Trabajos low voltage en New York, New YorkCrear alertas

Job Description Job Description Job Title: Controls Technician/ Electrician Company Information Our company was established in 1984 as an HVAC service company. We have grown into one of the largest mechanical contractors in NJ servicing large commercial and industrial buildings consisting of chiller plants, built-up penthouses and large HVAC equipment. We believe all customer interactions should be executed with the highest level of professionalism, excellence and competency at all levels of the organization. Minimum Requirements Experienced controls technician with a minimum of 5 years experience with a strong background in installation, commissioning, troubleshooting, repairing and maintaining building automation control systems and devices. Applicant must be able to follow wiring diagrams and engineering specifications to install and troubleshoot. Responsibilities: • Low voltage wiring, installation, termination of building automation controllers and end-devices., • Testing, commissioning and calibration of sensors, valves, dampers, etc., • Troubleshooting and programming of VFD’s., • Programming of application specific controls such as VAV boxes and fan coils., • Installation of MSTP and IP networks., • Be part of the on-call rotation, • Provide onsite installation and repair of controls systems Experience preferred in the following: • Tridium Jace, • Johnson FX, • BACnet IP, MSTP networks, • RTU, Chiller Plants, Boilers VAV boxes sequence of operations, • Microsoft Visio Required skills and strengths: • Valid drivers license, • HVAC building automation knowledge, • Must be able to perform the physical requirement of the job, • Basic computer skills of Excel, Word, and Outlook., • Five years experience with the installation and troubleshooting of building automations systems, • Communication skills (oral and writing), • Able to read wiring diagrams and engineers drawings, • Able to work in a fast-paced environment, • Able to multi-task and focus amid distractions, • Good listener and a team player, • Detail oriented, • Organized, flexible and follow directions, • Able to work overtime when needed, • Work independently Job Type: Full-time

Job DescriptionDescriptionYou Are: • An awesome human yourself! With great judgement and the ability to read the character of others. Appreciates the trust and flexibility to work from anywhere. Can communicate exceptionally well - both written and verbal. Loves to help others. Wants to create and contribute.You Have:, • Experience within Low-Voltage (Ops, Sr. PM, Lead Tech, Sr. Eng, Service Mgr, etc.), • Leadership & Management of Teams - Ideally including Hiring & Firing, • Proven yourself in a remote work capacity, • A Steady Work History (3yrs Between Hops) - We value loyalty and consistency, • A Pleasant Disposition and Hiqh EQ (Not just IQ!)Your Location:, • Work From Anywhere (US Based - No Sponsorship), • Must have internet with a clean and quiet space from which to work Your Schedule:, • Full Time (40hrs/Wk), • Clients are PST/CST/EST (So you are too!)Your Manager:, • Chris, Principal (Bio Here), • What’s it like to work with Chris? (Read Here)TheCoTeam's Core Values (OWLIE):, • Ownership, • Wise, • Leadership, • Intentional, • Execution Your Contribution to TheCoTeam: • Helping our clients find amazing talent for their workforce (Hiring Service Explained), • Helping applicants find great opportunities for their future, • Create compelling job descriptions, • Review applications, • Interview applicants, • Post your notes/scorecard for client review, • Workflow (Here) TheCoTeam's Contribution to You: • $100k to $110k/yr, • Medical/Dental/Vision (Blue Cross: HDHP + HSA for Deductible) – Check!, • 401k w/ 4% Match – You Bet!, • Three Weeks of PTO – Of Course!, • MacBook Air Laptop - We did say work from anywhere!, • $2500 Home Office: Herman Miller Aeron Chair, 42" Monitor, Magic Keyboard/TrackPad, Webcam

Job Description Step into a hands-on teaching role where your electrical expertise shapes the next generation of technicians. At Lincoln Tech, you’ll guide learners through real-world labs and practical scenarios across low voltage, telecommunications, networking, and audio/video systems. Whether or not you’ve taught before, we’ll support you in translating your field experience into impactful instruction. What you’ll do • Deliver engaging, lab-based training in Low Voltage, Telco, Networking, and Audio/Video systems using a fully outfitted facility., • Teach and assess the accredited Lincoln Tech curriculum with clarity and consistency., • Coach students to build professionalism, accountability, and confidence., • Track progress and provide constructive, timely feedback., • Instill rigorous standards for safety practices and regulatory compliance.What you bring, • 3+ years of experience as a Master Electrician., • Knowledge of high voltage systems., • Lineman experience., • Residential or commercial system integration background., • Residential electrical systems expertise., • Commercial electrical proficiency., • Familiarity with basic networking and wireless technologies., • Fiber optic splicing and termination experience., • High school diploma/GED., • Strong communication abilities., • Comfort with technology and instructional tools., • Teaching experience is a plus.Schedule Friday-Sunday 8:00 am-4:00 pm Benefits and growth • Teach in a modern, industry-standard training environment., • Join a stable, established institution., • Be part of Skilled Trade programs with proven graduate outcomes., • Professional development and advancement opportunities., • Climate-controlled work environment., • Bargaining Benefits:, • Health, Welfare and Retirement Plans, • Paid Holidays and Paid Time Off, • Healthy work/life balance., • Clear career growth pathways., • Ongoing training support and resources.About Lincoln Tech For eight decades, Lincoln Tech has trained students for in-demand careers in Healthcare, Automotive/Diesel, Skilled Trades, and Information Technology through immersive, skills-focused education. Lincoln Tech is an Equal Opportunity Employer. • Email: careers@lincolntech.edu, • Website: www.lincolntech.edu/careers

Job Description #jobalert | DIRECT HIRE | SENIOR ELECTRICAL PROJECT MANAGER | ELECTRICAL CONTRACTOR | Northern NJ (NYC Metro) A privately owned union electrical contractor in the NYC metro area is hiring a Senior Electrical Project Manager to run mission critical data center and hospital projects. Most of its work is in data centers and hospitals, both new builds and live, occupied facilities where power cannot drop, so the PM plans the work to keep it that way. You will lead projects from concept through commissioning, serve as the client's main contact, and work with engineers to solve design problems before they reach the field. This is an on-site role from the home office or the job site, with no remote work. The company is relationship-driven and keeps its people long term, which gives a strong PM room to grow a team as large projects come in. • Anticipated $130K-$150K, based on experience, • Benefits include: Employer-paid Health (employee and family), Dental, Vision, 401K w/ match, PTO, holidays, • Year-end profit-sharing bonus, discretionary, • On-site at the company office or the job site, no remote work Overview: • Lead electrical projects for mission critical data centers and hospitals from concept through construction and commissioning., • Be the primary client contact and trusted advisor for the life of the project., • Build scopes, schedules, budgets, staffing plans, and resource allocations, and hold the job to them., • Oversee medium and low voltage distribution, emergency power, UPS, backup generation, critical branch and essential electrical systems, grounding, and lighting controls., • Write, review, and run Methods of Procedure (MOPs), SOPs, and outage plans so work in live facilities is approved and executed safely., • Lead risk assessments, design reviews, and quality reviews with clients, engineers, commissioning teams, and facility operators., • Keep the job compliant with NEC, NFPA, Joint Commission, FGI Guidelines, and local codes., • Own the financials: forecasting, change orders, invoicing, and profitability., • Support proposals, client presentations, and business development., • Mentor assistant project managers and junior staff. Preferred skills and experience: • PMP certification, • LEED Accredited Professional (LEED AP), • Strongly Preferred - 10 or more years of electrical project management experience, • Strongly Preferred - 5 or more years managing large mission critical data center and healthcare projects, • Strongly Preferred - Track record on large projects, $10 million and up, • Strongly Preferred - Written and run MOPs for maintenance, equipment replacement, commissioning, and planned outages, • Working knowledge of redundancy designs (N+1, 2N, 2N+1) and critical power systems, • Healthcare electrical experience: essential electrical systems and emergency power requirements, • Strong project financial management and contract administration, • Experience with hyperscale data center clients, • Acute care hospital, surgical center, or medical campus experience, • Experience leading multidisciplinary teams across more than one location, • Revit, BIM coordination, and project management software Keywords: senior electrical project manager, electrical project manager, project manager, electrical construction, mission critical, data center, hyperscale, healthcare construction, hospital, MOP, method of procedure, UPS, generator, switchgear, emergency power, essential electrical system, critical power, commissioning, redundancy, 2N, N+1, NEC, NFPA, Joint Commission, FGI, change orders, contract administration, forecasting, PMP, LEED AP, Revit, BIM, IBEW, outage planning, Northern NJ, New Jersey, NYC metro EEO

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! Wachter is accepting applications for Low Voltage Lead Project Technicians for large scale project work at various locations across the United States. This position requires technicians to travel up to 95% of the time. We seek self-motivated and reliable technicians for service and special installation projects, who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Benefits Package: Company Paid! • Medical, Dental, Prescription & Vision Benefits, • Life, AD&D, and LTD insurance, • Paid Vacation and Holidays, • Company-Matched 401(k) and IRA Retirement Savings., • Per-Diem paid when overnight travel is required., • Drive time and mileage paid for use of a personal vehicle when travel is required., • Company vehicle could be provided after initial 2-4 weeks of employment.Requirements:, • Electronic Security Technician License (EST) required., • Experience as a Data Cable Technician., • Available for extensive travel nationwide., • Strong knowledge of industry standards (BICSI, NEC, TIA/EIA)., • Industry-specific certifications (BICSI, Systimax, Panduit, Beldon, Corning) are a huge plus., • Capable of reading blueprints and site maps., • Experience in CCTV, voice, and data cabling is a plus., • Excellent customer relationship and communication skills; verbal and written., • Must be comfortable working unsupervised and also effectively communicating and collaborating with teams of 4 to 20 other technicians., • Knowledgeable in identifying independent colors and learning color codes., • Ability to work in cramped spaces., • Ability to operate a BOOM or scissor lift; and ability to work at heights, of 40 plus feet., • Has basic telecommunication tools, PPE, and reliable transportation., • Must have knowledge of cabling infrastructure., • Experience in conduit installation is a plus., • Valid driver's license with a clean driving record; no DUI or DWI in the last three years.Responsibilities:, • Installation, troubleshooting, and maintenance of various cabling infrastructure., • Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work., • Ensuring all cables are neatly tied and bundled according to safety regulations., • Installing of cable support structures such as j-hooks, cable racks, and innerduct., • Repairing cable poles and towers., • Conduct tests to ensure all newly installed cables systems and component devices are operational., • Troubleshoot issues with the cable network., • Perform any other duties not specifically stated herein, but which your supervisor may assign., • Maintain the company’s high standard of quality and professionalism with regards to workmanship, customer relations, coworkers, behavior, and appearance., • Adhere to all required project safety requirements as set forth by Wachter, our customers, or OSHA.Based on experience.About: Wachter is a family-owned company since 1930 and we see each employee as a critical piece of the Wachter Family. With over 900 licenses across the country, Wachter serves commercial and industrial clients with the right technologies needed to keep them successful. We design, install, and maintain the technologies that keep businesses operating efficiently. Our team of dedicated electricians, engineers, and technicians provides electrical, data, security, communications, and automation services to clients in numerous industries. Follow us on Facebook, Instagram, Twitter, and LinkedIn. We're an equal opportunity employer. All applicants will be considered for employment without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Health insurance Core Responsibilities • System Integration: Connecting and configuring individual components (e.g., cameras, motion sensors, and access control readers) so they function as a cohesive system., • Structured Cabling: Installing, terminating, and testing copper (Cat5e/6/6A) and fiber optic cabling systems., • Programming & Commissioning: Tailoring system functionality, such as setting user permissions, configuring IP addresses, and programming automation settings (e.g., Control4, Crestron, or Lutron)., • Diagnostic & Repair: Troubleshooting complex issues in existing infrastructure using specialized tools like multimeters, cable certifiers, and network testers., • Blueprint Interpretation: Reading and updating technical drawings, schematics, and "as-built" documentation to ensure compliance with company and BICSI standards.Key Skills & Qualifications, • Technical Proficiency: Knowledge and experience in CCTV, Access Control, Fire Alarms, Intercoms, and Wi-Fi/Network infrastructure., • Physical Capability: Ability to climb ladders, work a loft, lift up to 5070 lbs, and identify wires by color., • Soft Skills: Strong communication for training end-users and collaborating with project managers or other trades., • Certifications: While not always mandatory, Control4, Lutron and any/all Smart integration systems

Job DescriptionQualifications: • Need field technicians 3+ years of experience in installing low voltage cabling and CCTV systems and TV’s., • Applicants should be computer literate, mechanically inclined, know how to use tools and have good troubleshooting skills., • Must have a valid and clean driver's license. We provide a company vehicle to job sites, vacation / sick time, and overtime., • Need field technicians 3+ years of experience in installing low voltage cabling and CCTV systems., • Experience in access control is a plus. We are a security Integrator serving NJ/NY area. We are seeking a field technician to install cable networks, CCTV and access control systems. Applicants should be computer literate, mechanically inclined, know how to use tools and have good troubleshooting skills. We provide a company vehicle to job sites, vacation/sick time, overtime. Must have a valid and clean driver's license. Compensation depends on experience. A resume must be sent to be considered.

Job DescriptionFULL-TIME JOURNEYMAN POSITION POSITION SUMMARY:Electrical Contracting Corporation is looking for an Electrician Journeyman needed for Long Island based company with commercial/government projects in Nassau, Suffolk County, some territory in the surrounding Tri-State area, and other states. POSITION RESPONSIBILITIES: • Regular attendance at assigned location; may include shop or project site., • Must have 7-10 year of experience in the electrical field and the ability to work projects without any issues., • Residential and commercial installations, maintenance, trouble shooting and repair of electrical systems., • Prepare sketches showing location or wiring and equipment, or follows blueprints, ensuring that concealed wiring is installed before completion of future walls, ceilings, and flooring., • Measures, cuts, bends, threads, assembles, and installs electrical conduit, using such tools pipe threader and conduit bender., • Oversees or participates in wire installation with conduit and cable trays., • Installs control and distribution apparatus, such as switches, relays, and circuit-breaker panels, fastening in place with screws or bolts, using hand tools and power tools., • Connects power cables to equipment, such as motor, and installs grounding leads., • Test continuity of circuit to ensure electrical compatibility and safety of components, using testing instruments, such as ohmmeter, ammeter, and oscilloscope., • Observes functioning installed equipment of system to determine hazards and need for adjustments, relocation, or replacement., • Avoid unsightly, hazardous, and unreliable wiring, consistent with specifications. Understanding of repairs of fire, water, and power surge damage to electrical systems. Knowledge of electrical codes is a must and utility rules., • Ability to work on an individual basis without the need of supervision., • Perform other routine duties as directed by workplace leader., • Participate in site housekeeping., • Travel when needed and overnight projects., • The journeyman is responsible for ensuring the work van is fully stocked for all projects and replenished by their electrician apprentices, if available. Maintain work van organized and logging work van information., • Responsible to follow through with all paperwork required that is part of the job such as work orders, images, receipts, etc., • Creating job reports including work done, work remaining, and material needed., • Must maintain and adherence to safety rules and quality., • Must have clean driving record and reliable transportation., • Must have own hand tools and able to work with other team members., • Overtime as required., • Overnight as required., • Must represent themselves and the company in a professional manner at all times., • Willingness to travel - 100% required. QUALIFICATIONS: • Minimum 7 years’ experience in Commercial and Residential., • Low voltage (CAT VI, COAX, FIRE ALARM, ETC.), 277-480 systems, and log out/tag out procedures., • Knowledge of all NYS codes and NEC codes., • Driver’s License., • High School or equivalent., • Trade school certificate or apprenticeship., • OSHA 10/30 Certification., • Log Out/Tag Out Certification OUR CORE VALUES: • Put Client’s first., • Act with integrity., • Accountability., • Transparency., • Fairness., • Teamwork. Equal Opportunity Employer. Job Salary: $34.00 - $39.00. BENEFITS: • 401K., • Paid time off., • Direct Deposit., • Holidays. SCHEDULE: • 8-hour shift., • Travel when required is a must., • Monday - Friday unless project requires weekend work., • Overnight depending on the project requirements., • Overtime as required., • Weekend availability is a must.

Job DescriptionDescription: Controlled Combustion is the leading heating contractor in NYC. We serve a variety of industries, including luxury apartments, hospitals, universities, and more. With over 150 employees, our team is as diverse as the services we offer. We’re looking for a hands on Electrical Foreman / Project Manager to oversee the electrical scope for boiler rooms, burner upgrades, controls, and capital improvement projects across NYC. Please note that this is a field first, in person role. Most time will be spent on active job sites across the five boroughs with regular visits to our Bronx headquarters. Hybrid/remote is not available for this position. Responsibilities • Lead day to day field operations for the electrical scope: plan work, set goals, assign tasks, and supervise crews and subcontractors., • Interpret plans/specs; perform layout for feeders, panels, EMT/RMC, junction boxes, equipment terminations, and control wiring., • Oversee installation, testing, and commissioning of motors, starters, VFDs, PLC adjacent control wiring, sensors, and BMS interfaces in boiler/mechanical rooms., • Coordinate closely with plumbers, HVAC techs, burner/controls technicians, and site supers to sequence work in occupied buildings., • Develop short interval schedules; attend project meetings; run daily huddles and toolbox talks., • Order, stage, and track materials, tools, and rental equipment; manage vendors for on time deliveries., • Maintain documentation: daily reports, as builts, redlines, submittals, RFIs, change orders, and closeout packages., • Enforce safety policies (OSHA, NYC DOB, site specific rules); conduct jobsite inspections and corrective actions., • Coordinate inspections and utility cutovers; interface with AHJs (DOB/Con Edison) as needed., • Drive quality control: pre functional checks, point to point testing, start up/commissioning support, and punch list closure. Schedule • Full time, Monday–Friday., • Day shift; occasional evenings/weekends for cutovers or emergencies., • Overtime as needed based on project timelines. Benefits • 401(k), • Dental insurance, • Health insurance, • Health savings account, • Paid time off, • Vision insurance Work Location In person; Bronx, NY 10458 (required). Daily travel to project sites across NYC. Requirements: Qualifications / Skills • Strong planning, organization, and crew leadership; capable of running multiple jobs at once., • Expert knowledge of the NEC and working familiarity with the NYC Electrical Code for commercial/multifamily work., • Ability to read/markup electrical drawings and risers; produce simple sketches and take offs., • Proficient with 120/208V and 277/480V three phase power distribution, motor controls, and low voltage control circuits., • Experience with VFDs, starters, interlocks, safeties, and integration with burner/boiler control systems and BMS., • Strong communication and documentation; comfortable with MS Office (Outlook/Excel/Word) and mobile project apps., • Proactive, detail oriented problem solver who thrives in fast paced, occupied environments. Certifications & Licensure • OSHA 30 (required) and NYC Site Safety Training (SST) (preferred)., • Valid NYS Driver License (required). Minimum Education & Work Experience • High school diploma or equivalent (required); completion of an electrical apprenticeship or trade school (preferred)., • 7+ years in the electrical trade with 2+ years leading crews as a foreman or assistant PM., • Experience in heating, oil & gas, boilers/burners, HVAC/mechanical rooms, or construction in NYC is a strong plus.

Job Description Position Title: Electrician Location: Brooklyn VA Medical Center, Brooklyn, NY Employment Type: Full-Time Position Start Date: August 01, 2026 Salary: Competitive Position Summary MILVETS Systems Technology, Inc. is seeking a qualified Electrician to support the Electronic Health Record Modernization (EHRM) Infrastructure Upgrades project at the Brooklyn VA Medical Center. About the company: Since its founding in 1986, MILVETS Systems Technology, Inc. has been a reliable provider of quality services in the information and technology fields. As a Service-Disabled Veteran-Owned Small Business, certified by the Small Business Administration as a Small Disadvantaged Business, the company was founded to offer efficient, cost-effective information technology services to commercial and government clients. General Experience: Minimum 5 years of experience in commercial or institutional electrical construction, with at least 2 years on federal or healthcare facility projects. Familiarity with VA Master Specifications, NFPA 70 (NEC), and federal safety protocols is essential. Functional Responsibility: Perform skilled electrical work on a federal construction site, including installation, maintenance, and inspection of electrical and Telecommunications systems in accordance with VA specifications and federal standards. Responsibilities include: • Installing EMT, RMC, and PVC conduit systems across multiple floors and fire-rated assemblies, • Supporting low-voltage systems (fire alarm, nurse call, access control) in coordination with specialty trades, • Installing cable tray, conduit, and support systems for low-voltage telecommunications equipment, • Reading and interpreting telecom plans, electrical one-lines, riser diagrams, and VA construction drawings, • Ensuring all work complies with NEC, VA design guides, and infection control risk assessment (ICRA) protocols, • Participating in daily safety briefings and maintaining clean, hazard-free work zones, • Documenting as-built conditions and redlining drawings for turnover packages, • Supporting commissioning, testing, and final inspection walkthroughs with VA CORs and QA/QC teams Minimum Education: High School Diploma or GED Qualifications: • Journeyman Level Electrician certification desired, • Demonstrated experience on VA, DoD, or other federal healthcare projects, • Proficient in conduit bending, wire pulling, panel terminations, and equipment grounding, • Familiar with seismic anchoring, bonding, and bracing of electrical systems, • Skilled in QA/QC documentation, punch list resolution, and redline markups, • Able to work in occupied healthcare environments with sensitivity to patient safety and infection control, • Understanding of VA Master Construction Specifications and ANSI/TIA-606-C labeling standards, • Experience with multi-trade coordination and adherence to federal construction sequencing and phasing plans Required: • OSHA 30 Certification (Construction Industry), • Current TB test results (IGRA), • Valid driver’s license and reliable transportation, • Ability to pass federal background screening for site access, • Familiarity with Lockout/Tagout (LOTO), Arc Flash PPE, and NFPA 70E safety practices Desired Certifications: • CPR/First Aid, • NFPA 70E Electrical Safety Training, • Manufacturer training on lighting control systems, switchgear, or backup power systems, • USACE EM 385-1-1 Safety Training (preferred for federal sites), • Scissor Lift certification Applicants for U.S. based positions with MILVETS Systems Technology, Inc. must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. www.dhs.gov/E-Verify E-Verify is a registered trademark of the U.S. Department of Homeland Security. This business uses E-Verify in its hiring practices to achieve a lawful workforce. Equal Employment Opportunity All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. MILVETS Systems Technology, Inc. is an Equal Employment Opportunity/Affirmative Action Employer and maintains a Drug-Free Workplace. MILVETS Systems Technology, Inc. (“MILVETS”) uses JazzHR Talent Fit AI to assist in candidate evaluation. This tool leverages artificial intelligence to generate insights but does not make autonomous hiring decisions. All employment decisions are made solely by MILVETS’ recruitment and management teams. Powered by JazzHR Ynm3Ugnsxf

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Flexible schedule, • Opportunity for advancement, • Training & development Job Summary We are seeking an AV/LV Technician to join our team. In this role, you will install, set up, and maintain equipment. Your responsibilities will include pulling, terminating, testing, and labeling low-voltage cabling, installing Audio-Visual, Telecommunications, and/or Security/Access Control Systems; troubleshooting equipment malfunctions; setting up and operating equipment; and coordinating with internal and client teams. The ideal candidate is creative, reliable, and has an excellent understanding of cabling, AV, LV, Security systems equipment and software. Ability to travel within the NYC/NY, NJ, and CT area with a valid driver's license Pay $27-$30/hr. Part-time position, but may be up to 40 hours a week depending on job/project schedules Responsibilities • Where applicable, pull, terminate, Test, label, and Identify Cabling (CAT-6, CAT-6A, Speaker Cable, Coax SDI/RF, Fiber) on site either during construction rough-in phase or in a finished space, • Receive deliveries, inventory on site, provide status updates to project Team, • Install TVs, Data Cabling, Speakers, Cameras, Screens, and Basic Troubleshooting. Maintain a clean site/work area., • TVs/Displays, Mounts, Projectors, Speakers, Cameras, endpoints, and other devices., • Troubleshoot equipment malfunctions and report equipment conditions to the team, • Clean and maintain equipment in excellent working condition, • Keep accurate records of equipment/cable/accessories inventory, • Experience in Audio-Video/Telecom/Data is preferred but not necessary., • On-the-job training and online training/certification courses will be provided., • OSHA 30 Card preferred - will provide OSHA training if necessary., • Company PPE providedBenefits/Perks, • Careers Advancement Opportunities, • Flexible Scheduling, • Competitive Compensation, • Company-provided iPad and/or laptop, • Overtime time, time-and-a-half eligible after 40 hours of straight time worked within 1 week or Saturday work; double time available for sundays/holidays, • Tool Stipend after 45 days of employment for work-related tools that are to be used on jobs, hand tools, workbag, and cordless tools. Must produce receipts for tools to receive a $375 Stipend. We have a tool-recommendation list that will be shared within the onboarding process; the list of tools tried by our team is updated to allow for the high quality of work we produce., • Reimbursement of job-related expenses must be submitted and approved by management., • If eligible, OSHA 30 and SST Training must be completed within 14 days of employment., • Training such as certifications for termination, cable, or tool handling will be done online/remotely, in our office, or at vendor facilities. Online/Off-Site Training will be provided when working directly with certain manufacturers' equipment that requires training., • Bonus Eligible, given at the discretion of management. Qualifications • Previous experience as an Audio Visual Technician is preferred, • Excellent computer skills, • Strong understanding of the equipment, • Creativity and attention to detail, • Physical ability to bend and lift heavy objects (up to 50lbs; team lift after 50lbs), • Ladder/Scaffold or Lift Work where required

Job DescriptionAbout the Job:Are you looking to join a fast-paced, 2nd generation family-owned General Construction & Architectural Design Firm in the middle of another significant growth phase? G-Net Construction is offering an exciting full-time opportunity for a Lead Electrician. This hands-on role is perfect for a motivated individual ready to grow and take on leadership responsibilities while working directly for us. We’re seeking someone to lead our existing team of assistant electricians and manage a variety of electrical projects, including 24/7 emergency/maintenance services. This role provides opportunities for career advancement and training, with a path to supervisory roles for those who excel. Compensation:Hourly wage is based on experience. The position is full-time, 40 hours per week, with standard work hours from 8:00 AM to 4:00 PM, Monday through Friday. Overtime is available for 24/7 emergency calls. Responsibilities: • Lead and manage electrical projects, including panel and sub-panel replacements, light fixture installations, and power feed upgrades for HVAC equipment., • Run fire alarm wiring and install fire alarm devices., • Install low voltage telephone and IT cabling, conduits, and new wall switches and outlets., • Read and interpret electrical and architectural drawings/blueprints., • Ensure compliance with NYC Electrical Building codes., • Oversee the daily use and maintenance of a company-provided van stocked with tools and materials., • Respond to 24/7 emergency service calls as needed. Qualifications: • At least 5 years of hands-on field experience in electrical and low voltage work., • Strong knowledge of NYC Electrical Building codes., • Current OSHA-40 card (SST card and FDNY Certificate of Fitness are pluses)., • Experience reading and interpreting blueprints and drawings., • Must have valid driver’s license and live on Staten Island., • Own electrical hand and power tools as well as PPE., • Experience managing a team or leading projects is a plus. Growth Opportunities:G-Net Construction offers significant career development opportunities, including advancement to supervisory roles and additional training for motivated employees. This role has room to grow within the company and the potential for greater responsibilities in the future. Application Process:To apply, please submit your resume, cover letter, and provide details on any certifications, prior projects. Qualified candidates will be contacted for an in-person interview. About G-Net Construction Corp.:For over 65 years, the Nativo Family has earned recognition as being a leader and respected in all five boroughs of New York City, providing General Contracting, Architectural and Building Maintenance Services to a variety of commercial & medical clients and nonprofit organizations. G-Net Construction specializes in several industry sectors, such as Hospitals, Nonprofit Organizations, Schools, Commercial, Medical Facilities, Mold Remediation, Fire Restoration and Sustainable projects. What We Do: • Building Construction & Interior Renovation., • Architecture & Design / Build Services., • Mold / Fire Remediation & Restoration., • Comprehensive Building Maintenance. SEO Keywords:Lead Electrician; Full-Time Electrician Jobs; Staten Island Electrician; Team Leader; Licensed Electrician; Electrical Panel Upgrades; Commercial Electrician; OSHA-40; Journeyman; Fire Alarm; Low Voltage; Electrical Code Compliance; Electrical Maintenance; Project Manager; Emergency Electrical Services; Blueprint Skills; Electrical Foreman; Commercial Electrician; Supervisor

Job Description Commercial Electrician with 5+ years of documented field experience to work on warehouse and office and other commercial projects in New Jersey. The work includes basic rough-in, conduit installation, wiring, lighting, devices, and power distribution. Responsibilities • Rough-In Installation: Install metal/PVC conduit (EMT, rigid, PVC), cable trays, and electrical boxes according to layout specs., • Blueprint & Schematic Reading: Interpret complex architectural, electrical, and structural blueprints to route systems accurately., • Wiring & Pulling: Pull main feeders, branch circuits, and low-voltage or power cabling through conduit systems., • Conduit Bending: Bend conduit by hand or using mechanical, hydraulic, and power benders to exact angles and measurements., • Code Compliance: Ensure all rough-in work strictly adheres to the National Electrical Code (NEC) and local municipal codes. Qualifications, • 5 years of verifiable experience working for a commercial electrical contractor., • Proficiency with commercial rough-in, conduit bending, wiring, and terminations., • Previous experience installing rigid and EMT conduit., • Own the tools needed for commercial electrical work., • Safety conscious, • Low-voltage experience is a plus., • Need an Aerial / Scissor lift certification, • Need OSHA 10

Job DescriptionLevel Up Your IT Career at 360 Networks! Are you an MSP pro ready to tackle complex IT challenges? At 360 Networks, we’re not just another IT company we’re a fast-growing, collaborative team where your skills are valued, your ideas make an impact, and your work directly drives client success. Benefits That Actually Matter: Healthcare costs are no joke, so we make sure you’re covered. We offer industry-leading medical plans with strong employer contributions, paid time off, professional development opportunities, and more, helping you focus on IT, not your wallet. At 360 Networks, your career growth and well-being are top priorities. Healthcare You Can Count On: We offer Horizon Blue Cross Blue Shield of New Jersey medical coverage with a low $1,500 deductible real protection that helps keep medical costs down and protects you and your family. 401(k) You’ll Want to Use: Secure your future with our Fidelity Investments 401(k) plan with up to a 4% employer match we help you build retirement savings, not just pay your bills. Time Off & Growth Support: Paid time off + professional development assistance means you recharge, level up your skills, and avoid burnout because great talent thrives when supported. Low Voltage Cabling & CCTV Technician / Installer New JerseyWe are a security integration company serving the NJ/NY area, and we're looking for an experienced Field Technician to join our growing team. If you take pride in clean installs, solid troubleshooting, and showing up ready to work, we want to hear from you. What You'll Be Doing:You'll be out in the field installing structured cabling, camera systems, TVs, and access control systems for our commercial clients across New Jersey and New York. Every day looks a little different, and that's part of what makes this role great. What We're Looking For: • 3+ years of hands-on experience installing low-voltage cabling, IP camera systems, and TVs., • Computer-literate and comfortable working with technology., • Mechanically inclined with strong knowledge of tools and equipment., • Solid troubleshooting skills to diagnose problems and get things working., • Valid driver's license with a clean driving record., • Experience with access control systems is a plus. What We Offer: • Company vehicle provided to job sites., • Vacation and sick time., • Overtime opportunities., • Compensation based on experience.

Job DescriptionBenefits: • Company car, • Competitive salary, • Opportunity for advancement, • Paid time off, • Training & development Duties include: Installation, troubleshooting, repair, and termination of Cat 5e, 6, coax, and fiber optic cables. Experience with video & security systems, including running video/audio cabling, DVR system setup & troubleshooting is a major plus. Experience with running phone lines, punch down blocks, & line/extension troubleshooting is a major plus. Experience with patch panel Installation Use of test equipment and appropriate hand tools as needed during installation or repair. Updating documentation, as appropriate, for customer and other technicians. Successful candidates will have: Must have valid Drivers license. Must Have their own personal tools; small personal drill, crimper, punch down, P-touch Labeler, wire map tester , etc. excluding Certifiers and Power Tools. Proficiency with testing equipment. Working knowledge of current cabling standards and codes. Professional appearance and demeanor. Must be a team player as our techs often work together Strong communication skills. Physical ability to lift up to 60 pounds and work on ladders. Job Type: Full-time Experience: • relevant: 1 year (Preferred) Work Location: • Multiple locations Pay Frequency: • Bi weekly or Twice monthly Schedule: • Monday to Friday, • Weekends (sometimes), • Day shift, • Night shift, • Overtime

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! Wachter is accepting applications for Low Voltage Service Technicians for service work at various locations across the United States. We seek self-motivated and reliable technicians for service and special installation projects, who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Benefits Package: Company Paid! • Medical, Dental, Prescription & Vision Benefits, • Life, AD&D, and LTD insurance, • Paid Vacation and Holidays, • Company-Matched 401(k) and IRA Retirement Savings, • Per-Diem paid when overnight travel is required, • Drive time and mileage paid for use of a personal vehicle when travel is required, • Company vehicles could be provided after an initial 2-4 weeks of employment Requirements:, • Data Cable Technician with CAT5e, fiber optic, and network experience., • Industry-specific certifications (BICSI, Systimax, Panduit, Beldon, Corning) are a huge plus., • Duration and schedule of hours will vary daily. Example: Some days will be 0-4 hour shifts, while other days shifts could be 10-14 hours. Shifts can occur in early mornings, nights, and weekends depending on the customer’s requirements and scope of work., • Flexible and willing to work on-call, early morning, day, night, and weekend shifts depending on the requirements of the job., • Regional travel within a 2 to 4 hours radius is required daily. Travel beyond 4 hours will be required occasionally and may require hotel stays., • Extended travel away from home may be necessary, typically not exceeding 1-2 weeks in duration., • Experience in low voltage cabling, smart hands network replacement, telephony, CCTV, and point-of-sale equipment is a plus., • Excellent customer relationship and communication skills; verbal and written., • Knowledgeable in identifying independent colors and learning color codes., • Ability to work in cramped spaces., • Ability to operate a BOOM or scissor lift, and ability to work at heights., • Has basic telecommunication tools, PPE, and reliable transportation., • Must have knowledge of cabling infrastructure., • Experience in conduit installation is a plus., • Valid driver's license with a clean driving record; no DUI or DWI in the last three years.Responsibilities:, • Installation, troubleshooting, and maintenance of various cabling infrastructure., • Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work., • Ensuring all cables are neatly tied and bundled according to safety regulations., • Installing of cable support structures such as j-hooks, cable racks, and innerduct., • Conduct tests to ensure all newly installed cable systems and component devices are operational., • Troubleshoot issues with the cable network. Based on experience. About: Wachter is a family-owned company since 1930 and we see each employee as a critical piece of the Wachter Family. With over 900 licenses across the country, Wachter serves commercial and industrial clients with the right technologies needed to keep them successful. We design, install, and maintain the technologies that keep businesses operating efficiently. Our team of dedicated electricians, engineers, and technicians provides electrical, data, security, communications, and automation services to clients in numerous industries. Follow us on Facebook, Instagram, Twitter, and LinkedIn. We're an equal opportunity employer. All applicants will be considered for employment without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Position Title: Inside Out-side Plant - Low Voltage Technician Location: Brooklyn VA Medical Center, Brooklyn, NY Position Start Date: August 01, 2026 Employment Type: Full-Time Salary: Competitive Position Summary MILVETS Systems Technology, Inc. is seeking a qualified Inside Out-side Plant - Low Voltage Technician to support the Electronic Health Record Modernization (EHRM) Infrastructure Upgrades project at the Brooklyn VA Medical Center. About the company: Since its founding in 1986, MILVETS Systems Technology, Inc. has been a reliable provider of quality services in the information and technology fields. As a Service-Disabled Veteran-Owned Small Business, certified by the Small Business Administration as a Small Disadvantaged Business, the company was founded to offer efficient, cost-effective information technology services to commercial and government clients. General Experience: Over 5years’ experience on large scale complex information technology cabling and infrastructure projects (Layer 1). Functional Responsibility: Responsible for installing fiber, copper, and hardware installation for large scale cabling and infrastructure projects from start to finish. Reading and interpreting project drawings, ensuring quality work, and documenting daily work. Installing conduit and cable tray, terminating network cabling in accordance with BICSI standards. Completing projects by deadlines to ensure on time completion. Minimum Education: High School Education or GED with 10 years of experience or - Associates degree with 5 years of experience Qualifications: Successful candidates will possess the ability to execute highly detailed and precise work under tight deadlines. Perform skilled structured cabling work in the installation, service, maintenance, repair and alteration of low voltage category cabling, fiber optic cabling, and various other low voltage cabling systems. This will include the physical removal and/or installation of structured cabling components, including, but not limited to pathway systems like conduit and cable trays, racks, and faceplates, terminating, testing, and troubleshooting of Low Voltage Cabling Fiber Optics, Coax and Cat 6a cable. Must be able to use Fluke Certifier for both Cat6A and fiber testing. Experience working in a hospital environment is an additional advantage Help and assist with developing and implementing strategies for the installation, configuration, and maintenance of all telecommunications systems and networks. Responsible for the installation of communications cabling and equipment in accordance with all applicable plans, specifications, codes, and standards. Experience with various hand tools and power tools, a basic understanding of Telecom Systems, blueprints, and knowledge of codes and standards. A thorough understanding of UPS's, racks, cabinets, PDU's, grounding, bonding, and grounding systems. Will work in a team environment to facilitate installing cable from Telecommunication Rooms (TR) to work area outlets (WAO) while following drawings and run lists to ensure cables are installed methodically and arranged in proper bundles at TR for ease of dressing and termination. Ensure TRs, racks, and cabling are all labeled in accordance with ANSI/TIA-606-C. Reports project status to the project Forman and to the Project Manager. Care for and properly maintain tools and test equipment. Ensure daily clean up. Take steps to reduce or eliminate site hazards for the team and bystanders. Operate in a safe manner at all times and wear all PPE required. This position must be familiar with ANSI/TIA standards, Fluke Testers, and Master Construction Specifications. (Design-Build construction projects.) Familiarity with the seismic zones and proper bracing and anchoring of installed equipment. Perform installation work for all pathways and support systems, including multi floor pathways and penetrations for Fiber Optical Cable / Copper Backbones for very large buildings up to 1,000,000 sq ft. Perform QA Inspections of the wiring installations during final site inspections; ensure compliance of manufacturer, industry, NEC, and customer design standards. Identify, document, and report all issues and errors to company leadership. Design outside plant cabling pathways including wall and/or floor conduit penetrations. Work with the customer and prime contractor on the Fiber and Copper to be installed, terminated, tested, and how the test results will be delivered. Experience with OSP (Outside Plant) phases of telecommunications construction projects is highly desired. Desired Certifications: • BICIS Copper/Fiber certification Required: • OSHA 10 Certificate or card, • TB blood tests results, (also called interferon-gamma release assays or IGRAs) Applicants for U.S. based positions with MILVETS Systems Technology, Inc. must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. www.dhs.gov/E-Verify E-Verify is a registered trademark of the U.S. Department of Homeland Security. This business uses E-Verify in its hiring practices to achieve a lawful workforce. Equal Employment Opportunity All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. MILVETS Systems Technology, Inc. is an Equal Employment Opportunity/Affirmative Action Employer and maintains a Drug-Free Workplace. MILVETS Systems Technology, Inc. (“MILVETS”) uses JazzHR Talent Fit AI to assist in candidate evaluation. This tool leverages artificial intelligence to generate insights but does not make autonomous hiring decisions. All employment decisions are made solely by MILVETS’ recruitment and management teams. Candidate data processed through JazzHR Talent Fit AI is handled in compliance with applicable privacy and data protection regulations, including GDPR, and MILVETS’ internal policies. MILVETS is an Equal Opportunity Employer (EOE) and complies with all relevant EEOC regulations to ensure fair and equitable hiring practices. By applying, candidates acknowledge and consent to the use of this tool for recruitment purposes. Powered by JazzHR GbxTHVVkPr

Job Description Lighting & Shade Technician Department: Lighting & Shading Reports To: Director of Lighting & Shading Location: Field / Project Sites, NYC Metro Area Employment Type: Full-Time Position Summary The Lighting & Shade Technician is a field based position within the ATS Lighting & Shading department. This role supports the installation, activation, testing, programming, commissioning, troubleshooting, and punch out of lighting control, Ketra lighting, linear lighting, and motorized shade systems on high end residential, commercial, and hospitality projects. The technician will work on active construction sites and finished spaces to verify wiring, install and activate devices, assist with programming, test system operation, document field conditions, and complete assigned punch list items. Work will be performed under the direction of the Director of Lighting & Shading and in coordination with ATS project management, Ostroff Electrical, general contractors, electricians, and other trades. Core Responsibilities Field Installation and Device Activation • Install, mount, terminate, and activate lighting control devices, keypads, processors, gateways, antennas, shade power supplies, and related low voltage control equipment within ATS scope., • Assist with panel trim out, module activation, device addressing, and field verification of lighting control equipment., • Terminate and dress low voltage wiring for keypads, sensors, shade motors, gateways, processors, and control interfaces., • Install temporary keypads, temporary engravings, final keypads, faceplates, and related finish devices as required., • Install, adjust, and test motorized roller shades, drapery tracks, fascia, hem bars, and related shade components., • Assist with Ketra, Rania, Lumaris, and other controllable lighting fixtures where included in ATS scope., • Coordinate with Ostroff Electrical or the project electrician for line voltage terminations, breaker work, fixture wiring, and other electrical work outside the technician’s direct scope., • Identify and report wiring issues, missing terminations, shorts, incorrect landings, damaged devices, missing parts, and other field conditions that affect system operation. Programming, Commissioning, and Testing • Assist with field programming and commissioning of Lutron HomeWorks QSX, RadioRA 3, Ketra, Rania/Lumaris, and Sivoia QS / wireless shade systems., • Load, test, and update programming files as directed., • Activate devices in Lutron Designer and related software platforms., • Test keypad functions, room control, scenes, timeclock events, shade groups, shade limits, and overall system operation against approved documentation., • Confirm that keypad button functions match approved engraving reports and client intent., • Adjust shade limits, groups, presets, and alignment as required., • Verify RF coverage, processor communication, gateway communication, and device response throughout the project., • Flash and test lighting loads to confirm proper circuit assignments, dimming response, and keypad control. Troubleshooting and Punch List • Troubleshoot dimming issues, communication failures, shade response issues, RF coverage issues, incorrect wiring, and device faults., • Perform room by room testing of active keypads, lighting zones, shades, sensors, and system functions., • Document open items clearly, including issues caused by wiring, fixture compatibility, missing devices, incomplete construction, or work by others., • Support project punch walks and complete assigned punch list items., • Respond to service calls, warranty items, and post commissioning troubleshooting as assigned., • Coordinate return visits with the Director of Lighting & Shading, project manager, or field team. Documentation and Communication • Maintain accurate field notes, as built information, and daily progress updates., • Report scope gaps, missing material, damaged equipment, construction conflicts, and schedule concerns in a timely manner., • Document device locations, wiring conditions, shade conditions, load issues, and unresolved punch items., • Communicate professionally with site supervisors, electricians, general contractors, designers, client representatives, and internal ATS/OE staff., • Provide clear photos and written updates when field conditions require review by the Director of Lighting & Shading., • Track material used, material needed, and equipment requiring replacement or follow up. Required Qualifications • Minimum 2 years of field experience with lighting control, low voltage systems, motorized shades, AV systems, electrical systems, or related construction technology., • Ability to read and work from lighting control drawings, shade drawings, panel reports, keypad reports, device schedules, and bills of material., • Working knowledge of low voltage wiring practices., • Ability to identify basic wiring issues, device issues, communication issues, and installation conflicts., • Comfortable using laptops, mobile apps, programming software, device discovery tools, and field documentation tools., • Ability to work independently on active construction sites while following direction from ATS leadership., • Professional communication skills with clients, general contractors, electricians, and other trades., • Valid driver’s license and reliable transportation to the Valley Stream office, staging locations, and NYC metro project sites., • Ability to lift 50 lbs, work from ladders, carry tools and equipment, and work in unfinished construction environments. Preferred Qualifications • Hands on experience with Lutron lighting control or shading systems., • Experience with Lutron HomeWorks QSX, RadioRA 3, Sivoia QS, Palladiom shades, or Lutron Designer., • Experience with Ketra, Rania, Lumaris, or other tunable lighting systems., • Experience with motorized shade installation, shade limit setting, fabric alignment, fascia installation, and drapery track setup., • Familiarity with high end residential construction standards and finished space expectations., • Familiarity with RF troubleshooting, processor communication, gateways, and network connected control systems., • Lutron certification or willingness to obtain certification., • Exposure to RFIs, submittals, punch lists, change orders, and field reports. Work Environment and Schedule This is a field based position. Project sites are located throughout New York City, Long Island, Westchester, and the surrounding metro area. The technician will work on active construction sites, finished residences, commercial spaces, hospitality projects, and service locations. The standard schedule is Monday through Friday. Overtime, early starts, late days, or occasional off hours work may be required based on project milestones, site access, client availability, or system commissioning requirements. Tools, equipment, staged materials, and company resources will be coordinated through the ATS/OE operations facility in Valley Stream, NY. Compensation and Benefits Compensation is commensurate with experience. ATS offers a competitive package including: • Competitive hourly rate based on experience., • Health benefits., • Paid time off and company holidays., • Manufacturer training and certification support., • Opportunity for advancement within the Lighting & Shading department. Automated Technology Systems An Ostroff Electrical Company Valley Stream, NY

Job Description Job description About The Job Fortis Institute in Wayne, NJ is seeking an experienced, highly motivated Electrical Systems Technician Program Instructor to join its faculty. If you possess a desire to help others succeed, this is an opportunity for you to positively impact the lives and careers of our students and graduates. Fortis Institute provides educational programs that deliver real-life career skills in high demand occupations that lead to employment upon graduation and a lifetime of professional growth. Join Our Team as an Instructor! Location: Fortis Institute, Wayne, NJ Company: Fortis Institute Job Type: Full-time or Part-Time Pay: From $30.00 per hour + Are you an experienced Electrical Systems Technician with a passion for teaching? Fortis Institute, in Wayne, NJ, is looking for dedicated professionals to join our team as Full-Time or Part-Time Instructors. Why Join Us? Impact Lives: Share your knowledge and experience with aspiring electrical system technicians. Flexible Schedule: Choose between day or evening shifts to fit your lifestyle. Competitive Pay: Earn from $28.00 per hour with excellent benefits. Key Responsibilities: · Teach and mentor students in both classroom and lab settings. · Ensure the training lab is prepared, clean, and stocked with supplies. · Assist students in mastering clinical lab procedures and ensure safety compliance. · Maintain regular and reliable attendance. What We’re Looking For: · Experienced EST professionals with Data, Voice, Video Cabling experience, as well as Alarm Systems. Along with Low Voltage Residential Wiring. · Strong communication and organizational skills. · A minimum of 3 years of industry experience or recent graduates from a related postsecondary program. · Provide academic advising to students · Assist the program chair and participate in departmental training, meetings and graduation. · A diploma or degree in the specific discipline. Benefits: · 401(k) · Dental, Health, and Vision · Life insurance · Paid time off · Retirement plan \nCompany Description Fortis provides postsecondary career education to both traditional and nontraditional students through a variety of certificate and degree programs that assist adult students in enhancing their career opportunities and improving problem-solving abilities. Fortis strives to develop within its students the desire for lifelong and continued education. The staff at Fortis believes that they make an important contribution to the economic growth and social well-being of the area. Fortis educates its students to help meet the economic needs of their community in entry-level positions. The educational process is a change-oriented approach to education that provides the community with graduates who possess the skills and knowledge needed to succeed in existing and emerging career occupations. The following goals are integral to the mission of Fortis : • To develop each student’s individual and professional growth, including written and interpersonal communication, critical thinking, and problem-solving competencies. • To develop each student’s professional attitude and an awareness of contemporary career practices through exposure to pragmatic course content. • To promote self-discipline and motivation so that students may enjoy success in their career and in society. • To attract and retain effective and qualified instructors who are familiar with current medical and/or technical practices, and who motivate and develop students. • To offer sound certificate and degree programs. • To maintain a dynamic organization that is responsible and responsive to its constituencies. • To minimize economic disadvantages as a barrier to postsecondary education by providing financial aid services and by accepting students without regard to age, sex, religion, race, physical challenges, or economic or social background. • To assist graduates in finding positions for which they are trained. Fortis provides postsecondary career education to both traditional and nontraditional students through a variety of certificate and degree programs that assist adult students in enhancing their career opportunities and improving problem-solving abilities. Fortis strives to develop within its students the desire for lifelong and continued education. The staff at Fortis believes that they make an important contribution to the economic growth and social well-being of the area. Fortis educates its students to help meet the economic needs of their community in entry-level positions. The educational process is a change-oriented approach to education that provides the community with graduates who possess the skills and knowledge needed to succeed in existing and emerging career occupations. The following goals are integral to the mission of Fortis : • To develop each student’s individual and professional growth, including written and interpersonal communication, critical thinking, and problem-solving competencies. • To develop each student’s professional attitude and an awareness of contemporary career practices through exposure to pragmatic course content. • To promote self-discipline and motivation so that students may enjoy success in their career and in society. • To attract and retain effective and qualified instructors who are familiar with current medical and/or technical practices, and who motivate and develop students. • To offer sound certificate and degree programs. • To maintain a dynamic organization that is responsible and responsive to its constituencies. • To minimize economic disadvantages as a barrier to postsecondary education by providing financial aid services and by accepting students without regard to age, sex, religion, race, physical challenges, or economic or social background. • To assist graduates in finding positions for which they are trained.

Job Description Digistallers Inc. is an open platform for Digital Signage, Audio Video Technicians, and Electrical Engineers, who are seeking contractor work. We are seeking a licensed and experienced Electrician Contractor to lead and manage electrical installations, repairs, and maintenance projects. The ideal candidate will have a strong background in residential, commercial, and industrial electrical work, with the ability to oversee teams, ensure quality compliance, and deliver projects on time and within budget. We deploy contractors across the New York Tri-State Area, CT, Pennsylvania, and New Jersey, and we are actively hiring contractors to train and deploy immediately to work orders. If you are interested in growing your career , please contact Lynn at 917-302-6449 or Charlie at 917-524-6129. You must meet the below requirements to be considered for contractor work. • MUST HAVE A FRIENDLY & PROFESSIONAL ATTITUDE!!!!!!!!!!, • Must be legally permitted to work in the USA., • Read and interpret blueprints, technical diagrams, and specifications, • Ensure all work adheres to local electrical codes and safety standards, • Estimate materials and labor required for projects, • Troubleshoot and resolve complex electrical issues, • Collaborate with clients, suppliers, and other tradespeople, • Must know how to troubleshoot offline media players (CAT 5 / 6 Tester)., • Must have Digital Menu Board experience., • Must have own tools., • Must have own laptop., • ABSOLUTELY MUST own truck, SUV, or mini van. Experience with the following: • MUST HAVE EXPERIENCE Mounting TV/Screens. (Do Not Apply if you don't have this experience)., • Previous work experience with cable installation is a plus., • Valid electrician license/contractor license in [State/Region], • Proven experience as an electrician, with leadership/contracting experience preferred, • Strong knowledge of electrical systems, tools, and safety procedures, • Ability to read schematics and technical diagrams, • Excellent problem-solving and communication skills, • Valid driver’s license and reliable transportation, • Fiber experience a plus. Company DescriptionDigistallers Inc. is an open platform for Digital Signage & Audio Video Technicians, who are seeking contractor work. We deploy contractors across the New York Tri-State Area, and we are actively hiring contractors to train and deploy immediately to work orders.Digistallers Inc. is an open platform for Digital Signage & Audio Video Technicians, who are seeking contractor work. We deploy contractors across the New York Tri-State Area, and we are actively hiring contractors to train and deploy immediately to work orders.

Job Description EJS Home Automation Installation Low Voltage Technician/Installer-Control 4, Savant, Lutron A great opportunity with a fast-growing Low Voltage Installation Company. We design and install Full Home Automation Systems, Electronic Shades, Alarm Systems and Cameras, Audio-Video, Networking Gear. Our High End residential and Commercial projects are located in Brooklyn, Long Island, Manhattan and New Jersey. If you have Experience in: • Pulling low voltage cable and Terminating, Cat 6, Coax, Quad, Speaker Cable -Installing and Programming Alarm Panels -Trouble Shooting Full-time Non-Union Must be Legal to work in the US Must have Valid Drivers License Requirements: • Must be able to climb ladders up to 20’ high., • Must be able to lift and carry at least 50 lbs., • Clean Driver’s license is a MUST., • Understanding of video, audio, and control connectors and cabling., • Must be able to work in small spaces and on uneven surfaces. Other information: • Primary Location: Brooklyn, NY, • Working Days: Mon, Tue, Wed, Thu, Fri, • Working Hours Start: 9:00 AM, • Working Hours End: 5:00 PM, • Schedule: Full-time

Job Description $38$48/hour | Full-time | Bronx & Westchester County, NY About You and Us Heating & Air Conditioning You and Us Heating & Air Conditioning is a growing residential and light-commercial HVAC company serving the Bronx, Westchester County, and surrounding areas. We handle HVAC repair, equipment replacement, boilers, furnaces, central AC, heat pumps, mini-splits, hydronic systems, water heaters, ductwork, indoor air quality, and preventive maintenance. Comfort You Can Count On. Every Season. We're looking for a complete Lead HVAC Installer who can take an installation from equipment placement all the way through wiring, startup, and commissioning, without needing the owner onsite. This is not a ductwork-only or piping-only role. Compensation & Benefits $38$48/hour, based on experience and demonstrated ability Paid vacation and paid sick days Performance incentives Advancement opportunities with a growing company What You'll Do Lead residential and light-commercial HVAC installations Install furnaces, air handlers, condensers, heat pumps, mini-splits, boilers, and hydronic equipment Perform ductwork modifications, equipment transitions, drains, and refrigerant piping Complete nitrogen brazing, pressure testing, evacuation, charging, and leak testing Perform high- and low-voltage wiring Work with control boards, thermostats, communicating systems, and safety circuits Independently start up and commission equipment Test airflow, temperature split, static pressure, and system performance Diagnose and correct installation or control problems Complete startup sheets, photos, and installation documentation Conduct professional customer walkthroughs Lead and train helpers and part-time installers Keep jobsites, company tools, and equipment clean and organized What We're Looking For 5+ years of HVAC installation experience EPA Universal certification Strong electrical, control-wiring, and troubleshooting ability Able to complete an installation and startup independently Experience with furnaces, boilers, central air, heat pumps, and mini-splits Valid driver's license and acceptable driving record Professional appearance and strong customer-service skills Reliable attendance and strong work ethic Preferred Light-commercial experience Hydronic air-handler and boiler experience Combustion-testing experience Experience leading and training installation crews Schedule Full-time. Occasional evenings, weekends, or scheduled emergency coverage as needed. Why You and Us? We're building a team of reliable professionals who communicate well, respect customers, keep clean work areas, and want to grow with the company. If you're a complete installer who takes pride in a clean, properly commissioned system, we'd love to hear from you. Work Location: Bronx, NY / Westchester County and surrounding areas refk1 refw2643k1

Job Description $38–$48/hour | Full-time | Bronx & Westchester County, NY This role requires an EPA Universal certification and 5+ years of HVAC installation experience, including startup and commissioning on your own. About You and Us Heating & Air Conditioning You and Us Heating & Air Conditioning is a growing residential and light-commercial HVAC company serving the Bronx, Westchester County, and surrounding areas. We handle HVAC repair, equipment replacement, boilers, furnaces, central AC, heat pumps, mini-splits, hydronic systems, water heaters, ductwork, indoor air quality, and preventive maintenance. “Comfort You Can Count On. Every Season.” We're looking for a complete Lead HVAC Installer who can take an installation from equipment placement all the way through wiring, startup, and commissioning, without needing the owner onsite. This is not a ductwork-only or piping-only role. Compensation & Benefits $38–$48/hour, based on experience and demonstrated ability Paid vacation and paid sick days Performance incentives Advancement opportunities with a growing company What You'll Do Lead residential and light-commercial HVAC installations Install furnaces, air handlers, condensers, heat pumps, mini-splits, boilers, and hydronic equipment Perform ductwork modifications, equipment transitions, drains, and refrigerant piping Complete nitrogen brazing, pressure testing, evacuation, charging, and leak testing Perform high- and low-voltage wiring Work with control boards, thermostats, communicating systems, and safety circuits Independently start up and commission equipment Test airflow, temperature split, static pressure, and system performance Diagnose and correct installation or control problems Complete startup sheets, photos, and installation documentation Conduct professional customer walkthroughs Lead and train helpers and part-time installers Keep jobsites, company tools, and equipment clean and organized What We're Looking For 5+ years of HVAC installation experience EPA Universal certification Strong electrical, control-wiring, and troubleshooting ability Able to complete an installation and startup independently Experience with furnaces, boilers, central air, heat pumps, and mini-splits Valid driver's license and acceptable driving record Professional appearance and strong customer-service skills Reliable attendance and strong work ethic Preferred Light-commercial experience Hydronic air-handler and boiler experience Combustion-testing experience Experience leading and training installation crews Schedule Full-time. Occasional evenings, weekends, or scheduled emergency coverage as needed. Why You and Us? We're building a team of reliable professionals who communicate well, respect customers, keep clean work areas, and want to grow with the company. If you're a complete installer who takes pride in a clean, properly commissioned system, we'd love to hear from you. Work Location: Bronx, NY / Westchester County and surrounding areas

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge and technology power our connected ecosystem of health, safety and security solutions and services. POSITION SUMMARY As an Applications Engineer, you will need to formulate an engineered estimate and or budget for new and existing clients that shall be provided by consultants, engineers, construction managers, general contractors and also from in-house Sales Representatives, Key Account Representatives and or Project Managers. SCOPE OF RESPONSIBILITY • Analyze and interpret blueprints, specifications, and scope documents for fire and security system projects., • Prepare detailed cost estimates for labor, materials, and equipment for alarm systems, CCTV, access control, and other low-voltage installations., • Conduct take-offs and identify potential value-engineering alternatives to reduce costs without sacrificing quality., • Collaborate with vendors and subcontractors to source competitive pricing., • Develop bid proposals, ensuring all required documentation is submitted on time., • Partner with sales and project management teams to ensure seamless project handoffs., • Maintain an up-to-date pricing database., • Keep current with changes in industry codes, technology advancements, and competitive practices. Qualifications • Minimum 5 years of experience estimating in the fire alarm and/or security/low voltage field., • Education BA Business/ BS Engineering/MS Engineering or applicable amount of experience in the appropriate field may be substituted for the educational background, • Strong understanding of relevant codes, including NFPA and NEC., • Ability to read and interpret detailed construction drawings and scope documentation., • Experience working with major manufacturers (e.g., Silent Knight, Firelite, Bosch, Hanwha, Avigilon, Axis, Genetec, Lenel, and others)., • High level of organization and accuracy with strong attention to detail., • Excellent communication and time management skills., • NICET Certification- Fire Alarm Systems Level III or higher, preferred., • Computer skills to include:, • MS Office, • Acrobat, • Visio, • DWG Writer, • Big Machines, • SalesForce ESSENTIAL FUNCTIONS • Product selection and application (to ensure the right product is used in the right application) while maintaining adherence to Securitas’s product selection process and design standards., • Estimate installation costs in conjunction with Implementation Operations, Service Operations, Internal Labor and External Labor, • Review of Field Site Survey documents and drawings., • Supports the RFI, RFP, RFQ and RFM&S process as needed, • Create estimates and budgets for access control, intrusion, CCTV, intercom, PSIM, PLC and structured cabling systems, • Review architectural, electrical, telecommunication, security engineering floor plans, riser drawings, device schedules, detail drawings, interconnect and closet layout drawings., • Interpret specifications, addendums, revisions, sketches and Scope of work., • Work with project managers and design engineers for creating change orders on existing and ongoing projects., • Manage assigned projects and maintain deadlines for each project., • Build and maintain a good relationship with coworkers, suppliers and manufacturers., • Create a detailed list of clarifications, exclusions & compliance on a per project basis, • Knowledge of construction schedules, project meetings and how they pertain and impact the project., • Able to research product information utilizing the internet, • Excellent working knowledge of construction industry conventions, • Good understanding of workload and the requirements to maintain commitments., • Ability to navigate high value job environment for time lines, and compliance requirements, • Firm grasp of the competitive environment and strategic plays by competitors, • Excellent command and knowledge of building code requirements Securitas Technology Offers Comprehensive Benefits Including • Opportunity for annual merit pay increases, • Paid company training, • Medical, Dental, Vision, Life, Critical Illness, and Hospital Indemnity Coverage, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job Description Join a Family That’s Built to Last — and Grow. Mason Technologies has been a trusted leader in the low voltage industry for over 23 years and will continue to be for the next 150. If you're looking to join one of the most progressive and rapidly growing companies in the field, you're in the right place. With multi-year contracts and an ever-expanding portfolio of major projects, Mason offers unmatched stability and career potential. Tired of feeling stagnant in your current role? At Mason, we value experience, reward talent, and invest in our people. As we enter a new phase of unprecedented growth, we're seeking the best technicians to grow with us. Please Note: All applicants must have a reliable vehicle and possess a valid SST card (Site Safety Training) at the time of application. You will be required to upload a clear photo of your SST card along with your resume to be considered. Best-in-Class Benefits We believe in investing in our people and providing a comprehensive benefits package that supports you both on and off the job. • Medical, Dental & Vision Insurance, • 401(k) with Company Matching, • Paid Time Off (PTO) including holidays, vacation, sick, and personal time, • Union Affiliation, • Unlimited Opportunities for Growth and Career Advancement, • Competitive Compensation, • Ongoing Training and Professional Development, • Stable, Long-Term Career Opportunities Position Overview Mason Technologies is seeking experienced Structured Cabling & Conduit Technicians to join our growing field team. We are looking for skilled professionals with 4+ years of hands-on commercial experience installing structured cabling systems and conduit infrastructure in commercial construction environments. This is a field-based position working on commercial projects throughout the New York metropolitan area. We are open to qualified applicants throughout the Tri-State Area who are willing and able to travel to project sites throughout the region. The ideal candidate is dependable, takes pride in the quality of their work, understands industry installation standards, and can work independently or as part of a larger project team. Responsibilities • Install, pull, route, dress, label, and secure Category 5e, Category 6, Category 6A, fiber optic, and other low-voltage cabling, • Install EMT, rigid, flex, and other conduit systems in accordance with project specifications and electrical codes, • Install cable tray, J-hooks, sleeves, supports, and pathway infrastructure, • Accurately read and interpret blueprints, floor plans, riser diagrams, and project drawings, • Perform cable terminations, testing, certification, and troubleshooting, • Install and maintain telecommunications rooms, racks, cabinets, ladder rack, and related infrastructure, • Ensure cable management and labeling standards are consistently followed, • Identify and resolve installation issues in the field, • Maintain a clean, organized, and safe job site, • Work independently or alongside Foremen, Lead Technicians, and Project Managers, • Follow all company, customer, and job-site safety requirements, • Travel between various project sites throughout the Tri-State Area as required Qualifications • 4+ years of commercial structured cabling and conduit installation experience required, • Extensive experience with:, • Structured Cabling Systems (Cat5e, Cat6, Cat6A), • Fiber Optic Cabling, • EMT and Conduit Installation, • Cable Tray and Pathway Systems, • Cable Termination, Testing, and Certification, • Ability to read and understand blueprints, drawings, and project documentation, • Knowledge of structured cabling installation standards and best practices, • Experience using common hand tools, power tools, and testing equipment, • OSHA and SST certifications required, • Strong attention to detail and quality workmanship, • Reliable personal vehicle required, • Ability and willingness to travel to project sites throughout the Tri-State Area, • Ability to work safely on ladders, lifts, and in active construction environments, • Must be able to pass a pre-employment background check and drug screening To Apply: Please complete the application form and attach both your resume and a clear photo of your physical SST card to be considered. Salary: $25.00-$40.00 per hour Job Type: Full-time, Field-based

Job Description- 5 years minimum experience in low voltage installations.- Experience with installing cable support hardware.- Experience with Ethernet pin-out for category 6 cables.- Experience with utilizing cable certification tools.- Experience with reading and utilizing a low-voltage architectural floor plan.- Experience with installing IT room cabling support/management components.- A team player.- Proficient in using hand tools and power tools.- NYS driver's license required.- OSHA 30 plus SST certification required.

Job Description Job Summary We are seeking experienced Low Voltage Technicians to join our growing team. The ideal candidate will have experience installing, terminating, testing, and troubleshooting low voltage systems in commercial environments. Technicians will work on projects involving structured cabling, data centers, security systems, access control, surveillance cameras, and audiovisual installations. This is an excellent opportunity to work with a company that supports large-scale commercial construction, technology, and data center projects throughout the region. Responsibilities • Install, route, and secure Cat5e, Cat6, Cat6A, and fiber optic cabling., • Terminate and test copper and fiber cabling systems., • Install and dress patch panels, racks, cabinets, and cable management systems., • Read and interpret blueprints, floor plans, and wiring diagrams., • Install and support security cameras, access control systems, and other low voltage devices., • Label and document cable installations according to project specifications., • Perform cable testing using Fluke testers and other industry-standard equipment., • Maintain a clean and safe work environment., • Work independently or as part of a team to meet project deadlines., • Communicate effectively with project managers, customers, and fellow technicians. Qualifications • 2+ years of commercial low voltage installation experience preferred., • Experience with structured cabling, voice and data systems, or data center environments., • Ability to terminate RJ45 connections and patch panels., • Experience pulling cable through conduit, cable tray, and open ceilings., • Ability to read construction drawings and cable schedules., • Familiarity with TIA/EIA standards., • Reliable transportation and valid driver's license preferred., • Ability to lift 50 pounds and work on ladders and lifts., • OSHA 10 or OSHA 30 certification is a plus., • Manufacturer certifications are a plus but not required. Preferred Experience • Structured Cabling, • Data Centers, • Access Control, • CCTV / Surveillance Systems, • Fiber Optic Installation and Termination, • Audio Visual (AV) Systems, • Commercial Construction Projects Benefits • Competitive pay, • Weekly pay, • Overtime opportunities, • Long-term project opportunities, • Career advancement potential, • Health benefits available, • Referral bonus program About Us We are a specialized low voltage staffing and workforce solutions provider supporting commercial construction, technology, security, and data center projects nationwide. We partner with leading contractors, integrators, and technology firms to provide skilled technicians for projects of all sizes.

Job Description Industrial Maintenance Technician Job Description The Industrial Maintenance Technician Position is responsible for performing ongoing equipment and facility maintenance, monitoring and adjusting bath chemistries, and completing equipment repairs. This is a critical support position for an ISO9001 registered company providing metal finishing services for a broad range of manufacturing sectors in the greater northeastern US. Pay range based on experience and qualifications. Responsibilities include: 1. Maintaining Equipment: Diagnose and maintain operational equipment status through use of the ISO9001 system, Perform work orders as needed., 2. Maintaining Process Chemistries: Taking and recording critical processing parameters and adjusting as needed to ensure proper cleaning and coating., 3. Fixing Machinery: Repairing various machinery, conveyors, and fork lifts, to include pneumatic and hydraulic systems. Also various coating equipment ensuring it operates efficiently. Perform emergency repairs as needed, overtime required as necessary., 4. Plumbing and Heating: Addressing broken or leaking plumbing to prevent water damage and restore water fixtures. Maintaining heating systems., 5. Electrical Systems: high voltage 480V cabinets, motors, pumps and low voltage 110V. Working knowledge of PLC’s a plus., 6. Housekeeping: Maintain a safe and clean work location, tools, and a clean up after repairs. Qualifications: · Position is for an individual with industrial experience · Working knowledge of industrial machinery, process chemistry, plumbing, electrical systems, and safety standards. Experience with lab equipment a plus. · Proven experience with power tools. Welding a plus. · Critical thinking approach to problem solving. · Technical education, training, and certificates a plus. · A driver’s license is a plus Benefits: · Competitive pay and bonuses. · Comprehensive health benefits package. · 401(k) · 401(k) matching · Paid vacation · Paid personal time · Technical development opportunities · Collaborative and inclusive work environment We are willing to train the right candidate. If you’re passionate about maintaining equipment and ensuring optimal operations, this role might be a great fit! \nCompany Description As one of the largest contract metal finishers on the East Coast, SPCI specializes in high-volume Powder Coating and Electrocoating. We have multiple coating systems, each designed for maximum efficiency for varying part sizes. As one of the largest contract metal finishers on the East Coast, SPCI specializes in high-volume Powder Coating and Electrocoating. We have multiple coating systems, each designed for maximum efficiency for varying part sizes.

Break away from your silo to grow your career while working on a variety of high-profile projects. Bring your cross-over background and we can mentor you on new project areas. We offer mentorship, growth and stability in an ever-changing volatile environment. Join us to do the best work of your career as an Electrical Engineer on our growing team in either our Newark, NJ or our Philadelphia, PA or NYC office. (Hybrid schedule) As an Electrical Engineer, you will be designing the infrastructure for unique projects involving EV & PV Distribution, Life Sciences, Academic, Commercial, Casinos, Airports, clean rooms and labs with integrated sustainability. Vanderweil Engineers is a top ranked national full-service engineering firm specializing in MEP/FP, and technology services. Working in multiple sectors including Mission Critical Data Centers, Science & Technology, Academic, Healthcare and Commercial buildings. For over 75 years, with a staff of 500+ located across nine offices, we are proud to be one of the leading independently owned engineering firms in the country. Expand your skillset and have a voice by working outside the box with the way we approach projects at Vanderweil. Responsibilities: • Work with Sr. Engineers and Project Managers to understand project goals and requirements, • Meetings with team members, clients, project architects, and other internal and external project disciplines., • Part of project team in designing the building infrastructure, including medium Voltage and Low Voltage electrical service, main electrical distribution equipment, building distribution equipment., • Document design calculations and design path decisions., • Model electrical distribution systems with our analysis software., • Local site surveys and CA field visits. Requirements: • 5+ years of related experience, • Understanding of NEC, IBC and IECC., • Bachelor’s degree in engineering, • FE or PE is a plus, • Revit knowledge is a plus Flexible & Hybrid Culture: Compensation range is $100,000 - $140,000 plus bonus pending years of experience, project portfolio, geographic location, professional licensure and education. We know that work/life integration is important to our employees. Our hybrid work style (two days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. We prioritize wellness with programs that support physical and behavioral health, and we’re proud to foster an equitable and inclusive workplace. Learn more about our culture at _.

Summary Empowered Buildings is a fast-growing building automation company seeking a motivated, detail-oriented engineer with 8+ years of experience in the building automation industry, a deep understanding of mechanical and control systems, and a passion for providing technical leadership, mentoring engineers, and supporting project teams. About Empowered Buildings: Empowered Buildings helps building owners and operators reduce operating costs, improve system reliability, and optimize building performance through the integration of building automation, engineering, IoT connectivity, AI-driven analytics, and intelligent software. We combine a consultative approach with scalable solutions to deliver measurable outcomes across commercial real estate, multifamily, banking, healthcare, education, and quick service restaurant portfolios. Our focus is delivering measurable business outcomes by improving operational efficiency, enabling proactive monitoring and predictive maintenance, mitigating catastrophic risk, and transforming building data into actionable insights through the intelligent integration of engineering, connected technologies, and AI-driven analytics. Role Description The Senior Building Automation Applications Engineer is a full-time, remote, or on-site role based in New York, NY. The successful candidate will provide technical leadership and engineering support for project managers, field technicians, and customers. This role is responsible for developing controls applications, programming, graphics, submittals, commissioning support, and engineering standards to ensure projects are delivered efficiently and consistently. Primary Responsibilities • Lead all controls application engineering across the company., • Review and approve system designs; develop and maintain engineering standards., • Develop graphics standards and design or oversee complex graphics and operator user interfaces., • Review all submittals and as-builts before release., • Mentor engineering staff and standardize programming, templates, and documentation., • Manage projects using project-management platforms — tracking open items, documenting activity, and coordinating field dispatch., • Improve engineering processes and quality control. Required Qualifications • Accredited engineering degree (equivalent experience will be considered), ideally with a mechanical engineering background., • 8+ years of engineering experience in the building automation / controls industry., • Deep understanding of mechanical and HVAC system operation., • Expertise in the design and submission of control systems, control-system hardware, control sequences, and installation., • Knowledge of low and line-voltage controls wiring, networking, and blueprint reading., • Circuit design, and the ability to choose the correct equipment and controllers for the application., • Controls-system troubleshooting — finding the problem in a system by reviewing programs, points, and data., • Preparation of submittals and as-builts., • Graphics design for building management systems — building clear, visually appealing, and intuitive operator interfaces, including animations and custom data-graphic objects., • Strong attention to detail and the ability to fully understand how a system works in order to display it correctly., • Mentoring skills to motivate and supervise engineering and technical staff. Preferred Qualifications • Experience with higher-level object-oriented programming and software design — some programming experience beyond controls., • Familiarity with Python, JavaScript, HTML, or a similar language., • Using AI tools to build software and workflow automations., • Proficiency in Visio; ability to create macros and custom programmed graphic objects., • Photoshop / image-editing experience and a natural eye for visually appealing design., • Remote server management., • Reliable Controls Experience, or Distech, Honeywell, Johnson Controls, or Schneider controls experience., • Niagara certification; Registered PE; CEM, other nationally recognized trade certifications., • Experience with LON, BACnet, LoRa, or Modbus protocols. Compensation & Benefits We offer a competitive salary of $140,000–$195,000 per year, plus a comprehensive benefits package and the ability to grow with our fast-growing company. • Health, dental, retirement, and vision insurance, • Flexible spending account, • Paid time off, • Professional development assistance Schedule & Location • Standard business hours, Monday to Friday., • Extended and after-hours work are required as needed to meet project demands., • Remote or In-person role based in the New York, NY. Equal Employment Opportunity Empowered Buildings provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

TRITECH is seeking a Junior Project/Cost Estimator to join our Electronic Security Division based out of our NYC Office. This entry-level position is an excellent opportunity for a recent graduate, an experienced office professional, or someone looking to begin a career in the electronic security and systems integration industry. The Junior Project/Cost Estimator will work closely with our Operations, Business Development, Design, and Estimating teams to support the development of accurate and competitive project estimates. Responsibilities include reviewing project drawings, specifications, scopes of work, and other requirements; identifying materials, labor, and project needs; and assisting with the preparation of complete cost estimates and proposals. (Perform other duties as required or assigned by company management. ) This role is ideal for someone who is detail-oriented, organized, comfortable working with technical information, and eager to develop their knowledge of electronic security systems, construction projects, and the estimating process. Preferred Qualification • Bachelor’s degree in Construction Management, Engineering, Business, Finance, Accounting, Economics, or a related field is preferred., • Prior experience or coursework in estimating, project coordination, construction, low-voltage systems, or electronic security is preferred., • Experience with electronic security systems, including access control, video surveillance, intrusion detection, or related integrated systems, is a plus. We invite you to discover the excitement, diversity, rewards and excellence of a career at TRITECH Communications. With $100 million in annual revenues and 350+ employees, TRITECH is one of the nation’s leading technology system integrators serving clients in corporate, education, healthcare and government industries. Our corporate headquarters is located in Garden City, NY and the company operates four regional operations centers in New York City, Boston, Miami and Washington DC. We are a one-source business that provides our clients with a single partner for the design, installation and maintenance of large/complex Audio Visual, Communications, PoE Lighting and Electronic Security Systems. Visit us at _ TRITECH IS AN EQUAL OPPORTUNITY EMPLOYER

Company Description FMC Engineering, P.C., founded in 1980, is a consulting engineering firm focused on mechanical, electrical, and energy conservation systems for corporate, commercial, and institutional projects. The firm delivers complete engineering services across diverse project types, including major commercial and public buildings, financial and technology facilities, educational institutions, healthcare environments, hospitality, retail, and residential developments. FMC’s principals are deeply involved in every project from initial concept through post-occupancy, ensuring hands-on leadership and client-focused service. The team of engineers, designers, and field personnel emphasizes conceptual design solutions, attention to detail, and rapid turnaround. Supported by state-of-the-art in-house CADD and computing tools, FMC is committed to meeting client schedules while designing within established budgets and cost parameters. Role Description The Senior Electrical Design Engineer is a full-time, on-site role based in Manhattan, NY. This position is responsible for leading the electrical design of building systems, including power distribution, lighting, life safety, and low-voltage systems for a range of commercial, institutional, and residential projects. Day-to-day responsibilities include developing design concepts, performing load calculations, preparing drawings and specifications, and coordinating with mechanical, architectural, and structural teams. The role involves reviewing and sealing design documents as appropriate, guiding junior engineers and designers, and ensuring compliance with applicable codes, standards, and client requirements. The Senior Electrical Design Engineer will participate in site surveys, design, construction administration, submittal reviews, and field inspections to verify installation quality and design intent. Qualifications • Strong foundation in Electrical Engineering, with proven experience in building systems and application of electricity principles in commercial, institutional, and residential projects., • Hands-on expertise in Electrical Design and Design Engineering, including load calculations, circuiting, equipment selection, and preparation of detailed construction documents., • Practical experience in Power Distribution systems, including medium- and low-voltage distribution, panelboard and switchgear layouts, grounding, and short-circuit and coordination studies., • Bachelor’s degree in Electrical Engineering or a closely related field; Professional Engineer (P.E.) license in NY or ability to obtain is strongly preferred., • Proficiency with CADD/BIM tools and related electrical design software; ability to read and coordinate multidisciplinary drawings., • Knowledge of relevant codes and standards (e.g., NEC, NFPA, local building codes) and experience designing to budget and schedule constraints., • Demonstrated ability to lead projects, mentor junior staff, and collaborate effectively with clients, architects, and other engineering disciplines., • Strong written and verbal communication skills, with the ability to document designs clearly and participate in client and coordination meetings.

About the Role Equipment Technician will support, sustain, manage equipment, and execute duties in compliance with continual business operation requirements. Responsibilities • Maintain, repair and coordinate maintenance repairs for main process equipment, auxiliary equipment and optimize PM work to achieve the highest uptime with minimal production impact., • Use schematics, hand tools, electrical gauges and common test equipment for calibration, diagnosis and repair or maintenance of equipment., • Perform preventative and predictive maintenance tasks to ensure optimal operation of equipment is maintained., • Maintain and control spare parts inventories for equipment., • Perform work and task interactions using CMMS or equivalent system., • Ensure compliance with all Safety & Security protocols including the storage, disposal of parts and chemicals., • Support facilities and interact with external service providers., • Work with low and high voltage applications up to 480 VAC., • Able to perform tasks using self-breathing air system., • Work in a cleanroom environment adhering to all safety and cleanroom protocols., • Respond to after-hour unscheduled emergencies as needed., • Mandatory availability during holidays and shut-down periods., • Other duties as assigned. Required Skills • Strong people skills, which include effective communication, teamwork/collaboration and situation resolution., • Strong mechanical and electrical aptitude., • Strong equipment troubleshooting skills., • PC knowledge and use is a requirement., • Experienced in EXCEL, WORD, and TEAMS., • Able to read schematics, plumbing, and pneumatic diagrams. Qualifications • Ability to lift, push, pull, and/ or carry minimum 50 pounds., • While performing the duties of this job, the employee must be able to stand, walk, reach, climb, stoop, kneel, crouch/crawl daily., • Specific vision abilities include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus., • Must be able to work under pressure and time deadlines during peak periods., • Experience with MOCVD systems is a plus., • Experience with high vacuum systems.

Does working in a green industry provide satisfaction and fulfillment? Would you like to be part of a dedicated, highly skilled and tightly knit team? Do you have experience in the design of efficient, cost-effective digital controls for HVAC, Access or Security? Then come work for us! The Company Since the industry began, TMBA has specialized in providing turnkey Building Management/Automation Systems and Energy Cost Reduction Measures. We provide innovative design, installation and true 24/7 service to our commercial, industrial and institutional clients. Our intensely loyal customer base is testament to TMBA’s quality product and dedicated service and is the nucleus for our steady growth. Responsibilities • Designs and configures complex building automation and HVAC control systems including integration to other low voltage systems., • Selects hardware, transducers and other components required to interface with controlled equipment., • Provides detailed information to communicate design intent to customers and subcontractors including flow diagrams, point to point wiring diagrams, riser diagrams, IO summaries, sequences of operation, equipment schedules, and product data sheets., • Completes project layout based on proposal, specifications and discussion with sales engineers and project engineers., • Coordinates field changes from the project team to create as-built drawings., • Prepares proper documentation and/or manuals for systems operation., • Participates in meetings with consulting engineers and project owners to resolve conflicts. Requirements • Bachelor’s degree in mechanical or electrical engineering or equivalent experience., • Understanding and experience in the design of HVAC Control Systems., • Ability to read & interpret mechanical and electrical drawings., • Strong verbal and written communication skills., • Design software knowledge required, AutoCAD preferred.Ability to analyze control system drawings and schedules a plus., • Schneider Electric/Andover Controls product knowledge, a plus. Work Location: Glen Cove, NY Benefits • Medical, Dental and Vision Insurance, • Life Insurance, Short-term and Long-term Disability Insurance, • Paid Time Off, Paid Holidays, • Employer Matched 401K Plan, • Profit Sharing Plan Job Type: Full-time, Exempt Annual Salary: $70,000 – $120,000, Dependent upon experience level. Job Type: Full-time Pay: $70,000.00 - $120,000.00 per year Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Vision insurance Education: Bachelor's (Required) Experience: BMS/BAS: 2 years (Preferred) Ability to Commute: Glen Cove, NY 11542 (Required) Work Location: In person

Project Executive New York City Healthcare Construction All individuals that are interested must have healthcare/medical build experience in NY and/or NJ The Project Executive will provide leadership and executive oversight for our client's Healthcare projects throughout the NYC market. This individual will be responsible for the overall success of multiple projects, including safety, pre-construction, financial performance, schedule, quality, staffing, client satisfaction, and closeout. The Project Executive will also help grow our client's Healthcare business in NYC and New Jersey by maintaining existing client relationships, developing new business, leading pursuits, and building relationships within the local healthcare community. Responsibilities: • Maintain safety standards., • Provide executive oversight of multiple healthcare projects and project teams., • Lead projects from pre-construction and estimating through construction, turnover, and final closeout., • Lead pre-construction and RFP efforts with support from the Pre-construction Department and other company resources., • Review project estimates, budgets, schedules, scopes of work, bid packages, and procurement plans., • Negotiate contract terms and conditions with clients while managing project risk., • Monitor project performance through updated schedules, cost reports, forecasts, and operational reviews., • Maintain accountability for project profitability, quality, schedule, safety, and client satisfaction., • Ensure project-specific Quality Control Plans are developed, implemented, and followed., • Assist project teams with resolving scope gaps, subcontractor issues, coordination challenges, and contractual concerns., • Identify, document, and negotiate change orders and schedule extensions when justified., • Oversee healthcare-specific planning, including infection control, occupied-facility logistics, shutdowns, phasing, interim life-safety measures, inspections, commissioning, and turnover., • Ensure proper coordination of mechanical, electrical, plumbing, medical-gas, fire-protection, and low-voltage systems., • Work closely with healthcare clients, facility teams, architects, consultants, and trade partners to minimize disruptions to active operations., • Acquire new work while maintaining and expanding relationships with existing healthcare clients., • Lead RFP responses, project interviews, client presentations, and pursuit efforts., • Maintain positive relationships with the subcontractor community and healthcare industry partners., • Ensure the timely completion of punch-list, commissioning, turnover, and closeout activities., • Provide leadership, mentorship, and professional development to Project Managers, Assistant Project Managers, Project Engineers, and other operations team members., • Partner with field leadership to ensure project teams are properly staffed and positioned for success., • Delegate responsibilities effectively to ensure projects and tasks run smoothly. Qualifications: • 10 or more years of experience with a commercial general contractor., • Significant experience leading healthcare construction projects, including hospitals, medical office buildings, clinics, outpatient facilities, or other medical environments., • Experience managing both ground-up healthcare construction and renovations within occupied facilities is strongly preferred., • Strong understanding of healthcare construction requirements, including infection control, ICRA procedures, interim life-safety measures, shutdown planning, phasing, commissioning, and regulatory inspections., • Experience coordinating complex MEP systems, medical gas, fire protection, low voltage, and healthcare equipment., • Proven ability to oversee multiple projects and project teams simultaneously., • Experience leading projects from pre-construction and estimating through construction and final closeout., • Strong estimating and pre-construction experience, including budgeting, constructability reviews, scheduling, value engineering, procurement, and subcontractor leveling., • Established business development experience, including developing client relationships, leading pursuits, and securing new work., • Strong relationships within the NYC healthcare construction market are preferred., • A four-year degree from an accredited university with a concentration in construction management, engineering, architecture, or business is strongly preferred. Additional relevant experience may be considered in lieu of a degree., • Advanced knowledge of construction drawings, specifications, contracts, schedules, cost reports, and project documentation., • Proficiency with Microsoft Office, Microsoft Project, Procore, Bluebeam, Adobe, JD Edwards, and other project-specific software platforms. Technical Experience: • Strong understanding of construction within active and occupied healthcare environments where patient safety and continuity of operations are critical., • Working knowledge of healthcare-specific systems, including medical gas, normal and emergency power, HVAC and pressure relationships, nurse call, fire alarm, security, low-voltage systems, pneumatic tube, domestic water, and critical utility infrastructure., • Experience delivering technically intensive spaces such as operating rooms, catheterization labs, imaging suites, MRI and CT rooms, pharmacies, sterile-processing departments, isolation rooms, laboratories, and critical-care environments., • Understanding of healthcare-specific requirements related to air pressure, filtration, temperature and humidity, infection prevention, life safety, and utility redundancy., • Experience coordinating the installation, commissioning, and turnover of owner-furnished medical equipment, including imaging and other specialty equipment., • Ability to understand and manage the impact of construction activities on patients, clinical staff, hospital operations, and critical infrastructure. Leadership Competencies: The successful candidate must demonstrate the ability to: • Serve as a trusted leader and healthcare construction resource throughout the project decision-making process., • Build lasting relationships with healthcare clients, facility leaders, architects, consultants, subcontractors, and vendors., • Lead client presentations, interviews, and project pursuits with confidence., • Communicate complex project information clearly and professionally., • Develop and execute a business development strategy for NYC Healthcare practice., • Take ownership of project performance and maintain accountability for results., • Coach, train, and develop project teams., • Balance multiple priorities and determine which issues require immediate attention., • Maintain a client-focused approach throughout every phase of a project., • Demonstrate integrity, • Promote collaboration among project teams, field leadership, clients, designers, and trade partners., • Exhibit professionalism by being punctual, prepared, engaged, and respectful of others.

Company Overview: MaxSolar is a leading provider of Operations & Maintenance (O&M), Asset Management and Technical Services for solar photovoltaic and battery storage systems in the commercial marketplace. As a comprehensive services provider, MaxSolar supports client needs throughout the entire project life cycle. Our programs ensure that system owners receive the maximum energy, environmental, and financial benefits from their assets. Position Overview: The Solar Technician/Electrician is required to troubleshoot and resolve solar PV and battery storage system issues, including emergency repairs/corrective maintenance, design change requirements, and equipment modifications/upgrades. Position will also be responsible for Preventative Maintenance activities to support system performance of O&M portfolio, as well as, QA/QC inspections, system commissioning and pre-con site assessments. Responsibilities: As a Solar Technician/Electrician within the Operations and Maintenance team, you will play a critical role in ensuring the safe, efficient, and reliable performance of solar energy systems. Key responsibilities include: • Performing routine maintenance, inspections, and system checks on solar equipment to ensure optimal performance., • Operating, maintaining, troubleshooting, and repairing equipment issues identified during inspections or daily operations., • Conducting electrical testing, measurements, and diagnostics to identify and resolve electrical issues., • Utilizing a basic understanding of system monitoring platforms to review and analyze performance data, identify trends, and flag potential concerns., • Preparing formal documentation of all field activities, task procedures, and maintenance actions., • Adhering to all safety protocols, company policies, and industry standards., • Providing technical guidance and support to junior technicians as needed., • Demonstrating strong attention to detail in all aspects of work., • Assisting with QA/QC activities, commissioning of new solar installations, and site assessments., • Managing preventive maintenance tasks and deliverables, including independently performing basic electrical tasks., • Conducting advanced testing and troubleshooting, including work on electrically live devices when required and permitted., • Performing lockout/tagout (LOTO) procedures in accordance with established guidelines and safely releasing systems for troubleshooting., • Executing work instructions for both electrical and mechanical repairs on on-site equipment., • Working within distribution-level systems up to 600 VAC and within PV array limits up to 1000 VDC., • Applying low-voltage test equipment, including conducting pre- and post-use inspections, safely connecting instruments, and interpreting test results. Qualifications: • Associates Degree in Engineering or equivalent Technical Certification/Training, • Licensed Electrician and NABCEP certification preferred., • Valid Driver’s license with clean record., • One (1) year minimum experience installing/maintaining commercial scale battery storage systems preferred., • Ability to work remotely and independently., • Project management/field operations management experience preferred., • Previous experience working with power electronic conversion equipment., • Experience with metering and test equipment., • Experience with centralized DAS/SCADA/EMS control systems., • Working knowledge of Commercial Power Plant Operations., • Ability to read electrical/mechanical drawings, equipment manuals and technical specifications., • Familiarity with CMMS based work order/ticketing systems and mobile reporting tools., • Working knowledge of NEC and local building codes and OSHA safety standards (OSHA 30 preferred)., • Ability to efficiently troubleshoot system failures., • Proficient with the use of the Microsoft Office Suite (Word, Excel, PowerPoint, Outlook)., • Must be willing and able to climb ladders, stairs and work on rooftops., • Ability to work in extreme weather conditions. Benefits: • Competitive salary and performance-based incentives, • Health, dental, and vision insurance, • Retirement savings plan, • Opportunities for professional development and career advancement

JOB DESCRIPTION A client of Insight Global is seeking an experienced Senior Electrical Project Manager to lead large-scale data center and healthcare facility projects from design through commissioning. This role requires strong technical expertise, client management skills, and experience overseeing complex electrical infrastructure where reliability and uptime are critical. Key Responsibilities Manage electrical projects from planning through construction and commissioning. Serve as the primary client contact. Develop project scopes, schedules, budgets, and resource plans. Lead internal teams, contractors, and consultants. Oversee medium- and low-voltage distribution, UPS, generators, emergencJOB DESCRIPTION A client of Insight Global is seeking an experienced Senior Electrical Project Manager to lead large-scale data center and healthcare facility projects from design through commissioning. This role requires strong technical expertise, client management skills, and experience overseeing complex electrical infrastructure where reliability and uptime are critical. Key Responsibilities Manage electrical projects from planning through construction and commissioning. Serve as the primary client contact. Develop project scopes, schedules, budgets, and resource plans. Lead internal teams, contractors, and consultants. Oversee medium- and low-voltage distribution, UPS, generators, emergency power, grounding, and lighting systems. Develop and execute Methods of Procedure (MOPs) and outage plans. Ensure compliance with applicable codes and standards. Manage project forecasting, change orders, invoicing, and profitability. Conduct quality reviews, risk assessments, and design reviews. Support business development and mentor junior staff. REQUIRED SKILLS AND EXPERIENCE 10+ years of electrical project management experience. Experience managing healthcare facilities, mission-critical data centers, or both. Proven success leading projects exceeding $10M in construction value. Strong knowledge of power distribution, redundancy strategies (N+1, 2N, 2N+1), and critical infrastructure. Experience creating and executing MOPs. NICE TO HAVE SKILLS AND EXPERIENCE Strong client-facing, leadership, budgeting, and forecasting skills. Experience with healthcare electrical systems and emergency power. PMP certification preferred. Experience with Accubid Change Order Pro is a plus.y power, grounding, and lighting systems. Develop and execute Methods of Procedure (MOPs) and outage plans. Ensure compliance with applicable codes and standards. Manage project forecasting, change orders, invoicing, and profitability. Conduct quality reviews, risk assessments, and design reviews. Support business development and mentor junior staff. REQUIRED SKILLS AND EXPERIENCE 10+ years of electrical project management experience. Experience managing healthcare facilities, mission-critical data centers, or both. Proven success leading projects exceeding $10M in construction value. Strong knowledge of power distribution, redundancy strategies (N+1, 2N, 2N+1), and critical infrastructure. Experience creating and executing MOPs. NICE TO HAVE SKILLS AND EXPERIENCE Strong client-facing, leadership, budgeting, and forecasting skills. Experience with healthcare electrical systems and emergency power. PMP certification preferred. Experience with Accubid Change Order Pro is a plus.

Job Description The Role We are seeking a seasoned Development Engineer with direct experience designing, engineering, and developing the technical components of C&I microgrid and distributed energy resource projects. In this role, you will translate customer resiliency, cost, and sustainability goals into engineered microgrid solutions capable of operating in parallel with the utility and independently in island mode. You will conduct site investigations, negotiate with utilities, navigate AHJ requirements and procedures, and orchestrate a complex set of constraints into a project scope that Scale can contract, construct, and operate. You will collaborate with internal cross-functional team members within project deal teams, holding yourself to the highest standard of integrity from start to finish. This is not an entry-level design position: you will own the technical strategy for each assigned project, shaping customer solutions that integrate PV, BESS, controls, and generator assets into a complete microgrid or DER system. This role will report to our Senior Manager, Project & Development Engineering, and will be a hybrid role based out of our HQ in Ridgewood, NJ, or NYC offices. Key responsibilities will include: • Support Business Development throughout opportunity qualification and proposal development, providing the technical foundation for the customer-facing solution and stepping in for direct, technical customer conversations when needed., • Perform desktop audits and onsite investigations to evaluate electrical and overall site conditions and translate findings into project-specific design constraints while also flagging discovered risks., • Develop microgrid designs, including one-line diagrams, layouts, and bills of material, progressing from initial concept through contract-ready deliverables. Use production modeling tools to optimize solar, battery storage, and generator assets for performance, resiliency, and economic return., • Support RFP responses and contract negotiations as the technical lead of the deal team., • Own utility interconnection strategy. Engage directly with utility personnel to distinguish requirements that are strictly necessary from those a utility initially assumes are required, challenging impact studies where appropriate to secure the most economical interconnection outcome., • Lead internal and third-party produced detailed engineering deliverables including interconnection, issue for bid and issue for permit drawing sets, sequence of operations and network diagrams. Oversee innovative custom switchgear designs that integrate Scale's proprietary microgrid control system to enable autonomous operation, specifying and integrating instrument transformers, metering and protective relays., • Support the technical permitting process with authorities having jurisdiction throughout the Northeast, including both discretionary and ministerial approvals., • Advise on major equipment selection for inverters, generators, and battery energy storage systems, balancing performance, cost, and schedule to inform procurement decisions., • Serve as the overall technical owner of assigned projects, flagging risks and proposing engineered solutions backed by thorough desktop and on-site diligence., • Proactively refine the internal tools and processes that keep results accurate and consistent as project volume scales. The Ideal Candidate • 4+ years of experience in the design, development, or construction of power generation, renewable energy, or utility-scale distributed energy resource projects, with a track record of measurable results., • Comfort serving as the primary technical point of contact across business development, customers, utilities, and internal engineering and product teams, with the work ethic to manage several fast-moving projects at once., • Working knowledge of low voltage and medium voltage electrical systems, typically 480V through 34.5kV, along with the switchgear, protection, and control equipment required to operate them safely., • Working knowledge of utility distribution infrastructure, including transformers, reclosers, metering, line and substation protection, and SCADA, sufficient to design sound interconnection strategies and confidently question or challenge utility study assumptions., • Understanding of onsite generation dynamics, including grid parallel and island mode operation, transition types, associated emissions considerations, and the complexities of DER control systems to meet specific operating and economic goals., • Exposure to reciprocating engines or turbines in the 200 kW to 2000 kW range is a plus., • Experience with property development or diligence platforms, such as Paces or Landgate, is a plus., • Working knowledge of and experience with PV modeling tools such as Helioscope and PVsyst., • Experience with AutoCAD, including the ability to build and maintain templates and automations that improve efficiency and consistency across the team., • Familiarity with utilities and AHJs throughout the Northeast is strongly preferred., • Confidence delivering a clear technical recommendation to internal and customer stakeholders even when no perfect option exists., • BS in Electrical Engineering, Mechanical Engineering, Civil Engineering, or a related field is required., • Professional Engineer (PE) license in power, or active progress toward one, is preferred. This is a great opportunity to have a long-term impact on a fast-paced, private equity-backed growth business. Some of the core virtues embraced by Scales’ employees include: · Do the Right Thing · Act Like an Owner · Hustle · Demand Results · Go Together · Evolve or Disappear We offer a competitive compensation package and a comprehensive benefits program including medical benefits, paid vacation and holidays, and 401K matching. About Scale Microgrids Scale is redefining resilience, with advanced microgrids that go beyond traditional backup power solutions to give businesses the power to adapt and thrive amid all of today’s growing energy challenges. As a vertically-integrated provider of turnkey advanced microgrid systems, Scale combines project design, engineering, and execution expertise with microgrid-as-a-service financing to offer our customers systems that are optimized to deliver maximum value from day one while ensuring ultra-reliable operations and fast time-to-power. Scale is backed by EQT, a firm with ~$250B in assets, bringing a depth of experience, resources, and capital that will enable Scale to continue pursuing our vision of powering the world with distributed energy. The investment enables Scale to own and operate billions of dollars in distributed generation assets. To learn more about Scale Microgrids, please visit https://www.scalemicrogrids.com. About EQT EQT is a leading purpose-driven global investment organization with EUR 246 billion in total assets under management, divided into two business segments: Private Capital and Real Assets. EQT owns portfolio companies and assets in Europe, Asia Pacific, and the Americas and supports them in achieving sustainable growth, operational excellence, and market leadership. To learn more about EQT, please visit https://eqtgroup.com. Scale strives to attract and retain a workforce that reflects the composition of our customer base and communities. We are committed to providing a work environment that provides everyone with equal access and opportunity to contribute and drive meaningful outcomes. We encourage applicants from all backgrounds to apply and will consider qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Department: Engineering Employment Type: Full-Time Reports To: Engineering Management Work Arrangement: Onsite – Monday-Friday About the Company: At Lincoln Electric Products Co. Inc., we specialize in the design, manufacture, and distribution of custom equipment tailored to meet the specific applications and requirements of our customers. Our product range includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations We pride ourselves on delivering high-quality, custom-designed solutions that address the unique needs of our clients across various industries. Position Summary Lincoln Electric Products Co., Inc. seeks a highly motivated and results-oriented Switchgear Mechanical Engineer III to join our growing team. In this role, you will play a pivotal role in developing and innovating our low-voltage switchboard products. It is a full-time, exempt position, and the candidate will report directly to the Engineering Group Leader. Working Conditions: Office Environment Job Responsibilities: Develop comprehensive mechanical designs for switchboard enclosures, busbars, and structural components, utilize advanced CAD software to create detailed 2D and 3D models. • Select appropriate materials and manufacturing processes for all components, considering cost-effectiveness, performance requirements, and industry best practices., • Employ simulation and analysis tools to optimize designs for superior performance, reliability, and thermal management., • Lead the mechanical design process to comply with relevant industry standards and regulations (ANSI, IEEE, IEC, local codes)., • Ensure that switchboard design complies with relevant design practices, electrical codes, and safety standards such as UL891, UL67, UL508A, UL50, the National Electric Code (NEC), the New York City Electric Code (NYCEC), ANSI, IEEE, IEC, the Utility Standard, and local regulations., • National Electrical Code (NEC 2008-2020), NYNEC, UL 891, UL67, UL 50, UL 508a in product development, • Stay abreast of emerging standards, innovative materials, and innovative design methodologies., • Collaborate closely with electrical engineers, design teams, and project managers to achieve project objectives seamlessly., • Verify switchboard designs meet stringent mechanical performance and safety standards (e.g., UL, NEC)., • Investigate and resolve any mechanical quality issues or non-conformities identified during production or in the field., • Generate comprehensive engineering documentation, including detailed mechanical specifications, bills of materials (BOMs), and user-friendly technical manuals., • Maintain accurate records of all design changes, revisions, and updates., • Actively monitor project budgets and identify cost-saving opportunities through design optimization without compromising quality or safety., • Provide technical support for maintenance and repair activities on deployed switchboard products., • Assist in troubleshooting and resolving mechanical issues that may arise in the field. Skills, Requirements, and Specifications • Bachelor's degree in Mechanical Engineering (Master's degree a plus)., • Experience in sheet metal and fabrication design., • Proven experience in switchboard design., • Familiarity with major brands in the industry (Schneider, ABB, Eaton), • Proficiency in advanced CAD software for mechanical design AutoCAD, Autodesk Inventor., • In-depth understanding of mechanical standards., • Excellent communication, collaboration, and teamwork skills., • Ability to thrive in a fast-paced, results-oriented environment., • Meticulous attention to detail and a commitment to quality. Education: Bachelor's or Master's Mechanical Engineering Degree

As a Service Technician, you will be responsible for diagnosing, maintaining and repairing motors vehicles. You will demonstrate your passion for sustainable transportation and creatively solve problems in a fast-paced environment. Qualifications: • 2-5 years of experience as an automotive service technician, including previous experience with EV/HEV diagnosis and repair, • Knowledge of High Voltage systems, Low Voltage systems, and Electric Vehicle powertrains Customer facing experience exhibiting excellent written and verbal communication skills, • Ability to use applications such as Microsoft Office as well as learn proprietary DMS software, • EPA 609 Certification (or willing to get), • Willingness to complete provided CPR training post hire, • Valid driver’s license with no suspensions within the past year. Pay: $33-$43 (depending on years of experience) FULL TIME

An established electrical company is seeking an experienced Electrical Project Manager to join our team at our Long Island City office. Responsibilities: • Manage all phases of electrical construction projects from pre-construction through completion, • Perform pre-construction planning, including submittals, RFIs, and shop drawings, • Prepare and issue purchase orders and coordinate with vendors, • Attend site meetings and maintain clear communication with clients, contractors, and internal teams, • Oversee project scheduling, manpower allocation, and material management, • Manage change orders and ensure projects stay on budget and on schedule Qualifications: • Minimum of 5 years of experience as a Project Manager in the electrical field, • Strong knowledge of low-voltage (LV) systems and fire alarm systems, • Proficient in computer applications relevant to project management, • Strong knowledge of the National Electrical Code (NEC) and NYC electrical codes, • Comprehensive understanding of electrical systems for both residential and commercial turnkey projects Please provide a list of completed projects for the references. Job Type: Full-time

Our client is looking for an experienced AV Support Technician Contractor to join their Workplace Technology team. In this role, you will be the front line for all things conference room AV — keeping every meeting space running smoothly, day in and day out, for a fast-paced, high-growth environment. You'll own daily AV sweeps, troubleshoot everything from a dropped Google Meet call to a misbehaving room scheduler, and be the person we call on to stand up a new conference room from the ground up. You'll also play an active role in supporting company events, running the AV for productions out of our All-Hands booth and training room event space alongside our broadcast and events teams. You are someone who asks questions, is confident in not knowing everything, and would rather collaborate with others than go it alone. You are crisp and detail-oriented, but able to work outside the boundaries when necessary. On top of your proven track record, you have a genuine passion for AV and IT technology, and, like us, you value hard work and fun in equal measure. Key Responsibilities Conference Room AV Support & Sweeps • Perform daily AV sweeps of all conference rooms to proactively catch and resolve issues before meetings start., • Support and assist employees using conference room AV systems, both on-site and remote, including Google Meet, projectors, displays, and audio/video conferencing equipment., • Troubleshoot and resolve Google Meet hardware and software issues, including Google Meet room kits, cameras, and in-room controllers., • Support and maintain the Logitech Rally line of products (cameras, speakers, mics, and Rally Bar/Rally Bar Mini) across conference rooms., • Support and troubleshoot Neat Bar Pro systems, including connectivity, audio/video quality, and firmware issues., • Configure, monitor, and troubleshoot Logitech scheduling displays/room schedulers, ensuring rooms show accurate availability and booking status., • Know and work with your points of escalation to continuously improve the end-user experience., • Train employees on the proper use of conference room AV equipment., • Respond to support escalations from the IT Helpdesk, both in person and via our ticketing system, and triage hardware stacks as needed., • Manage inventory for AV and IT hardware and software, including tracking, ordering, and stocking of spares and consumables. Conference Room Design, Install & Troubleshooting • Provide technical input in the selection and management of AV integrators, technology vendors, and managed-service partners., • Design, install and configure new conference rooms from the ground up, including mounting displays and cameras, running and terminating cabling, and installing and provisioning room hardware., • Configure, calibrate, and maintain conference room audio systems (DSPs, mixers, microphones, speakers) to ensure clear, consistent audio quality., • Diagnose and resolve complex, end-to-end conference room issues spanning hardware, software, network, and scheduling systems., • Document room configurations, signal flow diagrams, and equipment inventories for all supported spaces., • Assist with cabling, rack builds, and low-voltage wiring for new or renovated conference rooms as needed. Event AV Support & Production • Operate and run live AV production for internal company events out of the All-Hands event booth, serving as day-to-day hands-on technical support for All-Hands meetings, town halls, and other streamed events., • Operate Q-SYS systems for event audio processing, DSP configuration, and signal routing during live productions., • Set up, configure, and operate Epiphan Pearl 2 encoders for recording and streaming All-Hands and training room events., • Configure and troubleshoot Google Meet as the hybrid/remote contribution and streaming platform for live events., • Operate Blackmagic switchers for live camera switching and program video during events., • Operate mixing consoles to provide core audio support — levels, mic mixes, and program sound — for live events and presentations., • Extend event AV support beyond the All-Hands booth by setting up, running, and tearing down AV for events held in the training room and other secondary event spaces., • Perform pre-event technical checks (audio, video switching, camera framing, encoder/streaming status, and Google Meet connectivity) and conduct basic run-throughs ahead of live events., • Monitor the live event signal chain during productions and troubleshoot issues in real time, escalating to the Broadcast Lead or events team for complex or high-stakes production issues., • Coordinate with the Events team and Broadcast Lead on run-of-show technical requirements, equipment needs, and staffing for upcoming events., • Perform routine maintenance, firmware updates, and basic troubleshooting on event AV equipment, including Q-SYS processors, Epiphan encoders, Blackmagic switchers, mixing consoles, cameras, and microphones., • Assist with cabling, rack organization, and configuration changes for the All-Hands booth and training room event AV systems., • Help maintain documentation for event AV setups, signal flow, and standard operating procedures for recurring event types. Documentation, Systems & Continuous Improvement • Develop and maintain knowledge base articles and runbooks in Confluence for conference room and event AV systems, troubleshooting steps, and standard operating procedures., • Monitor conference room AV system health using remote monitoring and management tools, applying firmware and software updates as needed., • Coordinate with outside vendors and contractors for AV equipment procurement, repair, installation, and preventive maintenance., • Stay current with emerging conference room AV, event production, and unified communications (UC) technology trends and recommend improvements to existing systems. Requirements • 5+ years of experience in IT/AV support roles, with a focus on conference room and meeting-space AV support., • Hands-on experience with the Logitech Rally line of products (cameras, speakers, mics, Rally Bar/Rally Bar Mini)., • Hands-on experience with Neat Bar Pro or similar all-in-one video bar systems., • Experience configuring and troubleshooting Logitech scheduling displays/room schedulers., • Strong, hands-on experience troubleshooting Google Meet hardware and software in a conference room and live event setting., • Demonstrated ability to install and troubleshoot a conference room from the ground up — including mounting, cabling, configuration, and testing., • Hands-on experience operating live event AV equipment, including video switchers (e.g., Blackmagic), audio mixing consoles, and streaming/recording encoders (e.g., Epiphan Pearl 2)., • Working experience with Q-SYS or similar audio DSP/control platforms in a live event or production environment., • Comfort running the technical side of a live event (All-Hands, town hall, or similar) with moderate supervision, not just assisting., • A positive, service-oriented attitude with strong customer service instincts., • Solid critical thinking and problem-solving skills, with the ability to stay calm and effective when troubleshooting live, in-use meeting rooms and live events., • Ability to lift and handle heavy equipment (50+ lbs) as needed for installs, room builds, and event setup/teardown., • Basic to intermediate networking skills, including an understanding of servers, switches, WiFi, and AV-over-IP fundamentals., • Experience with administration of Apple computer products using enterprise management tools., • Knowledge and hands-on experience managing Windows laptops and desktops., • Experience using and managing ticket-based enterprise workflow/ticketing systems., • Familiarity with common AV signal types and connectors (HDMI, SDI, Dante, USB-C, AVoIP)., • Strong verbal and written communication skills, comfortable presenting information to end-users of all technical levels. Preferred Qualifications • Preferred but not required AVIXA CTS (Certified Technology Specialist) certification, or actively working toward one., • Experience with additional conferencing hardware ecosystems (Poly, Yealink, Crestron, or similar)., • Experience with control system programming/configuration (Crestron, Extron, or Q-SYS)., • Experience with audio DSP platforms (Q-SYS, Biamp, or Extron)., • Prior experience as an event or broadcast AV technician, running audio/video for live corporate events, webinars, or streamed productions., • Ability to read and interpret AV signal flow diagrams and schematics., • Bachelor's degree in a related field, or equivalent combination of education, training, and hands-on experience. Compensation: $35 - $38 per hour ID: 4786

Overview At Harrison Green, we create landscapes that enrich daily life, foster connection, and bring enduring beauty to city rooftops, townhouses, country estates, hospitality environments, and boutique commercial projects. Our work spans city rooftops, townhouses, country estates, hospitality environments, and boutique commercial projects, each approached with the same commitment to thoughtful design, meticulous execution, and long-term stewardship. Operating out of our custom-retrofitted, light-filled commercial studio in Brooklyn, we have built a growing enterprise that has spent over a decade transforming the city's skyline. We are seeking an experienced, hands-on Irrigation & Lighting Specialist to lead the planning, installation, and ongoing management of irrigation and low-voltage lighting systems across our diverse portfolio. This role is ideal for a field-oriented expert who loves working side-by-side with general crew members, coaching team members on technical execution, supervising active sites, and rolling up their sleeves to directly install, troubleshoot, and maintain sophisticated systems for high-end urban gardens. Key Responsibilities Field Leadership & Hands On Execution • Work hands-on in the field alongside general crew members, consulting on technical hurdles, supervising installations, and performing complex troubleshooting., • Direct and execute the physical installation of custom drip/smart irrigation systems and low-voltage architectural landscape lighting., • Set daily work plans, enforce rigorous quality standards, and ensure all installations comply with NYC codes, water regulations, and site constraints. Pre-Construction & Project Coordination • Review landscape irrigation and lighting plans for constructability, efficiency, and long-term performance., • Coordinate seamlessly with our Design, Construction, and Maintenance teams, as well as general contractors and other trades on active sites., • Procure materials, track equipment, and maintain accurate documentation, as-builts, and maintenance records. Service & Maintenance Management • Oversee and execute seasonal system activations (spring start-ups) and winterizations., • Diagnose and repair complex electrical and hydraulic system failures across our private residential portfolio. Who You Are You are a seasoned trade professional and hands-on leader who takes immense pride in technical mastery and craft execution. You are equally comfortable consulting on complex drawings in the studio, coaching crew members in the field, and managing the operational transition of bringing subcontractor work in-house. You view landscape systems through the lens of long-term reliability, efficiency, and seamless integration with high-end design. What You Bring • Experience: 5+ years of hands-on experience in low-voltage lighting and irrigation installation, troubleshooting, and department management—specifically within complex urban environments., • Leadership Style: Proven track record of mentoring crew members, managing field teams, and transitioning work successfully from subcontractors to in-house operations., • Technical Mastery: Deep comprehensive knowledge of irrigation controllers, smart water-management tech, hydraulic calculations, and low-voltage lighting transformers, fixtures, and wiring., • Drawings & Specs: Strong ability to read, interpret, and implement detailed landscape and electrical construction drawings., • Physical Requirements: Ability to work outdoors in varying weather conditions, navigate active construction sites safely, and perform physical field work including lifting up to 50 lbs.

Hiring a Low Voltage Design Engineer for a NYC MEP Design firm who is bringing IT/AV services in-house for the first time. This role establishes and builds out Low Voltage Design as a formal practice area within the firm. You'll design Structured Cabling + IT Infrastructure, Telecoms, Fire Alarm + Security Systems, AV, BMS and Lighting Controls. You will manage projects independently from concept through construction administration, represent the firm to clients, prospective clients, and industry partners as part of BD efforts. Hybrid role in Midtown.

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Health insurance, • Paid time off We are seeking an experienced Senior Home Technology Installer & Project Manager to lead residential audio, video, networking, smart home, and CCTV projects from pre-wire through final commissioning. This role is ideal for a highly skilled technician who is ready to take ownership of projects, lead field teams, interface with clients and builders, and ensure exceptional execution and customer satisfaction. This is a hands-on leadership role — you will both manage projects and actively participate in installation and system configuration. Key Responsibilities Project Management • Lead residential AV, smart home, networking, and surveillance projects from kickoff to completion, • Review proposals, plans, and scope of work to ensure accurate execution, • Coordinate with homeowners, builders, electricians, and other trades, • Manage job timelines, labor allocation, and material procurement, • Conduct site walks and progress meetings, • Ensure projects are delivered on time, on budget, and to company standards Installation & Technical Execution • Perform and oversee pre-wiring, trim-out, and final installation, • Install and configure:, • Distributed audio systems (e.g., Sonos, Control4, etc.), • Home theaters and media rooms, • TV mounting and structured wiring, • Networking equipment (routers, switches, access points), • CCTV systems (IP cameras, NVRs, remote access setup), • Smart home systems (lighting control, automation, water monitoring, etc.), • Terminate, label, and test low-voltage wiring, • Rack build-out and clean cable management, • System programming and client handoff Leadership & Client Experience • Supervise and mentor junior technicians, • Maintain high installation standards and jobsite cleanliness, • Communicate clearly and professionally with clients, • Conduct system walkthroughs and training at project completion, • Support service department with escalated troubleshooting when needed Qualifications • 5+ years experience in residential AV, low-voltage, or smart home installation, • Proven experience managing projects and leading teams, • Strong knowledge of:, • Home networking fundamentals (IP addressing, VLANs, WiFi optimization), • Distributed audio/video systems, • CCTV systems and remote access configuration, • Structured wiring best practices, • Ability to read blueprints and wiring schematics, • Clean, organized rack-building and cable management skills, • Strong troubleshooting abilities, • Valid driver’s license and clean driving record Preferred Certifications (not required but a plus): • Control4, Savant, or Crestron certification, • Networking certifications (Ubiquiti, Araknis, Cisco, etc.) What We’re Looking For • A leader who takes ownership of projects, • Detail-oriented and quality-driven, • Calm under pressure and solutions-focused, • Professional and client-friendly, • Passionate about technology and staying current with industry trends Compensation & Benefits • Competitive salary based on experience, • Performance bonuses, • Company vehicle or vehicle allowance (if applicable), • Paid time off, • Ongoing training and certification opportunities, • Career growth into senior operations or technical leadership roles Why Join Us? We are not just installers — we are long-term technology partners for our clients. This role offers the opportunity to lead high-end residential projects, work with cutting-edge technology, and be part of a company that values quality, service, and long-term relationships. If you’re ready to step into a leadership role and build exceptional smart home experiences, we’d love to hear from you.

Job Description PLEASE DO NOT APPLY UNLESS YOU HAVE THE EXPERIENCE THAT IS REQUIRED BELOW! NEED TO LIVE WITHIN 50 MILE RADIUS (FAIRFIELD, NJ) WWW.HSLSS.COM JOB POSTING Full-Time 2 – 5 Years’ Experience. Security CCTV, Burglar & Fire Alarm Installation Technician - Fairfield, NJ Homeland Security is looking for "super stars" to join our family!! Homeland Security & Life Safety Systems, LLC is growing rapidly and looking for experienced technician to install in the Electronic Security industry. Commercial Burglar Alarm, Fire Alarm, IP CCTV, Intercom and Access Control Systems. Candidate must be proficient at installing and using a digital multi-meter, network tester, IP camera addressing, hand tools and power tools, and running wires and network cabling. Great opportunity, pay and benefits. Here are some of the manufactures you must be familiar with: • Security - DMP, Bosch, Honeywell, • IP CCTV – Hanwha, Axis, Verint, Exacq, Avigilon, • Access Control – Lenel, Software House, Brivo, Amag, WINPAK, • Fire - Silent Knight, Firelite, Bosch, Notifire, Silent Knight TASKS/RESPONSIBILITIES · High School Diploma or Tech School Certification • · Continually learn new products, upgrades and software programs related to low voltage systems, • · Installing low voltage security systems in a new and old construction commercial, banking and retail environment, • · Read and understand floor plans, • · Terminating and installing security, CCTV and Access devises, • · Testing /troubleshooting system issues, • · Pulling Fiber and Cat6, • · Responsible for maintaining company vehicle’s inventory SKILLS/REQUIREMENTS • · Valid New Jersey driver’s license, • · Minimum of 1-5 years of experience as a field technician trouble shooting CCTV and alarm systems, • · Terminating RJ-45 Cat6/Cat5 modules, • · Ability to lift 50 lbs., • · Ability to work on heights (scissor, boom lifts and ladders), • · Must be able to climb, crawl and raise objects overhead This is a FULL-TIME position: • Competitive pay, • Holidays, • Vacation, • Health Care insurance available, • Company provides power tools, E-ZPass, vehicle and company credit card., • 401K Plan Available Thank you, Homeland Security & Life Safety Systems, LLC \nCompany Description Homeland Security & Life Safety System is company that has been in business for 25 years and growing! Come join a company that doesn't treat you like a number but a family member and where there is no I in TEAM! Homeland Security & Life Safety System is company that has been in business for 25 years and growing! Come join a company that doesn't treat you like a number but a family member and where there is no I in TEAM!

A leading luxury electric vehicle manufacturer is seeking an experienced Service Technician to diagnose, maintain, and repair advanced electric vehicles. This position is ideal for an automotive technician with hands-on experience in EV/HEV systems, electrical diagnostics, mechanical repair, and customer service. The Service Technician will work in a fast-paced environment supporting both in-shop and mobile service operations. The company also provides training and reimbursement for required ASE certifications. Responsibilities Diagnose and repair basic and complex mechanical and electrical issues Maintain strong knowledge of high-voltage, low-voltage, and electric vehicle systems Perform maintenance and repair work on electric vehicle powertrains and related components Accurately document vehicle concerns, causes, and completed repairs Use service software and diagnostic tools to document customer and vehicle interactions Communicate effectively with service advisors, managers, technicians, and customers Share technical knowledge and provide guidance to other team members when needed Follow established safety, maintenance, and repair procedures Deliver a high-quality customer experience with strong attention to detail Support mobile service operations as needed Required Qualifications 2–5 years of experience as an automotive service technician Previous experience diagnosing and repairing electric or hybrid vehicles Knowledge of high-voltage systems, low-voltage systems, and electric vehicle powertrains Strong electrical and mechanical diagnostic abilities Customer-facing experience with strong written and verbal communication skills Ability to use Microsoft Office and learn proprietary dealership management software EPA Section 609 certification Willingness to complete company-provided CPR training after hire Valid driver’s license with no suspensions within the previous year Ability to obtain required ASE certifications within 6–8 months of hire Preferred Qualifications ASE certifications such as A4, A5, A6, A7, A8, L3, or L4 Experience working in a luxury automotive repair or dealership environment Experience with advanced driver-assistance systems Previous mobile service experience

Operations Manager A leading provider of fire, life safety, security, and integrated technology solutions is seeking an experienced Operations Manager to support its fire and life safety business. This role is responsible for leading day-to-day operations, financial performance, customer satisfaction, safety, workforce planning, and service delivery. The Operations Manager will oversee complex field operations, support project and service teams, manage budgets and forecasting, and ensure customers receive a consistent, high-quality experience. The ideal candidate brings strong experience in fire alarm, low-voltage, integrated security, or related systems, along with demonstrated success leading teams and managing operational and financial performance. Primary Responsibilities Operations • Oversee the effective administration of job-site and service operations, including estimating, pricing, quoting, order processing, timecard review, billing, and escalated collection matters., • Manage backlog and assign work to Project Managers and field teams based on business needs and available resources., • Monitor job expenses and ensure costs are appropriately allocated., • Monitor labor and material performance against budget and address variances as needed., • Ensure returns, repairs, billing, and related operational activities are completed accurately and on time., • Drive timely client billing in accordance with contract terms. Customer Service and Client Satisfaction • Develop and maintain strong customer relationships and ensure a high level of client satisfaction., • Maintain regular communication with customers to understand changing needs, business priorities, and opportunities for additional support., • Monitor customer feedback and key performance indicators to ensure contractual expectations are met or exceeded., • Use customer feedback and performance data to identify and implement service improvements., • Resolve escalated customer concerns and collaborate with Sales, Finance, and other internal teams to improve service delivery and customer satisfaction. Budgeting, Forecasting and Analysis • Forecast department staffing, revenue, expenses, and resource requirements., • Develop and manage annual operating budgets., • Analyze actual performance against budget and make adjustments as needed., • Review prospective service opportunities and support accurate estimating and pricing., • Review job cost information for accuracy and profitability., • Provide senior leadership with reporting related to revenue forecasts, operational trends, staffing, performance, and opportunities for improvement. Safety • Lead and support the overall safety program for the operation., • Ensure required safety training, toolbox talks, certifications, and PPE requirements are completed and maintained., • Oversee investigations and documentation related to safety incidents., • Partner with enterprise safety resources on implementation and improvement of safety programs, policies, and processes., • Maintain a strong culture of safety and accountability across field operations. Strategy • Develop and implement operational strategies that improve service delivery, field productivity, customer experience, and cost efficiency., • Improve coordination of technicians, field engineers, project teams, and service resources., • Oversee the transition of completed projects into ongoing service operations., • Identify opportunities to improve processes, productivity, customer satisfaction, and financial performance. People Leadership • Lead, coach, and develop operations and field personnel., • Ensure employees maintain appropriate technical competency, training, and certifications., • Monitor staffing levels and workforce needs to support business growth and customer demand., • Partner with Human Resources and senior leadership on employee development, performance management, succession planning, and career growth., • Promote a professional, accountable, and team-oriented work environment. Basic Qualifications • 7+ years of experience in fire alarm, low-voltage, integrated security, life safety, or related systems, • 3-5+ years of experience in operations, project management, service leadership, or regional leadership, • Experience leading and developing teams, • Experience managing customer and client relationships, • Experience with budgeting, forecasting, and financial performance management, • Ability to read and interpret financial statements and job-cost information, • Strong problem-solving and decision-making skills, • Experience driving operational improvements and business results, • Experience adapting to changing customer and business needs, • Experience with change management, • Experience operating within a risk management and compliance environment, • Strong organizational and time management skills, • Ability to manage multiple priorities and work effectively under deadlines, • Proficiency with Microsoft Office applications, including Excel, Word, PowerPoint, and Outlook, • Ability to travel up to 40% Preferred Qualifications • Bachelor’s degree in business management, project management, personnel management, or a related field, • NICET certification, • State qualifier license or other relevant industry certification, • Experience managing fire or life safety operations Compensation The salary range for this position is $100,000 to $120,000 annually. The starting salary will be determined based on qualifications, experience, education, skills, certifications, and internal equity. A comprehensive benefits package is also offered. Additional Information This job description is intended to describe the general nature and level of work performed in this position. It is not intended to be an exhaustive list of all duties, responsibilities, or qualifications. Additional duties may be assigned as business needs require. This employer is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, or any other characteristic protected by applicable law.