Trabajos Construction & Trades en Huntsville, AlabamaCrear alertas

Job Description Title: Manufacturing Electrician Location: Huntsville, AL Position Status: Full-Time Work Schedule: Regular hours are 7:00 am to 4:00 pm Monday through Friday. Occasional overtime, evenings, or weekends may be required based on production demands. Position Summary The Electrician is responsible for installing, maintaining, testing, and repairing electrical wiring, fixtures, and systems within manufactured units. This role ensures electrical systems are properly connected, functional, and compliant with applicable specifications and electrical codes. The Electrician will work from blueprints and diagrams to support safe, reliable, and high-quality equipment builds. Essential Duties and Responsibilities Plan new or modified electrical installations to minimize material waste, allow for future maintenance, and ensure safe, reliable wiring in compliance with specifications and local electrical codes Interpret and follow electrical schematics, drawings, and blueprints to ensure proper wiring installation, including concealed wiring Pull wiring through units and connect electrical boxes to subcomponents Splice wires by stripping insulation, twisting or soldering connections, and applying appropriate insulation or terminal caps Connect wiring and power cables to electrical equipment, including control panels, pneumatic and hydraulic systems, and diesel motors Install grounding leads and ensure proper system grounding Test circuit continuity and electrical compatibility using diagnostic tools such as ohmmeters, oscilloscopes, batteries, and buzzers Monitor the operation of electrical systems to identify defects, safety concerns, or the need for repair or adjustment Troubleshoot and repair electrical components or systems as required May perform basic cutting or welding of steel components using approved equipment Perform other related duties as assigned Skills and Competencies • Ability to read and interpret blueprints and electrical diagrams, • Extensive knowledge of electrical systems and wiring methods, • Proficient in the use of hand tools, power tools, and electrical testing equipment, • Ability to work safely and effectively in a production environment Completion of a formal electrician apprenticeship preferred Valid electrician's license preferred • Must be capable of passing a drug screen, • Must be capable of passing a background check, • Must have strong organizational and planning skills and the ability to prioritize work, • Must be detail oriented with good analytical skills and ability to handle multiple tasks independently, • Must be able to work in a team environment, • Must have attention to detail and critical thinking skills, • Must demonstrate positive, polite, and professional behavior at all times when dealing with co-workers, customers, and all levels of management, • Must have the ability to communicate using clear, concise, and accurate English; both verbal and written are Required Physical Requirements: Work may involve sitting or standing for extended periods of time. Position may require typing and reading from a computer screen. Must have sufficient mobility to include but not limited to: bending, reaching, climbing, turning, and kneeling to complete daily duties in a timely and efficient manner. There is a possibility that due to parking availability and location of work, walking moderate to long distances may be required. Must be able to lift, move, and transport items frequently over 10 pounds. Work Environment: Generally, work is conducted in an inside office environment, but may also involve some outside work depending on the task. The inside environment may be in an office or cubicle with close quarters, low to moderate noise, and bright or dim lighting. Outside work may include various environmental conditions including warm and cold climates and while on travel. Axxeum, Inc. is an equal opportunity employer. The company will provide equal opportunity in employment to all employees and applicants for employment. No person will be discriminated against in employment because of race, religion, color, sex, age, national origin, disability, genetic information, military status, sexual orientation, gender identity or any other characteristic protected by applicable federal or state law. This policy applies to all terms, conditions, and privileges of employment and all policies of the company. At the time of hiring, employees are required to sign a written statement acknowledging that they are employed at the will of the company and are subject to termination at any time, for any reason, with or without notice, and with or without cause. Employees who do not have an individualized written employment contract or a collective bargaining agreement are employed at the will of the company and are subject to termination at any time, for any reason, with or without cause or notice. At the same time, these employees may terminate their employment at any time for any reasons.

Job DescriptionLicensed Electrician Vendors – Partner with Lessen About Lessen Lessen connects skilled trade businesses with a nationwide portfolio of residential and commercial properties. We handle the back-end operations—so you can focus on delivering quality work and growing your business. Opportunity Overview Lessen is actively seeking licensed Electrician vendors in the Huntsville, AL area to join our growing vendor network. This is not a W-2 employment opportunity. Vendors operate as independent businesses, maintaining complete control over their work schedules, staffing, and operations. Requirements - Active LLC or business entity in good standing - Valid Electrician license - Proof of general liability and workers’ compensation insurance - Ability to meet client quality and compliance standards - Reliable communication and commitment to timely service Why Partner with Lessen- Steady work pipeline: Access to exclusive projects across 100+ metro areas—no lead generation needed. - Streamlined operations: Scheduling, project management, and invoicing all handled in one platform. - Lower overhead: Reduce administrative time and costs through automated workflows and centralized job management. - Fast, reliable payments: Get paid within 30 days of batch invoicing—or as soon as the next business day with Early Pay. - Dedicated support: Our field and support teams help you navigate client requests and resolve issues quickly. - Vendor Marketplace: Access discounted materials, insurance options, and financing tools to help your business grow. Join the Lessen Vendor Network today: \uD83D\uDC49https://www.lessen.com/contact/become-a-vendor We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Job Title: Journeyman Electrician – Industrial & Residential Location: Athens, AL (Serving Huntsville Area) Pay: $15–$30 per hour About Dixie Electric Dixie Electric is a trusted provider of electrical services for industrial, commercial, and residential projects. Based in Athens, AL, we proudly serve the Huntsville area and surrounding communities. Our team values safety, quality, and reliability on every project. Join our growing company and help us deliver excellence to our clients. Job Summary We are seeking a skilled Journeyman Electrician to perform installations, maintenance, and repairs on industrial and residential electrical systems. The ideal candidate has experience with both high- and low-voltage systems, a strong understanding of the National Electrical Code (NEC), and the ability to read and interpret blueprints accurately. Key Responsibilities • Install, maintain, and repair electrical systems across industrial and residential job sites, • Conduct inspections to identify faulty wiring, equipment malfunctions, or safety hazards, • Diagnose and troubleshoot electrical problems using proper testing tools, • Ensure all work complies with local, state, and national electrical codes, • Collaborate with construction teams and interpret blueprints for accurate electrical layouts, • Operate hand tools, power tools, and specialized electrical equipment, • Assist with electrical installations requiring basic frame carpentry skills Qualifications • Proven experience as a Journeyman Electrician, • Strong knowledge of the National Electrical Code (NEC), • Ability to read and interpret blueprints accurately, • Experience with high- and low-voltage systems, • Basic frame carpentry skills, • Valid driver’s license What We Offer • Competitive pay: $15–$30/hour depending on experience, • Long-term, stable employment, • Opportunities for career growth and advancement, • Supportive, safety-focused work environment, • Hands-on training and development opportunities How to Apply If you are a dedicated Journeyman Electrician looking for a rewarding, long-term opportunity with a trusted team, we want to hear from you! Click Apply Now or submit your resume to join Dixie Electric and help power projects across the Huntsville area. #hc213233

Job Description*DOD Clearance is required* Summary: The Maintenance Electrican is responsible for all support operations pertaining to the usage and maintenance of equipment delivered at customer sites. They are the customer interface for HWX's on-site activities; they have strong communication and client service skills. They apply knowledge of electrical/electronics, PLC, pneumatic and mechanical principles in determining equipment malfunctions and restores equipment to operation. They support maintenance, production and factory equipment, and tooling in the customer’s facility. Duties and Responsibilities: • Perform all duties in a safe and collaborative manner and immediately report any potentially dangerous conditions or other safety concerns to the supervisor., • Start up and shuts down equipment in accordance with operation’s requirements, company safety procedures and OSHA requirements for machine activation and shutdown., • Provide technical support on PLC’s and network interfaces throughout the manufacturing floor., • Perform work requiring a thorough knowledge of electrical/electronic and mechanical theory and principles, written specifications, local and national electrical codes, properties of various materials, and principles of operation and application of electronic equipment., • Troubleshoot and repairs mechanical, hydraulic, pneumatic and electrical/electronic equipment including but not limited to PLC’s, numerical controls, power supplies, drives, gages/HMI and test equipment., • Receive wiring diagrams, drawing, specification, and instructions, both verbally or in writing, concerning emergency and scheduled repair, installation, and inspection work to be performed., • Plans details of working procedures to determine material or replacement needs and determines a logical approach to repair problems., • Service electronic equipment by checking, testing, and replacing faulty components, circuit modules, printed circuit boards and similar electronic devices., • Perform plant-wide electronic and electrical maintenance making operating adjustment as required., • Maintain and install communication cables, power distribution cables and wiring, and performs splicing as required., • Promote and comply with good safety practices and habits, including but not limited to, use of all PPE., • Provides technical assistance (interpretation of drawings, recommendation of construction methods and equipment, etc.) as required, including mechanical, electrical, plumbing and fire protection., • Ensure HWX is operating and following intent of maintenance contract., • Maintain relationships with internal and external clients., • Develop and maintain site logistics plan with customer, • Attend and participate in project meetings with customer, • Perform other duties as assigned. Education and Work Experience: • Technician Certification or Associates degree in related field required., • Five or more years’ experience with PLC’s and HMI controlled processes., • OSHA Certification preferred., • Thorough understanding of controls software in an automated environment. Work Authorization/Security Clearance Requirements: • Secret clearance is required. Knowledge, Skills and Abilities: List of needed knowledge, skills, and abilities to successfully accomplish the duties and responsibilities of the job. • Performs routine maintenance on equipment and determine when and what kind of maintenance is needed., • Reads and understands blueprints, schematics, and/or measuring devices., • Behaves consistently and predictably; is reliable, responsible and dependable in fulfilling obligations and diligently follows through on commitments and consistently meets deadlines., • Achieves thoroughness and accuracy when accomplishing a task through concern for all the areas involved., • Clear and effective communication skills in both written and spoken forms., • Understands how to use the computers, including such tasks as turning the computer on and off, locating and opening files, navigate to websites, perform searches, and download files., • Knowledge of computer applications including email, databases, word-processing program and spreadsheets (such as Microsoft Office)., • Respond and follow up to a customer’s inquiry or problem in a timely and effective manner., • Identifies problems and review relevant information to develop options, then implement the solutions., • Works effectively with different levels of management, team members and customers. Work Conditions: Environment Type: • Indoors. Production and office environment. Temperature controlled, unless products and/or equipment is located outdoors.Exposure Types:, • Cuts and/or burns, • Dirt, dust, grease and/or oil, • Noisy environmentWork Hours:, • Standard work schedule, overtime may be necessary for meeting deadlines, required travel, and emergent conditions.Travel Requirements:, • Remote - perform job responsibilities from customer work sites. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Please see Human Resources for detained information for each physical demand. • Ascending or descending ladders, stairs, scaffolding, ramps, poles and the like, using feet and legs and/or hands and arms., • Medium work that includes moving objects up to 50 pounds., • Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another. Safety - HWX enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements. All employees that work in or enter the production environment are required to wear personal protective equipment. Quality - It is our policy to provide quality products and services that meet customer expectations and delivery requirements. Accordingly, each employee must conform to the HWX Quality Policy and carry out job activities in compliance with applicable HWX Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities. Procedure Compliance - Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to his/her job. Security Clearance Statement - This position may require a government security clearance; you must be a US Citizen for consideration. ITAR Requirements - To conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at HWX must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158. Equal Employment Opportunity - HWX is proud to be an Equal Opportunity Employer and is committed to attracting, retaining, and developing a highly qualified, diverse, and dedicated work force. HWX hires and promotes people based on their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that nurtures trust, equality, and teamwork, in which all employees recognize and appreciate the diversity of individual team members. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, gender, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law.

Job DescriptionDescription: Stones River Electric is seeking a Lighting Technician to support our growing national operations, offering competitive hourly rates based on experience. We are seeking an experienced Commercial Lighting & Electrical Technician with 2–3 years of hands-on field experience. This role focuses on the installation, preventive maintenance, and troubleshooting of commercial and industrial lighting systems, controls, and associated electrical branch circuits. Requirements: • 2-3 years Experience with commercial lighting systems and repairs, • Ability to lift up to 50 pounds, climb ladders, and comfortable with heights, • High School Diploma or GED required, • Strong troubleshooting and problem-solving skills, • Ability to work independently and manage workload in the field, • Comfortable using basic technology (iPad, etc.), • Good communication skills, • Valid driver’s license with acceptable driving record, • Must pass drug screen, background check, and MVR Tools Required: • Basic electrical hand tools including meter, pliers, wire strippers, and tape measure What We Provide: • Company gas card, and company credit card, • Equipment provided, • Phone reimbursement Benefits: • Medical, dental, and vision insurance, • Paid holidays and vacation, • 401k with company match, • Sign-on and referral bonuses after 90 days, • Anniversary bonus TLC Investments DBA Stones River Electric is an equal opportunity employer. Unsolicited submissions or outreach from third-party agencies or recruiters will not be considered. We will engage only with approved recruiting partners who have an active, written agreement with our organization for this specific position.

Job Description Lula is looking for a 1099 Electrical Repair Pro to help with property maintenance of several thousand rental properties across the Huntsville area. We are seeking individuals who have experience in the rental property industry and has an eager attitude. What is Lula? Lula is a service designed for property managers to eliminate the hassle of managing and coordinating maintenance, improve the resident experience, and reduce maintenance costs for property owners. Lula works hand-in-hand with our service-provider partners to ensure everyone gains. Unlike other platforms, Lula has been designed from the ground up to work with your needs and answer your concerns. Whether you are a mom-and-pop small business or an international corporation, there are many reasons why joining the Lula Network is a good idea for your company. Apply Here: https://lula.life/become-a-provider/huntsville BENEFITS WITH LULA: -Lula delivers real jobs, not leads -Set your own hourly rates -24/7 phone and text support for Lula Pros -New jobs available daily -Choose only the jobs you want -Paid for labor and parts within 1-3 days REQUIREMENTS: -Must be 18 or older -Must have General Liability Insurance -No felonies within the past 7 years -Be friendly, respectful, and punctual -Must provide your own tools and materials -Must complete vendor onboarding and be approved Job Type: Contract Please email pro@lula.life with any questions

Job Description Purpose and Scope: The purpose of this position is to perform the full range of a journeyman electrician level duties. Essential Responsibilities: 1) Installs, modifies, repairs, maintains, troubleshoots loads and tests new and installed equipment including secondary distribution lines and circuits used to supply distribution panels, switch gear, power and control circuits, electrical intrusion alarms, and cathodic protection systems. 2) Knowledgeable of high intensity lighting systems, and related equipment. 3) Working from building plans, blueprints, wiring diagrams, and determines the routing placement, type, size, gauge, balance load, continuity, and safe operation of electrical lines, circuits, systems, equipment, and controls. 4) Skilled in installing underground cable and conduit, running overhead wire and conduit to attach cross arms making electrical connection by splicing and/or other methods. 5) Ability to install home and industrial services by running wires from pole to entrance weatherhead. 6) Ability to install street lighting circuits, lamps, and related hardware. 7) Determines size, type and gauge of wiring coupling, conduits, relays, etc., effects necessary repairs and modifications. 8) Must know and apply the principles, materials, and safety standards applicable to the electrical trade: including interpretation of plans, blueprints and engineering designs: use of tools and test equipment and ability to plan and competently accomplish assigned duties. 9) Connects single phase, three phase, and variable speed motors ranging from fractional horsepower up to 150 horse power. 10) Calculates motor protection in control circuits, and determines overload sizes and required phase protection. 11) Troubleshoots sub panels to determine and correct load balance on phases. 12) Tests electrical circuits for resistance, current, and potential difference. Perform all other position related duties as assigned or requested. Minimum Position Knowledge, Skills, and Abilities Required: Associates degree (A.A.) or equivalent from two year college or technical school; four (4) years related experience and/or training; or equivalent combination of education and experience. Must possess a journeyman certificate through the union. Must maintain a valid state driver license and be qualified to operate Company vehicle. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

Job Description Electrician Location: Huntsville, AL Job Type: Full-Time Department: Operations Reports to: Engineering About Us At Sun Test Systems, we set out to build high quality ground support equipment that meets today and the future soldier’s requirements utilizing leading technology to secure performance without compromising quality. Our future vision is to be recognized in the USA as providing advanced ground support equipment to all branches of the military through an organization with the highest level of integrity and never sacrifice quality of our products. We want to be widely recognized for standing behind our products and our commitments to the satisfaction of the customer. Position Summary The Electrician position is responsible for the electro-mechanical installation, assembly, and integration of subassemblies for a variety of products. This role will build, route, install, and assemble electrical and electro-mechanical components using a variety of hand tools, power tools, and specialized equipment. The position requires the ability to interpret drawings, schematics, and work instructions while ensuring assemblies are completed accurately and meet established quality and workmanship standards. Responsibilities • Follows diagrams or blueprints, ensuring wiring is installed correctly in the unit, • Crimps, cuts, and routes wiring within the unit, • Splicing, soldering, terminating of single and multicore wires, • Experience with electrical control panel assembly and troubleshooting, • Experience with aircraft/military style connectors and harnesses, • Connects power cables to equipment, such as control panels, pneumatic and hydraulic systems, or diesel motor, and installs grounding leads, • Tests continuity of circuit to ensure electrical compatibility and safety of components, using testing instruments, such as ohmmeter, battery and buzzer, and oscilloscope, • Observes the functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement, • May repair faulty equipment or systems, • Adhere to NEC and IEC standards for proper building/installation of wires, • Performs other related duties as assigned Skills & Competencies Must be a U.S. citizen • Ability to read schematics, drawings, and work instructions, • Extensive knowledge of electrical systems and wiring, • Ability to use hand and power tools, • Proficient in the use of test meters and other diagnostic equipment, • Excellent analytical and problem-solving skills, • Certified Soldering Certification a plus, • Electrical Termination Certification (IPC/WHMA-A-620) a plus Qualifications • High School diploma or equivalent, • Associate’s degree or Certificate in Electrical Technology a plus, • Completion of a formal apprenticeship and valid electrician’s license a plus Physical Requirements • While performing the duties of this job, the employee is regularly required to stand, walk, sit for extended periods of time, and reach with hands and arms, • Specific vision abilities required by this job include ability to adjust focus, • Must be able to see color to discern color-coded wiring, • Prolonged periods standing, kneeling, bending, and climbing ladders, • Must be physically capable of pulling wires and cables through conduits, • Must be able to lift up to 50 pounds at a time Working Conditions The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • The above statements reflect general details necessary for the performance of the job and are not to be considered an all-inclusive list. Sun Test Systems, Inc. is a federal contractor and EEOC/Title VII/ADA compliant employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Overview: Signalink a dynamic, small defense contractor committed to excellence in providing advanced defense solutions. We are seeking a detail-oriented and proactive Aircraft Electrician to join our team. Responsibilities and Duties: • Perform aircraft electrical installation, modification, maintenance, and troubleshooting activities in support of U.S. Army aviation programs., • Fabricate, assemble, install, modify, and repair aircraft electrical wiring, wire harnesses, cable assemblies, and electrical interconnects in accordance with engineering drawings, wiring diagrams, technical data, and applicable standards., • Perform aircraft electrical installations, including routing, securing, terminating, and connecting wiring, harnesses, connectors, electrical components, and associated hardware., • Build and install wire harnesses and cable assemblies using approved materials, tooling, techniques, and workmanship standards., • Perform crimping, soldering, splicing, pinning, depinning, connector assembly, terminal installation, and other electrical fabrication activities as required., • Interpret and work from electrical schematics, wiring diagrams, engineering drawings, installation drawings, technical manuals, wire lists, and other technical data., • Support aircraft modification and system integration activities by installing new or modified electrical and avionics equipment and associated wiring., • Perform electrical continuity, insulation resistance, polarity, and other applicable testing to verify proper installation and system functionality., • Troubleshoot aircraft electrical systems and wiring to identify faults, shorts, opens, poor connections, damaged wiring, connector issues, and other electrical problems., • Use electrical test equipment, including digital multimeters and other applicable diagnostic tools, to isolate faults and support corrective actions., • Support engineering and technical teams during installation, testing, troubleshooting, and validation of aircraft electrical systems., • Identify installation discrepancies, workmanship issues, and potential safety concerns and communicate findings to engineering and program leadership., • Maintain accurate installation, inspection, testing, and troubleshooting documentation in accordance with program and customer requirements., • Follow applicable aircraft maintenance practices, technical data, safety procedures, and quality requirements., • Maintain a clean, organized, and safe work environment and properly maintain tools, equipment, materials, and work areas., • Work effectively with electricians, engineers, technicians, mechanics, and other multidisciplinary team members to complete aircraft modification and integration activities. Requirements and Qualifications • High school diploma or equivalent required; technical school, vocational training, or military technical training in aircraft electrical systems preferred., • 3–7 years of relevant experience in aircraft electrical work, avionics installation, aircraft modification, electrical systems integration, or a related field., • Demonstrated experience fabricating and installing aircraft wiring, wire harnesses, cable assemblies, and electrical interconnects., • Demonstrated ability to interpret electrical schematics, wiring diagrams, engineering drawings, installation drawings, wire lists, and technical data., • Hands-on experience with aircraft electrical installation and modification activities., • Experience with wire termination, crimping, soldering, splicing, connector assembly, pinning, and depinning., • Experience troubleshooting aircraft electrical systems using appropriate test equipment and diagnostic methods., • Ability to work from detailed technical instructions while maintaining high standards for workmanship, accuracy, and quality., • Ability to work independently and effectively within a multidisciplinary team environment., • Strong attention to detail and ability to identify wiring, installation, and workmanship discrepancies., • Proficiency with Microsoft Office applications, including Word, Excel, and Outlook., • Active Secret clearance or ability to obtain and maintain a Secret clearance., • Up to 10% travel. Preferred Experience and Knowledge • Experience supporting U.S. Army aviation programs or other DoD aircraft modification and sustainment programs., • Experience working on rotary-wing aircraft, particularly UH-60 or other Army aviation platforms., • Familiarity with Army aviation technical manuals, aircraft wiring diagrams, wiring data modules, installation instructions, and other controlled technical data., • Familiarity with aircraft electrical standards, wire identification requirements, connector systems, shielding, grounding and bonding, and wire routing practices., • Experience with aircraft modification work orders, engineering change documentation, technical data packages, or installation kits., • Experience with aircraft electrical troubleshooting, fault isolation, and functional testing., • Familiarity with aircraft airworthiness and quality requirements., • Experience working in a government or defense contractor environment., • Experience working alongside engineers and supporting engineering-led aircraft modification and system integration efforts., • Familiarity with aircraft electrical inspection and workmanship standards. What We Offer: Our industry-leading benefits package goes above and beyond competitive salary commensuration for those just beginning their career and seasoned professionals alike. Our comprehensive benefits package includes full coverage medical insurance, multiple retirement plan options, short and long term disability, life insurance, and work/life benefits including career development and recognition programs. Other perks we offer are flexible work schedules, company-sponsored events, and educational assistance. Disability Accommodation for Applicants: Signalink, Inc. is an Equal Employment Opportunity employer and provides reasonable accommodation for qualified individuals with disabilities and disabled veterans in its job application procedures. If you have any difficulty using our online systems and need accommodation due to a disability, you may use the following alternative email address to contact us about your interest in employment at hrsupport@sgi-hq.us. Company Overview: Founded in 2005, Signalink is an SBA certified Service Disabled Veteran Owned Small Business (SDVOSB) specializing in Engineering Design and Development, Prototyping, and Systems Integration to the Department of Defense, Aerospace, and Commercial Industries. AS9100D with ISO 9001:2015 certified with a commitment to excellence, Signalink provides the very best Information Engineering, Technical Solutions & Services and Operations support to our customers cost effectively and efficiently. We will accomplish everything we do in an ethical, honest, and professional manner. Signalink, Inc., provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit, based factors

Job Description We are seeking Plumbers and Pipefitters to support commercial construction projects by installing mechanical piping and plumbing systems. We offer Comprehensive Benefits • Competitive pay and incentives • Medical, Vision, Dental Job Duties • Commercial plumbing installation from underground/rough-ins, stack out to trim outs on large scale commercial projects, • Install hangers and supports for pipes, equipment, and fixtures prior to installation for water, gas, compressed air, medical gas, or other liquids., • Interpret blueprints and building specifications required for each job site., • Use of copper, steel, cast iron, PVC, CPVC, PEX, and other piping., • Duties could include setting grease traps, decontamination tanks, oil interceptors, lint interceptors, and utility hookups, etc. Requirements • 5 + years of commercial plumbing and/or pipefitting experience, • Ability to read blueprints and shop drawings, • Possess hand tools and trade-specific tool, • Ability to direct the work of an apprentice or helper, • Able to work from ladders and man lifts from various heights and operate the equipment as needed \nCompany Description We offer an extensive network of professionals, developed over 50 years of combined experience. Our business structure is simple - there is no bureaucracy to struggle with. We offer an extensive network of professionals, developed over 50 years of combined experience. Our business structure is simple - there is no bureaucracy to struggle with.

Job Description Refrigeration Assembly Technician Location: Huntsville, AL Job Type: Full-Time Department: Operations Reports to: Operations Manager About Us At Sun Test Systems, we set out to build high quality ground support equipment that meets today and the future soldier’s requirements utilizing leading technology to secure performance without compromising quality. Our future vision is to be recognized in the USA as providing advanced ground support equipment to all branches of the military through an organization with the highest level of integrity and never sacrifice quality of our products. We want to be widely recognized for standing behind our products and our commitments to the satisfaction of the customer. Position Summary The Refrigeration Assembly Technician at Sun Test Systems is responsible for assembling refrigeration systems and sub-assemblies using mechanical assembly and copper tubing fabrication techniques. This role requires proficiency in cutting, bending, fitting, brazing, and soldering copper tubing used in refrigeration and HVAC assemblies. The technician ensures all assemblies meet quality, performance, and safety standards while following drawings, schematics, and work instructions. Responsibilities • Performs mechanical assembly of refrigeration components including compressors, condensers, evaporators, receivers, valves, and line assemblies., • Reads and interprets refrigeration schematics, mechanical blueprints, and assembly work instructions., • Cuts, bends, routes, and fits copper tubing for refrigeration systems using manual and powered tools., • Performs brazing and soldering of copper tubing and joints per refrigeration and HVAC standards., • Installs and secures refrigeration and mechanical components using proper fasteners, brackets, and mounting hardware., • Performs pressure testing, leak detection, and functional checks., • Ensures assemblies meet quality, cleanliness, and workmanship requirements., • Maintains accurate job documentation and material usage records., • Follows all safety standards including safe operation of torches, nitrogen purging, and handling of pressurized materials., • Collaborates effectively with supervisors, engineers, and team members., • Other duties may be assigned. Skills & Competencies • Must be a U.S. citizen., • Mechanical assembly experience with refrigeration, HVAC, or related mechanical systems., • Skilled in copper tubing fabrication including cutting, bending, flaring, and fitting., • Proficient in brazing and soldering copper refrigeration lines., • Ability to read and understand technical drawings, schematics, and mechanical instructions., • Strong attention to detail with high-quality workmanship., • Effective communication and teamwork skills., • Ability to lift up to 50lbs and work in physically active environments. Qualifications • High School Diploma or GED required., • 1–3 years of refrigeration, HVAC, copper tubing fabrication, or mechanical assembly experience preferred., • Brazing certification (if applicable) is a plus. Physical Requirements • While performing the duties of this job, the employee is regularly required to stand, walk, sit for extended periods of time, and reach with hands and arms, • The employee frequently is required to use hands to finger, handle, or feel and talk or hear, • Specific vision abilities required by this job include ability to adjust focus, • Must be able to see color to discern color-coded wiring, • Prolonged periods standing, kneeling, bending, and climbing ladders, • Must be physically capable of pulling wires and cables through conduits, • Must be able to lift up to 50 pounds at a time Working Conditions The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work performed in a shop environment with exposure to moving mechanical parts, moderate noise, and hot-work conditions such as brazing. PPE is required. • The above statements reflect general details necessary for the performance of the job and are not to be considered an all-inclusive list. Sun Test Systems, Inc. is a federal contractor and EEOC/Title VII/ADA compliant employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Paid time off, • Stock options plan Our client is seeking a full-time Electrical Assembly Lead for their Huntsville shop. This person will run day-to-day electrical assembly work: assign jobs, set priorities, check workmanship, keep travelers accurate, and keep the crew on schedule. They will build electrical assemblies on schedule, document the work, and meet quality standards on every job. The role requires close attention to detail, the ability to lead the electrical assembly team, and experience training junior technicians. RESPONSIBILITIES • Lead daily electrical assembly work in the shop, including job assignment, priorities, and status., • Review incoming work packages for drawings, BOMs, revisions, and missing information before the job hits the bench., • Check in-process and completed cables, harnesses, and assemblies for workmanship and drawing compliance., • Train technicians on build methods, tooling, ESD, FOD, travelers, and quality expectations., • Keep multiple jobs moving and raise schedule, parts, or quality risks to management early., • Maintain project routers and shop records so configuration and status are accurate., • Enforce AS9100, ESD, FOD, tool-control, and shop safety practices., • Build cables, wire harnesses, and related electrical assemblies from manufacturing orders, drawings, engineering changes, customer specifications, and process instructions., • Cut, strip, route, crimp, solder, terminate, and label wiring; install heat shrink, boots, backshells, and other protective hardware., • Test completed assemblies for continuity, shorts, and grounds., • Integrate finished harnesses into assemblies, enclosures, or equipment racks as required.REQUIRED QUALIFICATIONS, • High school diploma., • 5+ years building cables, wire harnesses, or aircraft/avionics electrical assemblies in a production shop., • Experience with both crimp and solder harness work., • Ability to read drawings, schematics, wiring diagrams, work instructions, and bills of material., • Working knowledge of IPC standards, including J-STD-001 and IPC-A-610., • Must possess IPC/WHMA-A-620 certification., • Familiarity with IPC, J-STD, SAE AS, and MIL specifications used in defense/aerospace harness work., • Ability to use basic electronic test equipment, including multimeters and insulation testers., • Strong attention to detail and consistent workmanship., • Ability to work with shop teammates and keep documentation accurate., • Proficiency in English (written and spoken)., • Must be a U.S. citizen., • Must currently possess an active DoD Secret clearance or higher.PREFERRED QUALIFICATIONS, • J-STD-001 and/or IPC-A-610 certification., • Harness or solder experience to IPC Class 3., • Experience in an AS9100 aerospace or defense shop., • Familiarity with analog and digital electronics., • Experience with aircraft or airframe electrical modifications., • A&P or other aviation/avionics certification., • Military or DoD electrical/avionics background., • Familiarity with aircraft wiring practices such as SAE AS50881., • Use of an oscilloscope, signal generator, or similar test equipment.BENEFITS AND PERKS, • Industry-competitive compensation package., • Company performance-based bonus plan., • Equity stock-based compensation package., • Employer-funded comprehensive health, vision, and dental insurance for employees and dependents., • 401k with company match., • PTO and holiday pay., • Employer-funded life and disability insurance coverages.This position is subject to pre-employment background check.

Job Description Amtec Solutions Group (ASG) is looking for talented people with a good work ethic to join our team. We offer a positive, flexible, and challenging work environment and a comprehensive benefits package including health insurance, paid time off and holidays, 401k, etc. Learn about us and apply at www.AmtecSolutionsGroup.com to join the team! Amtec Solutions Group (ASG) is headquartered in Huntsville, AL and proud to be an Alabama manufacturer offering Robotic Manufacturing Solutions, Precision CNC Machining Services, Manufactured Assemblies Integration, and the MiniTec T-Slotted Aluminum Profile System! We provide these solutions to a broad industry base of other manufacturers and service providers in Huntsville, AL and throughout the southeastern Unites States. The industries we support include aerospace & defense, medical, steel, nuclear, automotive, general manufacturing, and research & development. Job Summary: The Mechanical Assembler, working under supervision, will participate in the manufacturing of custom designed factory automation equipment and other fabricated assemblies. Candidate must be able to read technical drawings, understand technical direction, and safely complete assigned tasks both independently and working as a team. Candidate is expected to ask questions to ensure understanding if needed. A variety of tasks will be assigned that support activities to be completed, per the manufacturing schedule. Candidate will be responsible for maintaining an organized and tidy workspace, including spaces where parts and equipment are stocked and stored. Candidate may also support other activities in the company's manufacturing operations. Occasionally travel to customer locations will be required and may include overnight and multi-day trips. Qualifications: ASG team members must have a good work ethic, be teachable, and be a good team player. Having a solutions-oriented mindset with a positive attitude, a strong desire to learn and improve, and a willingness to ask questions and seek help when needed is important. Additionally, applicants for this position: • 1 year in an industrial / manufacturing environment preferred, • High School diploma or GED, • General knowledge of and ability to use common hand and power tools such as hammers, drills, and wrenches., • Read and interpret technical drawings and the written instructions of designers and engineers, • Ability to work in a team-based manufacturing environment, • Capability to follow instructions precisely and take direction, • Intense focus on always ensuring a safe working environment - Reports unsafe conditions, • Willingness to work overtime, possibly on weekends and holidays, • Some occasional overnight travel will be required, • A strong sense of urgency and self-discipline, • Must be able to listen to, speak, read, write and understand English proficiently, • Must be able to pass a drug screen and background check, • Must have and maintain a valid driver's license, • Must be a U.S. Citizen Amtec Solutions Group (ASG) is an Equal Opportunity / Affirmative Action Employer and maintains a Drug Free Workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other status protected under federal, state, or local law. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs.

Job Description Electrical Assembler Location: Huntsville, AL Position Status: Fulltime Work Schedule: Regular hours are Monday - Thursday between the hours of 6:00 - 4:00 pm. Employees may need to adjust work hours during surge situations. Hybrid/ remote is not considered. Brief Job Description: The Electrical Assembler fabricates complex harness and enclosure products according to specifications and within operating budget. Duties and Responsibilities: • Assembles electrical & electronic components, wiring harnesses, equipment racks, mechanical devices, and other electrical assemblies & subassemblies., • Manufactures electronic/electrical circuitry, electronic components (CCA's), and wiring harnesses according to Manufacturing Orders (M.O.), Drawings, Engineering Changes, Customer Specifications, and Process Instructions (P.I.)., • Loads, solders, and touches up and reworks PCBA's., • Produces products to required specifications and within budget., • Operates automatic stripping, crimping, wire cutting, and basic test equipment., • Integrates and tests sub-assemblies and/or final assemblies following blueprints, drawings, diagrams, and test procedures., • Troubleshoot, diagnose, and correct malfunctions by modification, rework, repair, and/or maintenance., • Performs minor setup of noncomplex equipment., • May be required to assist with soldering on occasion., • May complete rework on assemblies and/or systems as a result of testing., • Maintains clean and safe working environment in line with company policies., • Adheres to all company standards, policies, and procedures., • Assists and oversees lower-level technicians., • Performs other tasks as needed. Education, Experience and Qualifications: • Must have a high school diploma or equivalent., • Must have at least five (5) years of high reliability manufacturing experience; defense/aerospace manufacturing experience is highly desired., • Must be capable of passing background check., • Must be capable of passing a drug screen., • Must be familiar with working under AS 9100., • Current or previous IPC-620 & IPC-610 or J-STD-001 certified., • Must be familiar with and understands IPC, J-STD, AS and MIL specifications as they relate to Defense/Aerospace requirements in CCA's and Harness build., • Must have knowledge of lean manufacturing, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods., • Must understand ESD processes., • Must be experienced in cable harness build - both crimp and solder., • Must have harness fabrication and enclosure integration experience., • Must have experience with specifications required to produce products in a defense/aerospace manufacturing environment., • High level attention to detail., • Ability to troubleshoot basic problems., • Must be versed in inspection techniques and specifications interpretation., • This position requires basic knowledge of "build to print" operations., • Must demonstrate positive, polite, and professional behavior at all times when dealing with co-workers, customers, and all levels of management., • Must have the ability to communicate using clear, concise, and accurate English; both verbal and written are Required. Preferred Experience: • Basic computer skills such as Windows, Microsoft Office, etc., • Ability to recommend process changes within the scope of procedures and policies to facilitate production goals., • Ability to assist other technicians with understanding drawings, specifications, and standards., • Ability to write Manufacturing Orders from drawings., • Costpoint Deltek experience desired. Physical Requirements: Work may involve sitting or standing for extended periods of time. Position may require typing and reading from a computer screen. Must have sufficient mobility to include but not limited to bending, reaching, climbing, turning, and kneeling to complete daily duties in a timely and efficient manner. Walking moderate to long distances may be required. Must be able to lift/carry/push/pull/move items frequently over 20 pounds. Occasionally required to lift/carry/push/pull/move heavy objects up to 50 pounds. Work Environment: The environmental characteristic for this position is an aircraft hangar, warehouse setting and outdoors. Candidates should be able to adapt to environments listed. There may be exposure to high noises, exposure to chemicals and cleaning agents, and Personal Protection Equipment may be required for certain tasks. This position must be able to work comfortably outdoors and may be exposed to hot/cold, wet/humid, and dry/arid conditions. Axxeum, Inc. is an equal opportunity employer. The company will provide equal opportunity in employment to all employees and applicants for employment. No person will be discriminated against in employment because of race, religion, color, sex, age, national origin, disability, genetic information, military status, sexual orientation, gender identity or any other characteristic protected by applicable federal or state law. This policy applies to all terms, conditions, and privileges of employment and all policies of the company. At the time of hiring, employees are required to sign a written statement acknowledging that they are employed at the will of the company and are subject to termination at any time, for any reason, with or without notice, and with or without cause. Employees who do not have an individualized written employment contract or a collective bargaining agreement are employed at the will of the company and are subject to termination at any time, for any reason, with or without cause or notice. At the same time, these employees may terminate their employment at any time for any reasons. A background check and drug screen is required for this position.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Paid time off, • Stock options plan, • Training & development Our client is hiring a full-time Electrical Assembly Technician for their Huntsville shop. This person will be part of the production team and will build electrical assemblies on schedule, document the work, and meet quality standards on every job. The role requires close attention to detail, a willingness to learn, and the ability to support teammates on the shop floor. It is a good fit for someone interested in avionics and aircraft electrical systems. RESPONSIBILITIES • Build cables, wire harnesses, and related electrical assemblies from manufacturing orders, drawings, engineering changes, customer specifications, and process instructions., • Read drawings, specifications, part numbers, markings, and workmanship requirements., • Pull the correct wires, connectors, and hardware from the bill of material by part number, quantity, and revision., • Cut, strip, route, crimp, solder, terminate, and label wiring., • Install heat shrink, boots, backshells, and other protective hardware., • Use shop tools such as strippers, crimpers, soldering irons, hand tools, and torque tools., • Test completed assemblies for continuity, shorts, and grounds., • Integrate finished harnesses into assemblies, enclosures, or equipment racks as required., • Complete travelers and shop records., • Follow AS9100, ESD, FOD, tool-control, and shop safety practices., • Flag drawing, parts, or workmanship issues to leads and management.REQUIRED QUALIFICATIONS, • High school diploma or GED., • 2+ years building cables, wire harnesses, or aircraft/avionics electrical assemblies in a production shop., • Experience with both crimp and solder harness work., • Ability to read drawings, schematics, wiring diagrams, work instructions, and bills of material., • Working knowledge of IPC standards, including J-STD-001, IPC-A-610, and IPC-A-620., • Familiarity with IPC, J-STD, SAE AS, and MIL specifications used in defense/aerospace harness work., • Ability to use basic electronic test equipment, including multimeters and insulation testers., • Strong attention to detail and consistent workmanship., • Ability to work with shop teammates and keep documentation accurate., • Proficiency in English (written and spoken)., • Must be a U.S. citizen., • Must currently possess an active DoD Secret clearance or higher.PREFERRED QUALIFICATIONS, • Current or previous IPC/WHMA-A-620 certification., • J-STD-001 and/or IPC-A-610 certification., • Harness or solder experience to IPC Class 3., • Experience in an AS9100 aerospace or defense shop., • Familiarity with analog and digital electronics., • Experience with aircraft or airframe electrical modifications., • A&P or other aviation/avionics certification., • Military or DoD electrical/avionics background., • Familiarity with aircraft wiring practices such as SAE AS50881., • Use of an oscilloscope, signal generator, or similar test equipment.BENEFITS AND PERKS, • Industry-competitive compensation package., • Company performance-based bonus plan., • Equity stock-based compensation package., • Employer-funded comprehensive health, vision, and dental insurance for employees and dependents., • 401k with company match., • PTO and holiday pay., • Employer-funded life and disability insurance coverages.This position is subject to pre-employment background check.

Job Description The Assembly Technician II independently performs a broader range of mechanical and electrical assembly tasks with minimal supervision. This role requires demonstrated technical competency, the ability to interpret schematics, and consistent delivery of quality work across moderately complex assemblies. Key Responsibilities • Assemble mechanical and electrical components using drawings, schematics, and work instructions, • Read and interpret blueprints, schematics, and technical specifications, • Assemble simple electronic components and subassemblies, • Use hand tools and measurement tools (e.g., calipers) accurately, • Troubleshoot and resolve basic assembly issues and escalate complex problems as needed, • Perform quality checks to ensure assemblies meet specifications, • Maintain a safe, clean, and organized work environment, • Follow all prescribed safety regulations and company policies, • Perform other related duties as assigned Required Skills & Qualifications • High School diploma or GED preferred, • Demonstrated experience assembling mechanical and electrical components, • Ability to read schematics and technical drawings, • Working knowledge of measurement tools and tolerances, • Ability to work independently with minimal supervision, • Strong attention to detail and quality Experience Level • Typically 2–4 years of relevant assembly experience or demonstrated equivalent competency Level of Supervision Works with minimal supervision

Job Description FMS Aerospace is hiring a full-time Electrical Assembly Technician for our Huntsville shop. This person will be part of the production team and will build electrical assemblies on schedule, document the work, and meet quality standards on every job. The role requires close attention to detail, a willingness to learn, and the ability to support teammates on the shop floor. It is a good fit for someone interested in avionics and aircraft electrical systems. Responsibilities • Build cables, wire harnesses, and related electrical assemblies from manufacturing orders, drawings, engineering changes, customer specifications, and process instructions, • Read drawings, specifications, part numbers, markings, and workmanship requirements, • Pull the correct wires, connectors, and hardware from the bill of material by part number, quantity, and revision, • Cut, strip, route, crimp, solder, terminate, and label wiring, • Install heat shrink, boots, backshells, and other protective hardware, • Use shop tools such as strippers, crimpers, soldering irons, hand tools, and torque tools, • Test completed assemblies for continuity, shorts, and grounds, • Integrate finished harnesses into assemblies, enclosures, or equipment racks as required, • Complete travelers and shop records, • Follow AS9100, ESD, FOD, tool-control, and shop safety practices, • Flag drawing, parts, or workmanship issues to leads and management Required qualifications • High school diploma or GED, • 2+ years building cables, wire harnesses, or aircraft/avionics electrical assemblies in a production shop, • Experience with both crimp and solder harness work, • Ability to read drawings, schematics, wiring diagrams, work instructions, and bills of material, • Working knowledge of IPC standards, including J-STD-001, IPC-A-610, and IPC-A-620, • Familiarity with IPC, J-STD, SAE AS, and MIL specifications used in defense/aerospace harness work, • Ability to use basic electronic test equipment, including multimeters and insulation testers., • Strong attention to detail and consistent workmanship, • Ability to work with shop teammates and keep documentation accurate, • Proficiency in English (written and spoken), • Must be a U.S. citizen, • Must currently possess an active DOD Secret clearance or higher. Preferred qualifications • Current or previous IPC/WHMA-A-620 certification, • J-STD-001 and/or IPC-A-610 certification, • Harness or solder experience to IPC Class 3, • Experience in an AS9100 aerospace or defense shop, • Familiarity with analog and digital electronics, • Experience with aircraft or airframe electrical modifications, • A&P or other aviation/avionics certification, • Military or DoD electrical/avionics background, • Familiarity with aircraft wiring practices such as SAE AS50881, • Use of an oscilloscope, signal generator, or similar test equipment Benefits and Perks • Industry-competitive compensation package, • Company performance-based bonus plan, • Equity stock-based compensation package, • Employer-funded comprehensive health, vision, and dental insurance for employees and dependents, • 401k with company match, • PTO & holiday pay, • Employer-funded life and disability insurance coverages Company Profile Founded in 2013, FMS is a growing, flexible, customer-driven aircraft structural engineering and flight test company with manufacturing capability. We have many opportunities with a variety of types of projects with both foreign and domestic governments and commercial customers across many types of aircraft. Our parent company, Bridger Aerospace is an aerial firefighting and critical infrastructure support company based in Belgrade, Montana. It was founded in 2014 to support front-line firefighters with world-leading technology and aerial fire suppression systems. Bridger Aerospace has grown from operating a single plane to commanding a significant Air Attack fleet, Special Missions Sensor Equipped Aircraft, and the largest privately operated Super Scooper fleet in the world. This position is subject to pre-employment background check. Bridger Aerospace Group Holdings and its family of companies does not discriminate or permit discrimination by any member of its community against any individual on the basis of race, color, religion, national origin, sex, pregnancy, sexual orientation, gender identity, gender expression, parental status, marital status, age, disability, citizenship status, veteran status, genetic information, or any other classification protected by federal or state law in matters of employment, promotion, services or activities it operates.

Job Description Job Summary The Production Staff - Assembler performs a variety of electronic and electro-mechanical assembly operations on assemblies and subassemblies using hand tools, torque drivers, and computer systems. The role follows established methods and sequences to perform wiring, component installation, board installation, and cable harnessing in accordance with work instructions and quality standards. Essential Duties and Responsibilities • Perform electronic and electro-mechanical assembly operations on assemblies and subassemblies using hand tools, torque drivers, and computer systems., • Follow methods and sequence of operations for wiring, component installation, board installation, and cable harnessing., • Utilize the HSL ERP system (CORE) to complete daily production activities., • Use provided materials and tools to complete assemblies or subassemblies accurately and efficiently., • Inspect and check quality at each step of the assembly process to ensure compliance with specifications., • Complete assigned tasks within takt time to ensure efficient product flow., • Work safely and follow all HSL and OSHA safety rules and regulations., • Maintain a clean, organized, and safe work area., • Perform other related duties as assigned., • Must be able to maintain regular attendance. Qualifications Education and Experience • Minimum of two (2) years of experience, or equivalent, in electronic assembly in a manufacturing environment., • High school diploma or equivalent preferred. Skills and Abilities • Ability to read and interpret work instructions and ERP system information., • Manual dexterity to manipulate tools and small parts., • Ability to sit or stand for extended periods., • Ability to lift and carry 25 pounds as needed., • Good vision and attention to detail. Physical Demands The physical demands described here are representative of those required to successfully perform the essential functions of this job. Reasonable accommodations may be made in accordance with the Americans with Disabilities Act (ADA). • Sit or stand for extended periods., • Manipulate small components and hand tools., • Lift or carry items weighing up to 20 pounds., • Repetitive hand and finger movements. Work Environment • Manufacturing and production environment., • Exposure to electronic components, electrostatic discharge (ESD)-sensitive materials, and moderate noise levels., • Fast-paced production setting with changing priorities. Required Training • Safety Training, • Electrostatic Discharge (ESD) Training, • Job-Specific Work Procedure Training

Job Description FMS Aerospace is seeking a full-time Electrical Assembly Lead for our Huntsville shop. This person will run day-to-day electrical assembly work: assign jobs, set priorities, check workmanship, keep travelers accurate, and keep the crew on schedule. They will be part of the production team and will build electrical assemblies on schedule, document the work, and meet quality standards on every job. The role requires close attention to detail, ability to lead the electrical assembly team and train junior technicians. Responsibilities • Lead daily electrical assembly work in the shop, including job assignment, priorities, and status., • Review incoming work packages for drawings, BOMs, revisions, and missing information before the job hits the bench, • Check in-process and completed cables, harnesses, and assemblies for workmanship and drawing compliance, • Train technicians on build methods, tooling, ESD, FOD, travelers, and quality expectations, • Keep multiple jobs moving and raise schedule, parts, or quality risks to management early, • Maintain project routers and shop records so configuration and status are accurate, • Enforce AS9100, ESD, FOD, tool-control, and shop safety practices, • Build cables, wire harnesses, and related electrical assemblies from manufacturing orders, drawings, engineering changes, customer specifications, and process instructions, • Cut, strip, route, crimp, solder, terminate, and label wiring; install heat shrink, boots, backshells, and other protective hardware, • Test completed assemblies for continuity, shorts, and grounds, • Integrate finished harnesses into assemblies, enclosures, or equipment racks as required Required qualifications • High school diploma, • 5+ years building cables, wire harnesses, or aircraft/avionics electrical assemblies in a production shop, • Experience with both crimp and solder harness work, • Ability to read drawings, schematics, wiring diagrams, work instructions, and bills of material, • Working knowledge of IPC standards, including J-STD-001 and IPC-A-610., • Must possess IPC/WHMA-A-620 certification., • Familiarity with IPC, J-STD, SAE AS, and MIL specifications used in defense/aerospace harness work, • Ability to use basic electronic test equipment, including multimeters and insulation testers., • Strong attention to detail and consistent workmanship, • Ability to work with shop teammates and keep documentation accurate, • Proficiency in English (written and spoken), • Must be a U.S. citizen, • Must currently possess an active DOD Secret clearance or higher. Preferred qualifications • J-STD-001 and/or IPC-A-610 certification, • Harness or solder experience to IPC Class 3, • Experience in an AS9100 aerospace or defense shop, • Familiarity with analog and digital electronics, • Experience with aircraft or airframe electrical modifications, • A&P or other aviation/avionics certification, • Military or DoD electrical/avionics background, • Familiarity with aircraft wiring practices such as SAE AS50881, • Use of an oscilloscope, signal generator, or similar test equipment Benefits and Perks • Industry-competitive compensation package, • Company performance-based bonus plan, • Equity stock-based compensation package, • Employer-funded comprehensive health, vision, and dental insurance for employees and dependents, • 401k with company match, • PTO & holiday pay, • Employer-funded life and disability insurance coverages Company Profile Founded in 2013, FMS is a growing, flexible, customer-driven aircraft structural engineering and flight test company with manufacturing capability. We have many opportunities with a variety of types of projects with both foreign and domestic governments and commercial customers across many types of aircraft. Our parent company, Bridger Aerospace is an aerial firefighting and critical infrastructure support company based in Belgrade, Montana. It was founded in 2014 to support front-line firefighters with world-leading technology and aerial fire suppression systems. Bridger Aerospace has grown from operating a single plane to commanding a significant Air Attack fleet, Special Missions Sensor Equipped Aircraft, and the largest privately operated Super Scooper fleet in the world. This position is subject to pre-employment background check. Bridger Aerospace Group Holdings and its family of companies does not discriminate or permit discrimination by any member of its community against any individual on the basis of race, color, religion, national origin, sex, pregnancy, sexual orientation, gender identity, gender expression, parental status, marital status, age, disability, citizenship status, veteran status, genetic information, or any other classification protected by federal or state law in matters of employment, promotion, services or activities it operates.

Job Description Production Assembler (Non-Technical) Location: Huntsville, AL Position Status: Part-Time, Temporary Work Schedule: Part-time hours scheduled during regular business hours, Monday–Friday. Schedule may vary based on production needs. This position is on-site; remote or hybrid work is not available. Position Summary This is a part-time, temporary position responsible for performing routine, non-technical production tasks in a manufacturing environment. Duties primarily include machine-assisted marking, bagging, tagging, and packaging of parts and assemblies in accordance with established work instructions and quality standards. Employment is expected to be temporary based on business needs and does not guarantee continued or full-time employment. Duties and Responsibilities • Operate marking equipment or machines following established work instructions, • Bag, tag, label, and package parts and assemblies accurately, • Verify part numbers, quantities, and identification prior to packaging, • Inspect parts for obvious defects or damage prior to marking and packaging, • Maintain accurate labeling and documentation as required, • Follow all safety procedures and company policies at all times, • Maintain a clean and organized work area, • Meet daily production goals and quality standards, • Notify supervision of equipment issues, material shortages, or quality concerns, • Perform other non-technical production tasks as assigned Education, Experience, and Qualifications • High school diploma or equivalent preferred, • No prior electrical or technical experience required, • Ability to follow written and verbal instructions, • Basic attention to detail and quality, • Ability to perform repetitive tasks in a fast-paced environment, • Basic computer or machine interface skills preferred but not required, • Ability to work independently and as part of a team, • Must demonstrate professional, respectful behavior with coworkers and supervisors Physical Requirements: Work may involve sitting or standing for extended periods of time. Position may require typing and reading from a computer screen. Must have sufficient mobility to include but not limited to bending, reaching, climbing, turning, and kneeling to complete daily duties in a timely and efficient manner. Walking moderate to long distances may be required. Must be able to lift/carry/push/pull/move items frequently over 20 pounds. Occasionally required to lift/carry/push/pull/move heavy objects up to 50 pounds. Work Environment: The environmental characteristic for this position is an aircraft hangar, warehouse setting and outdoors. Candidates should be able to adapt to environments listed. There may be exposure to high noises, exposure to chemicals and cleaning agents, and Personal Protection Equipment may be required for certain tasks. This position must be able to work comfortably outdoors and may be exposed to hot/cold, wet/humid, and dry/arid conditions. Axxeum, Inc. is an equal opportunity employer. The company will provide equal opportunity in employment to all employees and applicants for employment. No person will be discriminated against in employment because of race, religion, color, sex, age, national origin, disability, genetic information, military status, sexual orientation, gender identity or any other characteristic protected by applicable federal or state law. This policy applies to all terms, conditions, and privileges of employment and all policies of the company. At the time of hiring, employees are required to sign a written statement acknowledging that they are employed at the will of the company and are subject to termination at any time, for any reason, with or without notice, and with or without cause. Employees who do not have an individualized written employment contract or a collective bargaining agreement are employed at the will of the company and are subject to termination at any time, for any reason, with or without cause or notice. At the same time, these employees may terminate their employment at any time for any reasons.

Job Description Lula is looking for a 1099 Plumbing Repair Pro to help with property maintenance of several thousand rental properties across the Huntsville area. We are seeking individuals who have experience in the rental property industry and has an eager attitude. What is Lula? Lula is a service designed for property managers to eliminate the hassle of managing and coordinating maintenance, improve the resident experience, and reduce maintenance costs for property owners. Lula works hand-in-hand with our service-provider partners to ensure everyone gains. Unlike other platforms, Lula has been designed from the ground up to work with your needs and answer your concerns. Whether you are a mom-and-pop small business or an international corporation, there are many reasons why joining the Lula Network is a good idea for your company. Apply Here: https://lula.life/become-a-provider/huntsville BENEFITS WITH LULA: -Lula delivers real jobs, not leads -Set your own hourly rates -24/7 phone and text support for Lula Pros -New jobs available daily -Choose only the jobs you want -Paid for labor and parts within 1-3 days REQUIREMENTS: -Must be 18 or older -Must have General Liability Insurance -No felonies within the past 7 years -Be friendly, respectful, and punctual -Must provide your own tools and materials -Must complete vendor onboarding and be approved Job Type: Contract Please email pro@lula.life with any questions

Job DescriptionMaster Plumber (Licensed) Full-Time Location: Huntsville, AL; Clearwater, FL; Daytona/Port Orange, FL; Ft. Myers, FL; Jacksonville, FL; Lakeland, FL; Longwood, FL; Melbourne, FL; Punta Gorda, FL; Sarasota, FL; St. Petersburg, FL; Tampa, FL; Lawrenceville, GA; Alpharetta, GA; Louisville, KY; Erlanger, KY; Saginaw, MI; Morristown, NJ; Farmingdale, NY; Asheville, NC; Hickory, NC; Milford, OH; Eastlake, OH; Columbus, OH; Dayton, OH; Springfield, OH; Columbiana, OH; Hollidaysburg, PA; Harrisburg, PA; Johnstown, PA; Tarentum, PA; Boalsburg, PA; Belton, SC; Ladson, SC; Greenville, SC; Knoxville, TN; Purcellville, VA; Chesapeake, VA; 24/7 Emergency Plumbing & Drain Services About Our Client Our Client is a fast-growing, franchise-based emergency plumbing, drain cleaning, and water damage restoration company operating 24 hours a day, 365 days a year. With locations across the United States, Our Client is redefining the plumbing industry through honest, upfront pricing, rapid response times, and an unwavering commitment to customer satisfaction. Our Client is not just a plumbing company, it is a team of dedicated professionals who show up when it matters most. Position Summary Our Client is seeking a skilled and licensed Master Plumber to join our growing team. In this role, you will be the senior technical expert on the job site, responsible for diagnosing complex plumbing issues, overseeing installations and repairs, mentoring junior technicians, and ensuring all work meets state and local code requirements. This is a hands-on leadership role that blends technical expertise with outstanding customer service. Key Responsibilities • Diagnose, troubleshoot, and repair complex residential and commercial plumbing systems including pipes, fixtures, water heaters, sump pumps, and sewer lines, • Lead and perform installations of plumbing systems for new construction and remodel projects, • Respond to 24/7 emergency plumbing calls with urgency and professionalism, • Perform drain cleaning, hydro-jetting, video camera inspections, and excavation-related plumbing work, • Oversee and mentor apprentice and journeyman plumbers on job sites, • Ensure all work complies with applicable state, local, and municipal building codes and safety regulations, • Pull permits and coordinate inspections as required, • Communicate clearly with customers, explaining issues and solutions in plain language with upfront pricing, • Accurately document work completed, parts used, and time spent for billing and records, • Maintain company vehicles, tools, and equipment in proper working order, • Collaborate with dispatch and operations teams to prioritize and schedule service calls efficiently Requirements • Active Master Plumber license in the applicable state (required), • Minimum 7+ years of hands-on plumbing experience, with at least 2 years at the Master Plumber level, • Comprehensive knowledge of plumbing codes, standards, and best practices, • Experience with both residential and commercial plumbing systems, • Ability to read and interpret blueprints, schematics, and technical diagrams, • Strong problem-solving skills and ability to work independently in the field, • Excellent communication and customer service skills, • Valid driver's license with a clean driving record, • Ability to pass a background check and drug screening, • Physical ability to lift up to 50 lbs, work in confined spaces, and perform tasks requiring standing, kneeling, or crouching for extended periods Preferred Qualifications • Experience with water damage restoration services, • Familiarity with hydro-jetting equipment and sewer camera systems, • Prior experience in a franchise or multi-location service environment, • OSHA 10 or OSHA 30 certification, • EPA or other relevant trade certifications Compensation & Benefits Our Client offers a competitive compensation package designed to reward experience, performance, and dedication: • Competitive base salary commensurate with experience, • Performance-based bonuses and incentives, • Overtime opportunities; 24/7 operation means real earning potential, • Health, dental, and vision insurance, • Paid time off and holidays, • Company-supplied vehicle, tools, and uniforms, • Ongoing training and professional development opportunities, • Clear path for career advancement within a rapidly expanding company Why Join Our Client? Our Client was built on the belief that customers deserve honesty, urgency, and quality and so do our employees. We are a company that values our technicians and invests in their growth. When you join Our Client, you become part of a team that shows up, does the job right, and takes pride in making a difference for homeowners and businesses every single day. Our Client is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status

Job Description PURPOSE OF POSITION: The Plumber Journeyman is responsible for coordinating the installation, maintenance, and repair of plumbing systems on commercial, industrial, residential, or government construction projects. This role ensures field crews, plans daily work activities, and all plumbing work is performed safely, efficiently, and in compliance with project specifications, plumbing codes, and company standards. The Plumber Journeyman demonstrates trustworthiness by consistently following company processes, enforcing safety and code requirements, and communicating honestly and transparently with project leadership. A positive work ethic is shown through strong jobsite leadership, proactive planning, and a commitment to quality, productivity, and accountability. RESPONSIBILITES: Installation & Repair • Install, repair, and maintain plumbing systems including water, waste, vent, storm, and gas piping., • Install fixtures such as toilets, sinks, faucets, water heaters, pumps, and specialty plumbing equipment., • Cut, thread, groove, solder, braze, or solvent‑weld pipe and fittings as required., • Test plumbing systems for leaks, pressure, and proper operation. Blueprint Reading & Layout • Read and interpret blueprints, specifications, plumbing schematics, and details., • Perform layout for piping runs, fixture locations, and penetrations., • Verify measurements, elevations, and slopes for proper drainage and flow., • Identify conflicts and report discrepancies to supervision. Codes & Compliance • Ensure work complies with local, state, and national plumbing codes., • Follow job‑specific requirements and inspection procedures., • Assist with inspections and correct deficiencies as needed. Tools & Equipment • Safely operate hand tools, power tools, threading machines, and specialty plumbing equipment., • Maintain tools and equipment in proper working condition., • Keep work areas clean, organized, and safe. Safety & Teamwork • Follow all company and jobsite safety policies and procedures., • Use proper PPE and follow confined space, hot‑work, and lockout/tagout requirements when applicable., • Work cooperatively with foremen, other plumbers, and construction trades., • Communicate progress, material needs, and jobsite issues clearly. QUALIFICATIONS: Required • Valid Journeyman Plumber license or certification., • 4+ years of plumbing experience in commercial, industrial, or residential settings., • Strong knowledge of plumbing systems, materials, and installation methods., • Ability to read and interpret blueprints and specifications., • Knowledge of plumbing codes and jobsite safety requirements., • Ability to work independently and as part of a team., • Physical ability to lift 50+ lbs, climb ladders, and work in confined spaces., • Valid driver’s license and reliable transportation. Preferred • Experience on commercial, industrial, or government projects., • OSHA 10 or OSHA 30 certification., • Experience with medical gas, process piping, or large‑scale plumbing systems. WORKING CONDITIONS: • Jobsite environment—indoors, outdoors, and potentially in confined spaces or elevated areas., • Requires standing, climbing, lifting 50+ lbs, and working with tools., • Exposure to noise, heat, sparks, and heavy materials., • Work may involve travel between job sites.

Job Description PLUMBER (ID# 651) JOURNEYMAN & APPRENTICE LEVEL PLUMBERS CAN APPLY FULL TIME POSITION - PAY BASED ON EXPERIENCE Location: Huntsville, AL; Clearwater, FL; Daytona, FL; Port Orange, FL; Ft. Myers, FL; Jacksonville, FL; Lakeland, FL; Longwood, FL; Melbourne, FL; Punta Gorda, FL; Sarasota, FL; St. Petersburg, FL; Tampa, FL; Lawrenceville, GA; Alpharetta, GA; Louisville, KY; Erlanger, KY; Saginaw, MI; Morristown, NJ; Farmingdale, NY; Asheville, NC; Hickory, NC; Milford, OH; Eastlake, OH; Columbus, OH; Dayton, OH; Springfield, OH; Columbiana, OH; Cleveland, OH; Hollidaysburg, PA; Harrisburg, PA; Johnstown, PA; Tarentum, PA; Boalsburg, PA; Belton, SC; Ladson, SC; Greenville, SC; Knoxville, TN; Purcellville, VA; Chesapeake, VA; Akron, OH; Allentown, PA; Buffalo, NY; Ft. Lauderdale, FL; Gatlinburg, TN; Naples, FL; Reston, VA; Rockville, MD; Vero Beach, FL; About Our Client Our Client is a nationally recognized residential and commercial plumbing services company committed to delivering fast, reliable, and professional plumbing solutions. With a team of expert technicians across the country, we take pride in exceptional workmanship, transparent pricing, and outstanding customer service. Join a growing company that values its people and invests in their success. Position Overview We are seeking a skilled Plumber to join our team. The ideal candidate is a dedicated professional who takes pride in quality craftsmanship, communicates effectively with customers, and thrives in a fast-paced service environment. You will be responsible for diagnosing, repairing, installing, and maintaining plumbing systems in residential and commercial properties. Key Responsibilities • Install, repair, and maintain pipes, fixtures, water heaters, sump pumps, and other plumbing equipment, • Diagnose and troubleshoot plumbing issues including leaks, clogs, and pipe damage, • Perform drain cleaning, hydro-jetting, and sewer line inspections, • Install and repair bathroom and kitchen fixtures including sinks, toilets, faucets, and showers, • Respond promptly to emergency service calls and provide timely solutions, • Read and interpret blueprints, schematics, and building codes to ensure compliant installations, • Perform water heater installations and repairs (traditional and tankless units), • Detect and repair gas line issues in compliance with local codes and safety standards, • Collaborate with other tradespeople on new construction and renovation projects, • Maintain accurate records of work performed, parts used, and time on job, • Communicate professionally with customers, explaining issues and recommended solutions, • Maintain a clean, organized work vehicle and inventory of suppliesRequired Qualifications, • Valid state plumbing license (where required), • Minimum 2+ years of hands-on plumbing experience in residential and/or commercial settings, • Valid driver's license with a clean driving record, • Strong working knowledge of local, state, and national plumbing codes, • Ability to lift up to 50 lbs and work in confined spaces or at heights, • Proficiency with hand tools, power tools, and diagnostic equipment, • Strong customer service and communication skills, • Ability to work independently and manage time effectivelyPreferred Qualifications, • Experience with service and repair (not just new construction), • Familiarity with plumbing software or CRM scheduling systems, • OSHA 10 or OSHA 30 certification, • Bilingual (English/Spanish) is a plus What We Offer, • Competitive hourly wage or salary based on experience and location, • Health, dental, and vision insurance, • Paid time off (PTO) and paid holidays, • 401(k) with company match, • Company-provided vehicle, tools, and uniforms, • Ongoing training and professional development opportunities, • Performance bonuses and incentive programs, • Opportunities for advancement into lead technician or management roles

Job Description We are currently seeking motivated persons for 6-8 openings for Commercial Electricians. We are a locally owned small business with local projects. We are seeking persons with a good attendance record and wish to contribute their skills to a growing company. Room for advancement. Responsibilities: • Install various types of raceway and cable tray systems, • Install electrical equipment, fixtures, and wiring devices, • Troubleshoot motor and control systems, • Perform routine maintenance on electrical wiring and systems, • Adhere to all quality and safety codes Qualifications: • Previous experience in electrical field - 2 to 4 years, • Familiarity with electrical schematics, blueprints, and manuals, • Familiarity with electrical equipment and hand tools, • Strong problem solving and critical thinking skills

Job Description JOIN OUR TEAM AT AVANS ELECTRIC! NOW HIRING 3-5 EXPERIENCED SERVICE TECHNICIANS Avans Electric is a fast-growing, family-owned service company with room for advancement. We are committed to delivering top-tier service to both Residential and Commercial clients.We pride ourselves on professionalism, integrity, and a strong team culture. We are looking for Motivated and Experienced team players with Good Attendance History. If you have a passion for the electrical trade, take pride in your work, and thrive in a collaborative customer focused environment --- we want to hear from you! WHY WORK WITH US? • Competitive Pay and Bonuses ($60,000 to more than $80,000 based on experience), • Paid Holidays and Vacation, • 401k Plan Match, • Health, Vision and Dental Insurance, • Company Vehicle Responsibilities: • Install and repair electrical equipment and fixtures, • Install various types of raceway and cable tray systems, • Troubleshoot residential and commercial wiring systems, • Perform routine maintenance on electrical wiring and systems, • Adhere to all quality and safety codes Qualifications: • 3+ Years Experience Preferred in Residential and Commercial Electrical, • Must be able to pass background check/drug screen, • Strong Problem Solving and Critical Thinking Skills, • Familiarity with electrical schematics, blueprints, and manuals, • Familiarity with electrical equipment and hand tools, • Strong problem solving and critical thinking skills, • Must have a valid drivers license and reliable transportation, • Must have basic hand tools such as lineman pliers, wire strippers, screw drivers, and a drill/impact.

Job Description The Electrical Foreman will oversee commercial construction electrical projects, supervising crews of 1–5 electricians while coordinating worksite activities, maintaining safety and quality standards, and ensuring work progresses according to project requirements. This role reports to the Project Manager and requires no travel. Responsibilities • Supervise and coordinate a crew of 1–5 electricians., • Oversee electrical installation activities on commercial construction projects., • Interpret blueprints and coordinate worksite operations., • Ensure compliance with electrical codes and project requirements., • Manage electrical materials and support efficient resource use., • Provide safety oversight and promote safe jobsite practices., • Monitor project progress and submit updates to the Project Manager/Owner., • Troubleshoot electrical issues and support quality control. Preferred Qualifications • 2+ years of experience in electrical construction supervision., • Electrical trade school or apprenticeship training., • Knowledge of electrical systems and blueprint reading., • Understanding of electrical code compliance and jobsite safety., • Experience with crew leadership and project scheduling., • Strong quality control and problem-solving skills.

Job Description Electrician Technician Automation Personnel Services is looking for an Electrician for a company based in Huntsville, AL. In this role, you will be responsible for installation, replacement, alteration, adjustment, repair, and planned maintenance necessary to maintain reliable and functionally efficient operations of electrical lighting, power distribution, building systems, fixtures, and equipment. Pay Rate $28.00 per hour Schedule and Hours 7:00 am – 3:30 pm Monday through Friday (Hours may vary) Electrician Duties and Responsibilities • Responsible for carrying out skilled tasks in accordance with best practices of the electrical trade. • Installs, maintains, and alters electrical systems up to 480 volts in facilities following standard safety procedures., • Runs conduit, pulls wire, and installs circuits for electrically driven units. Maintains a clean work environment, cleans up, and properly stows tools and documents at the end of each workday. • Inspects work upon completion and see that electrical code and facility requirements have been satisfied. • Performs other duties assigned relating to the facilities manager. Electrician Qualifications and Requirements, • High School Diploma or equivalent required. • Completion of a recognized electrician apprenticeship preferred., • 5 years of related electrical maintenance experience is required. • Exerts up to 50 pounds of force occasionally and/or up to 20 pounds frequently and/or up to 10 pounds constantly to move objects., • Ability to comprehend written and /or verbal instructions. • Strong problem-solving skills. • Good communication and organizational skills. Job Type Full-time, long term temporary Benefits • Weekly Pay, • Medical, dental, vision, short-term disability, and life insurance, • 40 Hours Service Bonus after 1 year of continuous service and 1500 hours, • 6 paid Holidays after 1 year of continuous service and 1500 hours 401(k) Retirement Plan Automation Personnel Services is the only staffing agency specializing in manufacturing and industrial roles that offers 401K matching to all eligible contingent and temporary associates. Interested in this job? Click Apply Now, email your resume to john.powell@apstemps.com, or call us at 256.583.6823 to learn more. You can also apply in person at our office located at Automation Personnel Services On-site Office: 201 James Record Road Huntsville, AL 35824 Bonus Opportunity! We are also offering a $50.00 referral bonus. Both employee and referral must stay on assignment for 30 days to receive the payout. About Automation Personnel Services Automation Personnel Services is a highly recognized staffing agency with over 30 years of experience in manufacturing and light-industrial staffing. Our accolades include: • 10-time consecutive winner of the ClearlyRated® Best of Staffing Client Award (2016-2025)., • Winner of the ClearlyRated® Best of Staffing Talent Award (2019-2025)., • Recipient of the Safety Standard of Excellence Award by the American Staffing Association., • Named one of the Best Staffing Companies to Work For by CIO Views Magazine., • Consistently ranked among the top U.S. staffing agencies by Staffing Industry Analysts (SIA). Get that New Job Feeling! Apply Today! Equal Opportunity Employer APSHuntsville

Job DescriptionSalary: $16 - 18 per hour + none Reference: AB_5082137 We are seeking a skilled and dependable Mechanical Assembler to join our manufacturing team. The ideal candidate will assemble mechanical components and equipment using hand tools, power tools, blueprints, and detailed work instructions. Responsibilities include inspecting parts, ensuring proper alignment and fit, performing quality checks, and maintaining a safe and organized work area. Mechanical assembly or manufacturing experience is preferred, attention to detail, reliability, and the ability to work effectively as part of a team are essential. Apply today for an opportunity to build quality products and grow your skills in a hands-on manufacturing environment. salary: $16 - $18 per hour shift: Second work hours: 4 PM - 2:45 AM education: High School Responsibilities Read and interpret blueprints, assembly drawings, schematics, and work instructions. Assemble mechanical components using hand tools, power tools, and precision measuring equipment. Install fasteners, bearings, gears, brackets, motors, and other mechanical parts. Inspect completed assemblies for proper fit, alignment, dimensions, and workmanship. Use calipers, micrometers, gauges, torque tools, and other measuring instruments as required. Identify and troubleshoot assembly issues or defective components. Maintain a clean, organized, and safe work area. Follow company safety procedures and quality-control requirements. Complete production and inspection documentation accurately. Work with engineering, quality, and production teams to resolve assembly problems. #INDRISKP Skills • Mechanical Assembling, • Circuit Board Assembling, • Electronic Assembling, • Parts Assembling Qualifications • Years of experience: 2 years, • Experience level: Entry Level Randstad is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Randstad. Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. At Randstad, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require a reasonable accommodation to make your application or interview experience a great one, please contact HRsupport@randstadusa.com. Pay offered to a successful candidate will be based on several factors including the candidate's education, work experience, work location, specific job duties, certifications, etc. In addition, Randstad offers a comprehensive benefits package, including: medical, prescription, dental, vision, AD&D, and life insurance offerings, short-term disability, and a 401K plan (all benefits are based on eligibility). This posting is open for thirty (30) days.

Job Description This role is being listed as a 6-month contract with the potential to run longer to even a perm position with the Client! MUST HAVES in order to be submitted to Client: -Current certification in IPC/WHMA-A-620. -Current certification in J-STD-001. 2nd Shift - Mechanical Assembler to join a leading Company located in the Huntsville, AL surrounding area. US Citizenship is required. Pay: $27 - 30/hr pending experience Hours: Mon - Fri 4 pm to 12:30 am Responsibilities: • Build, troubleshoot, and repair cable assemblies., • Working knowledge and use of tools used for cable manufacturing (strippers, crimpers, solder iron)., • Interpret engineering drawings, electrical schematics, and technical specifications., • Candidates must have experience working with design engineers, manufacturing engineers, and other technicians to develop a strategy and identify any problems that could occur during assembly., • Perform basic troubleshooting to find faults in signal and connectivity issues. Basic Hiring Criteria: • High school diploma or equivalent with 1 to 3 years (or more) of experience in cable building and/or electrical/mechanical assembly., • Working knowledge of specialized tools (Crimpers, wire strippers) and equipment used during the cable assembly process., • Must be a US Citizen and possess (and be able to maintain) Final Secret Clearance OR meet the eligibility to obtain a Secret Clearance., • Current certification in IPC/WHMA-A-620., • Current certification in J-STD-001. Desired Qualifications: • Current certification in IPC/WHMA-A-620 with space addendum., • Current certification in J-STD-001 with space addendum.\nCompany Description TAD PGS partners with government agencies and industry leaders on critical projects across the country. Our employees have the opportunity to contribute to meaningful initiatives, develop valuable skills, and work alongside talented professionals in a collaborative, supportive, and mission-driven environment. At TAD PGS, our people are at the heart of everything we do. We are committed to providing rewarding career opportunities, competitive compensation, professional development, and a culture built on respect, integrity, and teamwork. Whether you are just starting your career or bringing years of experience, you'll find an environment where your contributions are recognized, your growth is encouraged, and your success is supported every step of the way. Join TAD PGS and become part of a company with a longstanding tradition of excellence, where exceptional talent is connected with impactful work that makes a difference. VEVRAA Federal Contractor / Request Priority Protected Veteran Referrals / Equal Opportunity Employer / Veterans / Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit http://www.tadpgs.com/candidate-privacy/ or https://pdsdefense.com/candidate-privacy/ The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Benefits offered to vary by the contract. Depending on your temporary assignment, benefits may include direct deposit, free career counseling services, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonus, affordable medical coverage plan, and DailyPay (in some locations). For a full description of benefits available to you, be sure to talk with your recruiter. TAD PGS partners with government agencies and industry leaders on critical projects across the country. Our employees have the opportunity to contribute to meaningful initiatives, develop valuable skills, and work alongside talented professionals in a collaborative, supportive, and mission-driven environment.\n\nAt TAD PGS, our people are at the heart of everything we do. We are committed to providing rewarding career opportunities, competitive compensation, professional development, and a culture built on respect, integrity, and teamwork. Whether you are just starting your career or bringing years of experience, you'll find an environment where your contributions are recognized, your growth is encouraged, and your success is supported every step of the way.\n\nJoin TAD PGS and become part of a company with a longstanding tradition of excellence, where exceptional talent is connected with impactful work that makes a difference.\n\n \n\nVEVRAA Federal Contractor / Request Priority Protected Veteran Referrals / Equal Opportunity Employer / Veterans / Disabled \n\n\nTo read our Candidate Privacy Information Statement, which explains how we will use your information, please visit http://www.tadpgs.com/candidate-privacy/ or https://pdsdefense.com/candidate-privacy/\n\n\nThe Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:\n\n \n\nThe California Fair Chance Act\nLos Angeles City Fair Chance Ordinance\nLos Angeles County Fair Chance Ordinance for Employers\nSan Francisco Fair Chance Ordinance\n\n \n\nBenefits offered to vary by the contract. Depending on your temporary assignment, benefits may include direct deposit, free career counseling services, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonus, affordable medical coverage plan, and DailyPay (in some locations). For a full description of benefits available to you, be sure to talk with your recruiter.\n\n

Job Description Assembly Technician Huntsville, AL Onsite Primary Responsibilities -Build, troubleshoot, and repair cable assemblies. -Working knowledge and use of tools used for cable manufacturing (strippers, crimpers, solder iron). -Interpret engineer drawings, electrical schematics, and technical specifications. Candidates must have experience working with design engineers, manufacturing engineers, and other technicians to develop a strategy and identify any problems that could occur during assembly. -Perform basic troubleshooting to find faults in signal and connectivity issues. Basic Qualifications Candidates must possess a High School diploma/GED with 1 to 3 years (or more) of experience with cable building and/or electrical/mechanical assembly experience. -Working knowledge of specialized tools (Crimpers, wire strippers) and equipment used during cable assembly process. Required Qualifications -Current certification in IPC/WHMA-A-620. -Current certification in J-STD-001. Preferred Qualifications -Current certification in IPC/WHMA-A-620 with space addendum -Current certification in J-STD-001 with space addendum \nCompany Description This client supports data centers through its infrastructure and engineering subsidiaries by providing mission-critical electrical, design, testing, and commissioning services. This client supports data centers through its infrastructure and engineering subsidiaries by providing mission-critical electrical, design, testing, and commissioning services.

Job Description Job Title: Electrical Assembler-If qualified and interested, text Caroline at 843/972/1883 Job Description The Electrical Assembler builds equipment and systems by assembling individual electrical and electronic components according to detailed engineering specifications. This role focuses on benchwork, assembling wiring harnesses, power supplies, and other electrical assemblies or subassemblies for aircraft, following IPC 620 standards. The Electrical Assembler typically works on less complex assignments while ensuring accuracy, quality, and timely completion of all builds. Responsibilities • Assemble electrical and electronic components on wiring harnesses, power supplies, and other electrical assemblies or subassemblies according to engineering specifications., • Read and interpret engineering specifications from text, technical drawings, and computer-aided drafting systems to guide assembly work., • Perform all work as benchwork, building wiring harnesses and mechanical boxes for aircraft to IPC 620 standards with a strong focus on accuracy and quality., • Build harnesses and boxes in a timely manner while meeting production targets and maintaining high workmanship standards., • Use wiring diagrams to lay out wires, route them correctly, and secure them in the appropriate locations., • Strip wires to specified lengths and prepare them for termination and assembly., • Cut heat shrink tubing to the required size and apply it correctly to protect and insulate wires and terminals., • Attach terminals and connectors to wires, ensuring proper crimping, sealing, and mechanical integrity., • Cover wires with appropriate protective tubing or sleeving and shrink the tubing using a heat gun to achieve a secure fit., • Interlace and organize multiple wires in harnesses to meet design and safety requirements., • Examine connectors and assemblies for defects, proper fit, and compliance with quality standards., • Seal and crimp wires and terminals using appropriate tools and precision measuring instruments., • Attach wires to male and female housings and ensure connectors are properly seated and secured., • Perform mechanical assembly work to build out electrical boxes and related subassemblies., • Follow work instructions and drawings for approximately 10% box build work, ensuring all mechanical components are correctly installed., • Use a variety of hand tools, power tools, and precision measuring instruments safely and effectively during assembly., • Adhere to all quality, safety, and documentation requirements throughout the assembly process., • Collaborate with team members and supervisors to resolve assembly issues and continuously improve processes. Essential Skills • At least 1 year of experience in wire harness assembly and box building., • Hands-on experience with harness assembly for aircraft or similar applications., • Proficiency in reading and interpreting blueprints, wiring diagrams, and engineering drawings., • Experience with electrical assembly and mechanical assembly in a production or maintenance environment., • Ability to perform electromechanical assembly, including working with wire harnesses and related components., • Strong attention to detail and accuracy in building harnesses and mechanical boxes to specification., • Ability to use a variety of tools and precision measuring instruments safely and effectively., • Capability to follow IPC 620 standards for wire harness assembly (experience working to this standard)., • High School Diploma or equivalent education., • Ability to work efficiently on benchwork, including repetitive tasks, while maintaining quality., • Willingness to work on either 1st or 2nd shift as required by production needs. Additional Skills & Qualifications • IPC 620 wire harness assembly certification is a strong plus., • IPC J-STD certification is not required but is considered an advantage., • Experience assembling harnesses for aircraft is highly desirable, but wire harness experience from any industry is welcomed., • Mechanical assembly experience, including building out electrical boxes and enclosures., • Experience with electromechanical assembly and working with wiring harnesses in aviation or avionics environments., • Candidates with military background performing intermediate-level (I-Level) maintenance are encouraged to apply., • Avionics experience is valued and may provide opportunities to transition to helicopter programs when available., • Ability to perform practical skills assessments or tests at the facility as part of the hiring process., • Strong problem-solving skills and ability to follow detailed work instructions., • Good communication skills and ability to work collaboratively in a team-oriented environment. Why Work Here? Employees join a fast-growing organization that offers strong job security, performance-based raises, and regular monthly performance reviews that support continuous development. The companys significant growth creates meaningful career advancement opportunities, including the ability to apply for internal positions and expand into new programs. Leadership is experienced and focused on customer success, creating a stable and forward-looking environment. The role is based in a city recognized as one of the best places to live in Alabama, offering a low cost of living, competitive compensation, and access to top-rated school systems, contributing to an excellent overall quality of life. Work Environment The position is based in a clean, air-conditioned facility designed for comfort and productivity. All work is performed as benchwork in a controlled environment, with dedicated breakrooms available for employees. The building is well-maintained and organized, supporting precision electrical and mechanical assembly work. Team members must be open to working either 1st shift (6:00 a.m. 2:30 p.m.) or 2nd shift (3:00 p.m. start) depending on operational needs. The environment emphasizes cleanliness, safety, and efficiency, providing suitable space and equipment for detailed wire harness and box assembly work. Job Type & Location This is a Contract position based out of Huntsville, AL. Pay and Benefits The pay range for this position is $22.00 - $30.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract position based out of Huntsville, AL. Application Deadline This position is anticipated to close on Nov 9, 2026. Workplace Type This is a fully onsite position in Huntsville,AL. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Job Title: Mech Assembler II Location: 1006 EXPLORER BLVD, Huntsville, AL, 35806 Duration: 6 months (Contract to hire) Client: Leidos PR: $33.80/hr on W2 2nd shift position Mon-Thurs (4:00pm - 12:30am) Job Description: MUST HAVE CERTIFICATIONS: -Current certification in IPC/WHMA-A-620. -Current certification in J-STD-001. This is a wire harness assembly role, not PCB wiring. Primary Responsibilities -Build, troubleshoot, and repair cable assemblies. -Working knowledge and use of tools used for cable manufacturing (strippers, crimpers, solder iron). -Interpret engineer drawings, electrical schematics, and technical specifications. Candidates must have experience working with design engineers, manufacturing engineers, and other technicians to develop a strategy and identify any problems that could occur during assembly. -Perform basic troubleshooting to find faults in signal and connectivity issues. \ Basic Qualifications • Candidates must possess a High School diploma/GED with 1 to 3 years (or more) of experience with cable building and/or electrical/mechanical assembly experience., • -Working knowledge of specialized tools (Crimpers, wire strippers) and equipment used during cable assembly process., • Must be a US Citizen and possess (and be able to maintain) Final Secret Clearance OR meet the eligibility to obtain a Secret Clearance., • This posting is for multiple opportunities ranging in years of experience. Level of opportunity, including compensation, will be matched to a candidate's experience. Required Qualifications -Current certification in IPC/WHMA-A-620. -Current certification in J-STD-001. Preferred Qualifications -Current certification in IPC/WHMA-A-620 with space addendum -Current certification in J-STD-001 with space addendum \nCompany Description About Indotronix Indotronix has been providing staffing services to Fortune 500 companies and federal, state, and local government agencies for more than 38 years. We have recently been recognized as one of the largest staffing companies in the US by Staffing Industry Analysts. To learn more about us or to view additional job opportunities, please visit our website at: iic.com. About Indotronix\nIndotronix has been providing staffing services to Fortune 500 companies and federal, state, and local government agencies for more than 38 years. We have recently been recognized as one of the largest staffing companies in the US by Staffing Industry Analysts. To learn more about us or to view additional job opportunities, please visit our website at: iic.com.

Job DescriptionJob Summary We are seeking a skilled individual to join our team in a wire harness assembly role. This position focuses on building, troubleshooting, and repairing cable assemblies on the manufacturing floor. The role involves interpreting engineering drawings, electrical schematics, and technical specifications to ensure high-quality cable builds. Primary Responsibilities • Build, troubleshoot, and repair cable assemblies., • Utilize tools such as strippers, crimpers, and solder irons for cable manufacturing., • Interpret engineering drawings, electrical schematics, and technical specifications., • Collaborate with design engineers, manufacturing engineers, and other technicians to develop strategies and identify potential assembly issues., • Perform basic troubleshooting to resolve signal and connectivity issues.QualificationsMust-Have (Hard Skills), • Current certification in IPC/WHMA-A-620., • Current certification in J-STD-001., • High School diploma or GED., • 1 to 3 years of experience in cable building and/or electrical/mechanical assembly., • Working knowledge of tools and equipment used in the cable assembly process, such as crimpers and wire strippers., • Must be a U.S. Citizen and possess or be eligible to obtain a Final Secret Clearance.Nice-To-Have (Hard Skills), • Current certification in IPC/WHMA-A-620 with space addendum., • Current certification in J-STD-001 with space addendum.Must-Have (Soft Skills), • Ability to read and interpret blueprints.Work Environment, Projects, & Team Overview, • Work on the manufacturing floor in small groups to complete manufacturing tasks., • Support cable build projects., • Mechanically strong candidates have succeeded in this position.Challenges & Opportunities The biggest challenge is obtaining and maintaining the necessary certifications. Growth and development opportunities are available within the role and the greater team. Schedule This is a 2nd shift position, Monday through Thursday, from 4:00 PM to 2:30 AM. Location This opportunity is located in [City, State], known for its vibrant community and excellent amenities.

Job DescriptionAbout We Build We FixWe Build We Fix is a property services company serving property managers, owners and real estate professionals in Huntsville, AL, Chattanooga, TN and Nashville, TN. We handle punch lists, unit turnovers, maintenance and handyman work. Our clients depend on us to get properties rent-ready and sale-ready on schedule. We take pride in our work, our relationships and the results we deliver. Position overviewWe are seeking a skilled, dependable Painter to complete interior and exterior painting on residential and multifamily properties. Most work is unit turnovers, punch-list touch-ups and repaints for property management clients. The right candidate works cleanly and efficiently, takes pride in a professional finish and can complete jobs with minimal supervision. Turnover work runs on tight deadlines, so reliability matters as much as skill. Responsibilities: • Prepare surfaces by cleaning, scraping, sanding, caulking, patching holes and repairing minor drywall damage., • Protect floors, fixtures, furniture and landscaping with drop cloths, masking and tape., • Apply primer, paint, stain and sealer to walls, ceilings, trim, doors and cabinets using brush, roller and sprayer., • Match existing colors and sheens for touch-ups and partial repaints., • Complete full unit repaints within turnover deadlines., • Paint exterior siding, trim, doors, railings and decks., • Review work orders, estimate materials needed and report any additional repairs found on site., • Maintain and clean brushes, rollers, sprayers, ladders and other equipment., • Leave each job site clean and ready for the client's walkthrough., • Follow safety practices for ladders, scaffolding and paint products., • Communicate professionally with property managers, tenants and team members. Requirements: • 2+ years of professional painting experience, residential or multifamily preferred., • Skilled in cutting in, rolling and spraying, with clean lines and consistent coverage., • Solid surface preparation skills, including drywall patching, caulking and sanding., • Working knowledge of paint types, primers, sheens and their correct uses., • Valid driver's license and reliable transportation to job sites., • Own basic hand tools: brushes, rollers, putty knives and caulk gun., • Able to lift 50 lbs, climb ladders and stand, bend or kneel for extended periods., • Dependable and punctual, with strong attention to detail., • Professional conduct in occupied homes and around tenants., • Able to pass a background check [and drug screening, if applicable]. Preferred qualifications: • Experience with apartment turnovers or property management clients., • Airless sprayer experience, including setup, operation and cleaning., • Cabinet refinishing, staining or specialty finish experience., • Drywall repair and texture matching., • General handyman skills such as light carpentry, trim work or minor repairs., • EPA Lead-Safe (RRP) certification., • Bilingual in English and Spanish.

Job Description Overview: Entry-Level Assembly Engineer Location: Huntsville, AL Industry: Automotive Manufacturing Pay: $23.00–$26.00/hour Job Type: Full-Time Classification: Non-Exempt We are hiring an Entry-Level Assembly Engineer for an automotive manufacturing company in the Huntsville area. Although this is an entry-level engineering position, candidates should have approximately 2–3 years of hands-on experience in assembly, wiring, welding, fabrication, or a related manufacturing environment. Responsibilities • Support assembly and fabrication operations, • Perform mechanical assembly and wiring, • Assist with MIG and TIG welding processes, • Read and interpret 2D engineering drawings, • Troubleshoot assembly and fabrication issues, • Work closely with production, engineering, and quality teams, • Ensure work meets established quality and safety standards, • Support continuous improvement within the manufacturing process Requirements • 2–3 years of assembly, wiring, welding, fabrication, or related manufacturing experience, • Ability to read and understand 2D drawings is required, • Experience or familiarity with MIG and TIG welding, • Strong mechanical aptitude, • Automotive manufacturing experience is a plus, • Strong attention to detail, • Good troubleshooting and problem-solving skills, • Ability to work effectively in a fast-paced manufacturing environment Apply today for this full-time opportunity in Huntsville, AL. Skills and Experience: Responsibilities • Support assembly and fabrication operations, • Perform mechanical assembly and wiring, • Assist with MIG and TIG welding processes, • Read and interpret 2D engineering drawings, • Troubleshoot assembly and fabrication issues, • Work closely with production, engineering, and quality teams, • Ensure work meets established quality and safety standards, • Support continuous improvement within the manufacturing process Requirements • 2–3 years of assembly, wiring, welding, fabrication, or related manufacturing experience, • Ability to read and understand 2D drawings is required, • Experience or familiarity with MIG and TIG welding, • Strong mechanical aptitude, • Automotive manufacturing experience is a plus, • Strong attention to detail, • Good troubleshooting and problem-solving skills, • Ability to work effectively in a fast-paced manufacturing environment Benefits: Don't miss this chance to enhance your experience in a production environment while enjoying competitive pay and a comprehensive benefits package. • Weekly pay, • $5 prescription drugs, • $5 doctor's visit copays, • Free teledoctor service, • Free counseling services, • Life insurance included, • Vision insurance included, • Dental insurance included, • Vacation and holiday pay, • Scholarship Opportunities, • 401(k) retirement plan, • Free legal services, • Our unbeatable employee discount program Apply now so we can hold a spot for you. We can’t wait to talk to you! ––Your Ōnin team

Job Description We are currently seeking a Plumbing Foreman for Huntsville, AL. Must have strong mechanical knowledge in the commercial Plumbing or Piping industry. The individual will direct onsite workers. Must have the ability to maintain safety, quality and productivity. Responsibilities: • Direct and manage the installation of plumbing systems • Enforce all safety guidelines • Lead and manage designated crew • Knowledge and ability of tools of the trade • Ability to read, understand, and apply blueprints • Ability to lift 50lbs and work in tight spaces • Effectively communicate with superintendents, project managers, and other necessary coworkers • Ability to use IPAD and or IPhone Qualifications: • 3 years of foreman experience • Must know all aspects of plumbing. Underground, overhead rough setting fixtures, gas piping, and other plumbing systems • Equipment operation is a plus • Blueprint, submittals, specs knowledge • Travel is a must • Be able to pass a drug screening • Willing to work in the elements, hot and cold • Strong leadership skills \nCompany Description We offer an extensive network of professionals, developed over 50 years of combined experience. Our business structure is simple - there is no bureaucracy to struggle with. We offer an extensive network of professionals, developed over 50 years of combined experience. Our business structure is simple - there is no bureaucracy to struggle with.

Job Description Paint Process Technician Overview SimTech, Inc., recognized as one of the 2026 Best Places for Working Parents, is seeking a Paint Process Technician to join our manufacturing team in Huntsville, AL. The Paint Process Technician is responsible for supporting the complete preparation, handling, inspection, and closeout of parts through the paint and coatings process. This position performs critical pre-paint activities including cleaning, masking, plugging, racking, hanging, identification/part marking, and preparation of components for coating operations. The Paint Process Technician also supports coating inspection, maintains paint-shop materials and consumables, performs end-of-shift equipment cleaning and shutdown activities, and maintains a clean, organized, and production-ready work environment. This position requires strong attention to detail and the ability to consistently follow work instructions, engineering requirements, customer specifications, safety requirements, and quality standards associated with DoD manufacturing. SimTech offers a market-leading compensation and benefits package, work/life balance, an outstanding retirement plan, career growth opportunities, and much more. Responsibilities Part Preparation Clean and prepare components for painting/coating in accordance with approved procedures. Perform masking, plugging, taping, and other preparation activities to protect designated surfaces and features. Inspect parts for cleanliness, surface condition, contamination, and other conditions that could affect coating quality. Prepare and install racks, hooks, fixtures, and other devices used to safely support parts during the coating process. Hang and position parts to ensure proper access and coverage during coating operations. Perform part identification, marking, labeling, and traceability activities as required. Handle parts carefully to prevent damage, contamination, or loss of identification. Coating Process Support Support painters'/coating applicators before, during, and after coating operations. Verify parts are properly prepared and presented to the coating operation. Assist with maintaining proper workflow and part sequencing through the paint area. Monitor parts for obvious coating defects and notify the appropriate personnel when issues are identified. Support coating thickness and visual inspection activities as authorized by applicable procedures. Segregate nonconforming parts and assist Quality personnel with disposition and rework activities. Materials and Shop Support Maintain inventory of paint-shop consumables, including masking materials, plugs, tape, solvents/cleaners, rags, hooks, racks, and other supplies. Notify supervision of material shortages and assist with maintaining appropriate inventory levels. Properly identify, store, and handle coating materials and related chemicals in accordance with applicable requirements. Maintain organized workstations, racks, fixtures, and paint-shop storage areas. Perform routine housekeeping throughout the paint and coating area. End-of-Shift Activities Clean paint guns, hoses, equipment, tools, and associated work areas. Complete required equipment cleaning and shutdown activities. Properly dispose of waste and contaminated materials in accordance with established procedures. Return tools, fixtures, racks, and materials to designated locations. Verify the paint area is clean, safe, organized, and ready for the next production shift. Complete required production, inspection, inventory, and housekeeping documentation. Quality and Compliance Follow applicable work instructions, drawings, specifications, process sheets, and standard operating procedures. Maintain product traceability throughout the paint/coating process. Follow applicable customer and DoD coating requirements. Identify and communicate quality concerns immediately. Support corrective action and rework activities as directed. Maintain compliance with company EHS requirements and chemical handling procedures. Protect government/customer property and controlled materials as applicable. Perform other duties assigned in support of this effort. Minimum Qualifications & Education Requirements and Desired Skillsets Required High school diploma or GED preferred Previous manufacturing, paint preparation, industrial coating, body-shop, aerospace, automotive, or related experience preferred. Ability to read and follow written work instructions. Strong attention to detail and ability to recognize defects or irregularities. Ability to work effectively in a production environment. Ability to safely handle parts, racks, fixtures, tools, and coating-related materials. Ability to wear required PPE and work in a paint/coating environment. Ability to maintain accurate part identification and traceability. Ability to work independently while also functioning effectively as part of a production team. U.S. Citizenship required. Preferred Qualifications Experience in aerospace, defense, automotive, or other highly regulated manufacturing environments. Experience with industrial painting or coating processes. Experience with masking and surface preparation. Experience with coating thickness measurement. Familiarity with military, aerospace, or customer-specific coating specifications. Experience working from engineering drawings and manufacturing work instructions. Experience with ERP/MRP systems and production documentation. Familiarity with Lean Manufacturing, 5S, and continuous improvement principles. Experience with chemical handling and paint-shop safety requirements. Knowledge, Skills, and Abilities The successful candidate should demonstrate: Excellent attention to detail. Strong mechanical aptitude. Good hand and eye coordination. Ability to distinguish acceptable versus unacceptable surface conditions. Ability to follow standardized processes consistently. Ability to maintain accurate documentation and traceability. Ability to identify and communicate problems before they affect downstream operations. Strong housekeeping and organizational habits. Ability to prioritize work in a production environment. Commitment to quality, safety, schedule, and customer requirements. Physical Requirements Ability to stand and walk for extended periods. Ability to frequently bend, stoop, reach, kneel, and work in various positions. Ability to lift and move parts and materials consistent with established job requirements. Ability to safely maneuver racks, fixtures, carts, and production materials. Ability to work while wearing required PPE, including respirators when applicable. Ability to work in a manufacturing environment with exposure to paint/coating processes, chemicals, odors, noise, and temperature variations. Work Environment & Expectations The position is primarily performed in a manufacturing paint/coatings environment. Employees may be exposed to industrial coatings, cleaning agents, solvents, dust, noise, and other manufacturing-related conditions. Appropriate PPE and safety controls are required. The position may require overtime, weekend work, or schedule flexibility based on production requirements. Performance Expectations Success in this position will be measured by: Quality of part preparation. Paint/coating process throughput. First-Pass Yield. Proper masking and part identification. Compliance with work instructions and customer requirements. Accurate material and consumable control. Proper equipment cleaning and end-of-shift closeout. Housekeeping and 5S performance. Safety and environmental compliance. Reliable attendance and schedule adherence. Effective communication with Production, Quality, Engineering, and Supply Chain. About SimTech, Inc. Founded in 1983, SimTech, Inc. is a Huntsville-based defense contractor providing advanced engineering, modeling and simulation, test and evaluation, cyber, hardware and software, and manufacturing solutions in support of our nation's defense. SimTech continues to experience significant growth, expanding our workforce, programs, capabilities, and manufacturing operations over the past year. Recognized as a Best Place to Work and a Best Place for Working Parents from 2022–2026, SimTech offers a competitive compensation and benefits package, exceptional retirement benefits, work/life balance, and opportunities for career growth. Learn more about SimTech at www.simtechinc.com. Equal Employment Opportunity and Affirmative Action Employer SimTech, Inc. is an Equal Opportunity/Affirmative Action Employer. SimTech, Inc. is a committed EOE/Vet/Disabled employer. Simulation Technologies, Inc. (SimTech) is an Equal Employment Opportunity employer and provides reasonable accommodation for qualified individuals with disabilities and disabled veterans in its job application procedures. If you have any difficulty using our online system and you need an accommodation due to a disability, you may use the following email address, HR@simtechinc.com and/or phone number (256.428.2910) to contact us about your interest in employment with SimTech. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, citizenship, ancestry, marital status, protected veteran status, disability status or any other status protected by federal, state, or local law. SimTech participates in E-Verify. Job Posted by ApplicantPro

Job Description We are looking to hire Plumbers Helpers to assist on a commercial construction job site We offer competitive pay and comprehensive benefits Full Time/ Long Term Work, weekly pay through direct deposit. Responsibilities: • THE JOB: The ideal candidate will perform detail-oriented tasks involving physical labor on commercial construction sites, • Candidates will ideally posses a commercial construction background, • Candidate will be required to operate a wide range of hand and power tools; Hammer drills, grout mixers, small hoists, impact wrenches, measuring equipment and a variety of other equipment and instruments, • Duties will include but are not limited to; cleaning and preparing worksites, performing layouts, handling of heavy material, drilling holes for anchors, Qualifications: • Previous experience in commercial construction, • Ability to lift 50 –75 lbs when necessary during the course of performing their necessary duties., • Work outside during all types of weather., • Work under time constraints efficiently and have the ability to work well with others., • Must have knowledge and/or experience with power and hand tools., • Must adhere to all safety policies and wear Personal Protective Equipment (PPE) at all times\nCompany Description We offer an extensive network of professionals, developed over 50 years of combined experience. Our business structure is simple - there is no bureaucracy to struggle with. We offer an extensive network of professionals, developed over 50 years of combined experience. Our business structure is simple - there is no bureaucracy to struggle with.

Job Description PURPOSE OF POSITION: The Fitter is responsible for preparing, assembling, fitting, and aligning metal components prior to welding or final installation. This role requires a strong commitment to quality, craftsmanship, and precision, including the ability to read, accurately measure and mark materials, and ensure all assemblies meet project specifications and established quality standards. The Fitter upholds safety, accountability, and integrity by following approved work practices, maintaining organized work areas, and ensuring components are properly prepared to support safe and efficient welding and installation. Working closely with welders and site supervision, the Fitter demonstrates teamwork, clear communication, and respect, contributing to smooth workflow and successful project execution. Through attention to detail and a focus on continuous improvement, the Fitter supports reliable, high‑quality fabrication and installation while reinforcing the company’s standards, values, and reputation for excellence. RESPONSIBILITIES: Fitting & Assembly • Measure, mark, cut, and fit metal components according to drawings and specifications., • Assemble piping, or mechanical components for welding., • Perform tack welding as required (if qualified)., • Verify fit‑up, clearances, and dimensions before final welding or installation. Blueprint Reading & Layout • Read and interpret blueprints, shop drawings, isometrics, and prefabricated components, • Lay out materials using squares, levels, tapes, and measuring devices., • Identify discrepancies in drawings and report issues to supervision. Tools & Equipment • Operate hand tools, power tools, grinders, cutting torches, and measuring instruments safely., • Prep materials by grinding, beveling, grooving, cleaning, and removing defects., • Maintain tools and ensure equipment is in proper working condition. Quality & Compliance • Ensure fit‑ups meet project tolerances and quality standards., • Assist with inspections and resolve fit‑up issues prior to welding., • Follow company procedures, project requirements, and applicable codes. Safety & Housekeeping • Follow all jobsite safety procedures, including PPE and hot‑work requirements., • Maintain a clean, organized, and safe work area., • Identify hazards and communicate issues promptly. Coordination & Teamwork • Work closely with welders, supervisors, and other trades., • Communicate clearly regarding material needs, progress, and field conditions., • Support project schedules and production goals. QUALIFICATIONS: Required • 3+ years of experience as a Fitter in industrial, structural, or mechanical environments., • Strong ability to read blueprints, shop drawings, and welding symbols., • Proficiency with measuring tools and layout techniques., • Knowledge of fit‑up tolerances and preparation for welding., • Ability to work in physically demanding conditions., • Strong attention to detail and workmanship quality., • Valid driver’s license and reliable transportation. Preferred • Experience working with carbon steel and structural steel components., • Ability to perform tack welding (certification preferred if required)., • Experience supporting welding processes such as SMAW or FCAW., • OSHA 10 or OSHA 30 certification., • Prior experience on industrial, government, or large commercial projects. WORKING CONDITIONS: • Jobsite environment—indoors, outdoors, and potentially in confined spaces or elevated areas., • Requires standing for prolonged periods of time, bending, climbing, lifting 50+ lbs, and working with tools., • Exposure to noise, heat, sparks, and heavy materials., • Work may involve travel between job sites. COMPENSATION & BENEFITS: • Competitive hourly wage, • Health, dental, and vision insurance, • Retirement plan, • Paid time off and holidays, • Training and advancement opportunities RELEVANT INFORMATION: This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job‑related instructions and to perform any other job‑related duties requested by their supervisor.

Job Description At Strata-G, we know it takes talented and dedicated people to deliver solutions for a greater cause, and we consider our employees to be our greatest asset. We are a growing, dynamic organization offering diverse challenges to innovative professionals. We are seeking a skilled Electrical Technician to support our electrical assembly, testing, and repair operations in a controlled manufacturing environment. This role works across production and repair & return (R&R) activities and offers the opportunity to grow from foundational assembly tasks into advanced component-level diagnostics and repair. This is a fully on-site position in Huntsville, AL. What You'll Do • Assemble, test, troubleshoot, and repair electrical and electromechanical assemblies, • Perform IPC-compliant soldering and rework on PCBs and wiring harnesses, • Use diagnostic tools such as multimeters, oscilloscopes, and automated test equipment, • Interpret schematics, work instructions, and engineering documentation, • Document repairs and test results in ERP/MES systems, • Support quality, root cause analysis, and continuous improvement efforts, • Work in an ESD-controlled environment following strict safety and quality standards, • Maintain clean, organized work areas consistent with 5S and lean practices, • Escalate issues to senior technicians or supervisors when encountering unfamiliar defects or failures What We're Looking For • 0-4 years of electronics assembly or repair experience, • Strong attention to detail and documentation accuracy, • Ability to read schematics and follow controlled processes, • Basic soldering proficiency; IPC/WHMA-A-620, IPC-J-STD-001 preferred, • Basic understanding of ESD controls and safe handling practices, • Active SECRET security clearance, • Ability to lift 25-40 lbs. as required, • Ability to sit or stand for extended periods Job Posted by ApplicantPro

Job DescriptionMUST BE LOCAL TO THE HUNTSVILLE AREA – NO TRAVELERS – NO PER DIEM Way Mechanical is a mechanical and plumbing contractor located in Austin, San Antonio, Dallas, Fort Worth, Houston, Charlotte, Raleigh, Tulsa, and Nashville. We specialize in commercial air conditioning, plumbing, piping, service, and the maintenance of these systems. We are currently seeking a Piping Foreman to join our team. Way Mechanical is a great place to work and build a career! Responsibilities: • Supervise and lead a crew of pipefitters on a project, • Order all materials for each crew, • Develop look-ahead schedule based on project needs, • Interact with the customer, GC, Owner, and inspectors, • Attend job-site meetings, • Supervise pipe installation and equipment setting, • Manage production at the jobsite to meet the estimated labor hours, • Schedule and manage material and prefab deliveries from our Shop, • Piping systems include Chilled Water, Heating Water, Refrigeration, Condensate, Steam, and Condenser Water piping, • Understand installation of piping systems according to the contract drawings, specifications, shop drawings, details, and code requirements, • Keeps the work area clean and in an orderly condition. Follows all company and jobsite / OSHA safety regulations, • Supervises pipe testing and flushing per project requirements, • Good leadership and communication skills Qualifications: • Have 5+ years of Commercial work experience, • Able to stand, lift, put together, pull, and place objects weighing less than or equal to 50 lbs. without assistance, • OSHA 30 preferred, • Reliable transportation, • Tools of your trade, • Always committed to safety, • Excellent attendance Perks Of The Trade: • Medical, Dental, Vision, Life Insurance, • Profit Sharing Program, • 401K Retirement, • Weekly Pay, • Referral Bonuses, • 7 days of holiday pay, • Years of Service Appreciation Program

Job DescriptionMUST BE LOCAL TO THE HUNTSVILLE AREA - NO TRAVELERS - NO PER DIEM Way Mechanical is located in San Antonio, Dallas, Austin, Houston, Nashville, Huntsville, Tulsa, Raleigh, Charlotte, and Orlando. We specialize in commercial air conditioning, plumbing, piping, and the maintenance of these systems. Way Mechanical is at the forefront of building, design assist, preconstruction, commissioning, building information modeling, and quality control. Way Mechanical is currently in need of a Pipefitter Superintendent to join the team! Requirements: • Able to pass a drug test, • Legally eligible to work in the US, • High school diploma, • Current driver’s license, • Proficient in the English language, • Must have Commercial Pipefitting experience, • 7-10 years of experience running Pipefitting projects, • Line out all field employees in the region based on project needs, • Attend bi-weekly Job Cost Meetings with specific answers for every project in the region, • Report to corporate headquarters daily, • Establish a relationship with the regional General Manager and communicate with them daily, • Train your foreman and potential foreman, • Read, understand, and analyze blueprints and specifications, • Prepare, understand, and analyze blueprints and specifications, • Full knowledge of chilled water, heating water, condenser water systems, and different materials used, • Work with fellow employees with a respectful and tolerant attitudeTypical duties include but are not limited to:, • Line out employees each day for your region, • Work necessary hours to hit mandatory deadlines, • Ensure your Foreman fills out Daily Reports, 3 Week Look Ahead, percent complete on project, and make them accountable to turn in employees’ time, • Communicate with Project Managers and Foremen, and the General Manager every day, • Attend on-site meetings with Mechanical and GC when necessary, • Ensure Foreman installs the highest quality product, • Represent Way Mechanical in a professional mannerPerks of the Trade:, • Medical, Dental, and Vision, • Paid Time Off & Paid Holidays, • Weekly Pay, • 401K, • Profit Sharing, • Company phone, • Years of Service Appreciation Program

Job Description D7 Pneumatics LLC is a trusted leader in the fire protection and pneumatic systems industries. We pride ourselves on delivering high-quality, reliable, and innovative solutions for a variety of sectors. We are looking for a motivated and detail-oriented Certified Sprinkler Fitter to join our team. This role offers an excellent opportunity to apply your technical expertise and contribute to safety, efficiency, and the quality of our installations. Job Overview: As a Certified Sprinkler Fitter at D7 Pneumatics LLC, you will be responsible for the installation, maintenance, and repair of fire sprinkler systems, ensuring that projects meet high-quality standards and are completed safely and efficiently. You will collaborate with other team members and provide technical guidance to apprentices and other field personnel. You will play a key role in ensuring projects are executed according to specifications and safety regulations. Key Responsibilities: • Coordinate with the Superintendent/Foreman: Work closely with the Superintendent/Foreman to determine the most efficient methods for completing assigned and special projects., • Material and Equipment Management: Help assess and determine the material, tools, and equipment needed for the successful completion of each job, ensuring timely and accurate procurement., • Quality and Safety Assurance: Ensure adherence to quality and safety controls, maintaining a safe work environment and delivering projects with zero time lost due to accidents or safety incidents., • Care and Maintenance of Company Property: Take responsibility for the proper use and care of all company-issued vehicles, equipment, and tools, protecting them from damage, deterioration, or theft. Ensure that all company property is kept clean and well-maintained., • Training and Development: Assist in the development and training of field personnel on proper installation procedures, promoting a high level of professionalism and safety awareness among the team., • Technical Consultation: Provide technical support and advice to apprentices, technicians, designers, and shop employees to resolve issues and maintain high installation standards., • Additional Duties: Respond to other responsibilities assigned by the Labor Supervisor and/or Project Foreperson, contributing to team success and project efficiency., • Other Duties as Assigned: Undertake additional tasks as requested by management, ensuring the smooth operation of projects and the company. Qualifications: • REQUIRED: 3 or more years of experience installing sprinkler systems, • Preferred: 5 or more years of experience installing sprinkler systems, • Ability to read and interpret blueprints, schematics, and technical drawings., • Skilled in the use of tools and equipment related to sprinkler fitting and fire protection systems., • Excellent problem-solving, troubleshooting, and diagnostic abilities., • Demonstrated ability to work safely in accordance with OSHA regulations and company safety protocols., • Strong communication skills, both written and verbal, with the ability to work effectively with team members, apprentices, and management., • Capable of lifting heavy materials (up to 50 lbs) and working in a variety of environments, including confined spaces and elevated areas., • Ability to take initiative and complete tasks with minimal supervision., • Must have a valid driver’s license and a clean driving record.

Job Description Strata-G Solutions is seeking a highly skilled and detail-oriented Senior Electrical Technician to join our dynamic and fast-paced team. In this role, you will be responsible for assembling, modifying, testing, and inspecting electrical assemblies, harnesses, and wiring systems to support mission-critical programs. This is a hands-on position ideal for someone with a strong background in cable harness fabrication and electrical assembly, especially in aerospace, defense, or military-standard environments. This is a fully on-site position located in Huntsville, AL. This is eligible for a sign-on bonus. Key Responsibilities: • Assemble electrical harnesses and devices including switches, relays, and circuit boards according to engineering drawings, schematics, and military specifications (MIL-SPEC)., • Integrate circuit card assemblies into various types of chassis and enclosures., • Read and interpret technical documents, including schematics, blueprints, wiring diagrams, and work process specifications., • Perform wire cutting, stripping, pinning, and harness assembly, including application of heat shrink and marker sleeves., • Conduct in-process and final quality inspections; perform continuity testing on cables and sub-assemblies., • Use a variety of tools including soldering irons, crimpers, wire strippers, screwdrivers, heat guns, power crimpers, solder sleeves, cable testers, and pull testers., • Modify, rework, and reassemble prototype and production-level hardware., • Follow written, oral, and diagram-based instructions to complete assignments with accuracy., • Support ongoing process improvements and collaborate with engineering teams., • Perform other duties as assigned. Required Qualifications: • High school diploma or GED., • Minimum of 5-10 years of hands-on experience in cable harness building and electrical assembly., • Active U.S. Security Clearance (Required for consideration)., • Experience with mechanical/electrical fabrication, cable assembly, and connector integration., • Ability to interpret complex wiring schematics, engineering drawings, and technical manuals., • Proven experience using a wide range of fabrication tools and techniques., • Strong attention to detail and manual dexterity for precision work., • Ability to work independently and as part of a collaborative team in a high-tempo environment. Preferred Qualifications: • IPC/WHMA-A-620 Certification (Cable Harness Assembly), • J-STD-001 (Soldering Certification), • IPC-A-610 (Electronic Assemblies), • Familiarity with test equipment (DITMO, O-scope, etc.), • Experience in missile assembly, ordnance, or deliverable military hardware., • Excellent communication skills and a willingness to adapt and innovate in a mission-driven setting. Job Posted by ApplicantPro

Job DescriptionBenefits: • Bonus based on performance, • Employee discounts, • Free uniforms Are you an experienced painter who takes pride in their work? If so, we want to hear from you! CertaPro Painters is seeking an Experienced Painter to join our team and start painting immediately. We offer a busy schedule with on-time pay and treat our painters like family. As an experienced painter, you know that attention to detail is key. At CertaPro Painters, we value this skill and are looking for painters who are passionate about their craft. If you have experience working on residential and commercial projects and can complete work orders promptly and professionally, apply today! We're looking for someone who is deadline and detail-oriented, physically capable of handling the workload and dedicated to providing excellent customer service. At CertaPro Painters, we take pride in our work and want you to feel the same way. We encourage you to apply if you have at least three years of verifiable painting experience and looking to grow with us! Apply now to join our team of skilled painters and start working on exciting projects today!

Description \n Looking for an opportunity to make an impact? \n At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainable. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. \n Your greatest work is ahead! \n Leidos’ Defense Systems Electronic Manufacturing Facility is seeking a Weekend Shift Cable Assembly Technician to join our team at our Electronics Manufacturing Facility. The successful candidate will support different programs ranging from commercial customers to DoD customers. The technician will be responsible for building cables in accordance with engineering drawings and work instructions. Responsibilities include cable construction, basic testing, troubleshooting, and repair. \n If this sounds like the kind of environment where you can thrive, keep reading! \n Leidos Defense Systems Sector / Manufacturing provides a diverse portfolio of systems, solutions, and services covering land, sea, air, space, and cyberspace for customers worldwide. Solutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support. Our team is solving the world’s toughest security challenges for customers with “can’t fail” missions. To explore and learn more, click here! \n Are you ready to make an impact? Apply and share your resume with us today! \n Primary Responsibilities \n\n • Build, troubleshoot, and repair cable assemblies. \n, • Working knowledge and use of tools used for cable manufacturing (strippers, crimpers, solder iron).\n, • Interpret engineer drawings, electrical schematics, and technical specifications.\n, • Candidates must have experience working with design engineers, manufacturing engineers, and other technicians to develop a strategy and identify any problems that could occur during assembly.\n, • Perform basic troubleshooting to find faults in signal and connectivity issues.\n\n Basic Qualifications \n\n • Candidates must possess a High School diploma/GED with 2-4 years of cable building and/or electrical/mechanical assembly experience.\n, • Working knowledge of specialized tools and equipment used during cable assembly process.\n, • Must be a US Citizen and possess (and be able to maintain) Final Secret Clearance OR meet the eligibility to obtain a Secret Clearance.\n, • This is a weekend shift position Friday- Sunday. Regular attendance is required\n\n Preferred Qualifications \n\n • Current or prior certification in IPC/WHMA-A-620 with Space addendum.\n, • Current or prior certification in J-STD-001.\n, • Ability to test cable assemblies for continuity, isolation, insulation resistance, and insertion loss.\n\n If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. Original Posting:August 10, 2026\n\n \n \n \n \n \n \n \n For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. \n \n \n \n \n \n \n\n\n Pay Range:Pay Range $48,100.00 - $86,950.00\n \n The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. \n \n About Leidos \n \n Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit www.Leidos.com. \n \n Pay and Benefits \n \n Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at www.leidos.com/careers/pay-benefits. \n \n Securing Your Data \n \n Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com. \n If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the U.S. Federal Trade Commission. \n \n Commitment to Non-Discrimination \n \n All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

We are seeking a hands-on Cable Assembly Technician to support the build, troubleshooting, and repair of cable assemblies. This role is a strong fit for someone with electrical/mechanical assembly experience who is comfortable reading technical drawings, using cable manufacturing tools, and working closely with engineering teams. Schedule: Monday–Thursday, 4:00 PM–2:30 AM Day-to-Day Responsibilities • Build, troubleshoot, and repair cable assemblies., • Use cable manufacturing tools including wire strippers, crimpers, and soldering irons., • Read and interpret engineering drawings, electrical schematics, and technical specifications., • Partner with design engineers, manufacturing engineers, and technicians to plan assembly work and identify potential issues., • Perform basic troubleshooting of signal and connectivity problems., • Follow established cable assembly and quality standards. Required Qualifications • High School Diploma or GED., • 1–3+ years of cable building and/or electrical/mechanical assembly experience., • Hands-on experience with specialized cable assembly tools and equipment., • Current IPC/WHMA-A-620 certification., • Current J-STD-001 certification., • Must be a U.S. Citizen., • Must currently possess a Final Secret Clearance or be eligible to obtain and maintain a Secret Clearance., • Ability to work 2nd shift, Monday–Thursday from 4:00 PM–2:30 AM.