility, respect, and long‑term career growth. The Foreman provides leadership to their crew and is an integral part of our success. The Foreman coordinates tasks and assignments based on work priority, schedules, objectives, and workforce availability. The Foreman monitors the progress of a project and keeps it on track from a time and budgetary standpoint. Candidates with experience in foundation repair, crawl space encapsulation, basement waterproofing, and concrete lifting solutions, and team leadership experience would be a great fit for this position. Duties and Responsibilities • Leads a high-performance team serving customers in a local market/area., • Reviews job specifications to determine materials, tools, and equipment needed prior to reporting to the job site., • Assesses conditions of the job once on-site; sets forth plans based on time allotment, tools needed, and order of work – assign duties to your crew for work to be performed., • Installs products and services with the support of a national team of trained professionals., • Innovates and troubleshoots situations as needed based on requirements to complete the job to meet company standards and timetables., • Provides customers with superior quality and service while onsite performing work., • Ensures all final documentation is done completely/accurately and is given to the proper parties., • Supervises the crew and provides on-the-job training to Installers and Co-Foreman, • Drives the company-provided vehicle to and from the job site daily., • It is an essential function of this job that the employee regularly and reliably reports to work on time each working day. Qualifications • Strong communication skills, ability to motivate, and be a team player., • Experience leading crews or small teams, • Basic construction or mechanical knowledge, • Must have a valid, non-restrictive driver’s license., • Enters crawl spaces and other confined areas, • Other duties as assigned by the supervisor Working Conditions • The position lifts heavy objects and/or up to 50 lbs., walks and stands for long periods of time and performs strenuous physical labor., • The employee lifts, pushes, pulls or carries objects; uses abdominal and lower back muscles to provide support over time without fatigue; and effectively lifts and carries heavy loads., • The position requires good manual dexterity (hand, hand and arm, two hands) and multi-limb coordination. It also requires the ability to quickly move arms and legs., • The employee must have excellent stamina., • Seeing with the ability to read reports, data, statistics and information on computer screens are required. What We Offer: • Competitive base pay + bonus paid per job ($92K avg.), • Best-in-class certification program creates path to real career growth, • Tools & transportation to the job site provided, • Free pair of Red Wing Boots provided every year, • Performance opens doors to elite recognition, trips & events, • Annual Tribe Appreciation Tour, holiday & volunteer events, • Upward mobility - we promote from within 80% of the time, • When you win, you own it—our Employee Ownership Program lets you share the upside, • Tuition Reimbursement Program - we invest in your development!, • Work-life balance - 2 weeks PTO and 6 paid holidays, • US: Affordable and comprehensive benefits package including medical, dental, vision, long & short-term disability, company-paid life insurance, 401(k) and company match & paid maternity leave, • Canada: Affordable and comprehensive benefits package including medical, dental, long & short-term disability, and company paid life insurance \nCompany Description Our Tribe As the nation’s largest privately held foundation services company, we do things differently than the typical contractor. We live up to our word and the exceptional service our customers have come to expect from us. It’s the Groundworks difference. Our strength does not lie in our numbers, but in our people and their experience and expertise. We are a nationwide family of visionaries who put our customers first and set out to accomplish what no other foundation repair company has ever accomplished before. Today, with more than 5000 employees in 61 locations, Groundworks is the nation’s leading and fastest-growing foundation services company. The combined companies have helped over 1 million homeowners protect and repair their most valuable asset, their home. Our Tribe\r\n\r\nAs the nation’s largest privately held foundation services company, we do things differently than the typical contractor. We live up to our word and the exceptional service our customers have come to expect from us. It’s the Groundworks difference.\r\n\r\nOur strength does not lie in our numbers, but in our people and their experience and expertise. We are a nationwide family of visionaries who put our customers first and set out to accomplish what no other foundation repair company has ever accomplished before.\r\n\r\nToday, with more than 5000 employees in 61 locations, Groundworks is the nation’s leading and fastest-growing foundation services company. The combined companies have helped over 1 million homeowners protect and repair their most valuable asset, their home.

Job Description Preview High-volume, family-owned Toyota dealership in Wood-Ridge, NJ seeking an experienced Shop Foreman to lead technician productivity, diagnostics, and development in a modern service operation. About the Dealership We are a family-owned Toyota dealership located in Wood-Ridge, NJ, operating a high-volume service department with approximately 1,500 customer-pay repair orders per month, plus warranty work. We are expanding into a new, state-of-the-art service facility and investing heavily in people, process, and technology. Our shop is staffed with factory-trained and certified technicians, and we are committed to raising efficiency, diagnostic accuracy, and overall technician performance. Position Overview The Shop Foreman / Technical Lead role is designed for an experienced, senior-level technician who is ready to move into a leadership position and focus on guiding, mentoring, and improving the performance of the entire shop. This role is not a full-time wrench-turning position. While hands-on diagnostic assistance may be required when needed, the primary focus is on technical leadership, productivity, accountability, and technician development. Key Responsibilities Technical Leadership & Diagnostics • Serve as the top technical resource for complex diagnostic concerns, • Assist technicians with advanced diagnostic strategy and problem-solving, • Ensure all repairs meet Toyota factory standards and quality expectations Productivity & Efficiency • Monitor technician productivity, efficiency, and workflow, • Identify opportunities to improve shop throughput and utilization, • Work with service management to support fair dispatching and job flow Training, Mentorship & Certification • Mentor and coach technicians to improve skill level and confidence, • Support ASE and Toyota certification advancement, • Help elevate technicians toward expert-level capability Accountability & Quality Control • Hold technicians accountable for proper diagnostic processes and repair quality, • Review comebacks and repeat repairs; implement corrective coaching, • Promote professionalism, consistency, and pride in workmanship Who This Role Is For • Senior or Master-level technicians ready to step into leadership, • Experienced technicians who want to reduce physical wrench-turning, • Professionals who enjoy teaching, coaching, and improving others, • Leaders who command respect through knowledge, not ego Qualifications & Experience • Extensive automotive technician experience (Toyota experience strongly preferred), • Toyota Master Certification strongly preferred, • ASE Master Certification preferred, • Advanced diagnostic expertise, • Proven ability to mentor, coach, and influence other technicians, • Strong communication and leadership skills Compensation & Opportunity • Competitive annual compensation of approximately $90,000–$130,000+, based on experience, certifications, and leadership impact, • Compensation structure may include salary or salary + performance incentives, • Stable, full-time leadership role, • Paid training and continued education, • Opportunity to directly impact shop performance, technician growth, and culture (Compensation will be aligned with experience and the scope of leadership responsibility.) Why Join Us • Family-owned dealership with hands-on leadership, • Brand-new, modern service facility, • High-volume Toyota service department, • Strong commitment to technician training and advancement, • Opportunity to shape shop culture, performance, and long-term success Experienced technicians interested in transitioning into a leadership role focused on developing people and improving shop performance are encouraged to apply.

Job DescriptionBenefits: • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Paid time off, • Vision insurance We are seeking Shop Foreman to join our team! You will manage and maintain our machine a repair shop. Responsibilities: Manage jobs and employees. • Repair, install, and adjust industrial machinery and pipeline distribution systems, • Troubleshoot and repair defective equipment, • Perform routine preventative maintenance, • Respond to work order requests in a timely fashion, • Adhere to all safety policies and proceduresQualifications: SHOP FOREMAN EXPERIENCE REQUIRED PUMP MECHANIC EXPERINCE PREFERRED • Previous experience in machinery or other related fields, • Strong mechanical aptitude and troubleshooting skills, • Familiarity with industrial tools and equipment, • Ability to handle physical workload

Job DescriptionAbout Sets & Effects Sets and Effects is a custom fabrication shop specializing in scenic environments, props, displays, and installations for the entertainment, fashion, retail, and experiential event industries. Our work spans a wide range of projects, from intricate custom props and retail displays to large-scale scenic builds and immersive environments. We combine traditional craftsmanship with modern fabrication techniques to bring ambitious and often unconventional designs to life. We pride ourselves on the quality of our work, our creative problem-solving, and our ability to tackle complex projects under demanding deadlines. Our shop is a collaborative, fast-paced environment where no two projects are quite the same. We are preparing to move into a new, larger fabrication facility, marking an exciting next chapter for our company. We're looking for a Shop Foreman who can play a key role in this transition, helping plan and implement an efficient shop floor layout, organize equipment and work areas, and establish workflows that maximize productivity and support our continued growth. This is an opportunity for an experienced fabrication professional to help shape the future of our shop while leading a talented team and maintaining the high standards of craftsmanship our clients expect. Job Overview Sets and Effects is seeking an experienced Shop Foreman who shares our commitment to craftsmanship to oversee day-to-day production in our busy scenic and event fabrication shop. The ideal candidate is a highly skilled fabricator with strong leadership abilities, excellent organizational skills, and extensive experience in custom fabrication. This is a hands-on leadership position requiring someone who can manage shop personnel, coordinate multiple projects, troubleshoot fabrication challenges, and ensure that work is completed efficiently, safely, and to our high standards of quality. Our shop produces custom scenic elements, props, displays, and installations for events, fashion, retail, and experiential productions. Projects are varied, often complex, and typically operate on tight deadlines. Key Responsibilities Oversee daily shop operations, workflow, and production schedules. Supervise and coordinate with carpenters, fabricators, scenic artists, and other shop personnel. Work closely with project managers to plan fabrication approaches, establish priorities, and allocate labor and resources. Review technical drawings and designs to determine efficient construction methods. Provide hands-on fabrication expertise, guidance, and problem-solving throughout the production process. Monitor progress across multiple simultaneous projects, identifying potential delays or issues before they become problems. Maintain high standards of craftsmanship, quality control, and attention to detail. Ensure safe use of tools, machinery, and equipment and maintain an organized, efficient workspace. Assist with material planning, inventory management, and shop logistics. Help establish and improve shop processes to maximize productivity and minimize waste. Play an active role in planning and executing our move to a larger facility, including shop floor layout, equipment placement, workflow optimization, and the organization of production areas to create a safe, efficient, and highly functional fabrication shop. Qualifications Extensive professional experience in scenic fabrication, custom carpentry, set construction, or a related field. Strong knowledge of woodworking, construction methods, fabrication materials, and shop machinery. Proven experience supervising and coordinating fabrication crews. Ability to read and interpret technical drawings and construction plans. Excellent organizational, communication, and time-management skills. Ability to prioritize tasks and manage multiple projects under tight deadlines. Strong problem-solving skills and the ability to develop practical fabrication solutions. Comfortable working in a fast-paced, constantly changing production environment. Experience with CNC fabrication, metalworking, finishing, and other specialty fabrication techniques is a plus. Ideal Candidate We're looking for someone who takes ownership of the shop floor, leads by example, and knows how to get things built. Someone who can balance hands-on craftsmanship with the bigger picture of keeping an entire shop running smoothly. The right person will be proactive, resourceful, decisive, and capable of earning the respect of an experienced fabrication team. Compensation & Schedule Hourly Rate: 42–48, commensurate with experience and qualifications. Schedule: Generally 40–45 hours per week. Overtime: Occasional overtime and weekend availability required based on production schedules. Overtime paid in accordance with applicable law. To Apply Please send your resume and a brief description of your relevant fabrication and supervisory experience to cwj@setsandeffects.com.

Job Description SUMMARY Ensures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction. ESSENTIAL DUTIES include the following. Other duties may be assigned. Recruits, and motivates qualified service technicians. Assists technicians in developing their skills. Understands, keeps abreast of, and complies with federal, state, and local regulations that affect service operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Understands and ensures compliance with manufacturer warranty and policy procedures. Ensures that all department employees receive appropriate manufacturer training. Conducts regular performance reviews for all technicians in accordance with dealership guidelines. Test drives the vehicle with customer as needed to confirm the problem or refers to test technician. Prioritizes and controls all comebacks to ensure proper and prompt attention. Ensures that all repairs are assigned to technicians in an equal and fair manner. Provides technical support for technicians when necessary. Ensures repairs are charged out correctly. Checks progress of each repair order throughout the day. Maintains high-quality service repairs and minimize comebacks. Conducts periodic spot checks of completed jobs for thoroughness and quality. Road tests vehicles to quality-check work performed. Accounts for all documents; ensures that none are missing and all are processed correctly. Establishes and maintains customer follow-up program to confirm satisfaction with the service experience. Handles all customer complaints within 24 hours, informing other managers as appropriate. Manages department performance using tools such as the daily operating control (DOC), efficiency and productivity control, comeback reports, warranty reports, telephone surveys, and monthly forecasts. Monitors technicians' daily productivity reports and corresponding payroll records. Monitors shop condition, including cleanliness, safety, and the condition of shop equipment. Reports problems to the service manager or dealer. Ensures the proper care, storage, and inventory of special tools. Prepares a list of needed service department equipment, supplies and required repairs, and reviews with the service manager as needed. Keeps abreast of new equipment and tools available and recommends purchases. Fills in for service advisor and dispatcher when necessary. Attends managers meetings as requested. Strives for harmony and teamwork within the department and with all other departments. Maintains safe work environment. Maintains professional appearance. SUPERVISORY RESPONSIBILITIES Shop technicians QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE 10 years shop experience Customer satisfaction experience LANGUAGE SKILLS English CERTIFICATES, LICENSES, REGISTRATIONS State Inspection License Commercial Drivers License PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to perform repairs when necessary. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Description At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business. Leidos is seeking Distribution Engineers & Designers in New Jersey who are passionate about electric utility design engineering. We’re looking for someone who is dedicated to ensuring that every project, no matter how simple or complex, is of exceptional quality. You'll be working directly with clients to make sure that Leidos' reputation for high-quality work is always maintained. If you join us in this role, you'll gain expertise in a variety of areas, including NESC, Structural Pole Modeling, Electrical Power Calculations, GIS design training, Field Data Collection, and Client Design Standards. Your greatest work is ahead! Travel: This position has remote-working capabilities, but candidates must be located within a commutable distance of our New Jersey support areas in order to be considered, so we can provide support to our local utility customer as needed. The selected candidate(s) will be expected to be available for in-person meetings and assignments throughout the customer territory in New Jersey on an as-needed basis. As a Distribution Engineer / Designer, you can expect to: Independently develop design and construction work packages for electrical overhead and underground distribution systems for Leidos electric utility customers Review work provided by Client and assess requirements of scopes. Perform engineering calculations such as: structural analysis for wood pole loading, guying calculations, specifying conductor sags and tensions for recommended spans, and calculation of voltage drop and flicker. Provide engineering support during construction, including post-construction reviews to ensure all applicable engineering and construction standards have been met. Conduct root cause analysis of outages and mitigation using engineering principles and design Gain experience in coordinating conflicting utilities and other field engineering design requirements, assessing and developing large design packages for complex cable/conduit projects in dense urban environments, work permit development, easements, and ROW applications What Sets You Apart (Background Requirements): 2+ years of prior relevant experience is required. Bachelor's Degree (Electrical, Mechanical, Civil, or Industrial preferred); additional relevant experience/certifications may be considered in lieu of bachelor's degree Experience with the execution of distribution projects from kickoff through design approved, including Customer interaction and Process documentation Experience with utility reliability projects Ability to demonstrate proficiency with the NESC Ability to utilize a personal vehicle, as some customer-related travel could be anticipated (Job-related travel will be reimbursed at IRS-approved rates) Willingness to perform both field and office work; Ability to work in outdoor environments on occasion; The role may require customer-site visits to collect field data that will assist in developing work packages Candidates should possess valid U.S. driver's license, as some local or regional travel is expected Nice to Haves: Previous QAQC experience Experience providing estimated costs, development of a BOM, calculating the CIAC Experience with design tools such as Pole Foreman, O-Calc, Spida-Calc Experience with the Work Management System CREWS Relevant management or leadership experience Professional Attributes that will help you succeed in this role: Strong communication skills, written and interpersonal communications skills and supporting of customer advocacy Collaborative and inclusive of individuals of diverse backgrounds and geographic locations Positive attitude Ability to work with limited supervision Professional dress and demeanor Attention to detail & Highly organized Excellent time management At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including Professional Engineer License (PE), Project Management Professional (PMP), Leadership training, Formal Mentorship Programs, Management opportunities. PDSDLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. September 3, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $59,150.00 - $106,925.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit _. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at _. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at _. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the _. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

Description At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business. Leidos is seeking Distribution Engineers & Designers in New Jersey who are passionate about electric utility design engineering. We’re looking for someone who is dedicated to ensuring that every project, no matter how simple or complex, is of exceptional quality. You'll be working directly with clients to make sure that Leidos' reputation for high-quality work is always maintained. If you join us in this role, you'll gain expertise in a variety of areas, including NESC, Structural Pole Modeling, Electrical Power Calculations, GIS design training, Field Data Collection, and Client Design Standards. Your greatest work is ahead! Travel: This position has remote-working capabilities, but candidates must be located within a commutable distance of our New Jersey support areas in order to be considered, so we can provide support to our local utility customer as needed. The selected candidate(s) will be expected to be available for in-person meetings and assignments throughout the customer territory in New Jersey on an as-needed basis. As a Distribution Engineer / Designer, you can expect to: Independently develop design and construction work packages for electrical overhead and underground distribution systems for Leidos electric utility customers Review work provided by Client and assess requirements of scopes. Perform engineering calculations such as: structural analysis for wood pole loading, guying calculations, specifying conductor sags and tensions for recommended spans, and calculation of voltage drop and flicker. Provide engineering support during construction, including post-construction reviews to ensure all applicable engineering and construction standards have been met. Conduct root cause analysis of outages and mitigation using engineering principles and design Gain experience in coordinating conflicting utilities and other field engineering design requirements, assessing and developing large design packages for complex cable/conduit projects in dense urban environments, work permit development, easements, and ROW applications What Sets You Apart (Background Requirements): 2+ years of prior relevant experience is required. Bachelor's Degree (Electrical, Mechanical, Civil, or Industrial preferred); additional relevant experience/certifications may be considered in lieu of bachelor's degree Experience with the execution of distribution projects from kickoff through design approved, including Customer interaction and Process documentation Experience with utility reliability projects Ability to demonstrate proficiency with the NESC Ability to utilize a personal vehicle, as some customer-related travel could be anticipated (Job-related travel will be reimbursed at IRS-approved rates) Willingness to perform both field and office work; Ability to work in outdoor environments on occasion; The role may require customer-site visits to collect field data that will assist in developing work packages Candidates should possess valid U.S. driver's license, as some local or regional travel is expected Nice to Haves: Previous QAQC experience Experience providing estimated costs, development of a BOM, calculating the CIAC Experience with design tools such as Pole Foreman, O-Calc, Spida-Calc Experience with the Work Management System CREWS Relevant management or leadership experience Professional Attributes that will help you succeed in this role: Strong communication skills, written and interpersonal communications skills and supporting of customer advocacy Collaborative and inclusive of individuals of diverse backgrounds and geographic locations Positive attitude Ability to work with limited supervision Professional dress and demeanor Attention to detail & Highly organized Excellent time management At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including Professional Engineer License (PE), Project Management Professional (PMP), Leadership training, Formal Mentorship Programs, Management opportunities. PDSDLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. September 3, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $59,150.00 - $106,925.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit _. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at _. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at _. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the _. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

Position Overview Fab-Tech Steel Group is seeking an experienced Miscellaneous Steel Shop Foreman to oversee projects from initial planning and field measurement through fabrication, finishing, delivery, and installation. The ideal candidate will have strong experience in miscellaneous steel fabrication, shop supervision, field coordination, and project tracking. Responsibilities • Manage miscellaneous steel projects from inception through installation., • Review architectural, structural, and approved shop drawings., • Complete site visits and accurately take field measurements., • Coordinate measurements and project information with in-house detailers for shop drawings and piece details., • Review fabrication drawings for accuracy and constructability., • Prepare material takeoffs and order steel, hardware, supplies, and finishing materials., • Schedule, assign, and supervise daily shop labor., • Ensure employees work safely, efficiently, and according to project schedules., • Track fabrication progress and adjust priorities as needed., • Perform quality-control inspections on dimensions, welds, fit-up, hardware, and finishes., • Coordinate galvanizing, powder coating, painting, deliveries, and installation activities., • Maintain project schedules, production trackers, material logs, and punch lists., • Identify and resolve material shortages, fabrication issues, field conflicts, and scheduling delays., • Maintain a safe, clean, and organized fabrication shop., • Provide regular project updates to company management. Qualifications • Minimum of 5 years of experience in miscellaneous steel, structural steel, architectural metal, or a related fabrication environment., • Previous foreman or shop-supervision experience preferred., • Ability to read architectural, structural, shop, and fabrication drawings., • Strong field-measuring and site-verification skills., • Knowledge of welding, fitting, cutting, drilling, grinding, and finishing processes., • Experience with railings, stairs, ladders, gates, dunnage, platforms, supports, and similar steel products., • Strong leadership, organizational, scheduling, and problem-solving skills., • Ability to manage multiple projects and changing priorities., • Basic proficiency with email, Microsoft Excel, and project-tracking tools., • Valid driver’s license and ability to travel to project sites throughout New York City and the Tri-State area., • OSHA and applicable welding or safety certifications are preferred. Fab-Tech Steel Group, Inc. is an equal opportunity employer.

Job Description The InProduction team has spent the better part of the last decade combining the best seating and staging companies into a one-stop shop for most of what is needed to produce an event. Starting with SGA Production Services, we added and integrated T&B Equipment, CommuniLux Productions, Nussli U.S., and Seating Solutions to become today’s InProduction. These acquisitions have allowed InProduction to evolve into the largest provider of temporary seating, staging, structures, and scenic production for the United States events industry. The Company is backed by ZMC. ZMC is a leading private equity firm comprised of experienced investors and executives who invest in, and manage, a diverse group of media and communications enterprises. Founded in 2001, ZMC’s investment philosophy centers on operational value creation driven by targeted investment themes, deep sector expertise, and strong partnerships with industry and operating executives. ZMC approaches its investments in collaboration with management teams and has a successful track record of actively adding value to portfolio companies. Come join us! Check out our web page https://www.inproduction.com/ As a Professional Sports Scaffolding Laborer at InProduction, here is what you can expect: • Daily Routine of scaffolding structures at some fascinating professional venues like football and soccer stadiums, baseball fields, tennis courts, golf courses, hockey rinks, and racetracks for example. You can expect to see much of the work we completed while watching a game or event on tv., • Crews which you will be assigned to will be no more than 5 employees and will travel from job to job together as a crew., • Full Time, Consistent and Year-Round Work without having to wonder when or if the next assignment is coming., • Work Environment is generally outdoors so you will be in the sun and fresh air while building., • Overnight Travel will be the routine and you can be away from home for 90+ days at a time., • Travel Accommodations and hotel lodging will be arranged and provided by InProduction. We stay two crew members to a room. Hotel rooms will usually have small kitchens so you can prepare meals., • Benefits are available to you and your eligible family members such as medical insurance, dental insurance, vision insurance. When eligible you will have paid vacation, paid holidays, and great opportunity for weekly overtime.·, • Growth and Opportunity to grow your construction skills which may provide an opportunity to become a Crew Lead, a Foreman, Project Manager, or wherever else it leads you. Additional Duties and Responsibilities: • Build and breakdown scaffolds, install ladders, walkways and handrails, • Assist in the safe and efficient installation/removal of equipment in accordance with project specific plans and layouts, • Inspecting all scaffold components prior to assembly, • Clean and prepare construction sites, including removing debris and materials, • Load and unload equipment and materials form truck and vehicles, • Study plans and equipment lists prior to on-site installation, • Ensure appropriate safety measures are followed; including wearing and use of safety equipment, • Maintain fall protection requirements while erecting / dismantling scaffolds, • Make sure that tools and equipment are cleaned and maintained properly at the end of each shift, • Ensure full client satisfaction in relation to the quality of service and finished product within planned time schedules, • Other duties as required Compensation: $18 and above. Requirements • Background Check and Drug screening required, • Valid driver's license preferred, with good driving record., • Familiar with basic hand tools, drills, saws, hammers, etc., • Cannot be afraid of heights, • Creative problem solver with the ability to handle multiple tasks simultaneously, • Ability to work both independently and within a team setting to achieve company goals, • Able to lift-up to 75Ibs, • Candidate should be able read and understand basic safety instructions, • Candidates from a Scaffolding, Carpentry, Construction, Laboring or Events background are preferred., • Must be capable of working overtime, • Preferred but not required: Bi-lingual (English/ Spanish) Benefits • Medical, Dental, and Vision Insurance, • 401K Match, • 100% company paid Basic Life and AD&D Insurance, • Voluntary supplemental benefits, • Paid Holidays, • Paid Vacation, • Paid Sick, • Daily Per-Diem

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Flexible schedule, • Free uniforms, • Opportunity for advancement, • Paid time off Experienced Mover / Helper – Moving Company We’re hiring experienced Movers/Helpers who know how to work efficiently, protect furniture properly, and handle moves the right way from start to finish. This is not an entry-level position — you must have real moving experience. Responsibilities: • Load and unload household goods safely and efficiently, • Properly wrap and protect furniture (blankets, shrink wrap, padding), • Pack boxes professionally (kitchen, fragile items, etc.), • Assist with crating and handling high-value items, • Follow direction from the Foreman while working independently when needed, • Maintain a clean, professional attitude with customers Requirements:, • Previous moving experience is REQUIRED, • Must know how to pack, wrap, and protect items properly, • Experience with crating and handling fragile/high-value items, • Physically able to lift heavy furniture consistently, • Reliable and punctual — no exceptions, • Must have reliable transportation Compensation:, • Hourly pay + tips, • Paid twice a month, • Overtime available Who we’re looking for:, • Movers who already know what they’re doing, • People who take pride in quality work (not rushed, sloppy jobs), • Team players who show up ready to work Apply now if you have real moving experience and want steady work.

Job Description Position Title: General Laborer Location: Brooklyn VA Medical Center, Brooklyn, NY Employment Type: Full-Time Position Start Date: August 01, 2026 Salary: Competitive Position Summary MILVETS Systems Technology, Inc. is seeking a motivated General Laborer to join our team and support the Electronic Health Record Modernization (EHRM) Infrastructure Upgrades project at the Brooklyn VA Medical Center. If hired, you’ll be an integral part of our crew, helping support telecommunications installers on renovation projects. Must be physically fit and able to perform repetitive tasks for long periods of time. About the company: Since its founding in 1986, MILVETS Systems Technology, Inc. has been a reliable provider of quality services in the information and technology fields. As a Service-Disabled Veteran-Owned Small Business, certified by the Small Business Administration as a Small Disadvantaged Business, the company was founded to offer efficient, cost-effective information technology services to commercial and government clients. General Experience: Ensuring the work area is clean after each task. Assist telecom technicians and electricians with installation of conduit and hardware. Maintain inventory of parts to facilitate work. Pickup, move, and deliver materials. Functional Responsibility: Responsible for helping to install fiber, copper, and hardware installation for large scale cabling and infrastructure projects from start to finish. Reading and interpreting project drawings, help ensuring quality work, and documenting daily work. Assist foreman and technicians implementing projects by deadlines to ensure on time completion. Minimum Education: High School Education or GED Qualifications: Must be able to lift and walk with heavy loads. Load or unload building materials to be used in construction. Construction laborers and helpers perform tasks, such as using, supplying, or holding materials or tools and cleaning work areas and equipment, on construction sites. Care for and properly maintain tools and test equipment. Ensure daily clean up. Take steps to reduce or eliminate site hazards for the team and by standers. Operate in a safe manner at all times and wear all PPE required. Color vision: Laborers must be able to distinguish color clearly to perform their duties, such as knowing which colors of wire an electrician needs. Mathematics: Laborers have to perform calculations every day. Math skills that are vital to laborers include algebra and trigonometry, among others. Stamina and endurance: To perform their very physical job, laborers have to conduct strenuous and physically demanding tasks for long hours and in extreme environmental conditions. Strength: The lifting duties involved in the job of a laborer often require lifting and carrying weights in excess of 50 pounds. Required: • OSHA 10 Certificate or card, • TB blood tests results, (also called interferon-gamma release assays or IGRAs) Applicants for U.S. based positions with MILVETS Systems Technology, Inc. must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. www.dhs.gov/E-Verify E-Verify is a registered trademark of the U.S. Department of Homeland Security. This business uses E-Verify in its hiring practices to achieve a lawful workforce. Equal Employment Opportunity All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. MILVETS Systems Technology, Inc. is an Equal Employment Opportunity/Affirmative Action Employer and maintains a Drug-Free Workplace. MILVETS Systems Technology, Inc. (“MILVETS”) uses JazzHR Talent Fit AI to assist in candidate evaluation. This tool leverages artificial intelligence to generate insights but does not make autonomous hiring decisions. All employment decisions are made solely by MILVETS’ recruitment and management teams. Candidate data processed through JazzHR Talent Fit AI is handled in compliance with applicable privacy and data protection regulations, including GDPR, and MILVETS’ internal policies. MILVETS is an Equal Opportunity Employer (EOE) and complies with all relevant EEOC regulations to ensure fair and equitable hiring practices. By applying, candidates acknowledge and consent to the use of this tool for recruitment purposes. Powered by JazzHR KCfyycXFJZ

Job Description The Role We’re hiring a Commercial Landscapers to do the hands-on work that keeps our commercial properties looking their best across the NYC metro. Working as part of a field crew under a foreman’s direction, you’ll handle the planting, pruning, mowing, cleanups, and seasonal work our clients count on — at the quality standard Cambridge is known for. This is a great entry point into a company where people build long careers. Show up, work hard, and take pride in your sites, and there’s real room to grow into senior crew, foreman, and specialized roles. · Additional work during October, November, December and January for Holiday décor installation and breakdown. This work does require long hours each week. What You’ll Do • Do the work. Mow, edge, plant, prune, weed, mulch, water, and keep beds and grounds clean and healthy across our commercial sites., • Handle the seasons. Spring and fall cleanups, leaf removal, seasonal planting rotations, and snow and ice work when the weather calls for it., • Operate equipment safely. Use mowers, trimmers, blowers, hedge trimmers, and hand tools the right way, following all safety rules at all times., • Follow the plan. Take direction from your foreman, work efficiently, and complete each task to Cambridge’s quality standard., • Keep things in order. Help load and unload the truck, keep the work site and equipment clean, and report any equipment problems., • Work as a crew. Pitch in, communicate with your team, and be a dependable second set of hands wherever you’re needed., • Respect the property. Treat every client site with care and leave it cleaner than you found it. What We’re Looking For • A reliable, hardworking attitude — no prior experience required. We’ll train the right person, and previous landscaping, grounds, or outdoor labor experience is a plus., • Dependable and punctual, with a reliable way to get to our Long Island City warehouse for early-morning starts., • Able to lift 50+ lbs repeatedly and work outdoors in all seasons and conditions — standing, bending, kneeling, and doing repetitive tasks throughout the day., • Comfortable using (or learning to use) hand and power landscaping equipment safely., • Able to follow written and verbal instructions and work well as part of a crew., • At least 18 years old and legally authorized to work in the U.S., • A valid driver’s license is a plus, but not required. Compensation & Benefits • 401(k) with company match., • Dental and vision insurance., • Paid vacation., • Paid lunch. Additional Pay for What You Bring We pay more for experience and credentials that make you more effective in the field — and we’ll help you earn them as you grow: • NYS DEC Commercial Pesticide Technician certification — especially Category 3A (Ornamentals, Shade Trees & Turf). This lets you apply pesticides in the field under a certified applicator’s supervision., • Experience operating commercial landscape equipment (riding and walk-behind mowers, trimmers, blowers, hedge trimmers)., • Irrigation experience., • Masonry and hardscape experience., • Commercial Driver’s License (CDL)., • Bilingual (English/Spanish) — a strong plus on a busy crew. Schedule • 7 to10-hour shifts, Monday to Saturday., • Sunday availability may be required (landscaping work is seasonal, and peak season and weather can call for Sunday hours)., • 9 hour shifts 7 days a week for about 8 to 10 weeks in the winter season for Holiday installation and breakdown work.

Job Description We are looking for an experienced professional manager with at least 1 year of hands-on experience in the construction industry to schedule technicians, order materials. organize tools etc. Requirements: • Experience in managing teams of technicians and monitoring their production, • Strong problem-solving and leadership skills., • Ability to manage projects and handle operations independently, • Knowledge of gate and door installations, electrical connections , low-voltage work and welding all helpful. We will train., • Has some experience with computer programs, customer and or field service programs., • Will work in the field and office. If you are responsible, motivated, and ready for a long-term opportunity with growth potential, we’d like to hear from you \nCompany Description Been in business since 2017 installing and maintaining commercial gates and doors. Been in business since 2017 installing and maintaining commercial gates and doors.

Job Description We are looking to hire a Junior Carpenter / Handyman to join our team! Your main responsibilities will be carpentry / fire stopping work in hospital setting as well as miscellaneous handyman work associated with cosmetic renovations & repairs. Role and Responsibilities • MUST show up on time & Following safeguards, rules, and regulations per the job site foreman/manager., • Perform Installation & Repairs of framing, sheetrock, doors & hardware, ceiling tile, etc., • Patch holes and apply drywall compound, sand and prepare for painting on newly constructed or repaired walls., • Removing and reinstalling fixtures (e..g, doorknobs, electric switch covers) as necessary., • Misc. maintenance work including minor masonry repairs, fire stopping, cleaning, etc., as needed., • Ability to work above ceiling documenting and performing fire stopping with various materials., • Maintaining jobsite inventory of supplies, site tools and equipment., • Provide accurate and complete documentation of prior conditions and work performed for customer reporting using phone/tablet., • Maintain professional and timely communication with customers and AFG management., • Reviewing and implementing work orders and assignments, • Following safeguards, rules, and regulations., • The above is a brief job descripitions, job duties can change to accommodate clients request. Job Requirements • Good verbal and written communication skills., • Must be self-motivated and possess the ability to perform work throughout a facility self-directed which includes communication with customers and staff., • Maintain a professional appearance which includes consistent on-time arrival at job sites., • Administer proper infectious control measures as per hospital requirements when performing inspections., • Ability to learn how to read, follow, and label Life Safety Plans/Drawings., • Capable of aligning work schedule with the on-site need for tools and materials, which includes unloading and loading of these materials and tools, and any other necessary equipment., • Knowledge of computer software (Microsoft Word & Excel, Email, and Adobe Acrobat), • Efficient with smartphones, tablets, computers, and chosen applications for daily reporting., • 20% out-of-town travel required (30+ miles). Additional Requirements • Valid driver license with an acceptable driving record., • Minimum 2 - 3 years experience in carpentry / building renovations & repairs. Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • 8:00am – 4:00pm regular work hours at jobsites throughout NYC & Long Island, • The employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs & ladders; balance; stoop, kneel, crouch or crawl; talk and hear., • Associate is required to spend 30% or more of time climbing and using various ladders., • Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • Must be able to lift and/or move up to 50 pounds independently., • Working extended hours which includes evenings and weekends (compensation provided)., • Paid Holidays & Paid Time Off (vacation, sick, personal)\nCompany Description We specialize in Operation, Inspections, Repairs, and Renovations of Healthcare Facilities in the NYC area. We specialize in Operation, Inspections, Repairs, and Renovations of Healthcare Facilities in the NYC area.

Job Description Job Description Looking for a personable and experienced Site Foreman to lead the team on our projects, while fulfilling one of the skilled trade roles needed on site. You will be the point of contact for both workers and supervisors and you will be a key person for the projects success. You must be well-organized and ensure that safety is an on site priority. Physical requirements are: Stand, walk, or sit for extended periods; Stoop, kneel, or crouch; Talk, hear, see, read and write; Use your hands and fingers to handle, feel or move objects, tools or controls; Use a smartphone; tablet or other device Use first aid equipment, a fire extinguisher and power and hand tools; Lift, move and carry objects up to 75 pounds. Responsibilities Work and report directly to the Project Manager: Coordinate tasks according to priorities and plans; Monitor the attendance of crew; Plan and deligate general and daily responsibilities; Supervise workers and subcontractors; Site safety precautions are met; Resolve problems when they arise; Report on progress to Project Manager You are available and eligible to start full time employment in the U.S. Experience 5+ years experience in high-end home renovation in Brownstones or High-End Co-ops and Condos Prior experience as Site Foreman and / or Carpenter In-depth knowledge of construction procedures, equipment and OSHA guidelines General understanding of electrical and mechanical systems Ability to read drawings and plans Good physical condition and stamina OSHA 30 and / or SST 42 Worker Card / SST 62 Supervisor Card Pay & Benefits Competitive base salary based on experience and skill level Career path opportunities Generous vacation policy, 401K program, transit reimbursement and maternity & paternity leave. \nCompany Description Paid Vacation and Holidays. Paid Vacation and Holidays.

Job Description Ecotone seeks a skilled finish carpenter with experience in commercial and luxury projects in NYC. We aim to identify an individual with a background in the trades, who thrives in being hands-on with a small team, knows their way around the wood shop and job site, and enjoys building. This individual can manage detailed finish carpentry installations, technical millwork installations, fine woodworking details, and coordination between our Brooklyn shop and job site locations. A requisite for this job is a familiarity with the logistics and challenges of a city-based installation team on job sites in and around the city. This individual should also have experience in a woodshop and with production techniques of install-ready components. Work would be split between fabrication work at the shop and installation work on job sites, sometimes requiring more shop work and sometimes requiring more installation work. Responsibilities • Success in this position depends primarily on a passion for building., • This critical role player should be at home in the field and the shop with other trades, working closely with management and in-house construction and design teams., • Our operation is a design and build, so this role requires a technical understanding of custom millwork and a willingness to work alongside designers to incorporate technical knowledge of the process into the design for logistical considerations., • Comfortable with taking the lead on developing and implementing installation processes., • As a critical role player, this individual should understand what contributes positively to our culture., • Strong communication skills, excellent follow-through, and a detail-oriented inclination are prerequisites., • Takes an intermediate to lead role in various phases of millwork production and on-site millwork installations, including but not limited to the following:, • Millwork panels, • Custom wooden benches, • Plywood casework, • Tongue and Groove cladding, • Finish / Trim Carpentry, • Works alongside other installers and fabricators when required., • Willingness to travel within NY and NJ for occasional travel installations., • Provides clarifications and in-field solutions to the construction and design teams during the fabrication and installation. Qualifications • Osha 30, SST, etc. A competent person and related cards are a bonus., • 3-5 Years minimum previous experience in relevant wood shop fabrication role., • 3-5 Years of background experience hands-on in a skilled trade, ideally millwork., • Knowledge of materials, construction techniques, details, methods, and tools., • Must be able to communicate their ideas and solutions quickly., • Strong interpersonal relationship skills and emotional intelligence., • Flourishes in a role where the team is counting on them., • Ability to learn new technology and adjust to new work patterns., • Strategic, creative thinker, troubleshooter, and problem solver, capable of identifying inefficiencies, assessing issues, developing systems, and implementing solutions., • Takes ownership of installation workflow., • Collaborative and enjoys working as an integral part of a small team. Additional Details • This is a full-time position., • This position will be based out of our Brooklyn shop but is primarily in the field., • Salary Range commensurate with experience., • For the right candidate, there is room to grow with a growing company into a foreman/construction manager role., • The ability to coordinate trades and manage materials ordering / logistics provides incentives for Ecotone to fastrack the growth of this role player within the company.\nCompany Description Based in Brooklyn, Ecotone's full-service design and construction studio creates revitalizing wellness spaces, including spas, indoor gardens, and public works. As a design/build operation, Ecotone has developed expertise in several practice areas, including in-house technical & architectural design, precision fabrication, commercial construction management, and specialty trade contracting. Detail, quality, professionalism, and craftsmanship are the cornerstones of our foundation as a firm. Our team recognizes that passionate and talented people are critical to our business's success and design approach. Therefore, we seek to foster and develop long-term working relationships within our organization and network. Based in Brooklyn, Ecotone's full-service design and construction studio creates revitalizing wellness spaces, including spas, indoor gardens, and public works. As a design/build operation, Ecotone has developed expertise in several practice areas, including in-house technical & architectural design, precision fabrication, commercial construction management, and specialty trade contracting. Detail, quality, professionalism, and craftsmanship are the cornerstones of our foundation as a firm. Our team recognizes that passionate and talented people are critical to our business's success and design approach. Therefore, we seek to foster and develop long-term working relationships within our organization and network.

Job DescriptionDescription: Job Description: The Carpenters Training Center is looking for a knowledgeable and experienced Drywall and Metal Framing Installation Instructor to join our team on a part-time basis. The primary responsibility of this role is to provide hands-on training to members in the installation of Framing and Drywall, utilizing the correct tools, techniques, and materials. The ideal candidate will have extensive experience in the field, with the ability to guide members through the full process of installation, preparation, and maintenance. This position requires strong communication skills, a dedication to safety and quality, and a passion for educating the next generation of members. Job Responsibilities: · Design and implement instructional programs on framing and drywall installation, including understanding blueprints, layout and industry best practices. · Provide hands-on demonstrations and training in preparation, material selection, installation techniques, and finishing processes. · Assess member progress, providing individualized feedback and support to foster growth and skill development. · Remain current on industry advancements, tools, techniques, and trends related to framing and drywall installation. · Ensure a safe and inclusive learning environment, adhering to all safety and quality standards. · Communicate effectively with members, fostering engagement and motivation in the learning process. Requirements: Qualifications & Experience: · Must be a member in Good Standing with The New York City District Council of Carpenters. · High school diploma or equivalent; certifications in doors and hardware installation or a related trade preferred. · At least 10 years of experience in framing and drywall installation. · Deep knowledge of materials, tools, and techniques used in framing and drywall installation. · Excellent communication and interpersonal skills, with the ability to motivate and engage a diverse group of learners. · Basic proficiency with PC and tablets, as well as related software for instructional purposes. Skills & Abilities: · Strong verbal and written communication skills. · Proficiency with Microsoft Office applications (Outlook, Word, Excel, PowerPoint). · Ability to analyze reports and data relevant to instructional outcomes. · Detail-oriented, organized, and capable of managing tasks through to completion. · Able to work effectively with individuals from diverse backgrounds. The New York City District Council of Carpenters Training Center offers competitive salaries and comprehensive benefits. The Carpenters Training Center is an equal opportunity employer and encourages applications from all qualified candidates regardless of gender, race, ethnicity, age, sexual orientation, marital status, religion, or disability. M/F/D/V Interested candidates should submit a cover letter and resume to resume@nyccbf.org. The hourly rate for this position is based on the General Foreman rate of the Collective Bargaining Agreement; currently $66.05 per hour.

Job DescriptionForeman Organization: Hayes Pump, Inc. Location: Fairfield, NJ FLSA Status: Non-Exempt Pay Range: $40.00 - $50.00 per hour Position Summary Hayes Pump, the largest industrial, commercial, and municipal pump distributor in the Northeast, is seeking a Foreman to lead our growing New Jersey service operation. This position combines technical pump expertise with leadership responsibilities, overseeing daily service operations, coordinating technician schedules, supporting customers, and ensuring high-quality repair and maintenance services. The ideal candidate is an experienced pump mechanic who is ready to take the next step into leadership while remaining actively involved in service operations and technical problem-solving. Benefits Competitive hourly pay Overtime opportunities Company vehicle (if applicable) Factory and manufacturer training Career advancement opportunities Team-oriented work environment Industry-leading products and technical support Comprehensive benefits package Key Responsibilities Supervise and support service technicians and shop personnel. Coordinate daily schedules, work assignments, and service priorities. Serve as the primary technical resource for pump repair and troubleshooting activities. Oversee shop operations and field service activities to ensure quality, efficiency, and safety. Assist with recruiting, interviewing, onboarding, and developing service team members. Participate in hiring decisions and support department growth initiatives. Prepare service packages, work orders, and documentation using company systems and CRM tools. Communicate with customers regarding service needs, repair recommendations, and project updates. Support field service technicians with technical guidance and troubleshooting assistance. Monitor workflow, productivity, and service quality standards. Participate in hands-on repair, maintenance, and rebuild activities as needed. Promote a culture of safety, accountability, and continuous improvement. Ensure all work is completed in accordance with company policies and customer expectations. Required Qualifications Minimum 5 years of pump repair and service experience. Strong knowledge of centrifugal, split-case, and end suction pumps. Proven ability to diagnose and troubleshoot complex pump systems. Experience coordinating work schedules and service activities. Strong customer service and communication skills. Ability to lead, mentor, and support technicians. Experience working independently and making sound operational decisions. Proficiency with computers, service documentation, and CRM systems. Valid driver's license with an acceptable driving record. Ability to obtain a DOT Medical Card. Preferred Qualifications Previous experience as a Lead Technician, Foreman, Supervisor, or Service Manager. Experience working with municipal, industrial, and commercial pumping systems. Experience managing technicians, schedules, and customer expectations. Knowledge of pump manufacturers including Goulds, Xylem, Gorman-Rupp, Fairbanks Morse, Grundfos, Viking, Aurora, or similar products. Knowledge of electrical controls and motor troubleshooting. OSHA 10 certification. Technical or trade school education in a mechanical field. Team Structure Initially supervises approximately 3 employees. Will oversee two newly hired Service Repair Mechanics. Expected to manage 4–5 employees as the department continues to grow. May assist in overseeing future assembly and service operations as responsibilities expand. Schedule & Travel Typical schedule: 7:00 AM – 3:30 PM. Based in Fairfield, NJ. Travel to customer locations and field sites as needed. Travel may increase as service operations continue to expand. Overnight travel may occasionally be required. Travel time is compensated in accordance with company policies. What Makes Someone Successful Successful Foremen are: Highly skilled pump mechanics who lead by example. Strong communicators who build trust with employees and customers. Organized professionals who can effectively balance technical work, scheduling, and leadership responsibilities. Customer-focused and responsive to service needs. Comfortable making decisions and solving problems independently. Committed to safety, quality workmanship, and continuous improvement. Why Join Hayes Pump? Hayes Pump is the Northeast's largest industrial, commercial, and municipal pump distributor. Joining our team means becoming part of an organization known for technical expertise, exceptional customer service, and long-term employee growth. This is an excellent opportunity for an experienced technician looking to advance into a leadership role and help shape the future of a growing service operation.

Job DescriptionDescription:G-Net Construction is hiring a full-time Carpenter Foreman to manage commercial interior renovation and facility maintenance projects across NYC. This is a hands-on supervisory position for an experienced carpenter who can manage small field crews, coordinate daily work, communicate with the office, and keep projects moving safely and efficiently. We are looking for someone who can lead by example, work neatly, communicate clearly, and help maintain G-Net’s standards for quality, teamwork, and professionalism. Responsibilities: • Supervise small field crews on commercial interior renovation projects., • Read plans, review daily work, and coordinate field tasks ., • Manage job site layout, materials, tools, equipment, and daily progress., • Coordinate with project managers, office staff, clients, and other trades., • Track manpower, schedules, deliveries, and job site needs., • Enforce safe work practices and proper use of PPE., • Perform hands-on carpentry work when needed., • Maintain clean, organized, and professional job sites., • Communicate field issues, changes, and project needs clearly and promptly. Required Qualifications: • 7+ years of carpentry field experience preferred., • Prior foreman, crew leader, or field supervisor experience preferred., • OSHA-40 required for NYC field work., • Must be able to work on the books., • Must have own carpentry hand tools and basic power tools., • Must communicate clearly with office staff, field staff, clients, and trade., • Must be able to manage small crews and maintain daily job site organization. Preferred Qualifications: • Staten Island resident with a valid driver’s license is strongly preferred, but not required., • Commercial interior renovation experience is strongly preferred., • Basic blueprint reading and layout skills are strongly preferred., • Experience with schools, healthcare, nonprofit, senior care, or occupied buildings is a plus., • Own vehicle or reliable transportation is a plus. Growth Opportunity:This role has room to grow for someone who can manage people, communicate well, maintain quality standards, and support G-Net’s commercial construction and facility maintenance work. How to Apply:Please apply through our Field Positions page: https://www.gnetconstruction.com/field-positions/ Include your resume, desired hourly rate, years of experience, certifications, and examples of relevant project experience. Qualified candidates will be contacted for an in-person interview.

Job DescriptionBuilt for Delivery Green Leaf Construction was founded in 2014 by professionals with decades of experience providing construction management and design build services. Our team is well positioned to support clients from project conception to final construction. By offering turnkey, client-oriented services, we are better able to act in the project’s best interest to control the value, quality, and timeliness of the end product. Our dedicated personnel work seamlessly with each client to create an integrated and efficient project team. We have a wide range of experience in construction techniques and delivery methods, and have built facilities for clients in advanced technology, healthcare, scholastic, commercial and industrial markets. The Mission As a travelling Carpenter, you’ll take senior-level ownership of high-visibility commercial builds—driving outcomes, protecting schedule, and setting the craftsmanship bar on jobs that move. Key responsibilities • Lead and shape complex framing, blocking/backing, doors/hardware, finish work, and temporary works as projects evolve, • Interpret blueprints/specs, execute precise layout, and verify dimensions with lasers/transits (total station preferred), • Coordinate daily with the superintendent and trades to keep production flowing and conflicts down, • Run tools/equipment safely and efficiently; uphold OSHA and site safety expectations, • Spot constructability issues early and propose practical field solutions, • Mentor carpenters/apprentices and uphold professional jobsite standards Required qualifications • 10+ years commercial carpentry experience; able to work independently and lead crews, • Strong layout/measurement skills; high quality, safety, and schedule focus, • OSHA 30 (or obtain immediately), valid driver’s license/clean record; able to travel/overnight If you’re ready for strategic impact in Commercial Construction and Design Build, apply now. On the Road, On Point You roll into a new site ready to make an immediate mark—checking the plan set, aligning with the Foreman/superintendent on priorities, and setting a crisp pace for the crew. Travel and overnights are part of the rhythm, and each stop brings a fresh puzzle: tight tolerances, shifting site conditions, and coordination moments where your judgment keeps momentum alive. Between lifts, layout checks, and punch-list pushes, you’re the steady hand that keeps quality sharp and clients confident. By day’s end, you’ve advanced the build, cleared tomorrow’s constraints, and left the site cleaner, safer, and closer to turnover—classic Commercial Construction, delivered with Design Build intensity. Total Rewards Medical, dental, and vision insurance; 401(k); life insurance and voluntary life insurance; Health Savings Account (HSA); AFLAC cancer, critical illness, and accident coverage; paid time off; employee discounts; pet insurance; competitive total compensation ($30–$50/hour). As part of the hiring process you may be required to submit to a background, drug and alcohol and/or motor vehicle check.

Job Description Description G-Net Construction is hiring a full-time Lead Carpenter to support commercial interior renovation and facility maintenance projects across NYC. This is a hands-on field position for an experienced carpenter who can work independently, coordinate with supervisors, and help guide helpers or small field teams when needed. This is not a full foreman position, but it does require field leadership, strong communication, and the ability to complete quality work in active job site conditions. Responsibilities • Perform framing, drywall, doors, hardware, trim, and finish carpentry work, • Install cement board, blocking, underlayment, and related materials, • Support kitchen, bathroom, and commercial interior renovation work, • Perform rough carpentry, patching, floor repair, and miscellaneous field work, • Read basic drawings, layouts, and field instructions, • Coordinate with supervisors and other trades, • Help guide helpers or small field teams when needed, • Keep tools, materials, and job sites clean and organized Required Qualifications • 5+ years of carpentry field experience preferred, • OSHA-40 required for NYC field work, • Must be able to work on the books, • Must have own carpentry hand tools and basic power tools, • Must communicate clearly and follow direction from supervisors, • Must work neatly and keep job sites organized, • Must be able to work independently when assigned Preferred Qualifications • Staten Island resident with a valid driver’s license is strongly preferred, but not required, • Basic blueprint reading is a plus, • Door, hardware, drywall, framing, and finish carpentry experience is a plus, • Basic painting, compound, plumbing, electrical, or HVAC knowledge is a plus, • Own vehicle or reliable transportation is a plus Growth Opportunity This role has room to grow into a foreman or supervisory position for someone who demonstrates leadership, communication, quality work, and reliability. How to Apply Please apply through our Field Positions page: https://www.gnetconstruction.com/field-positions/ Include your resume, desired hourly rate, years of experience, certifications, and examples of relevant project experience. Qualified candidates will be contacted for an in-person interview.

Job Description Trades and field service pros know how to talk with homeowners about real decisions. This 100% remote, 1099 independent-contractor life insurance sales role moves that experience indoors, away from the job site and the weather. What you'll actually do • Follow up with people who requested information and set appointments by phone or video, • Ask about the household before presenting anything, like scoping a job before quoting it, • Walk through coverage options and complete the application together, • Follow each case through underwriting and update the client along the way, • Log calls, notes, and next steps in the CRM, • Learn products, carriers, and state rules through ongoing trainingWho this is a fit for, • A background in skilled trades, construction, or field service, • Comfortable giving a straight answer, including "that one isn't right for you", • Willing to learn software, including quoting tools and a CRM, • A state life insurance license, or a plan to get licensed before your first sale, • Self-directed, managing your own schedule with no foreman, • At least 18 and legally authorized to work in the United StatesWhat we provide, • Guidance through state licensing if you aren't licensed yet, • Contracts with 43 carriers, so you recommend what fits instead of one company's lineup, • Access to exclusive lead systems built around people who've already asked about coverage, • A weekly team call, with call reviews, scripts, and ride-alongs available, • One-on-one mentorship from Ben and Andrea, who run the agencyThe honest part Compensation: paid under an independent contractor (1099) contract. If you want to stay hands-on with tools, this isn't the right fit. Apply through this listing; questions: (928) 889-6338. ------------------------------------------------------------------ The Wood Agency Life. Ben Wood, NPN 20251128. Independent insurance agency. Agents are independent contractors (1099) paid under contract. A state life insurance license is required before soliciting or selling business, and licensing timelines vary by state. Equal opportunity — we consider every applicant regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.

Job Description We are seeking for an experienced Construction Project Manager capable of fully managing major public infrastructure projects from award through final closeout. Position Summary Zion Contracting is seeking a Construction Project Manager with extensive hands-on knowledge of construction and significant experience managing public infrastructure projects for New York State and New York City agencies. This is a construction-focused Project Manager position, not an administrative project-management role. The successful candidate must have a strong understanding of how construction work is actually performed in the field, including means and methods, sequencing, subcontractor coordination, labor and equipment productivity, constructability, procurement, scheduling, cost control, change management, and contract requirements. Candidates should have experience working on projects for NYS and NYC public agencies, preferably including MTA, NYCT, LIRR, Metro-North, TBTA, NYCDOT, DDC, or similar agencies. The Construction Project Manager will be responsible for the overall management, financial performance, schedule, coordination, and successful completion of assigned projects. Key Responsibilities • Manage public infrastructure construction projects from award through final completion and closeout., • Coordinate along Superintendent and foreman day to day operation of the project., • Maintain overall responsibility for project cost, schedule, quality, safety, contractual performance, and profitability., • Understand and evaluate construction means and methods, sequencing, constructability, manpower, equipment, and production requirements., • Work closely with Superintendents and field personnel to plan and execute construction activities., • Review contract documents, drawings, specifications, estimates, bid assumptions, and project requirements., • Develop and maintain project budgets, cost forecasts, and cost-to-complete projections., • Track labor, materials, equipment, subcontractor costs, committed costs, and project productivity., • Identify potential cost overruns and schedule problems early and develop corrective actions., • Manage subcontractors and vendors, including scope coordination, procurement, performance, schedule, and change management., • Manage RFIs, submittals, shop drawings, procurement logs, and project documentation., • Identify changes and additional work and ensure that change orders are documented, priced, submitted, tracked, negotiated, and collected., • Prepare and review owner requisitions and subcontractor payment applications., • Coordinate with project scheduling personnel to maintain baseline schedules, monthly updates, look-ahead schedules, and recovery plans., • Monitor long-lead materials, fabrication, and procurement to ensure materials are available when required., • Lead project meetings with owners, agency representatives, consultants, subcontractors, and internal personnel., • Maintain professional working relationships with NYS and NYC agency representatives., • Understand public-agency contract requirements, documentation procedures, approvals, change-order processes, and project controls., • Prepare and review project correspondence and protect Zion's contractual rights regarding changes, delays, differing conditions, and other impacts., • Maintain documentation necessary to support change orders, time extensions, and claims., • Coordinate testing, inspections, commissioning, punch lists, turnover documentation, and project closeout., • Provide executive management with clear reporting regarding schedule, financial performance, field progress, risks, pending changes, procurement issues, and required decisions. Required Qualifications • 5+ years of Construction Project Management experience., • Extensive knowledge of construction means, methods, sequencing, field operations, and project execution., • Significant experience with public infrastructure construction projects for New York State and/or New York City agencies., • Experience with heavy civil, transportation, infrastructure, rehabilitation, or other complex public construction., • Strong understanding of construction contracts, drawings, specifications, scheduling, cost control, procurement, and change-order management., • Ability to read and fully understand construction plans, specifications, details, and contract requirements., • Demonstrated ability to manage subcontractors, field operations, and multiple trades., • Strong financial understanding of project budgets, forecasting, cost-to-complete, productivity, and profitability., • Experience identifying, documenting, pricing, and managing additional work and change orders., • Ability to independently identify problems, develop solutions, and make construction decisions., • Strong written and verbal communication skills., • Strong organizational and documentation skills. Preferred Qualifications • Direct experience with MTA, NYCT, LIRR, Metro-North, TBTA, NYCDOT, DDC, NYSDOT, or other NYS/NYC agencies., • Experience managing public infrastructure projects valued at $10 million or greater., • Experience with Primavera P6., • Familiarity with Oracle Primavera Unifier., • Experience with public works change orders, claims, delays, and contract administration., • Experience with union trades and New York prevailing-wage requirements. Bachelor's degree in Civil Engineering, Construction Management, Engineering, or a related field. Note This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship.