Trabajos no experience computer en Edison, New JerseyCrear alertas

Job Description JOB DESCRIPTION: • Diagnose unit repair needs and perform designated repairs on company and customer owned commercial generators/engines as directed., • Perform necessary troubleshooting and notify Service Manager of outstanding issues., • Expected to complete tasks with no/limited supervision., • Demonstrates extremely well developed technical and troubleshooting skills with strong analytical problem-solving skills in their work unit., • Demonstrates the need for continuous self-development and seeks every opportunity to improve their personal, technical, and interpersonal skills., • Verified findings, review readings of gauges and procedures and compare to manufactured specs., • Install, replace, rebuild, or repair the parts and/or equipment in a timely manner and according to specifications, • Consistently follows all Foley safety policies and procedures to include all Personal Protective Equipment being worn at all times, as well as contamination control guidelines., • Willing to respond to after-hour emergency calls as directed by supervisor., • Test the part or equipment and perform quality checks after work is complete., • At the end of shift, secure all equipment and machinery and complete all required paperwork., • Basic computer skills and good interpersonal and communications skills., • The candidate must have a clean driving record and current driver’s license. RECOMMENDED QUALIFICATIONS: • Minimum 3-5 years experience with Cat/Non-Cat power gen units., • Must be able to multitask., • Assist parts department in researching and ordering needed parts., • Strong Computer skills preferred, knowledge of SisWeb and ET. Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.

Job DescriptionBenefits: • Employee discounts, • Health insurance, • Paid time off, • 401(k) matching, • Company car, • Dental insurance, • Flexible schedule, • Free uniforms, • Vision insurance, • Training & development Employer Provided Wages: $25-$38+ Per Hour (Based on experience and Qualifications ABOUT US: AK AIRE LLC Home Service (AKAHS) is located In Middlesex County as is a New Jersey based residential contractor specializing in service, installations, and maintenance in the trades of Plumbing, Heating, Air conditioning, Electrical and Generator systems. AKAHS, has been providing New Jersey Homeowners quality services since 2007, we have been in business for 19 years with 85% repeat business. We are growing our HVAC Division to have an immediate opening for service technicians. We are looking for highly motivated and hardworking individuals to join the company. Our Service Areas include, but not limited to, Middlesex County, Monmouth County, and Ocean County. We focus on the residential marketplace with light commercial. Become part of a team dedicated to safe, quality work. Job Responsibilities : • Perform on-site preventative maintenance, diagnostics, repairs and troubleshooting for customer’s Hot Air Furnace, Air Handlers, Condenser, Heat Pump, etc., • Ability to deal effectively with customer service and technical problems by using experience and personal influence to provide resolution with supporting documentation and explanations of service performed or parts used., • Travel to job sites in service area, and work with dispatch to ensure schedule is maintained and delays are properly communicated to customers, • Be available to work nights or weekends, on a rotating basis, to service emergency needs or our customers, • Maintain proper stock, parts, tools and safety equipment in the vehicle. Document all installed equipment upon arrival; make, model, serial number , type of fuel, necessary test measurements, and pictures as needed., • Diagnose diverse service issues, obtained any replacement parts, calibrate systems to manufacturer's recommendations., • Complete and submit work orders, • Other duties and responsibilities as they are assigned Requirements:, • Minimum 3-5 year experience in maintenance, troubleshooting and correcting diverse HVAC issues, • Excellent verbal & written communication skills., • Ability to work independently in a timely manner, making sure the job is done correctly the first time., • Strong organization skills with close attention to detail., • Ability to multi-task & Prioritize., • Establish & maintain good working relationship with coworker and management., • Team player with a positive attitude. Other Requirements: • well groomed, neat appearance, • valid driver’s license and clean driving record, • valid social security number, • Some computer skills, tablet, or phone, • Lift up to 50 pounds,; be able to push, pull, carry or maneuver heavier items (with additional manpower or appropriate devices)/ carry ladders; work from heights, work in small crawl spaces, • Observe all company procedures and safety rules Work as part of our team to ensure customer satisfaction Work Remotely: NO Job Type: Full-Time Pay: Starting $25-38 per hour based on qualifications Benefits: • 401(k), • Dental Insurance, • Vision Insurance, • Health Insurance, • Paid Time off, • Tuition reimbursement, • Paid Training, • Paid Holidays, • Company Truck Flexible Schedule: • Monday to Saturday, • On Call (Limited), • OvertimeSupplement Pay types:, • Bonus Pay, • Commission Pay Experience:, • HVAC Service: 3-5 Years, 5 years PreferredLicense/Certifications:, • EPA CertificationWork Location: On the Road Office Location: 1583 Livingston Ave, North Brunswick NJ 08902. Employer Provided Wages: This employer has provided their official estimate of the base salary they intend to pay for this job. Note that this is a range and an estimate, and this number is not guaranteed. An employer’s actual offer would depend on a candidate’s skills and level of experience. Employers may offer this job to a candidate at a salary outside of this range at their discretions.

\n MedPro Healthcare Allied Staffing is seeking a travel Nuclear Medicine Technologist for a travel job in New Brunswick, New Jersey. Job Description & Requirements\n \n • Specialty: Nuclear Medicine Technologist\n, • Discipline: Allied Health Professional\n, • Start Date: 12/21/2026\n, • Duration: 13 weeks\n, • 40 hours per week\n, • Shift: 10 hours, days\n, • Employment Type: Travel\n \n \n MedPro Healthcare Staffing, a Joint Commission-certified staffing agency, is seeking a quality Nuclear Medicine Technologist for a contract with one of our top healthcare clients. \n \n Requirements \n \n • Graduate of an AMA approved school for Nuclear Medicine Technology\n, • Eighteen months of Nuclear Medicine Technologist experience preferred, ideally in a critical care setting.\n, • Registry by the American Registry of Radiologic Technology.\n \n Benefits \n \n • Weekly pay and direct deposit\n, • Full coverage of all credentialing fees\n, • Private housing or housing allowance\n, • Group Health insurance for you and your family\n, • Company-paid life and disability insurance\n, • Travel reimbursement\n, • 401(k) matching\n, • Unlimited Referral Bonuses up to $1,000\n Duties Responsibilities\n The primary responsibility of the Nuclear Medicine Technologist is to prepare and administer radiopharmaceuticals as well as other medications to patients. \n \n \n • Administer radiopharmaceuticals and medications for patient imaging and therapeutic procedures.\n, • Process data and enhancing digital images using advanced computer technology.\n, • Provide images, data analysis and patient information for diagnostic interpretation or therapeutic procedures.\n, • Evaluate images to determine the technical quality and calibration of instrumentation.\n, • Assure compliance with federal, state, and local technical and professional regulations and accepted practiced guidelines.\n, • Delivers quality, cost effective patient care in a professional manner.\n, • Works effectively to maintain an environment of excellence, which is patient focused, providing timely, compassionate, quality patient care.\n, • Promotes and maintains a safe work environment for both staff and customers, incorporating national patient safety initiatives.\n \n About Agency \n MedPro Healthcare Staffing is a Joint Commission certified provider of contract staffing services. Since 1983, we have placed nursing and allied travelers in top healthcare facilities nationwide. Join us today for your very own MedPro Experience®. \n If qualified and interested, please call for immediate consideration. \n \n MedPro Staffing is an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, national origin, age, sex, disability, marital status or veteran status. \n \n Key Words: Nuc Med Tech, Nuclear Med Tech, Nuclear Medicine Technologist, CNMT \n \n *Weekly payment estimates are intended for informational purposes only and include a gross estimate of hourly wages and reimbursements for meal, incidental, and housing expenses. Your recruiter will confirm your eligibility and provide additional details. \n \n \n MedPro Job ID #a0Fcx00000gjMdhEAE. Pay package is based on 10 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Nuclear Med Technologist Imaging: Nuclear Med Tech. About MedPro Healthcare Allied Staffing\n \n At MedPro Healthcare Staffing, we believe no one cares more for caregivers than we do. Our mission is simple: you focus on your patients, and we’ll take care of the rest. \n \n As a Joint Commission-certified leader in temporary and contract healthcare staffing since 1983, MedPro has proudly connected nursing and allied travelers with top healthcare facilities across the nation. With thousands of job opportunities available nationwide, we make it easy to find assignments that align with your goals and lifestyle. \n \n Our on-staff clinical support team—alongside a compassionate group of experienced recruiters—provides hands-on guidance every step of the way. From Day 1 medical benefits and a 401(k) plan to personalized career support, we’re committed to ensuring every professional we serve feels valued, cared for, and empowered to succeed. \n \n Guided by a CEO who is a Registered Nurse, MedPro is built on a foundation of clinical insight and genuine compassion for the caregiving community. Through The MedPro Experience®, we deliver travel assignments that are rewarding, memorable, and designed to help you DREAM big, EXPLORE often, and ACHIEVE greatness. \n \n \n Benefits \n \n \n • Day 1 medical, dental, and vision benefits for you and your family\n, • Weekly pay and direct deposit\n, • Unlimited Referral Bonuses starting at $500\n, • On Staff Clinical Support Team\n, • Access to nationwide travel assignments\n, • MPX+ Mobile app -24/7 real-time access to jobs, credentials, assignment details, and more\n, • Full coverage of all credentialing fees\n, • Private housing or housing allowance\n, • Tax Free Per Diems, Housing Stipends and Travel Reimbursements\n, • Company-paid life and disability insurance\n, • Travel reimbursement\n, • 401(k) matching\n \n Benefits\n \n, • Weekly pay\n, • Employee assistance programs\n, • Referral bonus\n \n

\n MedPro Healthcare Allied Staffing is seeking a travel Nuclear Medicine Technologist for a travel job in New Brunswick, New Jersey. Job Description & Requirements\n \n • Specialty: Nuclear Medicine Technologist\n, • Discipline: Allied Health Professional\n, • Start Date: 11/09/2026\n, • Duration: 13 weeks\n, • 40 hours per week\n, • Shift: 10 hours, days\n, • Employment Type: Travel\n \n \n MedPro Healthcare Staffing, a Joint Commission-certified staffing agency, is seeking a quality Nuclear Medicine Technologist for a contract with one of our top healthcare clients. \n \n Requirements \n \n • Graduate of an AMA approved school for Nuclear Medicine Technology\n, • Eighteen months of Nuclear Medicine Technologist experience preferred, ideally in a critical care setting.\n, • Registry by the American Registry of Radiologic Technology.\n \n Benefits \n \n • Weekly pay and direct deposit\n, • Full coverage of all credentialing fees\n, • Private housing or housing allowance\n, • Group Health insurance for you and your family\n, • Company-paid life and disability insurance\n, • Travel reimbursement\n, • 401(k) matching\n, • Unlimited Referral Bonuses up to $1,000\n Duties Responsibilities\n The primary responsibility of the Nuclear Medicine Technologist is to prepare and administer radiopharmaceuticals as well as other medications to patients. \n \n \n • Administer radiopharmaceuticals and medications for patient imaging and therapeutic procedures.\n, • Process data and enhancing digital images using advanced computer technology.\n, • Provide images, data analysis and patient information for diagnostic interpretation or therapeutic procedures.\n, • Evaluate images to determine the technical quality and calibration of instrumentation.\n, • Assure compliance with federal, state, and local technical and professional regulations and accepted practiced guidelines.\n, • Delivers quality, cost effective patient care in a professional manner.\n, • Works effectively to maintain an environment of excellence, which is patient focused, providing timely, compassionate, quality patient care.\n, • Promotes and maintains a safe work environment for both staff and customers, incorporating national patient safety initiatives.\n \n About Agency \n MedPro Healthcare Staffing is a Joint Commission certified provider of contract staffing services. Since 1983, we have placed nursing and allied travelers in top healthcare facilities nationwide. Join us today for your very own MedPro Experience®. \n If qualified and interested, please call for immediate consideration. \n \n MedPro Staffing is an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, national origin, age, sex, disability, marital status or veteran status. \n \n Key Words: Nuc Med Tech, Nuclear Med Tech, Nuclear Medicine Technologist, CNMT \n \n *Weekly payment estimates are intended for informational purposes only and include a gross estimate of hourly wages and reimbursements for meal, incidental, and housing expenses. Your recruiter will confirm your eligibility and provide additional details. \n \n \n MedPro Job ID #a0Fcx00000asK53EAE. Pay package is based on 10 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Nuclear Med Technologist Imaging: Nuclear Med Tech. About MedPro Healthcare Allied Staffing\n \n At MedPro Healthcare Staffing, we believe no one cares more for caregivers than we do. Our mission is simple: you focus on your patients, and we’ll take care of the rest. \n \n As a Joint Commission-certified leader in temporary and contract healthcare staffing since 1983, MedPro has proudly connected nursing and allied travelers with top healthcare facilities across the nation. With thousands of job opportunities available nationwide, we make it easy to find assignments that align with your goals and lifestyle. \n \n Our on-staff clinical support team—alongside a compassionate group of experienced recruiters—provides hands-on guidance every step of the way. From Day 1 medical benefits and a 401(k) plan to personalized career support, we’re committed to ensuring every professional we serve feels valued, cared for, and empowered to succeed. \n \n Guided by a CEO who is a Registered Nurse, MedPro is built on a foundation of clinical insight and genuine compassion for the caregiving community. Through The MedPro Experience®, we deliver travel assignments that are rewarding, memorable, and designed to help you DREAM big, EXPLORE often, and ACHIEVE greatness. \n \n \n Benefits \n \n \n • Day 1 medical, dental, and vision benefits for you and your family\n, • Weekly pay and direct deposit\n, • Unlimited Referral Bonuses starting at $500\n, • On Staff Clinical Support Team\n, • Access to nationwide travel assignments\n, • MPX+ Mobile app -24/7 real-time access to jobs, credentials, assignment details, and more\n, • Full coverage of all credentialing fees\n, • Private housing or housing allowance\n, • Tax Free Per Diems, Housing Stipends and Travel Reimbursements\n, • Company-paid life and disability insurance\n, • Travel reimbursement\n, • 401(k) matching\n \n Benefits\n \n, • Weekly pay\n, • Employee assistance programs\n, • Referral bonus\n \n

Tempur Sealy. Iconic brands. Storied history. Industry-leading innovation. Tempur Sealy is committed to improving the sleep of more people, every night, all around the world. As a leading designer, manufacturer, distributor, and retailer of bedding products worldwide, we know how crucial a good night of sleep is to overall health and wellness. Utilizing over a century of knowledge and industry-leading innovation, we deliver award-winning products that provide breakthrough sleep solutions to consumers in over 100 countries. Our highly recognized brands include Tempur-Pedic®, Sealy® and Stearns & Foster®. We hire people who have a passion for helping others find their best night’s sleep. No matter what stage of your career, you can build your future at Tempur Sealy! The Tempur-Pedic sales associate’s primary responsibility is to provide excellence in customer service while selling and marketing Tempur-Pedic products. In addition, this individual will serve as a member of management when the Store Manager is not available. This could include opening and/or closing the store as well as covering the management duties. OUR COMPANY OFFERS GREAT BENEFITS, INCLUDING: • Generous Paid Time Off: You will receive 27 paid days off on an annual basis. During the first year of employment, your paid time off will be pro-rated based on date of hire unless otherwise dictated by state or local law. Your paid time off will consist of:, • 80 holiday hours (this is a combination of fixed dates and floating holidays), • 80 vacation hours (10 vacation days), • 56 sick leave hours (7 sick days), • Competitive Medical, Dental & other wellness programs, • Disability and Life Company Paid, • 401(k) Retirement Plan Options, • Generous Employee Purchase Discounts Pay Range: The total estimated annual compensation, including base pay and incentives, is $ 40,000 - $ 60,000. What You’ll Do (Essential Duties and Responsibilities): • Assist in managing and maintaining responsibility for the overall performance of the store., • Provide leadership in all areas of the sales process, including customer service and care, maintaining a professional appearance, adhering to company policies and procedures, and in maintaining Tempur Sealy’s brand., • Continue to perform all the Retail Sales Associate responsibilities at an exceptional level., • Assist the Store Manager in identifying deficiencies and solving problems in the store and within the sales team., • Assist the store manager with merchandising, implementing company programs, and other needs., • Solve problems within the sales team and direct larger issues to the Store Manager., • Perform other duties as assigned. What You’ll Need (Qualifications): • High school diploma or equivalent, • 1-3 years’ retail experience (or equivalent combination of education and experience) with high-end luxury and/or custom products, • Strong sales skills in a consultative environment, • Demonstrated ability to effectively lead, direct, and train others in a store setting., • Skilled at current best practice retail methods, procedures, and standards, • Demonstrated collaborator able to both lead and follow., • Flexibility in work schedule reflecting the needs and patterns of store hours., • Fluency with current retail software / computer systems, • Must be able to stand for lengthy periods of time and occasionally lifting items with or without assistance. Tempur Sealy is proud to be an Equal Employment Opportunity and Affirmative Action employer. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type based upon race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Please connect with me on LinkedIn as well _ Job Title: Insurance Defense Litigation Paralegal Location: Iselin NJ 08830 Salary/Payrate: 85-100K Work Environment: Hybrid (3 days WFH after 60 day ramp up period of 100% onsite) Term: Fulltime Bachelor’s degree required: No Referral Fee: AMS will pay $500 should the person you refer gets hired Job Description: Litigation Paralegal with experience in the area of insurance defense and general civil litigation who will perform a variety of duties including researching law, investigating facts, and preparing documents for attorneys according to established policies and procedures. Responsibilities: • Continual review and management of case files from inception through mediation/arbitration/trial/settlement;, • Prepare subpoenas compelling depositions and/or document productions;, • Prepare initial discovery, i.e., interrogatories, request for production, request for admissions;, • Prepare draft responses to discovery, including document productions and corresponding privilege logs;, • Prepare attorneys for depositions;, • Prepare depositions summaries/abstracts;, • Research, vet and engage with subject matter experts;, • Monitor deadlines for responses and timeliness;, • Prepare legal documents such as briefs, pleadings, fact/medical chronologies, agreements, and/or trial and/or mediation binders for use by attorneys;, • Investigate facts as requested by attorneys;, • Capture and record billable time in compliance with firm policies and client guidelines;, • Trial preparation - prepare trial subpoenas, trial notebooks, exhibit lists, witness lists; engage in witness management; schedule trial testimony; prepare and manipulate trial presentations and other trial-related tasks as necessary; and, • Attend trial as necessary. Qualifications: • A minimum of five years of general civil litigation experience., • Bachelor’s degree is preferred., • Computer Skills: Must have working knowledge of internet and proficiency with: Excel, Microsoft Word, PowerPoint, Adobe Acrobat Pro, LexisNexis, Pacer, Relativity, Sanction, TrialPad, and iManage., • Written Communication: Writes clearly and informatively; edits work for spelling and grammar; varies writing style to meet needs; able to read and interpret written information., • Oral Communication: Listens and obtains clarification when necessary; responds well to questions., • Problem Solving: Identifies and resolves problems in a timely manner; gathers and analyzes information skillfully.

NO C2C OR THIRD PARTY INQUIRIES Help Desk Analyst Location: Onsite New Brunswick, NJ Shift: 8:30am - 5pm Rate: $24 - $27/hr • COVID-19 Vaccination: Must have proof of vaccination and must be fully vaccinated, • COVID-19 Booster Shot: Must have proof of booster shot (when eligible) POSITION SUMMARY The Help Desk Analyst position will provide clinical technical support for physicians, residents, and nurses in Paragon, (PCH, CCS, Emergency Department, and Operating Room Management, etc) and Athena EMR Systems. ESSENTIAL RESPONSIBILITIES • Provide helpdesk phone support and remote support for end-users., • Provide desktop support (hardware & software) for end users on-site, • Monitor servers and follow escalation procedures to on-call analysts for clinical application incidents, system alerts, and network & interface issues., • Perform software installation and upgrades, as needed, • Utilize manual and automated processes/tools to monitor and maintain computing environments., • Assist in supporting backup & restoration processes and procedures., • Assist in the design, deployment, and maintenance of administrative, physical, and technical security controls as they relate to the helpdesk function/user communities., • Ensure that all client process and procedures have been implemented, understood, and followed., • Ensure proper use of client equipment and sensitive security information and reports REQUIREMENTS • Minimum of 3yrs helpdesk experience, • CompTIA A+ Certification, • Exceptional interpersonal and customer service skills including deescalating frustrated callers and providing "white glove support" to medical professionals or executives, • Experience using a ticketing system, • Proficient in MS Office & Outlook, • Strong leadership skills, • Ability to explain technical issues to non-technical people, • Strong analytical and problem-solving skills with consistent conclusions, • Familiarity with troubleshooting computer-related problems, specially with interval client computing platforms and network connectivity, • Basic understanding of laws and regulations regarding the EEOC and ADA, • Ability to provide practical solutions to complex problems in an independent work environment

Job Description With safety as the top priority, Prototype Technician IIs are accountable for delivering batteries that meet product and quality specifications. All prototype lab team members are responsible for producing the required number of cells and batteries for testing each day during the week. Team members are responsible for receiving, testing, analyzing, recording, and reporting results of the product and test. Team members work independently in different functional areas to meet the daily and weekly objectives and may be assigned to work in one or more of the following focuses: 1. Prep: • Visually inspect each part for defects and cleanliness., • Manually connect bolts, washers, and nuts., • Heat shrink wrap on bolts and tie rods., • Wash individual and pre-assembled components per supplied work instructions., • Prepare modifications to parts where needed (shaving, cutting, drilling). 1. Welding • Visually inspect each part for defects and cleanliness., • Use parallel welder to attach metal pieces to one another. 1. Conductive Plastic Terminal • Visually inspect each part for defects and cleanliness., • Cut and prepare plastic according to work instruction., • Assembly conductive plastic according to work instruction., • Mark materials for identification and quality control., • Run a hot press., • Prepare, load, monitor, and unload part to the hot press. 1. Assembly • Visually inspect each part for defects and cleanliness., • Align parts and connect according to work instructions., • Update traveller with cell/battery specs. 1. Quality Control • Visually inspect each part for defects and cleanliness., • Run tests to ensure battery is assembled correctly without leaks., • Update traveller with cell/battery specs. 1. Filling • Measure and mix chemicals to create electrolyte batch., • Measure and transfer electrolyte from batch to cells/batteries., • Visually inspect each cell/battery for defects and cleanliness., • Update traveller with cell/battery specs. 1. Measuring • Visually inspect each part for defects and cleanliness., • Run electrochemical tests and update traveller with details. 1. Field Projects • The prototype team may occasionally be asked to assist the Field Operations team with:, • Manual labor in renewable construction projects., • Connecting batteries, • Running tests to ensure battery is installed correctly without any damage Responsibilities • Help equipment operators and other skilled labor when necessary, • Abide by all company regulations, policies, work procedures and instruction, • Load or unload construction materials., • Knowledge and ability to operate all lab stations., • All Team Members are responsible for maintaining shop cleanliness and assisting in maintain material inventory., • Other duties, responsibilities and activities may change or be assigned at any time with or without notice. Knowledge, Skills, and Abilities • Strong knowledge of shop equipment (CNS’s routers, table saw, drill press, welders, and other hand tools) and work safety., • Ability to work independently with little to no supervision., • Good communication and organization skills, • Knowledge of inspection tools such as dial clippers, micrometers, profilometers and other shop related inspection tools., • Ability to collaborate with design team in order to refine existing design efforts., • Background in R&D environment a plus Education and Experience • High school diploma or equivalent required., • Associate's degree, trade school, or equivalent experience required. Travel • Local Travel, • Overnight/North America: Less than 10% Working Conditions • Factory - The worker may be subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, vibration, moving vehicles, electrical current, exposure to temperature changes or exposure to chemicals. While performing the duties of this job, the employee may be exposed to fumes, airborne particles, odors, dust, mists, and gases. The noise level in the work environment can be loud. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Machinery operation requires the use of safety equipment to include but not limited to eye safety glasses, hearing protectors, work boots, and lab coats. May be required to exert up to 50 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body, • Customer/Partner Locations – Employee may visit customer or partner locations that may be comprised of office, manufacturing floor, laboratory environments and construction sites depending on the location and reason for visit.

Start your career with us! Recent college graduates are encouraged to apply. No prior claims experience is required. You will receive comprehensive paid training and the opportunity to build a rewarding career in the insurance industry. This individual is responsible for the handling of Auto Property Claims in accordance with NJ Unfair Practices Act. The environment is fast paced with heavy phone work. The position requires patience and the ability to function professionally in adversarial situations. RESPONSIBILITIES • Investigate and interpret policy provisions, endorsements and conditions to make a coverage determination in the automobile property claim., • Identify and investigate Contested Coverage Claims with recommendation prepared for coverage committee., • Responsible for the investigation of the auto accident to make a liability assessment. This includes interviewing first and third party claimants, witnesses, investigating officers and other relevant parties, along with securing pertinent records, documentation and loss scene information., • Analyze the investigation to determine proximate cause, negligence, and damages., • Evaluate and adjust reserves as necessary., • Prepare dispatch instructions for field personnel to inspect vehicles., • Negotiate and settle claims within his/her individual authority., • Submit claims for approval to supervisor when over his/her authority or for guidance, review and/or referral when appropriate., • Maintain an effective follow-up system on pending files., • Prioritize and handle multiple tasks simultaneously., • Adjust to fluctuating workload., • Advise insureds, claimants, brokers on the status of the claim., • Act as an intermediary between the Company, preferred vendors and customers., • Resolve all disputes that may arise., • Ensure that service, loss and expense control are maintained at all times., • Adhere to privacy guidelines, law and regulations pertaining to claims handling., • Investigate and initiate subrogation when applicable., • Handle and respond to arbitration and special civil part lawsuits pertaining to property damage., • Participate in catastrophic claim handling as requested/needed. This may include traveling to other locations and extended hours., • Other duties as assigned. QUALIFICATIONS • Strong customer service, organizational, verbal, and written skills are required., • Basic personal computer skills including working knowledge of Microsoft Office Suite products., • Bachelor’s Degree from a four-year college or university required and/or 2-4 years of relevant work experience., • Recent college graduates are encouraged to apply! SALARY RANGE The pay range for this position is $50,000 to $59,000 annually. Actual compensation will vary based on multiple factors, including employee knowledge and experience, role scope, business needs, geographical location, and internal equity. PERKS & BENEFITS • 4 weeks accrued paid time off + 9 paid national holidays per year, • Low cost and excellent coverage health insurance options that start on Day 1 (medical, dental, vision), • Annual 401(k) Employer Contribution, • Free onsite gym at our Woodbridge Location, • Resources to promote Professional Development (LinkedIn Learning and licensure assistance), • Robust health and wellness program and fitness reimbursements, • Various Paid Family leave options including Paid Parental Leave, • Tuition Reimbursement ABOUT THE COMPANY The Plymouth Rock Company and its affiliated group of companies write and manage over $2 billion in personal and commercial auto and homeowner’s insurance throughout the Northeast and mid-Atlantic, where we have built an unparalleled reputation for service. We continuously invest in technology, our employees thrive in our empowering environment, and our customers are among the most loyal in the industry. The Plymouth Rock group of companies employs more than 1,900 people and is headquartered in Boston, Massachusetts. Plymouth Rock Assurance Corporation holds an A.M. Best rating of “A-/Excellent”.

Job Description About Eos Energy Enterprises Eos Energy Enterprises, Inc. is accelerating the shift to American energy independence with positively ingenious solutions that transform how the world stores power. Our breakthrough Znyth™ aqueous zinc battery was designed to overcome the limitations of conventional lithium-ion technology. It is safe, scalable, efficient, sustainable, manufactured in the U.S., and the core of our innovative systems that today provides utility, industrial, and commercial customers with a proven, reliable energy storage alternative for 3 to 12-hour applications. Eos was founded in 2008 and is headquartered in Edison, New Jersey. For more information about Eos (NASDAQ: EOSE), visit _. Eos Product Compliance team is looking for a compliance engineer to join our Global Certifications Team for large scale Energy Storage Systems. The qualified candidate must have global standards practices such as UL and IEC testing knowledge and practices. In this role you will work with NRTL’s in conjunction with the Eos Product Design Team. You will be responsible for regulatory product design such as creepage a clearance evaluation, IP rating, critical component evaluation (UL/VDE), UL 94/UL746 and developing end to end product validation test plans, final reports, schedules, product test, presenting and communicating final results. This candidate must have the willingness to travel for up to 3 continuous weeks during certification testing. Responsibilities • Regulatory product architecture and design., • Support the research of new market entry requirements., • Review of products, specifications, and test plans., • Developing test criteria, methodologies, and pass/fail criteria., • Work with NRTL’s to achieve product compliance., • Working knowledge of the NRTL Data Acceptance Program., • Record keeping skills as it pertains to Test Laboratory Accreditations and Corrective Actions, • Record keeping product certification test plans, reports, certification and factory inspections Knowledge, Skills, and Abilities • Strong understanding of UL, CSA and CE process including CB Scheme, plus APAC regulations. Environmental compliance for RoHS, Weee, Reach and LCA is a plus., • Compliance certification experience; UL 1973, UL 9540, UL 9540A, UL 1741, UL 62368-1, IEC 62619, CSA 22.2 No. 107.1, NFPA 70 and NFPA 855. Knowledge of Functional Safety is a plus., • Understand safety concepts (Electrical and battery) – Risk based approach., • Demonstrated experience taking products through the certification process., • Ability to navigate/interpret ambiguity of standards., • Knowledge of EMC/EMI Testing, • Proven track record in product certifications, • High voltage/power experience, • Experience with a multitude of laboratory equipment and data acquisition tools Education and Experience • Bachelor's degree in electrical or mechanical engineering or equivalent required., • 3-5 years of experience required. Travel • Overnight/North America: 25-50% Working Conditions • Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 25 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body., • Factory - The worker may be subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, vibration, moving vehicles, electrical current, exposure to temperature changes or exposure to chemicals. While performing the duties of this job, the employee may be exposed to fumes, airborne particles, odors, dust, mists, and gases. The noise level in the work environment can be loud. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Machinery operation requires the use of safety equipment to include but not limited to eye safety glasses, hearing protectors, work boots, and lab coats. May be required to exert up to 50 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25 / hr. and $45 / hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. We are a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. Main Duties : Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.) Take care of the product being tested and use it responsibly Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.) Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses) There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm Write reviews as requested in the In-Home Usage Test Daily Schedule for each project Requirements : Ability to follow specific instructions Excellent attention to detail and curious spirit Be able to work 15-25 hours per week and commit to a certain routine Have access to a computer and a reliable internet connection Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. Benefits : Very competitive pay rate Weekly pay Work around your own schedule Learn about an exciting industry Telecommute (you can work from home, work or school) Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25 / hr. and $45 / hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. We are a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. Main Duties : Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.) Take care of the product being tested and use it responsibly Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.) Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses) There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm Write reviews as requested in the In-Home Usage Test Daily Schedule for each project Requirements : Ability to follow specific instructions Excellent attention to detail and curious spirit Be able to work 15-25 hours per week and commit to a certain routine Have access to a computer and a reliable internet connection Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. Benefits : Very competitive pay rate Weekly pay Work around your own schedule Learn about an exciting industry Telecommute (you can work from home, work or school) Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Job Description Remote Insurance Sales Representative | Flexible Schedule | Commission-Based This position offers flexible work hours and clear paths for advancement into leadership and management. You will work remotely, serving clients by providing guidance and protection solutions for individuals and families. What We Offer • Remote, work-from-home career, • Average first-year earnings of $69K through commissions and bonuses, • Increased earning potential in later years through performance and renewals, • Residual income opportunities through client renewals, • Unionized position with stock options, • Comprehensive benefits package including medical, dental, and prescription coverage, • Ongoing training and mentorship from experienced managers, • High-quality leads provided with no cold calling friends or family, • Flexible scheduling within a career-focused structure, • Advancement and recognition opportunities with promotion from within, • Supportive and collaborative virtual team environment Qualities We Value • Willingness to learn and be coached through structured training, • Friendly, outgoing, and professional communication style, • Genuine desire to help others by providing guidance and solutions, • Strong verbal communication and relationship-building skills, • Sales or customer service experience is helpful but not required Qualifications • Laptop or desktop computer with a working camera, • Insurance license required or willingness to obtain one, • Basic computer skills, • Must reside in North America including the United States or Canada, • We do not hire candidates residing outside North America Responsibilities • Contact provided leads to schedule virtual meetings with clients, • Present benefit programs and assist clients with enrollment, • Build and maintain strong client relationships, • Work closely with your manager to set goals and achieve them

Job Description Remote Sales Agent HMG Careers | Remote - Canada and United States Your ambition doesn't need an office. Build a sales career working from home. To succeed, you'll need to be organized and disciplined. In addition to a great income, you'll be representing an established insurance brand that serves union members, veterans, and their families across Canada and the United States. You will be provided with leads, training, technology, and ongoing support. Your role is to connect with prospective clients, understand their needs, and help them select benefit programs designed to protect the people they care about. First-year earnings are estimated at $67,000 - $70,000, based on individual sales performance. What you'll do • Contact company-provided leads to schedule virtual benefit consultations., • Meet with prospective clients through Zoom., • Explain available benefit programs clearly and help clients make informed enrollment decisions., • Serve union members, veterans, working families, and members of established partner organizations., • Work with your regional manager to establish clear activity and performance goals. Why join us • 100% remote, work-from-home position, • No traditional cold calling, • Commission and bonus compensation, • Renewal commissions that can create long-term income, • Medical, dental, and prescription benefits, • Stock-option opportunities, • Comprehensive training and licensing support Who we're looking for You do not need previous insurance experience. Comprehensive training is provided. The candidates who really thrive in this role are coachable, dependable, and comfortable speaking with our clients. You may be a strong fit if you: • Communicate clearly in writing, over the phone, and through video meetings, • Enjoy helping people understand important financial and benefit decisions, • Can manage your own schedule and stay focused without constant supervision, • Have basic computer skills and are comfortable using Zoom, • Have sales, customer-service, hospitality, recruiting, or other people-facing experience Licensing and eligibility You must hold or be willing to obtain the life-insurance license required in your province or state. If you are not currently licensed, we will help you understand the licensing process and identify an appropriate solution. Applicants must be legally authorized to work in Canada or the United States. About HMG Careers HMG Careers hires insurance advisors working with agencies across Canada and the United States. Our advisors represent an established global brand and serve members of unions, veterans' organizations, and other partner groups. We believe good sales work begins with trust. That means listening carefully, explaining benefits honestly, following through, and helping clients protect the people who depend on them.

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25 / hr. and $45 / hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. We are a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. Main Duties : Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.) Take care of the product being tested and use it responsibly Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.) Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses) There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm Write reviews as requested in the In-Home Usage Test Daily Schedule for each project Requirements : Ability to follow specific instructions Excellent attention to detail and curious spirit Be able to work 15-25 hours per week and commit to a certain routine Have access to a computer and a reliable internet connection Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. Benefits : Very competitive pay rate Weekly pay Work around your own schedule Learn about an exciting industry Telecommute (you can work from home, work or school) Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Job Description SUMMARY: The Process Engineer is responsible for developing, qualifying, and optimizing injection molding processes using scientific molding principles. This role supports Manufacturing with process, machine, and mold-related issues, leads process improvement and troubleshooting efforts, and ensures production-ready molds and processes are successfully implemented. The position also provides technical leadership, training, and mentorship while driving process capability, continuous improvement, and data-driven solutions. ESSENTIAL FUNCTIONS: • New and existing mold qualification using scientific molding principles, • Support manufacturing with process and process versus machine/mold related issues, • Deliver and hand off production ready molds and processes to Somerset, NJ manufacturing site., • Perform alternative resin qualifications & provide data driven reporting on feasibility of implementation, • Perform design of experiments & SIM studies including cavity balance, pack/hold studies, rheology curves and clamp tonnage scans, • Assist with root cause analysis and corrective action implementation, • Provide technical leadership and mentorship to process technicians, operators and other molding personnel., • Support Manufacturing Operations with continuous improvement and process optimization programs, • Assist manufacturing sites with process control and process development training developed by engineering solutions team., • Drive continuous improvement “In Control & Capable” process monitoring efforts. QUALIFICATIONS/TRAVEL: • 7+ yrs. of hands-on experience in process engineering (preferably in a high volume, high cavitation molding environment), • BS or BSAS Engineering Degree. Disciplines of Plastics, Mechanical or Chemical are preferred., • Strong and diverse technical background in injection molding processing., • Experience with Stack Molds preferred, • Caps/Closures experience ideal with medical and packaging molding secondary, • Experience with Systematic Molding. Ex: RJG, John Bozelli, AIM, • Experience with hot runner systems (Husky, Manner, Mold Master), hot tip & valve gated, • Demonstrated superior communication (written and verbal), teamwork, and organizational skills., • Excellent computer skills, Word, Excel, PowerPoint etc., • Demonstrates ability to think out of the box and recommend options., • Demonstrate teamwork in a cross-functional environment, • Proven ability to develop, train & mentor process technicians, • <25% domestic travel. Mainly to other MRP sites as needed., • Must be local to MRP manufacturing site in Somerset, NJ., • It may be required to occasionally lift up to 50 pounds About MRP: MRP Solutions (MRP), a plastic cap manufacturer, is a leading provider of high-quality, injection molded plastic closures, jars and packaging components used every day by millions of consumers around the globe. But we offer more than just plastic caps and lids – we deliver industry-leading packaging solutions tailored to each customer’s unique requirements, providing best-in-class product protection while ensuring consumer confidence. MRP Solutions combines extensive packaging expertise with a consultative approach to reliably uncover customer needs. By understanding your business goals, we can tailor smarter, safer, and more flexible packaging solutions that reduce cost and increase speed to market, helping your businesses capitalize on opportunity. By constantly innovating, MRP enables our customers to grow, making us a preferred partner. We are passionate about partnering with distributors and manufacturers who understand that plastic caps and lids are a small but important part of how people experience their brands. Together, we deliver packaging with purpose. Our Vision: We deliver industry-leading packaging solutions tailored to each customer’s unique requirements, providing best-in-class product protection while ensuring consumer confidence. By constantly innovating, MRP enables our customers to grow, making us a preferred partner. Our Values & Beliefs • Integrity – We have the courage to act with the highest level of integrity, even when no one is watching. We do what is right 100% of the time., • Value Creation – The sole reason a company exists is to create real long-term value for society. This starts with ensuring human safety, as value cannot be created without first protecting human life. We seek opportunities for mutual benefit with all of our stakeholders, including customers, employees, shareholders, suppliers, and the communities in which we operate. In everything we do, our overarching goal is to deliver superior results.., • Accountability - We are accountable to each other and to our stakeholders. We say what we do and do what we say. We embrace a culture of ownership, empowering and equipping employees with the ability to own their outcomes., • Entrepreneurial - Everyone thinks and acts like owners, employing good economic and critical thinking skills while adopting the risk profile of our shareholders. We are inquisitive, constantly seeking out opportunities to improve, actively searching for and innovating across each and every aspect of our business. We relentlessly strive to understand and profitably anticipate what our customers need and value, because if our customers do not grow, we do not grow., • Respectful and Friendly – Everyone deserves to be treated with respect and dignity. Because everyone's perspective has value, we embrace diversity of thought, background and experiences. We are friendly and lead with a smile. What we do is important, but how we do it is what makes it impactful., • Change - We actively seek out and embrace change wherever profitable. Because society is constantly identifying and employing new and better ways of accomplishing tasks, we must constantly innovate, reinvent and, ultimately, destroy the old ways of doing business. We actively engage in rigorous debate and embrace challenge to ensure we stay relevant and deliver superior results., • Fulfillment – Our employees are the foundation of our success. We foster an environment enabling our employees to learn, grow and accept more accountability as they demonstrate capability. We promote more than just individual connection as community at work brings people together through common interest, objectives or experiences. MRP Solutions is an equal opportunity and affirmative action employer. We do not discriminate in recruiting, hiring or promotion based on race, color, religion, sex (including sexual orientation, gender identity or expression, transgender status), national origin, age, disability, medical condition, marital or protected veteran status or any other basis or characteristic prohibited by applicable federal, state, or local law. Consistent with the obligations of state and federal law, MRP Solutions will make reasonable accommodations for qualified individuals with disabilities. Any employee who needs a reasonable accommodation should contact Human Resources #INDS

Job Description All American Ford is looking for skilled Commercial Vehicle Automotive Technician to grow within our reputable dealership. We are also excited to announce that we have a fully air conditioned shop! This position has the compensation of $35 - $52 hourly. Responsibilities: • Able to diagnose and repair automotive systems including engines, steering, brakes, suspension, transmission, air conditioning, etc., • Completes service and repair assignments efficiently, safely and correct to pass quality inspections., • Comply with company safety policies and procedures., • Communicate directly with service advisors regarding the status of service work., • Continuously learn new technical information and techniques. Benefits: • Flat-rate pay with an abundance of bonus opportunities, • Medical & dental benefits, • Paid holidays, • Paid vacation, • Sick time, • 401(k), • Employee pricing & discount benefits, • Air conditioned shop, • Tool assistance, • Paid training, • No Sundays, • A professional & respectful work environment Qualifications • 2+ years of Service Technician experience preferred, • High school diploma or equivalent, ASE Certification required, • Ford Certification, • Previous experience at a Ford dealership is preferred, • A level qualifications, including Diagnostic, Electrical and Engine Repair, • Dexterity, requiring a steady hand, excellent hand-eye coordination, • Mechanical and troubleshooting skills and ability to operate electronic diagnostic equipment, • Excellent customer service skills and basic computer competencies, • Positive, friendly attitude, along with an eagerness to improve, • Enjoy working in a dynamic environment, • Teammate with ability to collaborate with others effectively, • Ability to learn new technology, repair and service procedures and specifications, • Must have valid license, • Must have a clean Motor Vehicle Record, • Ability to pass background check required There are opportunities for growth and long term careers here at All American Ford. Please apply for further details. We look forward to hearing from you!

Job Description The Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to: · Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery. · Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines. · Verifies material, lubricants, solvents and packaging material are correct. · Produces products that conform to all of the requirements outlined in the job book · Monitors production process during the production run · Performs maintenance activities where applicable · Stops production when product is not in conformance and follows the nonconformance procedure. Product Inspection and Nonconformance Process 40% · Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book. · Completes all necessary documentation. · Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred. · 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · SPC · Blueprint OTHER SKILLS · WIP tracking · Multitasking · Personal Accountability · Problem solving · Spatial dexterity · Manual dexterity · Attention to detail · Organizational skills · Basic computer skills Hourly starting rate: $18.65 + 5% differential per hour MICRO offers a comprehensive benefits package to eligible employees, including medical, dental and vision insurance; life and disability insurance; a 401(k)-retirement plan; paid time off; paid holidays; and other company-sponsored benefits. Eligibility and benefit offerings are subject to the terms of the applicable plans and company policies. While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job Description About Us ADESA, a Carvana owned company, currently operating over 50 locations throughout the US. Our auto auctions, some up to 200 acres, provide a wide array of vehicle services including repair & reconditioning, auction remarketing, and many of our sites serve as market hub distribution centers. Our inventory comprises hundreds of thousands of vehicles across North America from retail to commercial, OEM & more. We work in a service industry and embrace a "we" versus "I" culture – help others, and they will help you. Our industry is fun, fast-paced, and competitive – and filled with the best people who are passionate about what they do. We're excited about the future! As an industry leader, ADESA is poised for a multi-year expansion including huge investments in facilities, massive sales growth, and an ever-increasing inventory of vehicles! We are looking for great people who want to take this journey with us! Role and Team Reporting to the Regional Director, the General Manager is responsible for driving the Auction to success through effective leadership. This role is the primary leader for the site, setting the tone for customer and employee experience and executing strategies to support financial performance and company initiatives. The General Manager is expected to embody the company values and influence and lead others as a people, customer, and business manager for their location. Responsibilities • Identify opportunities for business growth. Regularly meet with customers, attend sales visits with Sales staff and other customer engagement opportunities. Make sure customers receive prompt, efficient and courteous attention for all contacts and transactions., • Act as change champion for the site. Understand, navigate, communicate, and ensure successful adaptation of change initiatives. Ensure proper follow-through on all directives, bulletins and schedules from the Corporate Office and Regional Director. Maintain a good flow of communication with Corporate Office, RD, key contacts within the company, and external contacts., • Attend a Profit and Loss Statement review each accounting period with the RD. Ensure accurate and timely reconciliation of accounting with weekly and monthly corporate reports. Initiate and follow up on discrepancies. Monitor accounts receivable and report variances to RD, Controller and Central Office. Control regular and overtime payroll and other business expenses to support business operations and financial objectives., • Monitor KPI's and expectations. Leverage technology and tools available. As appropriate, develop and implement action plans to support improvements, and celebrate successes., • Be familiar with procedures for handling all aspects of customer disputes and resolve any customer complaints in a friendly, courteous manner. Escalate issues to RD as necessary., • Identify, hire, train, and mentor the management of today and the future for the auction. Support recruiting, hiring and onboarding initiatives to meet business needs and corporate/legal requirements. Promote, develop and train all employees according to company guidelines., • Maintain positive employee relations and morale. Practice sound leadership and human relations principles to promote teamwork at all times. Set a good personal example of attitude and performance. Follow-through and communicate employee relations problems to the Regional Vice President and Human Resource team as appropriate. Evaluate and take positive, consistent, disciplinary action on infractions of company policies and procedures as defined in the employee disciplinary policy. Prepare and conduct performance appraisals for direct report employees and support the performance appraisal process for the team., • Conduct employee meetings at least once a month or as necessary to communicate Company and Department issues and build teamwork among the employees. Maintain a good flow of communication with Regional Vice President, and other pertinent personnel., • Account for and identify all auction inventory; monitor and report unusual activity and notify RD and appropriate corporate teams as necessary., • Monitor and control all site related conditions, vehicles, property and equipment within corporate standards for cleanliness, proper maintenance and safety. Advise Maintenance of all breakdowns and maintenance immediately. Ensure good routine preventive maintenance., • Make sure all Department area conditions do not threaten employee or customer safety. Respond to and follow proper procedures on employee and customer accidents, injuries, and loss or damage to any property. Report all incidents immediately. Ensure functional specifications are sound, efficient and support ADESA goals. Practice and instruct all employees in proper loss prevention and reaction procedures. Account for and identify all keys, codes or other safety or security information. Report all incidents properly and immediately., • Direct proper record keeping and follow-through on all sales promotions, advertising and telemarketing. Monitor and ensure compliance with sale plan layouts, corporate requirements with all contractual customers, contractors, and supplier agreements and other directives. Advise and assist with corrective procedures, if needed. Initiate and complete accurate vehicle transfers as instructed. Ensure the use of marketing tools on selected customer accounts as instructed., • Make sure company driving safety standards are met and substance abuse prevention and control procedures are followed for all activity., • Must know, practice and ensure that company policies and procedures and state and federal laws are followed at all times. Ensure that no company or customer information is inappropriately divulged to unauthorized parties. Skills and Attributes • Servant Leadership Philosophy, • Sales and Marketing Skills, • Change Management Skills, • Human Relations and Leadership Skills, • Communication Skills, • Accounting and Financial Skills, • Technical Skills Qualifications • Bachelor's degree with auction and automotive experience or High School diploma/GED with at least 5 years auction experience with 5 years automotive of similar work experience required., • Minimum 5 years of leadership/supervisory experience, • Excellent verbal and written communication skills, • Proven ability to multitask while maintaining attention to detail, • Confidentiality and integrity while handling sensitive information, • Proven ability to manage deliverables and metrics against aggressive targets and timelines, • Proficiency with computer systems and applications, • Must be 18 years of age and have a valid driver's license that meets requirements ADESA Benefits and Perks Competitive Pay | Quality Benefits | Holiday and Paid Time Off | Education and Equipment Reimbursement Programs | Matching 401(k) | Career Path Opportunities | And More! Other Requirements To be able to do your job at ADESA, there are some basic requirements we want to share with you. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. • The physical activity requirements of the position range from Light to Medium Physical Work., • Frequent – standing, watching, touching, listening, walking, talking, • Potential – running, jumping, yelling or other rapid or forceful movement in emergency situations, • Visual acuity requirements include color, depth perception and field of vision comparable to definitions for Clerical, Administrative, Machine Operators (including inspection) positions. Physical Working Conditions This position is subject to both inside and outside environmental working conditions, including temperature changes, outside weather conditions, slightly elevated ambient noise levels, and minor atmospheric conditions affecting skin or respiratory systems, such as fumes, odors and dusts associated with internal and external service station/convenience food and petroleum dispensing operations. • Note: Refer to the Handbook and Policy Manuals for important addendum requirements to all job descriptions. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. To be able to do your job at ADESA, you must be able to read, write, speak, and understand English. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. Legal Stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. ADESA is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. ADESA also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionThe Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to:· Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery.· Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines.· Verifies material, lubricants, solvents and packaging material are correct.· Produces products that conform to all of the requirements outlined in the job book· Monitors production process during the production run· Performs maintenance activities where applicable· Stops production when product is not in conformance and follows the nonconformance procedure.Product Inspection and Nonconformance Process 40%· Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book.· Completes all necessary documentation.· Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred.· 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION· None TECHNICAL SKILLS· SPC· Blueprint OTHER SKILLS· WIP tracking· Multitasking· Personal Accountability· Problem solving· Spatial dexterity· Manual dexterity· Attention to detail· Organizational skills· Basic computer skills Hourly starting rate: $18.65 + 15% differential per hour MICRO offers a comprehensive benefits package to eligible employees, including medical, dental and vision insurance; life and disability insurance; a 401(k)-retirement plan; paid time off; paid holidays; and other company-sponsored benefits. Eligibility and benefit offerings are subject to the terms of the applicable plans and company policies. While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work.While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job Description About Us ADESA, a Carvana owned company, currently operating over 50 locations throughout the US. Our auto auctions, some up to 200 acres, provide a wide array of vehicle services including repair & reconditioning, auction remarketing, and many of our sites serve as market hub distribution centers. Our inventory comprises hundreds of thousands of vehicles across North America from retail to commercial, OEM & more. We work in a service industry and embrace a "we" versus "I" culture – help others, and they will help you. Our industry is fun, fast-paced, and competitive – and filled with the best people who are passionate about what they do. We're excited about the future! As an industry leader, ADESA is poised for a multi-year expansion including huge investments in facilities, massive sales growth, and an ever-increasing inventory of vehicles! We are looking for great people who want to take this journey with us! Role and Team Reporting to the Regional Director, the General Manager is responsible for driving the Auction to success through effective leadership. This role is the primary leader for the site, setting the tone for customer and employee experience and executing strategies to support financial performance and company initiatives. The General Manager is expected to embody the company values and influence and lead others as a people, customer, and business manager for their location. Responsibilities • Identify opportunities for business growth. Regularly meet with customers, attend sales visits with Sales staff and other customer engagement opportunities. Make sure customers receive prompt, efficient and courteous attention for all contacts and transactions., • Act as change champion for the site. Understand, navigate, communicate, and ensure successful adaptation of change initiatives. Ensure proper follow-through on all directives, bulletins and schedules from the Corporate Office and Regional Director. Maintain a good flow of communication with Corporate Office, RD, key contacts within the company, and external contacts., • Attend a Profit and Loss Statement review each accounting period with the RD. Ensure accurate and timely reconciliation of accounting with weekly and monthly corporate reports. Initiate and follow up on discrepancies. Monitor accounts receivable and report variances to RD, Controller and Central Office. Control regular and overtime payroll and other business expenses to support business operations and financial objectives., • Monitor KPI's and expectations. Leverage technology and tools available. As appropriate, develop and implement action plans to support improvements, and celebrate successes., • Be familiar with procedures for handling all aspects of customer disputes and resolve any customer complaints in a friendly, courteous manner. Escalate issues to RD as necessary., • Identify, hire, train, and mentor the management of today and the future for the auction. Support recruiting, hiring and onboarding initiatives to meet business needs and corporate/legal requirements. Promote, develop and train all employees according to company guidelines., • Maintain positive employee relations and morale. Practice sound leadership and human relations principles to promote teamwork at all times. Set a good personal example of attitude and performance. Follow-through and communicate employee relations problems to the Regional Vice President and Human Resource team as appropriate. Evaluate and take positive, consistent, disciplinary action on infractions of company policies and procedures as defined in the employee disciplinary policy. Prepare and conduct performance appraisals for direct report employees and support the performance appraisal process for the team., • Conduct employee meetings at least once a month or as necessary to communicate Company and Department issues and build teamwork among the employees. Maintain a good flow of communication with Regional Vice President, and other pertinent personnel., • Account for and identify all auction inventory; monitor and report unusual activity and notify RD and appropriate corporate teams as necessary., • Monitor and control all site related conditions, vehicles, property and equipment within corporate standards for cleanliness, proper maintenance and safety. Advise Maintenance of all breakdowns and maintenance immediately. Ensure good routine preventive maintenance., • Make sure all Department area conditions do not threaten employee or customer safety. Respond to and follow proper procedures on employee and customer accidents, injuries, and loss or damage to any property. Report all incidents immediately. Ensure functional specifications are sound, efficient and support ADESA goals. Practice and instruct all employees in proper loss prevention and reaction procedures. Account for and identify all keys, codes or other safety or security information. Report all incidents properly and immediately., • Direct proper record keeping and follow-through on all sales promotions, advertising and telemarketing. Monitor and ensure compliance with sale plan layouts, corporate requirements with all contractual customers, contractors, and supplier agreements and other directives. Advise and assist with corrective procedures, if needed. Initiate and complete accurate vehicle transfers as instructed. Ensure the use of marketing tools on selected customer accounts as instructed., • Make sure company driving safety standards are met and substance abuse prevention and control procedures are followed for all activity., • Must know, practice and ensure that company policies and procedures and state and federal laws are followed at all times. Ensure that no company or customer information is inappropriately divulged to unauthorized parties. Skills and Attributes • Servant Leadership Philosophy, • Sales and Marketing Skills, • Change Management Skills, • Human Relations and Leadership Skills, • Communication Skills, • Accounting and Financial Skills, • Technical Skills Qualifications • Bachelor's degree with auction and automotive experience or High School diploma/GED with at least 5 years auction experience with 5 years automotive of similar work experience required., • Minimum 5 years of leadership/supervisory experience, • Excellent verbal and written communication skills, • Proven ability to multitask while maintaining attention to detail, • Confidentiality and integrity while handling sensitive information, • Proven ability to manage deliverables and metrics against aggressive targets and timelines, • Proficiency with computer systems and applications, • Must be 18 years of age and have a valid driver's license that meets requirements ADESA Benefits and Perks Competitive Pay | Quality Benefits | Holiday and Paid Time Off | Education and Equipment Reimbursement Programs | Matching 401(k) | Career Path Opportunities | And More! Other Requirements To be able to do your job at ADESA, there are some basic requirements we want to share with you. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. • The physical activity requirements of the position range from Light to Medium Physical Work., • Frequent – standing, watching, touching, listening, walking, talking, • Potential – running, jumping, yelling or other rapid or forceful movement in emergency situations, • Visual acuity requirements include color, depth perception and field of vision comparable to definitions for Clerical, Administrative, Machine Operators (including inspection) positions. Physical Working Conditions This position is subject to both inside and outside environmental working conditions, including temperature changes, outside weather conditions, slightly elevated ambient noise levels, and minor atmospheric conditions affecting skin or respiratory systems, such as fumes, odors and dusts associated with internal and external service station/convenience food and petroleum dispensing operations. • Note: Refer to the Handbook and Policy Manuals for important addendum requirements to all job descriptions. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. To be able to do your job at ADESA, you must be able to read, write, speak, and understand English. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. Legal Stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. ADESA is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. ADESA also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Come join an exciting and innovative company that puts the “care” back in healthcare! Why do IT Professionals want to work here? The reason people love working for KabaFusion is because of the impact we have on our patients. Here, it doesn’t matter what your role is, you will be part of a team that works collaboratively to change lives. You will go home knowing you’ve made a difference and improved someone’s life. About us: What started as a single pharmacy in 2010 has grown into KabaFusion becoming the largest privately held home infusion company in the country. We have a national network of pharmacies and nursing offices strategically placed to service 40+ states. Couple that with over 30 years of combined experience and it’s no wonder why KabaFusion is the industry leader in home infusion. About the role: This position is responsible for leading the design, implementation, maintenance, and continuous improvement of KabaFusion’s enterprise IT infrastructure and systems, while establishing technical direction, standards, and best practices for the infrastructure environment. This role provides hands-on technical leadership, guides and mentors engineers, and coordinates infrastructure initiatives across IT, Cybersecurity, Compliance, vendors, and service providers to ensure secure, reliable, and effective technology solutions. In addition, this position also leads infrastructure resiliency, risk mitigation, and disaster recovery efforts to support business continuity and protect critical systems and data. Essential Duties & Responsibilities: 1. Leads the architecture, design, implementation, and ongoing optimization of enterprise network, server, cloud, storage, virtualization, and related infrastructure environments., 2. Establishes technical direction, infrastructure standards, and best practices to ensure scalable, secure, reliable, and supportable technology solutions across the organization., 3. Leads complex infrastructure projects and technology initiatives, including system implementations, upgrades, migrations, integrations, and infrastructure modernization efforts., 4. Ensures the availability, performance, security, and resiliency of business-critical infrastructure through effective architecture, monitoring, capacity planning, redundancy, and lifecycle management., 5. Leads infrastructure security and risk mitigation efforts, partnering with Cybersecurity and Compliance to maintain appropriate safeguards and support applicable security, privacy, and regulatory requirements, including HIPAA., 6. Provides technical leadership and mentorship to infrastructure engineers and other IT team members, guiding technical decisions, troubleshooting complex issues, and promoting consistent engineering practices., 7. Leads infrastructure business continuity and disaster recovery capabilities, ensuring appropriate recovery strategies, redundancy, testing, and preparedness for critical systems and services., 8. Partners across IT and business functions to translate operational and technology requirements into effective infrastructure solutions that support organizational needs and growth., 9. Provides technical oversight of infrastructure vendors and service providers, ensuring solutions and services meet established performance, security, reliability, and technical requirements., 10. Evaluates infrastructure architecture, technologies, risks, and emerging capabilities to identify and lead improvements in performance, security, scalability, reliability, and operational efficiency., 11. Other related duties as assigned by manager or designee. JOB REQUIREMENTS AND QUALIFICATIONS Education: • Bachelor’s degree in computer science, information systems, or other related field; equivalent professional experience in a relevant industry may also be considered. Certifications or Licenses: • Required: at least one active, current senior-level certification, such as Azure Solutions Architect Expert, Azure Administrator Associate, CCNP, ASWAWS Certified Solutions Architecture, or other relevant industry certificationsVMware VCP, or an equivalent senior-level cloud, infrastructure, or network certification, • Minimum of one (1) active and or senior level certification required: Azure Solutions Architect Expert, Azure Administrator Associate, CCNP, AWS Certified Solutions Architect, VMware VCP, or an equivalent senior-level cloud, infrastructure, or other network or relevant industry certifications. Experience: • Minimum of seven (7) years of progressively responsible infrastructure engineering experience, including demonstrated experience leading the design, implementation, and support of complex enterprise infrastructure environments., • Demonstrated experience owning and providing technical direction for cloud or hybrid infrastructure environments, including architecture, security, reliability, performance, and lifecycle management., • Experience supporting distributed, multi-site environments with significant endpoint, remote workforce, and field-based technology requirements., • Experience with cloud, productivity, identity, and endpoint management platforms, including AWS, Azure, Microsoft 365, Intune/MDM, or equivalent technologies., • Experience leading complex infrastructure implementations, migrations, integrations, and modernization initiatives across enterprise environments., • Experience developing and supporting high-availability, disaster recovery, business continuity, and infrastructure resiliency solutions., • Experience working in a regulated environment and supporting security and compliance frameworks or requirements such as HIPAA Security Rule, HITRUST, NIST CSF, or equivalent standards., • Experience providing technical leadership, mentoring engineers, establishing infrastructure standards, and guiding complex technical decisions without requiring direct supervisory responsibility. Technical Skills • Advanced knowledge of enterprise infrastructure architecture, including network, server, cloud, storage, virtualization, identity, and endpoint technologies., • Strong expertise in cloud and hybrid infrastructure environments, including AWS, Azure, Microsoft 365, Intune/MDM, or equivalent platforms., • Ability to architect, evaluate, and implement scalable, secure, highly available, and resilient infrastructure solutions., • Advanced knowledge of network architecture, security, connectivity, and performance optimization across distributed, multi-site environments., • Strong knowledge of infrastructure security, risk management, and technical controls supporting regulated environments and frameworks such as HIPAA, HITRUST, and NIST., • Expertise in infrastructure resiliency, high availability, backup, disaster recovery, and business continuity technologies and practices., • Strong technical troubleshooting and root-cause analysis capabilities across complex infrastructure environments., • Ability to establish and apply infrastructure architecture standards, technical best practices, and technology lifecycle strategies. Competencies / Soft Skills • Demonstrates technical leadership and sound judgment, with the ability to establish direction and guide complex technical decisions., • Ability to lead technical initiatives and influence outcomes across teams without relying on direct supervisory authority., • Strong analytical and problem-solving skills, with the ability to assess complex issues, risks, and competing solutions., • Strong planning, prioritization, and execution skills with the ability to lead multiple complex initiatives and changing priorities., • Effective mentoring and knowledge-sharing skills that support the development and effectiveness of other technical team members., • Strong verbal and written communication skills, including the ability to translate complex technical information for technical and non-technical audiences., • Demonstrates strong collaboration and relationship-building skills with IT, Cybersecurity, Compliance, business stakeholders, vendors, and service providers., • Demonstrates initiative, accountability, adaptability, and continuous improvement, with a focus on driving infrastructure reliability and operational effectiveness. Our Benefits: • Competitive Compensation, • Benefits start on your 1st day of employment., • 401k w 4% match – no waiting or vesting period, • PTO / Floating Holidays / Paid Holidays, • Company paid life insurance, STD, • Employee Assistance programs to help with mental health / wellness, • Learning & Development Programs, • Perks… includes discounts on travel, cell phone, clothing and more…, • Generous employee referral program KabaFusion is a mission driven company with a focus on innovation and patient care so, as an IT Engineering Lead, if that sounds like something you want to be a part of, then look no further.

Job Description Remote Insurance Sales Representative | Flexible Schedule | Commission-Based This position offers flexible work hours and clear paths for advancement into leadership and management. You will work remotely, serving clients by providing guidance and protection solutions for individuals and families. What We Offer • Remote, work-from-home career, • Average first-year earnings of $69K through commissions and bonuses, • Increased earning potential in later years through performance and renewals, • Residual income opportunities through client renewals, • Unionized position with stock options, • Comprehensive benefits package including medical, dental, and prescription coverage, • Ongoing training and mentorship from experienced managers, • High-quality leads provided with no cold calling friends or family, • Flexible scheduling within a career-focused structure, • Advancement and recognition opportunities with promotion from within, • Supportive and collaborative virtual team environment Qualities We Value • Willingness to learn and be coached through structured training, • Friendly, outgoing, and professional communication style, • Genuine desire to help others by providing guidance and solutions, • Strong verbal communication and relationship-building skills, • Sales or customer service experience is helpful but not required Qualifications • Laptop or desktop computer with a working camera, • Insurance license required or willingness to obtain one, • Basic computer skills, • Must reside in North America including the United States or Canada, • We do not hire candidates residing outside North America Responsibilities • Contact provided leads to schedule virtual meetings with clients, • Present benefit programs and assist clients with enrollment, • Build and maintain strong client relationships, • Work closely with your manager to set goals and achieve them

Job Description Company Profile: Diakon Logistics provides white-glove, last-mile delivery solutions for leading furniture and appliance retailers nationwide. Come join our growing company, where we are deeply committed to employee development and fostering an internal promotional structure that rewards dedication and growth. We prioritize investing in our team members, offering clear pathways for advancement from entry-level roles to management positions through comprehensive training and mentorship programs. Job Overview: In this dispatch/admin position, you will guide deliveries of merchandise and appliances to customers by coordinating a group of independent contractor carriers in a call center environment. With the leadership and support of the location management staff, you will work cross-functionally with key partners in our corporate office and client leadership to effectively achieve or exceed goals and produce outcomes in line with the company’s vision. Responsibilities and Duties: • Provides administrative support for delivery operations., • Consistent and immediate communication of operational challenges and customer escalations while executing timely resolutions., • Answers a high volume of calls, screens calls, schedules appointments., • Heavy customer service and dispatching., • Route monitoring and communicating with delivery teams throughout the day., • Determine priorities and multi-tasks., • Maintains historical records by tracking and accurately recording information., • Contributes to team effort by accomplishing assigned tasks and effectively communicating to responsible parties across the network. Skills/Requirements: • Bilingual with Spanish a plus., • Excellent computer skills with experience using Excel and MS Office applications., • Data Entry Skills, Thoroughness, Organization, Attention to Detail, • Excellent written and verbal communication skills., • Dependable, with a strong focus on customer service and time management., • High school Diploma or GED required. Schedule: Employees will work 5 days a week at this 6 days a week location. This is an in-office position - no remote or hybrid options available. Hourly Rate: $17-$19/hour, DOE + bonus potential. Diakon offers competitive wages and bonuses, medical benefits, 401(k) plan with match and paid vacations and holidays to full-time employees.

Job Description Job Title: Pipefitter - HVAC Systems Job Description As a Pipefitter, you will be responsible for the installation of piping for HVAC systems, including brazing, soldering, and welding pipes and ductwork. You will work with various HVAC system types such as rooftop forced air systems, ductless split air systems, large split central systems, cooling towers, and water-cooled packaged systems. Responsibilities • Install piping for HVAC systems., • Brazing, soldering, and welding pipes and ductwork for HVAC systems., • Work on system types including rooftop forced air systems, ductless split air systems, large split central systems, cooling towers, and water-cooled packaged systems., • Install hot water and steam coils, modular chillers, make-up air systems, industrial and kitchen ventilation fans., • Install precision temperature systems for computer rooms., • Installation of sheet metal duct systems. Essential Skills • Experience in fitting HVAC systems., • Skill in sheet metal installation., • Knowledge of EPA standards., • Proficiency in blueprint reading., • Experience in welding and brazing., • Construction knowledge., • OSHA 10 and OSHA 30 certifications. Additional Skills & Qualifications • Experience working under a foreman and alongside other pipefitters., • Experience with commercial projects, new construction, renovations, and service work. Why Work Here? Enjoy working on high-end custom projects with no winter layoffs, ensuring a busy schedule all year round. Benefit from a comprehensive package including 401K, health, dental, and vision benefits, as well as paid travel for distant projects. Employees receive 2 weeks of paid vacation, 8 paid holidays, and 5 sick days. A company phone, tablet, van, uniform, and EZ Pass are provided. Education assistance is available for additional classes and even a 4-year degree in construction. Work Environment Based in South Amboy, employees either travel directly to the site or meet at the office in the morning to ride to the site. The team includes field supervisors, project managers, estimators, a service manager, a controls manager, dispatch personnel, service technicians, and helpers. Work hours are from 7 am to 3:30 pm. Job Type & Location This is a Contract position based out of Old Bridge, NJ. Pay and Benefits The pay range for this position is $30.00 - $43.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract position based out of Old Bridge, NJ. Application Deadline This position is anticipated to close on Oct 29, 2026. Workplace Type This is a fully onsite position in Old Bridge,NJ. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionDescription: The most prestigious lending institutions trust Zwicker & Associates, P.C. to protect their legal interests nationwide. Zwicker & Associates P.C. is a national creditor rights law firm that emphasizes ethics, compliance, and assertive representation of our clients’ interests, making us the industry leader in debt collection. Founded in 1991, Zwicker represents lenders in various consumer and commercial recovery efforts and litigation. Zwicker is headquartered in Andover, Massachusetts, and has office locations across the United States. Zwicker is presently seeking an Associate Attorney to join our team in Somerset, NJ. We are seeking a candidate with an eagerness to learn, as well as exemplary organizational, written, and verbal communication skills, to join our team. We seek out candidates whose diverse skills, backgrounds, and experiences enable the Zwicker team to collaboratively innovate and excel in performance. We encourage and provide lifelong learning and training opportunities for our team members, with the goal of building a strong foundation and successful future with us. We strive to promote from within, offering excellent career advancement opportunities for high achievers. The base salary range for this position is $85,000-$110,000 per year, plus applicable bonus. Responsibilities of Associate Attorneys include • Communicate effectively and appropriately with team members and outside parties, • Draft, review, and file legal pleadings, motions, discovery, etc., in furtherance of active litigation files, • Review litigation case files and pleadings to determine appropriate action, • Advocate on behalf of the client’s interests at various litigation settings, • Utilize internal proprietary software to properly update and document the status of each account in the assigned inventory, • Analyze and process litigation inventory reports and litigation files, as assigned by the Managing Attorney, to ensure that proper litigation workflow is being performed pursuant to the firm and client expectations, • Comply with all client and firm standard operating procedures, • Ability to travel to various courtrooms within the branch office footprint as required, • Prepare for and represent clients at hearings, mediations, arbitrations, and trials, including case strategy development, drafting pleadings, conducting discovery, and presenting oral arguments, • Negotiate settlements with consumers and their legal representatives to resolve disputes efficiently while protecting client interests, • Evaluate case merits, assess risk exposure, and provide strategic legal recommendations, • Maintain compliance with applicable laws, regulations, and court procedures, • Perform other duties as assignedRequirements:, • Admitted to practice law and in good standing in New York, • Strong organizational and time management skills, • Proficient computer skills in Microsoft Office suite, including Word, Excel, and Outlook, • Excellent verbal and written communication skills, • Highly motivated self-starter, • Eagerness to learn, • Ability to manage and prioritize a large caseload, • Be able to communicate in a common language with (or to) individuals or groups verbally and/or in writing, • Be able to operate a computer, phone, or equivalent device, • Be able to complete a minimum of a 40-hour flexible workweek schedule, • Be able to read and comprehend position-specific documents and correspondence Preferred Qualifications • Minimum of one year of litigation/trial experience, • Working knowledge of civil procedure, • Debt collection experience, • Prior experience in a high-volume environment Physical Qualifications • Be able to lift five pounds or greater, • Be able to sit 90% of the workday at times, • Be able to bend at the waist and be mobile when needed, • Be able to concentrate and use critical thinking Please note that this job description is not intended to be a comprehensive listing of all activities, duties, or responsibilities required of the employee in this position. Duties, responsibilities, and activities are subject to change at any time, with or without notice. Zwicker & Associates, P.C. is committed to providing equal employment opportunities to qualified individuals with disabilities. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. If you wish to seek an accommodation regarding the requirements of this position, please inform Human Resources Management. This is a full-time, full-benefit position. The benefit package includes medical, vision, and dental insurance, long-term disability insurance, life insurance, compensated time off, paid holidays, and 401 (K) with match: no phone calls, no agencies, EOE, drug-free workplace. Please review our Applicant Privacy Notice: http://www.zwickerpc.com/job-applicant-privacy-notice/ Each posted position will be active for at least five (5) business days, during which time all qualified and eligible employees can apply.

Job Description: As an intern, you will gain valuable hands-on public accounting experience by working with a dedicated group of top professionals who will share their wealth of knowledge and experience. The Audit Intern will support the auditing team byassistingwith financial reviews, data analysis, and compliance checks. This internship provides hands-on experience in the field of accounting and auditing, offering exposure to internal controls, financial reporting, and regulatory standards. This internship begins in January and ends in April. Hours are based on location needs of the office ranging from part time to full time. Thekinds ofpeoplewewant totalk tohavemany ofthefollowing: Junior or Senior Accounting Major or Business related, OR MBA Candidate in an Accounting track program PreferredGPA of 3.0 or higher Must be able to work a minimum of 20-40 hoursper week Ability to commute to one of our office locations Excellent interpersonal and computer skills How you'll spend your time: Analyze and review client accounting records and financial statements Evaluate internal control systems, audit risk, materiality, and compliance with auditing standards through inquiry, observation, and review Assistin preparing detailed workpapers supporting audit procedures Perform substantive testing and analytical review procedures Assistwith client engagements and other assigned projects Gain exposure to various industries and business environments Pursuant tothe San Francisco FairChance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. The compensation for this position ranges from $25-38 per hour. Final offer amounts are based on multiple factors such as the specific role, hiring location, as well as the individual's skills, experience, and qualifications. In addition to the base compensation,Withumoffers a competitive benefits package and bonus program (for eligible roles) based on individual and firm performance. Foradditionalinformation on our benefits, visit our website at_. No sponsorship is available for this position. WithumSmith+Brown, PC is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, (including pregnancy), genetic information, marital status, domestic partnership status, familial status, affectional or sexual orientation, gender identity, citizenship status, national origin, disability or handicap, veteran status, weight, height, or any other classification protected by federal, state, or local law.

Job Description Sales Consultant Why Victra: Victra is Verizon's largest premium retailer in the United States. We are seeking Sales Consultants who deliver world-class service to Every Guest. Every Time. From executing Victra's sales process to sharing your product knowledge, you will connect our guests to what matters most. You will be the face of Victra! We offer uncapped earning potential and endless opportunities for advancement. Our values of performance, collaboration, innovation, integrity, and celebration fuel our culture. Join our knowledgeable and dedicated team to connect technology to life in the most trustworthy, fun, and profitable way. What You Will be Doing.. As a full-time Victra Retail Sales Consultant, you'll have the chance to control your career in one of our retail stores. Using your unique talents, passion for technology, and customer service skills, you will have the power to create the ultimate in-store experience. In this role, you will: • Achieve and exceed monthly sales goals., • work alongside peers and store leaders, learning and sharing ideas while serving customers and providing resolutions to issues., • Be passionate guest advocate with the desire to be yourself when connecting and having fun doing it!, • Provide product benefits and solution recommendations through exceptional customer service to deliver what our customers need., • Create personal connections with guests to make tech look simple., • Foster a competitive drive and ability to succeed in a fast-paced sales environment., • Assist with merchandising and operational functions. Why Work at Victra: • Paid Training, • Premium Health, Dental, and Vision Insurance, • Paid Maternity Leave, • 401K Match, • Tuition Reimbursement, • 50% off Verizon Service, • VNation Disaster Relief, • Referral Bonus, • Frequent Contests, • Career Advancement Opportunities, • A comprehensive benefit list can be viewed here. Please note that all benefits are subject to the terms and conditions of the plan document or insurance policy. We are proud our sales consultants earn an average annual salary of $40,000 to $64,000, combining a base hourly rate plus uncapped commission. We provide paid training and a guaranteed ramp-up rate during your first 60 days of employment. Employees accrue paid time off each pay period at a rate of no less than 40 hours per year for their first year and 80 hours per year each year thereafter. Employees in some states, as required by their state's law, will accrue and may roll-over sick time. All sick time required by state or local law will reduce an employee's annual PTO accrual accordingly. From a fun work environment to an inclusive culture to amazing benefits, VNation is all about being part of a team that invests in you. Click here to learn more! This is the opportunity to do something special and join a company revolutionizing the wireless industry. And we 'couldn't do it without someone like you. So, what do you say? 'Isn't it time you explored what could become the career move of a lifetime? We invite you to apply today! What we're looking for... • High school diploma or GED., • One or more years of customer service, preferably in a retail or sales environment., • Willingness to work evenings, weekends, holidays, November through December, and/or during peak vacation periods., • At least 18 years of age, • Demonstrated experience communicating with customers to find solutions., • Legally authorized to work in the United States Physical Requirements • Ability to lift 10 pounds., • Ability to stand for long periods of time. Training Requirements All Sales Consultants must attend and complete a four-day New Hire University (NHU) training program within 30 days of their official start date. This class may include overnight travel at the company's expense. Various online and computer-based training will be required throughout your employment with Victra. After you apply… You will be required to take a pre-hire assessment. It takes only 20 minutes or less to complete. If you’re selected to move forward, one of our recruiters or hiring managers will reach out to tell you more about the role and answer your questions. Equal Employment Opportunity We're proud to be an equal opportunity employer - and celebrate our employees' differences, regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, or Veteran status. al origin, age, disability, or Veteran status.

Job Description Job Description We are looking for motivated and reliable Shift Managers to join our Buffalo Wild Wings GO team! As a Shift Manager, you will play a key role in leading daily operations in a fast-paced, streamlined environment focused on speed, quality, and exceptional guest service. Buffalo Wild Wings GO locations are designed for convenience, with a simplified menu, no alcohol service, and an emphasis on quick, efficient order fulfillment. In this role, you will coach and support Team Members, ensure operational standards are met, and help deliver a consistently great guest experience. Key Responsibilities Team Leadership & Environment • Foster a respectful, positive, and team-oriented work environment, • Communicate shift priorities, goals, and expectations clearly to team members, • Support onboarding and training of new employees, • Provide real-time coaching, recognition, and constructive feedback, • Lead by example in performance, attitude, and work ethic Operational Excellence • Promote a guest-first culture with a focus on speed and accuracy, • Ensure efficient execution of orders in a quick-service setting, • Resolve guest concerns promptly and professionally, • Maintain brand standards, food quality, and cleanliness at all times, • Enforce safety, food safety, and sanitation guidelines in compliance with local and state regulations Performance & Profitability • Support sales goals through strong shift execution and upselling when appropriate, • Assist in managing labor and minimizing waste, • Handle cash management responsibilities, including monitoring over/short during shifts, • Ensure all food is prepared according to brand standards and delivered quickly Skills & Qualifications • Fluent in English, • Previous restaurant, retail, or supervisory experience preferred, • Strong communication and leadership skills, • Basic math, writing, and computer skills, • Ability to work in a fast-paced, high-energy environment, • Must be at least 18 years old (where applicable), • High school diploma or equivalent preferred Core Competencies Guest Focus • Understands and exceeds guest expectations, • Demonstrates urgency and efficiency in service, • Actively seeks ways to improve guest satisfaction Leadership & Accountability • Sets high standards and leads by example, • Motivates team members to meet or exceed goals, • Takes ownership of shift performance Problem Solving & Decision Making • Identifies issues quickly and resolves them effectively, • Makes informed decisions in a fast-paced environment, • Knows when to involve others for support Interpersonal Skills • Builds strong relationships with team members, • Communicates clearly and respectfully, • Demonstrates integrity, honesty, and reliability Why Join Buffalo Wild Wings GO? • Fast-paced, simplified operations (no alcohol, streamlined menu), • Opportunities for growth and leadership development, • Team-focused and energetic work environment, • A chance to be part of a modern, convenience-driven dining experience`

Job Description Overview SP+, a Metropolis company, is an artificial intelligence company for the real world. We use computer vision to enable checkout-free parking experiences. So there’s no fumbling with tickets, machines, apps, or credit cards. You just “drive in and drive out.” We are the largest parking network in America, with over 23,000 employees powering mobility at over 4,000 locations across North America and Europe. Today, we are reinventing parking. Because it’s important, it's everywhere and impacts everyone. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working, and playing remarkable - giving us back our most valuable asset, time. Responsibilities Basic Function - Ensure that appropriate number of cars is kept on location throughout shift, cars are being parked in an appropriate fashion and the lot is kept clean and presentable. • Direct incoming customers to available parking spaces., • Count vehicles on location throughout shift, as needed., • Write and issue violation warnings to tenants and visitors that violate garage policies., • Patrol transient and reserved parking levels on foot or in customized motor carts, if applicable., • Provide assistance to customers that have forgotten where they parked their vehicle., • Responsible for being at work every scheduled day, on time and in uniform., • Courteously assist Customers by answering any questions they may have. If necessary, direct the Customer to the Facility Manager for further assistance., • Control traffic at entrances and exits as needed., • Assist in the maintenance and repair of parking equipment and any general maintenance tasks as directed by the Facility Manager., • Report any known accidents, observed or suspected violations of Company policy, safety hazards or any unusual occurrence to the Facility Manager., • Communicate debris, water, oil spills and etc. to garage office., • Substitute for Valets when necessary, if authorized., • Have a thorough knowledge of all areas of the garage, thorough knowledge of the major streets, landmarks and freeways in the area of the garage., • Assist Facility Manager with other duties as needed. Qualifications Qualification Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience Required: Less than High School education or one month related experience, training or an equivalent combination of education and experience. License Requirement: The individual will only be required to have and maintain a valid state-issued driver’s license, with a current address and acceptable driving record, if the individual is expected to be able to drive a company vehicle or drive on company business. Availability to Work: Special shift requirements, if any, will vary depending on a location's hiring needs. If applicable, availability to work 2nd shift, 3rd shift and/or week-ends may be required. Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one situations to customers and other employees of the company. Mathematical Skills: Ability to add, subtract, two digit numbers and multiply and divide with 10’s and 100’s. Ability to perform these operations using units of American money. Appearance: Employees will be required to maintain a neat and clean appearance and be in complete uniform at all times. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to handle cash and equipment. The employee is occasionally required to sit and climb or balance. The employee must occasionally lift and/or move up to 25 pounds. Salary Range: $18.00 - $18.50 per hour Benefits: Eligible employees will participate in the various benefits plans including medical, dental, vision, flexible spending accounts, long/short term disability, life insurance, accident insurance, 401k, and paid time off. SP+ is an equal opportunity employer committed in policy and practice to recruit, hire, train, and promote, in all job classifications, without regard to race, color, ancestry, religion, sex, age, national origin, citizenship status, marital status, sexual orientation, veteran status, gender identity, disability or other classes protected by federal or state law. SP+ does not tolerate harassment or retaliation against any employee or applicant based on these characteristics or because the individual exercised their EEO rights. Right to Work Poster SP+, a Metropolis Company, may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate’s application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, SP+ retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. If you are an applicant to a New York City job posting and wish to request an alternative selection process accommodation or have questions about our data retention policy, please contact Recruit@spplus.com. We are here to assist you.

Job DescriptionCompany Description The targeted hiring range for this full-time position is $19.00 - $25.00 plus commission depending on qualifications; however, the expanded salary range provides opportunities for advancement. Our salary ranges are determined by role, level, and job location. Within the range, individual pay is determined by factors including job-related skills, competencies, experience, and relevant education, training or a combination of these things plus market demand. Your recruiter can share more about the specific salary range and benefits for your location during the hiring process. Our comprehensive benefits package for full-time employees includes medical, dental, and vision coverage, along with health savings and flexible spending accounts, life and disability insurance, generous paid time off and holidays, a 401(k) match, employee discounts, and valuable well-being benefits like free EAP services, financial planning assistance, and well-being coaching all designed to support your health and financial security. You can find retail jobs just about anywhere. So, why work at Red Wing Shoes? From our purpose-built footwear to our stylishly designed stores, you’ll see the difference. From our life-friendly retail schedules to career advancement, you’ll feel the difference. And, when you create remarkable, in-store experiences for customers who build, shape, and protect the world around them -- you’ll make a difference. We’re not just retail. We are Red Wing. Job Description GENERAL PURPOSE OF JOB: Promote and support our high-quality Red Wing brand image through professional selling, building loyalty and long-lasting relationships with our customers. This is achieved by promoting the Red Wing Shoe Company’s Ultimate Fit Experience (UFE), selling our premium products, and providing conscientious customer service. ESSENTIAL DUTIES and RESPONSIBILITIES: • Guide each customer through RWSC’s Ultimate Fit Experience, • Provide appropriate accessory recommendation, educate customers on the benefits of each, • Generate Industrial Sales Leads, • Achieve and exceed daily productivity and sales goals, • Maintain the integrity of the sales floor presentation, store signage, and housekeeping standards, • Maintain proficiency with product knowledge, technical, and operating standards through continuous learning, • Maintain safe and healthy work environment by following organization standards and legal regulations, • Restoring footwear exchanges from the truck visits and store for resale, • Be the Mobile Sales Representative (MSR) on truck runs, fittings, and onsite service, • Prepare, load, and unload stock to be placed on mobile unit and in warehouse for the day’s business OTHER DUTIES AND RESPONSIBILITIES (following duties are required on all positions): • Obtain necessary information by maintaining knowledge of RWSC’s electronic communication software EVA, • Maintain quality service by establishing, following, and enforcing organization quality system standards, • Uphold Red Wing Shoe Company’s core values, • Willingness to perform additional duties as required, • Conduct self-accordance to RWSC policies, • Build collaborative relationships between you and key people with whom you’ll work or interact withQualifications EDUCATION, EXPERIENCE AND REQUIRED COMPETENCIES: • High School Diploma/GED or equivalent work experience, • 1-2 years relevant experience, • Results oriented, • Effective Written/Verbal Communication, • Computer Utilization is Key, • Valid Driver’s License required, • Ability to pass and stay compliant with DOT requirements, which includes a DOT physical and drug screen, and you must be 21 years old. ADDITIONAL DESIRABLE QUALIFICATION AND COMPETENCIES: • Thorough knowledge of Red Wing Shoe Company’s mission, values, and organization structure, • Profit and loss knowledge, • Naturally curious, has passion for new ideas, and looks to drive growth, • Problem solving, • Retail Footwear PHYSICAL DEMANDS: • Lifting 50 pounds, bending/squatting to lace shoes, overhead lifting, twisting, climbing a ladder, standing for long periods of time, • Housekeeping duties including but not limited to: vacuuming, mopping & waxing floors, washing windows, use of disinfectant chemicals, discarding of all trash, maintaining recycling, installing, and maintaining furniture, fixtures, and displays. WORK ENVIRONMENT: • Retail/Warehouse and Mobile Shoe Truck Additional Information Red Wing Shoes is an Equal Opportunity Employer. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. Individuals with disabilities needing assistance in completing an application may contact rwsc.recruitment@redwingshoes.com or call 651-388-8211-. Please view Equal Employment Opportunity Posters provided by OFCCP at https://www.dol.gov/ofccp/regs/compliance/posters/ofccpost.htm All offers of employment are contingent on satisfactory results of a background check. Red Wing Shoe Company, Inc. is a drug-free workplace. Red Wing Shoe Company will not be using recruitment agencies or firms to fill this position and we will not accept unsolicited resumes or candidate information. No agency calls please. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25 / hr. and $45 / hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. We are a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. Main Duties : Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.) Take care of the product being tested and use it responsibly Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.) Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses) There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm Write reviews as requested in the In-Home Usage Test Daily Schedule for each project Requirements : Ability to follow specific instructions Excellent attention to detail and curious spirit Be able to work 15-25 hours per week and commit to a certain routine Have access to a computer and a reliable internet connection Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. Benefits : Very competitive pay rate Weekly pay Work around your own schedule Learn about an exciting industry Telecommute (you can work from home, work or school) Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25 / hr. and $45 / hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. We are a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. Main Duties : Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.) Take care of the product being tested and use it responsibly Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.) Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses) There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm Write reviews as requested in the In-Home Usage Test Daily Schedule for each project Requirements : Ability to follow specific instructions Excellent attention to detail and curious spirit Be able to work 15-25 hours per week and commit to a certain routine Have access to a computer and a reliable internet connection Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. Benefits : Very competitive pay rate Weekly pay Work around your own schedule Learn about an exciting industry Telecommute (you can work from home, work or school) Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25 / hr. and $45 / hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. We are a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. Main Duties : Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.) Take care of the product being tested and use it responsibly Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.) Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses) There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm Write reviews as requested in the In-Home Usage Test Daily Schedule for each project Requirements : Ability to follow specific instructions Excellent attention to detail and curious spirit Be able to work 15-25 hours per week and commit to a certain routine Have access to a computer and a reliable internet connection Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. Benefits : Very competitive pay rate Weekly pay Work around your own schedule Learn about an exciting industry Telecommute (you can work from home, work or school) Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25 / hr. and $45 / hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. We are a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. Main Duties : Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.) Take care of the product being tested and use it responsibly Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.) Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses) There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm Write reviews as requested in the In-Home Usage Test Daily Schedule for each project Requirements : Ability to follow specific instructions Excellent attention to detail and curious spirit Be able to work 15-25 hours per week and commit to a certain routine Have access to a computer and a reliable internet connection Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. Benefits : Very competitive pay rate Weekly pay Work around your own schedule Learn about an exciting industry Telecommute (you can work from home, work or school) Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Job Description The Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to: · Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery. · Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines. · Verifies material, lubricants, solvents and packaging material are correct. · Produces products that conform to all of the requirements outlined in the job book · Monitors production process during the production run · Performs maintenance activities where applicable · Stops production when product is not in conformance and follows the nonconformance procedure. Product Inspection and Nonconformance Process 40% · Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book. · Completes all necessary documentation. · Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred. · 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · SPC · Blueprint OTHER SKILLS · WIP tracking · Multitasking · Personal Accountability · Problem solving · Spatial dexterity · Manual dexterity · Attention to detail · Organizational skills · Basic computer skills While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job Description DEPARTMENT: PRODUCTION REPORTS TO: DEPARTMENT SUPERVISOR/MANAGER POSITION DESCRIPTION: Machine Operator’s operate equipment in a manufacturing setting. The Machine Operator aligns with manufacturing operations to achieve optimal production efficiency and effectiveness in support of the overall goals and objectives of the department. Machine operators are responsible for always maintaining the highest standard of safety. RESPONSIBILITIES: • Start machinery and adjust machinery when necessary to improve performance, • Operate machinery and equipment according to instructions, • Troubleshoot issues and report maintenance issues, • Perform Quality Inspections, follow reporting and recordkeeping procedures, and report problems to supervisor, • Comply with all safety and health regulations, • Responsible for general housekeeping in and around immediate work area, • Process and packages production to specification of work order, • Develop and follow standardized work instructions to minimize machine downtime, • Follow all safety and food safety guidelines always and take a proactive approach to safe working conditions, • Maintain familiarity with SDS and other regulated material information, requirements, and guidelines., • Assist during shift changes to ensure a smooth transition from crew to crew., • Alert appropriate personnel of production-related issues in an efficient manner. Communicate all important information including but not limited to quality concerns, equipment problems, safety issues, and others., • Other duties as assigned. REQUIRED SKILLS / ATTITUDES: • Preferred High School Diploma or GED, • Preferred machine operating experience in a manufacturing facility, or similar relevant experience, • Ability to follow written and oral instructions, • Ability to understand basic Quality Control methods, • Knowledge of basic hand tools, • Knowledge of the products manufactured in the facility w/ basic computer / scanning technology experience PHYSICAL REQUIRMENTS: While performing the duties, the employee will be required to sit and/or stand, talk or hear, both in person and by telephone; use hands, fingers and arms to feel objects or controls, reach with hands and arms. Prolonged standing/walking periods of 12 hours. May be required to stoop, kneel, bend, crouch and lift to 50 pounds. RESPONSIBILITIES: • Safety Responsibilities:, • Supports a culture where employees address unsafe conditions and behaviors, make suggestions for improvements, and actively participates in implementing solutions, • Identifies safety gaps and self-initiates corrective actions, • Strictly adheres to plant safety, housekeeping, and 5S efforts, • Understands, identifies, and corrects safety hazards, • Drives a culture which empowers employees to understand and embrace what they own, • Food Safety Responsibilities:, • Monitors and verifies activities to ensure that finished goods and raw materials are coming in and out of the facility meet consumer safety and quality standards., • Complies with all company food safety and quality assurance procedures, • Reports any product or process failures that could impact food safety of manufactured products to the location’s Food Safety Team Leader and submits an appropriate incident report About MRP: MRP Solutions (MRP), a plastic cap manufacturer, is a leading provider of high-quality, injection molded plastic closures, jars and packaging components used every day by millions of consumers around the globe. But we offer more than just plastic caps and lids – we deliver industry-leading packaging solutions tailored to each customer’s unique requirements, providing best-in-class product protection while ensuring consumer confidence. MRP Solutions combines extensive packaging expertise with a consultative approach to reliably uncover customer needs. By understanding your business goals, we can tailor smarter, safer, and more flexible packaging solutions that reduce cost and increase speed to market, helping your businesses capitalize on opportunity. By constantly innovating, MRP enables our customers to grow, making us a preferred partner. We are passionate about partnering with distributors and manufacturers who understand that plastic caps and lids are a small but important part of how people experience their brands. Together, we deliver packaging with purpose. Our Vision: We deliver industry-leading packaging solutions tailored to each customer’s unique requirements, providing best-in-class product protection while ensuring consumer confidence. By constantly innovating, MRP enables our customers to grow, making us a preferred partner. Our Values & Beliefs • Integrity – We have the courage to act with the highest level of integrity, even when no one is watching. We do what is right 100% of the time., • Value Creation – The sole reason a company exists is to create real long-term value for society. This starts with ensuring human safety, as value cannot be created without first protecting human life. We seek opportunities for mutual benefit with all of our stakeholders, including customers, employees, shareholders, suppliers, and the communities in which we operate. In everything we do, our overarching goal is to deliver superior results.., • Accountability - We are accountable to each other and to our stakeholders. We say what we do and do what we say. We embrace a culture of ownership, empowering and equipping employees with the ability to own their outcomes., • Entrepreneurial - Everyone thinks and acts like owners, employing good economic and critical thinking skills while adopting the risk profile of our shareholders. We are inquisitive, constantly seeking out opportunities to improve, actively searching for and innovating across each and every aspect of our business. We relentlessly strive to understand and profitably anticipate what our customers need and value, because if our customers do not grow, we do not grow., • Respectful and Friendly – Everyone deserves to be treated with respect and dignity. Because everyone's perspective has value, we embrace diversity of thought, background and experiences. We are friendly and lead with a smile. What we do is important, but how we do it is what makes it impactful., • Change - We actively seek out and embrace change wherever profitable. Because society is constantly identifying and employing new and better ways of accomplishing tasks, we must constantly innovate, reinvent and, ultimately, destroy the old ways of doing business. We actively engage in rigorous debate and embrace challenge to ensure we stay relevant and deliver superior results., • Fulfillment – Our employees are the foundation of our success. We foster an environment enabling our employees to learn, grow and accept more accountability as they demonstrate capability. We promote more than just individual connection as community at work brings people together through common interest, objectives or experiences. MRP Solutions is an equal opportunity and affirmative action employer. We do not discriminate in recruiting, hiring or promotion based on race, color, religion, sex (including sexual orientation, gender identity or expression, transgender status), national origin, age, disability, medical condition, marital or protected veteran status or any other basis or characteristic prohibited by applicable federal, state, or local law. Consistent with the obligations of state and federal law, MRP Solutions will make reasonable accommodation for qualified individuals with disabilities. Any employee who needs reasonable accommodation should contact Human Resources. #INDS

Job Description Our residents hold a special place as cherished members of our extended family. Choosing a dependable team of caregivers, committed to their promises, is a significant and difficult life decision for any family. As a collective, we take pride in being a sanctuary where individuals in our community can discover compassionate support along their health journey. As an Recreation Aide on our team, you will make a meaningful impact on the lives of our extended family. In turn, we are dedicated to ensuring our team of caregivers feel the same compassion provided to the residents. If any part of this message resonates with you, then Complete Care wants to hear from you! Recreation Aide Qualifications & Responsibilities: High School Diploma or Equivalent Previous long-term care experience preferred but not required Must be energetic, creative, empathetic and a team player Implement scheduled programs and assist residents as needed Monitor resident behavior during events and communicate to nursing as needed Maintain and manage activity attendance calendars Assist in preparing and displaying holiday decorations throughout the facility Computer knowledge Other duties as assigned by Director of Activities and Administrator Recreation Aide Schedules & Benefits: Schedule: 9:30-4:30 Monday-Friday! You can choose to get paid every day – no more waiting for payday! Health, dental, vision and PTO for full-time employees Opportunities for advancement Complete Care is an equal opportunity employer. #LI-JG1