JOB TODAY logo

Lifting jobs in Deer Park, New YorkCreate job alerts

  • Combustion Field Service Engineer
    Combustion Field Service Engineer
    1 day ago
    $80000–$120000 yearly
    Full-time
    Bethpage

    Position Summary- REMOTE The Combustion Field Service Engineer is responsible for supporting the installation, startup, commissioning, troubleshooting, tuning, inspection, and service of industrial combustion systems used on ovens, furnaces, washers, dry-off ovens, thermal systems, and related finishing equipment. This position works directly with customers, field crews, controls engineers, mechanical engineers, project managers, and vendors to ensure combustion equipment operates safely, reliably, and according to project requirements. The role requires strong technical ability, hands-on troubleshooting skills, field communication skills, and a willingness to travel to customer sites. The ideal candidate has experience with industrial burners, gas trains, safety shutoff systems, fuel-air ratio control, temperature control, combustion blowers, exhaust systems, and industrial oven or furnace operation. Key Responsibilities Field Service & Commissioning · Travel to customer sites to support installation, startup, commissioning, service, and troubleshooting of industrial combustion systems. · Inspect burner assemblies, gas trains, air piping, fuel piping, combustion blowers, exhaust systems, pressure switches, flame safeguards, valves, regulators, and related components. · Assist with burner light-off, pilot setup, main flame setup, low-fire and high-fire adjustment, and combustion tuning. · Verify proper operation of combustion safety devices, interlocks, purge sequences, flame detection systems, and burner management controls. · Support startup and commissioning of ovens, furnaces, dry-off ovens, washers, and other thermal process equipment. · Perform system inspections and identify mechanical, electrical, controls, or combustion-related issues. · Diagnose and resolve field issues involving burner performance, flame stability, temperature control, pressure problems, nuisance trips, uneven heating, or poor system operation. · Work with controls engineers to verify burner control logic, alarms, interlocks, permissives, and operating sequences. · Document startup settings, field changes, test results, and service findings. Combustion System Troubleshooting · Troubleshoot natural gas, propane, combustion air, pilot, ignition, flame detection, and burner management issues. · Evaluate gas train components including regulators, safety shutoff valves, proof-of-closure switches, vent valves, pressure switches, gauges, and manual valves. · Check combustion air supply, burner air settings, blower operation, draft conditions, and exhaust performance. · Identify issues related to fuel pressure, air pressure, flame signal, ignition reliability, burner turndown, and temperature stability. · Make recommendations for repair, replacement, adjustment, or redesign when systems are not operating correctly. · Support emergency service calls and customer troubleshooting when equipment is down or performing poorly. Technical Support & Communication · Communicate clearly with customers, plant maintenance teams, contractors, vendors, and internal project teams. · Provide field feedback to engineering, controls, purchasing, and project management. · Assist with reviewing drawings, burner manuals, gas train layouts, equipment manuals, and control sequences. · Support the creation of service reports, inspection reports, punch lists, startup documentation, and customer recommendations. · Communicate parts needs to purchasing and help identify replacement components. · Assist with training customers on proper equipment operation, safety checks, startup procedures, shutdown procedures, and routine maintenance. Safety & Compliance · Follow company safety policies and customer site safety requirements. · Support combustion system work in accordance with applicable codes, standards, customer specifications, and industry best practices. · Verify that safety devices and interlocks are operating as intended before equipment is released for production. · Identify unsafe conditions and communicate concerns immediately to the appropriate internal and customer contacts. · Maintain accurate documentation of combustion settings, safety checks, field adjustments, and service recommendations. Required Skills & Qualifications · Experience with industrial combustion systems, burners, ovens, furnaces, dryers, thermal oxidizers, or related industrial heating equipment. · Ability to troubleshoot mechanical, electrical, controls, and combustion-related issues in the field. · Understanding of burner operation, fuel-air ratio, pilot systems, flame detection, combustion air, exhaust, draft, and temperature control. · Familiarity with gas train components such as regulators, safety shutoff valves, pressure switches, proof-of-closure switches, vent valves, and flame safeguards. · Ability to read and understand mechanical drawings, electrical schematics, piping diagrams, control panel drawings, and equipment manuals. · Strong communication skills with customers, contractors, vendors, and internal teams. · Ability to work independently at customer sites while representing the company professionally. · Strong documentation skills for service reports, startup notes, inspection findings, and punch lists. · Willingness and ability to travel regularly for customer site work. · Valid driver’s license. · Ability to use basic hand tools, meters, manometers, combustion analyzers, and other field service equipment. Preferred Qualifications · Experience with industrial ovens, porcelain enamel furnaces, paint finishing systems, washers, dry-off ovens, cure ovens, or heat-treating equipment. · Experience with burner brands such as Maxon, Eclipse, North American, or similar industrial burner systems. · Experience with flame safeguard systems, burner management systems, PLC-controlled combustion systems, and safety circuits. · Familiarity with NFPA 86 or other industrial oven and furnace safety standards. · Experience performing combustion analysis and burner tuning. · Electrical troubleshooting experience including control panels, relays, sensors, limit switches, VFDs, and PLC inputs/outputs. · Experience leading or supporting equipment startups. · Welding, fabrication, pipefitting, millwright, or mechanical installation experience is a plus. · Associate degree, technical certificate, military technical training, or equivalent field experience in combustion, electrical, mechanical, industrial maintenance, or engineering technology is preferred. Physical Requirements · Ability to travel to industrial customer sites. · Ability to stand, walk, climb ladders, bend, kneel, crawl, and work around industrial equipment. · Ability to lift and carry tools, parts, and equipment up to 50 lbs. · Ability to work in hot, dirty, noisy, or active industrial environments. · Ability to work at heights, around moving equipment, and in confined or restricted areas when required. · Ability to wear required PPE, including safety glasses, hearing protection, gloves, hard hat, steel-toe boots, and other customer-required safety equipment. Travel Requirements

    Immediate start!
    Easy apply
  • Glass Fabricator
    Glass Fabricator
    9 days ago
    Full-time
    Hauppauge

    At Lafayette Metal & Glass, we take pride in doing the job right—and we’re looking for dependable people who feel the same way. We are seeking a Glass Fabricator to cut, shape, finish, and assemble architectural glass and glazing components in our fabrication shop. This role supports commercial interior and exterior projects — storefronts, partitions, railings, and custom glazing assemblies. In this role, quality means showing up, paying attention to the details, working safely, and taking pride in the work you put your name on. If you’re someone who cares about doing good work and working well with a team, we want you to be part of ours. We value hard work, reliability, and a commitment to quality every day. RESPONSIBILITIES Perform Fabrication of all Materials as assigned in alliance with Lafayette’s Quality Standards • Read and interpret shop drawings, cut lists, and job tickets to determine dimensions, tolerances, glass type, and edge treatment, • Ensure Quality Control of all Materials Fabricated, including but not limited to doors, mirrors, plate and architectural glass, • Inspect finished product for scratches, chips, distortion, and dimensional accuracy before release; document and report defects, • Handle, move, and stage glass safely for delivery to the Field Work in collaboration with all Shop staff and communicate any concerns relative to fabrication to Production Foreman Maintain and perform basic upkeep on all assigned equipment to ensure its integrity Always maintain a safe working environment while performing assigned duties Assist with other tasks as assigned, including deliveries and pickups of materials REQUIREMENTS • 3+ Years Prior experience of hands-on glass fabrication, glazing, or comparable shop fabrication experience, • Experience with CNC glass cutting, glass polishing and WaterJet equipment, • OSHA 10 or 30 certification, • Valid Drivers License, • Ability to work in a team environment, • Bilingual English/Spanish with excellent communication skills, • Forklift experience and certification strongly recommended, • Ability to lift up to 50 lbs independently, • Working knowledge of safe glass handling practices and material weight limits., • Reliable attendance and the ability to work overtime when project schedules require it.

    Easy apply
  • Lead Security Systems Technician
    Lead Security Systems Technician
    9 days ago
    $36–$42 hourly
    Full-time
    Plainview

    Full-time schedule: Monday–Friday, 7:00 a.m.–3:30 p.m. Compensation: Hourly wage is $36.00–$42.00, depending on technical skills and qualifications. Plus a comprehensive benefits package. This field-based position involves installing, configuring, maintaining, and troubleshooting security and communication systems at client sites. Responsibilities include working with alarm panels, access control devices, surveillance equipment, electronic locking hardware, power supplies, and low-voltage cabling. You will read floor plans and technical drawings; run, dress, terminate, and test cabling; configure IP security devices; assign static IP addresses and subnets; and integrate security hardware with local area networks. You will install, program, and service systems such as Genetec, AMAG, BOSCH, AXIS, and similar platforms. The role also includes diagnosing and repairing complex faults involving ground faults, open loops, communication dropouts, power supplies, burglar alarms, access control, cameras, and related infrastructure. Work performed must be tested, documented, and completed according to company standards. The position requires regular regional travel to client job sites throughout the metro New York and surrounding areas. Most working hours will be spent on-site. You will also lead and support field technicians, coordinate with project managers and internal team members, and work independently while maintaining a professional attitude, strong work ethic, and attention to detail. **Required qualifications: At least five years of hands-on experience in the security or low-voltage field - Direct experience installing and servicing IP camera systems, access control, and burglar alarms - Strong troubleshooting, diagnostic, mechanical, and electronic skills\n- Experience with headend wiring, punch-downs, panels, cameras, and IP-based infrastructure - Ability to read and interpret blueprints and technical drawings - Proficient verbal and written communication and problem-solving skills - Ability to work independently without supervision - Valid driver’s license and clean driving record - Ability to lift up to 50 pounds and work on ladders up to 20 feet high - Successful completion of a background check and drug test Benefits include:** • Employer-sponsored retirement plan with a dollar-for-dollar company match up to 3%\n- Immediate 100% vesting and maximum investment freedom\n- Health, dental, vision, life, and AD&D insurance, • Paid vacation after six months\n- Paid birthday, holidays, sick time, and personal time\n- Referral program, • Employee discounts on travel, equipment, and more, • Company vehicle and fuel card after the probationary period After probation, the company vehicle program includes dispatching from home to the first service call, company-funded fuel, and coverage of vehicle-related commuting expenses. The employer is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, creed, sex, sexual orientation, gender identity or expression, national origin, age, ethnicity, disability, veteran or military status, marital or familial status, genetic information, citizenship status, status as a victim of domestic violence, arrest or conviction record, caregiver status, credit history, unemployment status, height, weight, sexual and reproductive health decisions, partnership status, or any other characteristic protected by applicable law.

    Immediate start!
    Easy apply
  • Warehouse Associate
    Warehouse Associate
    1 month ago
    $20–$25 hourly
    Full-time
    Deer Park

    As a Warehouse Associate at Manhattan Laminates | Roberts Plywood, you’ll help keep orders moving by picking and packing plywood, operating a sit-down forklift, and assisting customers with pickups. You’ll also process incoming and outgoing inventory accurately and support the warehouse team and other departments. What You'll Do • Pick and package plywood orders for shipment using a sit-down forklift., • Process inbound and outbound transactions and follow inventory control procedures to keep records accurate., • Assist customers with pickups by locating orders with a handheld RF scan gun, pulling the correct products, and helping load their vehicles., • Load and unload trucks., • Keep the warehouse clean and organized by moving skids, clearing entrances and exits, and disposing of empty packaging., • Report hazards to management and help maintain a safe work environment. Schedule • Monday through Friday, • 11:00 AM - 8:00 PM, or until close depending on workflow, • On-site in Deer Park, NY What You'll Need • At least 1 year of sit-down forklift experience (required), • Ability to lift and move at least 50 lbs. (required), • Reliability, punctuality, and attention to detail, • Ability to multitask, prioritize work, solve problems, and process a high volume of transactions accurately, • A customer-focused, positive attitude and willingness to learn and improve, • Ability to reliably commute to Deer Park, NY 11729 Preferred Experience • At least 1 year of warehouse experience, • At least 1 year of RF scan gun experience, • Experience in the lumber or distribution industry Benefits • 401(k) and 401(k) matching, • Health, dental, vision, and life insurance, • Flexible spending account, • Paid time off Search Trade Supply Group to learn more about our current career opportunities.

    Easy apply
  • Customer Service & Front Counter Specialist
    Customer Service & Front Counter Specialist
    2 months ago
    $19–$22 hourly
    Full-time
    Deer Park

    The Auto Paint Depot – Deer Park, NY Pay: $19.00–$22.00 per hour Schedule: Full-Time | Monday–Saturday availability | 8:00 AM–5:00 PM | Occasional Sundays may be required About The Auto Paint Depot The Auto Paint Depot is a growing automotive paint and supplies company located in Deer Park, NY. We specialize in custom-mixed automotive paint, touch-up paint, professional automotive refinishing products, and online order fulfillment for customers throughout the United States. We are looking for a dependable, organized, customer-focused person to join our team and become an important part of our front counter and customer service operation. This is not simply a receptionist position. You will work directly with customers in our store, by phone, and online. You will help customers place orders, answer questions, research existing orders, and help resolve problems when they occur. We are willing to train the right person, but reliability, professionalism, communication skills, and the ability to learn are extremely important. What You'll Do Your responsibilities will include: • Greet and assist customers at our front counter, • Answer incoming customer phone calls, • Respond professionally to customer emails and online inquiries, • Help customers place orders and select appropriate products, • Ring up in-store purchases and process customer transactions, • Create and review customer orders and invoices, • Look up order status and tracking information, • Help resolve shipping, damaged-order, return, refund, and order-related issues, • Assist customers with automotive paint and color-match questions, • Communicate with customers when additional information is needed to complete or correct an order, • Work with orders from our website and online marketplaces, • Use systems including email, WooCommerce, Amazon, eBay, ShipStation, POS software, and other business applications, • Keep accurate notes and records of customer issues and resolutions, • Follow up with customers when a problem requires additional attention, • Stock merchandise and help keep the front counter, showroom, and customer areas organized, • Assist other team members when needed, • Perform light lifting and remain on your feet during portions of the workday Who We're Looking For We are looking for someone who is: • Reliable and punctual, • Friendly, patient, and professional with customers, • Comfortable speaking with customers face-to-face and over the phone, • Able to communicate clearly through email, • Comfortable using computers and learning new software, • Organized and able to handle multiple tasks at the same time, • Able to follow instructions and established procedures, • Able to take ownership of a customer problem and follow it through to resolution, • Comfortable working in a busy small-business environment where priorities can change throughout the day, • Willing to learn about automotive paint, products, paint codes, and our ordering systems, • Able to work independently without needing constant supervision, • A team player who is willing to help wherever needed Qualifications Customer service and/or retail experience is preferred. Automotive, auto body, automotive paint, parts-counter, collision-industry, or similar experience is a strong plus, but we are willing to train a dependable candidate who is eager to learn. Experience with e-commerce, Amazon, eBay, WooCommerce, ShipStation, POS systems, or online customer service is also a plus. Spanish/English bilingual ability is a plus. Basic computer and email skills are required. Schedule & Availability This position requires availability Monday through Friday between 8:00 AM and 5:00 PM. Some Weekends may occasionally be required depending on business needs. Saturday availability 9:00 am to 3:00 pm. Please apply only if you can reliably meet the scheduling requirements of this position. Compensation & Benefits • $19.00–$22.00 per hour, • Full-time position, • 1 week paid time off (PTO), • 1 week sick time, • Major holidays off and paid, • On-the-job training, • Opportunity to learn the automotive paint and refinishing industry, • Opportunity to grow with an established local and e-commerce business A Successful Person in This Position The right person doesn't need to know everything about automotive paint on day one. What matters most is that you show up consistently, arrive on time, communicate professionally, pay attention to details, learn from training, and genuinely try to help customers. When a customer has a problem, we don't want someone who simply says, "I don't know." We want someone who will find out what happened, communicate with the customer, ask for help when necessary, and work toward a solution. If you're dependable, comfortable working with people and computers, enjoy solving problems, and want a position where you can learn and take on responsibility, we'd like to hear from you. When Applying Please include a short response to the following question with your application: A customer contacts us and says the automotive paint they received doesn't match their vehicle. They are frustrated and want the problem fixed. How would you handle the situation? We're not looking for automotive paint expertise in your answer. We want to understand how you communicate, think through a problem, and take care of a customer.

    Immediate start!
    Easy apply
1