Trabajos valve en New York, New YorkCrear alertas

Job Description Title: Junior Apprentice Technician Location: Cedar Knolls, NJ (On-site) Status: Full Time (40 hours), Non-exempt (Entry-Level) Hourly Range: $25.65 Hourly + Overtime Benefits: We offer a competitive salary package, commensurate with experience, Comprehensive Health Benefits (medical, dental, vision), PTO including vacation, sick, and other forms of PTO, Retirement benefits, 457b option, Tuition Reimbursement/paid training, FSA, Life insurance (waiting periods may apply). Job Description Scope: The Junior Apprentice Technician is an entry-level position within the Operations Division, responsible for performing a variety of manual and unskilled duties across the Distribution, Treatment, Fleet Maintenance, and Facility Maintenance sub-divisions. The position is structured as a training role designed to develop foundational skills in the maintenance and repair of distribution systems, treatment and pumping equipment, and related facilities. The position offers successive opportunities for advancement. The position requires the ability to perform work assignments in varying environmental conditions, including extreme temperatures and inclement weather and to respond to scheduled and unscheduled emergency callouts. Must be available for 24/7 standby duties with about approximate 45-minute response time, and work schedules may include non-standards hours such as nights, weekends, and holidays. Possession of New Jersey Commercial Driver’s License (CDL) Class B, with air brake endorsement is required, or must be obtained in accordance with the terms outlined in the position description. Key Responsibilities: • Renders services to provide potable water., • Demonstrated a high level of customer service by Authority standards., • Operate related vehicles and equipment such as snowplows, cranes, vacuum systems, valve operating equipment and tow equipment, trailers, etc., • Use various hand tools., • Use various power tools and equipment., • Load, unload, and lift supplies, equipment, etc., • Clean and sweep streets and sidewalks., • Sort, pile, and clean salvageable brick, stone, lumber, and metal work., • Remove non-poisonous underbrush, foliage, vines, and weeds., • Shovel snow, gravel, sand, and other miscellaneous debris., • Operate snow removal and salting equipment to keep roads, parking lots, driveways, etc. clear and safe., • Assist with the maintenance, inspection, and repair of treatment and pumping/storage equipment, tanks, pumps, processes, industrial controls, and other related treatment and pumping/storage equipment and facilities., • Assist with the operation, maintenance, inspection, and repair of distribution mains, service lines, fire hydrants, valves, valve boxes, curb boxes, pavement, meters, and other related distribution equipment and facilities., • Assist with the maintenance, inspection, and repair of Authority buildings and grounds, such as changing of light bulbs, cleaning, painting, grass cutting, hedge trimming, snow/ice removal, and related assignments., • Basic maintenance, inspection, and repair of Authority vehicles and equipment, such as changing light bulbs, windshield wipers, fluid, and lubrication addition, changing of tires, changing batteries, and related assignments. Performs related and other duties, as assigned., • Perform related duties and responsibilities as required. This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Functions of this position include work assignments in the ambient atmosphere including extreme cold, hot, wet, or other inclement weather conditions. Qualifications: EDUCATION & EXPERIENCE • U.S accredited high school diploma or equivalent., • NJ Basic driver’s license (required), • NJ Commercial Driver’s License, Class B with air brake endorsement (preferred, permit required within 6-month probationary period) SKILLS & COMPETENCIES • Ability to read, write and understand English so that involved and complicated instructions and technical texts can be read and understood, and legible written records can be produced and maintained., • Ability to understand, remember and carry out oral and written directions; to learn quickly from oral and written explanations and demonstrations; to deal knowledgeably and courteously with co-workers, customers, and the general public., • Entry-level experience in the operation, maintenance, and/or repair of motors, pumps, hydrants, valves, or other similar equipment in water, wastewater, or industrial applications and/or related experience such as that obtained by serving in the United States military., • Ability to utilize information technology to perform the functions of this position., • Working harmoniously with co-workers, supervisors, managers, and the public., • Maintain an understanding and satisfactory compliance with the SMCMUA policies, procedures, practices, processes, and essential functions required for the position. WORK HOURS & LOCATION This is an on-site position based at our SMCMUA Headquarters located 19 Saddle Road Knolls, NJ 07927. The schedule is Monday through Friday. Company Description: In 1977, the Governing Bodies of Morristown, Morris Township, Morris Plains, and Hanover Township (the Creating Municipalities) passed parallel ordinances creating The Southeast Morris County Municipal Utilities Authority (SMCMUA). SMCMUA provides high-quality drinking water to customers in Morristown, Morris Township, Morris Plains, and Hanover Township with some service in Mendham Township and Harding Township, and to certain customers and municipalities outside its District in Morris County, New Jersey. On a typical day, about 100,000 people rely on SMCMUA's commitment to high quality for their drinking water needs. Equal Opportunity/Affirmative Action: SMCMUA prohibits discrimination based on the following protected categories: race, creed, color, national origin, nationality, ancestry, age, sex/gender, pregnancy, marital status, civil status, domestic partnership status, familial status, religion, affectional or sexual orientation, gender identity or expression, atypical hereditary cellular or blood trait, genetic information, liability for service in the Armed Forces of the United States, and disability. \nCompany Description In 1977, the Governing Bodies of Morristown, Morris Township, Morris Plains, and Hanover Township (the Creating Municipalities) passed parallel ordinances creating The Southeast Morris County Municipal Utilities Authority (SMCMUA). SMCMUA provides high-quality drinking water to customers in Morristown, Morris Township, Morris Plains, and Hanover Township with some service in Mendham Township and Harding Township, and to certain customers and municipalities outside its District in Morris County, New Jersey. On a typical day, about 100,000 people rely on SMCMUA's commitment to high quality for their drinking water needs. Equal Opportunity/Affirmative Action: SMCMUA prohibits discrimination based on the following protected categories: race, creed, color, national origin, nationality, ancestry, age, sex/gender, pregnancy, marital status, civil status, domestic partnership status, familial status, religion, affectional or sexual orientation, gender identity or expression, atypical hereditary cellular or blood trait, genetic information, liability for service in the Armed Forces of the United States, and disability. In 1977, the Governing Bodies of Morristown, Morris Township, Morris Plains, and Hanover Township (the Creating Municipalities) passed parallel ordinances creating The Southeast Morris County Municipal Utilities Authority (SMCMUA). SMCMUA provides high-quality drinking water to customers in Morristown, Morris Township, Morris Plains, and Hanover Township with some service in Mendham Township and Harding Township, and to certain customers and municipalities outside its District in Morris County, New Jersey. On a typical day, about 100,000 people rely on SMCMUA's commitment to high quality for their drinking water needs.\r\n\r\nEqual Opportunity/Affirmative Action:\r\nSMCMUA prohibits discrimination based on the following protected categories: race, creed, color, national origin, nationality, ancestry, age, sex/gender, pregnancy, marital status, civil status, domestic partnership status, familial status, religion, affectional or sexual orientation, gender identity or expression, atypical hereditary cellular or blood trait, genetic information, liability for service in the Armed Forces of the United States, and disability.

Job Description Title: Water Distribution Operations Supervisor, Daily Operations Location: Cedar Knolls, NJ (On-site) Status: Full Time (40 Hours), Non-Exempt Salary: $85,000 – $95,000 Benefits: We offer a competitive salary package, commensurate with experience, Comprehensive Health Benefits (medical, dental, vision), PTO including vacation, sick, and other forms of PTO, Retirement benefits, 457b option, Tuition Reimbursement/paid training, FSA, Life insurance (waiting periods may apply) Job Description Scope: This Operation Supervisor position applies industry best practices to oversee field staff, coordinate daily work assignments, and support the maintenance activities, managing leak detection and utility markout programs, administering service contracts, maintaining inventory and records, and ensuring compliance with SMCMUA policies and procedures. This position also supports staff training, develops workflows and standard operating procedures, prepares operation reports, and assists with budgeting and contract oversight. The operational oversight, and participation in emergency response activities, including availability to work outside normal business when required. This position performs work under the direction of the New Jersey Department of Environmental Protection (NJDEP) Level 4 Public Water Distribution and Treatment Licensed Operators of Record (LOR). Key Responsibilities: 1. Applies extensive Operations Water Utility best practices, while developing and implementing workflows, procedures, SOPs, and streamlined operations, as the lead for daily operations. Responsibilities include but are not limited to:, 2. Staff scheduling and daily assignments., 3. Main, hydrant, valve, and meter maintenance, repair, and installations., 4. Leak detection., 5. Utility markout program., 6. Conduct staff training on associated inspection and related procedures., 7. Establish accountability metrics and techniques., 8. Demonstrates comprehension, satisfactory compliance, and enforcement of SMCMUA policies, procedures, practices, and processes., 9. Administers daily support, troubleshooting, preventative maintenance, and installation of transmission and distribution system operations., 10. Supervises staff in repair and preventative maintenance type activities and administrative functions., 11. Acquires intermediate-level applied knowledge and develops skills in the repair and preventative maintenance of transmission and distribution system assets (mains, valves, hydrants, meters, etc.)., 12. Responsible for the development and implementation of training materials, SOPs, tracking documents, and accountability reports., 13. Administers service contracts such as those used for main, hydrant, and valve repair and installation, leak detection service contracts, etc.; including contract administration, budget tracking, scheduling of work, and invoice approval., 14. Responsible for the planning, coordinating, proper execution, and supervision of main break repairs., 15. Maintains and orders inventory for transmission and distribution system assets such as pipes, hydrants, valves, meters, testing equipment, etc. including the production of purchase requisitions, tracking expenditures on purchase orders, contract management, etc., 16. Maintains accurate and organized records., 17. Applies the use of information technology and equipment for troubleshooting and problem resolution., 18. Exercises intermediate-level judgment on details of work and in application of standard methods for conventional work., 19. Receives direction on unusual or difficult problems, and general review of all aspects of work., 20. Performs administrative tasks associated with the production of Division reports, compliance reports, records management, etc., 21. Participates in a key position on the Incident Command System Organizational Structure on an as-required basis following SMCMUA’s responses to various types of incidents and acting in accordance with SMCMUA’s All Hazards Incident Response Program., 22. Effectively responds to incidents and exhibits the capability of working outside of normal business hours., 23. Performs related and other duties, as assigned. This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Functions of this position include work assignments in the ambient atmosphere including extreme cold, hot, wet, or other inclement weather conditions. Qualifications: EDUCATION & EXPERIENCE · US-accredited high school diploma or equivalent. Higher level degree or certification, or approved equivalent experience, in an approved field of study such as that obtained from a vocational or trade school, the US military, construction or other industrial fields, engineering technology, management, etc. • Seven (7) or more years in the operation, maintenance, and repair of public water systems, or approved experience in a related field; including two (2) or more years in a supervisory capacity, preferred., • Demonstrate fundamental skill sets in Microsoft Office Excel and Word applications. LICENSES & CERTIFICATIONS • Maintenance of a New Jersey Basic Driver’s License., • New Jersey Department of Environmental Protection (NJDEP) Level 2 Public Water Distribution (W-2) license or demonstrated ability to obtain within an approved time period. SKILLS & COMPETENCIES · Demonstrated proficiency in leadership and supervision. Must be proactive, strategic, and detail-oriented with demonstrated ability to utilize strong interpersonal skills (e.g. tact, diplomacy, cooperation, negotiation, etc.) and perform at a high level of initiative, using good judgment and discretion. · Excellent comprehension, written and oral skills in English so that involved and complicated instructions and technical texts can be read, understood, produced, and communicated to staff. · The person serving in this position is expected to maintain up-to-date skill sets to remain current with the best available technologies. · Displays excellent organizational skills including the ability to plan effectively. · Demonstrated proficiency in: • Personal computing applications such as Microsoft Office, Esri applications, maintenance management applications (i.e., facilities, equipment, grounds, fleet, fuel, etc.), or related applications., • Reading distribution system piping engineering drawings., • Troubleshooting, isolation, and activation of transmission and distribution systems. o Ability to work harmoniously with co-workers, supervisors, managers, and the public. o Travel, including overnight and weekend stays, as needed to attend professional-related seminars, conferences, etc. Travel may be local, regional, or within the Continental US. WORK HOURS & LOCATION This is an on-site position based at our SMCMUA Headquarters located 19 Saddle Road Knolls, NJ 07927. The schedule is Monday through Friday. Company Description: In 1977, the Governing Bodies of Morristown, Morris Township, Morris Plains, and Hanover Township (the Creating Municipalities) passed parallel ordinances creating The Southeast Morris County Municipal Utilities Authority (SMCMUA). SMCMUA provides high-quality drinking water to customers in Morristown, Morris Township, Morris Plains, and Hanover Township with some service in Mendham Township and Harding Township, and to certain customers and municipalities outside its District in Morris County, New Jersey. On a typical day, about 100,000 people rely on SMCMUA's commitment to high quality for their drinking water needs. Equal Opportunity/Affirmative Action: SMCMUA prohibits discrimination based on the following protected categories: race, creed, color, national origin, nationality, ancestry, age, sex/gender, pregnancy, marital status, civil status, domestic partnership status, familial status, religion, affectional or sexual orientation, gender identity or expression, atypical hereditary cellular or blood trait, genetic information, liability for service in the Armed Forces of the United States, and disability. \nCompany Description In 1977, the Governing Bodies of Morristown, Morris Township, Morris Plains, and Hanover Township (the Creating Municipalities) passed parallel ordinances creating The Southeast Morris County Municipal Utilities Authority (SMCMUA). SMCMUA provides high-quality drinking water to customers in Morristown, Morris Township, Morris Plains, and Hanover Township with some service in Mendham Township and Harding Township, and to certain customers and municipalities outside its District in Morris County, New Jersey. On a typical day, about 100,000 people rely on SMCMUA's commitment to high quality for their drinking water needs. Equal Opportunity/Affirmative Action: SMCMUA prohibits discrimination based on the following protected categories: race, creed, color, national origin, nationality, ancestry, age, sex/gender, pregnancy, marital status, civil status, domestic partnership status, familial status, religion, affectional or sexual orientation, gender identity or expression, atypical hereditary cellular or blood trait, genetic information, liability for service in the Armed Forces of the United States, and disability. In 1977, the Governing Bodies of Morristown, Morris Township, Morris Plains, and Hanover Township (the Creating Municipalities) passed parallel ordinances creating The Southeast Morris County Municipal Utilities Authority (SMCMUA). SMCMUA provides high-quality drinking water to customers in Morristown, Morris Township, Morris Plains, and Hanover Township with some service in Mendham Township and Harding Township, and to certain customers and municipalities outside its District in Morris County, New Jersey. On a typical day, about 100,000 people rely on SMCMUA's commitment to high quality for their drinking water needs.\r\n\r\nEqual Opportunity/Affirmative Action:\r\nSMCMUA prohibits discrimination based on the following protected categories: race, creed, color, national origin, nationality, ancestry, age, sex/gender, pregnancy, marital status, civil status, domestic partnership status, familial status, religion, affectional or sexual orientation, gender identity or expression, atypical hereditary cellular or blood trait, genetic information, liability for service in the Armed Forces of the United States, and disability.

Job Title: CNC Programmer / Operator Location: Long Island City, NY Company: Williams Valve Salary: $30 - $40/hr. High Quality Valves Since 1918 Williams Valve is an established valve manufacturer that has produced high-quality industrial valves for more than 100 years. We are seeking an experienced CNC Programmer for our manufacturing facility in Long Island City, NY. Williams Valve is located at 3850 Review Avenue Long Island City, NY 11101. The Mazak CNC Programmer will program, set up, and operate CNC machinery while working closely with our manufacturing and quality teams to ensure components are produced accurately and efficiently. Experience with Mazak machines and programming is required. Williams Valve provides job-specific training, company uniforms, comprehensive benefits, and the opportunity to work alongside experienced professionals who have spent decades in the valve manufacturing industry. Responsibilities • Create, edit, and optimize CNC programs for machined valve components, • Set up and operate CNC lathes and related machining equipment, • Interpret engineering drawings, blueprints, specifications, and tolerances, • Select appropriate tooling, speeds, feeds, and cutting parameters, • Perform tool offsets, compensations, and program adjustments, • Complete first-piece inspections and verify parts meet specifications, • Troubleshoot programming, tooling, and machining issues, • Set up and operate conventional mills and lathes as needed, • Maintain established quality and productivity standards, • Assist with production and machining operations as necessary, • Coordinate routine machine maintenance, • Maintain a clean, organized, and safe work environment, • Follow all company safety and quality procedures Qualifications • Minimum of three years of CNC programming and machining experience, • Experience programming and setting up CNC lathes, • Ability to read and interpret blueprints, engineering drawings, and machining specifications, • Knowledge of tooling, offsets, speeds, feeds, and machining processes, • Experience with conventional mills and lathes, • Mazak machine and programming experience is required, • Okuma machine experience is a plus, • Strong attention to detail and commitment to quality, • Dependable and able to work effectively as part of a manufacturing team, • Knowledge of applicable machine-shop safety procedures, • This position involves access to export-controlled technical data. Employment is subject to the ability to obtain any authorization required under applicable U.S. export-control laws and regulations. Physical Requirements • Ability to lift and move materials weighing up to 25 pounds, • Ability to perform the essential functions of the position, with or without reasonable accommodation Benefits • Health insurance, • Dental and vision insurance, • 401(k), • Paid time off, • Company-provided uniforms, • Union shop – UFCW, • Free Parking Schedule • Monday through Friday, • 7:00 a.m. to 3:30 p.m., • Eight-hour day shift To apply, please email your résumé to hr@williamsvalve.com. Williams Valve is an equal opportunity employer. We do not discriminate against employees or applicants based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, disability, protected veteran status, or any other status protected by applicable law. Job Type: Full-time

VERSA Products Company is a leading manufacturer of pneumatic directional control valves and valve automation solutions serving industrial, OEM, process control, and hazardous location markets worldwide. For over 75 years, VERSA has built its reputation on engineering excellence, innovation, quality, and customer satisfaction. Position Summary This position is ideal for a hands on Electrical and/or Mechanical Engineer responsible for the design, development, testing, and continuous improvement of mechanical and electro-mechanical products for the fluid power and valve automation industry. This role leads engineering projects, prepares technical documentation, collaborates with manufacturing and suppliers, and supports product certification and regulatory compliance. Essential Responsibilities • Drive continuous improvement initiatives for existing product lines to improve performance, manufacturability, reliability, and cost., • Develop engineering concepts, perform technical analyses, prepare test plans, conduct laboratory testing, and document results., • Design complex electro-mechanical and mechanical assemblies using 3D CAD software., • Create, review, and release engineering documentation including:, • 3D models, • Detailed manufacturing drawings, • Bills of Materials (BOMs), • Engineering Change Notices (ECNs), • Test reports, • Technical specifications, • Utilize engineering simulation software to evaluate and optimize product designs., • Collaborate with Manufacturing, Quality, Purchasing, and suppliers to ensure successful product launches and resolve technical issues., • Review supplier components and approve production samples., • Support Manufacturing by troubleshooting technical production issues and implementing engineering solutions., • Manage engineering projects from concept through production while meeting schedule, quality, and cost objectives., • Perform other engineering duties as assigned. Qualifications Required • Bachelor’s Degree in Electrical and/or Mechanical Engineering or related engineering discipline., • Minimum of six (6) years of product design experience in a manufacturing environment., • Minimum of two (2) years of hands-on 3D CAD design experience., • Experience creating mechanical assemblies, detailed drawings, and engineering documentation., • Proficiency with Microsoft Office applications. Preferred • Experience with pneumatic products, valves, fluid power, or industrial automation., • Experience with engineering simulation software such as EFD Flow, Maxwell, or similar analysis tools., • Familiarity with product testing, validation, and regulatory compliance., • Experience supporting ISO 9001 Quality Management Systems., • Project management experience leading engineering projects from concept to production. Knowledge, Skills & Abilities • Strong mechanical aptitude and analytical problem-solving skills., • Ability to manage multiple engineering projects simultaneously., • Excellent written and verbal communication skills., • Ability to work effectively with cross-functional teams., • Strong organizational and documentation skills., • Self-motivated with a continuous improvement mindset., • Ability to work independently while contributing to a collaborative engineering team. Benefits • Medical, dental, and vision coverage, • 401(k) retirement program, • Paid time off, • Tuition reimbursement, • Training and professional-development opportunities There is a reason many people join VERSA and stay for decades! We are a family-oriented organization with opportunities to grow.

Project Manager - Industrial | Final Control For over 90 years, Control Associates has been the premier provider of industrial process automation solutions in the New York tri-state area. As an Emerson Automation Solutions partner, we deliver world-class valve, equipment, services, and integrated solutions to critical industries including Pharmaceutical, Chemical, Power Generation, and Natural Gas Distribution. As we continue to grow, we're seeking an experienced Project Manager to drive the successful execution of complex Final Control projects from order entry through commissioning. Your Role and Impact: As our Project Manager for Industrial Industries, you'll be the driving force behind the scheduling and execution of complex valve, equipment, services, and integrated solutions projects. You'll manage multiple projects across various Emerson business units, coordinate after-sale opportunities, and serve as the critical link between our internal teams, suppliers, and customers. This is a role for a detail-oriented, deadline-driven professional who thrives on delivering results in a fast-paced, collaborative environment. What You'll Lead and Deliver: Project & Practice Management: • Execute complex valve, equipment, services, and integrated solutions orders from receipt of customer purchase order through shipment, startup, and commissioning, • Create and manage internal project schedules, budgets, milestones, and project reviews to meet delivery commitments, • Drive both internal and external supplier/vendor organizations and customers to meet milestone schedule commitments, • Identify resources needed and assign individual responsibilities across project teams, • Manage day-to-day operational aspects of projects and scope, • Minimize risk and exposure through proactive issue identification and resolution, • Ensure project documents are complete, current, and stored appropriately, • Effectively apply QMS/ISO 9000 processes and Control Associates' project methodology and standards Financial Management: • Manage project budgets for materials and labor, • Analyze project profitability, revenue, margins, and utilization, • Accurately forecast revenue, profitability, and cost-to-completion projections, • Follow up with clients regarding outstanding invoices as needed Business Development: • Identify business development and add-on sales opportunities within existing projects, • Lead proposal efforts including project scoping and loss of earnings assessments Client & Stakeholder Management: • Manage day-to-day client interactions and set clear expectations, • Build lasting relationships with client personnel that foster long-term partnerships, • Collaborate with Account Managers, Sales Engineers, Field Services, Service Centers, and Accounting to resolve project requirements and discrepancies, • Facilitate project kick-off meetings, status reviews, and team communications, • Communicate relevant project information effectively to all stakeholders What You'll Bring: Required Qualifications: • Bachelor's degree (Engineering concentration preferred), • 2+ years of experience in a project engineering or project management role within engineering, manufacturing, construction, or equivalent industry, • Strong project scoping, planning, budgeting, and schedule management capabilities, • Excellent written and verbal communication skills for client-facing interactions, • Strong organizational, time management, and follow-through skills, • Mechanical aptitude and technical product knowledge or demonstrated ability to learn technical products and processes, • Proficiency with Microsoft Office Suite, • Experience with Enterprise Resource Planning (ERP) systems strongly preferred, • Experience with MS Project or similar scheduling tools Preferred Qualifications: • Experience with IFS ERP system, • Experience with AutoCAD or similar drafting programs, • Background in valve, instrumentation, or process control industries What Sets You Apart: You're adaptable and thrive when managing competing demands in a dynamic environment. You communicate clearly and keep all stakeholders well-informed. You resolve conflicts with composure and negotiation skills. You take ownership of your projects and hold yourself accountable for outcomes. You build lasting client relationships through responsive, professional service and consistently deliver results on time and within budget. How This Role Embodies Our Core Values: Customer Focus: You'll prioritize client needs by delivering projects on time, within budget, and to the highest quality standards while building lasting customer relationships. Collaboration: You'll achieve superior results by working closely with Account Managers, Sales Engineers, Field Services, suppliers, and customers to drive successful project outcomes. Innovation: You'll identify creative solutions to project challenges and continuously look for opportunities to improve processes and deliver additional value to clients. Integrity: You'll build trust through transparent communication, honest project reporting, and consistent delivery on commitments. Passion: You'll bring enthusiasm, dedication, and strong work ethic to ensuring every project succeeds and every client is satisfied. What We Offer: • Competitive salary commensurate with experience plus bonus potential Base Salary range for this role is $95K-$115K, with a bonus potential • Comprehensive health, dental, and vision insurance, • 401(k) with company match, • Employee Stock Ownership Plan (ESOP) - own a piece of the company, • Generous paid time off including vacation days, holidays, and sick leave, • Professional development and career advancement opportunities, • Collaborative team environment with experienced industry professionals Ready to Drive Project Excellence? If you're a results-driven project management professional who thrives on delivering complex technical projects while building strong client relationships, we want to hear from you! Join Control Associates and apply your project management expertise to solutions that power critical industries. Location: Allendale, NJ | Reports to: Service Proposal Manager | Standard business hours: Monday-Friday, 8 AM-5 PM | Some travel to customer sites required. Work visa sponsorship not available. Direct hire only. Control Associates is an Equal Opportunity Employer committed to diversity in the workplace. Control Associates participates in E-Verify. Click here to view _

Mold Maintenance Technician / Moldmaker Apprentice PTI Tech | Clifton, NJ About the Role Are you mechanically minded, enjoy working with your hands, and like figuring out how things work? Looking to build a long-term career in manufacturing and precision moldmaking? PTI Tech is looking for a dependable, detail-oriented Mold Maintenance Technician who wants to develop their skills and grow into a Mold Maker. You'll start by helping maintain, clean, inspect, and prepare precision plastic injection molds for production. As you gain experience, you'll have the opportunity to learn mold repair, assembly, troubleshooting, and new mold construction alongside experienced moldmakers. This is a hands-on opportunity to learn a specialized trade, develop valuable technical skills, and grow your career. You don't need to be an experienced Mold Maker to be considered, but you should have a strong mechanical aptitude, a willingness to learn, and pride in doing quality work. What You'll Do Mold Maintenance and Preventive Maintenance • Clean, inspect, and maintain precision plastic injection molds., • Safely move, open, and support molds using cranes, hoists, mold carts, and proper safety equipment., • Disassemble and reassemble molds while keeping components organized and accounted for., • Clean mold plates and components using ultrasonic cleaning equipment and other approved methods., • Inspect mold components, including slides, lifters, ejector pins, seals, vents, and cooling circuits, for wear or damage., • Perform routine maintenance, such as replacing approved seals, O-rings, springs, and fittings, cleaning vents and water circuits, and lubricating components., • Complete scheduled preventive maintenance and accurately document work performed, inspection results, and any issues that need follow-up., • Report damage or problems that require more advanced repairs. Mold Changeovers and Production Support • Help prepare molds for production and complete assigned mold changeovers., • Change date and identification pins, swap cavities or inserts, and adjust mold configurations as needed., • Verify that components are installed correctly and molds are properly reassembled before returning them to production., • Work carefully to help minimize setup errors and keep production running smoothly. Learn and Grow Into Moldmaking • Work alongside experienced moldmakers to learn mold assembly, fitting, troubleshooting, and repair., • Develop skills using hand tools, measuring instruments, and toolroom equipment., • Learn mold construction, repair techniques, and basic machining through supervised hands-on training., • Take on more advanced repair and new-tooling assignments as your skills and experience grow. What We're Looking For • At least one year of hands-on experience assembling, maintaining, or repairing mechanical equipment, molds, dies, engines, or similar machinery., • Strong mechanical aptitude and an interest in learning how precision equipment works., • Comfort using hand tools and basic measuring instruments, such as calipers and micrometers., • Ability to follow instructions, drawings, photographs, checklists, and established procedures., • Strong attention to detail when handling small, precision, or easily damaged components., • Good organizational skills and a commitment to keeping tools, parts, and work areas in order., • A safety-first mindset and willingness to ask questions when unsure., • High school diploma or equivalent. You don't need previous moldmaking experience to be considered. Experience in injection molding, a toolroom, industrial maintenance, mechanical assembly, or a technical training program is helpful, but we're most interested in finding someone with the right mechanical skills, work ethic, and desire to learn. Skills That Are a Plus • Experience working with plastic injection molds., • Familiarity with hot runners, valve gates, slides, and lifters., • Experience with ultrasonic cleaning equipment., • Experience operating cranes or hoists and safely handling heavy equipment., • Knowledge of preventive maintenance, rigging, or lockout/tagout procedures. Training will be provided to help you develop the skills needed for the role. What Success Looks Like • Completing scheduled mold maintenance on time and following established procedures., • Keeping accurate maintenance records and reporting problems promptly., • Completing mold changeovers carefully and correctly., • Maintaining a clean, organized, and safe work area., • Building your technical skills and taking on more responsibility as you gain experience. Physical Requirements and Work Environment • Ability to stand and perform hands-on work at assembly benches for extended periods., • Ability to lift up to 50 pounds., • Ability to work safely around heavy molds, lifting equipment, cleaning systems, and approved cleaning chemicals., • Ability to wear required personal protective equipment (PPE) and follow safety procedures. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. Build Your Future in Mold making If you're mechanically inclined, enjoy hands-on work, and want to develop a specialized skill set, this could be the opportunity you've been looking for.

Job Description Anteris® Technologies is a global structural heart company dedicated to revolutionizing cardiac care. With offices in Minneapolis, MN, US; Geneva, Switzerland; and Brisbane and Perth, Australia, we have a growing and inclusive team. Our mission is to forge new frontiers in cardiac care by pioneering science-driven and measurable advancements to restore heart valve patients to healthy function. Transcatheter Aortic Valve Replacement (TAVR) technologies were originally designed for older, high-risk patients. Today, younger, more active patients need a better solution that will not just open and close but restore healthy heart function. We seek to restore healthy blood flow patterns by creating the world's first biomimetic TAVR valve, DurAVR® THV. This cutting-edge valve, incorporating our proprietary ADAPT® anti-calcification technology, is designed to mimic the natural function of a healthy heart valve. We are seeking an experienced TAVR Clinical Specialist to play an integral part in clinical trial support and execution, while also advancing clinical evidence and valve science. In this role, the Clinical Specialist will be responsible for TAVI clinical trial case support and procedural expertise, and they will play an active role in driving trial enrollment and identifying ongoing educational opportunities to heart team members and the referring community. This individual will work closely in collaboration with Clinical Affairs, Regulatory, R&D, Quality and Marketing to ensure optimal clinical outcomes and complete enrollment as aligned with corporate goals and strategy. This role may be filled at varying levels, depending on the candidate's previous experience, and will report to the Sr. Director of Field Operations. This position will require 50-70% travel to support trial-related activities and will start in Q4 of 2026. Preference given to candidates in New England. At Anteris® Technologies, you'll be part of a team dedicated to enhancing the quality of life for patients with aortic stenosis through groundbreaking medical devices. Join us in our mission to revolutionize structural heart solutions. Primary Responsibilities: • Successfully complete internal training program, including competency with CT and echo imaging, internal IFU, best practices, marketing messaging, clinical evidence, and competitive, • Interface with clinical trial sites, demonstrating expertise and key competencies in all technical aspects of TAVI clinical case support, training & education, customer service and communication skills., • Demonstrate competency and expertise in all procedural aspects, including valve loading & preparation and device delivery and implantation according to established best practices, complication mitigation and troubleshooting techniques for DurAVR THV., • Demonstrate proficiency and understanding of all aspects of the approved DurAVR clinical trial protocol, including inclusion & exclusion criteria, and accuracy in obtaining any required imaging and pre & post procedural data., • Demonstrate proficiency in pre-case planning, CT analysis and pre & post procedure recommendations to ensure optimal clinical outcomes., • In-depth knowledge and understanding of existing DurAVR clinical data., • Support the Clinical & Regulatory Operations team, assisting with site communications, data compliance activity, screening review efficiency and site submission efficiency., • Attend clinical cases, supporting the heart team with device prep and loading of the DurAVR valve in each assigned case., • Provision of education and guidance to physicians and site staff in identifying appropriate study patients and assist site in ensuring complete patient screening and enrollment information., • Track all patient pathway screening process activity, routinely providing metrics per site on screening and progress of enrollment., • Identify operational improvement opportunities at the site level and recommend programs for enrollment acceleration, improved efficiency, and appropriate expanded therapy advancement tools and strategies., • Uphold the company AORTIC values: Accountability, Objectivity, Respect, Teamwork, Integrity, and Courage. Required Skills, Knowledge, Experience & Qualifications: • Bachelor of Science in health sciences, nursing, or life sciences., • A minimum of three years of medical device support and experience working in the sterile environment of a cath lab or operating room required., • YOU MUST HAVE 2+ years' Structural Heart TAVR procedural / device implant experience. Clinical expertise, specifically in interventional cardiology and TAVI Structural Heart, are required in order to be considered., • Ability to travel 50-70% of the time, as needed. Preferred Skills, Knowledge, Experience & Qualifications: • Outstanding communication, organizational skills, and ability to initiate and manage communication with physicians, research personnel, and internal colleagues., • Ability to identify and adapt to shifting priorities and competing demands., • Demonstrates creative resourcefulness, strong problem-solving and decision-making skills., • Independent, self-directed, and confident in leading trainings, providing clinical recommendations and leadership in case support., • Excellent interpersonal skills, interfacing with multiple constituencies including interventional cardiologists, cath lab staff and site support staff and colleagues., • Entrepreneurial spirit with a competitive drive and strong work ethic geared toward success. Compensation Target base salary range: $145,000 – $200,000, plus eligibility for an annual short-term incentive (STI) targeted at 15% of base salary and equity participation. Final compensation will be determined based on experience and alignment with role requirements. Unfortunately, we are unable to sponsor work visas (OPT, H1B, etc.) at this time. What We Offer: • Opportunity to make a significant impact on the healthcare industry by advancing groundbreaking therapies., • Collaborative and dynamic work environment with a culture of innovation and excellence., • Competitive compensation package, including salary, performance-based bonuses, and stock options., • Career development opportunities and a chance to be part of a growing company that values its employees. Health and Wellness Offerings: • Medical, Dental, and Vision Offerings, • Flexible Spending Account (FSA), • 401k + Company Match, • Life, AD&D, Short Term and Long-Term Disability Insurance, • Bonus Plan Eligibility, • Employee Equity Program, • Paid Holidays & Vacation, • Employee Assistance Program, • Inclusive Team Environment Note: We may require proof of COVID-19 vaccination to comply with health institutions, state, local municipality, and/or travel regulations. Anteris Technologies recruits, employs, trains, compensates, and promotes regardless of race, religion, color, national origin, sex, disability, age, veteran status, and other protected status as required by applicable law. We have a clear vision: to be a place of belonging for all humans by promoting diversity, multiculturism and inclusion, as a goal and reflection across the organization. Diversity is more than a commitment - it is part of our mission to deliver the best structural heart products on a global scale.

Job Description Regional Sales Manager - Northeast Ready to change the future, your way? This is an excellent opportunity for a driven Regional Sales Manager to unlock your ambition and work the future at Aalberts. As a full-time Regional Sales Manager (Northeast) in the Sales Department at Aalberts, you will be report directly to the Senior Director of Sales. The Regional Sales Manager will actively establish the strategic direction for Wholesale Distribution and Contractor Partners in an effort to gain market share. This role will create annual strategic business plans, develop regional project tracking logs, and build strong relationships with engineers, contractors, owners, and distributors. The role will manage the business for long term year over year growth. the Aalberts way Aalberts is built on entrepreneurship. We believe the more space people are given, the greater their chance of finding brilliant solutions for our customers. That is why we encourage everyone to take ownership, think independently yet work as one team. You are in charge today of what happens tomorrow. For yourself, for the company, and for our planet. your challenge • Pursue contractors, engineers, owners, distributors & facility engineering and develop long-term relationships., • Develop annual, quarterly, and monthly sales plans for a clear strategy to execute in the markets of responsibility., • Attend industry meetings, events and key trade shows., • Must have the ability to present products to engineers, owners, and contractors via PowerPoint and/or through a detailed conversation., • Mechanically inclined and understands various valves and piping systems to discuss applications and recommend products. A willingness to learn and develop product knowledge and understand competitive products., • Understanding the market and market trends to report to management., • Be able to create annual strategic business plans., • Develop regional project tracking logs., • Willingness to travel daily and some overnights to manage the assigned geography., • Enter into Salesforce.com for the regional market for tracking for projects, contractors, engineers and contact names in the commercial areas., • Work effectively and collaboratively with others in the sales organization to ensure strong overall territory growth by identifying ways to capture additional revenue opportunities through strategic management of existing client base and identification of new client opportunities., • Willingness to travel up to 75% of the time., • Complete additional duties as assigned by your manager. requirements • Bachelor’s or Master’s Degree in business, marketing, or sales preferred., • Prior outside sales experience with prior business development responsibilities and consultative selling understanding., • Knowledge of valve and piping systems, product applications, specifications, automation systems, industrial manufacturing, mechanical/plumbing contractors, and PVF distribution., • Strong organizational background and mechanical aptitude., • Ability to manage large territories., • Strong prioritization, planning, and reporting skills., • Self-starter with the ability to work constructively in a fast-paced, multi-tasking environment. targeted attributes • Possesses experience in sales of Mechanical Joining Solutions., • Possesses knowledge of sales channels – distribution, contractor, end-user, specifying engineers, etc., • Possesses knowledge of competitors’ products., • Highly developed professional sales and self-management skills., • Strong networking skills and ability to cultivate new and existing relationships., • Strong track record of forming customer relationships, resulting in long-term productive business relationships., • Strong collaborative approach to business and ability to work cross-functionally to accomplish organizational objectives., • Proven experience in design management., • Ability to read plans and specifications, targeting essential improvements., • Past success where it was consistently required to present to large and small group audiences, providing information and instruction in an energizing and persuasive manner., • Critical thinking and problem-solving skills., • Excellent written and verbal communication skills. why work at Aalberts? • Globally renowned company, dedicated to technological innovation and excellence, • Diverse teams of passionate individuals, committed to making a difference, • Professional growth and development opportunities, • Think independently yet work as one team, • Be in charge today of what happens tomorrow about Aalberts We are a company of over 13,000 passionate people spread across 50 countries, working as one to engineer mission-critical technologies, making impact in everyday life. Aalberts IPSA proudly supports eco-friendly buildings to high-tech manufacturing, minuscule microchips to the largest seagoing vessels, and next gen vehicles to lightweight airplanes. Since 1975, we have been at the forefront of where technological innovation truly matters and progress is really made for a clean, smart and responsible future. work environment • Operate standard office equipment such as computers, phones, and printers., • Communicate verbally and in writing to exchange information with colleagues, customers, and clients.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: We are seeking a Principal Magnet Cryogenics Engineer with over 10-15 years of industry experience to lead the complete program lifecycle—from concept through commissioning—of large-scale cabled High-Temperature Superconducting (HTS) magnet systems for next-generation fusion reactors. In this role, you will hold end-to-end technical ownership for the cryogenic design, thermal-hydraulic modelling, forced-flow cooling distribution, and cryogenic integration of large-scale CICC (Cable-in-Conduit Conductor) or advanced stacked-tape HTS magnets. You will bridge megawatt scale cryogenic plant engineering with microscopic thermal-hydraulic magnet behaviour, leading multi-disciplinary teams through multi-million-dollar hardware deliverables. Key Responsibilities: • Program Lifecycle Ownership: Lead the complete lifecycle (Conceptual, Preliminary, Detailed Design, Qualification, Fabrication, Assembly, Commissioning, and Decommissioning) for large-scale HTS fusion magnet cryogenic systems., • Cryo-Thermal System Architecture: Design, model, and validategaseous helium (gHe), or sub-cooled liquid nitrogen (sLN2) thermal management systems tailored to high-field HTS cabled conductors (stacked HTS conductors)., • Thermal-Hydraulic Modeling: Perform dynamic thermal-hydraulic analysis, transient load modelling (nuclear heating, AC losses, eddy currents, ramp rates), and margin calculations under operational and fault conditions., • Quench & Fault Management: Own the cryogenic response strategy during quench events, including rapid helium expansion, overpressure relief sizing, burst disc integration, and thermo-mechanical stress containment., • Large-Scale Infrastructure & Plant Integration: Define requirements for mega-watt class cryogenic plants, cold compressors, heat exchangers, sub-coolers, helium distribution boxes (valve boxes), and low-heat-leak transfer lines., • Joints & Current Leads: Oversee cryogenic thermal management for high-current demountable or permanent HTS joints and conduction-cooled hybrid (HTS/LTS) gas-cooled current leads (60+ kA)., • Vendor & Subcontractor Governance: Manage major sub-contracts for large-scale cryogenic infrastructure, conductor fabrication, pressure vessels, and vacuum insulated systems (cryostats)., • V&V and Commissioning: Plan and execute full-scale cryogenic and high-current magnet test campaigns, leading cool-down, steady-state operation, quench mitigation, and warm-up procedures.Required Experience:, • 10-15+ Years of Direct Experience in cryogenic engineering and thermal-hydraulic design for superconducting magnet systems, with a primary focus on HTS tape/cable architectures (REBCO/BSCCO)., • Large-Scale Fusion/Physics Program Delivery: Proven track record of ownership over large-scale (> $10M+) magnet work packages within fusion energy programs (e.g., W7x, ITER, JT60SA, KSTAR, DEMO) or major scientific facilities (e.g., CERN, FERMILAB)., • Cabled HTS Architecture: Demonstrated expertise in high-current (tens of kA) cabled HTS configurations (e.g., Cable-in-Conduit Conductors, stacked tape conductors) and forced-flow cooling strategies., • Full Lifecycle Track Record: Experience taking at least one major superconducting magnet or cryogenic system from initial concept through initial cool-down and operational validation., • Regulatory & Code Compliance: Deep familiarity with pressure vessel standards applied to cryogenic temperatures (ASME BPVC Section VIII, EN 13445, B31.3) and cryogenic safety standards (ISO 21010/CGA).Technical Knowledge, • HTS Material Physics: Solid understanding of critical surfaces for REBCO coated conductors, strain sensitivity, thermal margin assessment, and current sharing regimes., • Cryogenic Fluids & Thermophysical Properties: Mastery of low-temperature fluid dynamics (gHe, sLN2) using database tools., • Transient Thermal Analysis: Deep domain knowledge of AC losses (coupling, hysteresis, flux creep) nuclear volumetric heating, heat-leak budgets, and conduction/radiation thermal shielding (MLI design)., • Instrumentation & Controls: Extensive knowledge of low-temperature thermometry (Cernox, TVO, optical fibers/FBG), cryogenic flow meters, pressure transducers, and cryogenic valve telemetry.Skills & Competencies, • Computational Tools: Proficiency in finite element analysis (FEA) and thermal-hydraulic system modeling tools (e.g., COMSOL Multiphysics, ANSYS Thermal/CFD, MATLAB/Simulink)., • System Engineering & Requirements Flowdown: Capability to write clear system requirement documents (SRDs), interface control documents (ICDs), and lead major design reviews (CoDR, PDR, CDR)., • Leadership & Team Mentorship: Demonstrated ability to lead cross-functional engineering teams (structural, electrical, vacuum, systems) and mentor junior magnet/cryogenic engineers., • Strategic Risk Mitigation: Mastery of FMEA, applied to cryogenic system failures, vacuum loss (loss of vacuum/L VAC), and runaway quench scenarios.Company Benefits:, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTO It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Responsibilities will include proper operation of equipment, component level & final cleaning of assemblies. Some assembly work will take place when required. Following is a summary of the essential functions for this job. Other duties may be performed, both major and minor, which are not mentioned below. Specific activities may change from time to time. Trained to perform cleaning, cleanliness verification, and packaging per: • S308, • S311-4 / -5 / -6 / -8, • Approved Valve-specific Engineering drawing and:, • Cleaning Procedures (CPs), • Test Procedures (TPs), • Test Reports (TRs), • Qualification Procedures (QPs), • Others as required Performs: • Pre-cleaning / bulk cleaning using pre-cleaning equipment and established methods, • Gowning / de-gowning for an ISO Class 5 cleanroom, • Precision cleaning of piece parts, kits, and assemblies, • Cleanliness verification for contamination (FOD), damage, and defects utilizing:, • Evident CIX100 Particle Counting Microscopes, • White light visual verification, • Ultraviolet visual verification, • Total Solids Analysis, • Non-volatile Residue Analysis, • Manual microscopes and video scopes, • Packaging cleaned hardware per process or hardware-specific instructions, • Maintenance checklists to monitor and maintain, • Clean environment and equipment, • Stocks of consumables (solvents, bagging plastic, gowning items, etc.), • Functional testing of electrical and pneumatic valve systems as required, • Training of new technicians and providing feedback to engineering teams for continuous improvement of documents, procedures, tooling, and methods. Salary Range:$27.00 To $35.00 Hourly Valcor Engineering Corporation is looking for individuals who are highly skilled, diligent, practical, productive, reliable, inventive, self-motivated, patient, conscientious, problem solvers, organized, cooperative, flexible and positive. Character and attitude are extremely important. All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. \nCompany Description Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries. Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description We are seeking a Pump Mechanic for assignment in Hoboken, New Jersey. The selected candidate will perform preventive and corrective maintenance on 2 wastewater treatment plants and associated pump stations. Hours are Monday - Friday, 6:30am - 3:00pm This position requires Welding experience This position has a rotating on-call schedule Responsibilities • Lubricate equipment and check for malfunctions, • Replace packing in pumps or valves, • Replace bearings in motors, pumps and other equipment, • Tune engines, set valve clearance, clean and adjust regulators, • Examine equipment failures to identify cause and to prevent recurrences, • Install and set up new equipment, • Lean out pipes and perform other plumbing and pipe fitting tasks as required, • May use gas and/or arc welding equipment to heat, cut, braze or weld, • Assist in keeping maintenance records, • Perform other duties as required Qualifications • High School Diploma or GED, • A valid Drivers License, • 1+ years of mechanical experience working on pumps, motors, engines and other equipment, • Welding experience is required, • Proficient in the use of Computerized Maintenance Management Systems (CMMS) PandoLogic. Keywords: Water Pump Mechanic, Location: Hoboken, NJ - 07030 , PL: 604733371

Job Description Responsibilities will include proper operation of equipment, component level & final cleaning of assemblies. Some assembly work will take place when required. Following is a summary of the essential functions for this job. Other duties may be performed, both major and minor, which are not mentioned below. Specific activities may change from time to time. Trained to perform cleaning, cleanliness verification, and packaging per: • S308, • S311-4 / -5 / -6 / -8, • Approved Valve-specific Engineering drawing and:, • Cleaning Procedures (CPs), • Test Procedures (TPs), • Test Reports (TRs), • Qualification Procedures (QPs), • Others as required Performs: • Pre-cleaning / bulk cleaning using pre-cleaning equipment and established methods, • Gowning / de-gowning for an ISO Class 5 cleanroom, • Precision cleaning of piece parts, kits, and assemblies, • Cleanliness verification for contamination (FOD), damage, and defects utilizing:, • Evident CIX100 Particle Counting Microscopes, • White light visual verification, • Ultraviolet visual verification, • Total Solids Analysis, • Non-volatile Residue Analysis, • Manual microscopes and video scopes, • Packaging cleaned hardware per process or hardware-specific instructions, • Maintenance checklists to monitor and maintain, • Clean environment and equipment, • Stocks of consumables (solvents, bagging plastic, gowning items, etc.), • Functional testing of electrical and pneumatic valve systems as required, • Training of new technicians and providing feedback to engineering teams for continuous improvement of documents, procedures, tooling, and methods. Salary Range:$22.00 To $30.00 Hourly Valcor Engineering Corporation is looking for individuals who are highly skilled, diligent, practical, productive, reliable, inventive, self-motivated, patient, conscientious, problem solvers, organized, cooperative, flexible and positive. Character and attitude are extremely important. All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. \nCompany Description Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries. Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

About Us We are a leading manufacturer of pneumatic control valves, serving diverse industries including energy, manufacturing, mining, mobile/aerospace, and utilities. Our products play a crucial role in enhancing operational efficiency and reliability across these sectors. Job Summary We're seeking skilled mechanical assemblers to join our Assembly department. If you have a passion for working with your hands, an eye for detail, and enjoy being part of a team that creates high-quality products, we want to hear from you! Key Responsibilities • Assemble pneumatic control valves using a variety of tools, including pneumatic drivers, torque wrenches, and other hand tools, • Follow assembly instructions and blueprints to ensure product quality and consistency, • Conduct functional tests on completed units, • Troubleshoot assembly performance issues, • Maintain a clean and organized work area, • Crosstrain on different product lines as needed, • Collaborate effectively with team members Requirements: • High school diploma or equivalent, • At least 1 year of experience in mechanical assembly or related field, • Proficiency with hand tools and pneumatic tools, • Basic computer skills, • Strong attention to detail and ability to follow precise instructions, • Excellent communication skills in English, • Ability to lift 50 pounds Preferred Experience • Background in mechanical assembly, particularly with precision components, • Familiarity with pneumatic systems, • Experience in industries such as manufacturing, energy, or utilities, • Knowledge of quality control processes Note: While our focus is on pneumatic control valve assembly, we recognize that experience from related fields such as automotive technology may be valuable due to similarities in tool usage, mechanical processes, and attention to detail. We encourage applicants with diverse mechanical backgrounds to apply. Benefits: • 401(k), • Dental insurance, • Health insurance, • Tuition reimbursement, • Vision insurance Schedule: • Full-time, • 8 hour shift, • Monday to Friday There is a reason many people join VERSA and stay for decades! For over 75 years, we have remained a family-oriented organization with opportunities for growth.

About Us We are a leading manufacturer of pneumatic control valves, serving diverse industries including energy, manufacturing, mining, mobile/aerospace, and utilities. Our products play a crucial role in enhancing operational efficiency and reliability across these sectors. Job Summary We're seeking skilled mechanical assemblers to join our Assembly department. If you have a passion for working with your hands, an eye for detail, and enjoy being part of a team that creates high-quality products, we want to hear from you! Key Responsibilities • Assemble pneumatic control valves using a variety of tools, including pneumatic drivers, torque wrenches, and other hand tools, • Follow assembly instructions and blueprints to ensure product quality and consistency, • Conduct functional tests on completed units, • Troubleshoot assembly performance issues, • Maintain a clean and organized work area, • Crosstrain on different product lines as needed, • Collaborate effectively with team members Requirements: • High school diploma or equivalent, • At least 1 year of experience in mechanical assembly or related field, • Proficiency with hand tools and pneumatic tools, • Basic computer skills, • Strong attention to detail and ability to follow precise instructions, • Excellent communication skills in English, • Ability to lift 50 pounds Preferred Experience • Background in mechanical assembly, particularly with precision components, • Familiarity with pneumatic systems, • Experience in industries such as manufacturing, energy, or utilities, • Knowledge of quality control processes Note: While our focus is on pneumatic control valve assembly, we recognize that experience from related fields such as automotive technology may be valuable due to similarities in tool usage, mechanical processes, and attention to detail. We encourage applicants with diverse mechanical backgrounds to apply. Benefits: • 401(k), • Dental insurance, • Health insurance, • Tuition reimbursement, • Vision insurance Schedule: • Full-time, • 8 hour shift, • Monday to Friday There is a reason many people join VERSA and stay for decades! For over 75 years, we have remained a family-oriented organization with opportunities for growth.

VERSA Products Company is a leading manufacturer of pneumatic directional control valves and valve automation solutions serving industrial, OEM, process control, and hazardous location markets worldwide. For over 75 years, VERSA has built its reputation on engineering excellence, innovation, quality, and customer satisfaction. \n \n Position Summary \n This position is ideal for a hands on Electrical and/or Mechanical Engineer responsible for the design, development, testing, and continuous improvement of mechanical and electro-mechanical products for the fluid power and valve automation industry. This role leads engineering projects, prepares technical documentation, collaborates with manufacturing and suppliers, and supports product certification and regulatory compliance. \n \n Essential Responsibilities \n • Drive continuous improvement initiatives for existing product lines to improve performance, manufacturability, reliability, and cost. \n • Develop engineering concepts, perform technical analyses, prepare test plans, conduct laboratory testing, and document results. \n • Design complex electro-mechanical and mechanical assemblies using 3D CAD software. \n • Create, review, and release engineering documentation including: \n\n • 3D models\n, • Detailed manufacturing drawings\n, • Bills of Materials (BOMs)\n, • Engineering Change Notices (ECNs)\n, • Test reports\n, • Technical specifications\n\n, • Utilize engineering simulation software to evaluate and optimize product designs. \n • Collaborate with Manufacturing, Quality, Purchasing, and suppliers to ensure successful product launches and resolve technical issues. \n • Review supplier components and approve production samples. \n • Support Manufacturing by troubleshooting technical production issues and implementing engineering solutions. \n • Manage engineering projects from concept through production while meeting schedule, quality, and cost objectives. \n • Perform other engineering duties as assigned. \n \n Qualifications \n Required \n • Bachelor’s Degree in Electrical and/or Mechanical Engineering or related engineering discipline. \n • Minimum of six (6) years of product design experience in a manufacturing environment. \n • Minimum of two (2) years of hands-on 3D CAD design experience. \n • Experience creating mechanical assemblies, detailed drawings, and engineering documentation. \n • Proficiency with Microsoft Office applications. \n \n Preferred \n • Experience with pneumatic products, valves, fluid power, or industrial automation. \n • Experience with engineering simulation software such as EFD Flow, Maxwell, or similar analysis tools. \n • Familiarity with product testing, validation, and regulatory compliance. \n • Experience supporting ISO 9001 Quality Management Systems. \n • Project management experience leading engineering projects from concept to production. \n \n Knowledge, Skills & Abilities \n • Strong mechanical aptitude and analytical problem-solving skills. \n • Ability to manage multiple engineering projects simultaneously. \n • Excellent written and verbal communication skills. \n • Ability to work effectively with cross-functional teams. \n • Strong organizational and documentation skills. \n • Self-motivated with a continuous improvement mindset. \n • Ability to work independently while contributing to a collaborative engineering team. \n \n Benefits \n • Medical, dental, and vision coverage \n • 401(k) retirement program \n • Paid time off \n • Tuition reimbursement \n • Training and professional-development opportunities \n \n There is a reason many people join VERSA and stay for decades! We are a family-oriented organization with opportunities to grow. \n \n \n

About Us We are a leading manufacturer of pneumatic control valves, serving diverse industries including energy, manufacturing, mining, mobile/aerospace, and utilities. Our products play a crucial role in enhancing operational efficiency and reliability across these sectors. Job Summary We're seeking skilled mechanical assemblers to join our Assembly department. If you have a passion for working with your hands, an eye for detail, and enjoy being part of a team that creates high-quality products, we want to hear from you! Key Responsibilities • Assemble pneumatic control valves using a variety of tools, including pneumatic drivers, torque wrenches, and other hand tools, • Follow assembly instructions and blueprints to ensure product quality and consistency, • Conduct functional tests on completed units, • Troubleshoot assembly performance issues, • Maintain a clean and organized work area, • Crosstrain on different product lines as needed, • Collaborate effectively with team members Requirements: • High school diploma or equivalent, • At least 1 year of experience in mechanical assembly or related field, • Proficiency with hand tools and pneumatic tools, • Basic computer skills, • Strong attention to detail and ability to follow precise instructions, • Excellent communication skills in English, • Ability to lift 50 pounds Preferred Experience • Background in mechanical assembly, particularly with precision components, • Familiarity with pneumatic systems, • Experience in industries such as manufacturing, energy, or utilities, • Knowledge of quality control processes Note: While our focus is on pneumatic control valve assembly, we recognize that experience from related fields such as automotive technology may be valuable due to similarities in tool usage, mechanical processes, and attention to detail. We encourage applicants with diverse mechanical backgrounds to apply. Benefits: • 401(k), • Dental insurance, • Health insurance, • Tuition reimbursement, • Vision insurance Schedule: • Full-time, • 8 hour shift, • Monday to Friday There is a reason many people join VERSA and stay for decades! For over 75 years, we have remained a family-oriented organization with opportunities for growth.

Job DescriptionCompany Description The Oskaloosa plants include iron and brass foundries, a machine shop, assembly, finished goods warehousing, shipping and administrative offices. We are proud to continue our history of offering manufactured products that comply with “Made in the USA” requirements. Job Description Purpose: The remote Field Sales Engineer (FSE) is responsible for the iHydrant™ and water distribution sales assistance, deployment assistance, and product training. The remote FSE supports the sales effort by assisting in product demonstrations for customers, participating in trade shows, conferences and webinars, pro-actively monitoring and addressing field issues. This job, while a remote position, requires working collaboratively with other members of the valve and hydrant teams, including product managers, engineering, and sales to ensure overall project success. Core Functions of Position: Identifying and participating in sales opportunities for iHydrant™ Manage regional project deployment for utility customers on iHydrant™ system Work with Sales team to influence hydrant specifications around the iHydrant™ product Work with Engineering companies and utility engineers to help define hydrant specifications Maintaining daily communications with customers to ensure resolution and proper follow-up Utilizing the escalation process to resolve customer service issues Escalate issues to cross-functional teams in a timely manner to ensure implementation issues are addressed early Be the subject matter expert on new product functionality to ensure successful onboarding and training of new features for clients Interact with clients to understand their business needs, communicate project status/expectations, and develop relationships to ensure satisfaction while minimizing project risk Communicate feature requests effectively to Product Management to improve product The ability to lift and carry a toolbox that can weigh up to 50 lbs. Other duties and special projects as assigned. Qualifications Technical Skills: Travel estimates of 75% required, and position is remote. Valid driver’s license and good driving record is required. Education & Experience: Bachelor’s Degree in Engineering, a related field or equivalent experience is required. Demonstrated mechanical ability, previous hydrant experience is a plus. Additional Information All your information will be kept confidential according to EEO guidelines. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. McWane is a Federal VEVRAA contractor, and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices. McWane will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation, disability, veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA- gender identity or expression, and genetic information) or any other category protected by federal, state or local law.

Job Description JOB DESCRIPTION JOB TITLE: Maintenance Mechanic Engineer DEPARTMENT: Engineering REPORTS TO: Director of Engineering QUALIFICATION REQUIREMENTS: 1. Reading, writing and oral proficiency in the English language., 2. Four (4) years technical training and field experience as a mechanic., 3. Some background with laundry, HVAC and Kitchen Equipment. JOB FUNCTIONS: The ability to follow proper payroll and uniform procedures. The ability to provide service and repairs as outlined in the Technical Skills List, depending on grade level, for electrical, plumbing, steam, gas, fire & safety, HVAC, refrigeration, interior, paint and decorating problems. The ability to lubricate machinery on a regular basis. The ability to provide machinist work to all equipment such as replacing and repairing bearings, gears, belts, shafts, control mechanism, etc. The ability to always conduct oneself in a professional manner reflects the high standards of The Pierre, a Taj Hotel. The ability to ensure a clean, neat and organized work area. The ability to maintain a good working relationship with other employees. The ability to handle and report any accident immediately, no matter how minor. The ability to respond properly in any hotel emergency or safety situation. The ability to perform other tasks or projects assigned by hotel management and staff. The ability to maintain and re-lamp all lamps in the hotel, including socket repair and replacement. The ability to install electrical wiring for renovations, electrical outlet additions, motors and associated equipment. The ability to provide preventive maintenance of all electrical equipment and updating of appropriate logs. The ability to clean all stations in Engineering and maintain a neat and organized department. The ability to adjust and clean televisions. The ability to respond to all guest complaints regarding the maintenance of their room or public areas in a timely manner. The ability to perform preventive maintenance in guest rooms and public areas. The ability to assist on all plumbing stoppages in the building. The ability to repair an assortment of items brought to the shop by other departments. The ability to clean grease traps, filters and drains as necessary. The ability to assemble desks, shelving, cabinets, etc. assigned. The ability to assist engineers on major shutdowns for repairs. The ability to assist guests with special requests such as opening luggage when keys are lost. The ability to maintain logs for all work performed while on duty. The ability to install or relocate any addition or existing equipment when necessary. The ability to treat urinals with de-liming solution. The ability to take meter readings, record temperatures and pressures in heating and cooling plant. The ability to check all mechanical rooms. The ability to clean gas burners and charcoal burners. The ability to clean fixtures and shades. The ability to unplug toilets and change out valves and valve seats. The ability to respond to work orders or room inspection reports submitted by Department Heads. The ability to respond to all emergency conditions such as fires, power failures, etc. The ability to maintain a good working relationship with other employees, providing instruction and encouragement as needed. The ability to ensure a clean, neat and organized work area. The ability to handle and report any accident immediately, no matter how minor. The ability to respond properly in any hotel emergency or safety situation. The ability to perform other tasks or projects assigned by hotel management and staff. PHYSICAL, COGNITIVE, SOCIAL AND ENVIRONMENTAL REQUIREMENTS: NOTE: All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. PHYSICAL DEMANDS ANALYSIS: Positions: • Engineers must have excellent flexibility for moving in and out of all positions -sitting -standing, walking -squatting -stair climbing is absolutely essential -ladder climbing is absolutely essential -leaning on ladder while overhead reaching -kneeling, half-kneeling, hands/knees -side sitting, long-sitting -belly crawling, crawling through holes and small openings -crawling over and under pipes -supine -overhead, forward, and lateral reach -midline crossing -hook grip, spherical grip, and prehension -lifting floor to overhead -carrying -pushing/pulling Forces: Tool belts: 15 lbs. Bags of rock salt: 50 lbs. Televisions: 45 lbs. Chemical drums: 100 lbs. Motors: 5 lbs. to 120 lbs. Lint bag: 15 lbs. 1/2 lb. to 30 lb. force required to turn various types of valves in the boiler room Other items unweighted: • ladders, • tools, • pipe Repetitions: • Tool belts are worn for a full shift., • 50 lb. bags of rock salt are carried by one person upstairs 5 x shift every day for a week at a time. Total: 98 bags per month, • Televisions are lifted to carts on an as needed basis, • Chemical drums are lifted from ground to cart to ground about 1 x month, • Lint bag is lifted out of tub of water from squat position 1 x day and replaced with clean bag, • Stair climbing: 20-30 steps between flights. Stair climbing takes place several times an hour and is unavoidable, • Standing and walking is essential all day Environment: * Must be able to tolerate vibration of hand tools • Must be able to tolerate inclement, cold, and very warm environmental temperatures, • Must be able to withstand 30 m.p.h. winds while working in air ducts, • Must handle chlorine, acids, and caustics (protective gear is provided), • Must have excellent balance for ladder climbing, standing on round structures such as the boiler (when adjusting overhead valves), • Must be able to tolerate noisy machinery, air compressors, motors, very frequently Sensory: • Sight, hearing, balance needed to analyze problems, make repairs, safety purposes, • Good sensation is also needed as engineers often work

Job Description Job Title: Commercial / Industrial Chiller Technician Location: Lakewood, NJ Position Type: Full-Time Reports To: Service Manager / Operations Director Job Overview We are seeking an experienced and certified Chiller Technician to join our HVAC/R service team. In this role, you will be responsible for installing, inspecting, maintaining, troubleshooting, and repairing large-scale commercial and industrial chiller systems (centrifugal, screw, scroll, and reciprocating). The ideal candidate has deep technical knowledge of thermodynamics, electrical controls, and refrigerant safety, along with a strong commitment to preventative maintenance and client satisfaction. Key Responsibilities Maintenance & Inspection • Perform routine preventative maintenance on air-cooled and water-cooled chillers, cooling towers, pumps, and auxiliary equipment., • Inspect electrical wiring, motor starters, compressors, heat exchangers, and safety controls to ensure peak operating efficiency., • Monitor oil levels, oil pressure, fluid levels, and refrigerant charges; perform tube brushing and oil/filter changes as required. Diagnostics & Repair • Diagnose complex mechanical, electrical, and refrigeration faults using electronic meters, pressure gauges, and diagnostic software., • Perform major component overhauls and repairs, including compressor rebuilds/replacements, valve replacements, and leak repairs., • Troubleshoot low-voltage and high-voltage control circuits, variable frequency drives (VFDs), and Building Automation System (BAS) interfaces. Compliance, Safety & Documentation • Recover, evacuate, and charge refrigerants in strict compliance with EPA regulations and environmental standards., • Maintain clear, accurate service logs, work orders, and safety records for every site visit., • Adhere to all OSHA safety protocols, lock-out/tag-out (LOTO) procedures, and PPE requirements in industrial environments. Qualifications & Requirements • Certifications:, • Universal EPA Section 608 Certification (Required)., • Valid Driver’s License with a clean driving record., • Journeyman HVAC/R license or formal vocational training preferred., • Factory training/certifications from major manufacturers (Trane, Carrier, York/Johnson Controls, Daikin) a strong plus., • Experience: Minimum 3–5 years of hands-on experience working directly with commercial or industrial chiller systems., • Skills:, • Proficient in reading electrical schematics, piping diagrams, and control logic prints., • Strong working knowledge of hydronic systems, fluid mechanics, and digital control systems (BAS/PLC)., • Excellent physical stamina (ability to lift up to 50 lbs, work on ladders/rooftops, and work in mechanical rooms). Benefits & Compensation • Salary: Competitive hourly wage (commensurate with experience)., • Perks:, • Service truck / company vehicle and fuel card., • Benefits package available upon discussion, • Paid time off (PTO) and paid holidays., • Ongoing factory training and continuing education support., • Health insurance (medical, dental, vision), • 401(k) with company match

Job Description Physician Assistant / Cardiac or Vascular - Bronx, NY (#3338) Location: Bronx, NY Employment Type: This is a Full-time or Part-time (minimum of 3 days a week) Salary: $140,000 - $160,000 per year About Greenlife Healthcare Staffing: Greenlife Healthcare Staffing is a leading nationwide recruitment agency dedicated to connecting healthcare professionals with top-tier opportunities. We partner with hospitals, clinics, nursing homes, multi-specialty groups, and private practices to match talented individuals with roles that align with their skills and career goals. Position Overview: Greenlife Healthcare Staffing is seeking a motivated Physician Assistant / Cardiac or Vascular to join a dynamic multi-specialty practice in the Bronx, NY. This role is open to experienced NPs, offering the chance to provide high-quality cardiac care in a collaborative, innovative environment. Requirements Qualifications: • Education: Master’s or Doctoral degree in Nursing from an accredited program., • Licensure: Active NY State Physician Assistant License; Board Certification required., • Experience: Must have experience in Vascular surgery, vascular medicine, cardiology, or general surgery. (will consider RN Vascular exp as well), • Technical Skills: Proficiency in EHR systems, cardiac diagnostics (e.g., EKG, stress tests), and treatment protocols., • Soft Skills: Strong communication, empathy, teamwork, and adaptability in fast-paced settings. Key Responsibilities: • Conduct comprehensive patient evaluations, including history and physical exams, to assess cardiovascular and vascular health. Order and interpret diagnostic tests (e.g., ECGs, stress tests, echocardiograms, vascular ultrasounds, angiograms) to aid in diagnosing conditions like heart failure, arrhythmias, coronary artery disease, and peripheral arterial disease., • Formulate, initiate, and manage evidence-based treatment plans under physician supervision. This includes prescribing medications, providing lifestyle modification counseling, and coordinating pre- and post-procedural care for interventions like catheterizations, stents, or surgeries., • First-assist in the operating room or catheterization lab during surgical procedures (e.g., CABG, valve repairs, vascular bypass) and/or perform specific diagnostic and therapeutic procedures (e.g., wound care, suture removal, arterial line placement, cardioversion)., • Manage the ongoing care of patients with chronic cardiovascular conditions. Monitor treatment response, adjust medications, assess for complications, and provide continuity of care during hospital admissions, clinic visits, and post-discharge., • Educate patients and families on disease processes, treatment options, and preventive strategies. Serve as a liaison, coordinating care between the physician, other specialists, nurses, and rehabilitation services to ensure a cohesive treatment plan. Benefits Why Join Us? • Competitive Compensation:, • $140,000 - $160,000 annual salary (based on experience and schedule)., • Comprehensive Benefits:, • Medical, Dental, and Vision insurance, • Flexible Spending Account, • Paid Time Off, • Retirement Savings, • Commuter Benefits program, • Malpractice insurance coverage, • Loan repayment, • Flexible schedules, • Stable Employment, • Exclusive 20% Discount Tuition Reduction with local college, • Work Schedule: Flexible options: This is a Full-time or Part-time (minimum of 3 days a week)., • Professional Growth: Collaborative environment with experienced cardiologists and specialists., • Impactful Work: Improve cardiac or vascular health outcomes for a diverse patient population in the Bronx.

Job Description Job Title: Mechanical Coordinator Location: Jamaica, NY Type: 6 month Contract Per diem Mob/demob Responsibilities • Oversee mechanical contractor to make sure that they are doing the work as per specified drawings, • Handle all mechanical LOTO requests as needed for both the mechanical contractor as well as the plant, • Maintain mechanical daily reports, • Coordinate mechanical contractor equipment deliveries, boom truck, cranes, pipe/valve deliveries etc., • Oversee mechanical trades onsite regarding all safety standards, • Monitor all mechanical installations to ensure quality and safety standards are met, • Track mechanical documentation such as blow down reports, weld x-rays etc., • Act as the liaison between plant operations and the mechanical contractors and sub-contractors, • Keep plant management informed of all mechanical concerns, issues, and happenings Requirements • OSHA 30 SST Supervisor, • Minimum high school diploma, GED, etc., • General computer knowledge for daily report completion, • Can do/Proactive attitude towards situations and issues System One, and its subsidiaries including Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. Ref: #193-Precision Oakridge

Channel Sales Manager – North America Remote | Michigan Strongly Preferred Candidates located in Indiana, Illinois, Wisconsin, Ohio, or Pennsylvania will also be considered. Travel Throughout North America (30–50%) About Ross Controls Ross Controls is a global industrial manufacturer specializing in fluid power safety, machine safety, pneumatic control, hydraulic, and automation solutions. Headquartered in Ferndale, Michigan, the company designs and manufactures pneumatic valves, safety systems, controls, and engineered solutions used by OEMs and industrial manufacturers throughout the world. Founded in 1921, Ross Controls is recognized as a leader in pneumatic valve technology and safety systems, helping organizations improve operator safety, regulatory compliance, and operational performance. With a growing portfolio of industrial brands and an extensive distributor network, Ross delivers innovative solutions that enable safer, more efficient automated operations. About the Role ROSS Controls is creating a new Channel Sales Manager role to strengthen, optimize, and grow our North American distributor network. This highly visible position will serve as the primary liaison between ROSS and our distributor partners throughout the United States and Canada. This is not a traditional regional or territory sales role. The successful candidate will primarily focus on channel strategy, distributor development, partner engagement, business reviews, performance management, channel optimization, and revenue growth through independent distribution partners. As our portfolio continues to expand across multiple product lines and brands, we are seeking an experienced channel professional who can help build stronger distributor partnerships, improve channel effectiveness, create accountability, and drive long-term growth. This role is ideal for someone who enjoys influencing without authority, building relationships, solving business challenges, and creating strategies that drive channel success. What You'll Do • Develop, manage, and grow the distributor network throughout North America, • Serve as the primary liaison between Ross Controls and independent distribution partners, • Own distributor relationship strategy, engagement planning, performance management, and business growth initiatives, • Build strong relationships with distributor principals, sales leaders, and channel personnel, • Conduct regular business reviews and quarterly business reviews (QBRs) focused on sales performance, growth opportunities, and strategic initiatives, • Establish performance expectations and accountability metrics with distributor partners, • Monitor distributor performance and implement plans to improve results and address underperformance, • Develop distributor recovery plans and growth plans as needed, • Identify, evaluate, recruit, onboard, and develop new channel partners where strategic coverage is required, • Deliver product, sales, application, and channel-development training programs, • Support distributors with territory planning, account development, market penetration, and growth strategies, • Manage channel activities, pipeline opportunities, and forecasting within CRM systems, • Analyze channel performance, sales trends, distributor effectiveness, and market opportunities, • Partner closely with Sales, Marketing, Customer Service, Operations, Product Management, and Engineering teams, • Support product launches, channel marketing initiatives, trade shows, and industry events What We're Looking For Required Qualifications • Bachelor's degree in Business, Marketing, Engineering, or equivalent industry experience, • 5+ years of dedicated channel management, distributor management, channel development, or partner management experience within an industrial or manufacturing environment, • Proven success growing revenue through industrial distributors, • Experience developing and executing channel growth strategies, • Experience conducting distributor business reviews and performance management discussions, • Experience managing distributor performance, accountability, and growth planning, • Proven ability to influence distributor principals, sales leadership teams, and internal stakeholders without direct authority, • Strong relationship-building, communication, and presentation skills, • Experience utilizing CRM systems for pipeline management, forecasting, and reporting, • Highly organized and self-directed with the ability to manage multiple priorities independently, • Ability to travel throughout North America and maintain a valid passport for travel to Canada Preferred Industry Experience Experience in one or more of the following industries is highly desirable: • Pneumatics, • Hydraulics, • Fluid Power, • Industrial Automation, • Machine Safety, • Motion Control, • Industrial Controls, • OEM Manufacturing, • Process Automation, • Industrial Distribution What Makes You Successful • You are a natural relationship builder who enjoys working with distributors and channel partners., • You balance distributor advocacy with accountability and business discipline., • You are proactive, organized, and capable of working with limited supervision., • You thrive in a collaborative environment and work effectively across multiple departments., • You bring creativity and flexibility when solving business challenges., • You can influence outcomes and drive accountability without direct authority., • You are a self-starter who takes ownership and follows through., • You are comfortable working in a fast-moving, entrepreneurial environment with limited bureaucracy., • You are comfortable engaging both distributor leadership and front-line sales teams., • You use data, analytics, and CRM discipline to drive decisions and identify growth opportunities. Why Join Us • Newly created, high-impact role with significant visibility across the organization, • Opportunity to shape and strengthen a North American distributor network supporting approximately $40 million in annual sales, • Stable, growing organization with more than 100 years of history, • Collaborative, family-oriented culture with accessible leadership and minimal bureaucracy, • Opportunity to make a direct impact on growth, channel strategy, and customer engagement, • Autonomy to develop relationships, drive initiatives, and influence business outcomes, • Work alongside a leadership team that values humility, innovation, collaboration, and continuous improvement Ready to Make an Impact? If you're a proven industrial channel professional who enjoys developing distributor networks, driving growth, creating accountability, and building lasting partnerships, we'd love to hear from you.

We’re working with an established custom equipment manufacturer in the Dayton area that is looking to add a Project Engineer to its engineering team. This is a hands-on engineering and design position focused on the fluid-handling, plumbing, and instrumentation systems used within custom industrial equipment. The engineer will own the P&ID and fluid-system design portion of assigned projects, working alongside mechanical, electrical, controls, and manufacturing teams from initial design through equipment build and commissioning. The team is open to both early-career engineers and more experienced candidates. Recent engineering graduates with a strong technical foundation can be trained into the role, while candidates with direct P&ID, process, or fluid-system design experience can come in at a more experienced level. Compensation will be based on experience and technical background. Travel is very limited at less than 10%. WHAT YOU’LL WORK ON • Develop P&IDs and detailed plumbing/fluid schematics for custom manufacturing equipment, • Design systems involving water, compressed air, nitrogen, refrigerants, hydraulic fluids, fuels, oils, vacuum, and other process fluids, • Specify pumps, valves, flow meters, regulators, filters, piping, tubing, fittings, instrumentation, and safety devices, • Determine instrument locations, process connections, isolation points, drains, vents, and other system components, • Perform calculations related to flow, pressure drop, pipe sizing, valve sizing, pumps, and vacuum systems, • Create bills of materials, component specifications, and supporting engineering documentation, • Work closely with Controls, Mechanical, Manufacturing, Purchasing, and Service throughout the equipment build, • Support equipment checkout and commissioning, including pressure, leak, flow, vacuum, temperature, and instrumentation testing, • Troubleshoot fluid-system and instrumentation issues during build and startup WHAT WE’RE LOOKING FOR • Bachelor’s degree in Mechanical Engineering, Mechatronics Engineering, Chemical Engineering, or a related technical discipline, • Experience with or a strong foundation in mechanical, piping, plumbing, process, instrumentation, or fluid-handling systems, • Ability to read and create engineering drawings and schematics, • Understanding of components such as pumps, valves, fittings, regulators, piping/tubing, and instrumentation, • CAD experience with AutoCAD, DraftSight, SolidWorks, or similar software, • Strong technical problem-solving skills and willingness to learn a specialized equipment environment, • Experience creating P&IDs, designing industrial fluid systems, working with custom machinery, or supporting equipment commissioning is highly valued but not required for an early-career candidate. Familiarity with PLC I/O, instrumentation, alarms, and interlocks is also beneficial. EXPERIENCE LEVEL The team is flexible on experience and is considering candidates ranging from recent engineering graduates and early-career engineers through more experienced professionals. For an early-career hire, the focus will be on a strong engineering foundation, technical aptitude, and the ability to learn the company’s specialized fluid-system applications. More experienced candidates with direct Project Engineering, P&ID, process, or fluid-system design experience are also strongly encouraged to apply and can be considered at a higher compensation level based on their experience. WHY THIS OPPORTUNITY? This is a strong opportunity for an engineer who enjoys the technical design side of projects without wanting a position centered around project schedules or constant customer management. You’ll have ownership of your engineering work while collaborating closely with several other engineering disciplines. The position offers very limited travel, exposure to a variety of custom industrial equipment, and potential opportunities to grow into technical leadership as the engineering organization continues to develop.

Job Title: CNC Programmer / Operator. We are seeking an experienced CNC Programmer for our manufacturing facility in Long Island City, NY. The Mazak CNC Programmer will program, set up, and operate CNC machinery while working closely with our manufacturing and quality teams to ensure components are

Project Manager - Industrial | Final Control For over 90 years, Control Associates has been the premier provider of industrial process automation solutions in the New York tri-state area. As an Emerson Automation Solutions partner, we deliver world-class valve, equipment, services, and integrated solutions to critical industries including Pharmaceutical, Chemical, Power Generation, and Natural Gas Distribution. As we continue to grow, we're seeking an experienced Project Manager to drive the successful execution of complex Final Control projects from order entry through commissioning. Your Role and Impact: As our Project Manager for Industrial Industries, you'll be the driving force behind the scheduling and execution of complex valve, equipment, services, and integrated solutions projects. You'll manage multiple projects across various Emerson business units, coordinate after-sale opportunities, and serve as the critical link between our internal teams, suppliers, and customers. This is a role for a detail-oriented, deadline-driven professional who thrives on delivering results in a fast-paced, collaborative environment. What You'll Lead and Deliver: Project & Practice Management: • Execute complex valve, equipment, services, and integrated solutions orders from receipt of customer purchase order through shipment, startup, and commissioning, • Create and manage internal project schedules, budgets, milestones, and project reviews to meet delivery commitments, • Drive both internal and external supplier/vendor organizations and customers to meet milestone schedule commitments, • Identify resources needed and assign individual responsibilities across project teams, • Manage day-to-day operational aspects of projects and scope, • Minimize risk and exposure through proactive issue identification and resolution, • Ensure project documents are complete, current, and stored appropriately, • Effectively apply QMS/ISO 9000 processes and Control Associates' project methodology and standards Financial Management: • Manage project budgets for materials and labor, • Analyze project profitability, revenue, margins, and utilization, • Accurately forecast revenue, profitability, and cost-to-completion projections, • Follow up with clients regarding outstanding invoices as needed Business Development: • Identify business development and add-on sales opportunities within existing projects, • Lead proposal efforts including project scoping and loss of earnings assessments Client & Stakeholder Management: • Manage day-to-day client interactions and set clear expectations, • Build lasting relationships with client personnel that foster long-term partnerships, • Collaborate with Account Managers, Sales Engineers, Field Services, Service Centers, and Accounting to resolve project requirements and discrepancies, • Facilitate project kick-off meetings, status reviews, and team communications, • Communicate relevant project information effectively to all stakeholders What You'll Bring: Required Qualifications: • Bachelor's degree (Engineering concentration preferred), • 2+ years of experience in a project engineering or project management role within engineering, manufacturing, construction, or equivalent industry, • Strong project scoping, planning, budgeting, and schedule management capabilities, • Excellent written and verbal communication skills for client-facing interactions, • Strong organizational, time management, and follow-through skills, • Mechanical aptitude and technical product knowledge or demonstrated ability to learn technical products and processes, • Proficiency with Microsoft Office Suite, • Experience with Enterprise Resource Planning (ERP) systems strongly preferred, • Experience with MS Project or similar scheduling tools Preferred Qualifications: • Experience with IFS ERP system, • Experience with AutoCAD or similar drafting programs, • Background in valve, instrumentation, or process control industries What Sets You Apart: You're adaptable and thrive when managing competing demands in a dynamic environment. You communicate clearly and keep all stakeholders well-informed. You resolve conflicts with composure and negotiation skills. You take ownership of your projects and hold yourself accountable for outcomes. You build lasting client relationships through responsive, professional service and consistently deliver results on time and within budget. How This Role Embodies Our Core Values: Customer Focus: You'll prioritize client needs by delivering projects on time, within budget, and to the highest quality standards while building lasting customer relationships. Collaboration: You'll achieve superior results by working closely with Account Managers, Sales Engineers, Field Services, suppliers, and customers to drive successful project outcomes. Innovation: You'll identify creative solutions to project challenges and continuously look for opportunities to improve processes and deliver additional value to clients. Integrity: You'll build trust through transparent communication, honest project reporting, and consistent delivery on commitments. Passion: You'll bring enthusiasm, dedication, and strong work ethic to ensuring every project succeeds and every client is satisfied. What We Offer: • Competitive salary commensurate with experience plus bonus potential Base Salary range for this role is $95K-$115K, with a bonus potential • Comprehensive health, dental, and vision insurance, • 401(k) with company match, • Employee Stock Ownership Plan (ESOP) - own a piece of the company, • Generous paid time off including vacation days, holidays, and sick leave, • Professional development and career advancement opportunities, • Collaborative team environment with experienced industry professionals Ready to Drive Project Excellence? If you're a results-driven project management professional who thrives on delivering complex technical projects while building strong client relationships, we want to hear from you! Join Control Associates and apply your project management expertise to solutions that power critical industries. Location: Allendale, NJ | Reports to: Service Proposal Manager | Standard business hours: Monday-Friday, 8 AM-5 PM | Some travel to customer sites required. Work visa sponsorship not available. Direct hire only. Control Associates is an Equal Opportunity Employer committed to diversity in the workplace. Control Associates participates in E-Verify. Click here to view _

Job Description Maintenance Worker Full Time 9am-5pm United Hebrew is seeking a Full-Time Maintenance Worker to join our team of dedicated professionals in the Building Services department to work as a key part of the team that ensures each visitor and resident has an enjoyable experience by making sure that the facility is well-maintained and operational Full-time workers this position receive Union 1199 full benefits package, including paid time off (vacation, sick, personal), health, dental, and vision insurance. Some things about working at United Hebrew • Strong team and professional work environment, • Meaningful life engagement with residents, • FREE parking on campus, along with street parking, • Bee-Line 45 bus stops right in front of the campus, • Excellent staff-to-resident ratio, • Respectful and collaborative management team Position Qualifications: • High School Diploma or equivalent, • Excellent teamwork, interpersonal and communication skills required, • Two or more years of proven experience as a maintenance worker, construction role or similar, • Basic working knowledge of electrical, plumbing skills (changing electrical outlets, identifying and changing fuses/ability to identify and change toilet flush and fill valve, flapper, lever and floor flange), • Prior experience in a healthcare setting a plus Job Posted by ApplicantPro

Job Description Qualifications: Mechanic I - Water/Wastewater Treatment Facility Here's What You'll Need: One year of experience in the maintenance of wastewater treatment plants and related equipment, or similar maintenance experience A valid Certified Maintenance & Reliability Technician (CMRT) certification or ability to obtain within 3 years of date of hire Proficiency in the use of Computerized Maintenance Management Systems (CMMS) A valid drivers license with no major infractions Welding experience required Ideally, Youll Also Have: Forklift experience Experience in serving municipal utility client Safe work practices Responsibilities: At , we challenge what is currently accepted, so we can shape innovative and lasting solutions for tomorrow. Through the delivery of our operations and maintenance services, youll make it simpler and more seamless for our municipal clients to operate safely and efficiently, empowering communities to focus on what matters most to them people. As a Mechanic, youll join a collaborative team ensuring that our clients can deliver their services uninterrupted. Based in Hoboken, New Jersey, youll have the opportunity to perform a variety of tasks in the preventive and corrective maintenance on water/wastewater treatment plants and related facilities equipment on an assigned shift. Youll contribute to the success of our program with efficient preventive maintenance and effective solutions to challenges that may arise in municipal facilities. Youll perform preventive and corrective maintenance on buildings, structures, grounds, machinery and equipment; lubricate equipment and check for malfunctions; replace packing in pumps or valves; replace bearings in motors, pumps, and other equipment; tune engines, set valve clearance, clean, and adjust regulators; examine equipment failures to identify cause and to prevent recurrences; and install and sets up new equipment. Youll also clean and paint interior and exterior equipment and buildings; lean out pipes and perform other plumbing and pipe fitting tasks as required; use gas and/or arc welding equipment to heat, cut, braze, or weld; perform duties of painter in their absence; assist in keeping maintenance records; and perform other duties as required. Most importantly, youlltake actionto ensure the safety, health and well-being of you and your team. Working Conditions & Physical Requirements: Safety is a core value at . We are committed to providing a safe and healthy workplace for all employees. This position will spend a substantial amount of time performing safety sensitive labor or services. Comments/Special Instructions Candidate will work for at the North Hudson Sewerage Authority which includes 2 wastewater treatment plants and pump stations. Work schedule: Monday through Friday 630 AM to 3 PM (0.5 Lunch and 2 15 mins breaks); once trained will be required to be on the on call rotating schedule for call outs.

Job Description Qualifications: Here's What You'll Need: Four years of experience as an electrical/mechanical technician Proficiency in the use of Computerized Maintenance Management Systems (CMMS) Welding experience A valid drivers license with no major infractions Ideally, Youll Also Have: Experience working with municipal utility client A valid Certified Maintenance & Reliability Technician (CMRT) certification or ability to obtain within 3 years of date of hire Forklift experience Safe work practices At , we challenge what is currently accepted, so we can shape innovativeandlasting solutions for tomorrow.Through the delivery of our operations and maintenance services,youll make it simpler and more seamless for our municipal clients to operate safely and efficiently, empoweringcommunities to focus on what matters most to them people. As a Mechanic, youll join a collaborative team ensuring that our clients can deliver their services uninterrupted. Based in Hoboken, New Jersey at the North Hudson Sewerage Authority, youll have the opportunity to perform a variety of tasks in the preventive and corrective maintenance on water/wastewater treatment plants and related facilities equipment on an assigned shift. Youll contribute to the success of our program with efficient preventive maintenance and effective solutions to challenges that may arise in municipal facilities. Youll perform preventive and corrective maintenance on buildings, structures, grounds, machinery and equipment; lubricate equipment and check for malfunctions; replace packing in pumps or valves; replace bearings in motors, pumps, and other equipment; tune engines, set valve clearance, clean, and adjust regulators; examine equipment failures to identify cause and to prevent recurrences; and install and sets up new equipment. Youll also clean and paint interior and exterior equipment and buildings; lean out pipes and perform other plumbing and pipe fitting tasks as required; use gas and/or arc welding equipment to heat, cut, braze, or weld; perform duties of painter in their absence; assist in keeping maintenance records; and perform other duties as required. Most importantly, youlltake actionto ensure the safety, health and well-being of you and your team. Based in North Hudson Sewerage Authority, youll have the opportunity to perform a variety of tasks in the preventive and corrective maintenance on water/wastewater treatment plants and related facilities equipment on an assigned shift. Youll contribute to the success of our program with efficient preventive maintenance and effective solutions to challenges that may arise in municipal facilities. Youll perform preventive and corrective maintenance on buildings, structures, grounds, machinery and equipment; lubricate equipment and check for malfunctions; replace packing in pumps or valves; replace bearings in motors, pumps, and other equipment; tune engines, set valve clearance, clean, and adjust regulators; examine equipment failures to identify cause and to prevent recurrences; and install and sets up new equipment. Youll also clean and paint interior and exterior equipment and buildings; lean out pipes and perform other plumbing and pipe fitting tasks as required; use gas and/or arc welding equipment to heat, cut, braze, or weld; perform duties of painter in their absence; assist in keeping maintenance records; and perform other duties as required. Most importantly, youlltake actionto ensure the safety, health and well-being of you and your team. Working Conditions & Physical Requirements: Safety is a core value at . We are committed to providing a safe and healthy workplace for all employees. This position will spend a substantial amount of time performing safety sensitive labor or services. Comments/Special Instructions Candidate will work 630am to 3pm Monday through Friday, after done with training will be required to go on the on call rotation schedule- 1 week Friday to Friday. Welding experience required

Job Description Position: Maintenance Technician - Z Hotel NYC Long Island City, NY Job Description: The maintenance position repairs and maintains facility buildings and equipment. He/she repairs include building and room renovation, plumbing, painting, sheetrock work, electrical, and carpentry. This position also may require the completion of custodial work as necessary. To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions. Required Skills and Requisites: • High School Graduate or General Education Degree (GED): or Work Equivalent, • Experience in Maintenance Engineering and basic carpentry. Responsibilities and Duties: • Maintain timelines and work schedules in accordance with the preventive maintenance program., • Check work orders and night reports for any problems., • Make rounds checking these problem areas and note any information needed or safety concerns in the hotel., • Schedule work in accordance with preventive maintenance program in rooms, coordinating with the Executive Housekeeper and Front Office., • Perform electrical work orders: a) Replace light switches. b) Reset circuit breakers. c) Replace wall plug receptacles. d) Replace fluorescent light ballast. e) Replace the electrical solenoid valve. f) Replace small motors. g) Use test equipment; multimeter, voltage tester, amp probe., • Perform plumbing work orders: a) Unplug sinks, toilets, garbage disposals and drain lines. b) Repair or replace valves, gate, globe, ball, solenoid valves. c) Replace washer, gaskets, vacuum breakers, toilet seals. d) Work with different types of pipe including conduit, copper, black, cast iron and pipe hangers., • Perform Preventive Maintenance work orders: a) Monitor and maintain all laundry and dry cleaning equipment. b) Monitor and maintain all kitchen equipment. c) Maintain guestrooms using Rooms Preventive Maintenance Program Punch List. d) Change air-conditioning filters every month. e) Check HVAC equipment; change filters, belts, bearings and lubricate as necessary. Also check for unusual noise or vibration, adjusting as necessary. f) Change or repair locks as needed. g) Cut and mark keys for guestroom key inventory., • Check and test-run emergency generator weekly., • Perform general maintenance to guestrooms and public areas., • Assist electrician, carpenter, plumber and painter in all phases of repair work., • Assist other engineering personnel as instructed by supervisor in regards to routine and preventive maintenance, • Maintain cleanliness and organization of the work area to include: a) inventories b) requisition (receipt and storage) c) trash removal and clean up, • Maintain the proper use, cleaning, maintenance and storage of all tools. Handle chemicals for designated uses/surfaces., • Ensure security of any assigned keys. At Palette Hotels, we are dedicated to creating and sustaining meaningful hospitality careers for our associates. We support our associates with highly competitive salaries, outstanding health, benefits, extensive training and development programs, promotion within the organization, and a positive team-based culture where people make the difference. Palette Hotels, is an equal opportunity employer with policies prohibiting unlawful discrimination on the basis of any protected classification under applicable local, state and/or federal laws, which can include race, color, creed, sex, national origin, age, veteran status or physical or mental disability unrelated to job requirements. Palette Hotels policies also provide for a drug-free workplace, where the use, possession, or influence of illegal drugs or alcohol while on company time is generally prohibited. An employee's use (or abuse) of legally prescribed medication may also implicate company policy, where it impairs judgment or work performance or otherwise creates workplace safety risks. Palette participates in E-Verify to confirm that you are authorized to work in the U.S. only after a job offer is accepted and Form I-9 is completed. For more information on E-Verify, please visit the Everify website.

The best teams are created and maintained here. Irrigation Tech Level II demonstrates proficient knowledge of irrigation systems and works independently to monitor, diagnose, and repair complex issues. This role performs comprehensive inspections and system upgrades with minimal oversight, ensuring optimal performance and client satisfaction. Duties and responsibilities: • Independently monitor and test new irrigation installations, • Diagnose and repair complex system issues., • Evaluate and optimize pipe and valve placements and help with seasonal system tasks such as start-ups and winterizations., • Conduct detailed inspections, document results, and plan upgrades and enhancements to client systems. Education and experience: • Minimum of 1 year of productive experience in the installation, inspection, and repair of irrigation systems, • A valid driver's license, • Proficient knowledge of trenchers, multi-meters, wire locators, ditchers and pipe sizing are also essential., • Bilingual in Spanish, • Ability to create and read site map-colored charts/legends. Physical demands/requirements: • Must be able to physically perform the basic life operational functions of climbing, balancing, stooping, kneeling, crouching, crawling, reaching, standing, walking and repetitive motions., • Must be able to perform medium work exerting up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 50 pounds of force constantly to move objects., • Must possess the visual acuity to operate equipment and motor vehicles, perform trades tasks, inspect the work of others, and review work for accuracy, neatness, and thoroughness. Work environment: • Work in/or about situations near direct automotive traffic, • Work near or about natural bodies of water., • Ability to work in extreme conditions temperatures may exceed 100 degrees Fahrenheit., • Ability to work in direct sunlight for extended periods of time. BrightView Landscapes, LLC is an equal opportunity and E-Verify employer. This job description is subject to change at any time. Compensation pay range: $25-$38/hour depending on experience BrightView offers a suite of health, wellness, and financial benefits to full-time team members. Benefits offerings for full-time team members include medical, dental, and vision insurance, ancillary and voluntary products, a 401k savings plan with employer contributions, and 6 to 9 company paid holidays per year. Employees may also be eligible to receive paid time off for vacation and/or sick leave, tuition reimbursement, and/or potential variable pay opportunities based on position and performance. A detailed benefits package will be provided during the interview process. It's not just a team. It's one BrightView.

The Business Development Manager is responsible for driving revenue growth, expanding market share, and identifying new business opportunities for our industrial valve portfolio (safety, relief and control valves). Together We Build Better infrastructure, better homes and better businesses.

Clow Valve - IHydrant Field Sales. This job, while a remote position, requires working collaboratively with other members of the valve and hydrant teams, including product managers, engineering, and sales to ensure overall project success.

Job Title: CNC Programmer / Operator. We are seeking an experienced CNC Programmer for our manufacturing facility in Long Island City, NY. The Mazak CNC Programmer will program, set up, and operate CNC machinery while working closely with our manufacturing and quality teams to ensure components are

What You'll Lead and Deliver:Project & Practice Management:• Execute complex valve, equipment, services, and integrated solutions orders from receipt of customer purchase order through shipment, startup, and commissioning• Create and manage internal project schedules, budgets, milestones, and pr

As our Project Manager for Industrial Industries, you'll be the driving force behind the scheduling and execution of complex valve, equipment, services, and integrated solutions projects. As we continue to grow, we're seeking an experienced Project Manager to drive the successful execution of comple

We are seeking an experienced CNC Programmer for our manufacturing facility in Long Island City, NY. The Mazak CNC Programmer will program, set up, and operate CNC machinery while working closely with our manufacturing and quality teams to ensure components are produced accurately and efficiently. J

Project & Practice Management: Execute complex valve, equipment, services, and integrated solutions orders from receipt of customer purchase order through shipment, startup, and commissioning Create and manage internal project schedules, budgets, milestones, and project reviews to meet del

Job Title: CNC Programmer / Operator Location: Long Island City, NY Company: Williams Valve Salary: $30 - $40/hr. We are seeking an experienced CNC Programmer for our manufacturing facility in Long Island City, NY. The Mazak CNC Programmer will program, set up, and operate CNC machinery while workin

Job Title: CNC Programmer / Operator Location: Long Island City, NY Company: Williams Valve Salary: $30 - $40/hr. We are seeking an experienced CNC Programmer for our manufacturing facility in Long Island City, NY. The Mazak CNC Programmer will program, set up, and operate CNC machinery while workin

Bray International is seeking a Valve Design Engineer in the United States to lead design, development, and analysis of industrial valve products.You will coordinate with cross-functional teams on New Product Development and product maintenance, ensuring compliance with safety, reliability, and manu

Job DescriptionDescription: POSITION SUMMARY The Facilities Maintenance Specialist is responsible for the reliable operation, maintenance, troubleshooting, and improvement of facility infrastructure and building systems supporting a GMP pharmaceutical/biotechnology manufacturing and laboratory environment. A primary responsibility of this position is the operation, troubleshooting, and maintenance of the Siemens Building Management System (BMS), including Siemens Desigo controls. The individual will use the BMS to monitor and troubleshoot HVAC and facility systems, analyze alarms and trends, evaluate equipment performance, and support environmental conditions throughout the facility. CORE REQUIREMENT – SIEMENS BMS / CONTROLS The successful candidate must have demonstrated hands-on experience with Siemens Desigo or a comparable Siemens Building Management System and be capable of using the BMS to troubleshoot HVAC equipment, alarms, sensors, valves, dampers, control sequences, trends, and environmental conditions. Requirements: KEY RESPONSIBILITIES • Serve as a key Facilities resource for the Siemens Desigo Building Management System (BMS)., • Monitor and troubleshoot HVAC and facility equipment through the Siemens BMS., • Diagnose BMS alarms, equipment faults, communication issues, sensor problems, and abnormal operating conditions., • Review AHU, RTU, chiller, boiler, humidifier, exhaust, and other HVAC system graphics and operating parameters., • Analyze BMS trends for temperature, humidity, pressure, airflow, supply/return temperatures, valve position, damper position, and other critical parameters., • Troubleshoot control loops and determine whether issues originate from controls, sensors, actuators, valves, dampers, mechanical equipment, or field devices., • Understand HVAC control sequences, including heating/cooling valve operation, humidity control, temperature control, and differential pressure., • Adjust authorized BMS setpoints, schedules, alarm limits, and operating parameters in accordance with approved procedures., • Identify recurring alarms and equipment performance issues and recommend corrective actions., • Work with Siemens and other controls vendors to troubleshoot system issues and implement corrective actions., • Support BMS upgrades, programming modifications, graphics changes, controls installations, and system commissioning., • Verify proper operation of controls following maintenance, repairs, or system modifications., • Maintain accurate documentation of BMS changes, alarms, troubleshooting activities, and corrective actions. FACILITIES MAINTENANCE • Perform preventive, predictive, and corrective maintenance on facility equipment and systems., • Troubleshoot and maintain AHUs, HVAC systems, chillers, boilers, pumps, compressors, vacuum systems, humidification systems, exhaust systems, plumbing systems, electrical systems, and building automation/control systems., • Troubleshoot low-voltage electrical and control circuits., • Perform inspections and monitor facility equipment for abnormal conditions., • Respond to equipment failures and facility emergencies., • Complete maintenance work orders and accurately document work performed., • Support contractors and outside service providers during repairs, inspections, and projects., • Assist with facility construction, equipment installation, relocation, and retrofit projects. GMP / LABORATORY ENVIRONMENT • Perform maintenance activities in GMP pharmaceutical, biotechnology, and laboratory environments., • Understand the impact of HVAC and facility systems on controlled environments., • Support temperature, humidity, pressure differential, and environmental monitoring requirements., • Follow applicable GMP, safety, environmental, and facility procedures., • Support investigations involving HVAC, facility equipment, environmental excursions, alarms, and system failures., • Work closely with Quality, Engineering, Operations, EH&S, and external contractors when required. PREVENTIVE / PREDICTIVE MAINTENANCE & RELIABILITY • Complete scheduled PM and demand work orders in a timely manner., • Identify recurring equipment problems and recommend reliability improvements., • Participate in root-cause troubleshooting and corrective actions., • Identify opportunities to improve equipment reliability and reduce downtime., • Maintain accurate equipment and maintenance records. VENDOR / CONTRACTOR MANAGEMENT • Provide oversight and technical direction to outside contractors and service providers., • Coordinate Siemens controls service and troubleshooting activities., • Review contractor work and verify that repairs meet facility requirements., • Assist with obtaining quotes, scheduling service, and coordinating facility projects. REQUIRED QUALIFICATIONS • High school diploma or equivalent; technical degree, trade certification, or associate degree preferred., • Minimum 5–7 years of facilities maintenance, building automation, HVAC, or facilities operations experience., • Strong hands-on experience with Siemens Desigo or comparable Siemens Building Management Systems., • Demonstrated experience troubleshooting HVAC equipment through a BMS/controls system., • Strong understanding of AHUs, HVAC systems, valves, dampers, pumps, sensors, actuators, and control sequences., • Experience working in a GMP pharmaceutical, biotechnology, laboratory, or similarly regulated environment preferred., • Strong mechanical and electrical troubleshooting skills., • Ability to read mechanical, electrical, HVAC, and controls drawings., • Experience with preventive and predictive maintenance programs., • Ability to work independently with minimal supervision., • Strong computer skills, including Microsoft Word, Excel, Outlook, and CMMS software., • Strong written and verbal communication skills. PREFERRED QUALIFICATIONS • Siemens Desigo certification or formal Siemens controls training., • Experience with Siemens Desigo CC, Insight, or related Siemens BMS platforms., • Experience troubleshooting DDC controls., • Experience with HVAC control sequences and PID/control loops., • Experience with BMS graphics, trending, alarm management, and system scheduling., • HVAC, electrical, controls, or stationary engineer trade certification., • NJ Black Seal Boiler Operator License., • Experience with cleanrooms and controlled environments., • Experience with chilled water, hot water, steam, compressed air, vacuum, and other facility utilities. PHYSICAL / SCHEDULE REQUIREMENTS • Frequent walking, standing, climbing, bending, kneeling, and working in mechanical spaces., • Ability to work from ladders and elevated locations and lift up to 50 lbs., • Participation in an on-call rotation., • Weekend and holiday coverage as required., • Overtime may be required based on facility needs., • Must successfully complete applicable background and drug/alcohol screening. SUCCESS IN THIS ROLE The successful candidate will be able to independently use the Siemens BMS as a troubleshooting tool—not simply monitor alarms. The individual should be able to connect BMS data to the physical equipment, identify the likely source of an HVAC or environmental problem, determine whether the issue is controls-related or mechanical, and coordinate the appropriate corrective action while mainta

Job Description • We are hiring immediately for a full time SERVICE TECHNICIAN position., • Location: 111 8th Avenue, New York, NY 10011. Note: online applications accepted only., • Schedule: Full time schedule. Monday through Friday; 7:00 am to 3:30 pm. Further details upon interview., • Requirement: Previous experience fixing specialty coffee equipment and customer service experience required., • Pay Range: $26.00 per hour to $30.00 per hour., • Additional Job Duties & Responsibilities:, • Perform scheduled preventive maintenance, routine inspections, equipment evaluations, and necessary repairs at customer locations to ensure optimal equipment performance and reliability., • Diagnose, troubleshoot, and repair mechanical, electrical, hydraulic, and plumbing-related issues on specialty coffee equipment to minimize downtime and maintain operational efficiency., • Respond promptly and professionally to customer service requests, equipment malfunctions, and emergency repair situations, delivering timely solutions and exceptional customer service., • Perform equipment rebuilds, refurbishments, and component replacements to restore functionality, extend equipment lifespan, and maintain established performance standards. Conduct thorough operational testing, equipment calibration, and performance evaluations to verify proper functionality, accuracy, and compliance with manufacturer specifications., • Execute established preventive maintenance schedules across assigned customer equipment fleets, proactively identifying potential issues and addressing maintenance needs before equipment failures occur., • Perform detailed maintenance and repairs on specialty coffee equipment, including group head rebuilds, steam valve servicing, gasket replacements, grinder maintenance, water system inspections, and pressure and temperature verification. *Internal Employee Referral Bonus Available The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: http://olivia.paradox.ai/moSkg About Canteen: Canteen brings break time to everyone. We combine food, service, and experience backed by industry-leading technology to help companies create a better workplace and connect their employees. Canteen’s solutions include markets, office coffee and snacks, unattended retail, and culinary. Our people are at the heart of everything we do. Their dedication, collaboration, and passion fuel our growth. Interested in joining our team? You bring the enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. Together, we’ll continue to transform our industry. Come for the job, stay for the career. We are Canteen. Job Summary Summary: Repairs, maintains and assists in the installation of vending machines and equipment. Essential Duties and Responsibilities: • Responds to dispatch calls for machine repairs using company-owned vehicle., • Calls on existing customers to determine adequacy of service; listens to and resolves service complaints., • Visually inspects and listens to machines to determine causes of malfunctions; dismantles machines to gain access to problem area., • Inspects parts to detect wear, misalignment or other problems; removes and replaces worn or defective parts; repairs broken parts; realigns and adjusts components; tests machine operation following repair., • Reviews inventory and orders parts; ships and receives machines; maintains equipment inventory., • Prepares machines for installation at accounts; assists in installations and removals., • Sets up and operates mechanical equipment and small hand tools, such as drills, grinders and welding torches, for machine repair., • Performs other duties as assigned. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. Associates at Canteen are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs). Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyCanteen.pdf About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. Canteen maintains a drug-free workplace. Req ID:1582181 Canteen

Job Description Title: Operator Location: Cedar Knolls, NJ (on-site) Status: Full Time (40 hours), Non-exempt Hourly Range: $33.63 Hourly + Overtime Benefits: We offer a competitive salary package, commensurate with experience, Comprehensive Health Benefits (medical, dental, vision), PTO including vacation, sick, and other forms of PTO, Retirement benefits, 457b option, Tuition Reimbursement/paid training, FSA, Life insurance (waiting periods may apply). Job Description Scope: The Operator performs a variety of operational and maintenance duties within the Water Quality and Operations Division to support the delivery of safe and reliable drinking water. Under direction, the position operates, monitors, and maintains water treatment and pumping systems, including pumps, valves, tanks, and related equipment, and conducts routine water quality sampling, testing, and data recording. The role supports treatment processes through chemical feed adjustments, equipment inspections, troubleshooting, and preventative maintenance activities. The Operator coordinates and assists with treatment and distribution system operations, maintains accurate operational records, and utilizes SCADA and other monitoring systems. This position requires demonstrated intermediate-level proficiency in water treatment operations and continued development of technical skills related to system operation, maintenance, and repair. Additional responsibilities include operating vehicles and equipment, maintaining work areas, supporting snow removal activities, and participating in standby rotations and emergency response activities as required. Key Responsibilities: • Render services for the purposes of providing a safe and reliable water supply for the public to the SMCMUA customers., • Demonstrated high level of customer service in accordance with SMCMUA standards., • Coordinates activities of workers engaged in filtering, physically and chemically treating, pumping, and testing raw and treated water throughout all processes., • The position requires demonstrated intermediate (recall) level proficiency in four (4) of the following functional areas. Proficiency is measured by demonstrated skills in SMCMUA standards, preventative maintenance, troubleshooting, repairs, installation of new equipment, and the use of tools and technology applicable to the functional area., • Treatment and Related Systems:, • Laboratory, Field, and/or Online Analysis, • Treatment Processes, • Treatment Plant, Pump Station, and Letdown Station Operation and/or Maintenance, • Electrical and/or Instrumentation and Controls, • Operate, maintain, inspect, troubleshoot, and repair treatment and pumping/storage equipment, tanks, pumps, valves, processes, industrial controls, and other related treatment and pumping/storage equipment and facilities., • Distribution of specified amounts of chemicals, such as sodium hypochlorite, orthophosphates, sodium hydroxide, sodium bisulfite, citric acid, and hydrochloric acid into water or adjustment of automatic devices., • Monitors panelboard, adjusting controls to regulate flow rates, loss of head pressure and water elevation, and distribution of water., • Backwashes tanks and filter beds., • Required to participate in Record Data Management in the following areas of Water Quality:, • Record Data content of chemical usage, water quality parameters, pressure gauges, flow meters, charts, HMI’s, and SCADA computer., • Maintains records and files with chemical usage and storage, equipment operation, and required water quality/ quantity data., • Takes and records periodic readings of relevant gauges., • Will be required to learn to utilize various types of electronic and/or manual recording and information systems used by agency, office, and related units., • Operate vehicles requiring a NJ Basic driver’s license and tow equipment and trailers., • Field and process control water quality analyses., • Sample collection, and analyze samples to determine pH, chlorine concentration, orthophosphate concentration, and turbidity, using specified equipment, i.e. colorimeter, turbidimeter, and pH meter., • Maintains the working area in a clean/ sanitary condition., • Continuous water quality monitor operation, maintenance, calibration, and troubleshooting related to all physical components of water system equipment., • Basic laboratory chemistry and microbiology analyses., • Use various hand tools., • Use various power tools and equipment., • Load, unload, and lift supplies, equipment, etc., • Operate snow removal and salting equipment to keep roads, parking lots, driveways, etc. clear and safe., • Operate, maintain, inspect, and repair SMCMUA vehicles and equipment; such as, changing light bulbs, windshield wipers, fluid and lubrication addition, changing of tires, changing batteries, and related assignments., • Participation in the Treatment System Stand-By Rotation, including TelDacSCADA alarm response., • Related and other duties. Duties, responsibilities, and activities may change at any time with or without notice as directed by SMCMUA Operational needs., • Performs related and other duties, as assigned. This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Functions of this position include work assignments in the ambient atmosphere including extreme cold, hot, wet, or other inclement weather conditions. Qualifications: EDUCATION & EXPERIENCE · U.S. accredited high school diploma or equivalent. Higher level degree or certification preferred in an approved field of study such as that obtained from a vocational or trade school, US military, or college or Associate or Bachelor level degrees in construction technology/management, engineering science, environmental studies, environmental science, chemistry, biology, or other approved program · Treatment and Pumping employees may possess a valid Public Water Treatment Operator license of the appropriate responsibility and applicable position level, depending on the permitted level of the facility, issued by the New Jersey Department of Environmental Protection. · Minimum of three (3) years of experience in operating, adjusting, regulating, repairing, and maintaining pumps, valves, electric motors, and other electrical and mechanical equipment of the type used in water treatment facilities, pumping stations, or filtration facilities LISCENSES & CERTIFICATIONS · Maintenance of a New Jersey Basic Driver’s License. · Employees in Municipal Water Utilities may be required to attend Incident Management training within a specified timeframe as determined by the appointing authority. · Other trainings may include but not be limited to online, courses, or approved alternates. o Small Water System: § 702A Wells § 702B Treatment Plants § 702C Disinfection § 702D Safety and Introduction to Small System Management § 702E Laboratory Procedures o Electrical and Mechanical training Courses as needed and dictated by physical system upgrades and requirements. SKILLS & COMPETENCIES · Knowledge of procedures and methods of operating, adjusting, and regulating water treatment plant pumps, valves, gauges, chemical feed pumps, filters, flowmeters, and other equipment. · Knowledge of methods for determining and maintaining proper flow rates to the distribution system. · Knowledge of the location and function of all equipment related to all SMCMUA facilities. · Knowledge of techniques for collecting water samples and conducting and recording standard chemical and bacteriological analysis of water. · Knowledge of pump and valve packing replacement, motor and pump bearing replacement, and equipment lubrication. · Knowledge of arithmetic operations for determining correct amounts of chemical doses. · Ability to utilize, complete, and assess, various types of electric and/or mechanical maintenance, such as oiling, greasing, cleaning, or replacing gaskets, piping, etc. · Ability to utilize, complete and assess various electrical maintenance such as testing, maintaining, or replacing, RTU/PLC, AC/DC power, basic radio troubleshooting, utilizing multi-meter (voltage/ current), ability to calibrate transmitters, and WQ instrumentation. · Ability to read, write, and understand English so that involved and complicated instructions and technical texts can be read and understood and legible written records can be produced and maintained, such as wiring schematics and development of standard operating procedures. · Ability to understand, remember and carry out oral and written directions; to work independently; to learn quickly from oral and written explanations and from demonstrations; to deal knowledgeably and courteously with co-workers, customers, and the general public. · Ability to utilize information technology for the purposes of performing the functions of this position, including basic knowledge of Microsoft Office. · Ability to work harmoniously with co-workers, supervisors, managers, and the public · Ability to demonstrate understanding and satisfactory compliance of SMCMUA policies, procedures, practices, processes, and essential functions. Company Description: In 1977, the Governing Bodies of Morristown, Morris Township, Morris Plains, and Hanover Township (the Creating Municipalities) passed parallel ordinances creating The Southeast Morris County Municipal Utilities Authority (SMCMUA). SMCMUA provides high-quality drinking water to customers in Morristown, Morris Township, Morris Plains, and Hanover Township with some service in Mendham Township and Harding Township, and to certain customers and municipalities outside its District in Morris County, New Jersey. On a typical day, about 100,000 people rely on SMCMUA's commitment to high quality for their drinking water needs. Equal Opportunity/Affirmative Action: SMCMUA prohibits discrimination based on the following protected categories: race, creed, color, national origin, nationality, ancestry, age, sex/gender, pregnancy, marital status, civil status, domestic partnership status, familial status, religion, affectional or sexual orientation, gender identity or expression, atypical hereditary cellular or blood trait, genetic information, liability for service in the Armed Forces of the United States, and disability. \nCompany Description In 1977, the Governing Bodies of Morristown, Morris Township, Morris Plains, and Hanover Township (the Creating Municipalities) passed parallel ordinances creating The Southeast Morris County Municipal Utilities Authority (SMCMUA). SMCMUA provides high-quality drinking water to customers in Morristown, Morris Township, Morris Plains, and Hanover Township with some service in Mendham Township and Harding Township, and to certain customers and municipalities outside its District in Morris County, New Jersey. On a typical day, about 100,000 people rely on SMCMUA's commitment to high quality for their drinking water needs. Equal Opportunity/Affirmative Action: SMCMUA prohibits discrimination based on the following protected categories: race, creed, color, national origin, nationality, ancestry, age, sex/gender, pregnancy, marital status, civil status, domestic partnership status, familial status, religion, affectional or sexual orientation, gender identity or expression, atypical hereditary cellular or blood trait, genetic information, liability for service in the Armed Forces of the United States, and disability. In 1977, the Governing Bodies of Morristown, Morris Township, Morris Plains, and Hanover Township (the Creating Municipalities) passed parallel ordinances creating The Southeast Morris County Municipal Utilities Authority (SMCMUA). SMCMUA provides high-quality drinking water to customers in Morristown, Morris Township, Morris Plains, and Hanover Township with some service in Mendham Township and Harding Township, and to certain customers and municipalities outside its District in Morris County, New Jersey. On a typical day, about 100,000 people rely on SMCMUA's commitment to high quality for their drinking water needs.\r\n\r\nEqual Opportunity/Affirmative Action:\r\nSMCMUA prohibits discrimination based on the following protected categories: race, creed, color, national origin, nationality, ancestry, age, sex/gender, pregnancy, marital status, civil status, domestic partnership status, familial status, religion, affectional or sexual orientation, gender identity or expression, atypical hereditary cellular or blood trait, genetic information, liability for service in the Armed Forces of the United States, and disability.

Job Description REQUIRED LICENSE AND CERTIFICATIONS ==================================== • License Requirements: Active NJ or Compact license is required at time of submission, • Required Certifications: BLS REQUIRED EXPERIENCE & CLINICAL SKILLS ================================== • Years of Experience Required: 2.5 years, • CVOR; Hybrid Room: Circulate required, scrub preferred, • Transplant: Must have some degree of transplant experience (Cardiac, lung, and/or kidney experience highly preferred), • Cardiovascular: Valve replacement; Coronary artery bypass graft (CABG); Transcatheter aortic valve replacement (TAVR); Aortic aneurysm repair; Dissection; VATs, • Vascular: Endovascular AAA; Carotid endarterectomy; Arteriogram; Angiogram; Trans carotid artery revascularization (TCAR); AV fistula; Femoral popliteal bypass graft

Job Description REMOTE POSITION, BUT CANDIDATE MUST RESIDE WITHIN 25-50 MILES OF THE POSTED LOCATION AND BE AVAILABLE FOR OCCASIONAL SITE VISITS IN NYC/NORTHERN NJ. Compensation is negotiated as a lump-sum fee for each assigned project or scope of work, based on the project scope, schedule, and responsibilities. This is not an hourly employee position. Project workload will vary, and no minimum number of projects or amount of work is guaranteed. Our goal is to develop long-term relationships with strong freelance professionals who can become regular members of AEP's extended project team. Qualified contractors may be added to our team for future assignments and contacted as suitable projects become available. Work is primarily performed from home. Occasional site visits in Northern NJ and NYC are required AEP Engineering, LLC is a growing MEP engineering consulting firm seeking an experienced, highly reliable U.S.-based freelance Plumbing / Fire Protection / Sprinkler Designer within practical driving distance of the New York City / Northern New Jersey metropolitan area to support commercial and residential building projects. This is a 1099 independent-contractor position only. We are looking for an established freelancer or independent professional with meaningful availability for ongoing project work. This is not intended as a moonlighting position for someone whose full-time employment will take priority over AEP projects. The right person will become a trusted recurring member of our extended project team and will be expected to take ownership of assigned work, meet commitments, and communicate proactively. Responsibilities Typical responsibilities may include: • Develop plumbing and fire-protection designs from architectural backgrounds, project criteria, and direction from AEP, • Develop domestic cold- and hot-water distribution systems, • Develop sanitary waste and vent systems, • Develop storm-drainage systems where applicable, • Develop natural-gas distribution systems where applicable, • Perform plumbing fixture-unit, water-demand, sanitary, storm, and gas-load calculations, • Size piping and related plumbing-system components, • Design domestic water-heating systems and select equipment, • Develop plumbing riser diagrams and schematics, • Coordinate plumbing requirements for architectural, mechanical, electrical, kitchen, specialty, and other equipment, • Develop fire-protection and sprinkler-system layouts where included in the project scope, • Determine applicable sprinkler design criteria, hazard classifications, design densities, coverage requirements, and system requirements, • Develop sprinkler head layouts, piping arrangements, risers, standpipes, and related fire-protection systems as applicable, • Develop fire-protection performance criteria and coordinated design drawings for delegated-design sprinkler systems where appropriate, • Perform or assist with sprinkler hydraulic calculations where required, • Review available water-supply information and identify when additional flow-test or utility information is required, • Coordinate fire-protection systems with architectural, structural, mechanical, electrical, fire alarm, and plumbing disciplines, • Prepare plumbing and fire-protection plans, schedules, risers, details, notes, and specifications, • Assist with equipment selections and technical product review, • Identify coordination conflicts and missing information before they affect the project, • Incorporate review comments and revisions, • Perform self-QA/QC before submitting work for AEP review, • Assist with responses to contractor, architect, and client technical questions as required What We Are Looking For We are looking for a designer, not simply a CAD operator. The ideal candidate can receive architectural backgrounds and project requirements, understand the design intent, determine what needs to be done, and independently develop coordinated plumbing and fire-protection designs without requiring every pipe, fixture connection, valve, sprinkler head, riser, and note to be individually marked up. Technical ability is important, but reliability, communication, and ownership are equally important to us. We are specifically looking for someone who: • Treats agreed project deadlines as firm commitments, • Does not place AEP projects on the back burner because another client becomes more urgent, • Communicates immediately if an issue could affect scope, schedule, or quality, • Proactively identifies missing information, coordination issues, design concerns, and potential problems, • Asks questions early rather than allowing uncertainty to become a last-minute issue, • Takes ownership of assigned work from start through completion, • Is receptive to feedback and willing to learn AEP's preferred design standards, procedures, and workflows, • Reviews their own work carefully before submitting it, • Communicates clearly and professionally, • Is reasonably available during normal U.S. business hours Qualifications • Professional experience designing plumbing systems for buildings, • Professional experience with fire-protection and sprinkler-system design, • Strong AutoCAD skills, • Experience producing permit and construction-document drawing sets, • Knowledge of domestic water, sanitary, vent, storm, natural gas, and domestic water-heating systems, • Experience performing plumbing sizing and demand calculations, • Working knowledge of sprinkler-system design, hazard classifications, densities, sprinkler coverage requirements, piping arrangements, and hydraulic principles, • Familiarity with standpipe systems and fire-service requirements where applicable, • Ability to distinguish between engineer-of-record design requirements and delegated sprinkler-contractor design responsibilities, • Ability to read and coordinate architectural and other engineering drawings, • Strong written and verbal English communication, • Ability to work independently and remotely, • U.S.-based, • Experience with commercial, multifamily residential, healthcare, retail, office, renovation, and/or new-construction projects is preferred, • Working knowledge of the IBC, IPC, applicable fuel-gas codes, NFPA 13, NFPA 13R, NFPA 14, and the NYC Building and Plumbing Codes is required. Candidates must understand the major code sections, know how they affect their design, when they apply, and know how to efficiently locate and interpret applicable code requirements when asked., • Familiarity with NYC fire-protection requirements and FDNY-related requirements is strongly preferred, • PE licensure is not required for this position Site Survey / Local Travel Requirement This is a remote freelance position, but candidates must be located within reasonable driving distance of AEP's primary New York/New Jersey project area and must be willing and able to travel to project sites as needed. Responsibilities may include: • Conducting existing-condition and due-diligence site surveys, • Documenting existing plumbing fixtures, piping, water services, sanitary and storm systems, gas services, sprinkler systems, standpipes, fire services, and related building conditions, • Taking field measurements, photographs, pipe-size information, equipment information, and utility information, • Identifying visible conflicts, deficiencies, and conditions that may affect the proposed design, • Organizing field notes and survey information for use in design, • Communicating significant field findings promptly to AEP Candidates must have: • Reliable transportation, • A valid driver's license, • Ability and willingness to travel to project sites in New Jersey, New York City, and surrounding areas, • Confidence working independently in occupied and unoccupied buildings, • Ability to conduct thorough, organized field surveys without requiring constant direction Software and Equipment Requirements As an independent contractor, you must provide and maintain your own: • Computer and related hardware, • Reliable high-speed internet connection, • AutoCAD software suitable for performing the required work, • Microsoft 365 software, including Word, Excel, Outlook/email, and other standard office applications, • Professional email and reliable phone/online communication capability, • Any other general software and equipment normally required to perform your freelance design work AEP does not provide computer hardware, Microsoft 365 licenses, AutoCAD licenses, or general office equipment for this independent-contractor position. Contractor Relationship This is a remote 1099 freelance independent-contractor relationship. Project workload will vary, and no minimum number of hours or projects is guaranteed. Our objective is to develop long-term relationships with strong freelance professionals who can become regular contributors to AEP projects as our workload continues to grow. Work will be assigned on a project or task basis, with scope, schedule, and compensation established for each assignment. To Apply Please submit your resume and briefly answer the following: • How many years of plumbing design experience do you have?, • How many years of fire-protection/sprinkler design experience do you have?, • Do you currently work as a freelancer or independent contractor?, • What types of building projects do you have the most experience designing?, • Are you able to independently develop plumbing designs from architectural backgrounds and project criteria?, • Are you able to independently develop sprinkler layouts and fire-protection design criteria?, • Do you perform sprinkler hydraulic calculations yourself?, • How familiar are you with NFPA 13, NFPA 13R, NFPA 14, and NYC plumbing/fire-protection requirements?, • What version of AutoCAD do you currently use?, • Approximately how much availability do you typically have each week?, • What hours are you generally available during the U.S. workday?, • Are you located in the United States?, • What is your typical hourly rate or preferred project-based compensation?\nCompany Description AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area. AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area.