Inspection jobs in Hauppauge, New YorkCreate job alerts

• PAY THAT ADDS UP. - Local: Weekly pay up to $2,100 Regional: Weekly pay up to $2,000, • HOME TIME BUILT AROUND YOUR ROUTE. - Home daily on local runs, home weekly on regional freight, • DEDICATED FREIGHT, EVERY ROUTE - 100% dedicated tanker, dry van, and refrigerated freight At NFI, drivers aren't just filling a seat, they're the reason freight moves on time. Every route, local or regional, runs on dedicated freight, so you know your freight, your customers, and your schedule. NFI backs every driver with modern equipment, real support, and a schedule built around getting you home. • Weekly pay up to $2,000, with a weekly minimum guarantee of $1,400 on select accounts.*, • Sign-on bonus up to $5,000 depending on account.*, • Home weekly, with schedules that vary by account, including set evening start times and, on select routes, possible midweek home time., • Dedicated freight on regional accounts, including major brand-name freight partners, dry van, and refrigerated loads, with no-touch, drop & hook freight and drop & hook pay available on select accounts., • Safety, referral, and inspection bonuses, including a $2,000 referral bonus on select accounts.*, • Weekly pay up to $2,100, with routes ranging $1,225-$2,100 depending on account and schedule.*, • Sign-on bonus of $2,500., • Home daily, with multiple shifts available including dedicated PM schedules., • Dedicated tanker, dry van, and refrigerated freight, with drop & hook and touch freight accounts available depending on route., • Safety, referral, and inspection bonuses available., • Coverage that backs you up. Medical, dental, vision, and prescription drug coverage available to all eligible employees., • Planning for the road ahead. A 401(k) plan, wellness program, and life insurance are part of the full benefits package., • Time to recharge. Paid time off and paid parental leave, along with additional benefit plan options, round out the package., • Late-model fleet with advanced safety technology, backed by our own in-house shops and technicians. All pay and bonus amounts vary by route, location, experience level, and performance and are subject to change based on company discretion. Talk with a recruiter to confirm specific details for your route. There is no deadline to apply. Applications are accepted on an ongoing basis. • Valid Class A CDL, • 6+ months to 1+ years of tractor-trailer experience depending on location, • Minimum 21 years of age

• PAY THAT KEEPS YOU ROLLING - Average $1,500-$1,700 per week*, • START STRONG - $2,500 sign-on bonus, • HOME DAILY. EVERY DAY. - Local dedicated routes with consistent schedules At NFI, drivers are the backbone of a dedicated refrigerated fleet built to run right. With a focus on consistency, safety, and support, NFI gives drivers a schedule and a fleet they can count on, day in and day out. If you're looking for steady local work with a company that invests in its equipment and its people, NFI is worth a serious look. • Strong, steady pay. Average $1,500-$1,700 per week,* with pay reflecting the consistency of a dedicated local schedule., • Dedicated routes. Home daily. Run local, dedicated refrigerated routes out of Islandia, NY, with touch freight deliveries, predictable scheduling, and consistent routes across upstate NY, getting you home every day., • Get paid to get started. $2,500 sign-on bonus, • Modern equipment built for the job. Drive a late-model fleet equipped with advanced technology and safety features., • Coverage that starts day one. Medical, dental, vision, and prescription drug coverage begin your first day, along with 401k, wellness, life insurance, paid time off, and paid parental leave., • Bonuses that add up. Safety, referral, and inspection bonuses available.*, • Backed by real shop support. Dedicated in-house maintenance keeps trucks and trailers road-ready. *All pay and bonus amounts may vary by job type, location, experience level, and performance and are subject to change based on company discretion. *Talk with a recruiter to confirm specific details. There is no deadline to apply. Applications are accepted on an ongoing basis. • Valid Class A CDL, • Minimum 12 months of relevant tractor-trailer experience, • Minimum 21 years of age, • Must meet all applicable DOT qualifications

Job DescriptionMavis Tires & Brakes at Discount Prices - Automotive MechanicsPut your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for full-time Automotive Mechanics to join Team Mavis at one of our state-of-the-art automotive service, repair, and tire sales centers in the Selden, NY area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States.About the Position of Automotive MechanicAs Mavis's leaders in undercar repairs, our Automotive Mechanics are trusted to inspect, diagnose, and perform a wide variety of automotive services on customers' vehicles. Mavis's Automotive Mechanics perform a wide variety of undercar repairs, including brakes, struts, and shocks. Automotive Mechanics are also responsible for completing state-mandated inspections, changing oil and filters, checking fluids, replacing worn parts, and dismounting, mounting, rotating, and balancing tires.Employee BenefitsAt Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement.QualificationsWe recruit team members who share our commitment to providing complete customer satisfaction and delivering the highest quality service. To be eligible for the position of Automotive Mechanic, you must (1) be at least 18 years of age; (2) be legally authorized to work in the United States; (3) possess 2 years of experience and/or training in automotive repair and maintenance or any combination of education, training and experience which demonstrates the ability to perform the duties and responsibilities of the position; and (4) possess an extensive tool box of personal tools used in performing undercar repairs.The following additional qualifications are preferred: (1) state inspection license(s); and (2) ASE Certifications in Automotive Maintenance and Light Repair (G1), Suspension and Steering (A4), and Brakes (A5).As an active position, Automotive mechanics are required to stand, walk, bend, kneel, stoop, crouch, crawl, climb, pull, reach and perform repeated and repetitive movements consistent with vehicle maintenance and automotive repair. Mechanics must regularly lift and/or move items weighing over 50 pounds.What are you waiting for? APPLY NOW!Candidates can apply online at www.mavis.com/careers. OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995.For more information about Mavis, please visit www.mavis.com.Mavis is an Equal Opportunity Employer Job Posted by ApplicantPro \nCompany Description Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value. We're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today! Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value.\r\n\r\nWe're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today!

Job DescriptionPEP BOYS / Mavis Tire - Automotive MechanicsCompetitive Weekly Pay + Weekly Incentive Compensation | Full-Time | Career Growth OpportunitiesPep Boys is now part of the Mavis Tire family-and we're growing our team!We're looking for experienced, full-time Automotive Mechanics to join Team Mavis at our automotive service, repair, and tire sales centers in the Bay Shore, NY area.As part of the Mavis family, you'll have the stability of joining the nation's largest automotive service organization, with more than 4,000 locations, competitive weekly pay, excellent benefits, and opportunities to grow your career.About the PositionAs an Automotive Mechanic, you'll inspect, diagnose, and perform a variety of automotive maintenance and repair services to help keep our customers safely on the road.Responsibilities include:Performing undercar repairs, including brakes, struts, shocks, suspension, and steeringDiagnosing vehicle maintenance and repair needsPerforming oil and filter changes and checking fluidsReplacing worn or damaged partsCompleting state inspections, where applicableMounting, rotating, and balancing tiresMaintaining Mavis standards for quality, safety, and customer serviceWhy Join Team Mavis?We offer our Automotive Mechanics:Competitive weekly pay + weekly incentive compensationMedical, dental, and vision insurance401(k) with employer matchPaid vacation, PTO, and holidaysLife insuranceOn-the-job trainingOpportunities for career growth and advancementA stable, team-oriented work environmentQualificationsTo be eligible, you must:Be at least 18 years of age and legally authorized to work in the United StatesHave at least 2 years of automotive repair and maintenance experience and/or training, or an equivalent combination of education, training, and experienceHave the personal tools necessary to perform automotive and undercar repairsPreferred: State inspection license(s) and ASE Certifications, including Automotive Maintenance and Light Repair (G1), Suspension and Steering (A4), and Brakes (A5).Physical RequirementsAutomotive Mechanics must be able to stand, walk, bend, kneel, stoop, crouch, crawl, climb, pull, reach, and perform repetitive movements associated with automotive repair. Mechanics must also be able to regularly lift and/or move items weighing more than 50 pounds.Ready to Join Our Team? APPLY NOW!Apply online at mavis.com/careers.OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview.Questions? Call our Recruitment Department toll-free at 844-375-3995.Join Pep Boys and Team Mavis-and build your career with a growing automotive leader.Mavis is an Equal Opportunity Employer. Job Posted by ApplicantPro \nCompany Description Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value. We're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today! Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value.\r\n\r\nWe're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today!

Job Description Truck & Equipment Fleet Mechanic - Sayville, NY Top Pay • Busy Shop • Year-Round Work Pat's Service Center is looking for an experienced Truck & Equipment Fleet Mechanic to join our growing team. We are a busy, family-owned fleet repair shop with steady work. We service cars, trucks, trailers, and equipment, so every day brings something different. Responsibilities • Diagnose and repair trucks and equipment, • Engine diagnostics, repair, and replacement, • Electrical and computer diagnostics, • Air brake, suspension, and steering repairs, • Preventative maintenance and inspections, • Troubleshoot drivability concerns Requirements • Valid driver's license, • Own professional tools A Plus, But Not Required • NYS Inspection License What We Offer • Top pay based on experience, • Health insurance, • Paid holidays, • Paid vacation, • Paid sick/personal time, • Uniforms provided, • Full-time, year-round work, • Opportunity to grow with an expanding company If you're an experienced Truck & Equipment Fleet Mechanic looking for a busy shop with steady work, great pay, and the opportunity to grow, we'd love to hear from you. Apply today! \nCompany Description For more than 30 years, owner John Marra has built a reputation for honesty, quality workmanship, and integrity, making Pat's Service Center a trusted name in the community. As we continue to grow, we're investing in the future by renovating and modernizing our entire facility. We're excited to expand our services into medium and heavy-duty truck, trailer, and construction equipment repair, creating new opportunities for both our customers and our team. For more than 30 years, owner John Marra has built a reputation for honesty, quality workmanship, and integrity, making Pat's Service Center a trusted name in the community. As we continue to grow, we're investing in the future by renovating and modernizing our entire facility. We're excited to expand our services into medium and heavy-duty truck, trailer, and construction equipment repair, creating new opportunities for both our customers and our team.

Job Description Automotive Technician-Sayville Looking for a Shop That Keeps You Busy? Pat's Service Center is growing and looking for an experienced Automotive Technician to join our team. If you take pride in your work, enjoy working on a variety of vehicles, and want to be part of a busy shop with steady work, we'd love to talk to you. We work on cars, light and medium-duty trucks, and equipment, so every day brings something different. We're looking for someone who enjoys fixing vehicles the right way and takes pride in quality workmanship. What You'll Be Doing • Perform repairs and maintenance on foreign and domestic vehicles, • Brakes, suspension, steering, and front-end repairs, • Engine repairs and general mechanical work, • Oil changes, tune-ups, and preventative maintenance, • NYS Safety and Emissions Inspections, • Diagnose and repair a variety of mechanical concerns, • Work alongside our team to keep customers safely on the road What We're Looking For • Minimum 3 years of automotive repair experience, • Strong mechanical and troubleshooting skills, • NYS Inspection License, • Valid driver's license, • Own professional tools, • Someone who takes pride in their work and enjoys being part of a team What We Offer • Top pay based on experience, • Health benefits, • Paid holidays, • Paid vacation, • Paid sick/personal days, • Uniforms provided, • Busy shop with steady work year-round, • Clean, modernizing facility, • Opportunity to grow with our expanding company If you're looking for a shop that values quality work, keeps its technicians busy, and offers the opportunity to grow, we'd love to hear from you. \nCompany Description For more than 30 years, owner John Marra has built a reputation for honesty, quality workmanship, and integrity, making Pat's Service Center a trusted name in the community. As we continue to grow, we're investing in the future by renovating and modernizing our entire facility. We're excited to expand our services into medium and heavy-duty truck, trailer, and construction equipment repair, creating new opportunities for both our customers and our team. For more than 30 years, owner John Marra has built a reputation for honesty, quality workmanship, and integrity, making Pat's Service Center a trusted name in the community. As we continue to grow, we're investing in the future by renovating and modernizing our entire facility. We're excited to expand our services into medium and heavy-duty truck, trailer, and construction equipment repair, creating new opportunities for both our customers and our team.

Job DescriptionTruck (B) Mechanic - Full-time / Part-time (Flexible Hours) Fab-Tex, a busy medium/ heavy duty truck upfitter/dealer located in western Suffolk, NY, is expanding its service team. We are currently looking to hire a Truck Mechanic who is willing to grow with our company. Responsibilities: • Perform required inspections and preventive maintenance on vehicles and equipment, including tractors, trailers, light-duty vehicles, dump trucks, and more., • Complete vehicle inspection report write-ups timely and efficiently., • Diagnose the cause of any malfunction and perform repairs to correct specifications including, but not limited to, engines, transmissions and suspension, fuel and ignition system, and exhaust, intake, electrical, mechanical, brake, and HVAC systems., • Problem solve/ quality check while following procedures including documenting all work performed on work orders., • Inspect reports, list of repairs and parts, identify root cause of basic failures/ conditions to fix as required, replace defective components, and utilize diagnostic computers when applicable.Requirements:Minimum 2 (TWO) years of experience, • Diesel engine repair: 2 years (preferred), • Mechanical knowledge: 2 years (preferred), • The mechanic must provide own tools necessary to perform maintenance, repair and diagnostics., • Maintain a high level of professionalism, motivation, focus, and organization., • Current and valid driver’s license (CDL preferred, but not mandatory)., • Must have great communication skills within a team environment., • Can work in a face-paced shop without sacrificing quality of work.Physical Demands:The physical demands described here are a representation of those that must be met by an employee to successfully perform the essential functions of this job., • The employee is required to stand, walk, grasp tools, hear, balance, stoop, kneel, crouch, sit for an extended time period, lift/ move up to 25 lbs, and have good vision., • Working conditions: Large facility, overhead cranesAt Fab-Tex, we offer outstanding benefits:TrainingOvertime availableSteady workBenefitsPaid holidaysVacation/ sick timeBonus plan Job Type: Full Time or Part time Salary based on experience: $30-$45.00 per hour Schedule: • Monday-Friday, • Flexible Hours, • Full-time Day Shift: Mon-Fri 7am- 5:30pm, • Part-time: 3-5 days, Flexible hours (Day or Night), • Shifts Available: Mon-Fri 7-5:30pm / Mon-Fri 8-1:00pm ALL SHIFTS ARE FLEXIBLE, • Overtime available, on average 10 hours a week overtime, • Weekend availabilityWork location: one location Affirmative action statement: Fab-Tex and its subsidiaries are equal opportunity employers and do not discriminate against applicants or employees in hiring, job assignments, probation, discharge, or other conditions of employment on the basis of an individual’s race, sex, ethnicity, age, disability, marital status, sexual orientation, religion, national origin, citizenship status or arrest record. Fab-Tex also strictly prohibits sexual harassment in the workplace.

Job Description About us - Long Island based Excavation and Reinforced Concrete Contractor working in NYC seeking a qualified individual with minimum of 5 years experience with a Class A Drivers License and MVR. The following qualifications will be needed - Flatbed, Lowboy, and Dump Trailer Driver. Duties and Responsibilities - Some Truck Drivers deliver the same goods to the same places daily, and others deliver a variety of goods to a variety of places. Common truck driver duties can include: • Communicating and coordinating with dispatchers, • Obeying and following applicable traffic laws, • Maintaining a detailed log of working hours in compliance with state and federal regulations, • Ensuring any mechanical issues with the vehicle are corrected before driving, • Planning routes and meeting delivery schedules, • Complying with truck driving rules and regulations, • Reporting defects, accidents and violations, • Performing daily maintenance of truck (refueling, cleaning, etc.), • Interacting with customers in a professional manner, • Performing pre- and post-trip vehicle inspection reports, • Recording cargo deliveries, • Verifying loads for accuracy Skills and Qualifications - Truck drivers require a wide variety of skills, including: • Strong knowledge of safety regulations, to be familiar with not just traffic laws but rules regarding how often they are required to rest, maximum miles driven and the like, • A clean driving record, or they can have their license suspended or revoked, • Hand-eye coordination, since they must coordinate their hands, legs and eyes to maintain a fast reaction time on the roads

Job Description Position: CDLB - Book Fair Delivery Driver Location: Deer Park, NY Pay Rate: $30.00 an hour! Scholastic Book Fairs is looking for committed drivers for deliveries and pickups of books and supplies that help children become lifelong learners. Scholastic Book Fairs Drivers return home most days and will travel in city, suburbs, and rural areas. The pickup and delivery requires the loading and unloading of company trucks at both Branch and Schools, utilizing all safety procedures during this process. Our drivers obtain their daily manifests and inspect their trucks and equipment prior to leaving the Branch. These full time positions offer medical, dental and vision benefits, Paid Time Off, a generous 50% off discount on Scholastic merchandise, 401k and the summers off. RESPONSIBILITIES • Work with supervisor to deliver and pick-up fairs in an efficient, cost effective manner., • Work closely with supervisor to ensure customer service standards are maintained., • Load and unload trucks with or without assistance of mechanical devices., • Effectively communicate routing problems to supervisor so changes can be communicated to the routing team (road construction, address changes, steps, etc)., • Deliver and pick-up product from schools, as scheduled,, in a courteous and professional manner., • Secure and transport products in order to enable customer to receive a “Damage Free” fair., • Perform a daily pre-trip and post-trip inspection of motor vehicle to which assigned. Notify supervisor of any defects or problems., • Complete and maintain accurate and legible records in a timely manner to include, but not limited to, DOT Logs, trip sheets, fuel tickets, road expenses, and other paperwork, as required., • Adhere to all Company, local, state, and federal rules/regulations inclusive of, but not limited to, DOT, OSHA, etc., • Call Regional/Branch office immediately upon the occurrence of any of the following:, • Accident or damage to person(s) or property., • Problem with a school delivery or pick-up., • Mechanical failure of equipment., • Assist in completing warehouse tasks as required by the supervisor., • Overnight routes as necessary., • Must maintain professional appearance including well-groomed hair, clean uniform, and hygienic habits., • Attend monthly driver meetings – completing all continuous training materials as required., • Complete annual Certificate of Violation Process timely, accurately and honestly., • Utilize proper techniques for lifting, packing, and handling heavy objects, climbing ladders and pushing/pulling display cases., • Maintain a clean, organized and safe work environment., • Maintain truck per company standards., • Regular attendance in accordance with schedule., • Drug and alcohol free policy compliance., • Other duties as assigned.\nCompany Description Each year Scholastic Book Fairs, in partnership with schools across the country, hosts more than 127,000 book-sale events that give more than 35 million students and their families access to thousands of affordable and educational products, helping foster a lifelong love of reading. Each year Scholastic Book Fairs, in partnership with schools across the country, hosts more than 127,000 book-sale events that give more than 35 million students and their families access to thousands of affordable and educational products, helping foster a lifelong love of reading.

Job Description Concern Housing is seeking a Weekend Cook to be responsible for food preparation and to maintain sanitation and cleanliness of the kitchen. Days/Hours: Saturday & Sunday; 9am - 5pm Duties & Responsibilities: • Ensure that all food and products are consistently prepared and served according to the recipes, portioning, cooking and serving standards., • Prepare all required paperwork, including forms, reports and schedules in an organized and timely manner., • Ensure that all equipment is kept clean and kept in excellent working condition through personal inspection and by following the agency’s maintenance policies and procedures., • Control food cost and usage by following proper requisition of products from storage areas, product storage procedures, standard recipes and waste control procedures., • Be knowledgeable of agency policies regarding personnel and report any concerns/problems to program director., • Responsible for maintaining appropriate cleaning schedules for kitchen floors, mats, walls, hoods, other equipment and food storage areas., • Check and maintain proper food holding and refrigeration temperature control points., • Ensure open communication with full time Cook when ingredients are running low or if there is any feedback from clients., • Responsible for ensuring all scheduled cleaning is completed., • Remain current with all Agency required compliance documents and trainings. Requirements: A minimum of 2-years’ experience in varied kitchen positions including food preparation, line cook, fry cook and expediter along with at least 6-months experience in a similar capacity. Must be able to communicate clearly with managers, kitchen and dining room personnel and guests, and frequently lift up to 50 lbs. Must have availability to work in a standing position for long periods of time. Concern Housing offers an Agency Sponsored Retirement Plan and Employee Sponsored 403(b) Retirement Plan for part time employees. Concern encourages employee growth, offering Educational Assistance and Scholarship Programs, Licensure Reimbursement and Possible Internship/Clinical Supervision. Referral Bonuses are also available! Salary: $20.00/hr

Job DescriptionDescription: The individual will prepare design data for electrical/electromechanical aircraft parts using reverse engineering practices and coordinate with certification and material engineers along with FAA Designated Engineering Representatives. They ensure that design features are consistent with functional performance and safety requirements for the aircraft system installation and with standard manufacturing practices. Additionally, the engineer investigates in-service equipment failures to determine root cause, develops repairs to return parts to service, and designs automated test equipment (ATE) and data acquisition systems to support repair development and part qualification. This requires close communication with the engineering and sales teams to evaluate new project feasibility. Requirements: • Draft sketches and models of parts, • Conduct dimensional and electrical inspection of sample parts, • Prepare detailed dimensional and electrical analysis reports, • Research part function, failure modes, and operating conditions, • Determine appropriate material and performance specifications based on material analyses and testing, • Develop tolerance limits based on dimensional data, manufacturing capabilities, and part function, • Prepare production drawings using industry standards, • Troubleshoot failed in-service equipment to develop repair procedures for return to service, • Design, build, and validate automated test equipment (ATE) for electrical, mechanical, hydraulic, and pneumatic aircraft components, • Develop automated test scripts and data acquisition routines to support functional testing, failure analysis, and repair validation, • Analyze and interpret test data collected via DAQ systems to support engineering decisions and certification packages, • Provide engineering support for procurement, manufacturing, receiving, and certification of parts, • Create technical documents using FAA guidelines and regulations, • Work with Designated Engineering Representatives to deliver complete certification packages to the FAA Experience and Skills • 5+ years of full-time relevant work experience (design, manufacturing, quality), • CAD/3D modeling design experience, • Familiarity with aerospace specifications and processes, • Experience and/or familiarity with circuit board design and/or reverse engineering a plus, • Experience developing, planning, and implementing automated test equipment (ATE) and test procedures for electrical, mechanical, hydraulic, and pneumatic aircraft systems, • Proficient in scripting or programming for test automation (e.g., Python, LabVIEW, VBA) a plus, • Experience with analog and digital interfaces, electronic analysis techniques, and laboratory test equipment including oscilloscopes, logic analyzers, and other related test equipment, • Hands-on experience with data acquisition (DAQ) hardware and software such as NI/LabVIEW, MCC DAQ/DASYLab, and MATLAB, • Demonstrated general knowledge of drafting standards, • Proficient with SolidWorks, AutoCAD, MS Office applications, Adobe Acrobat, • Skilled in writing technical documents, • Experience in reverse engineering is desired, • Shop time or other hands-on experience is preferred, • Experience with avionics, communications, lighting, and/or electrical aircraft systems is preferred, • Understanding and familiarity with FAA standards is preferred, • Detail oriented and highly organized Education • Bachelor's degree (or higher) in Electrical Engineering or related discipline Compensation • Salary position commensurate with experience, bonus based on company and individual performance, • We offer medical, dental, vision, life and other insurance options; 401k with 100% match on first 4%; full time workers get paid holidays, vacation & sick/personal leave accrued on hire date. About Us PG Aerotech is an equal opportunity employer. For more information go to our website at www.pgaerotech.com Compensation details: 70000-105000 Yearly Salary PI7e41cbb079bb-25405-41431921

Job DescriptionDescription: Northeast Aero is seeking skilled and motivated technicians with a hunger for knowledge and a passion for aviation repair to join our team. We currently have open positions in Pneumatic, Rotating, Fuel, Electro/Mechanical, and Hydraulics departments. Our ideal candidate is a team player with a passion for working with their hands, utilizing various tools, materials, and specialized testing equipment to test and repair aircraft components in accordance with OEM and/or customer specifications. The technician's responsibilities include testing, troubleshooting, disassembling, and assembling aircraft components. All positions require knowledge of our procedures as they pertain to processes and documentation. On-the-job training and oversight are provided by NEACO management. Requirements: Primary Responsibilities • Commitment to company values and ethics, • Test and repair aircraft components in accordance with company-provided data (manuals, drawings, procedures, etc.) and company-provided training, • Maintain a clean, clutter-free work area, • Correctly, concisely, and legibly complete all company forms and reports as required by management (both written and online), • Work with co-workers to achieve goals and objectives set by management, • Assist in basic shop upkeep and maintenance, including routine cleaning of the technician's work area and periodic shop maintenance assignments, • Communicate clearly and effectively with internal and external representatives, including management, customer representatives, FAA inspectors, and airline inspectors (training provided) Experience and Skills • 3-6 years of experience in an MRO environment, • Strong mechanical aptitude, • Expert with hand tools, • Fully proficient with general electrical soldering and/or circuit board level soldering, • Ability to follow instructions and work according to written procedures concisely and accurately, • Fluent in speaking, reading, and writing English, • Able to read and thoroughly understand technical drawings, blueprints, manuals, and instructions (a pre-employment technical skills and comprehension test may be required), • Detail-oriented, self-motivated, and highly organized, • Proficient in inspection, testing, and repair of most units in the department, • Experience using a computer, • Punctual and reliable, • Valid driver's license, • Technician candidate must own their own set of basic hand tools Education • High school diploma or GED required, • A&P license/certificate not required (but a plus) Physical Requirements • Ability to lift 50 lbs., • Constant hand manipulation of small to medium components, • Sitting or standing for long periods of time, • Frequent use of hand tools and other repair equipment, • Use of chemicals for cleaning, lubricating, and painting Compensation & Benefits • Hourly position commensurate with experience level, skill level, and/or certifications: $31-$40/hour, • We offer medical, dental, vision, life, and other insurance options, • 401(k) with 100% match on first 4%, • Full-time workers receive paid holidays, vacation, and sick/personal leave accrued on hire date Additional Information This position is safety-sensitive and requires participation in the FAA DOT Drug Abatement Program. Pre-employment and random drug/alcohol testing required. A pre-employment technical skills and comprehension test may be administered. Northeast Aero Compressor is an equal opportunity employer. On-the-job training and oversight provided by NEACO management. Compensation details: 31-40 Hourly Wage PI50915a0313eb-25405-41014491

Job DescriptionRide in the coolest equipment when you join NFI’s dedicated refrigerated fleet. Haul temperature-controlled freight on local routes across upstate NY using late-model trucks built for safety and performance. Enjoy steady miles, flexible schedules, and benefits that kick in on day one! Join NFI to take advantage of: • Average Pay Range: $1,500–$1,700 per week, • $2,500 Sign On Bonus, • Local / Home Daily routes with consistent schedules, • Dedicated refrigerated touch freight deliveries, • Health, dental, vision, & Rx benefits begin day one, • Late-model fleet with advanced technology and safety features, • Our shops maintain an estimated 60% of our trucks and trailers, • Safety, referral, and inspection bonuses Pay Range: 1500.00-1700.00 per_week, General Benefits: Employees are also eligible for a robust benefit program , which includes medical, dental, vision, and prescription drug coverage; a 401k plan; a wellness program; life insurance; paid time off, and paid parental leave, among other benefit plan options. Start Your Engine: What It Takes to Drive with NFI • Minimum 21 years of age, • Current Class A CDL from your state of residence, • Minimum 12 months of relevant tractor-trailer experience, • Acceptable references from past employers, • Meet all applicable DOT qualificationsIt’s a lifestyle, join the NFI Truck Life. Call us now: 856-470-2087. At NFI, people come first—always. For over 90 years, we’ve built our reputation as a trusted, family-owned and operated logistics company by valuing every person behind the operation and focusing on our dedicated customers. We know that professional drivers are the heart of what we do, and that’s why at NFI, you are more than just a number—you’re known by name, celebrated for your hard work, and supported every step of the way. Because relationships matter, we’ve built a culture rooted in respect and recognition. We provide the tools and support you need to succeed and grow your trucking career. Whether you're looking for a local trucking job or a regional driving route with a company that cares, NFI is where drivers thrive—because we’re not just in the freight business, we’re in the people business. NFI driver expectations and requirements: • Perform all duties safely and responsibly., • Follow all federal and/or state laws, regulations, and/or customer rules, standards, and guidelines., • Physically capable of performing all job duties, which include moving frequently, standing, walking, and sitting. The associate is frequently required to use hands to touch, handle, and feel, and to reach with hands and arms. The associate must be able to regularly lift and/or move up to 50 lbs/23 kg and occasionally lift and/or move up to 100 lbs/45 kg., • Ability to report all problems with equipment, as well as accidents, traffic violations, and damage before, during, and after the route., • Ability to legally operate a motor vehicle and safely and frequently enter/exit the vehicle as well as the rear cargo area., • Ability to perform routes, pickups & deliveries based on customer requirements.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. The Company will consider qualified applicants, including those with criminal histories, in a manner consistent with applicable state and local laws. Federal law requires employers to provide reasonable accommodation to qualified individuals with disabilities. Please tell us if you require a reasonable accommodation to apply for a job or to perform your job. NFI Operating Center: 562 #priorityadzuna

Job DescriptionMechanical Assembler Location: Hauppauge, NY Job Type: Full-Time | Temp-to-Perm Pay: $25.00–$28.00/hour, based on experience Hours: Mon-Thu 7:00am - 4:30pm Fri 7:00am - 3:30pm Build Your Career With Us! Adecco is partnering with a leading Aerospace components manufacturer in Long Island, NY. We’re looking for a skilled Mechanical Assembler to join our team in Hauppauge, NY. This is an excellent temp-to-perm opportunity for someone with manufacturing or mechanical assembly experience who enjoys hands-on work and takes pride in producing high-quality products. What You’ll Do Assemble mechanical components and subassemblies using hand and power tools. Read and interpret blueprints, assembly drawings, work orders, and instructions. Perform fitting, adjustment, testing, and inspection of parts and assemblies. Use measuring tools such as calipers, micrometers, dial indicators, and voltmeters. Work with mechanical, hydraulic, optical, and electrical/electronic components. Perform soldering, coil winding, subassembly, and final detailing as needed. Identify quality issues and ensure finished products meet specifications. Help improve production processes through Lean manufacturing initiatives. Maintain a safe, clean, and organized work area. What We’re Looking For High school diploma or equivalent. 2+ years of manufacturing or mechanical assembly experience. Ability to read and understand basic blueprints and technical drawings. Comfortable using hand tools, power tools, calipers, and other measuring equipment. Strong attention to detail and commitment to quality. Ability to work independently while following established procedures. Mechanical aptitude and willingness to learn new processes. Why Consider This Opportunity? $25–$28/hour based on experience Full-time hours Temp-to-perm potential Hands-on work with a variety of mechanical and precision components Opportunity to build your skills and grow within a manufacturing environment If you have mechanical assembly or manufacturing experience and are looking for a long-term opportunity, we want to hear from you! Pay Details: $25.00 to $28.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.adecco.com/en-us/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionFinding a Full-Time job that fits your lifestyle isn't always easy. That's where Kelly comes in. We're seeking a Equipment Operator to work at a premier client in Bohemia, New York - 11716.Pay rate and ShiftJob Duration: 12 Month Pay rate: $28.60/hours on W2Shift: 2nd Shift (3PM to 11:30PM) (Monday to Friday)Job Description:? You’ll discover meaningful work that makes a positive impact on a global scale. Join our colleagues in bringing our Mission to life every single day to enable our customers to make the world healthier, cleaner and safer. We provide our global teams with the resources needed to achieve individual career goals while helping to take science a step beyond by developing solutions for some of the world’s toughest challenges, like protecting the environment, making sure our food is safe or helping find cures for cancer. Location/Division Specific Information: Clinical Labeling Services, part of the Clinical Trials Division, located in Bohemia, New York, provides leading clinical label design, production and management services for the pharmaceutical and biotechnology industry. Our advanced inspection software, full in-house print capabilities, and proprietary translation and regulatory approval system are designed to reduce overall clinical trial label cycle times. How Will You Make an Impact?: The Equipment Operator, Digital Manufacturing has a significant impact on the overall efficiency and accuracy of the labeling process. By operating and maintaining the equipment used for digital labeling, the operator ensures that labels are produced in a timely manner and meet required quality standards. A Day in the Life: Responsible for setting up all computerized digital equipment for print production runs using proprietary software applications according to Standard Operating Procedures (SOPs) and Work Instructions (WIs). Monitors and troubleshoots operations during the run and processes rejects according to WIs. Ensures that the equipment and materials are operated and maintained at the highest standards, following SOPs including post-production equipment cleaning, keeping the equipment room organized, and maintaining the manufacturing warehouse in a clean and organized manner. Inspects printed material during production and corrects any printing mistakes to ensure the printed sheets align with job order and customer profile specifications, as well as quality and construction specifications and cGMP standards. Understands and follows all SOPs and WIs that relate to equipment operations and applies current Good Manufacturing Practices (cGMPs) in all areas of responsibility. Education: High school diploma or equivalent required. Experience: Minimum of 2 years of work experience in a manufacturing, operations, production, lab setting or related field Preferred: Experience in a cGMP environment Knowledge, Skills, Abilities: Knowledge and experience in the printing industry and proficiency in computer operations, including data transfer and file management. Mechanically inclined with the ability to accurately read measurements, troubleshoot issues and identify potential solutions associated with a variety of constructions. Skills in handling and mounting flexible tooling, performing roll splicing using automated equipment, and operating computerized digital equipment are also important. Detail-oriented and the ability to work in an organized manner. Must be capable of handling confidential information and communicating in a professional manner with internal customers. Physical Requirements / Work Environment: Fast-paced environment which relies on teamwork to ensure jobs are completed within established timelines. Ability to lift and maneuver materials weighing up to 70 lbs. What happens next:Once you apply, you'll proceed to next steps if your skills and experience look like a good fit. But don't worry-even if this position doesn't workout, you're still in our network. That means all of our recruiters will have access to your profile, expanding your opportunities even more.Helping you discover what's next in your career is what we're all about, so let's get to work.Apply to be an Equipment Operator today! #P3#CB As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Please note: The following benefits reflect Kelly's general offerings. Eligibility may vary by assignment, location, and job type. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Get a complete career fit with Kelly®. You’re looking to keep your career moving onward and upward, and we’re here to help you do just that. Our staffing experts connect you with top companies for opportunities where you can learn, grow, and thrive. Jobs that fit your skills and experience, and most importantly, fit right on your path of where you want to go in your career. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

Job Description METAL SAW OPERATORS - 3rd Shift Pennsylvania Steel Company (Long Island), Hauppauge, NY Monday - Friday 12:00am - 8:30 am Full Time / Permanent Opportunity Pennsylvania Steel Company is a leading distributor of steel and aluminum. We are a private and veteran owned business. Pennsylvania Steel has been in business since 1972 and has expanded to 11 locations in 2017, becoming one of the largest Steel Service Centers in the eastern United States. The Hauppauge, NY branch is looking for 3rd Shift Saw Operators. If you are a dependable and personable individual who is looking for a rewarding career with an established company, we want to hear from you! Job description • Operating automatic cold saw and band saw, • Read job specifications to determine machine adjustments and material requirements., • Ability to work with quality inspection tools including micrometers and calipers and perform basic dimensional tolerances., • Monitor machine operation for continued accuracy throughout cutting processes, • Prioritize workload to meet customer requirements and company performance goals Salary: $20.00/hr. to start, plus full benefits and Shift Differential Qualifications: • Ability to read micrometers and tape measures, • Forklift exp., • Must be able to lift 50lbs., • Ability to perform basic math calculations, • Ability to work independently with minimal supervision, • Detail oriented and able to multi-task, • Familiar with basic computer systems

Job Description METAL SAW OPERATORS - 3rd Shift Pennsylvania Steel Company (Long Island), Hauppauge, NY Monday - Friday 12:00am - 8:30 am Full Time / Permanent Opportunity Pennsylvania Steel Company is a leading distributor of steel and aluminum. We are a private and veteran owned business. Pennsylvania Steel has been in business since 1972 and has expanded to 11 locations in 2017, becoming one of the largest Steel Service Centers in the eastern United States. The Hauppauge, NY branch is looking for 3rd Shift Saw Operators. If you are a dependable and personable individual who is looking for a rewarding career with an established company, we want to hear from you! Job description • Operating automatic cold saw and band saw, • Read job specifications to determine machine adjustments and material requirements., • Ability to work with quality inspection tools including micrometers and calipers and perform basic dimensional tolerances., • Monitor machine operation for continued accuracy throughout cutting processes, • Prioritize workload to meet customer requirements and company performance goals Salary: $20.00/hr. to start, plus full benefits and Shift Differential Qualifications: • Ability to read micrometers and tape measures, • Forklift exp., • Must be able to lift 50lbs., • Ability to perform basic math calculations, • Ability to work independently with minimal supervision, • Detail oriented and able to multi-task, • Familiar with basic computer systems

Job Description SAW OPERATORS - 3rd Shift Pennsylvania Steel Company (Long Island), Hauppauge, NY Monday - Friday 12:00am - 8:30 am Full Time / Permanent Opportunity Pennsylvania Steel Company is a leading distributor of steel and aluminum. We are a private and veteran owned business. Pennsylvania Steel has been in business since 1972 and has expanded to 11 locations in 2017, becoming one of the largest Steel Service Centers in the eastern United States. The Hauppauge, NY branch is looking for 3rd Shift Saw Operators. If you are a dependable and personable individual who is looking for a rewarding career with an established company, we want to hear from you! Job description • Operating automatic cold saw and band saw, • Read job specifications to determine machine adjustments and material requirements., • Ability to work with quality inspection tools including micrometers and calipers and perform basic dimensional tolerances., • Monitor machine operation for continued accuracy throughout cutting processes, • Prioritize workload to meet customer requirements and company performance goals Salary: $20.00/hr. to start, plus full benefits plus Shift Differential Qualifications: • Ability to read micrometers and tape measures, • Forklift exp., • Must be able to lift 50lbs., • Ability to perform basic math calculations, • Ability to work independently with minimal supervision, • Detail oriented and able to multi-task, • Familiar with basic computer systems Benefits: Benefits: • 401(k), • Dental insurance, • Health & Vision insurance, • Life insurance, • Paid time off, • Paid holidays Position available: Immediately Job Type: Full-time Pennsylvania Steel is a Equal Opportunity Employer and Drug Free Workplace

Job DescriptionBring Precision to Packaging at Oliver Inc. Imagine starting your afternoon on a spotless production floor, dialing in a Bobst folding–gluer, and watching perfectly formed cartons stream off the line. That’s a typical day here. With more than 250 years of combined expertise, multiple production sites, and a commitment to sustainable, state-of-the-art technology, Oliver Inc. pairs craftsmanship with speed, consistency, and nimbleness. We’re growing our Finishing team and seeking a seasoned professional who takes pride in building quality through every fold and bead of glue. What You’ll Do You’ll independently set up, adjust, and operate folding–gluer equipment to meet exact specifications, balancing output, accuracy, and safety through the run. Your day may include: • Configuring feeder, glue systems, plow and fold plates, compression sections, the pack station, and in-line quality inspection devices., • Tuning equipment for proper folding sequence, glue application, paperboard caliper, scoring alignment, and carton integrity., • Setting up and running automated, computer-controlled inspection systems to assure quality., • Monitoring output continuously and making precise adjustments to maintain consistency., • Performing routine preventive maintenance and handling minor repairs., • Reading job tickets and layouts, confirming schedules, and maintaining accurate inventory counts., • Completing end-of-run cleanup and keeping the area organized and safe., • Following all safety procedures and contributing ideas to continuous improvement. What Makes You a Great Fit, • Previous experience operating folding–gluer equipment in printing, packaging, or folding-carton manufacturing (preferred)., • Hands-on background with Bobst or similar machines (highly preferred)., • Strong mechanical aptitude and troubleshooting skills for both process and quality issues., • Knowledge of glue systems, scoring, folding sequences, and carton construction., • Ability to interpret job tickets and production layouts; comfortable using calipers, rulers, and gauges., • Solid math competency, including measurements and unit conversions., • Exceptional attention to detail; collaborative communicator., • Thrives in a fast-paced manufacturing setting., • High school diploma or equivalent. Why You’ll Love Working Here, • $1,000 sign-on bonus for experienced operators., • Relocation bonus available., • Competitive pay and a comprehensive benefits package., • People-centered culture focused on growth, teamwork, and continuous improvement., • Modern equipment in a clean, safe environment. Shift: 2nd Shift Locations: Cleveland, OH & Long Island, NY Ready to Build Something Great? If you’re passionate about precision and want long-term stability with a supportive, family-oriented team, we’d love to hear from you. Oliver Inc is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, national origin, religion, gender, gender identity and expression, sex, sexual orientation, disability, age, citizenship status, veteran status or any other characteristic protected by applicable federal, state or local laws.

Job DescriptionOliver Inc. is hiring! Our growing Company is looking for enthusiastic talents to partner with our customers for all their printing and packaging needs!With more than 250 years of experience, multiple production facilities, and investment in state-of-the-art technology with an emphasis on sustainability, Oliver Inc. offers speed, consistency and nimbleness as a one-stop solution for all of your printing & packaging needs. At Oliver Inc, our core values are part of the framework of our organization. We're passionate and enjoy our work! We value respect and focus on servicing our customers' needs by providing them with creative solutions that help build their brands. When you partner with Oliver, you partner with success.Position OverviewOliver Inc. is looking for an experienced Folding Gluer Operator/Adjuster. This position is responsible for independently setting up and operating folding gluer equipment to manufacture products that meet exact specifications. You will ensure efficiency, accuracy, and quality throughout production runs while maintaining safety and supporting overall departmental goals.SHIFT - 2nd (3 - 11:30pm)About the Role:In this opportunity as a Folding Gluing Operator/Adjuster, you will:Set up and operate folding gluer equipment, including feeders, glue systems, folding sections, compression units, and pack stationsAdjust machine settings to ensure proper folding sequence, glue application, scoring, and alignmentRun and monitor automated inspection systems to maintain quality standardsContinuously inspect product during production and make adjustments as neededInterpret job tickets, production schedules, and specificationsMaintain accurate inventory counts and verify job materialsPerform routine preventative maintenance and minor troubleshooting on equipmentComplete post-production cleanup and maintain a safe, organized work areaFollow all safety procedures and contribute to continuous improvement initiatives About You:You're a fit for the role of Folding Gluing Operator/Adjuster if your background includes:Prior experience as a Folding Gluer Operator in printing, packaging, or folding carton manufacturing (preferred)Hands-on experience with Bobst, Heidelberg or similar folding gluer equipment (strongly preferred)Solid mechanical aptitude with the ability to troubleshoot equipment and quality issuesUnderstanding of glue systems, folding sequences, scoring, and carton constructionAbility to read job tickets and use measurement tools (calipers, rulers, gauges)Strong math skills, including basic measurements and conversionsHigh attention to detail and a commitment to quality workmanshipAbility to work effectively in a fast-paced manufacturing environmentStrong communication and teamwork skillsHigh school diploma or equivalentWhy Choose Us?Competitive Pay + Overtime OpportunitiesFull Benefits: Medical, Dental, Vision401(k) with Company MatchPaid Time Off & HolidaysStable, Growing Company with long-term career opportunitiesModern Equipment & Clean FacilitySupportive, Team-Oriented CultureOliver Inc is an Equal Opportunity Employer.All qualified applicants will receive consideration for employment without regard to race, color, national origin, religion, gender, gender identity and expression, sex, sexual orientation, disability, age, citizenship status, veteran status or any other characteristic protected by applicable federal, state or local laws. Job Posted by ApplicantPro

Job Description WHO WE ARE Dejana Truck & Utility Equipment is a division of Douglas Dynamics, North America’s premier manufacturer and up-fitter of work truck attachments and equipment. Our belief is that our employees and culture are just as important to the company as serving our customers. We place a high value on building a team and working environment where individuals can succeed professionally and personally. As a team member at Douglas Dynamics, you can expect to make a difference through your work, to have a direct impact on the achievement of a very meaningful mission to serve our customers, to advance your career, and to have room for fun and fulfillment in your daily life. Our focus on integrity, teamwork, and high performance creates an ideal work environment for every one of our employees. We offer competitive salaries, benefits, and opportunities for personal and professional growth. Discover our opportunities and come see all the ways you can do more at Douglas Dynamics. We would love to have you join our team, where we offer top notch benefits, multiple avenues for advancement and a great working environment. HOW YOU WILL CONTRIBUTE As Fleet Project Coordinator, you will assist the Fleet Account Manager in managing the bidding of new utility vehicle upfitting projects and the full project production timeline from award to final delivery. In conjunction with the Fleet Account Manager, you will act as second point of contact coordinating projects with Fleet Customers, Dealers and Shop Production. Assisting with Fleet Customer Specification review and adherence, Coordination between sales and production teams, managing fleet inventory with production teams, and assisting and ensuring in build compliance with technical specification throughout lifecycle of production. In this position you will obtain on-the-job training and guidance throughout the process of fleet utility production. You will gain experience in Fleet Utility Vehicle Production Management, Bid Specification Review and Estimation of Light/Medium/Heavy-Duty Vehicle Equipment Applications. Essential Duties and Responsibilities: • Assist the Fleet Account Manager and Outside Fleet Sales Representatives in managing fleet upfit projects from bid award through final delivery and customer acceptance., • Review customer specifications, purchase orders, and project requirements to ensure compliance throughout the production lifecycle., • Participate in customer, dealer, and internal project meetings to document requirements, action items, and project milestones., • Coordinate communication between Sales, Engineering, Estimating, Purchasing, Production, and Quality teams to support successful project execution., • Monitor project schedules, including chassis arrivals, equipment procurement, production timelines, and delivery commitments to ensure customer deadlines are met., • Maintain project records, specifications, change orders, inspection reports, and customer documentation throughout the project lifecycle., • Assist in the preparation of customer quotations, bid submissions, pricing updates, and approved change order requests., • Work with vendors, estimating, and purchasing teams to obtain equipment pricing, confirm availability, and monitor lead times., • Track and communicate project status, potential delays, material shortages, and specification issues, escalating concerns when appropriate., • Support production teams by providing clarification on customer specifications, equipment requirements, and approved project changes., • Assist with pre-production reviews, in-process inspections, final quality inspections, and customer acceptance activities., • Ensure all delivery documentation, warranty information, inspection records, and customer-required materials are complete and accurate prior to vehicle delivery., • Serve as a secondary point of contact for fleet customers and dealers regarding project status, specifications, documentation, and delivery updates., • Maintain accurate project tracking within applicable business systems and reporting tools., • Stay current on industry trends, vehicle applications, product offerings, and supplier capabilities to support customer solutions and project execution., • Travel as needed to customer locations, dealer meetings, production facilities, and project review meetings. The above list reflects the general details necessary to describe the principal and essential functions of the position and shall not be construed as the only duties that may be assigned. WHAT WE OFFER YOU • Compensation: $23.74 – $36.68 per hour., • (equivalent to approximately $49,379.00 – $76,290.00 annually based on a 40-hour workweek)., • This position is classified as nonexempt and is eligible for overtime pay in accordance with applicable law., • Actual compensation will be based on a variety of factors, including experience and qualifications., • A fulfilling career with the ability to contribute to an Industry leader., • A comprehensive suite of benefits., • A generous 401k match., • Profit sharing for all full-time employees., • Dejana Truck and Utility Equipment is a proud sponsor of GEDWorks, a company sponsored program to help any employee (or their family member) earn their GED as they work for us. WHAT THIS ROLE NEEDS • Customer-focused, responsive, and professional when communicating with fleet customers, dealers, vendors, sales representatives, and internal teams., • Highly organized and detail-oriented, with the ability to track multiple projects, deadlines, specifications, quote details, production milestones, and delivery requirements., • Proactive in identifying open items, potential delays, specification questions, pricing gaps, or communication needs and escalating them appropriately., • Self-motivated and accountable, with a strong sense of ownership and follow-through from project award through final delivery., • Collaborative and team-oriented, working effectively with Sales, Estimating, Purchasing, Engineering, Production, Quality, and outside vendors to support successful project execution., • Able to work in a fast-paced environment while balancing competing priorities, customer expectations, and internal deadlines., • Strong written and verbal communication skills, with the ability to document decisions, summarize project status, and communicate clearly with both technical and non-technical audiences., • Demonstrates curiosity and willingness to learn about fleet vehicle upfitting, utility equipment, production processes, vendor products, and customer applications. Education: • Minimum of High School Graduation or Equivalent, • Bachelor’s degree, preferred. Experience and Training: • Administrative, customer service and communication skills., • Proficiency in Microsoft Suit., • Familiarity with Work Truck Equipment and Automotive., • Experience project price estimating., • Experience with Fleet and Fleet Management., • Experience with Heavy Duty Utility Vehicle Upfitting in a shop environment. WORK ENVIRONMENT • This is a full-time, on-site position requiring regular interaction with production personnel on the shop floor. Remote and hybrid work are not available., • Exposure to moving equipment, fumes, loud noise, and fluctuating temperatures while on the shop floor. Employment Requirements Dejana Truck and Utility Equipment uses E-Verify for I-9 processing and all candidates must be eligible to work in the US. All positions require background checks and driver positions also require mvr/drug/alcohol testing before and/or during employment. If you agree and you wish to apply for a position, please continue with your submission. Thank you for your interest. Equal Opportunity Employer As an Equal Opportunity Employer, Douglas Dynamics, LLC does not discriminate against qualified applicants in hiring based on race, color, sex, age, sexual orientation, gender identity, national origin, disability, or any other characteristic protected by law.

Position Description: Fresh Produce Quality & Inventory Control Job Description DiCarlo Food Service Hours: Sunday - Thursday 9:00 AM - 5:00 PMPay rate: $20-$30/hr. Depending on experience Who We AreDiCarlo is a family-owned and operated foodservice distributor with a strong legacy of reliability and customer focus. Since 1963, we have provided the finest quality products to independent and multi-unit restaurants across the Northeast. Job Description for the Fresh Produce Quality & Inventory Control PositionThe Fresh Produce Quality & Inventory Control Associate inspects inbound, stored, and outbound fresh produce while maintaining accurate inventory records. The role ensures products meet company, customer, and applicable regulatory standards for quality, condition, temperature, size, maturity, packaging, food safety, quantity, lot traceability, and shelf life. This position works closely with Purchasing, Operations, and Sales to prevent quality issues, reduce shrink, improve inventory accuracy, and ensure customers receive consistent, high-quality produce. Essential Duties for the Fresh Produce Quality & Inventory Control Position • Inspect inbound fresh produce shipments for quality, condition, temperature, count, size, color, maturity, firmness, defects, decay, damage, and conformity with purchase specifications., • Accept, place on hold, or recommend rejection of product based on established quality standards and promptly communicate findings to Purchasing and Operations., • Perform daily warehouse and cooler inspections to monitor product condition, proper rotation, storage temperature, sanitation, and remaining shelf life., • Conduct outbound quality checks and random shipping audits to verify that produce selected for customers meets company and customer requirements., • Document inspection results accurately, including temperatures, defects, disposition decisions, corrective actions, and photographs when appropriate., • Identify recurring quality issues and collaborate with suppliers, growers, Purchasing, and warehouse teams to resolve problems and improve product consistency., • Support inventory rotation and disposition decisions by recommending priority use, rework, salvage, donation, or disposal when appropriate., • Maintain accurate fresh produce inventory by performing routine physical inventories., • Investigate inventory discrepancies, shorts, overages, substitutions, mis-picks, and location errors; document root causes and coordinate corrections with warehouse leadership., • Monitor aging inventory, shelf life, product movement, and stock levels; communicate slow-moving, excess, short-dated, or at-risk items to Purchasing, Sales, and Operations., • Ensure produce is properly received, labeled, slotted, rotated, and issued using first-in, first-out and first-expired, first-out practices., • Review daily receiving, transfer, picking, shipping, adjustment, and return transactions to confirm inventory movements are recorded accurately in the warehouse management system., • Track and report produce shrink, spoilage, damage, aging, inventory variances, and other key performance measures; recommend corrective actions to reduce product loss., • Follow all company food safety, sanitation, Good Manufacturing Practices, workplace safety, and cold-chain procedures; assist with product recalls and regulatory or third-party inspections as needed. Qualifications for the Fresh Produce Quality & Inventory Control Position • Knowledge of fresh produce varieties, seasonality, common defects, quality grades, ripening, handling, and storage requirements., • Strong attention to detail, sound judgment, and the ability to make timely product disposition decisions., • Effective verbal and written communication skills, with the ability to work professionally with suppliers, customers, and internal departments., • Ability to work in refrigerated warehouse environments, stand and walk for extended periods, bend and reach, and safely lift and handle produce cases in accordance with company requirements., • Basic proficiency with Microsoft Outlook, Word, and Excel; experience entering inspection results into a quality or warehouse system is preferred., • Experience with produce inventory control, cycle counting, lot tracking, FIFO/FEFO rotation, and warehouse management or inventory systems is preferred.Benefits:Medical, Dental, Vision, Life Insurance, Health Savings Account, 401(k), and more. DiCarlo Distributors, Inc.1630 North Ocean AvenueHoltsville, NY 11742 DiCarlo Distributors, Inc. is an Equal Opportunity Employer. We consider applicants for employment without regard to race, color, religion, sex, national origin, age, disability, genetic information, veteran status, or any other characteristic protected by applicable federal, state, or local law. Compensation details: 20-30 Hourly Wage PIe7a2fd5f13e7-37820-41559365

Pay Range: $25.00-$30.00 What is the value of a WM job? At WM we know that the value of a WM job is more than a paycheck. It's a way to create opportunities for you and your family. This is why we are constantly working to make WM a great place to work and grow a career. We Are Always Working For A Sustainable Tomorrow®: Our mission is to leave the world a better place than we found it by helping its inhabitants find purpose in becoming its caretakers. We Are People First: The members of the WM family are the foundation for our success. We foster an environment where all teammates feel welcomed, valued and seen. We Are Committed to Your Growth: Your Tomorrow Education Assistance Program, paid on-the-job training, and established career progression. We Are Stable: From the front line to the corporate offices, our team members perform essential and meaningful work. We Are a Family: At WM we are over 60,000 people - from many places and many backgrounds, and it is our amazing differences that make us stronger. Ready to roll with us? Click Apply to join the WM team today. Job Summary: Drivers operate heavy-duty trucks with front, side, or rear-end load lift attachments dependent on the line of business they're operating in and the type of truck they're operating. Drivers will transport the material to a disposal, transfer or recycle facility when trucks reach legal load capacity. Commercial Drivers are responsible for providing the pick-up service of containers filled with waste or recyclable material. Containers may weigh in excess of 1,000 pounds and at times require drivers to maneuver wheeled containers to a pick-up stage area. Commercial Drivers navigate high-traffic and congested roadways, driveways, alleyways, and lots. Highly skilled backing maneuvers are essential to successfully perform this job. Residential Drivers are responsible for the collection of residential household waste or recyclable material and must safely maneuver vehicles in residential environments. Residential Drivers navigate high-traffic and congested roadways, driveways, alleyways, and lots. Roll-off Drivers are responsible for preparing, loading, and transporting large mobile open-top and compactor containers from customer locations. Roll-off Drivers will navigate driveways, alleyways, lots, and high-traffic roadways and may operate in tight overhead environments while on industrial routes. Highly skilled backing maneuvers are essential, to successfully perform this job. Essential Duties and Responsibilities: • Operates vehicle in accordance with Waste Management Safety and Life Critical Rules, OSHA (Occupational and Safety Health Act) and DOT (Department of Transportation) requirements as well as all local, state and federal laws., • Performs pre and post-trip inspections of assigned vehicle and documents checks utilizing the standard DVIR (Driver Vehicle Inspection Report)., • Immediately reports all unsafe situations or service-related issues to Operations Manager or Dispatch., • Attends and participates in all scheduled training programs, briefings, and meetings as required by WM or directed by the Route Manager., • Works closely with Operations Manager to improve route efficiencies and identify best practices., • Notifies Operations Manager of any incidents, accidents, injuries, or property damage., • Notifies Operations Manager or Dispatch of service interruptions including closed or impassable streets or alleyways, receptacles too heavy to service or potential safety hazards., • Communicates customer requests to Operations Manager or Dispatch., • Completely dumps all receptacles and leaves the customer's location clean and free of debris., • Follows route assignments as directed and completes end-of-day documentation and check-out process., • Performs all duties as scheduled by Operations Manager or Dispatch and assists other drivers as directed to meet customer needs. Qualifications: A. Required Qualifications: • 1 year operating a vehicle requiring a CDL or, • 1 year equivalent military driving within the last 7 years and, • Must be at least 18 years of age and legally eligible to work in the country where the position is located and, • Able to read, write, and speak English well enough to interact with the public, understand traffic signs, respond to official questions, and complete records or reports and, • Successfully complete pre-employment screening, including drug screen and physical, • Commercial Driver License (CDL) Class A with an air-brake endorsement or, • Commercial Driver License (CDL) Class B with an air-brake endorsement B. Preferred Qualifications: • High School Diploma or GED (accredited) Physical Requirements: • Standing, • Walking, • Lifting, • Pushing, • Pulling, • Crouching, • Reaching, • Handling, • Sitting, • Talking, • Hearing This role is designated as safety sensitive and will require the successful candidate to strictly comply with all safety rules and protocols. As part of the ongoing employment requirements, the successful candidate may be subject to drug and alcohol testing—including pre‑employment screening, post‑incident evaluations, reasonable suspicion checks, and random testing—in accordance with government regulations and company policies. Pay: The expected base pay range for this on-site position is $25.00 - $30.00. This range represents a good faith estimate for this position. The specific salary offered to a successful candidate may be influenced by a variety of factors including the candidate's relevant experience, education, training, certifications, qualifications, and work location. Benefits: At WM, each eligible employee receives a competitive total compensation package that includes medical, dental, vision, life insurance, and short-term disability. In addition, we offer a stock purchase plan, company matching on a 401(k), and more. Employees also receive paid vacation, holidays, and personal days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply.

Pay Range: $28.00 BOE What is the value of a WM Job? At WM we know that the value of a WM job is more than a paycheck. It's a way to create opportunities for you and your family. This is why we are constantly working to make WM a great place to work and grow a career. We Are Always Working For A Sustainable Tomorrow®: Our mission is to leave the world a better place than we found it by helping its inhabitants find purpose in becoming its caretakers. We Are People First: The members of the WM family are the foundation for our success. We foster an environment where all teammates feel welcomed, valued and seen. We Are Committed to Your Growth : Your Tomorrow Education Assistance Program, paid on-the-job training, and established career progression. We Are Stable: From the front line to the corporate offices, our team members perform essential and meaningful work. We Are a Family: At WM we are over 60,000 people - from many places and many backgrounds, and it is our amazing differences that make us stronger. Ready to roll with us? Click Apply to join the WM team today. I. Job Summary Safely operates a tractor-trailer or a straight truck with a pup trailer (or other vehicle requiring a Class A CDL) to perform assigned duties on designated routes. II. Essential Duties and Responsibilities + Operates vehicle in accordance with Occupational and Safety Health Act (OSHA) and Department of Transportation (DOT) requirements as well as all local, state and federal requirements and Company expectations for the Fleet; maintains a clean and safe vehicle. + Performs pre- and post-trip inspections of assigned vehicle using standard eDVIR (electronic Driver Vehicle Inspection Report); notes all issues on eDVIR form for corrective review/repair. + Immediately reports any unsafe situations or unscheduled service calls to Operations Manager and Dispatch before attempting service. + Participates and cooperates in all scheduled training, briefings, and meetings as required by Operations Manager. + Works closely with Operations Managers and Dispatch to improve route efficiencies and identify problem or unsafe accounts. + Performs all duties as scheduled by Operations Manager and Dispatch, assisting other company drivers as directed. + Notifies Operations Manager of any incidents, accidents, injures, or property damage. + Notifies Operations Manager and Dispatch of issues as prescribed by Service Machine protocol, including blocked containers, services that cannot be completed, or problems that arise on the route. + Communicates customer requests, issues, or service changes to Operations Manager and Dispatch. + Completely dumps all containers and leaves the customer's location clean and free of debris. + Positions containers on the customer's property in a manner that ensures containers do not block driveway entrances or traffic. + Follows route assignments throughout the day and completes all documentation when checking-in at the end of the route. III. Qualifications A. Required Qualifications + 1 year operating a vehicle requiring a CDL or + 1 year equivalent military driving within the last 7 years and + Able to read, write, and speak English well enough to interact with the public, understand traffic signs, respond to official questions, and complete records or reports. + Must be at least 18 years of age and legally eligible to work in the country where the position is located and + Successfully complete pre-employment screening, including drug screen and physical + (CDL)-Class A B. Preferred Qualifications + High School Diploma or G.E.D (accredited) IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. + Standing + Walking + Lifting + Pushing + Pulling + Crouching + Reaching + Handling + Sitting + Talking + Hearing Field: This job operates in both inside garage, shop or gas plant conditions as well as in outside conditions that include inclement weather, heat and humidity. This role is designated as safety sensitive and will require the successful candidate to strictly comply with all safety rules and protocols. As part of the ongoing employment requirements, the successful candidate may be subject to drug and alcohol testing-including pre‑employment screening, post‑incident evaluations, reasonable suspicion checks, and random testing-in accordance with government regulations and company policies. Pay: The expected base pay range for this position across the U.S is $28.00 BOE. This range represents a good faith estimate for this position. The specific salary offered to a successful candidate may be influenced by a variety of factors including the candidate's relevant experience, education, training, certifications, qualifications, and work location. V. Benefits At WM, each eligible employee receives a competitive total compensation package that includes medical, dental, vision, life insurance, and short-term disability. In addition, we offer a stock purchase plan, company matching on a 401(k), and more. Employees also receive paid vacation, holidays, and personal days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply. Equal Opportunity Employer: Minority/Female/Disability/Veteran

Starting wage is based on a number of factors including, but not limited to, the position being offered, location, education, training, and/or experience. The Delivery Truck Driver is responsible for the safe operation of the company's truck with a typical weight capacity of 30-55,000 pounds (GVW). This role is responsible for all functions related to the vehicle, including the pre-trip report (DVIR), ensuring the truck is loaded properly, the material is secured to the truck, delivery of materials to the customer location, and processing of all customer delivery paperwork. • Safely operate a heavy-load truck., • Ensure all material is properly secured at the beginning of the shift and continuously monitor after each delivery., • Ensure that all customer supporting paperwork is completed and returned at the end of each shift., • Collect, document, and properly secure money received to ensure alignment with customer paperwork., • Report any issues or incidents related to material damage or customer matters to dispatch., • Perform the daily truck inspection, pre- and post-trip (DVIR)., • Seek advice and guidance on non-routine or problem areas from supervisor., • Perform and document inspections to ensure truck and equipment are kept in good condition., • High School Diploma or GED required., • Minimum of 2 years of truck driving experience with a proven track record of safe driving., • Possession of a CDL (type A or B) Commercial driver's license., • Proficient in driving manual transmission trucks., • Capability to operate a gate lift., • Proficiency in operating an electric pallet jack., • Experience in handling commercial and residential deliveries., • Ability to service all region's distribution centers., • Excellent communication and interpersonal skills., • Travel is required for this position., • Successful completion of a pre-employment drug test and background check is mandatory., • Knowledge of DOT rules and regulations, • Minimum of 5 years of truck driving experience with a proven track record of safe driving. Medical Dental Vision Employer Paid Basic Employee Life and AD&D Insurance Employer Paid Long Term Disability Flexible Spending Accounts Voluntary Short-Term Disability Voluntary Life and AD&D Insurance Voluntary Accident Insurance Voluntary Critical Illness Insurance At Construction Resources, our people are the driving force behind everything we do. Construction Resources is an equal opportunity employer that aspires to be the best in the business by building an associate experience that celebrates growth, development, and purpose. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to speak or hear. The employee is frequently required to sit for extended periods of time, stand, walk, climb stairs, use hands to finger, handle or feel, and reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. This is a full-time position that requires overtime as business needs dictate. This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time, with or without notice. We value your privacy and want to ensure transparency regarding the collection and processing of your personal data. As part of our recruitment process, we require your explicit consent to collect, store, and process your personal information, including but not limited to your resume, contact details, professional experience, and other relevant data. This data will be used solely for recruitment and hiring purposes in accordance with our privacy policy and applicable data protection regulations. Your information will be stored securely and will not be shared with third parties without your consent. By submitting your application, you agree to the collection and processing of your personal data for the purposes stated above. You may withdraw your consent at any time by contacting us at recruitment@crhomeusa.com.

Pay Range: $28.00 BOE What is the value of a WM job? At WM we know that the value of a WM job is more than a paycheck. It's a way to create opportunities for you and your family. This is why we are constantly working to make WM a great place to work and grow a career. We Are Always Working For A Sustainable Tomorrow®: Our mission is to leave the world a better place than we found it by helping its inhabitants find purpose in becoming its caretakers. We Are People First: The members of the WM family are the foundation for our success. We foster an environment where all teammates feel welcomed, valued and seen. We Are Committed to Your Growth: Your Tomorrow Education Assistance Program, paid on-the-job training, and established career progression. We Are Stable: From the front line to the corporate offices, our team members perform essential and meaningful work. We Are a Family: At WM we are over 60,000 people - from many places and many backgrounds, and it is our amazing differences that make us stronger. Ready to roll with us? Click Apply to join the WM team today. I. Job Summary Safely operates a tractor-trailer or a straight truck with a pup trailer (or other vehicle requiring a Class A CDL) to perform assigned duties on designated routes. II. Essential Duties and Responsibilities • Operates vehicle in accordance with Occupational and Safety Health Act (OSHA) and Department of Transportation (DOT) requirements as well as all local, state and federal requirements and Company expectations for the Fleet; maintains a clean and safe vehicle., • Performs pre- and post-trip inspections of assigned vehicle using standard eDVIR (electronic Driver Vehicle Inspection Report); notes all issues on eDVIR form for corrective review/repair., • Immediately reports any unsafe situations or unscheduled service calls to Operations Manager and Dispatch before attempting service., • Participates and cooperates in all scheduled training, briefings, and meetings as required by Operations Manager., • Works closely with Operations Managers and Dispatch to improve route efficiencies and identify problem or unsafe accounts., • Performs all duties as scheduled by Operations Manager and Dispatch, assisting other company drivers as directed., • Notifies Operations Manager of any incidents, accidents, injures, or property damage., • Notifies Operations Manager and Dispatch of issues as prescribed by Service Machine protocol, including blocked containers, services that cannot be completed, or problems that arise on the route., • Communicates customer requests, issues, or service changes to Operations Manager and Dispatch., • Completely dumps all containers and leaves the customer's location clean and free of debris., • Positions containers on the customer's property in a manner that ensures containers do not block driveway entrances or traffic., • Follows route assignments throughout the day and completes all documentation when checking-in at the end of the route. III. Qualifications A. Required Qualifications • 1 year operating a vehicle requiring a CDL or, • 1 year equivalent military driving within the last 7 years and, • Able to read, write, and speak English well enough to interact with the public, understand traffic signs, respond to official questions, and complete records or reports., • Must be at least 18 years of age and legally eligible to work in the country where the position is located and, • Successfully complete pre-employment screening, including drug screen and physical, • (CDL)-Class A B. Preferred Qualifications • High School Diploma or G.E.D (accredited) IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. • Standing, • Walking, • Lifting, • Pushing, • Pulling, • Crouching, • Reaching, • Handling, • Sitting, • Talking, • Hearing Field: This job operates in both inside garage, shop or gas plant conditions as well as in outside conditions that include inclement weather, heat and humidity. This role is designated as safety sensitive and will require the successful candidate to strictly comply with all safety rules and protocols. As part of the ongoing employment requirements, the successful candidate may be subject to drug and alcohol testing—including pre‑employment screening, post‑incident evaluations, reasonable suspicion checks, and random testing—in accordance with government regulations and company policies. V. Benefits At WM, each eligible employee receives a competitive total compensation package that includes medical, dental, vision, life insurance, and short-term disability. In addition, we offer a stock purchase plan, company matching on a 401(k), and more. Employees also receive paid vacation, holidays, and personal days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply. WM (WM.com) is North America's leading provider of comprehensive environmental solutions. Previously known as Waste Management and based in Houston, Texas, WM is driven by commitments to put people first and achieve success with integrity. The company, through its subsidiaries, provides collection, recycling and disposal services to millions of residential, commercial, industrial, medical and municipal customers throughout the U.S. and Canada. With innovative infrastructure and capabilities in recycling, organics and renewable energy, WM provides environmental solutions to and collaborates with its customers in helping them pursue their sustainability goals. WM has the largest disposal network and collection fleet in North America, is the largest recycler of post‑consumer materials and is a leader in beneficial use of landfill gas, with a growing network of renewable natural gas plants and the most landfill gas‑to‑electricity plants in North America. WM's fleet includes more than 12,000 natural gas trucks – the largest heavy‑duty natural gas truck fleet in the industry in North America. Healthcare Solutions provides collection and disposal services of regulated medical waste, as well as secure information destruction services, in the U.S., Canada and Western Europe. To learn more about WM and the company's sustainability progress and solutions, visit Sustainability.WM.com. Equal Employment Opportunity For United States: WM is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law. For Canada: WM is committed to the principle of equal employment for all applicants and employees, without discrimination on the basis of all grounds protected by applicable human rights legislation. Accommodations are available on request for candidates taking part in all aspects of the selection process. Please notify us if you require accommodation. Real ID In order to travel by air or access federal property, federal law requires individuals have a REAL ID or an acceptable alternative. This position may require the successful candidate to travel by air for business reasons or service federal property. Accordingly, successful candidates must have, or be willing to obtain, a REAL ID or TSA‑approved alternative. When you drive for WM, you join a team of the best drivers in the nation - professional, well trained, and skilled. Our drivers work hard and drive safe. They are rewarded with competitive pay, great benefits, opportunity for growth, and they are home at night and on the weekends. Our drivers are part of the fabric of the communities they serve. We show up on time, help keep your communities clean and watch out for the residents. Billy is just one of our many drivers going above and beyond for our customers. Video – WM Driver: Billy Shelby Driver/Operators are expected to operate vehicles and/or equipment in a safe and reliable manner. • Job Identification 2352932, • Job Category Drivers, • Posting Date 09/02/2026, 03:39 PM, • Job Schedule Full time, • Location

WALK IN WEDNESDAYS!!!! Every Wednesday from 10AM -2PM Pay Range: $25.00-$30.00 What is the value of a WM Job? At WM we know that the value of a WM job is more than a paycheck. It's a way to create opportunities for you and your family. This is why we are constantly working to make WM a great place to work and grow a career. We Are Always Working For A Sustainable Tomorrow®: Our mission is to leave the world a better place than we found it by helping its inhabitants find purpose in becoming its caretakers. We Are People First: The members of the WM family are the foundation for our success. We foster an environment where all teammates feel welcomed, valued and seen. We Are Committed to Your Growth : Your Tomorrow Education Assistance Program, paid on-the-job training, and established career progression. We Are Stable: From the front line to the corporate offices, our team members perform essential and meaningful work. We Are a Family: At WM we are over 60,000 people - from many places and many backgrounds, and it is our amazing differences that make us stronger. Ready to roll with us? Click Apply to join the WM team today. I. Job Summary Drivers operate heavy-duty trucks with front, side, or rear-end load lift attachments dependent on the line of business they're operating in and the type of truck they're operating. Drivers will transport the material to a disposal, transfer or recycle facility when trucks reach legal load capacity. Commercial Drivers are responsible for providing the pick-up service of containers filled with waste or recyclable material. Containers may weigh in excess of 1,000 pounds and at times require drivers to maneuver wheeled containers to a pick-up stage area. Commercial Drivers navigate high-traffic and congested roadways, driveways, alleyways, and lots. Highly skilled backing maneuvers are essential to successfully perform this job. Residential Drivers are responsible for the collection of residential household waste or recyclable material and must safely maneuver vehicles in residential environments. Residential Drivers navigate high-traffic and congested roadways, driveways, alleyways, and lots. Roll-off Drivers are responsible for preparing, loading, and transporting large mobile open-top and compactor containers from customer locations. Roll-off Drivers will navigate driveways, alleyways, lots, and high-traffic roadways and may operate in tight overhead environments while on industrial routes. Highly skilled backing maneuvers are essential, to successfully perform this job. II. Essential Duties and Responsibilities + Operates vehicle in accordance with Waste Management Safety and Life Critical Rules, OSHA (Occupational and Safety Health Act) and DOT (Department of Transportation) requirements as well as all local, state and federal laws. + Performs pre and post-trip inspections of assigned vehicle and documents checks utilizing the standard DVIR (Driver Vehicle Inspection Report). + Immediately reports all unsafe situations or service-related issues to Operations Manager or Dispatch. + Attends and participates in all scheduled training programs, briefings, and meetings as required by WM or directed by the Route Manager. + Works closely with Operations Manager to improve route efficiencies and identify best practices. + Notifies Operations Manager of any incidents, accidents, injuries, or property damage. + Notifies Operations Manager or Dispatch of service interruptions including closed or impassable streets or alleyways, receptacles too heavy to service or potential safety hazards. + Communicates customer requests to Operations Manager or Dispatch. + Completely dumps all receptacles and leaves the customer's location clean and free of debris. + Follows route assignments as directed and completes end-of-day documentation and check-out process. + Performs all duties as scheduled by Operations Manager or Dispatch and assists other drivers as directed to meet customer needs. III. Qualifications A. Required Qualifications + 1 year operating a vehicle requiring a CDL or + 1 year equivalent military driving within the last 7 years and + Must be at least 18 years of age and legally eligible to work in the country where the position is located and + Able to read, write, and speak English well enough to interact with the public, understand traffic signs, respond to official questions, and complete records or reports and + Successfully complete pre-employment screening, including drug screen and physical + Commercial Driver License (CDL) Class A with an air-brake endorsement or + Commercial Driver License (CDL) Class B with an air-brake endorsement B. Preferred Qualifications + High School Diploma or GED (accredited) IV. Physical Requirements Listed below are key points regarding physical demands, physical and occupational risks, and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. + Standing + Walking + Lifting + Pushing + Pulling + Crouching + Reaching + Handling + Sitting + Talking + Hearing This role is designated as safety sensitive and will require the successful candidate to strictly comply with all safety rules and protocols. As part of the ongoing employment requirements, the successful candidate may be subject to drug and alcohol testing-including pre‑employment screening, post‑incident evaluations, reasonable suspicion checks, and random testing-in accordance with government regulations and company policies. Pay : The expected base pay range for this on-site position is $25.00 - $30.00. This range represents a good faith estimate for this position. The specific salary offered to a successful candidate may be influenced by a variety of factors including the candidate's relevant experience, education, training, certifications, qualifications, and work location V. Benefits At WM, each eligible employee receives a competitive total compensation package that includes medical, dental, vision, life insurance, and short-term disability. In addition, we offer a stock purchase plan, company matching on a 401(k), and more. Employees also receive paid vacation, holidays, and personal days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click Apply. Equal Opportunity Employer: Minority/Female/Disability/Veteran

Whether you're creative, strategic, persuasive, or mechanically inclined, there's a place for you here. Be a problem-solver, a closer, a futurist - whatever drives you. At ProMach, you'll be challenged and rewarded as you help improve packaging performance and shape the future of automation. And we'll be proud to have you on the journey. Do we have your attention? Keep reading. Modern is seeking a talented equipment/machine Assembler. A high degree of problem-solving ability is required to assemble complex and precision mechanical assemblies and complicated mechanisms to build a quality product. The machinery has critical dimensional specifications and operating relationships where fitting of components, calibration of operating units, alignment and/or balancing of completed assemblies requires the application of skilled mechanical principles and a broad knowledge of assembly techniques. The Assembly Technician assists with final inspection and testing of machinery to ensure equipment meets performance standards and requirements. ProMach is a family of best-in-class packaging solution brands serving manufacturers of all sizes and geographies in the food, beverage, pharmaceutical, personal care, and household and industrial goods industries. ProMach brands operate across the entire packaging spectrum: filling, bottling and capping, decorative labeling, flexibles and trays, pharma, handling and sterilizing, labeling and coding, robotics end of line, and systems and integration. ProMach is headquartered near Cincinnati, Ohio, with manufacturing facilities and offices throughout North America, Europe, South America, and Asia. Modern is a leading provider of cup and tray filling solutions for the food, beverage, and dairy industries, with systems capable of filling everything from dry foods to viscous liquid products into single- and multi-serve packages. Modern designs equipment that incorporates denesting, loading, filling, foil/plastic lid sealing, and overcapping technologies for cups and trays, helping customers automate the entire front end of their packaging process with a single partner. For more than three decades, customers have put their trust in Modern systems to aid in feeding communities in all parts of the world. Modern is a product brand of ProMach, a global leader in packaging line solutions. As part of the ProMach Filling business line, Modern helps our packaging customers protect their reputation and grow the trust of their consumers. ProMach is performance, and the proof is in every package. Modern is seeking a talented equipment/machine Assembler. A high degree of problem-solving ability is required to assemble complex and precision mechanical assemblies and complicated mechanisms to build a quality product. The machinery has critical dimensional specifications and operating relationships where fitting of components, calibration of operating units, alignment and/or balancing of completed assemblies requires the application of skilled mechanical principles and a broad knowledge of assembly techniques. The Assembly Technician assists with final inspection and testing of machinery to ensure equipment meets performance standards and requirements. The position reports to the Applications Engineering Coordinator. Responsibilities are listed below: • Read and interpret engineering prints, specifications, electrical schematics, pneumatic drawings, manufacturing manuals, and or verbal and written instructions to determine necessary assembly of machine., • Plan assembly procedures and methods to assure efficient and timely progress., • Assemble complex mechanical units where a high degree of problem-solving, extreme care, skilled workmanship and accuracy are required to meet strict inspection, testing and operating specifications, • Position, erect, align and level sub-assemblies, units, and separate components and integrate their operations. Performs fitting, aligning, timing, calibrating and other operations incidental to the mechanical assembly of the machine., • Tests machines using prescribed testing methods to help ensure machine meets performance requirements before shipment to customer., • Use a variety of hand and power tools., • Inspect parts for proper machining finish and dimensions., • Use a variety of precision measuring and gauging instruments e.g. scale, calipers, etc., to inspect and verify conformance of parts to specifications/tolerances., • Strictly follows all safety requirements for hand and power tool operation, the assembly of parts, forklift and hoist operation, and housekeeping., • High School degree or equivalent, Technical degree or training preferred, • 3 to 4 years' experience as a machinery assembler, • Good interpersonal skills and ability to handle a multi-tasked role and good organizational skills, • Math abilities to include knowledge of fractions and decimal equivalents. Basic understanding of Metric system measurements and conversion from inches/feet to mm/cm/m, • Ability to use precision measuring procedures, • Ability to read and interpret engineering drawings and general arrangement drawings., • Good mental and visual abilities along with good dexterity, • Regular attendance and daily punctuality are necessary for performing the job, • Ability to lift in excess of 25lbs At ProMach the education and experience you bring to a role with us matters. Placement within the salary range is based upon years of directly relatable experience for the position. These components, along with local and national compensation survey data, contribute to determining a candidate's potential starting rate of pay. Total compensation includes your base salary, commissions, medical/dental/vision insurance, life insurance, disability, paid time off, and a retirement savings plan with company match. There is no waiting period for benefits – you are eligible on your first day of employment. Base Salary Range: $20-$25 an hour. Please note that the pay ranges listed on external job boards, outside our posting details, do not accurately reflect our internal compensation ranges. Pro Mach is an Equal Opportunity Employer. Pro Mach utilizes E-Verify to verify employment eligibility of new hires to work in the United States. Pro Mach is a drug-free workplace. What's in it for you? There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career. In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. Total compensation includes your salary, comprehensive medical/dental programs, as well as life insurance, a generous paid time off program, and a retirement savings plan with a company match. And because we understand the importance of feeling protected, there is no waiting period for benefits – you are eligible on your first day of employment! Please note that the pay ranges listed on external job boards, outside our posting details, do not accurately reflect our internal compensation ranges. Pro Mach, Inc. was named to the Inc. 5,000 list of the fastest growing private companies in the U.S. seven times. We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities. We have the rewards, opportunities, and the market strength of a large organization combined with the entrepreneurial culture of a small, fast-paced company. You will enjoy the benefits of working with a growing company that competes globally, with the personal touch and feel of a smaller company where you can make an impact every day. ProMach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Job Description Resident Engineer / Construction Inspector My name is Bill Stevens, and I have a new full-time Resident Engineer / Construction Inspector opportunity available for a major firm located in Islip, Long Island that could be of interest to you, please review my specification below and I am available at any time to speak with you so please feel free to call me. The work schedule will be onsite in the firms' offices on Islip, Long Island. This position will be paying a competitive fulltime salary in the range of $90,000 - $110,000 plus an outstanding benefits package which includes paid reimbursement for the candidates P.E or EIT. Responsibilities: The firm is seeking a resident engineer / construction inspector for civil-structural related work. Current projects include an Electric Power Generating Station in Brooklyn, NY where the firm is overseeing the rehabilitation of a large pier including the encasement of piles below the waterline as well as overseeing geotechnical investigations of potential future development site. Other current project sites include a Generating Station (façade and structural remediation efforts) and power plant (pier and pile cap restoration projects). The ideal Resident Engineer / Construction Inspector for these projects will oversee the contractor’s work as well as coordinating the firms dive inspection consultant. Additional work includes oversight of construction of large commercial and industrial pre-engineered metal buildings). Experience: The ideal candidate should possess a PE (Professional Engineering) education which is preferred however a candidate with EIT (Engineer in Training) and possesses field construction or construction oversight experience, particularly in the civil and/or structural disciplines will be considered. This position requires the ideal candidate to possess either a civil and / or structural engineering background. The interview process will include an initial telephone or Zoom screening. Please let me know your interest for this position, availability to interview and start for this position along with a copy of your recent resume or please feel free to call me at any time with any questions. Regards Bill Stevens Senior Technical Recruiter PRI Technology, Denville, New Jersey 07834 973 - 732 - 5454 x21 973 - 354 - 2799

Job Description Construction Inspector / Resident Engineer My name is Bill Stevens, and I have a new full-time Construction Inspector / Resident Engineer opportunity available for a major engineering firm located in Islip, Long Island that could be of interest to you, please review my specification below. The work schedule will be onsite in the firms’ offices in Islip, Long Island and in Brooklyn, New York. This position will be paying a competitive fulltime salary in the range of $90,000 - $110,000 plus a comprehensive benefits package, P.E (Professional Engineer) education reimbursement and bonus structure. Responsibilities: Serve as the engineering firm’s representative on-site, providing daily oversight of contractors’ work to ensure compliance with approved plans, specifications, codes, and regulations. Monitor and document construction activities, including materials testing, quality control, safety compliance, and project progress. Review and interpret contract documents, shop drawings, RFIs, and submittals. Prepare detailed daily inspection reports, maintain accurate project records, and track progress against schedules. Conduct field inspections of structural and civil components, including foundations, concrete, steel, utilities, roadways, and site improvements. Coordinate with contractors, design engineers, utility companies, and municipal agencies to resolve technical and field-related issues. Review change orders, progress payments, and assist with project closeout documentation. Ensure construction adheres to all federal, state, and local codes as well as client requirements. Current Projects that the firm is undertaking: Current projects include an Electric Power Generating Station in Brooklyn, NY where the firm is overseeing the rehabilitation of a large pier including the encasement of piles below the waterline as well as overseeing geotechnical investigations of potential future development site. Other current project sites include a Generating Station (façade and structural remediation efforts) and power plant (pier and pile cap restoration projects). Experience: Bachelor’s degree in Civil Engineering or Structural Engineering required. Professional Engineer (PE) license in NY is preferred but it is NOT required, in fact the firm will take steps to sponsor for the ideal candidates (PE) as well. More than five years of experience in construction inspection, resident engineering, or construction management. Knowledge of NYSDOT, NYCDDC, or other local agency standards would be a plus only and is NOT required. Strong understanding of structural systems, site/civil construction, materials testing, and safety standards. Excellent written and verbal communication skills for report writing and stakeholder coordination. Ability to work in the field in varying conditions and occasionally travel to project sites throughout New York City (5 boroughs), Nassau, and Suffolk Counties. The interview process will include an initial phone or Zoom screening. Please let me know your interest for this position, availability to interview and start for this position along with a copy of your recent resume.

Job DescriptionMavis Tires & Brakes at Discount Prices - Automotive Alignment Technicians Put your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for a full-time Automotive Alignment Technicians to join Team Mavis at one of our state-of-the-art automotive service, repair and tire sales centers in the Deer Park, NY area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. About the Position of Automotive Alignment Technician Automotive Alignment technicians use the latest equipment to align newly-mounted tires and wheels on customer's vehicles. By measuring and adjusting caster, camber, toe and thrust angles, our Automotive Alignment Technicians reduce customer's tire wear and ensure serviced vehicles travel straight and true. Mavis's Alignment Technicians also complete state-mandated inspections, oil and filter changes and flat repairs, and perform any other required automotive service or vehicle repairs to customer vehicles.Employee BenefitsAt Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement.QualificationsWe recruit team members who share our commitment to providing complete customer satisfaction and delivering the highest quality service. To be eligible for the position of Automotive Alignment Technicians you must (1) be at least 18 years of age; (2) be legally authorized to work in the United States; and (3) possess 1 year of experience and/or training in dismounting, mounting, rotating and balancing tires or any combination of education, training and experience which demonstrates the ability to perform the duties and responsibilities of the position. In addition, it is preferred that Alignment Technicians possess a state inspection license.As an active position, Automotive Alignment Technicians are required to stand, walk, bend, kneel, stoop, crouch, crawl, climb, pull, reach and perform repeated and repetitive movements consistent with vehicle and tire maintenance and repair. Alignment Technicians must regularly lift and/or move items weighing over 50 pounds. What are you waiting for? APPLY NOW!Candidates can apply online at www.mavis.com/careers. OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995.For more information about Mavis, please visit www.mavis.com.Mavis is an Equal Opportunity Employer Job Posted by ApplicantPro \nCompany Description Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value. We're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today! Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value.\r\n\r\nWe're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today!

Job Description We're looking for Autobody Preppers with a minimum of 5 years of professional automotive bodywork experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Heavy Body Technician, you'll be expected to train other autobody technicians and perform extensive bodywork on multiple panels, including: • Heavy plastic welding/stapling, • Heavy metal pulling, straightening, shrinking, and stud welding, • Roof and rocker panel repair Large area, heavy bodywork (including Bondo repair) At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: Pay Range: $33 - $41 Hourly We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 690-7853, Monday through Friday, between 6 AM and 4 PM PT (9AM to 7PM ET). Not a match for this role? We have a variety of prep roles available, depending on your experience - look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Prepper (min 1 year professional experience): perform light bodywork, including prepping, sanding, and buffing vehicles, removing and installing bumpers, single panel repair (including Bondo repair), and minor plastic welding, • Mid-Level Prepper (min 3-5 years professional experience): perform bodywork on multiple panels, including heavy plastic welding, minor metal pulling, roof and rocker panel repair, stud welding, and large area heavy bodywork (including Bondo repair), • Experienced Prepper (min 5 years professional experience): train other autobody technicians and perform extensive bodywork on multiple panels, including plastic welding, metal pulling, roof and rocker panel repair, and stud welding We also have a variety of other automotive roles available in one of our 18 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: Lube and Oil, Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Car Porters), Photo, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Position Summary We are seeking a highly experienced and dependable Field Shift Supervisor to lead a team of Field Inspectors across various pre-determined sites throughout New York City. This position is ideal for retired law enforcement professionals with strong leadership skills and a commitment to public safety and operational excellence. The Field Shift Supervisor will be responsible for assigning inspection locations, ensuring team performance aligns with company expectations, and personally responding to emergency situations when they arise. Various Shifts Available! Part-Time and Full-Time Pay Rate: $35 an hour WHY SHOULD YOU CONSIDER WORKING AT ARROW SECURITY? Wouldn't you like to be part of an organization that respects and values all of its people? Where each person can make a difference and be heard because every person's role in the organization is important? At Arrow Security, we challenge our people in a beneficial way to grow both personally and professionally. We strive to offer the best compensation, benefits, flexibility and unique perks possible while promoting a positive work-life balance. At Arrow, we understand how important this is to our people. And our people are important to us. Here is some of what we offer our valued security staff: • Weekly pay, • Internal growth opportunities, • Flexible scheduling opportunities, • Employee PERKS program, including discounts on everyday purchases with many of our partners Essential Job Responsibilities: • Supervise and manage a team of Field Inspectors, • Communicate expectations and directives from the Manager on Duty, • Conduct field inspections as needed and ensure quality standards, • Respond to and manage emergency situations, coordinating appropriate personnel and services, • Prepare detailed incident and investigation reports, • Maintain compliance with all company and client policies Minimum Qualifications/Requirements: • Retired Law Enforcement Professional, • Valid NYS Armed Security Guard License, • Ability to legally carry a firearm in all 5 NYC boroughs, • Minimum 5 years of management or supervisory experience, • Valid NY State Driver’s License, • Associate’s degree or higher, • Exceptional written communication and report writing skills, • Ability to use company software for site inspections, • Must pass company and client background checks, including TWIC clearance, • Must be able to obtain and maintain FDNY certifications (F-01, F-02, F-03, F-04, P-15, C99), • CPR-AED certification is a plus Founded in 1985, Arrow has perfected our approach to high quality security. As a true Super Regional guarding company, we are large enough to provide our Clients and Officers with the resources, technology, and supervision to deliver a superior security program while being nimble enough to react quickly and deliver an exceptional customer and employee experience. "We Care" about our Officers and make sure to take care of the people that take care of our Clients. Arrow Security is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. If you have a disability that requires an accommodation to complete the application process, please email Arrow Security Human Resources Department at HRresolutions@arrowsecurity.net. Please include your full name, contact information and details about your request in the email.

Job Description Position Summary A growing dietary supplement manufacturer and packaging company is seeking an experienced, hands-on quality leader to direct its Quality Unit. The Director of Quality Assurance & Regulatory Compliance will have primary responsibility for the company's cGMP quality management system, NSF certification, regulatory inspection readiness, and product-quality decisions. This individual will serve as the company's principal representative during NSF, FDA, customer, and third-party audits and will have independent authority to place materials and products on hold, approve or reject materials and finished batches, require corrective action, and escalate quality or regulatory risks directly to senior management. Primary Responsibilities • Own and continuously improve the site Quality Management System in accordance with 21 CFR Part 111, applicable provisions of 21 CFR Part 117, NSF/ANSI 455-2, company procedures, and other applicable requirements., • Serve as the primary host and company representative for NSF, FDA, customer, and third-party audits and inspections., • Maintain continuous inspection readiness and manage audit preparation, responses, corrective actions, and timely closure of findings., • Establish, maintain, and approve quality procedures, specifications, controls, and records covering manufacturing, packaging, labeling, laboratory, and warehouse operations., • Review and approve master manufacturing records, batch production records, and relevant changes before implementation., • Exercise final Quality Unit authority over quarantine, release, rejection, reprocessing, and disposition of raw materials, packaging components, labels, in-process materials, and finished products., • Lead investigations involving deviations, nonconformances, out-of-specification results, foreign objects, contamination risks, and other unanticipated occurrences., • Own root-cause analysis, CAPA, change control, and effectiveness-verification programs., • Oversee supplier qualification and requalification, COAs, raw-material specifications, incoming-material controls, and applicable vendor quality agreements., • Oversee internal QC laboratory activities and external laboratory relationships, including sampling plans, scientifically valid methods, testing, data review, calibration, validation, stability, and reserve-sample programs., • Ensure documentation and data meet cGMP requirements for accuracy, completeness, traceability, and contemporaneous recording., • Direct complaint, return, adverse-event quality investigation, recall, and mock-recall processes in coordination with senior management and counsel., • Review product labels, Supplement Facts panels, ingredient declarations, and relevant product claims for regulatory compliance in collaboration with Product Development, Marketing, and legal counsel., • Support retailer and marketplace compliance requirements, including GMP certificates, COAs, laboratory documentation, and manufacturer relationship documentation., • Maintain applicable facility registrations, certifications, regulatory correspondence, and audit calendars., • Establish and monitor quality metrics, recurring management reviews, internal audit programs, and compliance-risk reporting., • Develop and deliver cGMP training for manufacturing, packaging, warehouse, laboratory, and administrative personnel., • Lead, coach, and develop Quality Assurance and Quality Control employees while promoting accountability, respectful communication, and constructive cross-functional problem solving., • Build documented succession and cross-training within the Quality Unit to eliminate single-person dependency for critical compliance functions. Authority The Director of Quality Assurance & Regulatory Compliance will have: • Independent authority to quarantine, hold, approve, reject, release, or require further investigation of materials and products., • Authority to stop or restrict an operation when product quality, consumer safety, or regulatory compliance may be compromised., • Direct and unrestricted access to senior executive leadership for material quality or compliance concerns., • Quality responsibilities organizationally distinct from Production and Manufacturing. Required Qualifications • Bachelor's degree in chemistry, biochemistry, pharmaceutical science, microbiology, food science, chemical engineering, or a related discipline, or an equivalent combination of education and directly relevant experience., • At least 8 years of progressive quality experience in dietary supplement, nutraceutical, food, or pharmaceutical manufacturing, with substantial direct dietary supplement experience strongly preferred., • At least 3 years leading a Quality Assurance, Quality Control, or regulatory compliance function., • Expert working knowledge of 21 CFR Part 111 and practical experience applying its requirements within a manufacturing facility., • Direct experience preparing for and personally leading NSF/ANSI 455-2, FDA, or comparable dietary supplement manufacturing audits and inspections., • Demonstrated experience with QMS administration, SOPs, document control, CAPA, deviations, OOS investigations, change control, supplier qualification, batch review, and product disposition., • Experience with tablet and capsule manufacturing and dietary supplement packaging operations., • Experience overseeing internal and third-party laboratory testing, COA review, and scientifically valid analytical or microbiological methods., • Strong written communication, documentation, judgment, and audit-room leadership skills., • Demonstrated ability to communicate respectfully and constructively with employees at every level of an organization. Preferred Qualifications • Master's degree in a relevant scientific discipline., • ASQ Certified Quality Auditor, Certified Manager of Quality/Organizational Excellence, or comparable credential., • NSF/ANSI 455-2 auditor training., • HACCP, PCQI, FSVP, food-defense, or recall-coordinator training., • Experience with USDA Organic, Amazon dietary supplement verification, or other retailer compliance programs., • Experience using ERP, electronic QMS, document-control, or LIMS systems. A Ph.D. is welcome but not required. Demonstrated dietary supplement cGMP leadership and successful audit experience are more important than academic credentials.

Job Description iRocket is developing fully autonomous, fully reusable small launch vehicles to provide responsive, cost-effective access to space. Our mission is to catalyze a new era of space exploration through innovation in propulsion, structures, and sustainable launch systems. The Role: We are seeking a Mechanical Engineer to contribute to the design, development, and transition of mechanical components and systems from development through production. You’ll partner with propulsion, manufacturing, integration, and test teams to help deliver high-performance, reliable rocket hardware. • Act as Responsible Engineer for key subsystems or components (e.g., valves, mechanical assemblies), • Advance design of parts and assemblies: create CAD models, drawings, and associated documentation, • Perform mechanical analyses, calculations, and design iterations to meet performance, mass, and reliability targets, • Collaborate with manufacturing teams to ensure designs are manufacturable, and iterate designs based on feedback, • Support fabrication, post-processing, inspection, and tolerance verification of parts, • Assist with integration, assembly, and test of mechanical and propulsion subsystems, • Create schematics, document design and manufacturing processes, and maintain records, • Participate in test campaigns, support troubleshooting, and analyze results, • Communicate progress, issues, and tradeoffs clearly across cross-functional teams, • Ensure safe practices and adherence to PPE and safety standards in lab, shop, and test areas Requirements • Bachelor’s degree in Mechanical Engineering or a related engineering discipline, • 3+ years of experience in mechanical design, development, fabrication, assembly, or test, • Proficiency in CAD, • Knowledge of GD&T, tolerance design, part and assembly drawings, • Strong problem solving, analytical thinking, and collaboration skills, • Excellent written and verbal communication skills, • Ability to manage multiple tasks in a fast-paced environment, • Experience in aerospace, propulsion, or high-reliability systems, • Hands-on engineering background (design to bench to manufacturing), • Experience with simulation or analysis tools (e.g. ANSYS, FEA), • Experience scripting or using tools such as MATLAB or Python, • Comfort iterating quickly, learning from experiments, and working through ambiguity Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description General Responsibilities: Perform a variety of inspections on materials, precision machined components and electrical-mechanical assemblies to ensure compliance with requirements. Use a wide assortment of measuring instruments including hand tools and gauges, vision system equipment. Prepare quality documentation for final shipments per customer requirements. Specific Duties: • Ability to use inspection gauging and equipment to ensure conformance to all visual and dimensional drawing requirements. Gauging includes but not limited to; calipers, micrometers bore mics, depth, pin, thread and snap gauging. Operate equipment such as; profilometer, optical comparator, Keyence visual measurement system, height gauge, microscope, smart scope, etc., • Perform incoming and receiving inspection to specified requirements., • Perform inspection of finished details and assemblies to specified requirements., • Enter inspection results into a variety of data collection tools and databases., • Inspection of Soldered and brazed assemblies. Candidate requires internal certification for solder inspection., • Keep accurate records and maintain quality documentation., • Perform inventory movement transactions in the ERP system and ensure traceability of product., • Understand the non-conforming material process to ensure control of material., • Work and communicate with Quality, Supplier Quality, Engineering, and Manufacturing in a clear professional manner., • Write clear material rejection reports that contain problem statements, dimensions, and data., • Retrieve test data from databases and assemble documentation packages to ship with the product., • Use of ERP System in order to retrieve quality requirements and perform tasks related to moving product in system., • Perform tasks as assigned by the Inspection department Supervisor or Quality Manager., • Support the Company Quality Policy, • Generate FAI documentation to supply to customers with shipments as needed. Qualifications: Required Skills • Ability to read, and use micrometers, calipers, heigh gage and other measuring instruments, • Ability to read, and understand engineering drawings and related technical documents, • Working knowledge of Geometric Dimensioning and Tolerance (GD&T) principles and their application, • Basic Statistical Process Control and Statistical Fundamentals, • Experienced with ERP systems, • Strong planning and organizational skills, • Detail oriented, • Good interpersonal skills, • Strong verbal and written communication skills, • Strong math skills, • Visual Acuity mandatory (ability to visually identify color variations and capsule / tablet irregularities), • Flexible availability with regards to shift assignments when necessary, • Competent Microsoft Windows-Office and EXCEL applications Physical Requirements • Ability to lift, push or pull packages of up to 40 lbs., • Ability to work standing for long periods. Desired Skills • Basic Statistical Process Control and Statistical Fundamentals, • Minimum 3 years in a precision manufacturing or machining environment, • Experience with computer software like; Statistical Software, Access, advanced Excel Education and Experience: • Minimum education is High School Diploma, • Associates or higher in Technical Discipline/Trade preferred, • Minimum 3 years in a precision manufacturing or machining environment Compensation: $20.00 - $30.00 per hour based on experience GW Lisk is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Job DescriptionBenefits: • Free food & snacks, • Health insurance, • Paid time off, • 401(k) matching, • Competitive salary, • Dental insurance Technical Documentation & Process Specialist VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This dynamic position is a key part of the Operations Team. Responsible for establishing, maintaining and communicating technical record keeping procedures and maintaining Quality Assurance and Health & Safety Plans. Job Description: • Work with Engineering, Project Management and Manufacturing Personnel to generate, revise and implement various types of technical documentation to support the sale, design, assembly, installation and delivery of all Company systems and products, as required., • Revamp and maintain Company document control system for all forms of documentation including engineering drawings, quality documents, forms, customer-supplied documents, manuals and regulatory documents using both electronic and manual (paper) methods., • Oversight of all Engineering documents; to include generation, modification, and control of specification releases, ECNs, drawings, part numbers, and other related documentation., • Establish system and departmental procedures for proper record keeping; train and educate staff accordingly., • Maintain database of all documentation to allow for easy retrieval and modification., • Responsible for final approval of all system and component test and inspection reports., • Develop, implement and provide Project related QA and Health & Safety training programs., • Work with team on related process or documentation related projects and requirements as needed.Essential Skills:, • Bachelor’s Degree in a Technical Discipline, • A minimum of three (3) years of experience in a comparable Compliance, Quality Assurance, Technical Writing or Documentation Control position in a technical or manufacturing environment, • Proficiency in the English language with superior written and verbal communication skills, • Expertise in all Microsoft Office Suite products, • Hands on experience working with an ERP platform (GSS ERP "Global Shop Solutions" a plus), • Highly organized, detail oriented, self-motivated individual with strong interpersonal skills and the willingness and ability to work in a fast-paced dynamic environment, • Legally authorized to work in the US and successfully pass a complete background check and drug screeningNon-Essential Skills:, • Familiarity with x-ray technology and/or mechanical or electrical systems design, • Ability to understand and interpret various physical, mechanical, and electrical documents, blueprints, drawings and schematics., • Previous experience as a Trainer or providing safety, quality or related training or employee briefings., • Knowledge of OSHA standards and requirementsPhysical Demands and Mental Demands:, • Regularly required to sit, walk, bend, stoop and stand, • Will be required to lift, move, and erect components of varying weight, height, length and width dimensions, • Expected to effectively communicate in person, on phone, and via email and other electronic devices on a continual and repetitive basis, • Responsibilities could require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Specific vision abilities required include close vision, distance vision, • Must be able to fulfill essential job function in a consistent state of alertness and safe mannerThis job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. The company takes affirmative action to ensure that applicants and employees are treated during the application process and post hiring employment without regard to any of these characteristics. Discrimination of any type is not tolerated.

Job DescriptionDescription: The individual will prepare design data for mechanical aircraft parts and systems using reverse engineering practices and coordinate with certification and material engineers along with FAA Designated Engineering Representatives. They ensure that design features are consistent with functional performance and safety requirements for the aircraft system installation and with standard manufacturing practices. Additionally, the engineer investigates in-service equipment failures to determine root cause and develops repairs to return parts to service. This requires close communication with the engineering and sales teams to evaluate new project feasibility. Requirements: • Draft sketches and models of parts, • Conduct dimensional inspection of sample parts, • Prepare detailed dimensional analysis reports, • Research part function, failure modes, and operating conditions, • Determine appropriate material and performance specifications based on material analyses and testing, • Develop tolerance limits based on dimensional data, manufacturing capabilities, and part function, • Perform stress, fatigue, and structural analyses to support repair and design decisions, • Evaluate fits, tolerances, and surface treatments for machined, formed, and composite components, • Prepare production drawings using industry standards, • Troubleshoot failed in-service equipment to develop repair procedures for return to service, • Provide engineering support for procurement, manufacturing, receiving, and certification of parts, • Create technical documents using FAA guidelines and regulations, • Work with Designated Engineering Representatives to deliver complete certification packages to the FAA Experience and Skills • 5+ years of full-time relevant work experience (design, manufacturing, quality), • CAD/3D modeling design experience, • Familiarity with aerospace specifications and processes, • Experience and/or familiarity with reverse engineering a plus, • Working knowledge of machining, forming, casting, and other manufacturing processes, • Familiarity with material properties, heat treatment, and surface finishing processes (plating, coatings, anodizing), • Experience with structural, stress, or fatigue analysis for mechanical components a plus, • Experience with hydraulic, pneumatic, and/or mechanical aircraft systems is preferred, • Demonstrated general knowledge of drafting standards, • Proficient with SolidWorks, AutoCAD, MS Office applications, Adobe Acrobat, • Skilled in writing technical documents, • Shop time or other hands-on experience is preferred, • Understanding and familiarity with FAA standards is preferred, • Detail oriented and highly organized Education • Bachelors degree (or higher) in Mechanical Engineering or related discipline Compensation • Salary position commensurate with experience, bonus based on company and individual performance, • We offer medical, dental, vision, life and other insurance options; 401k with 100% match on first 4%; full time workers get paid holidays, vacation & sick/personal leave accrued on hire date. About Us PG Aerotech is an equal opportunity employer. For more information go to our website at www.pgaerotech.com

Job Description Job description: Mama’s Creations, Inc. (NASDAQ: MAMA) is a leading marketer and manufacturer of fresh deli prepared foods, found in over 8,500 grocery, mass, club and convenience stores nationally. The Company’s broad product portfolio, born as Mama Mancini’s, from a rich history in Italian foods, now consists of a variety of high quality, fresh, clean and easy to prepare foods to address the needs of both our consumers and retailers. Our vision is to become a one-stop-shop deli solutions platform, leveraging vertical integration and a diverse family of brands to offer a wide array of prepared foods to meet the changing demands of the modern consumer. For more information, please visit https://mamascreations.com. Exciting opportunity alert! A dynamic food manufacturer is on the lookout for a passionate Production Food Associate to join their vibrant team. Don't miss your chance to be a part of a thriving company that values your contributions. Position Summary: The FSQA Associate acts as a hands-on resource for daily food safety and quality checks, ensuring compliance with enterprise standards and Grandma Quality expectations. This role supports the Supervisor in training and guiding Associates. Key Responsibilities: • Perform pre-op inspections, in-process checks, and finished product evaluations., • Verify sanitation completion and environmental monitoring results., • Maintain accurate FSQA records and assist with audit preparation., • Train Associates on proper inspection techniques and documentation., • Report deviations and assist in root cause analysis. Qualifications: • High school diploma or equivalent; technical training in food safety preferred., • 2+ years of FSQA or QA experience in food manufacturing., • Familiarity with HACCP, GMPs, and basic microbiological concepts. Essential Physical Requirements: • Ability to stand, bend, and lift up to 40 lbs., • Work in cold/hot environments and wear PPE consistently. Job Type: Full-time Benefits: • 401(k), • Employee discount, • Health insurance, • Paid time off, • Parental leave Application Question(s): • Experience in food manufacturing. Shift availability: • Someone who can work from 4 AM to 1:00 PM

Job DescriptionBenefits: • 401(k), • Health insurance, • Paid time off About the Role: Gensinger Fire Protection LLC is looking for a skilled Fire Sprinkler Mechanic to join our team in Centereach, NY! This is a great opportunity to work with a dedicated fire protection company where your craftsmanship and expertise will help keep homes and businesses safe every day. Responsibilities: • Install, inspect, test, and maintain fire sprinkler systems in residential and commercial properties, • Read and interpret blueprints, schematics, and technical drawings for sprinkler system layouts, • Cut, thread, and fit pipe for sprinkler system installations, • Perform routine inspections and preventative maintenance on existing fire suppression systems, • Troubleshoot and repair malfunctioning sprinkler heads, valves, and related components, • Ensure all work complies with NFPA codes, local fire codes, and safety regulations Requirements: • Minimum 3+ years experience in fire sprinkler installation, service, repair, inspection and maintenance., • Knowledge of NFPA 13, NFPA 25, and applicable fire protection codes, • Ability to read and interpret blueprints and technical drawings, • Proficiency with pipe fitting, threading, and hand/power tools, • Valid driver's license and reliable transportation, • Strong attention to detail, safety-conscious, and dependable work ethic, • OSHA 30 preferred OSHA 10 mandatoryAbout Us: Gensinger Fire Protection LLC is a trusted fire protection contractor serving all of Suffolk and Nassau County and parts of Westchester . We take pride in delivering high-quality fire sprinkler installations and services that protect lives and property. Our team is built on integrity, professionalism, and a commitment to safety. Our customers are our most valued asset therefore reliability and quality service is our number one priority. — making us a company our customers rely on and our employees are proud to be part of.

Job DescriptionDescription: If you are looking for the right opportunity but worried about losing your vacation time, starting over with benefits, or not having enough work - - We want to speak with you today! At Competition BMW, we believe our associates are our greatest asset. If you are looking for a career with an extraordinary company, Competition BMW is the perfect career choice. We believe in providing ongoing training and rewarding outstanding effort and results through bonus and commission programs. We are currently seeking experienced technicians to join our team. As a dealership, we understand the importance and value of having strong technicians on our team of all skill levels. What We Offer: • Medical and Dental, • 401K Plan, • Paid time off and vacation, • Growth opportunities, • Competitive pay, • Supportive work environment, • Advancement opportunities, promote from within Technician Specific Benefits: • Clean and professional work environment, • Air-conditioned shop, • State-of-the-art facilities equipped with the newest technology and equipment, • Aggressive weekly production bonuses, • Monthly efficiency bonus, • Highly productive and very busy shop, • Fully paid and supported BMW training, • ASE certification reimbursement, • Discounts on products and services, • Work environment OSHA certified to current Air Quality Standards Responsibilities: • Must be punctual and dependable, • Must be able to work a 5 day work week with optional 6th day as needed/desired, • Perform quality work as specified on the repair order with efficiency and in accordance with dealership/BMW policies, • Test-drive vehicles responsibly, • Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc., • Perform a quality multi-point inspection complete with technician video on every vehicle., • Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed. Provide an estimate of time needed for additional repairsRequirements:, • Strong technical background, • ASE certifications are ideal but not required, • BMW experience is preferred but not required, • Must have a clean & valid driver's license

Job Description Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in more than 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all essential functions, duties, or skills required for this role. Management retains the discretion to add or change the duties at any time. Responsible for performing inspections on in-house machined and/or purchased precision components, units, materials, equipment and all level of assembly and quality control programs to specifications. Interprets manufacturing drawings, diagrams, BOM’s and specifications that result in acceptance or rejection of the inspection. Reviews documentation and performs sampling and testing of incoming components, internally manufactured components, raw materials, and build of assemblies. Reviews and reports performance data. Ensures raw materials, in-process and finished products meet company and test standards. Determines or assists in determining methods and procedures necessary for inspection. Essential Functions: • Perform inspections of components to ensure compliance to drawings, customer specifications and workmanship standards., • Ability of using precision measurement instruments such as a caliper, micrometer, and other required gages applicable to measurements., • Familiar with mechanical measuring equipment such as Optical Gaging Product (OGP), and/or X-ray fluorescence (XRF), testing used to determine the elemental composition of materials., • Knowledge and understanding of different materials used in manufacturing (aluminum, brass, copper, etc.)., • Knowledge and understanding of tolerances and basic GD&T of blueprint drawings., • Visual inspection for workmanship and print compliance with aid of a microscope if applicable., • Maintain inspection logs and records., • Familiar with industry standards such as Mil Specs, IPC-A-610 and MIL-STD-883., • Additional tasks assigned by your supervisor/manager Qualifications: • High School Diploma or equivalent and a minimum of 6 years prior relevant experience or 2-year post-secondary/Associate degree with 2 years relevant experience., • Communicates with contacts typically within the department on matters that involve obtaining or providing information requiring explanation or interpretation to understand and reach agreement., • Follows established processes to complete tasks. Identifies problems and issues in straightforward situations. Escalates issues to supervisor for resolution., • Works to achieve operational targets within job area which has some impact on the overall achievement of results for the team. Work is somewhat limited in scope, typically on smaller, less structured task-related activities. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to maintaining a workplace that is inclusive, respectful, and free from discrimination, where all employees and applicants are treated with dignity and fairness. Employment decisions are made in accordance with applicable federal, state, and local laws. All qualified applicants receive equal consideration without regard to race, color, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender identity or expression, age, national origin, marital status, citizenship status, disability, protected veteran status, or any other characteristic protected by law. Narda-MITEQ complies with applicable Executive Orders, including affirmative action requirements for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and conducts pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at denise.nocerino@nardamiteq.com. Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job Description The Quality Assurance label inspector is responsible to work within the label department to ensure all labeling materials are handled according to stated procedures, as well as other responsibilities assigned by department Manager. Principal duties and responsibilities for this position include: • Records label and labeling material incoming lots into the Incoming Labeling logbook., • Generates initial AQL documentation for each incoming label and labeling material lot and ensures the proper documents are attached., • Creates an Inventory Control Record for each incoming labeling lot., • Samples and counts each incoming labeling lot., • Inspects and releases all incoming labels and labeling material, using master overlays, UPC scanner, and visual defect inspection and documents finding., • Reconciliation of incoming labeling after counting and inspection process, • Counts labels and IFC’s returns after packing operation is completed and documents quantities on inventory control records., • Transferring labels and labeling materials returns into active inventory., • Reconciles labels, labeling material, and shipper labels upon packaging completion., • Assist in entries of final quantities of labeling materials for all competed packaging work orders for consumption in sage., • Performs Monthly label and label material inventories., • Inspects and releases incoming labels, and labeling materials using labeling masters, overlays, UPC scanner, and visual defect inspection., • Warehousing of all labels, released, returned and movement of inventory based on storage requirements., • Coordinates Individual Folding Carton transfers., • Label destruction / Label returns, • Daily verification of UPC scanners, • Daily and annual verification and validation of label counters., • Maintenance of Incoming Labeling logbook, • Assistant in inventory discrepancies investigate. Required Skills and Experience • Computer proficiency Word, Outlook, • Strong verbal and written communication skills, • Must be able to stand for an entire shift, • Must be able to bend, twist, and squat, • Must have good vision, aided by glasses if Necessary, • Experience in pharmaceutical environment preferred, • In-depth knowledge of cGMPs, fire, and general safety, • Physical Requirements – ability to bend, twist, reach, climb ladders, lift materials up to 25 lbs. and stand for an extended period of time, • Must successfully pass the Color Blind Test as (normal color vision) 12:00 pm to 8:30 pm

Job DescriptionGreat Opportunity CNC Lathe, Experience Needed. Koehler Instrument Co., Inc. is a leading manufacturer in the Petroleum / Petrochemical industry, providing quality testing instrumentation and technical support services for research and testing laboratories for more than 50 years. We currently have two openings in our manufacturing location with an opportunity to grow within. We are looking for experienced CNC Lathe positions to join our growing team. CNC Lathe - Set up and Operate F/T - 8:30 am to 5:00 PM The CNC Lathe setup is responsible for producing machined parts by programming, setting up, and operating, within a team, a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. Responsibilities: • Plans machining by studying work orders, blueprints, materials, specifications, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T)., • Program, setup and run CNC work centers, Lathes (Mori-Seiki Y axis a plus)., • Able to develop & write programs for the CNC lathe, working from prints, CAPS (Mori) a plus. Machine programming a plus., • Programs lathes, set tool offsets and fixture design., • Hold close tolerance of +/-.0005., • Verifies settings by measuring positions, first-run part, and sample workpieces; adhering to ASTM standards., • Able to edit existing programs as necessary., • Capable to input programs into CNC from PC., • Maintains safe operations by adhering to safety procedures and regulations., • Monitor tools during operation for wear and breakage.Qualifications:, • Live tooling is highly preferred., • Full use of reading micrometers & other inspection equipment., • Ability of sharpening tools a plus., • Functional and technical skills., • Attention to detail., • Ability to lift 100 lbs. with assistance.Koehler invites you to join our team of professionals, and enjoy the challenges and rewards of an ever growing and exciting industry. Equal Opportunity Employer Job Type: Full-time Salary: $30+ per hour Benefits: • 401(k), • Dental insurance., • Employee assistance program., • Employee discount., • Health insurance., • Life insurance., • Paid time off., • Retirement plan., • Vision insurance.Schedule:, • Day shiftWork Location: In person

Job Description Mama’s Creations, Inc. (NASDAQ: MAMA) is a leading marketer and manufacturer of fresh deli prepared foods, found in over 8,500 grocery, mass, club and convenience stores nationally. The Company’s broad product portfolio, born as MamaMancini’s, from a rich history in Italian foods, now consists of a variety of high quality, fresh, clean and easy to prepare foods to address the needs of both our consumers and retailers. Our vision is to become a one-stop-shop deli solutions platform, leveraging vertical integration and a diverse family of brands to offer a wide array of prepared foods to meet the changing demands of the modern consumer. For more information, please visit https://mamascreations.com Position Summary The Manager, Facilities is responsible for the enterprise-wide strategy, execution, and continuous improvement of facilities, and sanitation operations across all Mama’s Creations locations. This role ensures buildings, utilities, infrastructure, and site services are safe, compliant, environmentally responsible, and operationally reliable. This role is both strategic and hands-on. In addition to establishing enterprise facilities standards, systems, and priorities, the Senior Manager will actively support facilities and sanitation execution, including on-site troubleshooting, inspections, project support, and direct coordination with contractors and regulatory agencies, as needed. With a commitment to Grandma Quality, demonstrated by pride in workmanship, accountability, and leadership by example, partner closely with Program Management, Operations, FSQA, and site leadership to ensure facilities reliably support the overall operation today, while scaling for future growth. Key Responsibilities • Provide enterprise leadership for facilities operations across all manufacturing and office locations, including buildings, utilities, infrastructure, and site services. • Establish, execute, and continuously improve enterprise facilities standards, policies, and operating practices, while accounting for site-specific layouts, equipment, and operating conditions. • Serve as a hands-on facilities leader, actively supporting on-site facilities work as needed, including inspections, troubleshooting, project execution, and issue resolution. • Ensure facilities operations support safe, compliant, and efficient production and administrative. • Oversee preventive and corrective facilities maintenance related to building systems, including HVAC, refrigeration, electrical distribution, plumbing, compressed air, steam, water, and wastewater systems. • Own facility-related permitting and approvals, including building permits, inspections, certificates of occupancy, and associated documentation. • Serve as the primary enterprise interface with authorities having jurisdiction (AHJs), including building departments, fire marshals, environmental agencies, and utility providers. • Actively coordinate inspections, approvals, and close-outs, ensuring projects and modifications meet code, environmental, and operational requirements. • Lead and support environmental compliance programs, including wastewater, stormwater, air emissions (as applicable), hazardous materials handling, waste management, and spill prevention. • Own sanitation execution and readiness across all facilities in alignment with FSQAdefined standards, SOPs, and acceptance criteria., • Lead and manage a defined group of dedicated sanitation employees, ensuring staffing, training, scheduling, and execution meet operational and food safety needs. • Ensure sanitation activities are completed on time and to standard, supporting successful FSQA pre-operational inspections and production release. • Provide and maintain sanitation tools, chemicals, equipment, and infrastructure required for effective execution. • Own sanitation labor planning, budgeting, and cost control, to minimize spend while meeting FSQA standards, operational needs, and commitment to Grandma Quality. • Respond to and correct sanitation deficiencies identified by FSQA, ensuring timely and sustainable corrective actions. • Partner with Operations to align sanitation windows with production schedules while protecting food safety integrity. • Reinforce disciplined sanitation execution as a critical control system, not a support function. • Provide facilities leadership and hands-on support for CapEx projects, expansions, and facility upgrades, ensuring reliability, safety, and compliance are designed in. • Actively oversee and support office, and manufacturing facility upkeep, layout changes, and reconfigurations, ensuring offices and production areas are safe, functional, and reflect Grandma Quality in appearance and execution. • Oversee grounds and exterior facility maintenance, including landscaping, snow and ice removal, parking areas, walkways, and exterior lighting, ensuring safe access, regulatory compliance, and a professional, well-maintained appearance year-round. • Coordinate closely with Reliability & Asset Management on shared systems, infrastructure reliability, and asset lifecycle planning. • In partnership with Procurement, manage and directly engage third-party vendors and contractors, ensuring safety, quality of work, compliance, and cost control. • Develop, track, and review facilities and environmental KPIs, including work order completion, compliance status, inspection outcomes, and utility reliability. • Identify risks, constraints, and improvement opportunities related to facility condition, capacity, environmental compliance, and infrastructure readiness. • Participate in M&A diligence and post-acquisition integration, assessing facilities condition, permitting status, environmental risk, and infrastructure gaps. • Ensure facilities and environmental practices are standardized across locations, while allowing flexibility for site-specific needs. • Communicate facilities performance, risks, and priorities clearly to enterprise and site leadership. • Reinforce a culture of Commitment to Craftsmanship, safety, environmental stewardship, accountability, and respect through daily actions and expectations. Qualifications • Bachelor’s degree in Facilities Management, Engineering, Environmental Engineering, Industrial Maintenance, or related field. Relevant work experience will be considered for internal candidates. • 10+ years of progressive experience in facilities management within manufacturing or industrial environments. • 3+ years of experience leading facilities teams or site-based leaders in a multi-site environment. • Demonstrated ability to both lead and perform facilities work, including building systems troubleshooting and project execution. • Strong working knowledge of industrial building systems, utilities, and infrastructure., • Working knowledge of environmental compliance requirements, including wastewater, stormwater, waste management, and applicable air regulations. • Experience managing permits, inspections, contractors, and regulatory interactions., • Strong organizational, problem-solving, and leadership skills., • Ability to partner cross-functionally and lead through influence., • Experience in food manufacturing or other regulated environments. Essential Physical Requirements • Ability to regularly perform on-site facilities work, including walking, standing, climbing, bending, and navigating mechanical and utility spaces. • Ability to navigate stairs, ladders, catwalks, rooftops, and uneven surfaces safely., • Ability to wear required PPE, including safety shoes, gloves, safety glasses, hearing protection, and other protective equipment. • Ability to lift, carry, push, or pull up to 50 pounds., • Ability to work in varying environmental conditions, including temperature extremes, noise, humidity, and exposure to industrial systems. • Ability to travel between facilities as required., • Ability to sit for extended periods while performing planning and administrative work., • Ability to communicate clearly and effectively, verbally and in writing. This job description is intended to describe the general nature and level of work being performed. It is not an exhaustive list of all responsibilities, duties, or skills required. Duties, responsibilities, expectations, and reporting structures may change at any time based on business needs, organizational priorities, or operational requirements, with or without notice

Job Description iRocket is building the future of reusable launch via advanced manufacturing. We seek an Additive Manufacturing Engineer to lead the design, process development, and qualification of additively-manufactured rocket hardware. The Role • Develop, qualify, and produce additive-manufactured (AM) metal parts for propulsion, structures, and subsystems., • Optimize AM designs: design for additive manufacturing (DfAM), thermal-mechanical analysis, post-process workflows, non-destructive inspection, and certification., • Collaborate with materials, structures, manufacturing, and design teams to reduce cost, lead time, and improve performance., • Set process controls, parameter development, build-book documentation, qualification plans, and manufacturing readiness., • Drive iterative improvements, material science evaluations, cost-down strategies, and supply-chain integration. Requirements • Bachelor’s degree in Materials, Mechanical, or Aerospace Engineering., • 2+ years of experience in metal additive manufacturing, preferably in aerospace, defense, or complex systems manufacturing., • Experience with DfAM, CAD/CAE, thermal/structural analysis, post-processing, inspection, and qualification workflows., • Familiarity with powder-bed fusion, directed-energy deposition, hot isostatic pressing (HIP), heat treatments, and AM part certification., • Excellent teamwork, documentation, and process-improvement mindset. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Benefits/Perks • Competitive Compensation, • Great Work Environment, • Career Advancement OpportunitiesJob SummaryWe are seeking a Machinist to join our team! As a Machinist, you will be working with a variety of machines and manufacturing equipment as needed and per blueprint or job order specifications. You will also be repairing and maintaining your equipment as needed, assisting other machinists with larger tasks, and maintaining a safe work environment. The ideal candidate has exceptional attention to detail, previous experience in a manufacturing environment, and the ability to work well with minimal supervision. We are also seeking a Deburrer to join our team! As a Deburrer you would be conditioning parts making sure they are free of any burrs, general edge breaking making sure they ready for final inspection. Responsibilities • Read blueprints or job orders and make adjustments to equipment as needed, often with precision tools, • Check final products for accuracy, and make adjustments to machines as needed to ensure the best final product, • Conduct basic maintenance and repairs on equipment in your careQualifications, • Previous experience as a machinist or in a manufacturing environment, • The ability to read blueprints or job orders and make minor adjustments as needed to fulfill requirements, • The ability to use precision tools to take accurate measurements, • Excellent attention to detail, • Strong analytical skills

Job DescriptionQuality Inspector Location: Hauppauge, NY Pay Rate: $20.00 - $30.00 per hour (Based on Experience) Schedule: Full-Time Employment Type: Temp-to-Perm About the Opportunity Adecco is partnering with a leading Aerospace company. We are seeking a detail-oriented Quality Inspector to join a growing manufacturing team in Hauppauge, NY. This role is responsible for inspecting precision-machined components and assemblies, ensuring products meet engineering specifications and customer requirements. This is an excellent opportunity for individuals with quality inspection experience who enjoy working with precision measuring equipment, technical drawings, and quality systems. Successful candidates will have the opportunity to transition into a permanent position. Responsibilities • Perform incoming, in-process, and final inspections on components and assemblies, • Use precision measuring equipment, including calipers, micrometers, height gauges, bore gauges, thread gauges, and other inspection tools, • Read and interpret engineering drawings, specifications, and GD&T requirements, • Record inspection results and maintain accurate quality documentation, • Generate First Article Inspection (FAI) documentation as required, • Support non-conforming material processes and product traceability activities, • Prepare documentation packages for customer shipments, • Collaborate with Quality, Engineering, Manufacturing, and Supplier Quality teams, • Perform inventory and product transactions within the ERP system, • Assist with additional inspection and quality-related activities as assignedQualificationsRequired, • High School Diploma or equivalent, • 3+ years of quality inspection experience in a manufacturing, machining, or precision production environment, • Experience using precision measuring instruments such as calipers, micrometers, and height gauges, • Ability to read and interpret engineering drawings and technical documents, • Understanding of GD&T principles, • Experience working with ERP systems, • Proficiency with Microsoft Office and Excel, • Strong attention to detail and organizational skills, • Strong verbal and written communication skillsPreferred, • Associate degree or technical/trade school education, • Experience with optical comparators, Keyence systems, profilometers, microscopes, SmartScope equipment, or similar inspection technology, • Statistical Process Control (SPC) experience, • Experience with advanced Excel, Access, or statistical software, • Experience inspecting soldered or brazed assembliesPhysical Requirements, • Ability to stand for extended periods, • Ability to lift up to 40 pounds, • Strong visual inspection capabilitiesWhy Apply?, • Competitive pay based on experience, • Opportunity for permanent employment, • Stable full-time position, • Exposure to advanced inspection and measurement technologies, • Collaborative team environment, • Career growth opportunities within Quality and ManufacturingApply Today If you have experience in quality inspection, machining, manufacturing, aerospace, electronics, medical device, or other precision manufacturing environments, we encourage you to apply. Pay Details: $20.00 to $30.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.adecco.com/en-us/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.