Trabajos industrial en Deer Park, New YorkCrear alertas

Job Description Summary Installs, maintains, alters, repairs, adjusts and tests plant wiring, electrical and electronic equipment which shall include but not be limited to lights, electric motors, machines, equipment controls, radios and communication systems, meters, clocks, attendance recording mechanisms, environmental control systems and utilities. This, however, does not prohibit other employees from changing general illumination lamps and bulbs where no assembly or disassembly of equipment is required. Our pay range for this position is $40-45/hr Duties and Responsibilities • Installs, maintains, alters, repairs, adjusts and tests plant wiring, electrical and electronic equipment which shall include but not be limited to lights, electric motors, machines, equipment controls, radios and communication systems, meters, clocks, attendance recording mechanisms, environmental control systems and utilities. This, however, does not prohibit other employees from changing general illumination lamps and bulbs where no assembly or disassembly of equipment is required., • May perform electrical repair, modification and maintenance of mobile industrial equipment as required., • Charges and repairs batteries and battery charging equipment., • May lubricate equipment during performance of assigned duties. May adjust electrical instruments with thermal or capillary sensing units pursuant to the task., • Uses all tools and equipment pursuant to the task, including hand or power equipment to hoist and move personnel and materials, except mobile cranes., • May transport tools, materials and equipment to and from job site which are to be used by employees in the Electrician job classification., • Performs related tasks as necessary in the completion of the employees primary work assignment in the Electrician job classification., • Works from prints, sketches, specifications, and written or oral instructions and does paperwork pursuant to the task. Required Experience & Skills: • US Citizenship, able to obtain and maintain US DOT security clearance, • High School Diploma or GED, • Ability to work any shift, • Valid Driver's License, • Journeyman Electrician, • Five (5) years of electrician experience Preferred Experience & Skills: • Industrial electrician, • Qualified in low voltage to high voltage, • Troubleshooting and install capabilities, • Industrial controller troubleshooting and experience

Job Description Core Responsibilities: -Inspect, repair, and maintain electrical systems, including wiring, panels, switches, outlets, lighting fixtures, generators, UPS, PDUs, primary switchgear, and emergency backup systems. -Diagnose and resolve issues such as power outages, faults, short circuits, and malfunctioning equipment; perform necessary troubleshooting, testing, and repairs. -Install or modify electrical systems and components during renovations and upgrades. -Conduct preventive maintenance, testing (e.g., grounding, insulation), and record-keeping per schedules, manufacturer guidelines, and NEC standards. -Ensure compliance with electrical/building codes, NFPA, OSHA, and safety standards; inspect emergency lighting, fire alarm interfaces, and life safety systems. -Log work orders, track metrics, and report on activities using department software. -Collaborate with team members and contractors; provide technical support and supervise electrical contractor work as needed. -Perform minor related trade tasks (e.g., demolition, patching, painting, cleanup) to complete electrical assignments. -Attend at least 2-3 professional training sessions annually, including IUOE Local 30 courses. -All other duties as assigned. • Proficient in electrical safety procedures (NFPA 70E and OSHA), • Must have at least 4 years of commercial/industrial experience in the electrical trade., • Ensure all work complies with NEC standards and local building codes., • Shows the ability to work with and around High Voltage up to 13.2 KVA, • Install, maintain, adjust, operate, test and repair branch circuits, power distribution wiring, electrical equipment, fixtures, lighting systems, and conduit in compliance with the National Electric Code (NEC)., • Lead and supervise electrical installations on construction sites, including commercial and industrial projects, • Experience with 208V three-phase , 208V single-phase , 120/240V , 208/240V, 480 Volt 3 phase circuitry ., • Availability – available for emergency calls 24hrs 7 days per week ., • Proficiency in NEC code, designing, installing, and maintaining electrical systems., • Strong problem-solving/troubleshooting, deep mechanical and electrical knowledge, excellent customer service/communication, attention to detail, and time management, • Read and interpret blueprints, schematics, and technical drawings to determine the layout of Electrical systems.

Job Description Local Class A CDL Driver Company: Shea Trucking LLC Location: West Babylon, NY (174 Cabot Street) Job Type: Full-Time, W2 Employee Shift: Early Morning Start (5:00 AM – 6:00 AM) About Shea Trucking For over 50 years, Shea Trucking has been Long Island’s premier air and ocean freight specialist. As a family-owned and operated business, we don't treat our drivers like a truck number—our owners run the day-to-day operations right alongside the team. We have built an unmatched reputation for reliability across Nassau, Suffolk, and Queens counties, and we are looking for professional, dependable Class A drivers to grow with us. Why Drive with Shea? (Compensation & Benefits) We offer a stable, transparent, and highly competitive pay structure with exceptional long-term security. • Hourly Pay: $26.00 per hour., • Overtime: Time-and-a-half ($39.00/hr) paid daily after 8.5 hours., • Medical Coverage: Full medical benefits kicking in after just 3 months of employment., • Retirement Security: A fully funded Pension Plan at $0 cost to you after 1 year of service., • Home Daily: This is a 100% local driving position. You will be home every single night. The Work • Routine: Mostly Drop & Hook operations. Freight handling is rare, keeping your focus on the road rather than heavy lifting., • Variety: Enjoy a change of scenery. You will handle dynamic, different routes each day running between our West Babylon hub, local industrial areas, regional airports, and ocean ports., • Schedule: Reliable morning start times between 5:00 AM and 6:00 AM. What We Are Looking For • Valid Class A Commercial Driver’s License (CDL-A)., • Clean driving record and solid commitment to safety., • Dependable, punctual, and professional work ethic., • TWIC® Card or SeaLink Card: Having these is a major plus! (Please note: A TWIC/SeaLink card is strictly required if you are assigned to container work at the ports). To Apply If you are looking for a reliable, local driving career with an established company that truly invests in your future via premium healthcare and a free pension, we want to hear from you. Apply today to join the Shea Trucking family!

Why join us? Privately owned company Competitive compensation Vehicle allowance / reimbursement 10% travel Benefits Job Details Stack Testing Engineer About the Role We are seeking a Stack Testing Engineer to support industrial air emissions testing, source sampling, and technical analysis. The comp

Job Description Master Plumber (ID# 660) Full-Time | Multiple Locations Nationwide About Our Client - Our Client is a fast-growing, full-service plumbing franchise company. We provide expert residential, commercial, and industrial plumbing, drain, and sewer solutions with same-day service and 24/7 emergency availability. Our team of certified professionals is committed to quality workmanship, upfront pricing, and outstanding customer care. Position Overview We are seeking a licensed Master Plumber to join our growing team. In this role, you will lead plumbing projects from start to finish, mentor apprentice and journeyman plumbers, and serve as the technical authority on job sites. You will be the face of Our Client — delivering the five-star service our customers count on. Key Responsibilities • Inspect, install, repair, and maintain plumbing systems including pipes, fixtures, sewers, drains, water heaters, and gas lines, • Diagnose plumbing issues and develop effective, code-compliant solutions, • Lead and mentor apprentice and journeyman plumbers on job sites, • Read and interpret blueprints, schematics, and building specifications, • Ensure full compliance with local, state, and federal plumbing codes and safety regulations, • Provide upfront pricing estimates and communicate clearly with customers, • Respond to emergency service calls as needed, including nights and weekends, • Maintain accurate records of work performed, parts used, and time on site, • Coordinate with dispatchers and project managers to ensure timely job completion Qualifications • Active Master Plumber license in the state of employment (required), • Minimum 5 years of plumbing experience, including journeyman-level work, • Strong knowledge of residential, commercial, and emergency plumbing systems, • Ability to read blueprints and technical specifications, • Excellent customer communication and problem-solving skills, • Valid driver's license and clean driving record, • Ability to lift up to 75 lbs and work in confined spaces or at heights Compensation • Base salary: $75,000 – $95,000 per year, depending on experience and location, • Top earners (high-demand markets): up to $118,000+, • Hourly equivalent: $36 – $46/hour, • Overtime and emergency call pay available (1.5x–2x standard rate), • Performance-based bonuses Benefits • Medical, dental, and vision insurance, • Paid time off and holidays, • Company-provided vehicle or vehicle allowance, • Uniforms and equipment supplied, • Ongoing training and professional development, • Career advancement opportunities Why Our Client? We invest in our people. Whether you're looking to grow into a leadership role or simply want a stable, well-paying career doing the work you love, Our Client offers the support, technology, and reputation to help you thrive.

Job Description Journeyman Plumber (ID# 661) Full-Time | Multiple Locations Nationwide About Our Client Our Client is a fast-growing, full-service plumbing franchise. We provide expert residential, commercial, and industrial plumbing, drain, and sewer solutions with same-day service and 24/7 emergency availability. Our team of certified professionals is committed to quality workmanship, upfront pricing, and outstanding customer care. Position Overview We are seeking a licensed Journeyman Plumber to join our growing team. In this role, you will work independently on a wide range of residential and commercial plumbing projects, supervise apprentices, and deliver the high-quality service our customers depend on. This is a great opportunity to grow your career within a nationally recognized organization. Key Responsibilities • Install, repair, and maintain plumbing systems including pipes, fixtures, drains, sewers, water heaters, and gas lines, • Diagnose plumbing issues and execute effective, code-compliant solutions, • Work independently on residential and commercial job sites with minimal supervision, • Supervise and guide apprentice plumbers on assigned projects, • Read and interpret blueprints, schematics, and technical specifications, • Ensure compliance with local, state, and federal plumbing codes and safety standards, • Communicate clearly with customers and provide upfront pricing estimates, • Respond to emergency service calls as needed, including evenings and weekends, • Maintain accurate job records including work performed, parts used, and time on site, • Coordinate with dispatchers and Master Plumbers to ensure timely project completion Qualifications • Active Journeyman Plumber license in the state of employment (required), • Minimum 3–5 years of plumbing experience, including completion of a recognized apprenticeship program, • Solid knowledge of residential and commercial plumbing systems, • Ability to read blueprints and technical documents, • Strong customer communication and problem-solving skills, • Valid driver's license with a clean driving record, • Ability to lift up to 75 lbs and work in confined spaces or at heights Compensation • Base salary: $60,000 – $79,500 per year, depending on experience and location, • Top earners (high-demand markets): up to $92,500+, • Hourly equivalent: $29 – $38/hour, • Overtime and emergency call pay available (1.5x–2x standard rate), • Performance-based bonuses, • Clear path to Master Plumber advancement Benefits • Medical, dental, and vision insurance, • Paid time off and holidays, • Company-provided vehicle or vehicle allowance, • Uniforms and equipment supplied, • Ongoing training and professional development, • Career advancement opportunities Why Our Client? We invest in our people. Whether you're looking to advance to Master Plumber status or build a long-term career in a stable, high-demand trade, Our Client provides the tools, training, and support to help you get there.

Job Description Apprentice Plumber (ID# 662) Full-Time | Multiple Locations Nationwide About Our Client Our Client is a fast-growing, full-service plumbing franchise. We provide expert residential, commercial, and industrial plumbing, drain, and sewer solutions with same-day service and 24/7 emergency availability. Our team of certified professionals is committed to quality workmanship, upfront pricing, and outstanding customer care. Position Overview We are seeking a motivated Apprentice Plumber to join our growing team. This is an excellent opportunity to launch your plumbing career by learning hands-on from experienced Journeyman and Master Plumbers in a supportive, fast-paced environment. You will earn while you learn, gaining the real-world skills and training needed to advance toward your Journeyman license. Key Responsibilities • Assist Journeyman and Master Plumbers with the installation, repair, and maintenance of plumbing systems including pipes, fixtures, drains, sewers, and water heaters, • Perform basic plumbing tasks such as pipe cutting, fitting assembly, and fixture installation under direct supervision, • Transport tools, equipment, and materials to and from job sites, • Maintain a clean, organized, and safe work environment on all job sites, • Follow all safety protocols, building codes, and company procedures, • Support senior plumbers with emergency service calls as needed, • Complete required classroom or technical training as part of an apprenticeship program, • Maintain accurate records of work performed and materials used, • Communicate professionally with customers and team members Qualifications • High school diploma or GED required, • Enrollment in or willingness to enroll in a licensed plumbing apprenticeship program, • Basic mechanical aptitude and eagerness to learn the trade, • Ability to follow instructions and work effectively as part of a team, • Strong work ethic, reliability, and punctuality, • Valid driver's license with a clean driving record, • Ability to lift up to 75 lbs and work in confined spaces, at heights, or outdoors in varying weather conditions, • Prior construction, maintenance, or trade experience a plus but not required Compensation • Base salary: $34,000 – $47,500 per year, depending on experience and location, • Hourly equivalent: $16 – $23/hour, with increases as apprenticeship milestones are met, • Top earners in high-demand markets: up to $56,500+, • Overtime pay available (1.5x standard rate), • Pay increases tied to apprenticeship progression Benefits • Medical, dental, and vision insurance, • Paid time off and holidays, • Company-provided vehicle or vehicle allowance, • Uniforms and equipment supplied, • Paid on-the-job training, • Tuition/apprenticeship program support, • Clear career path to Journeyman and Master Plumber, • Career advancement opportunities Why Our Client? We believe in building careers from the ground up. As an Apprentice Plumber with Our Client, you'll gain the hands-on experience, mentorship, and structured training needed to grow into a highly skilled, well-compensated plumbing professional — all while earning a competitive wage from day one.

Job Description Position: Warehouse Associate Location: Hauppauge, NY 11788, USA Duration: 8-month contract-to-hire Pay Rate: $19.50/hr (Weekly Pay) Shift: 2nd shift 3.30pm-12am Job Summary: The Warehouse Associate supports daily warehouse operations by performing physical and administrative tasks related to shipping, receiving, storing, and fulfilling orders. Responsibilities include wrapping, boxing, staging shipments, and maintaining inventory accuracy while ensuring compliance with safety procedures and operational standards. Key Responsibilities: • Perform quality checks on inbound and outbound shipments., • Stage, pack, and prepare outbound shipments according to site policies., • Execute ERP system transactions for inbound and outbound shipments., • Update FMS for parcel and freight shipments., • Utilize handheld RF scanners and Warehouse Management Systems to fulfill orders., • Maintain inventory accuracy and proper documentation., • Handle and control hazardous materials safely., • Follow 5S safety, housekeeping practices, and regulatory compliance requirements., • Complete all required safety training and follow protocol in risk situations., • Use appropriate Personal Protective Equipment (PPE) for assigned tasks., • Lift up to 75 pounds unassisted., • Operate powered industrial trucks including work assist vehicles (WAV), off-the-ground order pickers (up to 35' off the ground), reach trucks, dock stockers, and powered pallet jacks., • Create repair RMAs and manage receiving/shipment issues within repair systems., • Develop familiarity with products, processes, operational metrics, and software tools; follow work instructions to meet productivity and quality standards., • Contribute to continuous improvement initiatives, including work instruction documentation and process standardization., • Resolve basic operational problems and perform simple analysis., • Evaluate and maintain warehouse equipment., • Create expense orders for internal repair consumption., • Ensure compliance with ISO requirements and prepare for external audits., • Perform other duties as assigned. Qualifications: • Education: High School Diploma or GED preferred but not required, • Experience: 1 year of warehouse, shipping, or related experience preferred, • Skills and Competencies:, • Effective verbal and written communication, • Basic computer literacy (Microsoft Office and desktop applications), • Basic math skills and ability to read a ruler, • Fundamental reading and writing skills, • Licenses/Certifications: None required, but forklift/powered industrial truck certification is a plus Physical Requirements and Environmental Conditions: • Must be able to lift up to 75 lbs unassisted, • Ability to stand, bend, reach, and move materials throughout the workday, • Work in a warehouse environment with potential exposure to noise, dust, and varying temperatures, • Use appropriate PPE, including safety glasses, steel-toed boots, and gloves \nCompany Description Della Infotech Inc is in the staffing business for 10 years. Over the years, we have placed hundreds of candidates to various temp and permanent positions with our 50+ happy clients all over US and Canada including Fortune 500 corporations. Della Infotech Inc is in the staffing business for 10 years. Over the years, we have placed hundreds of candidates to various temp and permanent positions with our 50+ happy clients all over US and Canada including Fortune 500 corporations.

Job DescriptionSalary: $17 - 18 per hour + none Reference: 1033560-19 Seeking a variety of work with the certainty of a reliable pay? Join us as a light industrial worker / cross-trained production support specialist. We offer access to a diverse range of short-term mandates across assembly, manufacturing, and distribution, allowing you to build new skills and experience across different industrial environments. Perfect for those who seek variety and great flexibility in their working life. Your responsibilities: • Production assembly: perform repetitive light assembly tasks or machine tending duties on production lines., • Quality checks: conduct visual quality inspections on finished components, removing and reporting any defective items., • Packaging and labeling: accurately pack products into cartons, apply correct shipping labels, and prepare pallets for movement., • Inventory staging: assist with staging materials, ensuring production lines are constantly stocked with necessary components., • Skill adaptability: quickly learn new procedures and adapt to different roles within the light industrial setting during each mandate. location: Melville, NY work hours: Variable skills: • Bilingual (English & Spanish), • Load, unload materials & equipment, • Operate hand truck/dolly, • Inspect material supplies and inventory dress code: Shirts or t-shirts must have sleeves and be without any holes or rips. Pants without any holes or rips. No profane or suggestive texts and images. Closed toe and non slip footwear only. Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. At Randstad, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require a reasonable accommodation to make your application or interview experience a great one, please contact HRsupport@randstadusa.com. Pay offered to a successful candidate will be based on several factors including the candidate's education, work experience, work location, specific job duties, certifications, etc. In addition, Randstad offers a comprehensive benefits package, including: medical, prescription, dental, vision, AD&D, and life insurance offerings, short-term disability, and a 401K plan (all benefits are based on eligibility). This posting is open for thirty (30) days. ZPMLAPPSD

Customer Growth Manager - Defense Search \n OVERVIEW \n Are you looking for a new career opportunity with an exciting Defense/Aerospace company?! Then we've got the right team for you! In this role, you're responsible for the duties listed below. \n \n Immediate opening for a Customer Growth Manager in Hauppauge, NY who possesses: \n\n • 4+ years of commercial, customer relationship management, inside sales, or related customer growth experience\n, • Strong analytical ability with the ability to interpret data and translate it into meaningful business insight\n, • Experience with semiconductors, discrete semiconductors, electronic components, or related technical products highly preferred\n, • Proven ability to convert a high volume of quotes and leads into new or expanded business opportunities\n, • Strong customer engagement skills with a proactive, revenue-driving sales mindset\n\n \n Email resumes to smartin@defensesearchusa.com or call 858.227.4596. \n \n FULL DESCRIPTION: We are seeking a Customer Growth Manager to grow a portfolio of existing customers across distribution, contract manufacturers, and direct end users within a discrete semiconductor and electronic components environment. This permanent, onsite role is responsible for using customer, quote, pricing, product, and pipeline data to identify growth opportunities, increase volume, win new part numbers and programs, reactivate declining business, and pursue opportunities through consistent customer engagement. The ideal candidate will have strong commercial experience, excellent analytical skills, a proactive sales mindset, CRM/ERP experience, and the ability to turn data into action while building strong customer relationships. \n \n The selected candidate will be responsible for: \n\n • Owning sales performance for an assigned customer base\n, • Understanding performance against targets and identifying customers or products contributing to gaps\n, • Taking action to close sales gaps and grow assigned accounts\n, • Growing business by increasing volume on products customers already purchase\n, • Winning new part numbers, new programs, and expanded customer opportunities\n, • Reactivating business that has declined, stopped, or become inactive\n, • Supporting sales efforts focused on commodity semiconductor products with identified market demand\n, • Proactively engaging customers through calls, email, LinkedIn, and other outreach channels\n, • Building relationships across purchasing, engineering, program management, and supply chain contacts\n, • Understanding customer demand, upcoming requirements, target pricing, and competitive alternatives\n, • Managing opportunities from initial quote request through purchase order\n, • Ensuring customers receive accurate and competitive quotes quickly\n, • Following up consistently until opportunities result in an order or a clear reason for loss\n, • Understanding why business is won or lost based on price, availability, lead time, competition, and timing\n, • Sharing win/loss insights to improve pricing, stocking, and sales strategy\n, • Analyzing customer purchase history, quote activity, and product-level data\n, • Identifying where demand is growing, where business has declined, and where share may be lost\n, • Turning analysis into a prioritized plan for selling activity\n, • Evaluating the results of pricing, stocking, and bundling actions\n, • Maintaining accurate customer, contact, opportunity, and quote information in Salesforce\n, • Updating value, likelihood of closing, next steps, and timing within CRM systems\n, • Participating in monthly sales forecasts\n, • Providing leadership with clear visibility into expected business, risks, and actions being taken\n, • Participating in or helping establish a recurring win/loss review process\n, • Supporting pricing, stocking, and sales strategy through trend feedback and performance insights\n, • Providing Pricing and Supply Chain teams with competitor pricing, target pricing, customer requirements, availability needs, lead time needs, and future demand information\n, • Identifying recurring issues that make it harder to win business\n, • Estimating potential lost revenue related to pricing, availability, quote turnaround, or internal process issues\n, • Bringing leadership recommended solutions to improve sales performance\n, • Supporting post-sale order execution when coverage requires it\n, • Processing purchase orders, order acknowledgements, changes, cancellations, returns, and RMAs as needed\n, • Resolving delivery or documentation issues as needed\n, • Supporting day-to-day account servicing, accurate system records, technical inquiries, quality inquiries, and urgent customer needs\n, • Working cross-functionally with sales, pricing, supply chain, operations, customer relationship teams, and leadership\n, • Using Salesforce, quoting tools, analytics tools, AS/400, and related platforms to support customer growth\n, • Performing other duties as assigned\n\n \n The selected candidate will also possess: \n\n • High school diploma or GED required\n, • Associate degree or equivalent experience required\n, • Bachelor's degree preferred\n, • 4+ years of commercial, customer relationship management, inside sales, operations, or related experience required\n, • 5+ years of related commercial, customer relationship management, or operations experience preferred\n, • Experience in inside sales, account growth, customer growth, account management, customer relationship management, or account executive-style roles preferred\n, • Experience with semiconductors, discrete semiconductors, electronic components, industrial products, technical products, or related distribution strongly preferred\n, • Experience selling to or working with distributors, contract manufacturers, direct end users, purchasing teams, engineering teams, program management teams, or supply chain teams preferred\n, • Strong analytical ability required\n, • Ability to interpret data and translate it into meaningful business insight required\n, • Strong commercial and revenue-driving mindset required\n, • Proactive and opportunistic sales approach required\n, • Ability to convert quotes, leads, and customer activity into new or expanded business required\n, • Ability to engage customers directly through calls, emails, LinkedIn, and follow-up activity required\n, • Ability to work in a phone-forward sales role required\n, • Strong cross-functional communication skills required\n, • Ability to explain problems clearly, articulate opportunities, and influence stakeholders across functions required\n, • Ability to balance analytics with interpersonal customer engagement required\n, • Experience with CRM and ERP systems preferred\n, • Salesforce experience preferred\n, • AS/400 experience preferred\n, • Experience with quoting, analytics, sales engagement, or outreach tools preferred\n, • Experience with Salesloft or similar sales execution platforms preferred\n, • Comfort learning new tools and helping build better sales processes\n, • Ability to use customer data, quote data, product data, pricing data, and market information to identify growth opportunities\n, • Understanding of the relationship between sales activity, customer demand, operations, supply chain, and pricing preferred\n, • Ability to maintain accurate customer, opportunity, quote, and pipeline records\n, • Ability to support forecasts, win/loss reviews, customer follow-up, and sales strategy improvement\n, • Strong organization, follow-through, and time management skills\n, • Strong written and verbal communication skills\n, • Ability to work onsite in Hauppauge, NY\n, • Ability to support a full-time, permanent opportunity\n, • No sponsorship available\n\n \n Physical Requirements: \n\n • Ability to sit and work at a computer for extended periods while reviewing customer data, quote activity, product information, CRM records, ERP information, sales reports, forecasts, and analytics\n, • Ability to communicate by phone, email, LinkedIn, video meeting, and in person throughout the workday\n, • Ability to review customer records, pricing information, quote details, purchase history, opportunity data, sales dashboards, reports, and computer screens for extended periods\n, • Ability to use hands and fingers for typing, CRM updates, reporting, documentation, quote follow-up, customer communication, and standard office tasks\n, • Ability to occasionally stand, walk, bend, reach, and move throughout office, sales, warehouse, production, or customer-facing environments as needed\n, • Ability to occasionally lift, carry, or move standard office files, documents, supplies, or small materials as needed\n, • Ability to maintain professionalism, accuracy, and attention to detail while managing customer relationships, sales opportunities, and confidential business information\n\n \n Salary Range: $85,000 to $100,000/year base, with $120,000 OTE \n For immediate and confidential consideration, please email your resume to smartin@defensesearchusa.com or call 858.227.4596. \n More information can be found at www.defensesearchusa.com.

Director of Global Planning Remote | Manufacturing / Electronics Industry About the Opportunity Our client is a global manufacturer of highly engineered products serving industries such as medical technology, semiconductor, industrial systems, and scientific instrumentation. With operations spanning North America, Europe, and Asia, the organization is focused on advancing operational excellence and driving continuous improvement across its global supply chain network. The company is seeking a Director of Global Planning to lead demand planning, production planning, inventory management, material planning, and SIOP initiatives. This individual will play a key role in developing planning strategy, improving processes, enhancing ERP planning capabilities, and leading high-performing teams across multiple locations. Key Responsibilities • Lead global SIOP and planning strategies across multiple manufacturing sites., • Drive continuous improvement in demand planning, supply planning, production planning, inventory management, and materials management., • Develop and optimize planning processes for raw materials, subassemblies, finished goods, and production schedules., • Collaborate with Operations, Supply Chain, IT, and other cross-functional teams to align planning activities with business objectives., • Analyze demand trends, historical data, and forecasting models to improve operational performance., • Establish and monitor KPIs to measure planning accuracy, inventory performance, and scheduling effectiveness., • Improve ERP planning processes and system utilization., • Lead large-scale projects focused on operational excellence and process improvement., • Build, develop, mentor, and manage high-performing planning teams., • Create standardized planning procedures and documentation to drive consistency across locations. Qualifications • Bachelor's degree in Supply Chain, Engineering, Business, or a related field., • 10+ years of supply chain, planning, or operations experience., • 5+ years of leadership experience managing planning teams in a multi-site manufacturing environment., • Strong background in:, • S&OP / SIOP, • Demand Planning, • Supply Planning, • Production Planning, • Inventory Management, • Materials Management, • Experience working in a LEAN manufacturing environment., • Expertise with ERP planning systems and advanced planning tools., • Proven ability to lead organizational change and drive process improvements., • Strong analytical, project management, and problem-solving skills., • Experience partnering with Operations, Manufacturing, and IT organizations., • Ability to travel up to 25%. Preferred Qualifications • MBA or advanced degree., • APICS certification (CPIM, CSCP, or equivalent)., • Experience with ERP planning systems, reporting tools, and business intelligence platforms., • Experience leading planning functions within complex manufacturing environments. Compensation & Benefits • Competitive base salary, • Bonus potential, • Comprehensive benefits package, • Remote work arrangement, • Opportunities for career growth and leadership impact within a global organization Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance

Our client is seeking a motivated and detail-oriented Senior Electrical Engineer to join our engineering team. This senior position is ideal for an engineer who enjoys working across the full product lifecycle—from concept and design through validation and production—while contributing to high-reliability power electronics solutions used in demanding environments such as aerospace, defense, and industrial systems. Job Function: Key Responsibilities • Design, develop, and test analog and power electronic circuits, including AC-DC and DC-DC conversion systems, • Good understanding of DSP based power electronic products, experience in product development / troubleshooting, • Experience in Digital Vector based control of BLDC motors, MATLAB and Simulink would be an asset, • Perform component selection, schematic capture, and PCB layout activities with attention to EMI, thermal performance, and reliability, • Conduct circuit simulation (e.g., SPICE-based tools) and analyze performance under varying electrical and environmental conditions, • Develop and execute validation and qualification test plans, including worst-case analysis and derating, • Troubleshoot hardware issues at the board and system level, including root cause analysis and corrective action implementation, • Collaborate with cross-functional teams including mechanical engineering, manufacturing, and quality assurance, • Support transition from prototype to production, including documentation, test procedures, and manufacturing support, • Participate in design reviews and contribute to continuous improvement of engineering processes, • Heavy interaction with customers to support product development opportunities Job Requirement: Required Qualifications • Bachelor’s degree in electrical engineering or related field, • 7–10 years of relevant industry experience, • Strong foundation in analog circuit design and power electronics, • Experience with schematic capture and PCB layout tools (e.g., Altium or similar), • Experience with lab equipment such as advanced oscilloscopes with optical probes, spectrum analyzers, and power analyzers, • Working knowledge of EMI/EMC principles and mitigation techniques, • Ability to debug circuits and systems methodically and able to work independently, • Strong written and verbal communication skills Preferred Qualifications • Experience designing high-reliability applications (e.g., aerospace, military, or medical), • Familiarity with industry standards such as MIL-STD or IPC guidelines, • Experience with thermal analysis and magnetic component selection, • Exposure to digital control of power converters (e.g., microcontrollers or DSPs), • Understanding of isolation techniques and high-voltage design considerations, • Experience developing embedded firmware and/or PC-based tools (e.g., C/C++, Python, or C#), including simple GUI applications for test, control, or data visualization

Industrial Robotics | Intelligent Manufacturing | Autonomous Factory Systems About iRocket Innovative Rocket Technologies (iRocket) is an aerospace and defense technology company developing advanced propulsion systems, solid rocket motors, and next-generation automated manufacturing capabilities. Our mission is to transform how critical aerospace and defense hardware is manufactured by combining industrial robotics, precision machining, artificial intelligence, machine vision, and intelligent factory automation. We are building a scalable manufacturing platform designed to enable high-rate, repeatable, and increasingly autonomous production. The Opportunity We are seeking an exceptional Senior / Lead Robotics & Automation Engineer to take technical ownership of developing and integrating our next generation of automated manufacturing systems. This is a hands-on engineering position for someone who enjoys building real hardware, writing software, troubleshooting equipment, and taking complex automation projects from concept through commissioning. You will work with industrial robotic arms, CNC machining centers, automated material-handling equipment, machine vision systems, and industrial controls to create integrated production environments. The successful candidate will help develop automation capabilities that connect individual manufacturing cells into an intelligent, coordinated factory. We are looking for a builder and problem-solver, not someone who only manages automation projects. Key Responsibilities Robotics & Industrial Automation • Design, develop, program, integrate, and commission industrial robotic systems for automated manufacturing., • Program and integrate robotic arms, including FANUC, Universal Robots, or comparable industrial robotics platforms., • Develop automated CNC machine tending, robotic loading/unloading, pick-and-place, material handling, and assembly applications., • Design robotic workcells, including tooling, end effectors, sensors, and control interfaces., • Optimize robotic movements, production cycle times, operational reliability, and equipment utilization. Automation, Controls & Software • Develop and integrate industrial automation software, PLC controls, machine interfaces, and supervisory control systems., • Establish reliable communication between robots, CNC machines, sensors, mixers, inspection equipment, and supporting manufacturing systems., • Develop software for machine coordination, equipment status monitoring, workflow sequencing, and fault recovery., • Integrate manufacturing equipment with MES, MRP, ERP, and production data systems., • Support development of centralized factory-management software capable of coordinating multiple automated production cells. Machine Vision & Intelligent Manufacturing • Develop or integrate computer vision systems for automated inspection, part identification, quality verification, and process monitoring., • Implement industrial cameras, sensors, and machine vision software to improve production quality and consistency., • Support AI-enabled monitoring, predictive maintenance, and data-driven optimization as manufacturing data and system maturity allow., • Develop automated data collection and traceability across manufacturing operations. Advanced Manufacturing & System Development • Support development of modular, scalable, and deployable automated manufacturing cells., • Evaluate and integrate autonomous mobile robots (AMRs) and automated material-transport systems where appropriate., • Lead prototype development, integration, debugging, testing, and commissioning., • Collaborate with mechanical, electrical, manufacturing, propulsion, software, and quality engineering teams., • Establish appropriate industrial safety controls, equipment documentation, operating procedures, and validation methods., • Work directly with production equipment and manufacturing personnel to translate engineering concepts into reliable, repeatable manufacturing operations. Required Qualifications • Bachelor's degree in Robotics, Mechanical Engineering, Electrical Engineering, Mechatronics, Computer Engineering, Automation Engineering, or a closely related discipline, or equivalent demonstrated hands-on experience., • 5+ years of relevant professional experience in robotics, industrial automation, manufacturing automation, or mechatronics. Candidates with 10+ years of experience are especially encouraged to apply., • Demonstrated experience personally programming, integrating, and commissioning industrial robots or automated manufacturing equipment., • Strong programming and troubleshooting skills involving robotics and industrial control systems., • Experience with Python, C++, PLC programming, or comparable automation software development., • Working knowledge of industrial sensors, actuators, motor controls, electrical interfaces, and communication protocols., • Experience integrating mechanical, electrical, and software components into functional automated systems., • Ability to independently diagnose equipment, controls, software, and integration problems., • Strong practical engineering judgment and willingness to work directly with hardware on the manufacturing floor. Highly Desired Experience Candidates with experience in one or more of the following areas will receive strong consideration: • FANUC, Universal Robots, ABB, KUKA, or comparable industrial robotic platforms., • Okuma or other CNC machining centers and automated machine-tending applications., • Rockwell / Allen-Bradley, Siemens, or comparable industrial PLC systems., • ROS / ROS2, industrial robot APIs, and robotic motion control., • Machine vision, OpenCV, industrial cameras, or AI-assisted visual inspection., • Autonomous mobile robots, particularly MiR systems and fleet management., • Industrial networking protocols including OPC UA, EtherNet/IP, Modbus, and PROFINET., • Manufacturing Execution Systems (MES), Material Requirements Planning (MRP), and digital manufacturing integration., • Industrial IoT, edge computing, manufacturing telemetry, and digital twins., • Automated assembly, high-volume production, and modular manufacturing., • Aerospace, defense, automotive, semiconductor, or similarly advanced industrial manufacturing environments., • Experience developing automation systems for safety-critical or highly regulated processes. Prior aerospace or rocket propulsion experience is advantageous but not required. We place greater value on candidates who have successfully developed and deployed complex industrial automation systems. What Makes This Opportunity Different Unlike many robotics positions focused on maintaining established systems, this role offers the opportunity to help build an automation platform from the ground up. You will have meaningful technical ownership, direct involvement with advanced manufacturing equipment, and the opportunity to influence the architecture of a growing industrial manufacturing platform. Successful candidates will contribute to systems spanning robotic manufacturing cells, machine vision, intelligent material handling, and factory-wide automation software. Work Location & Availability This position is based exclusively at iRocket's manufacturing facility in Hauppauge, New York. Candidates must be willing to work on-site. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

PROJECT MANAGER / ESTIMATOR Location: West Babylon, NY WHO IS FIRSTCALL MECHANICAL? Select is a commercial HVAC services company based in Long Island, NY. Founded in 1980, Select partnered with FirstCall Group in 2025. FirstCall Group is a leading provider of commercial and industrial HVAC, building controls, electrical, and plumbing services. FirstCall serves a wide array of facility and customer types, including distribution centers, industrial plants, universities, airports, healthcare facilities, self-storage units, and more. With approximately 700 employees across Ohio, New York, Virginia, Tennessee, North Carolina, South Carolina, Georgia, Florida, and Texas, FirstCall is committed to building durable partnerships. The company is actively expanding its operations nationwide and partnering with organizations that share its dedication to quality and customer satisfaction. FirstCall Group not only partners with companies to nurture growth in the market but also provides equal focus on employee growth and development as well. We believe when YOU succeed, we all succeed, so we strive to be the first call for talented team members who want a career, not just a job. BENEFITS OVERVIEW FirstCall Group values our employees' well-being, growth, and success! Employees are offered a robust benefits package, including: • Competitive Weekly Pay, • Comprehensive Healthcare Coverage - Medical, Dental, Vision, + More (Includes some 100% Company-paid plans), • Financial Resources - 401(k) Retirement Savings Plan with a 5% match, Life Insurance, Short & Long-Term Disability, • Time-Off & Holidays - Up to 4 weeks of Paid Off, 9 Paid Holidays + Veterans Day for Veterans, • Career Growth & Development- Company-sponsored education and career advancement programs like the FirstCall Academy, the Learning & Education Assistance Program (LEAP), and the FirstCall Progression Program, • Generous Referral Bonus of $2,500 per referral, • Role-Specific Perks - Company vehicle or allowance, mobile phone or phone allowance, uniforms, and work boot allowances POSITION OVERVIEW We are currently seeking an experienced Project Manager/Estimator to join our fast-growing team. This role will owe the install and project work end-to-end - estimating, planning, scheduling, execution, and closeout - for HVAC and commercial refrigeration installations, retrofits, equipment replacements, and store refresh/renovation projects. Our customers are primarily convenience stores, fuel-retail, and light-commercial accounts across Long Island and the New York metro. This is a hands-on role for someone who can scope and price a job, get the crew and materials lined up, and drive the project to a clean, on-budget finish. JOB RESPONSIBILITIES • Estimate and quote install and project work — HVAC and refrigeration install, retrofits, equipment replacements, and store refresh/renovation projects., • Set up and plan jobs — define scope, order equipment and materials, secure permits, and build the project schedule., • Schedule and coordinate crews — assign and manage install technicians and field labor to keep projects moving (employee logistics)., • Own the project to budget and timeline — track cost vs. estimate, manage change orders, and project profit margin., • Manage materials, equipment, and vendors — purchasing, delivery coordination, and supplier relationships for project work., • Coordinate fleet and equipment logistics needed to execute jobs., • Customer coordination — scope, timelines, approvals, and updates with customers and their facilities teams., • Quality, safety, and code compliance — ensure installs meet spec, code, and safety standards., • Closeout — final walk, documentation, and clean hand-off to billing., • Work in BuildOps — estimates, project tracking, POs, and job costing. ACCOUNTABILITIES • Continual learning and development in the body of knowledge through FirstCall Academy, to ensure we set the bar for skill level in the industry, • Elite level of customer service, to ensure we continue to be the FirstCall our customers make for their HVAC needs ORGANIZATIONAL ALIGNMENT This position reports to the local Operations Manager. QUALIFICATIONS Required: • 5+ years in commercial HVAC and/or refrigeration project management, install management, or estimating., • Proven experience estimating and running install / retrofit / replacement projects with budget and schedule., • Ability to read plans and drawings, scope work, and price it accurately., • Crew scheduling and field coordination experience., • Solid knowledge of commercial HVAC and refrigeration systems., • Strong organization, budget discipline, and customer communication., • Comfortable with project/field software (BuildOps or similar), • Valid drivers license, • Long Island/New York metro based Preferred: • Experience with convenience store, fuel-retail, or multi-site retail projects (e.g., 7-Eleven or similar)., • Hands-on commercial refrigeration depth., • Hands-on commercial refrigeration depth.

Job Title: Software Engineer Location: Hauppauge, NY USA 11788 Duration: Direct Hire Pay Rate: $106,000 -$142,000 plus 12.5% bonus Shift Time: 1st shift Job Details: • Need Embedded SW developer from a Regulated Environment - MUST HAVE, • Must have strong C code -microcontrollers for computation, • Code to black box environment, • Must be familiar software development and design (such as one or some of these DO- 178, ISO 26262, EN 50128, IEC 61508 or IEC 62304) • Not looking for web base development, • Project lead skills are helpful, • No relocation available, • 100% onsite, • Must be a US Citizen, • MUST HAVE project leadership- owning a project start to finish, managing the project and execution. 25% project management 75% development activities. SUMMARY: Seeking an Embedded Senior Software Engineer to join our team. We are looking for a candidate who has working experience designing, developing and verifying embedded software in aerospace and/or industrial applications. The candidate should be familiar with industry-standard software development and design assurance practices (such as DO-178, ISO 26262, EN 50128, IEC 61508 or IEC 62304) and their application across the entire software development lifecycle. FUNCTIONS: Our charter is to develop fuel measurement, management and inerting systems for commercial and defense airframers. The Software Engineering team works closely with the Systems and Electronic Hardware Engineering teams to develop, qualify and certify these technologies as products for our customers in aerospace and industrial markets. The individual will have the following responsibilities (not an inclusive list): • Develop embedded software using C and/or model-based tools such as SCADE, • Develop high level and low level software requirements, • Create requirements-based test cases and verification procedures, • Perform software integration testing on target hardware using both real and simulated inputs/outputs, • Analyze software requirements, design and code to assure compliance to standards and guidelines, • Perform traceability analysis to customer specification requirements to software code, • Participate in software certification audits, e.g. stages of involvement (SOI) REQUIRED: • BS in Software Engineering, Computer Engineering, Computer Science or related field, • 5+ years of experience performing software development, verification and/or integration, • Strong technical aptitude with analytical and problem-solving capabilities, • Excellent interpersonal and communication skills, both verbal and written, • Ability to work in a team environment, cultivate strong relationships and demonstrate initiative HIGHLY PREFERRED: • Experience with C programming language, • Experience with model-based software development using SCADE, • Experience developing embedded software control systems, • Experience planning and executing projects using Agile software development methodology, • Experience managing requirements using DOORS or DOORS Next Gen (DNG), • Experience with digital signal processing or digital filter design, • Experience with ARM microprocessors, • Experience with serial communication protocols (e.g. CANbus, ARINC, RS-232), • Familiarity with aerospace (e.g., DO-178, DO-330, DO-331) and/or industrial (e.g., IEC 61508) software certification requirements, • Familiarity with functional safety standards such as ISO 13489, IEC 61508, IEC 62061, ISO 26262 or ARP4761Software Engineer to join our team., • We are looking for a candidate who has working experience designing, developing and verifying embedded software in aerospace and/or industrial applications. The candidate should be familiar with industry-standard software development and design assurance practices (such as DO-178, ISO 26262, EN 50128, IEC 61508 or IEC 62304) and their application across the entire software development lifecycle.

We are seeking a motivated and detail-oriented Wire Harness Assembler to join our dynamic manufacturing team. In this role, you will be responsible for assembling complex electrical wiring harnesses and electro-mechanical components used in a variety of industrial, automotive, and electronic applications. Your expertise will ensure that each harness meets rigorous quality standards and adheres to detailed blueprints and schematics. This position offers an exciting opportunity to work with cutting-edge technology, develop your skills in electronics assembly, and contribute to innovative product development. Duties • Assemble wire harnesses by following electrical schematics, blueprints, and detailed assembly instructions., • Use hand tools such as wire strippers, crimpers, soldering irons, and power tools to accurately connect wires and components., • Interpret electrical blueprints, schematics, and IPC 610 standards to ensure precise assembly and quality control., • Produce wiring looms and cable assemblies using crimping, soldering, lacing, and splicing techniques following IPC 620 standards, • Build electrical panels and electro-mechanical assemblies by integrating wiring with mechanical parts using surface mount technology (SMT) techniques., • Conduct electrical testing using ohmmeters and other diagnostic tools to verify continuity, resistance, and proper wiring connections., • Troubleshoot assembly issues through engineering troubleshooting methods to resolve wiring or component problems efficiently., • Maintain a clean, organized workspace while adhering to safety protocols related to electrical wiring, soldering, and machining processes. Skills • High school diploma or equivalent, • 3-5 years of experience in wiring and developing wire run listsStrong understanding of PCB (Printed Circuit Board) assembly processes and surface mount technology (SMT)., • Proficiency in reading electrical schematics, blueprints, and technical diagrams for accurate assembly., • Experience with electrical wiring, panel building, and electro-mechanical component integration., • Skilled in using hand tools such as wire strippers, crimpers, soldering irons, power tools, and ohmmeters for testing purposes., • Knowledge of IPC 610 & 620 standards for electronic assemblies to ensure high-quality workmanship., • Ability to interpret engineering troubleshooting procedures for resolving assembly issues quickly., • Familiarity with manufacturing environments involving machining or mechanical assembly processes., • Ability to pass pre-employment background, criminal, and drug screenings Join us as a Wire Harness Assembler if you thrive in fast-paced settings where precision meets innovation! Bring your technical skills and passion for electronics assembly to help us build reliable products that make a difference worldwide. We value safety, quality craftsmanship, and continuous improvement—your expertise will be essential in delivering excellence every step of the way!

The Maintenance Planner is responsible for planning, scheduling, and coordinating preventive, predictive, and corrective maintenance activities to maximize equipment reliability and minimize downtime. This position works closely with Maintenance Supervisors, Mechanics, Purchasing, Operations, and the Tool Crib to ensure labor, materials, parts, and outside services are available before work begins. The Maintenance Planner maintains the Computerized Maintenance Management System (CMMS), oversees maintenance inventory processes, and supports continuous improvement initiatives to improve maintenance eEiciency and equipment performance. Responsibilities: Maintenance Planning & Scheduling • Develop, schedule, and coordinate preventive maintenance (PM) activities for maintenance mechanics based on production schedules and equipment priorities., • Create daily, weekly, and monthly maintenance schedules to optimize labor utilization while minimizing production disruptions., • Prioritize maintenance work orders based on equipment criticality, safety, production requirements, and resource availability., • Coordinate planned maintenance activities with production and maintenance supervisors to ensure equipment availability., • Prepare maintenance work packages that include procedures, labor requirements, parts lists, tools, and safety considerations. CMMS Administration • Maintain and update preventive maintenance schedules within the Computerized, • Maintenance Management System (CMMS)., • Modify PM frequencies, task lists, and procedures based on equipment performance, maintenance history, and reliability improvements., • Ensure work orders are accurate, complete, and properly documented., • Maintain equipment records, asset history, and maintenance documentation within the CMMS., • Generate reports to monitor PM compliance, backlog, and maintenance performance metrics. Parts & Materials Coordination • Work closely with the Purchasing Coordinator to identify and procure parts required for planned maintenance activities., • Review planned work to ensure all required materials and replacement parts are available before scheduling jobs., • Coordinate with Maintenance Supervisors to identify upcoming maintenance needs and associated material requirements., • Assist in developing and maintaining critical spare parts inventories to reduce equipment downtime. Tool Crib & Inventory Management • Oversee daily operations of the maintenance tool crib., • Supervise tool crib attendants to ensure maintenance parts, tools, and supplies are properly issued and charged to work orders., • Monitor inventory accuracy through routine audits and inventory reconciliation., • Ensure maintenance tools and equipment are organized, available, and maintained in good working condition., • Recommend inventory improvements and adjustments to support maintenance operations. Contractor & Service Coordination • Schedule outside contractors, equipment vendors, and service providers for maintenance, repairs, inspections, and facility-related work., • Coordinate vendor-provided equipment service, warranty work, and preventive maintenance visits., • Schedule technical training for maintenance personnel on new equipment, systems, and maintenance procedures., • Communicate scheduling requirements with vendors to ensure timely completion of services. Cross-Functional Collaboration • Meet regularly with Maintenance Supervisors to review planned work, priorities, manpower availability, and scheduling needs., • Coordinate with Operations to minimize production interruptions while completing planned maintenance., • Work closely with Purchasing, Warehouse, and Machine Shop personnel to ensure resources are available before scheduled work begins., • Support maintenance and production teams by resolving scheduling conflicts and adjusting priorities when necessary. Continuous Improvement • Analyze maintenance data to improve preventive maintenance frequencies and job plans., • Identify opportunities to reduce equipment downtime and improve maintenance Efficiency., • Recommend process improvements related to planning, scheduling, inventory management, and maintenance execution., • Support reliability initiatives through standardized maintenance procedures and improved planning practices. Requirements / Competencies: • High school diploma or equivalent required; associate’s degree in industrial Maintenance, Mechanical Technology, Engineering Technology, or a related field preferred., • Three to five years of experience in industrial maintenance, maintenance planning, maintenance supervision, or manufacturing operations., • Experience using Computerized Maintenance Management Systems (CMMS) such as Fiix, Maintenance Connection, SAP PM, Maximo, eMaint, or similar systems., • Experience in manufacturing, food processing, industrial, or heavy equipment maintenance environments preferred., • Strong understanding of preventive, predictive, and corrective maintenance principles., • Working knowledge of industrial mechanical, electrical, hydraulic, pneumatic, and facility systems., • Ability to read equipment manuals, technical drawings, and maintenance documentation., • Strong organizational, planning, and scheduling skills., • Excellent communication and coordination skills across multiple departments., • Ability to prioritize multiple projects in a fast-paced manufacturing environment., • Strong analytical and problem-solving abilities., • Proficiency with Microsoft Office applications, particularly Excel, Outlook, and Word., • Knowledge of inventory control and maintenance storeroom best practices., • Ability to analyze maintenance data and recommend improvements. Performance Expectations Success in this role is measured by: • High preventive maintenance completion and compliance rates., • Effective scheduling that minimizes equipment downtime and production disruptions., • Accurate and timely maintenance planning and work order preparation., • Proper availability of parts, tools, and outside services before scheduled work begins., • Accurate CMMS records and maintenance documentation., • Effective management of tool crib inventory and accountability., • Reduction of maintenance backlog and emergency work., • Strong collaboration with Maintenance, Operations, Purchasing, and Supervisors to support safe and reliable plant operations Physical Requirements: • Primarily office-based with frequent visits to production areas, maintenance shops, warehouses, and the tool crib., • Regular interaction with maintenance personnel, production employees, vendors, and contractors., • May be required to work flexible hours or adjust schedules to support planned shutdowns, emergency repairs, or critical maintenance activities., • Must be able to walk throughout the facility and occasionally lift materials or tools weighing up to 25 pounds.

We are partnering with an established manufacturing company with approximately stable operating history and a strong presence in its market. The organization is looking for a hands-on FP&A Manager who can bring a combination of financial planning, operational analysis, and business partnership to a growing organization. Position Overview The FP&A Manager will play a key role in driving financial planning, P&L management, and operational decision-making across the business. This position is ideal for someone who understands how financial performance connects to purchasing, production, inventory, supply chain, transportation, and retail operations. The successful candidate will take ownership of planning and analysis across the organization, providing leadership with actionable insights around costs, margins, inventory, and overall operational performance. Key Responsibilities • Lead budgeting, forecasting, and financial planning activities across the organization., • Own and analyze P&L performance, identifying trends, variances, risks, and opportunities for improvement., • Provide financial oversight and analysis across planning, purchasing, production, inventory, stock, and transportation., • Develop and maintain detailed cost analysis and operational reporting., • Analyze purchasing and supply chain costs to identify efficiencies and opportunities for margin improvement., • Partner closely with operations, supply chain, purchasing, production, and retail teams to understand business drivers and financial performance., • Analyze inventory levels, turns, costs, and related working-capital considerations., • Build financial models and dashboards that translate operational data into actionable business insights., • Support management with ad hoc financial and operational analysis to drive growth and profitability., • Communicate financial results and recommendations clearly to senior leadership and cross-functional stakeholders., • Help improve planning, reporting, forecasting, and analytical processes as the organization continues to grow. Qualifications • 5+ years of progressive FP&A and P&L experience., • Strong understanding of financial planning, forecasting, budgeting, and variance analysis., • Experience within CPG, manufacturing, supply chain, retail, industrial, or a similar operational environment., • Strong cost accounting/analytics and operational finance experience., • Demonstrated understanding of purchasing, production, inventory, and supply chain processes., • Strong Excel and financial modeling skills; experience working with ERP and business intelligence systems is a plus., • Ability to connect operational activity to financial results and identify opportunities for improved profitability., • Strong communication and presentation skills with the ability to work effectively across departments., • Hands-on, analytical mindset with the ability to operate independently and take ownership., • Someone who is growth-oriented and excited to help an established company continue to scale. Compensation & Opportunity The anticipated compensation is approximately $140,000 base salary plus bonus, with a hybrid work arrangement on Long Island. This is an excellent opportunity for a sharp FP&A professional.

Role Overview As a Customer Service Support Specialist, you will be a primary point of contact for our customers pre- and post-sale. You will combine strong administrative skills with high-level customer interaction, handling everything from order entry and quotes to internal coordination with our production teams. Key Responsibilities: • Order & Quote Management: Accurately enter sales orders, process product quotes, and calculate shipping costs., • Production Coordination: Follow up directly with the Production department to track orders and ensure promised shipping dates are consistently met., • Service & Support: Assign RMA (Return Merchandise Authorization) numbers for incoming service requests., • Customer Interaction: Assist customers with product inquiries, offering friendly, professional support across phone and written communications., • Administrative Operations: Execute day-to-day administrative tasks, including data entry, filing, and system record updates. Qualifications & Work Experience • Communication Skills: Impeccable verbal and written English communication skills, including a strong command of grammar, spelling, and professional tone., • Technical & System Savvy: Comfortable utilizing modern Enterprise Resource Planning (ERP) systems (experience with Sage 100 is a plus, though not required)., • Soft Skills: Friendly and professional demeanor, comfortable handling phone inquiries, strong attention to detail, and a team-player attitude., • Task Management: Highly organized with the ability to multitask, organize paperwork, and re-prioritize responsibilities as needed., • Industry Experience (Plus): Prior experience in a manufacturing, high-tech, industrial, or exporting environment is helpful.

The Purchaser is responsible for procuring maintenance parts, equipment, and services that support daily operations while ensuring cost-effectiveness, timely delivery, and inventory availability. This role works closely with Maintenance, Planning, Inventory, Machine Shop personnel, and domestic and international vendors to maintain optimal stock levels, support scheduled maintenance activities and manage purchasing expenditures. The Purchaser plays a critical role in minimizing equipment downtime by ensuring that required materials are available when needed. Responsibilities: Procurement & Purchasing • Request and evaluate quotations for low-stock, out-of-stock, and special-order maintenance parts., • Source parts, materials, and services from domestic and international suppliers., • Negotiate competitive pricing, lead times, and service agreements to achieve the best overall value for the company., • Create and issue purchase orders (POs) for approved purchases while ensuring compliance with company purchasing policies., • Obtain management approval for purchases exceeding established spending thresholds., • Monitor purchase order status and proactively follow up with vendors to ensure on-time delivery., • Vendor Management, • Build and maintain strong relationships with suppliers to improve pricing, quality, and delivery performance., • Communicate regularly with overseas vendors to obtain quotations, confirm specifications, coordinate shipments, and resolve purchasing issues., • Evaluate supplier performance and recommend alternative vendors when necessary., • Coordinate returns for high-value components requiring rebuilds, repairs, or warranty service. Maintenance Support • Respond to daily purchasing requests from the Maintenance Department for replacement parts, tools, consumables, and operating supplies., • Work closely with Maintenance Planner to procure parts required for preventive maintenance, corrective maintenance, and scheduled shutdowns., • Ensure critical maintenance materials are available to support planned work and minimize production downtime., • Inventory & Stock Management, • Collaborate with the Maintenance Planner to establish and maintain accurate minimum and maximum inventory levels., • Monitor inventory levels and initiate replenishment orders before stock shortages occur., • Coordinate with the Machine Shop to ensure manufactured components are produced for both stock inventory and active maintenance jobs., • Support inventory accuracy through regular review of stock levels and purchasing trends., • Financial & Budget Responsibilities, • Track maintenance purchasing expenditures and maintain accurate spending records., • Review departmental purchasing activity and expenses with management on a regular basis., • Identify opportunities for cost savings through supplier negotiations, standardization, and improved purchasing practices., • Ensure purchasing documentation, quotations, invoices, and purchase orders are complete and properly maintained. Cross-Functional Collaboration • Work closely with Maintenance, Planning, Inventory Control, Accounting, Production, and Machine Shop personnel to support operational goals., • Communicate purchasing status, delivery schedules, and potential delays to stakeholders., • Assist in resolving supply Requirements / Competencies: • High school diploma or equivalent required; Associate's degree in Business, Supply, • Chain, Purchasing, or a related field preferred., • Experience in purchasing, procurement, maintenance storeroom operations, or industrial, • inventory management preferred., • Experience purchasing industrial maintenance parts, MRO supplies, or manufacturing, • equipment is highly desirable., • Familiarity with ERP, CMMS, or purchasing software., • Proficiency in Microsoft Office, particularly Excel and Outlook.Working knowledge of industrial mechanical, electrical, hydraulic, pneumatic, and facility systems., • Strong negotiation and vendor management skills., • Excellent organizational and time management abilities., • Ability to manage multiple priorities in a fast-paced manufacturing environment., • Strong analytical and problem-solving skills., • Excellent verbal and written communication skills., • Attention to detail with a high degree of accuracy., • Ability to read and interpret part descriptions, specifications, and technical, • documentation., • Understanding of inventory management principles, including minimum/maximum stock, • levels., • Ability to work independently while collaborating effectively across departments. Performance Expectations: Success in this role is measured by: • Timely procurement of maintenance parts with minimal impact on equipment downtime., • Competitive pricing and cost savings achieved through supplier negotiations., • Accurate purchase orders and purchasing documentation., • Effective inventory replenishment and maintenance of appropriate stock levels., • On-time delivery performance from vendors., • Budget adherence and accurate reporting of maintenance purchasing expenses., • Strong collaboration with Maintenance, Planning, and Operations teams to support, • reliable plant performance Working conditions: • Frequent communication with suppliers by phone and email, including international vendors across different time zones., • May occasionally lift or move boxes or parts weighing up to 25 pounds. Standard business hours with occasional flexibility are required to support urgent maintenance or production needs.

A Staff Scientist at H2M architects + engineers works alongside experienced scientists and engineers in the remediation, industrial hygiene, and forensics fields to grow your knowledge through onsite fieldwork performing sampling, testing and inspections for asbestos surveys, reviewing and understanding site plans, completing asbestos, mold, lead and indoor air quality inspection reports for insurance companies, private industries and school districts. This role is offered at two levels: Staff Scientist 1 and Staff Scientist 2, reflecting increasing independence, technical responsibility, and decision-making authority. H2M's Industrial Hygiene and Environmental teams help clients identify, evaluate, and manage environmental and occupational health hazards. We assess asbestos, chemicals, lead, mold, and other contaminants, transform brownfields into usable spaces to support regulatory compliance, and improve indoor air quality and safeguard groundwater. Our scientists and technicians deliver practical solutions that promote safe and healthy environments and enhance quality of life. Key Responsibilities • Perform asbestos and/or mold surveys on residential and commercial buildings., • Provide asbestos project monitoring and air sampling, including compliance with on-site field protocols such as chain of custody forms and daily logs., • Analysis tabulation, analysis review/ evaluation, and report writing., • Assistance with lead and other indoor air quality testing., • Follow clear instructions and communicate project updates and/or relevant information with the project team and with clients professionally. Other Responsibilities may include: • Perform soil and groundwater sampling., • Coordinate and oversee soil borings and monitoring well installation., • Provide remediation oversight., • Assist in data management, evaluation, and preparation of technical reports. Education & Qualifications • Bachelor’s degree required with a focus in Environmental Science or related discipline desired., • 0 to 5 years of experience in the environmental consulting field, specifically industrial hygiene., • Staff Scientist 1: 0 to 2 years of environmental consulting experience., • Staff Scientist 2: 2 to 5 years of environmental consulting experience., • The following current certifications are preferred and will be taken into consideration in conjunction with relevant professional experience:, • Asbestos Certifications (NYS DOL): Asbestos Inspector, Asbestos Air Sampling Technician, Asbestos Project Monitor, and Asbestos Project Designer, • Asbestos Certifications (NYC DEP): Asbestos Investigator, • Mold Certifications (NYS DOL): Mold Assessor, • Lead Certifications (USEPA): Lead-Based Paint Inspector, Lead-Based Paint Risk Assessor, • IICRC certifications a plus, • Prior experience dealing with contractors and ensuring compliance with state and city agencies, a plus., • Strong technical skills including field expertise and knowledge of architectural drawings., • Excellent oral and written communication skills, and the ability to work independently with minimal supervision. Additional Requirements • As part of your role, you may be required to work in environments where the use of a respirator is necessary. In such cases, H2M will provide appropriate personal protective equipment (PPE) and ensure compliance with all applicable safety and health regulations. Therefore, you will be required to participate in any necessary respirator fit testing, training, and medical evaluations in accordance with OSHA standards and company policy., • This role requires some travel. Business-related travel may involve visits to project sites, client locations, and other H2M offices and may require the use of a personal vehicle., • This is an exempt, salaried role that may occasionally require flexibility outside standard business hours, including evenings, weekends, and select holidays, to support project schedules, client needs, and business priorities. Compensation & Benefits • The salary range is between $60,000 to $80,000 annually., • Staff Scientist 1: $60,000 to $74,000, • Staff Scientist 2: $66,000 to $80,000, • Comprehensive medical, dental, and vision healthcare coverage., • 401(k) with up to 6% employer match and Profit-Sharing Bonus Program., • Student loan repayment and tuition assistance to support professional accreditation and continuing education., • Paid Time Off (PTO) and Holidays, and flextime to Balance Work and Life., • Access to professional development programs including mentoring, training, and early-career support., • Active Employee Resource Groups including: Diversity & Inclusion, Sustainability, Women’s Initiative, and Young Professionals., • Check out our _. pushing boundaries. redefining design. Apply today and start your journey with H2M. The employment offer may deviate from the published range based on a variety of factors, including but not limited to, experience, specialty, knowledge, education, geography and/or related certifications – not related to any applicant’s characteristics protected by local, state or federal law. Note: The salary or hourly rate indicated does not include other forms of compensation or benefits.

Job Summary The Technology Network Supervisor will lead and supervise a team of information technology professionals while overseeing the design, operation, security, and reliability of Operational Technology (OT) network environments. This role requires deep technical expertise combined with strong leadership and operational management skills. The Technology Network Supervisor will ensure high availability and performance of Operational Technology (OT) networks, support business-critical systems, and drive continuous improvement in network operations, security, and compliance. Experience within utility or industrial environments is highly desirable, as the role may involve supporting mission-critical infrastructure and regulated systems This position works closely with IT leadership, cybersecurity teams, operations, vendors, and other stakeholders to align network strategies with organizational objectives Job Responsibilities • Provide technical leadership, mentoring, and performance management for team members, while collaborating with cross-functional stakeholders to align network services with business and operational objectives., • Lead and supervise a team of network professionals responsible for the design, operation, and support of OT network environments., • Oversee day-to-day network operations to ensure high availability, performance, and reliability across Operational Technology (OT) networks., • Manage and coordinate network-related projects, including upgrades, expansions, and technology refresh initiatives, ensuring delivery on time and within scope., • Proactively identify, assess, and remediate network security vulnerabilities while ensuring audits and compliance with organizational policies, industry standards, and regulatory requirements., • Maintain accurate network asset inventories and oversee lifecycle planning, including capacity planning, vendor management, and end-of-life strategies for network infrastructure., • Work and communicate with a wide range of people including peers, vendors, staff members, broader functional and appropriate business leadership, and others. Consistently demonstrate professional, positive, and approachable attitude/demeanor and discretion. Job Specific Qualifications • Bachelor’s degree in computer science or a related technical field with a minimum of 8 years of experience in enterprise network environments, • A minimum of 3 years of supervisory experience in network technologies, • In-depth knowledge of Network infrastructure technologies., • Strong background in enterprise networking, including network security, LAN, WAN, Wireless, • Familiarity with OT networking standards and architectures like SCADA/DSCADA environments, • Strong communication, interpersonal, and consultative skills, and the ability to work effectively with clients, leadership and employees at all levels., • Strong understanding of ITSM (ITIL) and overall understanding of Infrastructure components., • Demonstrated experience in vendor management in the day-to-day activities related to supporting critical systems., • Excellent analytical and problem-solving abilities, • Strong skills in project and problem management., • Understanding of general IT standards, policies, best practices, guidelines, processes., • Department of Energy’s regulation 10 CFR 810 is required

Embedded Senior Software Engineer Location: Hauppauge, NY | Work: 100% Onsite | Salary: $106K–$142K + 12.5% Bonus Type: Direct Hire/ Full time Job Summary: Seeking a senior embedded software engineer with 5+ years of experience developing embedded software in regulated environments, preferably aerospace or industrial. Key Responsibilities: • Develop and verify embedded software using C and/or SCADE., • Develop requirements, design, coding, integration, and testing., • Perform software verification, traceability, and certification activities., • Work with hardware and systems teams on embedded control systems., • Lead projects from start to finish, managing execution and development (25% project management / 75% development). Requirements: • Strong C programming and microcontroller experience., • Experience with regulated software standards such as DO-178, ISO 26262, IEC 61508, EN 50128, or IEC 62304., • Project leadership experience., • BS in Software Engineering, Computer Engineering, Computer Science, or related field., • Aerospace/industrial embedded experience preferred., • Experience with SCADE, DOORS/DNG, ARM, CANbus/ARINC/RS-232 is a plus.

Pay: $150,000.00 - $210,000.00 per year Job description: The Kulka Group is seeking an experienced and highly motivated Senior Estimator to join our growing commercial construction team. This is a leadership role within our preconstruction department and a critical position within the company. We are looking for someone who has strong technical estimating knowledge, excellent organizational and communication skills, and the ability to lead and manage complex commercial construction estimates from conceptual budgeting through final bid submission. The ideal candidate is proactive, detail-oriented, solution-driven, and capable of managing multiple projects simultaneously while maintaining a high level of accuracy and professionalism. Responsibilities • Lead the estimating and preconstruction process for commercial construction projects across multiple sectors, • Prepare detailed conceptual, schematic, GMP, negotiated, and hard bid estimates, • Perform comprehensive quantity takeoffs and scope analysis, • Review drawings, specifications, and project documents for completeness, constructability, and potential risk, • Solicit, evaluate, and level subcontractor and vendor proposals, • Develop value engineering recommendations and cost-saving strategies, • Assist with budgeting, procurement and subcontractor buyouts, • Participate in client meetings, preconstruction meetings, and design coordination discussions, • Mentor and assist junior estimators and estimating staff, • Maintain and strengthen subcontractor and vendor relationships, • Collaborate closely with Operations, Project Management, and Executive Leadership teams, • Help develop and improve estimating systems, processes, and historical cost databases Qualifications • 10+ years of commercial construction estimating experience preferred, • Strong understanding of construction means and methods across multiple asset classes, • Ability to prepare and manage large, complex estimates independently, • Excellent communication, organizational, and leadership skills, • Strong analytical and problem-solving abilities, • Ability to manage multiple deadlines in a fast-paced environment, • Proficiency in Microsoft Office and estimating software platforms, • Experience with conceptual estimating, GMP development, and value engineering, • Bachelor’s degree in Construction Management, Engineering, Architecture, or related field preferred What We Value At Kulka, we place a major emphasis on professionalism, accountability, communication, teamwork, and delivering a world-class client experience. We are looking for individuals who take ownership, think strategically, and want to help build and improve systems as the company continues to grow. We are not simply looking for someone to put numbers together — we are looking for someone who can think critically, identify risk, create value for clients, and help drive the long-term success of the organization. About Kulka Kulka is a Long Island-based commercial construction and development company with over 52 years in business, specializing in industrial, multifamily, educational, hospitality, self-storage, office, and commercial construction projects. Our Core Values Focus Reliability Integrity Transparency Tenacity Build Your Dream Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Education: • Bachelor's (Preferred) Experience: • Construction estimating: 10 years (Preferred) Work Location: In person

Our client seeks a motivated, detail-oriented Electrical Engineer (Mid-Level) to join our engineering team. This mid-level position is ideal for an engineer who enjoys working across the full product lifecycle—from concept and design through validation and production—while contributing to high-reliability power electronics solutions used in demanding environments such as aerospace, defense, and industrial systems. Job Function: Key Responsibilities • Design, develop, and test analog and power electronic circuits, including AC-DC and DC-DC conversion systems, • Perform component selection, schematic capture, and support PCB layout activities with attention to EMI, thermal performance, and reliability, • Conduct circuit simulation (e.g., SPICE-based tools) and analyze performance under varying electrical and environmental conditions, • Develop and execute validation and qualification test plans, including worst-case analysis and derating, • Troubleshoot hardware issues at the board and system level, including root cause analysis and corrective action implementation, • Collaborate with cross-functional teams including mechanical engineering, manufacturing, and quality assurance, • Support transition from prototype to production, including documentation, test procedures, and manufacturing support, • Participate in design reviews and contribute to continuous improvement of engineering processes, • Interface with customers for product deployment Job Requirement: Required Qualifications • Bachelor’s degree in Electrical Engineering or related field, • 3–7 years of relevant industry experience, • Strong foundation in analog circuit design and power electronics, • Experience with schematic capture and PCB layout tools (e.g., Altium or similar), • Familiarity with lab equipment such as oscilloscopes, spectrum analyzers, and power analyzers, • Working knowledge of EMI/EMC principles and mitigation techniques, • Ability to debug circuits and systems methodically, • Strong written and verbal communication skills Preferred Qualifications • Experience designing for high-reliability applications (e.g., aerospace, military, or medical), • Familiarity with industry standards such as MIL-STD or IPC guidelines, • Experience with thermal analysis and magnetic component selection, • Exposure to digital control of power converters (e.g., microcontrollers or DSPs), • Understanding of isolation techniques and high-voltage design considerations, • Experience developing embedded firmware and/or PC-based tools (e.g., C/C++, Python, or C#), including simple GUI applications for test, control, or data visualization

FlexStaff is seeking a Senior Quality Technician for our client, an aerospace and industrial manufacturing company located in Deer Park, NY. This is a permanent, full-time opportunity. In this role you will be performing advanced CMM inspections, develop and modify inspection programs, interpreting complex engineering drawings and Geometric Dimensioning and Tolerancing requirements, and providing technical guidance to other Quality personnel. Requirements: • Minimum 5 years of experience in Quality, Inspection, Metrology, or precision manufacturing., • Strong hands-on CMM operating and programming experience, • Demonstrated ability to independently develop, modify, troubleshoot, and execute CMM inspection programs., • Strong knowledge of GD&T., • Ability to interpret complex engineering drawings and specifications., • Strong experience with precision measurement equipment., • Experience with First Article, in-process, and final inspection., • Experience investigating nonconformances and supporting root-cause/corrective-action activities. What You’ll Do: • Perform first article, in-process, and final inspections of precision parts and assemblies., • Operate, program, troubleshoot, and maintain CMM equipment and inspection programs., • Interpret drawings, GD&T, specifications, and customer requirements to define inspection methods., • Review results, documentation, and records for accuracy, traceability, and compliance., • Partner with Manufacturing, Engineering, Purchasing, and suppliers to resolve quality issues., • Investigate nonconformances, support root cause analysis, and drive corrective actions., • Provide technical guidance and training to quality staff., • Support audits, ISO 9001:2015, calibration, and Quality Management System activities., • Assist with customer quality requests, complaints, and inspection documentation., • Identify risks and support continuous improvement in quality, productivity, and process stability.

Property Controller | Commercial Assets | REMOTE A successful commercial real estate management firm seeks a Property Controller to oversee a portfolio of assets. Property Controller will be responsible for overseeing all facets of property accounting and financial reporting for a portfolio of commercial office, industrial and retail properties. In addition, the Controller will have ongoing contact with the principals, senior management, and will interface with property operations, legal, insurance, and certified public accounting firms. The ideal candidate will have experience and business acumen to reverse inefficiencies, optimize organizational controls, and drive cost savings. Responsibilities: • Prepare and review property-level financial statements for a commercial real estate portfolio., • Perform month-end close procedures and review of monthly reporting package., • Prepare CAM and tax reconciliations., • Prepare, review and analyze property level annual budgets., • Prepare workpapers and participate in the annual audits., • Supervise the day-to-day accounting and financial reporting associated with a commercial real estate portfolio., • Analyze mortgage, partnership, and cash management agreements, as well as commercial leases to determine proper accounting., • Assist with special projects as needed. Qualifications: • BA in Accounting / Finance or relevant discipline., • 6+ years of experience with property accounting required., • Proficiency with Yardi or similar real estate accounting software required., • Exceptional organizational, interpersonal and communication skills., • Ability to prioritize and work in a fast-paced, multi-faceted environment., • Be able to multi-task and be a team player. Compensation: Base salary 110,000 – 130,000 plus bonus, 401k match and comprehensive health benefits and other valuable perks. The above salary range represents Advice's good faith and reasonable estimate of the possible base compensation range at the time of posting and is not reflective of the total compensation package, which may also include benefits, equity and other non-cash incentives. Please send your resume for immediate consideration to: nlipari@adviceny.com If you are not currently interested, but know someone who might be, please feel free to forward this ad along to that individual. Referrals are always greatly appreciated. Advice Personnel Celebrating over 40 years as New York’s premier boutique recruiting & staffing specialists.

Industry One Realty Corp is looking for aggressive go getters to become Commercial Real Estate Salespeople. (Long Island - Nassau & Suffolk Counties) Aggressive Hard Working Commercial Real Estate Agents who work Full time typically earn as much as attorneys if not more. We are looking for good candidates who fit the criteria. We are offering a weekly salary for new hires of $1,000 during the training and settlement period so basically it is almost like getting paid to go to law school. This Salary Period can last upto 12 Weeks if the Candidate Meets Goals Each Week Candidates should • Have some previous sales experience, • Be ok with going door to door in the Industrial Parks looking for owners who may want to sell or lease their buildings or relocate to a different property (Must have vehicle to get around), • Have accountability and monitoring for door to door canvassing, • Since this is a salary position you will be expected to work a full time schedule Mon-Fri 8:30am-5pm for the first 3 months Job Type: Full-time Pay: $1,000 a week salary for high energy & aggressive salespeople who are determined to make a lot of money. LIMITED TIME OFFER as after Training Agents will be purely on Commission Basis Please note that most Real Estates Agents typically do not get a salary so being purely commission is customary. To learn more please watch our video at https://www.industryone.com/careers/

Join Hitemco, a Lincotek Company For over 50 years, Hitemco, part of the Lincotek Group, has provided advanced surface coating solutions for critical components serving the Aerospace, Energy, Industrial Gas Turbine, Biomedical, and Transportation industries. If you're passionate about manufacturing, process improvement, ERP implementation, and solving production challenges, we'd love to hear from you. Position Summary We are seeking a Project Engineer (SAP Implementation Engineer) to develop, improve, and support manufacturing processes, with a strong focus on ERP/MRP systems and SAP implementation. This role will drive process optimization, tooling, manufacturability, process documentation, and continuous improvement while partnering closely with Production, Engineering, and Quality teams. What You'll Do • Develop and improve manufacturing processes, work instructions, and production travelers., • Optimize processes to improve efficiency, throughput, cost, and manufacturability., • Support ERP/MRP implementation, system improvements, and manufacturing data management, including SAP., • Conduct time studies and value stream mapping to identify opportunities for improvement., • Apply Lean Manufacturing and Six Sigma principles to manufacturing processes., • Support tooling and fixture design., • Partner with Engineering on new product introduction and process development., • Troubleshoot manufacturing issues and implement corrective and preventive improvements., • Analyze production data to identify opportunities for greater efficiency and process control., • Document and implement process and engineering changes., • Collaborate with Production and Quality teams to resolve process-related issues., • Support compliance with Aerospace, ITAR, government specifications, ISO 9001, NADCAP, and customer requirements., • Promote a safe, efficient, and continuously improving manufacturing environment. Qualifications • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or a related field., • Proven experience in process engineering, manufacturing process optimization, and continuous improvement., • Demonstrated experience applying Lean Manufacturing principles., • Familiarity with Six Sigma methodologies., • Experience conducting time studies and value stream mapping., • Knowledge of government specifications, industry standards, and qualification requirements., • Strong understanding of manufacturing processes, GD&T, and blueprint interpretation., • Experience with root cause analysis and process improvement., • Experience supporting tooling and fixture design., • Advanced Microsoft Excel skills and strong analytical and problem-solving abilities., • Ability to meet applicable ITAR eligibility requirements. Preferred Experience • Hands-on experience implementing multiple ERP/MRP systems, including SAP, is highly preferred., • Consistent experience working in Aerospace and ITAR-regulated manufacturing environments., • Experience with thermal spray coatings or diffusion heat treat., • Familiarity with CAD software., • Experience in ISO 9001 and/or NADCAP environments., • Knowledge of process capability, statistical process control (SPC), and manufacturing data analysis. Apply Today If you have a background in manufacturing engineering, ERP/SAP implementation, and continuous improvement, we encourage you to apply.

Hi, We are working with a Direct Client who are into Integrated Circuits Manufacturing domain. They need a Full Time SAP MM Specialist resource. Designation: SAP MM Specialist Tenure: Full Time Role with Client- Benefits covered Location: Melville, NY No C2C Or Vendor Candidates and only W2 folks Our client designs, manufactures and distributes integrated circuits, modules, and sub-systems for high-performance radio frequency (RF) and microwave applications. With design, sales and manufacturing locations in over 30 countries, The’ products are used in a range of wired and wireless communications applications. Our products are also used in detection, measurement and imaging applications, including military communication, guidance and electronic countermeasure systems, commercial, scientific, military land, sea and aircraft; automotive systems, medical systems, and industrial test equipment. Position Summary: We are seeking a highly skilled SAP Materials Management (MM) Solution Specialist with expertise in SAP S/4HANA Cloud implementations and deep knowledge of SAP Activate methodologies. The ideal candidate will be responsible for designing, configuring, and optimizing SAP MM solutions to support procurement and inventory management processes and enhance overall efficiency. This role requires a strategic thinker who can collaborate with cross-functional teams to deliver high-quality SAP implementations. Job Function: • Lead and participate in SAP S/4HANA Cloud implementations, focusing on SAP MM module configurations and best practices., • Utilize SAP Activate methodology to drive project execution, including discovery, prepare, explore, realize, deploy, and run phases., • Analyze business requirements and translate them into functional specifications and solution designs., • Configure SAP MM functionalities, including procurement, inventory management, vendor evaluation, material valuation, and invoice verification., • Provide expertise in integration with other SAP modules such as FI, SD, and PP to ensure end-to-end process efficiency., • Collaborate with key business stakeholders to conduct workshops, user training, and change management activities., • Support system testing, including unit testing, integration testing, and user acceptance testing (UAT)., • Troubleshoot and resolve complex issues, providing post-go-live support and continuous improvements., • Keep up to date with the latest SAP S/4HANA functionalities and industry best practices. Let me know if you are available and interested to know more about the role and client. Rupanshu Rawat- Senior Manager- Recruitment & Delivery

JESCO is a premier dealer of heavy construction equipment and technology in the Northeast and Mid-Atlantic regions. We proudly represent John Deere, Wirtgen, Kleeman, Vögele, Hamm, Ditch Witch, Magni, Topcon, and many more products for purchase, rental, parts, and service. Family-owned and operated for more than 50 years, we are hiring to grow our award-winning company! Why JESCO: Join a growing team with a lucrative opportunity in equipment sales. Driven sales professionals will have the ability to achieve uncapped commissions. Apply today and start a long term career with the Down to Earth Equipment People of JESCO! Position Summary The Territory Manager is responsible for the direct sale of new, used and rental of John Deere Construction and Forestry Machinery, Compact Construction Equipment, and Allied Products to assigned accounts. Responsible for all sales activities, from lead generation through quote and close. Build and maintain strong customer relationships focusing on long term mutual growth. Key Responsibility Areas (KRA) • Track construction bid results to identify opportunities with existing accounts and prospects., • Determine customer needs and select applicable equipment configurations to meet customers’ technical requirements and applications., • Perform trade evaluations on new quote opportunities., • Perform price calculations and generate customer quotations., • Write bid specifications that favor John Deere and Allied Products, • Perform product demonstrations to prospective buyers while effectively communicating features and benefits of our products and services., • Perform Operation & Maintenance training on new equipment deliveries., • Attend and participate in trade shows, conferences and other industry related networking events., • Maintain awareness of pertinent client information including key influencers and decision makers, future purchasing plans, payment or financing preferences and fleet profiles., • Maintain records of customer communications, personal visitations and opportunities in the company CRM system., • Communicate any client information that may affect company decisions to appropriate department personnel as needed., • Assist in the resolution of outstanding accounts receivables or other client concerns or disputes., • Maintain knowledge of competitor’s products and identify and report intelligence on competitors pricing or marketing strategies to management and peers., • Submit a verity of sales reports as required including activities, opportunities, deals pending and adherence to goals., • Maintain current knowledge of JESCO products., • Understand and comply with established guidelines that ensure a safe and healthy work environment., • PERFORM other related duties as assigned. Performance Measures • New and Used Equipment Sales, • Rental Revenue, • Gross Profit Margin Achieved, • Market Share, • Number of New Accounts, • Call Frequency Achievement, • Trade Appraisal Detail & Accuracy, • Conflict Resolution, • Product & Selling Skills Learning, • Timely and Accurate Sales Reporting Knowledge and Skill Requirements • Bachelor’s degree., • Five years of proven outside sales experience., • Knowledge of construction and/or industrial equipment operation and applications., • Strong interpersonal and oral communication skills., • Strong presentation skills and professional appearance., • Excellent planning and organizational skills., • Strong written communication skills with exceptional presentation, negotiation and business acumen., • Proficiency in Microsoft Office products and CRM systems., • High energy, excellent self-motivation and work ethic. Physical Requirements • Candidates are expected to occasionally operate, demonstrate, climb up and down and walk around the equipment in order to sell to customers., • Candidates should have the physical ability to evaluate equipment for trade. This includes climbing on the equipment and operating the equipment., • Candidates will be expected to drive a vehicle and cover a particular assigned territory. Driving in a vehicle may be up to 80% of their day., • Candidates must be able to travel by air to attend any Sales related or professional development events or as required by the company., • Candidates should be able to complete at least six to ten effective customer visits per day., • Candidates should be able to lift and carry 50 pounds., • Candidates should be able to walk on uneven surfaces and terrain, work in construction site environments in order to meet with customers on jobsites., • Valid Driver’s License - must meet insurance underwriting requirement We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Electrical Engineer — PCB Design, Data Acquisition & Test Instrumentation. Location: Hauppauge, New York; Texas placement may be considered Employment: Full-time, on-site Level: Recent graduate through experienced engineer iRocket is seeking a hands-on Electrical Engineer to develop electronic hardware and instrumentation supporting our solid rocket motor and rocket engine test facilities. We are looking for someone who has designed, built, and tested working circuit boards—particularly boards involving digital-to-analog converters (DACs), analog-to-digital converters (ADCs), sensor interfaces, or data acquisition (DAQ). Recent electrical engineering graduates with strong laboratory, internship, capstone, or personal-project experience are encouraged to apply. What you’ll do • Design and develop custom PCBs for instrumentation, sensor interfaces, analog inputs and outputs, and test equipment., • Take boards from component selection and schematic capture through PCB layout, fabrication, assembly, bring-up, and troubleshooting., • Integrate measurement hardware with sensors, laboratory instruments, and test software., • Develop embedded firmware and software tools for hardware communication, data logging, and automated equipment checks., • Troubleshoot electrical noise, grounding, shielding, signal integrity, and measurement accuracy., • Create wiring diagrams, bills of materials, test procedures, calibration records, and engineering documentation., • Collaborate with mechanical, software, and test engineers to commission and maintain reliable test instrumentation. Required qualifications • Bachelor’s degree in Electrical Engineering, Computer Engineering, or a closely related field., • Demonstrated experience designing and testing at least one physical PCB. University and personal projects qualify., • Understanding of analog and digital circuits, ADCs/DACs, operational amplifiers, filtering, and power supplies., • Experience with Altium Designer, KiCad, OrCAD, or comparable PCB design software., • Ability to use oscilloscopes, multimeters, bench power supplies, and other laboratory equipment., • Familiarity with embedded programming or hardware automation using C/C++, Python, LabVIEW, or similar tools., • Strong troubleshooting skills and a willingness to work directly with hardware. Preferred experience • Custom DAC/ADC boards, mixed-signal electronics, or multichannel DAQ systems., • Sensor signal conditioning and precision measurement., • NI hardware, LabVIEW, or comparable instrumentation platforms., • Microcontrollers and interfaces such as SPI, I²C, UART, CAN, or Ethernet., • Cable harnesses, connectors, instrumentation cabinets, and industrial electrical systems., • Aerospace, automotive, robotics, industrial automation, or university propulsion/test teams., • Experience with propulsion, energetics, or hazardous test environments is a strong plus.

A Senior Project Water and Wastewater Engineer at H2M architects + engineers oversees and mentors staff engineers and develops and executes water/wastewater design work for both public and private clients. As well as coordinates efforts of both in-house and outside teams that handle architectural, structural engineering, MEP design, and civil engineering services. This role is offered at two levels: Senior Project Engineer 1 and Senior Project Engineer 2, reflecting increasing independence, technical responsibility, and decision-making authority. With over 90 years of experience in water and wastewater engineering, H2Ms water and wastewater team designs and implements drinking water treatment systems, distribution networks, wastewater treatment facilities, pump stations, and collection systems. We support water districts, municipalities, and regional authorities in meeting regulatory requirements and improving system reliability and environmental performance. Our work protects public health, enhances sustainability, and ensures essential services remain resilient for the communities that depend on them. Key Responsibilities Key Project Leadership & Management • Manage and lead medium to large infrastructure projects from inception through planning, design, permitting, bidding, and construction., • Oversee project scope, schedule, budget, and delivery to meet established performance goals., • Function as Project Manager with responsibility for technical production, team coordination, and overall project execution., • Prepare and manage cost estimates, project schedules, and design tasks to ensure on-time, on-budget completion., • Lead construction administration and supervise construction observation efforts. Technical Engineering & Design • Plan, design, and oversee construction of water and wastewater conveyance systems, including pipelines, pump stations, storage facilities, treatment systems, and related infrastructure., • Prepare comprehensive engineering construction packages, including drawings, specifications, and bid documents., • Perform detailed engineering analysis and calculations, leveraging design software to solve complex technical challenges., • Lead planning and design efforts for water supply, treatment, distribution, and wastewater systems. Permitting, Bidding & Regulatory Coordination • Prepare and deliver permit applications to local, state, and federal regulatory agencies., • Assist clients with public and private bidding procedures and participate in bid evaluations., • Coordinate project execution with internal technical divisions, external partners, subcontractors, and regulatory authorities. Client Engagement & Business Development • Support the preparation of proposals, including technical writing, scope development, and budget preparation., • Engage directly with municipal, industrial, and private-sector clients to support project development and ongoing relationships., • Participate in marketing planning, client presentations, and interviews for prospective projects., • Represent the firm through outreach to technical societies, industry groups, and trade organizations. Team Leadership & Mentorship • Supervise, mentor, and support engineering and design/drafting staff, fostering technical development and project excellence., • Lead multidisciplinary project teams and build the team's overall technical capabilities. Education & Qualifications • Bachelor's degree in civil, environmental, chemical, or mechanical engineering or related field of study., • 10+ years of progressive experience in the planning, design, permitting, and construction of municipal water and wastewater infrastructure, including conveyance systems, treatment facilities, and pump stations., • Senior Project Engineer 1: 10 to 12 years of engineering experience with a focus in water/wastewater projects., • Senior Project Engineer 2: 12 to 15 years of engineering experience with a focus in water/wastewater projects., • P.E. license in the states H2M does business, or ability to gain reciprocity, • Experience working on both public and private water/wastewater projects., • Proven background in delivering multi‑discipline infrastructure projects and navigating NYSDOH/NJDEP permitting processes., • Experience preparing, reviewing, and approving engineering proposals, drawings, specifications, schedules, and cost estimates., • Demonstrated experience overseeing projects through commissioning and startup phases., • Proficiency with engineering software and tools required for design, analysis, and project delivery., • Ability to mentor and train junior engineering and technical staff., • Active participation in relevant industry organizations (e.g., AWWA, WEF) preferred., • Strong data analysis and technical problem-solving abilities., • Strong interpersonal, communication (oral and written), and client relationship management skills. Additional Requirements • This role requires some travel. Business-related travel may involve visits to project sites, professional events, client locations, and other H2M offices and may require the use of a personal vehicle., • This is an exempt, salaried role that may occasionally require flexibility outside standard business hours, including evenings, weekends, and select holidays, to support project schedules, client needs, and business priorities. Compensation & Benefits • The salary range is between $115,000 to $165,000 annually., • Senior Project Engineer 1: $115,000 to $145,000, • Senior Project Engineer 2: $130,000 to $165,000, • Comprehensive medical, dental, and vision healthcare coverage., • 401(k) with up to 6% employer match and Profit-Sharing Bonus Program., • Student loan repayment and tuition assistance to support professional accreditation and continuing education., • Paid Time Off (PTO) and Holidays, and flextime to Balance Work and Life., • Access to professional development programs including mentoring, training, and early-career support., • Active Employee Resource Groups including: Diversity & Inclusion, Sustainability, Women’s Initiative, and Young Professionals., • Check out our _. pushing boundaries. redefining design. Apply today and start your journey with H2M. The employment offer may deviate from the published range based on a variety of factors, including but not limited to, experience, specialty, knowledge, education, geography and/or related certifications – not related to any applicant’s characteristics protected by local, state or federal law. Note: The salary or hourly rate indicated does not include other forms of compensation or benefits.

Legrand has an opportunity for a Continuous Improvement / Manufacturing Engineer to join the Data Center Power & Control Team in Farmingdale, NY (centrally positioned on Long Island and easily accessible from both Nassau and Suffolk Counties). The CI Manufacturing Engineer develops, implements, and maintains manufacturing processes to support existing and new products. The role supports team-based process improvement efforts to ensure manufacturing processes meet requirements for capability, safety, quality, customer service, and reliability. What Will You Do? • Design, improve, maintain, and implement manufacturing processes based on input from manufacturing leadership, maintenance activities, operators, and direct observation., • Plan and define sequences of operations to fabricate and assemble parts and products, including development of equipment layouts, material flow, and workspace organization to improve efficiency., • Train maintenance and production personnel on new and revised process procedures to support consistent and repeatable production., • Maintain process documentation in accordance with established standards., • Establish and maintain preventive maintenance schedules for all processes and equipment., • Develop manufacturing process plans to meet all manufacturing requirements for safety, ergonomics, process capability, quality and cost., • Present process concepts, implement approved solutions, and manage work to schedule and budget expectations., • Lead and support continuous improvement initiatives, including lean manufacturing activities, to improve safety, cost, ergonomics, quality, and process capability., • Monitor processes for compliance with safety, environmental, and regulatory requirements through audits and process controls., • Communicate findings, take corrective actions and design/implement engineered solutions to maintain compliance, • Monitor production quality and ensure processes consistently meet required quality standards., • Troubleshoot and resolve production-related engineering issues., • Provide leadership and guidance to manufacturing engineering and production team members on issues related to product manufacturability, • Other duties as assigned Education: Bachelor’s Degree in Industrial Engineering, Manufacturing Engineering or Mechanical Engineering or a related field with relevant experience is required. Experience: • 4 plus years of experience in continuous improvement and/or manufacturing engineering, • Metal fabrication experience is preferred Skills/Knowledge/Abilities: • Effective communication skills both verbal and written are required, • Requires strong organizational and time management skills, close attention to detail and be able to effectively handle multiple priorities, • Independent judgment is required to plan, prioritize, organize and accomplish a diversified workload, • Strong computer skills, proficient with word processing, spreadsheet and presentation software, e-mail and meeting management software. Ability to use internet and web-based resources efficiently and effectively, • Must be highly collaborative and able to work in a team-based environment, • Promotes an environment that is encourages cohesiveness and fosters trust and open communication with team, peers and all business partners, • Must possess strong analytical skills and the ability to identify trends and establish proactive corrective actions, • Must be able to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems, • Must be an effective listener, able to maintain focus extract necessary information and validate understanding of the information, • Must possess excellent project management skills, including demonstrated ability to develop and manage to a project plan, establish priorities, work to deadlines and control a number of projects at various stages of work, • Open to minimal travel as needed - possibly for trade shows, training or visiting suppliers Salary and Benefits: $90,000 - $110,000 LNCA offers comprehensive medical, dental and vision coverage, as well as distinctive benefits like a high employer 401K match, above-benchmark paid maternity and parental leave, paid time off to volunteer, and an active/growing Employee Resource Group network. LNCA is an employee-centered, growing company with tremendous opportunity

Job Title: Embedded Senior Software Engineer Work Location: Hauppauge, NY Salary: $106,000 -$142,000 plus 12.5% bonus RPO Direct Hire • Need Embedded SW developer from a Regulated Environment - MUST HAVE, • Must have strong C code -microcontrollers for computation, • Code to black box environment, • Must be familiar software development and design (such as one or some of these DO-178, ISO 26262, EN 50128, IEC 61508 or IEC 62304), • Not looking for web base development, • Project lead skills are helpful, • No relocation available, • 100% onsite, • MUST HAVE project leadership- owning a project start to finish, managing the project and execution. 25% project management 75% development activities. SUMMARY: We are seeking an Embedded Senior Software Engineer to join our team. We are looking for a candidate who has working experience designing, developing and verifying embedded software in aerospace and/or industrial applications. The candidate should be familiar with industry-standard software development and design assurance practices (such as DO-178, ISO 26262, EN 50128, IEC 61508 or IEC 62304) and their application across the entire software development lifecycle. FUNCTIONS: Our charter is to develop fuel measurement, management and inerting systems for commercial and defense airframers. The Software Engineering team works closely with the Systems and Electronic Hardware Engineering teams to develop, qualify and certify these technologies as products for our customers in aerospace and industrial markets. The individual will have the following responsibilities (not an inclusive list): Develop embedded software using C and/or model-based tools such as SCADE Develop high level and low level software requirements Create requirements-based test cases and verification procedures Perform software integration testing on target hardware using both real and simulated inputs/outputs Analyze software requirements, design and code to assure compliance to standards and guidelines Perform traceability analysis to customer specification requirements to software code Participate in software certification audits, e.g. stages of involvement (SOI) REQUIRED: BS in Software Engineering, Computer Engineering, Computer Science or related field 5+ years of experience performing software development, verification and/or integration Strong technical aptitude with analytical and problem-solving capabilities Excellent interpersonal and communication skills, both verbal and written Ability to work in a team environment, cultivate strong relationships and demonstrate initiative HIGHLY PREFERRED: Experience with C programming language Experience with model-based software development using SCADE Experience developing embedded software control systems Experience planning and executing projects using Agile software development methodology Experience managing requirements using DOORS or DOORS Next Gen (DNG) Experience with digital signal processing or digital filter design Experience with ARM microprocessors Experience with serial communication protocols (e.g. CANbus, ARINC, RS-232) Familiarity with aerospace (e.g., DO-178, DO-330, DO-331) and/or industrial (e.g., IEC 61508) software certification requirements Familiarity with functional safety standards such as ISO 13489, IEC 61508, IEC 62061, ISO 26262 or ARP4761Software Engineer to join our team. We are looking for a candidate who has working experience designing, developing and verifying embedded software in aerospace and/or industrial applications. The candidate should be familiar with industry-standard software development and design assurance practices (such as DO-178, ISO 26262, EN 50128, IEC 61508 or IEC 62304) and their application across the entire software development lifecycle.

Position: Maintenance Supervisor Department: Maintenance Reports to: Maintenance Manager About the Company: Water Lilies Food, LLC is a private equity-backed manufacturer and distributor of premium Asian-inspired food.Established for 30 years, the company moved in 2020 to a new state-of-the-art facility in Bay Shore, NY (Suffolk County Long Island) and is experiencing rapid growth. We are developing and supplying product for some of the leading retailers, wholesalers, and branded Asian-appetizer businesses. Our Vision is to be the preferred supplying partner of premium Asian-inspired food.We achieve this by living up to our Mission to deliver our products and services with attention to detail, a continuous improvement mindset, agility, and authenticity. Our culture is a place where employees can have a meaningful impact on the business and organization. We work collaboratively and humbly strive to get better every day while being respectful of all talents and backgrounds. The company is embarking on another major expansion project and is expecting to more than double the business in the next 3-5 years. Job Summary: The Maintenance Supervisor reports directly to the Senior Maintenance Manager. The individual is responsible for being the liaison between the Maintenance Manager and the Maintenance Crew with collaboration with the Maintenance Planner and PM schedule. The Maintenance Supervisor is also responsible for interacting with and supporting plant personnel, enforcing all maintenance procedures, executing, and maintaining all employee safety policies, manufacturing safety policies and associated administrative policies. The Maintenance Supervisor is expected to be a role model for the company culture. Participates as a functional maintenance department and is a driving force to coordinate with the supervisors on other shifts and other departments. Responsibilities: • Directs maintenance personnel to ensure that all systems operate at their highest capability to meet required production schedules, quality, costs and schedule priorities, • Improves reliability, maintenance, and processing methods to reduce cost and avoid loss of production because of equipment malfunction or failure time., • Determines equipment capabilities, safety, and operational condition in coordination with the other Supervisors and technicians., • Develop preventative maintenance procedures that are cost effective and increase the operational life of the equipment., • Seek and implement continuous improvement of the process through equipment improvement modifications., • Assist in the development of the system and operational standards and corrective actions., • Develops, implements, and reviews regularly, site-specific maintenance logs for department., • Coordinates, arranges, and supervises, or provides for the completion of corrective and preventive maintenance in accordance with company operating procedures, practices and financial considerations., • Provide maintenance training to include the effective utilization of the maintenance logs, completion of routine maintenance specific to facility, equipment operations and support., • Assists workers in diagnosing malfunctions in machinery and equipment., • Studies production schedules and estimates worker hour requirements for completion of job assignment., • Assist with preparing requisitions to determine the number of spare parts to be kept in inventory., • Ensure that equipment and facilities are maintained in a safe, operable condition and/or arrange for replacement/upgrades., • Establishes procedures and contacts to ensure timely repairs of equipment., • Directs workers in electrical, electronic, mechanical, hydraulic, and pneumatic, and utility systems maintenance and repair of machinery and equipment., • Director of workers engaged in dismantling, assembling, and installing industrial machinery., • Analyzes production downtime reports, determines opportunities, and initiates action plans to increase efficiency, • Assist with the supervision of Maintenance staff including but not limited to performance management and employee development, etc., • Communicate with outside agencies i.e. contractors, equipment suppliers, technical consultants and vendors., • Continuous and close coordination with the Maintenance Manager, other Maintenance Supervisor(s), other Team Members, and Human Resources Requirements / Competencies: • Stays organized in businesses with robust PM schedules and continuous work requests, • Communicates clearly and often with contractors, maintenance staff, and executives, • Adheres to budget requirements in making purchasing decisions, • Thinks ahead about tasks that must be completed next to provide exceptional administrative support, • Strong analytical and problem-solving skills, and excellent interpersonal skills, including good oral and written communication skills, and previous experience using computers, • Proficient to excellent knowledge of MS Office and CMMS Systems, • Must be able to use, or learn to use, the equipment and tools used to perform the job, • Must be able to perform all job functions safely, • Must meet the company standards for the job, • Must be able to follow instructions, • Must be able to understand and follow all written SOP’s, • Must be able to understand SDS (Safety Data Sheets), • Must be able to work the scheduled / assigned times and required overtime for the position, • Must be able to stand and walk for extended periods of time, • Must be able to lift 50 lbs., • Flexible working hours are highly desirable, • Bilingual (English/Spanish) highly desirable Physical Requirements: The employee will occasionally move within the office to access office machinery, file cabinets, and collaborate with colleagues. Consistent use of office equipment, such equipment may include but not limited to computers, phones, printers, and copiers. The employee will be required to frequently communicate with both internal staff members as well as external parties or customers and must be able to convey accurate information. This job description reflects management’s assignment of essential functions; it does not exclude or restrict the tasks that may be assigned. This job description is subject to change based on company needs as expressed by management.

Superintendent – Commercial & Industrial Construction | Long Island/Tri-State General Contractor | Full-Time 📍 Hauppauge, NY (Long Island / NYC coverage) | On-Site | Competitive Salary + Full Benefits A well-established Long Island/Tri-State General Contractor — 50 years in business, family-run, and still growing — is looking for a Superintendent to take full field ownership of their next wave of projects. Their portfolio spans industrial, multifamily, self-storage, education, healthcare, and retail/hospitality work, with a strong reputation for precision delivery and long-standing repeat client relationships. This is a diversified, mid-size CM/GC firm with a steady, varied pipeline — you won't be running the same building type twice in a row. The core of the work is ground-up and renovation construction across multiple sectors — the kind of environment where a Superintendent who can adapt across project types, rather than specialize narrowly, genuinely stands out. THE PROJECTS YOU'LL RUN 🏭 Industrial and manufacturing facilities — warehouses, distribution, and specialized production spaces 🏢 Corporate and commercial office builds 🎓 Educational facilities, often on active or occupied campuses 📦 Self-storage developments 🏥 Healthcare and life sciences projects 🛍️ Retail and hospitality builds 🏘️ Multifamily and residential developments, including affordable and market-rate housing WHAT WE'RE LOOKING FOR ✔ Proven experience as a Senior Construction Superintendent on commercial, industrial, or institutional projects ✔ Background with a GC, construction manager, or developer-side construction team ✔ In-depth understanding of construction procedures, codes, and quality/safety standards ✔ Working knowledge of AutoDesk Build a plus; strong general Microsoft Office skills expected ✔ OSHA trained, with a genuine commitment to a proactive safety culture ✔ A field leader who runs a disciplined jobsite while staying approachable to trades, subs, and the project team WHAT THE ROLE LOOKS LIKE → Own field operations from mobilization through final turnover → Maintain daily jobsite logs and produce 3-week look-aheads → Run weekly foreman meetings and schedule subcontractors/vendors to hold the project timeline → Perform quality control, inspecting work against contract documents and specifications → Collaborate directly with engineers, architects, subcontractors, and vendors to keep the project moving → Work alongside the Sr. Project Manager on monthly requisition review → Own site access control and day-to-day site management → Communicate and reinforce a genuine safety-first culture, including an Incident and Injury Free (IIF) program WHY THIS ROLE STANDS OUT ⭐ 50 years in business, family-run, and still growing — real stability in an industry that doesn't always offer it ⭐ A genuinely diverse pipeline — industrial, multifamily, self-storage, education, healthcare, retail — so there's no downtime and no monotony ⭐ A company built on stated values — transparency, integrity, focus, tenacity, reliability — that consistently shows up in how projects are run ⭐ Full benefits package: health, dental, vision, life insurance, 401(k), and professional development support ⭐ Genuine on-site autonomy — this contractor trusts its Superintendents to run their jobs INTERESTED? Apply directly, or message me and I'll walk you through the pipeline, culture, and what makes this a strong next move — I work closely with this team and can give you the full picture. Happy to have an informal chat first if you're just weighing options.

Pay: $90,000.00 - $150,000.00 per year Job description: The Kulka Group is seeking a motivated and detail-oriented Estimator to join our growing commercial construction team. This role is a critical part of our organization and plays a major role in the successful planning and execution of our projects. We are looking for someone who is highly organized, analytical, proactive, and capable of managing multiple estimates and deadlines in a fast-paced environment. The ideal candidate has strong communication skills, attention to detail, and the ability to work collaboratively with subcontractors, vendors, project managers, architects, engineers, and ownership teams throughout the preconstruction process. Responsibilities • Prepare detailed conceptual, schematic, and hard bid estimates for commercial construction projects, • Perform quantity takeoffs and scope analysis, • Solicit and manage subcontractor and vendor pricing, • Review drawings, specifications, and project documents for completeness and constructability, • Assist with value engineering and cost-saving recommendations, • Analyze subcontractor proposals and level scopes, • Participate in preconstruction meetings and bid reviews, • Develop and maintain relationships with subcontractors and suppliers, • Assist with budgeting, procurement planning, and buyout coordination, • Maintain organized estimating files, bid documents, and historical cost data, • Collaborate closely with Operations and Project Management teams to ensure smooth project turnover Qualifications • Bachelor’s degree in Construction Management, Engineering, Architecture, or related field preferred, • Commercial construction estimating experience preferred, • Strong understanding of construction means and methods, • Excellent organizational and time management skills, • Strong communication and negotiation abilities, • Ability to read and interpret construction drawings and specifications, • Proficiency in Microsoft Office and estimating software platforms, • Ability to manage multiple deadlines and priorities simultaneously, • Detail-oriented with strong analytical and problem-solving skills What We Value At Kulka, we place a huge emphasis on professionalism, accountability, communication, and delivering a world-class client experience. We are looking for team members who take pride in their work, think proactively, and want to contribute to the continued growth and success of the company. About Kulka Kulka is a Long Island-based commercial construction and development company with over 52 years in business, specializing in industrial, multifamily, educational, hospitality, self-storage, office, and commercial construction projects. Core Values Focus Reliability Integrity Transparency Tenacity Build Your Dream Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance, • Work Location: In person

Job DescriptionBenefits: • 401(k), • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Training & development, • Vision insurance, • Wellness resources REPORTS TO: Maintenance Manager HOURLY RATE: $28.00- $45.00 TERMS OF EMPLOYMENT: Permanent | Full-Time, 12- hour Shift LOCATION: Copiague, NY About Us We provide full-service contract manufacturing, bottling, and packaging solutions for gummy natural health products, supporting clients from concept through launch. Operating within a regulated manufacturing environment, we are committed to quality, compliance, and continuous improvement. The Opportunity The Maintenance Technician is responsible for maintaining, troubleshooting, and repairing production equipment, utilities, and facility systems to support safe, reliable, and efficient operations in a GMP-regulated gummy manufacturing facility. This role performs preventive maintenance, responds to equipment issues, supports regulatory and food safety compliance, and partners with cross-functional teams to maximize equipment uptime and drive continuous improvement. What Success Looks Like • Consistently maintain equipment reliability and uptime through effective preventive maintenance and rapid troubleshooting., • Complete maintenance work safely and compliantly while adhering to GMP, food safety, and company safety requirements., • Respond quickly and effectively to equipment issues to minimize downtime and support production targets., • Identify and implement continuous improvement opportunities that enhance equipment performance, efficiency, and reliability. RESPONSIBILITIES: • Responsible for installation, maintenance and repair of machinery and mechanical equipment., • Maintain all types of equipment through a preventative maintenance program and log all details into a CMMS database. (Limble), • Read, interpret, and follow instructions and operation manuals., • Maintain a safe, clean, and organized work area., • Read blueprints and sketches proficiently to fabricate equipment and make modifications., • Repair or replace chains, belt conveyors, gear boxes/drive chains, hydraulics & pneumatics, welding/cutting, and use power tools., • Maintain HVAC systems, water softener systems, chiller units and other utilities., • Prioritize safety in approach to all work activities., • Focus on Continuous Improvement to streamline work processes. QUALIFICATIONS: Experience & Education • Highschool graduation or GED required, 2-year related diploma preferred., • At least 2 years’ experience in equipment repair, maintenance and troubleshooting in a manufacturing environment, food manufacturing preferred. Technical Skills, • Knowledge of mechanical equipment, electromechanical or controls experience preferred., • Experience with industrial electrical components is required, • Experience with electrical, HVAC and chiller systems would be considered an asset., • Must be able to read, write, and understand English., • Excellent problem-solving and communication skills Working Conditions and Physical Requirements • Willingness to work shift schedule including nights, weekends and overtime as required., • Must be able to wear all required personal protective gear., • Stoop, reach, kneel or crouch., • Exposure to moving mechanical parts., • Exposure to excessive noise and some hazardous materials., • Lift 25+ pounds overhead, • Turn, bend, reach, pull, and walk., • Stand for extended periods of time; up to 12 hours. This job description is not intended to be all-inclusive. Employees may be required to perform other job-related duties as needed to meet business, operational, quality, safety, or regulatory requirements. Our Commitment to Inclusive Hiring We are committed to building an inclusive and accessible workplace. We welcome applications from individuals of all backgrounds and experiences. Accommodations are available throughout the recruitment process upon request.

Job Description Benefits/Perks • Competitive Compensation, • Great Work Environment Job Summary We are seeking an Industrial Machine and Maintenance Mechanic to join our team! We are a local manufacturing company located in Bay Shore, as a Mechanic, you will work a variety of industrial machinery and equipment, following all safety guidelines and job specifications to ensure projects are completed both safely and on time. You will also perform and record regular maintenance on our equipment, report any defects or issues immediately, and keep equipment in good, clean working order. The ideal candidate should work well in a team environment and maintains the highest safety standards. Responsibilities • Safely operate a variety of large, heavy machinery safely, • Maintain all equipment used, including cleaning and regular maintenance, • Work closely with the rest of the team on each project to ensure successQualifications, • Strong communication skills, • Strong attention to detail, • The ability to work well within a team environment

Job DescriptionIndustrial Maintenance Technician — Optical Manufacturing If you’ve ever slipped on a pair of Ray-Ban, Oakley, Persol or Oliver Peoples frames—or trusted lenses like Varilux, Crizal, Eyezen, Stellest or Transitions—you’ve experienced our work. As a global leader in eyewear and eyecare, we design, build, and deliver premium vision products to customers in 150+ countries through brands and retail networks like Sunglass Hut, LensCrafters, Target Optical, and cutting-edge e‑commerce platforms. At the heart of our growth is a high-tech, integrated supply chain: centralized frame operations and a nationwide network of prescription labs for lens finishing. In this role, you’ll keep the equipment that powers this system running at peak performance. A day in the life You start by verifying daily equipment set-ups and calibrations. A preventive maintenance task in Megamations flags an upcoming service—so you gather parts, lock-out/tag-out, and complete the PM. Mid-morning, a production line needs quick troubleshooting; using schematics and your multimeter, you trace the issue, replace a component, and get the line back on schedule. After lunch, you disassemble and clean a mechanism, log your maintenance data, and coach a teammate on best practices. You end the day by scanning open work orders and planning tomorrow’s tasks. What you’ll do • Execute preventive maintenance per schedule; diagnose and repair equipment to support manufacturing throughput and uptime., • Handle facility and equipment needs across plumbing, HVAC, electrical, mechanical, and PLC-related tasks., • Disassemble, clean, repair, and reassemble systems—both mechanical and electrical., • Perform minor electronic repairs, alignments, and calibrations; ensure daily start-up set-up and calibration are completed., • Enter and analyze maintenance records and performance data., • Track PMs, parts/orders, and tool activities in Megamations., • Assist the maintenance team leader in training manufacturing and maintenance associates., • Support process improvements in partnership with our total quality facilitator., • Demonstrate reliable attendance and punctuality, including breaks and lunch., • Champion safety (including strict Lock-Out/Tag-Out) and give immediate feedback when risks are observed., • Follow company policies and take on special projects as assigned. Basic qualifications, • High school diploma or GED with at least 1 year of relevant maintenance experience., • Hands-on background in highly automated, lean/continuous-flow production environments., • Proven troubleshooting using electrical schematics, a multimeter, and equipment manuals., • Ability to resolve issues remotely while collaborating with vendors, contractors, and suppliers., • Comfort with PCs and basic math., • Knowledge of safety procedures and standards, including Lock-Out/Tag-Out., • Physical capability to lift 50–100 lbs., stand or walk continuously, and frequently lift from waist, shoulder, and overhead. Preferred qualifications, • Associate degree in a technical field (or equivalent experience)., • 3+ years of related maintenance experience. Total rewards This opening reflects an immediate need. Compensation is informed by location, experience, skills, qualifications, and applicable minimum wage laws. Eligible roles may also include a competitive bonus and/or commission plan, plus a comprehensive rewards package—healthcare, retirement savings, paid time off/vacation, and product discounts. Explore details here: Benefits/Incentive Information Join 200,000+ colleagues advancing the future of eyewear and eyecare, powered by innovation and technology. Follow us on LinkedIn to learn more. Legal EssilorLuxottica complies with all applicable laws related to the application and hiring process. If you would like to provide feedback regarding an active job posting, or if you are an individual with a disability who would like to request a reasonable accommodation, please call the EssilorLuxottica SpeakUp Hotline at 844-303-0229 (be sure to provide your name, job id number, and contact information so that we may follow up in a timely manner) or email HRCompliance@luxotticaretail.com. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, national origin, social origin, social condition, being perceived as a victim of domestic violence, sexual aggression or stalking, religion, age, disability, sexual orientation, gender identity or expression, citizenship, ancestry, veteran or military status, marital status, pregnancy (including unlawful discrimination on the basis of a legally protected pregnancy or maternity leave), genetic information or any other characteristics protected by law. Native Americans in the US receive preference in accordance with Tribal Law.

Job DescriptionDescription: Northeast Aero Compressor and PG Aerotech are seeking an experienced Facilities Technician II to help maintain the safe, compliant, and efficient operation of our 55,000 square foot FAA Part 145 certificated repair station and MRO facility in Hauppauge, NY. This is a mid-level, hands-on role for a technician who has moved beyond entry-level building maintenance and is ready to take on greater ownership of preventive maintenance programs, more complex mechanical and electrical troubleshooting, and vendor coordination — while continuing to perform daily hands-on repair and upkeep work. The Facilities Technician II reports to the Production Manager and works closely with them to keep all building systems, ground support equipment, and industrial machinery running reliably. Requirements: • Perform routine and corrective maintenance on HVAC, electrical, plumbing, lighting, and overhead door systems, escalating only the most complex issues to the Facilities Supervisor, • Execute scheduled Preventive Maintenance (PM) tasks and help maintain accurate maintenance logs, service records, and equipment histories in compliance with repair station requirements, • Diagnose and troubleshoot mechanical, electrical, and pneumatic/hydraulic issues on industrial equipment and aviation ground support equipment, • Assist in coordinating third-party vendors and contractors for specialized inspections, certifications, and repairs, • Perform general building maintenance including carpentry, painting, minor structural repairs, and groundskeeping/snow removal as needed, • Conduct routine facility and safety inspections, identify hazards or worn components, and proactively address or report them, • Support the cleanliness and organization of the facility, including production floor, offices, break rooms, restrooms, and grounds, • Help ensure fire and life-safety systems are functioning correctly and are tested/documented on schedule, • Operate company vehicles and material handling equipment (e.g., forklift) to move tools, parts, and supplies between areas or job sites, • Maintain compliance with FAA Part 145 repair station requirements, OSHA regulations, EPA standards, and applicable building codes, • Respond to maintenance requests from building occupants and prioritize/resolve issues promptly Experience and Skills • 2–5 years of experience in building/facilities maintenance, industrial maintenance, or a related mechanical/electrical trade; aviation, manufacturing, or regulated-facility experience preferred, • Working knowledge of HVAC, electrical, and plumbing systems, with demonstrated ability to independently troubleshoot and repair common issues, • Some exposure to industrial equipment such as compressed air systems, generators, or pneumatic/hydraulic equipment preferred, • Comfortable using hand and power tools safely and effectively, with strong mechanical aptitude and problem-solving skills, • Ability to work independently on assigned tasks while collaborating with the Facilities Supervisor on larger projects, • Strong communication and customer service skills when responding to occupant requests, • Ability to pass a pre-employment and random drug and alcohol screening as well as a background check Physical Requirements • Ability to lift at least 50 pounds, • Comfortable working at heights on ladders and lifts, and in confined spaces, outdoor environments, and varying temperatures, • Manual dexterity and ability to constantly manipulate small to medium components, • Ability to stand, walk, bend, and climb stairs for extended periods, • Frequent use of hand tools, power tools, and cleaning/lubricating/painting chemicals Education / Licenses / Certifications • High school diploma or GED required; trade school training or an associate degree in a mechanical, electrical, or facilities-related discipline preferred, • Valid state driver's license with a clean driving record required, • Forklift certification preferred, or ability to obtain within 30 days of hire, • OSHA 10-Hour (or higher) General Industry certification preferred, or willingness to obtain Compensation and Benefits • Full-time, hourly position: $28–$34 per hour, commensurate with experience, skills, and certifications, • This range reflects a mid-level role positioned between our entry-level Facilities Technician/Driver and our Facilities Supervisor, based on current Long Island / Hauppauge, NY market data for facilities and building maintenance technicians, • Medical, dental, vision, and life insurance options, • 401(k) with 100% match on the first 4%, • Paid holidays, vacation, and sick/personal leave accrued from date of hire, • Training/education budget, gym reimbursement, complimentary drinks, company events, and philanthropy opportunities

Job DescriptionDescription: Position Summary Are you a skilled mechanic or technician looking for an exciting opportunity in the pharmaceutical industry? Join our team and play a key role in keeping our state-of-the-art manufacturing and packaging equipment running at peak performance. You’ll work hands-on with advanced machinery, help maintain facility upgrades, and be part of a collaborative team that produces critical healthcare products. Job Type: Full-Time Location: Hauppauge, NY Works Hours: Monday – Friday, 8:00AM – 4:30PM; 4:30PM - 1:00AM Pay Range: $24.00 - $40.00 per hour, depending on experience and shift Start Date: ASAP What Makes This Role Exciting • Work on high-tech, industrial-level equipment in a regulated pharmaceutical environment., • Be part of a team that produces products impacting consumer health and well-being., • Opportunity to troubleshoot and solve complex mechanical and electrical challenges., • Hands-on experience with cutting-edge machinery and automation systems., • Career growth potential in a company that values skill development and cross-training. Why Join CPC? At CPC, you’ll be part of a team that has set the standard in pharmaceutical development and contract manufacturing since 1971, helping bring high-quality OTC, dietary supplement, and prescription products to market faster and safer than ever. We pride ourselves on quality as a core value, innovative problem-solving, and a collaborative culture where everyone plays a role in advancing formulation and manufacturing excellence. CPC offers an inclusive, respectful workplace with opportunities to grow your skills and career while working with cutting-edge technologies and serving leading global brands. With a commitment to employee success, competitive benefits, and a culture built on teamwork and integrity, CPC is a place where your contributions truly make an impact. Requirements: Responsibilities In this role, you will: • Perform repairs, overhauls, and preventive maintenance on manufacturing and packaging equipment with minimal supervision., • Troubleshoot and diagnose mechanical and electrical issues efficiently., • Respond to emergency or unscheduled repairs to keep production running smoothly., • Maintain and upgrade facility equipment as required., • Safely use a variety of hand and power tools., • Document maintenance work and maintain equipment for optimal performance., • Assist in compiling operating instructions or standard procedures for equipment., • Support the team and take on additional responsibilities as assigned. Education and Experience • High school diploma or GED required; trade school or college coursework preferred., • Minimum 2 years of hands-on experience with MIG/TIG welding, mills, turning machinery, or other industrial equipment., • Experience in pharmaceutical manufacturing or packaging is a plus. Skills, Knowledge, and Abilities: • Ability to read and interpret electrical schematics and mechanical diagrams., • Familiarity with PLCs (Programmable Logic Controllers) and VFDs (Variable Frequency Drives)., • Strong attention to detail and commitment to quality., • Ability to work independently or as part of a team., • Knowledge of company SOPs, GMPs, and safety guidelines., • Understanding of industrial production systems and machinery operations.

Job Description Regional Operations Manager | $100K-$110K | Multi-Branch Leadership $100,000-$110,000 Annual Compensation Lead a $30M multi-branch region across the New York Metro area. Develop exceptional leaders. Drive profitable growth. Build high-performing teams. Auto-Chlor System is seeking an experienced Regional Operations Manager to oversee multiple service branches across New York City, Queens, the Bronx, and Connecticut. In this role, you'll partner directly with executive leadership to drive regional growth, improve operational performance, and develop the next generation of Branch Managers and Supervisors while regularly traveling throughout the region to support your teams. This isn't a corporate desk job. We're looking for a hands-on leader who enjoys coaching managers, developing sales teams, solving operational challenges, and spending time in the field helping teams succeed. If you've led multiple business units, owned P&Ls, developed leaders, and consistently driven business growth, we'd like to speak with you. Why Join Auto-Chlor? • Lead a $30M+ multi-branch region, • Partner directly with executive leadership, • Competitive compensation of $100,000-$110,000, • Company vehicle, technology, and travel support, • Opportunity to make a measurable impact on regional growth and leadership development, • Join a stable, growing company that invests in developing leaders from within What You'll Do • Lead multiple branch locations across the New York Metro region, • Coach and develop Branch Managers and Supervisors, • Drive regional sales growth and market expansion, • Review P&Ls, financial performance, and operational KPIs, • Improve customer retention and branch profitability, • Recruit, develop, and retain leadership talent, • Partner with executive leadership on regional initiatives, • Travel throughout the region to coach, support, and develop branch teams Ideal Background • Experience leading multiple business units or branch locations, • P&L ownership and financial accountability, • Proven sales leadership experience, • Demonstrated success developing managers and future leaders, • Experience in service, distribution, logistics, staffing, facilities, uniforms, foodservice, industrial services, equipment rental, or a related industry, • Willingness to travel throughout the New York Metro region to support multiple branch locations Apply today and take the next step in leading one of Auto-Chlor's largest and most successful regions!

Job Description Hope For Youth has an exciting opportunity for a part-time cook! Hope For Youth is a nonprofit organization specializing in child welfare services. For over 50 years, Hope For Youth strives to provide positive outcomes for children, adolescents, and families. If you're interested in positively impacting the lives of our youth while doing something your passionate about, you have come to the right place. We are also honored to announce that the Hauppauge Industrial Association of Long Island (HIA-LI), an advocate for its member organizations since 1978, has recognized HFY as their Not-For Profit Business Award honoree for Excellence in 2025! To be a successful Cook, you must be ready, willing, and able to do the following always: • Responsible for daily lunch and dinner preparation and keeping breakfast station fully stocked. Food preparation includes preparing trays in advance for weekend use., • Prepare monthly menus of healthy balanced meals., • Prepare specialized meals as needed, ie. diabetic, low-fat, etc., • Food ordering and shops within allotted budget., • Maintaining kitchen and equipment cleanliness at all times, • Safe food storage and handling as per regulations., • Perform other resulting and necessary work to meet the needs and requirements of the clients, the program, Hope For Youth, oversight agency and any other regulatory obligations To qualify for this job you need to have at minimum: • High School Diploma or GED, • Valid Driver's License, • Ability to lift/move up to fifty (50) pounds, stand for long periods, • Physical Requirements: read/write reports and log entries, walking/standing/sitting for prolonged periods, bending/stooping, kneeling/squatting, climbing stairs, reaching overhead, repetitive wrist/finger movements, ongoing access to reliable vehicle and driving own vehicle for work This opportunity is being offered as, 20 hours per week, Monday - Friday, 9am - 2pm Please include resume, cover letter and salary requirements. Only candidates selected for an interview will be contacted. Hope For Youth is an Equal Opportunity Employer. All offers must be made contingent and once a contingent offer has been accepted, all processing must note the contingency throughout the process. Only candidates selected for an interview will be contacted. Excellent training and leadership opportunities available throughout employment and more. Here are some of the other benefits of working for Hope For Youth. • Meaningful work that makes a difference in the lives of children and families of Long Island!, • Supportive like-minded, mission-driven co-workers, • Diverse Culture that promotes recognition and belonging, • Advancement and supplemental pay opportunities, • Free Training programs, Free Tuition Credits, Scholarships and Tuition Assistance, • Employees may be eligible for Student Loan Forgiveness Programs, • Special Events and Recognition Awards, • Volunteer and Internship opportunities available within, • Benefit eligibility commences on the first of the month following the first 30 days of employment - Medical, Dental, Vision - HRA with HSA and Co-pay options available., • 91% Employer-paid medical premiums, • Generous paid time off, • Agency-funded Pension Plan, • Pre-tax savings plans: self-directed 403(b), 529, Aflac, • Agency-paid life insurance and disability, and for some positions, long-term disability Learn more about Hope For Youth at: http://www.hfyny.org Additional Pay Range Information The salary range and/or hourly rate range listed for this position is a good faith determination of potential compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future. When determining an employee's base salary and/or rate, several factors may be considered as applicable (e.g., years of relevant experience, education, licensing, certifications, other credentials, negotiated contracts, budget and internal equity, etc.). Learn more about Hope For Youth at: http://www.hfyny.org Job Posted by ApplicantPro

Job DescriptionDescription: The Custodian has the primary responsibility for maintaining the cleanliness of all CPC interior and exterior property including office areas, warehouses, manufacturing/packaging production, restrooms, cafeterias, parking lots, etc. Requirements: Responsibilities: Responsibilities include, but are not limited to: • Clean windows, walls, light fixtures, ceilings and change light bulbs using ladder., • Mops, sweeps, vacuums, scrub, strips and waxes floors using industrial vacuum cleaner and/or buffing machine., • Use chemicals and cleaning solutions to properly clean facilities., • Move cabinets, boxes, furniture, crates and equipment to clean areas., • Empty and take out trash to compactor or dumpsters., • Paint facilities and replace floor tiles as needed., • Outside duties such as sweeping walks, clearing leaves, removing snow or performing other seasonal tasks., • Organizing the stockroom and storage areas., • Complete and sign daily Porter Checklist., • Restock and notify management when supplies are needed., • Other responsibilities as assigned by Senior Management. Education and Experience: • High School or GED diploma a plus., • One-year experience is preferred but not required. Skills and Abilities: • Pays attention to detail., • Ability to follow instructions and work independently., • Ability to communicate effectively., • Able to lift and move 50 lbs. or more, • Physical effort may be required which includes prolonged standing, lifting, pushing, moving, or carrying heavy materials., • The operation of certain machinery requires eye, hand, and foot coordination. Supervisory Responsibilities: • · None Personnel Protective Equipment or Attire Required for Position: • · As needed Physical Demands and Work Environment • Frequently works in inside work conditions which may vary from a warehouse environment to production floor to office setting with various noise levels., • Sometimes works in outside weather conditions including heat, cold, rain, snow, etc., • Constantly required to use hands, arms and fingers to feel and reach., • Occasionally required to climb, balance, stoop, kneel, crouch and walk., • Must be able to lift and/or move 50 pounds or more., • Vision abilities required include close vision, distance vision, and peripheral vision. Pay Range: $17.00 - $17.25 per hour

Job DescriptionDescription: Company Overview The Academy Charter Schools offers an exceptional interdisciplinary curriculum in a technology-rich environment that challenges students to explore connections across subjects and use experiential learning to bridge the gap between theory and practice. The Academy’s focus on character development and community service cultivate a student body poised to be active, engaged and responsible members of the community. The Academy employs a committed staff whose teaching and high academic and behavioral expectations will promote the excellence known so the community’s children can achieve. Job Summary The Academy Charter School custodian will clean and maintain school facility to ensure a safe, secure and comfortable environment conducive to student learning. The custodian will uphold the mission and values established by the school. Responsibilities • Clean classrooms, rest rooms, hallways, multipurpose room, offices and all interior rooms during the day, • Floor care including mopping, stripping and waxing, • Daily trash removal and cleaning of all receptacles, • Set up and cleans dining area before, between, and during breakfast and/or lunch periods, • Respond to emergency cleanups during the day, • Perform routine grounds-keeping duties, including picking up litter, maintenance of sidewalk areas, and salting of sidewalk, • Sets up and arranges furniture for assemblies, meetings and special events, • Secure, protect and ensure the proper usage and maintenance of all custodial equipment, • Assist with shipping and receiving of packages, parcels and large items, • Light moving and carpentry, • Open and close facilities and provide access to classrooms or offices during the normal school week, after hours, and occasionally weekends as directed, • Perform walk through of the facility during the day in order to ensure the building and the outer perimeters are clean and safe; ensure all bathrooms are properly stocked at all times, • Perform other related duties as required and assigned, • Demonstrate knowledge of, and support of the schools mission, vision, value statements, standards, policies and procedures, operating instructions, confidentiality standards, and the code of ethical behaviour Pay Transparency: The hourly range for this role is $16.50/hr. - $21.00/hr. Base pay offered may vary within the posted range based on several factors, including but not limited to education, job-related knowledge, skills, experience, and location. The Academy is committed to pursuing and hiring a diverse workforce and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of any characteristic protected by applicable federal, state or local law. Requirements: Requirements • Proven experience as custodian, janitor or in a similar role, • Knowledge of use and maintenance of industrial cleaning equipment and appliances, • Knowledge of safe disposal of chemical liquids and other hazardous components, • Attention to detail

Job DescriptionBenefits: • 401(k), • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Vision insurance, • Wellness resources REPORTS TO: Production Supervisor HOURLY RATE: $18.50-24.00 TERMS OF EMPLOYMENT: Permanent | Full-Time , 12 – Hour Shift LOCATION: Copiague, NY About Us We provide full-service contract manufacturing, bottling, and packaging solutions for gummy natural health products, supporting clients from concept through launch. Operating within a regulated manufacturing environment, we are committed to quality, compliance, and continuous improvement. The Opportunity We are seeking a reliable and detail-oriented Shift Cleaner to join our sanitation team in a fast-paced manufacturing environment. The Shift Cleaner is responsible for maintaining cleanliness and hygiene in accordance with GMP (Good Manufacturing Practices) standards. Duties include cleaning production areas, operating industrial dishwashing equipment, restocking hygiene stations, and safely handling cleaning chemicals and equipment. This position is best suited to someone who is familiar with a production/manufacturing environment, enjoys cleaning, and who can work independently. What Success Look Like • Clean production areas consistently to GMP standards., • Accurate and timely completion of sanitation records., • Proper handling of cleaning chemicals and equipment., • Safety hazards and maintenance issues are reported promptly. Responsibilities: Sanitation & Cleaning • Perform general and detailed cleaning of production areas, including floors, walls, and surfaces, to GMP standards., • Operate an industrial sized dishwasher for cleaning production tools., • Work with chemicals and solvents, as well as a variety of specialized tools (floor scrubbers, scrapers, pressure washers, brushes, etc.) to complete specific cleaning tasks., • Able to properly handle detergents, sanitizers, and/or acids in containers to prepare cleaning solutions, according to specifications., • Follow proper procedures for cleaning in food-safe and GMP-regulated zones, including correct use of PPE and sanitation chemicals., • Replenish handwashing stations, including hand soap, sanitation, paper towels, and production PPE (hair nets, beard nets, shoe covers, and ear plugs)., • Replenish the sanitizer and maintain cleanliness of foot bathmats., • Disposal of waste in accordance with site procedures., • Work independently or as part of a team to ensure cleanliness standards are consistently met or exceeded. Documentation, • Complete sanitation records and checklists accurately and on time., • Report maintenance issues, safety hazards, and/or supply shortages to Supervisors promptly. Qualifications: Experience & Education • High school diploma or equivalent preferred., • Previous cleaning or sanitation experience in manufacturing, food production, or GMP environment is a strong asset. Competencies, • Good attention to detail and commitment to maintaining a clean, safe workplace., • Reliable, punctual, and able to work shift work., • Ability to read and follow written instructions and complete sanitation logs in English, and effective oral communication skills in English are required. Working Conditions & Physical Requirements • Stand or walk for an extended period on a hard surface., • Bend, push, pull, twist, and climb stairs., • Lift up to 50 lbs., • Be present in manufacturing environment which can be noisy, hot, cold and require PPE. This job description is not intended to be all-inclusive. Employees may be required to perform other job-related duties as needed to meet business, operational, quality, safety, or regulatory requirements. Our Commitment to Inclusive Hiring We are committed to building an inclusive and accessible workplace. We welcome applications from individuals of all backgrounds and experiences. Accommodations are available throughout the recruitment process upon request.