Parts jobs in Cicero, New YorkCreate job alerts

Company: Gerber Collision & Glass Built with Intent. Driven by YOU. At the Gerber Collision & Glass, our teams work to provide the elite infrastructure and supportive environment you need to Be the Best and outperform at every touchpoint in collision and glass services. As we continue to grow and lead the industry, we ensure you have the resources and the team behind you to move your career forward. Ready to grow with a team that’s built for your success? Apply today. Our Commitment: The Boyd Group welcomes unique talents from all backgrounds and characteristics. We act with integrity and appreciate the diverse perspectives that make our "Greater Team" exceptional. Qualified individuals, including those with disabilities and Protected Veterans, are encouraged to apply. Job Description: The Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times. Key Job Responsibilities Ensure consistent execution of WOW (Wow Operating Way) plan. Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle. Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible. Realigns car chassis and frames to repair structural damage. Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed. Replaces or repairs interior parts as needed. Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent. Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair. Performs other related duties as assigned. Education and/or Experience Required High school diploma or equivalent required. Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer. Required Skills/Abilities Ability to read job orders and work with very little supervision. Ability to work with other repairers within an auto body shop. Thorough understanding of methods and procedures to repair vehicle bodies. Thorough understanding of how to use tools required for the trade. Other Requirements Must be able to work safely in a noisy area with many odors present. Must be able to lift up to 30 pounds at times. Must be able to visually inspect vehicle damage in a variety of weather conditions. Must be able to bend, stretch, kneel, and squat to perform repairs and inspections. Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job. Benefits That Drive Your Success Gerber offers the comprehensive benefits you expect from an industry leader, including: Annual Paid Time Off (PTO) plans 2 weeks of Paid Parental Leave for Full time Employees who work a minimum of 30 hours per week 6 paid holidays annually Medical, Prescription Drug, Dental & Vision Insurance effective Day 1 401(k) Retirement Plan with company match Employer Paid Short-Term Disability & Life Insurance Additional Voluntary Life Insurance Continuing Education Opportunities Free Prescription or Non-Prescription Safety Glasses annually Annual Voluntary Uniform Stipend Voluntary Daily Pay option available About Us Gerber Collision & Glass has been WOWing customers with our collision repair services for over 80 years. Please visit _ to learn more about our company. AI Disclosure Statement: At The Boyd Group and all affiliated companies, we do not use artificial intelligence (AI) or automated tools to screen, assess, or select applicants for employment. All hiring decisions are made by real people who review each application individually. Compensation Details: FLAT RATE Estimated $65,000 – $165,000+ per year Compensation is commensurate with skill, and experience.

Job Description Mavis Tires & Brakes at Discount Prices - Automotive Mechanics Put your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for full-time Automotive Mechanics to join Team Mavis at one of our state-of-the-art automotive service, repair, and tire sales centers in the Liverpool, NY area. With over 4,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. About the Position of Automotive Mechanic As Mavis's leaders in undercar repairs, our Automotive Mechanics are trusted to inspect, diagnose, and perform a wide variety of automotive services on customers' vehicles. Mavis's Automotive Mechanics perform a wide variety of undercar repairs, including brakes, struts, and shocks. Automotive Mechanics are also responsible for completing state-mandated inspections, changing oil and filters, checking fluids, replacing worn parts, and dismounting, mounting, rotating, and balancing tires. Employee Benefits At Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement. Qualifications We recruit team members who share our commitment to providing complete customer satisfaction and delivering the highest quality service. To be eligible for the position of Automotive Mechanic, you must (1) be at least 18 years of age; (2) be legally authorized to work in the United States; (3) possess 2 years of experience and/or training in automotive repair and maintenance or any combination of education, training and experience which demonstrates the ability to perform the duties and responsibilities of the position; and (4) possess an extensive tool box of personal tools used in performing undercar repairs. The following additional qualifications are preferred: (1) state inspection license(s); and (2) ASE Certifications in Automotive Maintenance and Light Repair (G1), Suspension and Steering (A4), and Brakes (A5). As an active position, Automotive mechanics are required to stand, walk, bend, kneel, stoop, crouch, crawl, climb, pull, reach and perform repeated and repetitive movements consistent with vehicle maintenance and automotive repair. Mechanics must regularly lift and/or move items weighing over 50 pounds. What are you waiting for? APPLY NOW! Candidates can apply online at www.mavis.com/careers. OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995. For more information about Mavis, please visit www.mavis.com. Mavis is an Equal Opportunity Employer Job Posted by ApplicantPro \nCompany Description Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value. We're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today! Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value.\r\n\r\nWe're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today!

Job Description PEP BOYS / Mavis Tire - Automotive Mechanics Competitive Weekly Pay + Weekly Incentive Compensation | Full-Time | Career Growth Opportunities Pep Boys is now part of the Mavis Tire family-and we're growing our team! We're looking for experienced, full-time Automotive Mechanics to join Team Mavis at our automotive service, repair, and tire sales centers in the Cicero, NY area. As part of the Mavis family, you'll have the stability of joining the nation's largest automotive service organization, with more than 4,000 locations, competitive weekly pay, excellent benefits, and opportunities to grow your career. About the Position As an Automotive Mechanic, you'll inspect, diagnose, and perform a variety of automotive maintenance and repair services to help keep our customers safely on the road. Responsibilities include: • Performing undercar repairs, including brakes, struts, shocks, suspension, and steering, • Diagnosing vehicle maintenance and repair needs, • Performing oil and filter changes and checking fluids, • Replacing worn or damaged parts, • Completing state inspections, where applicable, • Mounting, rotating, and balancing tires, • Maintaining Mavis standards for quality, safety, and customer service Why Join Team Mavis? We offer our Automotive Mechanics: • Competitive weekly pay + weekly incentive compensation, • Medical, dental, and vision insurance, • 401(k) with employer match, • Paid vacation, PTO, and holidays, • Life insurance, • On-the-job training, • Opportunities for career growth and advancement, • A stable, team-oriented work environment Qualifications To be eligible, you must: • Be at least 18 years of age and legally authorized to work in the United States, • Have at least 2 years of automotive repair and maintenance experience and/or training, or an equivalent combination of education, training, and experience, • Have the personal tools necessary to perform automotive and undercar repairs Preferred: State inspection license(s) and ASE Certifications, including Automotive Maintenance and Light Repair (G1), Suspension and Steering (A4), and Brakes (A5). Physical Requirements Automotive Mechanics must be able to stand, walk, bend, kneel, stoop, crouch, crawl, climb, pull, reach, and perform repetitive movements associated with automotive repair. Mechanics must also be able to regularly lift and/or move items weighing more than 50 pounds. Ready to Join Our Team? APPLY NOW! Apply online at mavis.com/careers. OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. Questions? Call our Recruitment Department toll-free at 844-375-3995. Join Pep Boys and Team Mavis-and build your career with a growing automotive leader. Mavis is an Equal Opportunity Employer. Job Posted by ApplicantPro \nCompany Description Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value. We're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today! Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value.\r\n\r\nWe're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today!

Job DescriptionAbout the Role:GD Mobile Truck Repair Inc is looking for a skilled Diesel Mechanics to join our team in Brewerton/Syracuse, NY! This is a hands-on opportunity to work on heavy-duty trucks and equipment with a company that keeps the transportation industry moving 24 hours a day. If you're passionate about diesel engines and take pride in quality repair work, we want to hear from you. Responsibilities: • Diagnose, repair, and maintain diesel-powered trucks and heavy-duty vehicles, • Perform engine overhauls, transmission repairs, and drivetrain servicing, • Conduct preventive maintenance inspections and routine service checks, • Troubleshoot electrical, hydraulic, and mechanical systems, • Repair or replace brakes, suspension components, and steering systems, • Document repair work, parts used, and service records accurately, • Ensure all work meets safety standards and DOT compliance regulationsRequirements:, • Proven experience as a Diesel Mechanic or Heavy-Duty Truck Technician, • Strong knowledge of diesel engine systems, electrical diagnostics, and hydraulics, • Ability to use diagnostic software and tools (e.g., J Pro, Cummins Insite, Detroit Diesel Diagnostic Link), • ASE certification or equivalent trade school training preferred, • Valid driver's license required; CDL a plus, • Own a basic set of mechanic's tools, • Ability to work independently, manage time effectively, and meet deadlines, • Strong attention to detail and commitment to safetyAbout Us:GD Mobile Truck Repair Inc is a trusted name in diesel truck repair serving the Brewerton, NY area and surrounding communities. We're known for our fast response times, quality workmanship, and dedication to keeping our customers' fleets on the road. Our team enjoys a supportive work environment where skilled technicians are valued and given the tools they need to succeed.

Job DescriptionAbout the Role:Join Gary's Auto in East Syracuse, NY, as a Mechanic, where you'll be at the forefront of automotive excellence. We are looking for passionate individuals who thrive in a fast-paced environment and are eager to contribute to our reputation for quality service. Responsibilities: • Perform routine maintenance and repairs on various vehicle makes and models., • Diagnose and troubleshoot mechanical issues using advanced diagnostic tools., • Replace worn or damaged parts, including brakes, belts, and tires., • Maintain accurate records of services performed and parts used., • Provide exceptional customer service and communicate repair needs clearly., • Stay updated on industry trends and advancements in automotive technology., • Adhere to safety protocols and maintain a clean working environment., • Collaborate with team members to enhance service efficiency and quality.Requirements:, • High school diploma or equivalent; ASE certification preferred., • Minimum 2 years of experience as an automotive mechanic., • Proficient in using diagnostic equipment and hand tools., • Strong problem-solving skills and attention to detail., • Ability to work independently and as part of a team., • Excellent communication skills and a customer-focused attitude., • Willingness to continue learning and adapting to new technologies.About Us:Gary's Auto has been serving the East Syracuse community for over 40 years, building a loyal customer base through our commitment to quality and integrity. Our team of skilled professionals takes pride in delivering exceptional service, making us a trusted choice for automotive repairs and maintenance.

Job DescriptionWiring Specialist Syracuse, New York Full Time Core hours: 6:00 AM – 2:30 PM. Geographic requirement: Must currently reside within 50 miles of Syracuse, NY. Key Responsibilities • Assemble and wire panelboards and other electrical products in accordance with engineering drawings and specifications., • Wire and solder electrical connections while maintaining continuity and protecting heat-sensitive components and delicate parts., • Read and interpret wiring diagrams, schematics, engineering specifications, and production documentation., • Assemble terminal blocks, wire breakers, and build wire harnesses., • Perform wiring and assembly work on D2L, EPL, D2D, EXD, ACE product lines, and other wired solutions., • Determine the appropriate wire type and size for different amperage requirements when not specified in drawings., • Collaborate with Engineering and Quality teams to resolve technical and production issues., • Prepare panelboards for component installation, including adding panel sections and drilling holes., • Mount plates and frames and assemble and wire starters, relays, transformers, switches, and circuit breakers., • Assemble electrical components into housings and perform GFI and hot testing of GFI components., • Install operating shafts, bearings, indicating plates, and external operating controls as specified., • Maintain product quality and ensure assemblies meet applicable requirements., • Keep the work area clean, orderly, and safe., • Perform Total Productive Maintenance (TPM) activities, including cleaning, inspection, minor lubrication, and tightening loose bolts., • Assist with the Material Replenishment System (M.R.S.) and floor stock system as required., • Identify and document errors in drawings, prints, production orders, and other manufacturing documentation., • Recommend engineering changes and process improvements., • Support teamwork and complete assigned training.Required Qualifications, • High school diploma or GED from an accredited institution., • Minimum of one year of experience in a manufacturing or production environment., • Experience working with wiring diagrams, schematics, and other wiring activities., • Ability to perform detailed electrical assembly and wiring tasks., • Ability to follow engineering specifications and production instructions., • Commitment to quality, workplace safety, and accurate documentation.Preferred Qualifications, • Additional educational or vocational training., • Experience assembling and wiring electrical panels or panelboards., • Experience with terminal blocks, wire harnesses, circuit breakers, relays, transformers, and switches., • Familiarity with electrical testing, including GFI testing., • Experience with manufacturing quality procedures and production documentation., • Familiarity with Total Productive Maintenance (TPM).

Job DescriptionThe core hours are 6:00 am to 2:30 pmWhat you’ll do: • Plan, layout and perform all operations pertaining to the installation, maintenance and repair of a wide variety of complicated electrical equipment and circuits used in various plant departments, powerhouse, and offices such as special automatic controls, electronic controls and recording instruments, generating equipment, large switchboards., • Install units including the making up of brackets, braces, hangers, etc. and perform necessary operations to secure and assure permanence. Tear down complicated units, determine extent of troubles, repair or replace defective parts or wiring and reassemble., • Repair or replace defective armatures and field coils; wind armatures and field coils., • Make connections on shunt and compound wound DC motors and synchronous squirrel-cage and induction AC motors; obtain field data and make corrections to variable and constant speed motors and calculate Ohmic resistance., • Install and wire motors for large machine tools such as floor type boring mills, intricate controls with multiple inter-locking and safety devices and involving the use of condulets, boxes and other similar equipment., • Maintain and repair electric and electronic controls and recording devices including the necessary cleaning and adjusting, the checking of tubes and circuitry and ordinary repairs and replacements., • Work from schematic drawings, manuals and testing procedures., • Detect and report all defective materials or faulty operations; diagnose and remedy unusual troubles., • Prepare wiring diagrams when necessary to facilitate work, after installation for permanent records or for changes to existing diagrams or drawings brought about by on-the-job conditions., • Install and maintain all types of electrical transmission lines, including high tension lines, motors, generators, distribution equipment and complicated apparatus and where the understanding of operating principles is essential to provide proper precautions., • Qualifications:Required (Basic) Qualifications:, • Journeymen or minimum three (3) years of documented maintenance experience in an electrical trade, • Must be able to work in the United States without corporate sponsorship now and within the future, • No relocation benefit is being offered for this position. Only candidates within a 50-mile radius of Syracuse, NY will be considered. Active-Duty Military Service member candidates are exempt from the geographical area limitation.

Saab, Inc. in East Syracuse, NY, is seeking an experienced Senior Assembler to join the Manufacturing and Production team. Responsibilities: • Work from wire diagrams, engineering drawings (blueprints), sketches, and written or oral instructions to create initial layouts and accurately assemble products., • Use hand and power tools as required to complete assemblies., • Disassemble, modify, rework, and reassemble production or prototype assemblies and subassemblies according to specifications., • Apply advanced electrical and mechanical assembly concepts to resolve complex issues and support company objectives., • Understand and apply electrostatic discharge (ESD) principles and safeguarding requirements., • Properly use hand tools, including torque wrenches, wire cutters, wire strippers, and crimpers., • Independently identify and resolve issues related to assigned tasks., • Operate equipment including fork trucks, automotive lifts, ladders, lifting platforms, and cranes., • May require limited travel, up to 10% annually. Compensation Range: $23.51 - $28.17 per hour The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Qualifications: • High School Diploma or equivalent., • 4+ years of relevant assembly or manufacturing experience., • Ability to read and interpret work instructions and assembly drawings., • Ability to work with materials ranging from small, intricate components to larger, heavier parts. Preferred Qualifications: • Experience working on manufacturing flow lines with multiple team members., • Background in automotive mechanics or a related field., • Ability to operate automated equipment and understand mechanical assembly and process flow., • Advanced support skills and extensive knowledge of tools, software, and related technologies. Physical Requirements: • Ability to lift up to 50 pounds., • Ability to climb stairs to elevated tower platforms., • Ability to stand and walk for extended periods., • Ability to work outdoors as required. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage Saab is a leading defense and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in ten U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Saab, Inc. is seeking a Senior Depot Specialist to join our team supporting defense products and systems deployed worldwide. The Senior Depot Specialist will provide responsive support for hardware and information needs to customers and Saab colleagues, maintain inventory and related records, coordinate vendor repairs for parts and equipment, communicate with internal and external stakeholders regarding support status and repairs, and collaborate with the team to ensure seamless, professional support to our customers. The ideal candidate will be highly motivated and possess significant experience supporting defense systems. This hands-on role requires extensive travel, sometimes on short notice, with assignments lasting longer than two months. Candidates must be able to work effectively in demanding operational environments, both independently and as part of a team. This position offers the opportunity to work with advanced defense technologies and contribute directly to mission success. Responsibilities include, but are not limited to: Work at remote depot facilities approximately 75% of the time. Receive, process, ship, and control inventory of Saab-owned and Government or Customer-owned parts and equipment. Communicate with repair vendors to support timely repair and return of equipment. Replenish inventory through Saab purchasing systems. Maintain accurate records related to inventory, parts processing, financial transactions, and repair status. Conduct physical inventories and cycle counts. Investigate and resolve inventory discrepancies. Ensure inventory accuracy and accountability. Establish and manage depot operations at new locations. Compensation Range: $34.62 - $43.27 per hour #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Qualifications: High school diploma required; BA/BS in a technical discipline preferred. Must hold an active U.S. DoD Secret security clearance or higher. Must be a U.S. citizen and meet eligibility requirements for access to classified information. Applicants selected may be subject to a government security investigation. Strong military, federal, or defense contractor experience in logistics, property accountability, depot operations, and maintenance support required. The most relevant military specialties include: Army: 92A (Automated Logistical Specialist), 92Y (Unit Supply Specialist), 91X (Maintenance Supervisor). Marine Corps: 3043 (Supply Administration and Operations), 3051 (Warehouse Clerk), 0411 (Maintenance Management Specialist). Navy: LS (Logistics Specialist), Supply Corps Officer. Air Force: 2S0X1 (Supply Management), 2R0X1 (Maintenance Management Analyst), 2A6X2 (Aerospace Ground Equipment). Experience within a military S4, N4, A4, or J4 shop. Highly aligned federal civilian backgrounds include: GS-0346 Logistics Management Specialist. Contractor experience in Government Property Administration or Asset Management (GFE, GFP, IUID, FAR 45). Experience in depot or warehouse operations. Desired Qualifications: Experience with computer systems and software, such as Microsoft Excel. Forklift experience desirable. Must be capable of lifting and moving components weighing up to 50 pounds. Must demonstrate reliability, strong organizational and time management skills, and the ability to multitask and follow up on action items and requests in a timely manner. Ability to thrive in a fast-paced, distributed environment. Strong oral and written communication skills. Focus on providing quality support and accurate information. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage Saab is a leading defense and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in ten U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job Description At 110 Metalworks, we’re more than a company – we’re a community. Committed to quality, innovation, and continuous improvement, we provide a supportive and rewarding work environment where over 50% of our team has been with us for more than a decade. We offer: • 4 x 10 Schedule, Day Shift, • Medical, Dental, and Vision Plans, • 401(k) with Company Match, • Company Paid Life Insurance, • Paid Vacation, Personal Leave, and Holidays, • Apprenticeship and training programs to help grow your career, • A strong team atmosphere built on collaboration and respect, • A commitment to our community and making a positive impact Join 110 Metalworks and discover a place where careers thrive, and people matter. About Us: We’re a team of makers, doers, and problem-solvers who take pride in building things that last. In our machine shop, we combine precision with teamwork—and we’re looking for an Assembly Technician who’s excited to jump in, learn, and contribute from day one. Requirements What You’ll Be Doing: • Putting together parts and tools using rivet guns, PEM setters, drills—you name it, • Installing fasteners and hardware with care and accuracy, • Reading basic blueprints (don’t worry, we’ll help if you’re rusty), • Solving small problems before they become big ones, • Working closely with a tight-knit team that’s got your back, • Staying organized and focused, even when things get busy What We’re Looking For: • 1-5 years of hands-on assembly experience (machine shop experience is a big plus), • Solid understanding of how to use common hand and power tools, • A keen eye for detail—you take pride in doing things right, • Good communication skills and the ability to follow directions (written and spoken), • A positive attitude, strong work ethic, and a self-starting mindset Benefits Pay Rate Range: $22.00 - $28.00/hr Depending on Experience Why You’ll Love It Here: • Supportive, team-first culture—we help each other succeed, • Opportunities to grow your skills and take on new challenges, • Competitive pay and solid benefits (healthcare, 401(k), time off—you know the drill), • A place where your work matters and your voice is heard 110 Metalworks Inc. is an EEO Employer - M/F/Disability/Protected Veteran Status

Join Our Team as a Manufacturing Manager!!! Consolidated Precision Products (CPP) is an investment casting foundry that specializes in complex aerospace & gas turbine components. With a stable business model and competitive compensation & benefits, CPP is a great option to consider as you look to make your next career move. We offer: Innovative Environment: Work in a world class investment casting site supporting the aerospace and industrial gas turbine industry. Collaborative Environment: Work alongside dedicated professionals in a supportive, team-oriented setting. Growth Opportunities: Be part of a company that values continuous improvement and offers career development opportunities. Competitive Benefits: Enjoy a comprehensive benefits package, including health, dental, and vison insurance, retirement plans, paid vacation, bonuses and more. Location: Chittenango, NY (On-site) Employment Type: Full-Time Salary: $70,000 - $100,000 For more information, please visit _ JOB SUMMARY The primary function of this position is to support team members to meet daily safety, quality, and production requirements. The following factors serve as expectations, and will be used to measure the relative performance for individuals in the Manufacturing Manager role: • Work with Team members and other leaders to monitor standards of work and process flow within the department or work area to meet production and customer requirements., • Responsible to execute goals and objectives for the plant. PRIMARY RESPONSIBILITIES • Lead the activities of team members of production of quality parts in accordance with work instructions and company policy to ensure a quality product delivered on time., • Responsible for maintaining safety standards as required by law and company policy., • Coach and provide technical expertise to resolve issues and create and ensure corrective action(s) are implemented., • Ensure the appropriate level of accountability for goals and objectives at the team member levels., • Monitor and take appropriate timely improvement action to meet production quality and quantity., • Utilize problem solving techniques, teamwork building strategies, process control, and continuous process improvement tools to meet or exceed the operating goals/metrics., • Facilitate team member workflow management, workforce scheduling and team member placement to ensure the facility and company goals are successfully met or exceeded., • Maintain adherence to company policies, safety standards and good housekeeping practices., • Responsible for the completion of Accident Investigation forms in areas of responsibility, • Responsible for implementation of safety countermeasures and doing root cause analysis to determine appropriate safety changes that are needed to improve plant safety., • Responsible to adhere to all site safety policies and procedures., • Coach and model safe behaviors, respect for environment and 6S behaviors., • Champion safety practices at the site. QUALIFICATIONS • Education: High School Diploma or General Education Degree (GED), • Experience: Manufacturing experience required., • Other Required Knowledge, Skills & Abilities:, • LANGUAGE SKILLS - Ability to read, understand and comprehend documents such as safety rules, operating and maintenance instructions, procedure manuals, Oracle reports and Internal Method Sheets (IMS). Ability to carry out instructions in written, oral or diagram form. Excellent team skills and ability to interact with other employees, engineers, and leadership. Ability to report progress and work with engineers to solve issues., • MATHEMATICAL SKILLS - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • REASONING ABILITY - Ability to deal with problems involving several concrete variables in standardized situations., • COMPUTER SKILLS - Knowledgeable of Microsoft Office and Manufacturing software WORKING ENVIRONMENT • The noise level in the work environment is usually moderate. Safety requirements for this position are safety glasses and steel-toed work boots., • Physical Demands: Standing/Walking long periods of time. Candidate will need to be able to stand/walk for extended periods of time up to 6+ hours at a time., • Travel Requirements: None NOTE: Consolidated Precision Products is an Equal Employment Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, disability, veteran status, genetic information, or any other characteristic protected under applicable law. It is the policy of the company to comply with all aspects of the Americans with Disabilities Act. Upon request, the company will provide reasonable accommodations to individuals with disabilities who need an accommodation to fully participate in the application process. All roles are restricted to U.S. persons (U.S. citizens, permanent residents and other protected individuals under the Immigration and Naturalization Act) due to access to export-controlled technology. CPP will require proof of status prior to employment. Note that we maintain a drug-free workplace, and all offers of employment will be contingent on satisfactory results of a drug & background screen. This is a management position This is a full time position Pay Range:

Job DescriptionJob Title: CDL Truck Driver (Class A or B)Job Description This role offers the opportunity to drive a variety of commercial vehicles and support a broad range of environmental services, including transportation and disposal, industrial maintenance, remediation, tank services, emergency response, and recycling. You will operate vacuum trucks, roll-off trucks, box trucks, and tanker trucks, as well as assist with environmental and industrial cleanup tasks across regional job sites. Responsibilities • Safely operate CDL Class A or CDL Class B commercial vehicles, including vacuum trucks, roll-off trucks, box trucks, and tanker trucks., • Understand, follow, and comply with all company and client safety standards, procedures, and regulatory requirements., • Operate various light and heavy equipment used in environmental and industrial maintenance and cleanup work., • Perform transportation and disposal services, industrial maintenance, remediation, tank services, emergency response, and recycling tasks as assigned., • Drive to job sites typically within the region, with the possibility of assignments throughout New York State and into neighboring states., • Work intermittently outdoors in varying weather conditions while performing environmental and industrial cleanup activities., • Interpret and follow written and oral instructions, work orders, and job assignments accurately., • Complete required pre-employment and ongoing DOT-related testing and maintain compliance with all driving regulations., • Maintain a clean driving record and uphold professional conduct while representing the company at client locations., • Conduct basic inspections of vehicles and equipment, report issues, and support routine maintenance as needed.Essential Skills, • Valid CDL Class A or CDL Class B license., • Minimum of two years of experience operating as a CDL Class A or CDL Class B driver., • Current Tanker and Hazardous Materials (HazMat) endorsements., • Clean driving record with the ability to meet pre-employment DOT testing requirements., • Ability to interpret and follow written and oral instructions and assignments., • Experience driving and working on regional projects with occasional travel within New York State and neighboring states., • Ability to work intermittently outdoors in a variety of environmental conditions., • Commitment to following safety standards and procedures for environmental and industrial work.Additional Skills & Qualifications, • Experience in the environmental services industry, such as transportation and disposal, industrial maintenance, remediation, tank services, emergency response, or recycling., • OSHA 40-hour HAZWOPER certification., • Confined Space Entry certification., • Experience operating light and heavy equipment in industrial or environmental settings., • Strong attention to detail and safety mindset when working on environmental job sites., • Ability to work overtime when needed to support project and emergency response demands.Why Work Here? Employees enjoy a comprehensive compensation and benefits package that supports both financial security and long-term growth. The role offers competitive pay with annual increases, overtime paid at time and a half with opportunities for double time, and performance-based bonuses. Team members benefit from health, dental, and vision insurance, a retirement savings plan, and paid time off. There are clear paths for personal development and promotion, as well as yearly clothing and boot allowances after the initial employment period, creating a supportive environment focused on safety, stability, and career advancement. Work Environment The standard work schedule runs Monday through Friday from 7:00 a.m. to 3:30 p.m., with regular opportunities for overtime. Work takes place on environmental job sites in and around the assigned territory, with potential travel throughout New York State and into neighboring states. The role involves operating trucks and equipment in industrial and environmental settings, with intermittent outdoor work in varying weather conditions. Employees use industry-standard environmental and industrial equipment and are provided with clothing and boot allowances to support appropriate work attire for field conditions. Job Type & Location This is a Permanent position based out of Liverpool, NY. Pay and Benefits The pay range for this position is $66560.00 - $74880.00/yr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. A competitive salary and annual increases. Overtime paid at time and a half and the opportunity for double time Bonuses Personal growth leading to promotions. Health, Dental and Vision Insurance Retirement Savings Plan Paid Time Off Yearly Clothing allowance of $150 after 90 days Yearly Boot allowance of $150 after 90 days Job Type & Location This is a Permanent position based out of Liverpool, NY. Application Deadline This position is anticipated to close on Oct 25, 2026. Workplace Type This is a fully onsite position in Liverpool,NY. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Power-Flo Technologies Syracuse is now hiring a Non-CDL Driver to make deliveries in our box trucks and flatbeds. Box truck and/or Flatbed experience required. This is a full-time opportunity. Monday - Friday. 7:30 AM - 4 PM. Benefits: • Health, Dental and Vision benefits, • Overtime Opportunities, • PTO Program, • Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) Salary Range: $16 - $19/hour Key Responsibilities : • Load, unload, prepare, inspect, and operate delivery vehicle, • Plan delivery route to maximize efficiency and productivity for the day, • Obey all traffic laws and parking regulations, • Safely and efficiently pick up and deliver orders, • Perform basic warehouse work to include, removing sold parts from stock, placing received parts on shelves, processing items for shipment, receiving, driving, organizing etc., • Pull and stage orders for shipment, • Organize Inventory, • Maintain a clean Driver's License to operate company vehicles Requirements : • Box truck or Flatbed experience required. No CDL required., • Current, valid, and clean NYS driver’s license (7 years' clean driving record) to operate company vehicles, • Ability to work in the warehouse, • Ability to obtain & maintain DOT certification, • Ability to follow processes, procedures, and policies, • Ability to work well both independently and on a team and be willing to learn, • Ability to communicate in verbal and written from with functional English skills, • Excellent organizational and time management skills, • Forklift experience a plus Physical Requirements :

PetSmart does Anything for Pets – JOIN OUR TEAM! Pet Trainer About Life at PetSmart Our associates are the heart of Team PetSmart. Together, we're building the best team in retail through our values-based culture, connection, and teamwork. Our goal is to create a culture where associates learn and grow together, thrive as effective teams, and challenge each other to be the best they can be. Benefits that benefit you • Paid Weekly, • Health & Wellness Benefits, • 401k Plan with company match, • Paid Time off for full-time associates, • Associate discounts, • Tuition Assistance, • Career pathing, • Development opportunities Job Summary PetSmart’s Pet Training Instructor is responsible for engaging with pet parents and their pets while providing positive experiences and upholding the company’s vision, mission, values, and strategy. They will actively seek out pets and pet parents to educate them on the benefits of pet training and will deliver pet training services in accordance with PetSmart’s curriculum. Essential Responsibilities Job responsibilities include, but are not limited to, the following and may vary depending on store characteristics and needs: • Responsible for pet parent experience and outcomes conducted over the telephone, in person or online, and responding to pet parent concerns., • Actively sell training classes in store, over the phone and online., • Educates pet parents about the benefits of our entire pet training curriculum., • Maintains all paperwork related to pet training., • Educates fellow associates and acts as the subject matter expert for their location on the benefits of pet training., • Schedules training classes as outlined by the Company expectations., • Responsible for creating a safe environment for the people and pets in their classes and surrounding areas of the store., • Ensures the pet training area and surrounding areas are clean and presentable., • Recognize associates for their contributions to selling pet training., • Responsible for taking immediate action when a sick/injured pet is identified in the store; transport to the vet as needed., • Recommends, informs and sells merchandise and services., • Assists and works in other departments as required. Other duties may be assigned., • Participates in our culture of Belonging and Recognition., • Follows all Company Policies and Procedures. Qualifications • 1-2 years of retail experience in a customer-focused environment., • Accredited in PetSmart Training Instructor Course, • Proficiency in computer applications., • Ability to react under pressure and maintain composure., • Flexibility in schedule, able to work evenings, weekends, and holidays as needed, • Strong organizational skills and attention to detail., • Strong written and verbal communication skills. Essential physical demands and work environment • Associate required to stand, walk, climb a ladder, and use hands to handle, feel, hold, write, etc. The associate frequently is required to reach with hands and arms: stoop, kneel, crouch, talk and hear. Specific vision abilities required by this job include depth perception. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Associate must frequently lift and/or move up to 50 pounds and occasionally team lift and/or move more than 100 pounds. Specific vision abilities required by this job include depth perception., • While performing this job, the associate is occasionally exposed to moving mechanical parts and a wet environment with an abundance of pet hair. The noise level is moderate in the work environment; however, associates may be exposed to high levels of noise at times. Exposure to live animals and their handling is common. Do what you love Join us for a chance to make a meaningful impact every day. Whether it's helping a customer choose their first fish, celebrating a pet's birthday, or seeing the smile on a pet parent’s face after a fresh groom—you'll create moments that matter. At PetSmart, we cherish diversity and the unique perspectives of our 50,000 associates, all united by a passion for pets. We’re delighted you’re interested in joining our pack and helping us in our commitment to doing Anything for Pets, and the people who love them. We're excited to hear your story and learn more about you! Apply Now! PetSmart is an Equal Opportunity Employer PetSmart provides an equal opportunity for all associates and job applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other legally protected characteristics. We offer reasonable accommodations to applicants with disabilities throughout our application process, upon request and as required by law. This listing is not an indication that the position is currently open or available. We are continually looking to build a strong network of talented candidates to join our organization and are always accepting applications. Feel free to contact your local PetSmart store to check on which roles they are actively hiring for. This job summary is intended to describe the general nature and level of work associates/leaders assigned to this job perform. It is not intended to include all duties and responsibilities. You will be provided with a copy of a job description for the actual position you are hired into. Exact rate of pay will be based on relevant experience level, training, skills or knowledge and store location. In no instance will PetSmart pay less than the local minimum wage. This position is also eligible for train pay which is based on a percent of training sales (which is 0% for Pet Training Instructor Trainees, 20% of training sales for Pet Training Instructor 2, 25% of training sales for Pet Training Instructor 3, and 30% of training sales for Area Pet Training Instructor), as well as benefits, as described at _. Applicants must be over the age of 18 (except in Montana or where otherwise required by local or state law) For applicants in our Waterloo, San Francisco, or Los Angeles locations: Pursuant to the Waterloo and San Francisco Fair Chance Ordinance, as well as the Los Angeles Fair Chance Initiative for Hiring, we will consider for employment, qualified applicants with arrest and conviction records in a manner consistent with the law.

Job DescriptionDescription: Job Summary: Feldmeier Equipment is seeking highly motivated individuals with a strong work ethic and machine operation experience to join our 1st shift production team! Work in a state-of-the-art facility that provides a rewarding full-time career, in an enjoyable, fast-paced environment. The ideal candida Feldmeier offers the opportunity to learn a skill and fabricate stainless steel parts & vessels for customers around the world. Requirements: Essential Functions of Position: • Set up machines (calibration, cleaning etc.) to start a production cycle., • Control and adjust machine settings such as speed, pressure, direction., • Troubleshoot issues that might occur with the machine during the shift., • Check finished parts to spot any machine-related mistakes or flaws., • Observe and follow company safety rules and regulations. Minimum Qualifications: • Detail orientated., • Strong ability to multitask., • Good work ethic, • Ability to work independently and be self-motivated., • Reliable Transportation Preferred Qualifications: • Machine Operation Experience in a Manufacturing setting., • Basic knowledge of hand tools., • Basic knowledge of metal cutting/welding., • Experience with CNC controls., • Ability to add, subtract, multiply, and divide using fractions, decimals etc., • Metal Forming/Polishing experience is a plus., • Ability to read and understand Blueprints is a plus. -Forklift certified -Manufacturing Experience Physical Requirements: · Ability to stand and/or walk for up to 8 hours per day and occasional lifting, carrying, and maneuvering up to 50 pounds. · Ability to climb ladders, stairs, and platforms for elevated work. · Walking, bending, squatting, kneeling, balancing, stooping, lying down inside or under vessel and twisting while performing required job tasks. · Being mindful of chemical safety and use proper PPE when required. Job Title: Machine Operator Reports To: Shop Supervisor Classification: non-exempt Pay Range: $19.00- $31.50

Job DescriptionDescription: Operate fabricating machinery and fabricate a variety of flat and irregular shaped parts for various product lines. MONDAY-THURSDAY 1pm-11:30pm Shifts Available ABOUT JAQUITH INDUSTRIES: Jaquith Industries is a family-owned manufacturing company committed to delivering high-quality products, exceptional customer service, and a safe, team-oriented work environment. We take pride in our craftsmanship, reliability, and the long-term relationships we build with our employees and customers. At Jaquith Industries, we believe our people are our greatest asset, and we are dedicated to providing opportunities for growth, stability, and success. We are looking for motivated individuals who value teamwork, dependability, and continuous improvement. If you're seeking a rewarding career with a company that values its employees and invests in their future, we'd love to hear from you. BENEFITS: Jaquith Industries offers a competitive benefits package, including: · Health Insurance - 75% Employer Covered · Life Insurance · 401(k) Retirement Plan · 401(k) Automatic 3% Match · 80 Hours of Paid Time Off (PTO) · 40 Hours of Paid Sick Time · 11 Paid Holidays per Year · Up to $700 Annual Reimbursement for Eligible Dental and Vision Expenses · Stable, Long-Term Employment Opportunities · Overtime is Available, but Not Required · Supportive Team Environment Join a company where your hard work is valued and your contributions make a difference every day ESSENTIAL JOB FUNCTIONS: • Operate various size and types of sheet metal fabricating machinery such as shears, press brakes, punch presses, etc., • Fabricate a variety of flat and irregular shaped parts for various product lines., • Remove burrs, sharp corners, etc. from processed parts., • Using hand truck, Lift truck, or overhead crane to move materials, parts, tools, etc. to and from storage, staging areas, or workstation., • Obtain first piece inspection., • Read and interpret measuring devices., • Perform daily lift truck inspections., • Follow quality control standards to ensure meeting quality and quantity requirements., • Make minor adjustments to machine settings and perform general equipment inspection., • Adhere to established safety rules and policies., • Notify Supervisor or Safety Director of any unsafe acts or practice stopped., • Meet quality and production standards., • Keep work area neat and orderly on a daily basis., • Keep Supervisor fully informed of any problems., • Perform other duties as assigned.Requirements:, • High school diploma or general education degree (GED) and 3 years work experience., • Possess and demonstrate positive mentoring and leadership qualities., • Good oral and written communication skills., • Participate in training events (ie; Lockout/Tagout; HazCom; and overhead crane training), • Treat all co-workers with dignity and respect., • Basic math skills., • Basic organizational skills., • Positive attitude towards work and work environment. EQUIPMENT LISTING (MACHINES, TOOLS & SOFTWARE): Will work with sheet metal, plastic and aluminum, stainless steel, copper, orders, parts and drawings, using a variety of tools, including shears, press brakes, punch presses, hand truck, Lift Truck, overhead crane, disc sanders, belt sanders, hand tools, micrometers and gages, and a variety of power tools and hand tools.

Job DescriptionDescription: Job Summary: Feldmeier Equipment is seeking highly motivated individuals with a strong work ethic and machine operation experience to join our 1st shift production team! Work in a state-of-the-art facility that provides a rewarding full-time career, in an enjoyable, fast-paced environment. Feldmeier offers the opportunity to learn a skill and fabricate stainless steel parts & vessels for customers around the world. Requirements: Essential Functions of Position: • Set up machines (calibration, cleaning etc.) to start a production cycle., • Control and adjust machine settings such as speed, pressure, direction., • Troubleshoot issues that might occur with the machine during the shift., • Check finished parts to spot any machine-related mistakes or flaws., • Observe and follow company safety rules and regulations. Minimum Qualifications: • Detail orientated., • Strong ability to multitask., • Good work ethic, • Ability to work independently and be self-motivated., • Reliable Transportation Preferred Qualifications: • Machine Operation Experience in a Manufacturing setting., • Basic knowledge of hand tools., • Basic knowledge of metal cutting/welding., • Experience with CNC controls., • Ability to add, subtract, multiply, and divide using fractions, decimals etc., • Metal Forming/Polishing experience is a plus., • Ability to read and understand Blueprints is a plus. Physical Requirements: · Ability to stand and/or walk for up to 8 hours per day and occasional lifting, carrying, and maneuvering up to 50 pounds. · Ability to climb ladders, stairs, and platforms for elevated work. · Walking, bending, squatting, kneeling, balancing, stooping, lying down inside or under vessel and twisting while performing required job tasks. Being mindful of chemical safety and use proper PPE when required. Job Title: Machine Operator Reports To: Shop Supervisor Classification: non-exempt Pay Range: $22.00- $31.50 Night Shift: 3:30pm-2am Shift Differential: $2

Job DescriptionScrew Machine Operator Hours: 2nd shift 4:00pm-2:00am Days: Monday- Thursday Pay: $16.50 per hour plus 10% shift differential = $18.15 per hour Must train on 1st shift until training is complete Monday-Thursday 5:00am-3:00pm $16.50 per hour Staffworks is seeking a reliable Screw Machine Operator to join their award-winning team! What's in it for you? - Shift Differential - Weekends Off - Temp to Hire Position - Will train person for position Screw Machine Operator Details: - Produces parts to required specifications by setting and operating conventional lathes, mills and other machinery. - Prepares machine for production including oiling the machine, starting and checking first part for possible defects. - Replaces tooling and makes minor adjustments under necessary supervision. - Ensures stock does not run out during production by inserting bar stock into spindles at end of machine. - Continuously cleans out chips during assigned shift. - Makes quality work using 3-pan system. - Checks parts after and during stock-up. - Makes out tickets that contain part numbers, machine number, operator number and date. - Maintains operational status of machine by monitoring condition of assigned machine - Report any needed repairs to the Maintenance Mechanic - Maintains work area and equipment in a clean and orderly fashion, abiding by company rules and safety regulations. - Performs all other duties as assigned. Screw Machine Operator Requirements: - High School diploma or GED, trade school certification a plus. - 1-3 years of prior Screw Machine operation experience. - Ability to read, write, and communicate in English. - General computer skills with the ability to use and learn SAP. - Ability to interpret geometric dimensions and tolerances (GD&T). - Basic mathematical knowledge to perform addition and subtraction. - Ability to utilize hand tools and have strong mechanical abilities. - Proficiency in blueprint reading. - Knowledge of and the ability to use micrometers and calipers. - Must demonstrate safe working habits, the ability to follow directions and work with minimal supervision. - Ability to work effectively in a team environment in a culturally diverse workplace. We are an Equal Opportunity Employer and celebrate diversity at all levels of our organization. How to Apply www.staffworkscny.com 315-455-9675 Apply now for immediate consideration! "INDITES"

Job Description “Davenport Machine Set-up/Repair Operator” Starting pay: $21.00-$23.00/hour DOE plus $.40 shift differential Hours: 3pm- 1130pm Staffworks is seeking a reliable Insert job title to join their award-winning team!What's in it for you? Temp to HireNY State Sick PayGreat CompanyPosition Title Details: Plan and perform the necessary operations to maintain, repair and rebuild Davenport Multi-Spindle Screw Machines Work closely with supervision and line coordinators Coordinate repairs with sub-contractors and spare parts distributors Position Title Qualifications: Extensive knowledge for Multi-Spindle Screw Machines, mechanical components, and machine shop practicesBasic math skills, including ability to use micrometers and other measuring devicesHigh School Diploma or GED Apply now!

Job DescriptionDescription: Operate fabricating machinery and fabricate a variety of flat and irregular shaped parts for various product lines. MONDAY-FRIDAY 6am-2:30pm or MONDAY-THURSDAY 1pm-11:30pm Shifts Available ABOUT JAQUITH INDUSTRIES: Jaquith Industries is a family-owned manufacturing company committed to delivering high-quality products, exceptional customer service, and a safe, team-oriented work environment. We take pride in our craftsmanship, reliability, and the long-term relationships we build with our employees and customers. At Jaquith Industries, we believe our people are our greatest asset, and we are dedicated to providing opportunities for growth, stability, and success. We are looking for motivated individuals who value teamwork, dependability, and continuous improvement. If you're seeking a rewarding career with a company that values its employees and invests in their future, we'd love to hear from you. BENEFITS: Jaquith Industries offers a competitive benefits package, including: · Health Insurance - 75% Employer Covered · Life Insurance · 401(k) Retirement Plan · 401(k) Automatic 3% Match · 80 Hours of Paid Time Off (PTO) · 40 Hours of Paid Sick Time · 11 Paid Holidays per Year · Up to $700 Annual Reimbursement for Eligible Dental and Vision Expenses · Stable, Long-Term Employment Opportunities · Overtime is Available, but Not Required · Supportive Team Environment Join a company where your hard work is valued and your contributions make a difference every day Department - 109 Closing, 109 CNC Saws ESSENTIAL JOB FUNCTIONS: • Operate various size and types of sheet metal fabricating machinery such as shears, press brakes, punch presses, etc., • Fabricate a variety of flat and irregular shaped parts for various product lines., • Remove burrs, sharp corners, etc. from processed parts., • Using hand truck, Lift truck, or overhead crane to move materials, parts, tools, etc. to and from storage, staging areas, or workstation., • Obtain first piece inspection., • Read and interpret measuring devices., • Perform daily lift truck inspections., • Follow quality control standards to ensure meeting quality and quantity requirements., • Make minor adjustments to machine settings and perform general equipment inspection., • Adhere to established safety rules and policies., • Notify Supervisor or Safety Director of any unsafe acts or practice stopped., • Meet quality and production standards., • Keep work area neat and orderly on a daily basis., • Keep Supervisor fully informed of any problems., • Perform other duties as assigned.Requirements:, • High school diploma or general education degree (GED) and 3 years work experience., • Possess and demonstrate positive mentoring and leadership qualities., • Good oral and written communication skills., • Participate in training events (ie; Lockout/Tagout; HazCom; and overhead crane training), • Treat all co-workers with dignity and respect., • Basic math skills., • Basic organizational skills., • Positive attitude towards work and work environment. EQUIPMENT LISTING (MACHINES, TOOLS & SOFTWARE): Will work with sheet metal, plastic and aluminum, stainless steel, copper, orders, parts and drawings, using a variety of tools, including shears, press brakes, punch presses, hand truck, Lift Truck, overhead crane, disc sanders, belt sanders, hand tools, micrometers and gages, and a variety of power tools and hand tools.

Job Description We are looking for dependable Machine Operators to join a growing manufacturing team. This is a great opportunity for someone with production or manufacturing experience, but extensive machine operating experience is not required. Training will be provided Pay: $20.00 per hour Available Shifts: • 1st Shift: 6:00 AM – 2:00 PM, • 2nd Shift: 2:15 PM – 10:15 PMResponsibilities, • Safely operate assigned production machinery and equipment, • Follow all safety and quality procedures, • Load raw materials or parts into machines, • Monitor machines during production, • Make basic machine adjustments as needed, • Inspect finished products for quality, • Identify obvious defects or production issues, • Properly label finished products, • Maintain basic production and quality records, • Keep machines and surrounding work areas clean and organized, • Return tools and equipment to designated locations, • Communicate machine, safety, or quality concerns to a supervisor, • Work closely with other team members to meet production goals, • Follow production schedules and adapt to changes when necessary, • Perform other production-related duties as assigned, • Work overtime when requiredQualifications, • Previous manufacturing, warehouse, or machine operating experience is helpful but not required, • Willingness to learn how to operate production equipment, • Ability to follow written and verbal instructions, • Basic mechanical aptitude, • Strong attention to safety and quality, • Dependable attendance and punctuality, • Ability to work effectively as part of a team, • Ability to work in a fast-paced manufacturing environmentPhysical Requirements, • Ability to stand and move throughout the shift, • Ability to bend, reach, push, and pull as required, • Ability to regularly lift up to 50 pounds, • Ability to safely work around manufacturing equipment

Job Description With over 60 years of experience, we pride ourselves on delivering top-tier service and being a trusted generator distributor. We are seeking a dedicated Shop and Facilities Technician to join our growing team! If you're passionate about hands-on work and enjoy contributing to a dynamic environment, we encourage you to apply! This position plays a key role in maintaining a clean, organized, and safe shop environment while ensuring our technicians have access to the tools and resources they need. The Shop Technician is also responsible for facility maintenance, vendor coordination, and providing backup support to the Parts Department as needed. Key Responsibilities: • Maintain an organized, clean, and safe shop and stockroom., • Safely handle shipping and receiving duties using a powered industrial truck., • Conduct regular facility audits and ensure a safe, healthy work environment., • Support Field Service Technicians with parts deliveries, oil and coolant replenishment, and used oil disposal in compliance with regulations., • Assist technicians on jobs as needed., • Coordinate with external vendors for building maintenance, housekeeping, and waste management., • Perform routine maintenance and repairs on facility and grounds., • Assist the Parts Department with orders, inventory management, and parts lookups., • Support emergency response efforts within and outside company territories as needed., • Cross-train to provide backup support for the Parts Coordinator position as needed., • Other duties as assigned. Preferred Experience: • High school diploma or equivalent., • Minimum 1-2 years of related experience; equivalent combinations of education and experience considered., • Valid driver’s license with the ability to obtain DOT medical certification., • OSHA 10 or OSHA 30 certification (as required by local regulations)., • Forklift certification (or ability to obtain)., • Strong integrity, urgency, and results-driven approach to work., • Ability to work flexible hours, including nights, weekends, and on-call shifts., • Comfortable working in varying weather conditions and environments., • Excellent communication and problem-solving skills., • Proficiency with computers; Microsoft Office experience is a plus., • Mechanical inclination preferred; knowledge of diesel and gas engines is beneficial., • Strong organizational skills and attention to detail. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin. The anticipated compensation range for this position is $23.00 to $26.00 hourly. Actual compensation may vary based on skills, experience, certifications, location, and other business-related factors. Kinsley Group offers a comprehensive benefits package that may include medical, dental, and vision insurance, company-paid life insurance, disability coverage, paid time off, paid holidays, 401(k) with company match, employee assistance programs, and other company-sponsored benefits. Compensation details: 23-26 Hourly Wage PI6ec03d892341-25405-41119862

Job Description Company Summary Oneida Air Systems, founded in 1993, is the market leader in the design and manufacturing of dust collection systems. Our hard work and innovation have produced the best dust collection systems and products which are made right here in Syracuse, NY, that improve the safety and health of the customer’s current environment. As a thriving and continually growing company, we are invested in our employees’ success, and we look for talented people who want to grow with us. We have a very collaborative culture and desire individuals that are dedicated, innovative, visionary, detail oriented, upbeat, team players, and love challenges. If the above characteristics align with your experience, background, and expectations of an employer, please apply to learn more about the current and future opportunities available to you at Oneida Air Systems. Job Description: Oneida Air Systems is looking for experienced shippers and material handlers with the desire to become part of an excellent organization. • Pull parts, pack for shipment, and verify items from pick ticket for outbound delivery., • Palletize & secure large freight shipments on 4,6 & 10-foot pallets., • Prepare and ship smaller orders to process via UPS, FedEx, and USPS., • Use of hand pallet jacks and electric pallet jacks to move material., • Assist inbound and outbound shipping vendors, ensure safety and company policies are followed., • Carry out tasks issued by Department Manager or designate., • Comply with all safety regulations and recommendations., • Reinforce and role model company values, including excellent customer service., • Perform other duties as assigned. Requirements: • Ability to appropriately and effectively communicate with co-workers, customers, and managers in verbal or written format., • Minimum 1-2 years of shipping or material handling experience; 3+ years of shipping or material handling experience preferred., • Ability to lift up to 50 lbs. repeatedly without assistance, and team lift to 100 lbs., • Willing and able to work OT as needed., • High level of attention to detail., • Enjoy and work well in a fast-paced team environment. Additional Information: • Job Type: Full-time, • Pay: $17.00 - $21.00 per hour depending on experience, • Shift availability: Day shift – 6 am – 2:30 pm Monday through Friday (required), occasional overtime available, • Work location: In person, • Benefits: 401(k) with company match, health, dental, vision, company provided life, AD&D, and long-term disability insurance, supplemental insurances available, EAP program, pet insurance and pet wellness programs, discount programs, vacation and sick time, 8 paid holidays per year, and monthly/annual bonus potential based on company performance. Please note that the posted pay range is a good faith estimate and may vary within the range based on qualifications such as experience and education level. It is Oneida Air Systems’ policy to provide equal employment opportunity to all qualified individuals. We are committed to employing a diverse workforce and all personnel actions taken are based on merit and business needs. We value all employees’ talents and support an environment that is inclusive and respectful. We are strongly committed to this policy and believe in the concept and spirit of the law. \nCompany Description Oneida Air Systems, founded in 1993, is the market leader in the design and manufacturing of dust collection systems. Our hard work and innovation have produced the best dust collection systems and products which are made right here in Syracuse, NY, that improve the safety and health of the customer’s current environment. Oneida Air Systems, founded in 1993, is the market leader in the design and manufacturing of dust collection systems. Our hard work and innovation have produced the best dust collection systems and products which are made right here in Syracuse, NY, that improve the safety and health of the customer’s current environment.

Job DescriptionJob Title: Wiring SpecialistRole SummaryJob Details Our client is currently seeking a Wiring Specialist. The core hours are 6:00am to 2:30pm. The hourly rate for this position is $25.18 per hour. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you’ll do: As a Panelboard Assembler Wiring Specialist you perform assembly, and wiring duties to all department wired solutions and panelboards to ensure Company productivity and performance metrics are met. Wire and solder connections are specified using care to maintain continuity and avoid damage to heat sensitive components and delicate parts. Work extensively from wiring diagrams, or engineering specifications on builds requiring so. Required to assemble terminal blocks, wire breakers, assemble wire harnesses, and more extensive wiring in products including D2L, EPL, D2D, EXD, ACE product lines, and other individual wired solutions. Determine proper type and size wire to be used with various amperages when not specified on drawings. Collaborate with Engineering and Quality personnel when required. Add panel sections, drill holes, or otherwise prepare panelboards for the mounting of various component parts in their proper sequence. Assembly work includes and is not limited to mounting plates or frames; assemble and wire starters, relays, transformers, switches, circuit breakers; assemble electrical details to housings; GFI and hot test GFI; affix operating shafts, bearing and indicating plates; fit and adjust outer operating controls as prescribed. Responsible for maintaining quality work in the preparation of assemblies. Maintain a clean, orderly and safe work area. Perform Total Productive Maintenance (TPM) activities such as minor maintenance that includes cleaning, inspection, minor lubrication and tightening loose bolts. Assist in the day-to-day maintenance of the M.R.S. (Material Replenishment System) and floor stock system as necessary and within established procedures. Document errors found in drawings, prints, production orders, or other paperwork used to produce customer orders, and recommend engineering changes and improvements. Help promote a team environment. Complete training as assigned. Qualifications:Basic (Required) Qualifications: Must have a high school diploma or GED from an accredited institution. A minimum of one (1) years of experience in manufacturing or production environment. Experience in wiring diagrams, schematics, and other wiring work Our company will not consider applicants for employment immigration sponsorship or support for this position. This means that the company will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc. No relocation benefit is offered for this position. Only candidates residing within the immediate area of Syracuse, NY (50 miles) will be considered for this position. Preferred Qualifications: Additional educational or vocational training We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

Job Description We are looking for a Manufacturing Associate – Assembler to join our Base Tube Assembly (BTA) team at Bluefors in Syracuse, NY. In this role, you will support the assembly and quality of Cryomech Base Tube Assemblies, contributing to the production of precision cryogenic components used in cutting-edge technologies. This is a great opportunity to build hands-on manufacturing skills while working in a collaborative, high-quality production environment that supports innovation across industries. Interested? Keep reading! Your tasks will include assembling Base Tube Assembly components in accordance with documented procedures and specifications to ensure consistency and quality. You will operate and maintain tooling and production equipment safely and effectively while ensuring all work meets established quality standards. You will complete and maintain accurate production and quality documentation and demonstrate a clear understanding of operational procedures while consistently meeting quality expectations. In addition, you will participate in continuous improvement efforts to enhance processes and performance, maintain a clean and organized work environment, and adhere to ISO quality system requirements. You may also perform additional responsibilities as assigned to support team and production goals. We are looking for a candidate with a high school diploma or GED, along with 1–3 years of manufacturing experience preferred, or an equivalent combination of education and experience. The ideal candidate will demonstrate strong attention to detail, a commitment to quality, and the ability to follow documented procedures and instructions. You should be comfortable working with tools and production equipment in a manufacturing environment and be able to maintain accuracy in both assembly work and documentation. Dependability, adaptability, and the ability to work both independently and as part of a team are essential, along with clear communication skills and a strong commitment to safety. We also appreciate candidates who bring a strong mechanical aptitude and a proactive approach to learning and continuous improvement. Experience working in a manufacturing setting with a focus on quality standards will help you stand out. A team-oriented mindset, along with the ability to stay organized and maintain a clean workspace, is highly valued. Candidates who align with our core values—such as attention to detail, teamwork, continuous learning, and safety—will thrive in this role. We offer you an interesting, challenging, and responsible position, along with the support of a highly skilled and growing organization. This is an excellent opportunity for your professional growth in a dynamic, enthusiastic, and collaborative team where we work together and support each other. We foster a multicultural work environment with room to grow, where you can use your potential and further develop your skills. We offer a generous benefits package including health, dental, vision, 401(k), long- and short-term disability, life insurance, training, tuition reimbursement, and Paid Time Off (PTO). Pay range: $19.23 – $24.03/hr. (DOE) Main Responsibilities include the following: Assemble BTA components in accordance with documented procedures and specifications Operate and maintain tooling and production equipment safely and effectively Ensure all work meets established quality standards and requirements Complete and maintain accurate production and quality documentation Participate in continuous improvement efforts Demonstrate understanding of operational procedures and meet quality expectations Maintain a clean, safe, and organized work environment Adhere to documented procedures and ISO quality system requirements Perform additional duties as assigned What We Expect from You High school diploma or general education degree (GED), or equivalent combination of education and experience 1–3 years of manufacturing experience preferred Ability to follow documented procedures and work instructions Strong attention to detail and commitment to quality Ability to work with tools and production equipment safely and effectively Basic documentation and record-keeping skills Good communication skills and ability to work collaboratively in a team environment Dependability and strong work ethic Willingness to learn and adapt in a manufacturing setting Commitment to safety and following established procedures Ability to align with company Leadership Principles and workplace competencies Excellent command of English, both written and spoken We Also Appreciate Mechanical aptitude or hands-on technical experience Experience working in a manufacturing or production environment Familiarity with quality standards or ISO-regulated environments A proactive attitude and willingness to take initiative Strong organizational skills and ability to maintain an efficient workspace Commitment to continuous learning and improvement A team-oriented mindset with a collaborative approach Flexibility and adaptability in a production environment A positive attitude and strong alignment with company values, including safety, diversity, and organizational effectiveness Physical Demands While performing the duties of this job, the employee is frequently required to stand, reach with arms and hands, and use hand and finger dexterity. The employee is occasionally required to walk, kneel, crouch, and talk and hear. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment This role operates in a manufacturing environment and interacts primarily with internal customers in a professional, courteous, and cooperative manner. Required personal protective equipment (PPE) must be worn as applicable. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and occasionally to humid conditions, fumes or airborne particles, heat, cold, risk of electrical shock, and vibration. The noise level in the work environment is usually moderately loud. This role does not offer sponsorship for work authorization. Bluefors Cryocooler Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration regardless of disability status, veteran status, or any other New York State or federally protected characteristic.

Job DescriptionDescription: • Perform preventive maintenance & service inspections on a variety of transport refrigeration units (TRU) & auxiliary power units (APU) & heater equipment, • Perform diagnostic, repair work on mobile refrigeration equipment, auxiliary power units & heater equipment, • Follow established technical & administrative processes, • Complete repair orders & parts usage forms, • Communicate effectively with supervisor, team members & customers, • Remain current on technical & regulation requirements, • Thermo King University Certi-Tech certification (to be completed within one year) and maintained, • EPA 608 & 609 certifications (to be completed within one year), • On Call duties rotation once skill level and training requirements have been metRequirements:, • Experience in the field of transport refrigeration equipment (Thermo King or Carrier Transicold preferred) a BIG Plus, • Skills to sufficiently install, diagnose and repair transport refrigeration, air conditioning and heating equipment, • Demonstrate technical knowledge of refrigeration systems, components, materials, methods & equipment to perform, prioritize and complete job assignments, • Own & maintain the proper hand tools to perform job functions, • High school diploma or equivalent, technical trade school a plus, • Proficient with computer operation/usage, • Valid driver’s license

Job Description About Stampede Ventures, Inc. Stampede Ventures provides a diverse portfolio of full-service construction, renovation, and civil work to meet the needs of Government and private sector customers. We leverage our experience to provide our customers with the best possible pricing and high-quality service on all projects we perform. Our senior management team has more than 100 years of facility maintenance, repair, renovation and construction experience, primarily serving the U.S. Government. About this position: HVAC Mechanic Location - Syracuse, NY The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job. Other duties may be assigned. To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the position. Wage/Salary Range: $24-45/per hr. Applicants will be notified via phone or email within ten (10) business days of submittal. Essential Duties & Responsibilities • Travel daily to perform needed preventive maintenance on the HVAC and other equipment as needed., • Complete PM checklists and close out the work order in Maximo. Uploading documents and photos as needed to document work performed., • Perform minor repairs on building equipment as needed during visits. (Faucets, flushometers, change light bulbs), • Work with subcontractors for services we do not have capability to offer., • Maintain excellent customer relations during job performance Interacting with all levels of management, • Carry out repair, maintenance, or installation of equipment for the generation, utilization, or distribution of commercial systems, • Perform inspection, maintenance, adjustment, and repair of equipment to ensure constant and reliable indoor air comfort, as well as laboratory or critical environments, • Handle and repair test equipment, complex centrifugal chillers, direct expansion and chilled water-based cooling systems, large air handlers, electronic and pneumatic direct digital control systems, and air distribution systems, • Operate, procure, introduce, and get back HFC, HCFC, and CFC refrigerants, • Perform repairs and maintenance of reach in, walk in, stand alone ice machines, central plan chillers, pumps, free standing A/C units, refrigerators, roof top cooling units, and guest rooms A/C units, • Maintain inventory of parts and supplies of air conditioning and refrigeration equipment, • Design an effective preventive maintenance program to ensure maintenance of equipment is scheduled and carried out regularly as at when due, • Carry out chemical test on cooling tower and chilled water loop as required, • Ensure proper air circulation on the air handler by balancing airflow, • Assess vendor specifications and proposals and give recommendations to the customer; supervise material purchase following customer’s ordering procedures, • Perform low voltage wiring; handle BAS system Direct Digital Controllers (DDC), • Diagnose and effect mechanical, plumbing, and electrical repairs to HVAC equipment, • Carry out regular periodic plumbing and maintenance tasks as needed Required (Minimum Necessary) Qualifications · Education Requirements: High school education or GED equivalent · Level of Experience Requirements: 5-10 years of experience maintaining and repairing HVAC equipment. • Must be able to pass an extensive background check, • Must have a valid driver’s license and transportation, • Should own the basic tools needed to perform maintenance on the equipment, • Must be able to pass drug screening, • EPA 608 Certification for refrigerant (Type 1 and Type 2). Knowledge, Skills, Abilities, and Other Characteristics • Knowledge of multiple types of HVAC systems (Mini-splits, Rooftop Units, Chillers-Air Cooled, etc), • Good mechanical/electrical/plumbing skills as related to HVAC equipment., • Ability to lift and carry weights up to 75 lbs., • Ability to work with little supervision., • Ability to travel daily within the Designated area. Our company has locations in 3 states with multiple locations, • Knowledge of organizational procedures and workflows – understanding how work moves through a company., • Basic knowledge of relevant technologies or tools – e.g., Microsoft 365, communication platforms, or industry‑standard software., • Knowledge of customer service practices – principles of providing quality service and managing inquiries professionally., • Knowledge of data privacy and confidentiality principles – awareness of proper handling of sensitive information., • Communication skills (written and verbal) – ability to convey information clearly and professionally., • Time management and prioritization – balancing multiple tasks and meeting deadlines., • Problem‑solving and critical thinking – analyzing issues and selecting appropriate solutions., • Interpersonal and teamwork skills – building rapport and collaborating effectively with others., • Attention to detail – producing accurate, error‑free work. Preferred • 10-15 years of experience maintaining and repairing HVAC equipment., • Experience with maintaining multiple locations., • EPA 608 Certification for refrigerant (Universal).., • Controls Knowledge a plus. Supervisory Responsibilities · This position will not have supervisory responsibilities. DOT Covered/Safety-Sensitive Role Requirements · This position is not subject to federal requirements regarding Department of Transportation “safety-sensitive” functions. Necessary Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this role. Employees must always maintain a constant state of mental alertness. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Work Environment The work environmental characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of the role. Employees must always maintain a constant state of situational awareness. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Technicians will report to the Project Manager daily for assignments unless scheduled for deployment to a job site. Additional Qualifying Factors As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results. If applicable to the contract, you must also obtain and maintain the appropriate clearance levels required and must also be able to obtain access to military installations. Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer. All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

Smurfit Westrock (NYSE:SW) is the go-to leader and partner of choice in sustainable packaging. We are dedicated to creating efficient and scalable paper and packaging solutions to help solve complex packaging challenges. Guided by our values of safety, loyalty, integrity and respect, we are committed to delivering meaningful value for shareholders, customers, employees and the communities where we operate. Job: Industrial Electrician Location: 100 Southern Drive, Camillus, NY 13031 Pay: $39.30 an hour Shift: 1st Shift (6 am - 3 pm) Overtime: Must be able to work daily and or weekend overtime. Union Plant We are searching for a skilled Industrial Electrician to maintain, troubleshoot, and repair electrical and mechanical industrial equipment in our corrugated packaging plant in Camillus, NY. The successful candidate will be qualified to troubleshoot and repair both electrical and mechanical components on large scale production machinery, participate in PMs, support continuous improvement initiatives, and adhere to all safety regulations. You will provide resolutions to mechanical and electrical problems on a wide variety of paper and packaging machinery to keep our plant running at peak performance. What We Offer: • A career with a Fortune 500 company where Sustainability, Safety and Inclusion are business drivers and foundational elements of the daily work., • Opportunities to advance and learn alongside accomplished leaders in the Corrugated Packaging industry. If you live for machine up time come, join our best-in-class maintenance team!, • Opportunities to advance and learn alongside accomplished leaders in the Corrugated Packaging industry., • An attractive rate of pay and top tier benefits, reflecting skills, competencies and potential. The rate for this role is up to $39.30 an hour., • You will work in a collaborative work environment where safety is our priority. How You Will Impact Smurfit Westrock: • Focus on maintaining equipment in working order through preventive maintenance and troubleshooting mechanical and electrical failures in a fast-paced environment., • Enforce plant safety regulations and encourage employees to become safety conscious., • Perform scheduled preventive maintenance on electrical equipment, including motors, motor control centers (MCCs), transformers, switches, and wiring., • Diagnose, troubleshoot, and repair electrical faults in complex machinery such as corrugators, printing presses, die cutters, and material handling systems., • Troubleshoot and maintain Programmable Logic Controllers (PLCs) (e.g., Allen-Bradley, Siemens) and Human-Machine Interfaces (HMIs)., • Install, maintain, and calibrate various sensors, transducers, and measuring instruments., • Ensure all electrical installations and repairs comply with the National Electrical Code (NEC), local codes, and company standards., • Strictly adhere to Lockout/Tagout (LOTO) procedures and other plant safety policies., • Maintain and repair high-voltage equipment and control systems., • Keep accurate records of all maintenance work performed, parts used, and system documentation., • Assist with the installation and commissioning of new production equipment and control systems., • Collaborate with mechanical, hydraulic, and pneumatic technicians to resolve complex operational issues., • Participate in root cause analysis of failures to implement corrective actions and improve machine reliability., • Provide support for mechanical maintenance tasks as needed to ensure production uptime including predictive and preventative maintenance. What You Need to Succeed: • High School Diploma or equivalent required; college degree or technical certification is a plus., • Minimum of 3-5 years of experience as an Industrial Electrician, preferably in a manufacturing environment (corrugated, paper, or heavy industry experience is a significant plus)., • Proven experience working with 480V three-phase systems and various control voltages., • Proficiency with electrical test equipment (e.g., multimeters, ammeters, megohmmeters)., • Expert knowledge of electrical schematics, blueprints, and wiring diagrams., • Strong aptitude for troubleshooting and programming PLCs and Variable Frequency Drives (VFDs)., • Valid Electrical license or the equivalent certification is highly valued. You must have equivalent experience to be considered for the role., • Willingness to work on both mechanical and electrical projects., • Excellent safety awareness and a commitment to safe work practices., • Strong mechanical aptitude and problem-solving skills., • Ability to work independently, manage time effectively, and handle emergency repairs under pressure., • Excellent communication skills Physical Requirements: • Ability to stand, walk, climb, and lift up to 50 lbs. regularly., • Ability to work in a loud, fast-paced industrial environment, which may include exposure to heat, dust, and chemicals., • This role is primarily off shift; however the successful candidate must be willing to work shifts, weekends, and on-call as required to support operations. The starting rate is $39.30 per hour, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 40 hours of paid vacation will be granted after 60 working day, and 10 days of paid holidays after 30 days, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at [1] _ #WorkWithSmurfitWestrock Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

⚡ Join Our Growing Team as a Maintenance Mechanic at Consolidated Precision Products & Superior Metals Manufacturing!⚡ $1,000 Sign-On-Bonus + 5% Quarterly Bonus If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! We are an investment casting foundry for the aerospace and defense industry creating parts for jet engines, wind and gas turbines, and other critical aerospace components. Performs all required duties relating to installing and troubleshooting plant production equipment. Why You'll Love Working With Us: • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: $25.00 - $40.00 per hour. Shift differentials for 2nd & 3rd shift. We also have overtime available., • Shifts: We currently have 2nd & 3rd shift available., • Sign-On Bonus: Receive a $1000 sign-on bonus when you join our team! CANDIDATES OFFERED EMPLOYMENT ARE REQUIRED TO PASS A PRE-EMPLOYMENT DRUG TEST & BACKGROUND STUDY PRIOR TO EMPLOYMENT What you'll be doing: • Responsible for ordering and maintaining supplies to support all maintenance functions., • Responsible for basic maintenance support for startup operations such as, lights, dust collectors, air filtration systems, etc., • Monitor machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine., • Dismantles defective machines and equipment and installs new or repaired parts., • Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic equipment, and repairs and replace Design, assemble and install electronic control systems for production machinery and associated automated equipment’s gauges, valves, pressure regulators, and related equipment., • Troubleshoot, maintain and repair machine level control systems, which utilize programmable logic controllers., • Perform preventive maintenance per schedule., • Communicate with operators pre- and post-repair., • Repairs and maintains physical structure of establishment., • Follow lock-out/tag out procedures., • Responsible for adherence to all safety policies, practices and procedures. Requirements: • Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; or related experience and/or training; or equivalent combination of education and experience., • Experienced Forklift drivers preferred., • Language skills: Ability to read, understand, and comprehend documents. Ability to speak effectively and interact with other team members, engineers, and leadership., • Mathematical Skills: Ability to add, subtract, multiply, and divide. Ability to use basic gages and measuring devices., • Reasoning Ability: Ability to deal with problems involving several concrete variables in standardized situations. Ability to carry out instructions in written, oral, and diagram form., • The ability to be reliable, work overtime as needed, and be committed to working at our Chittenango, NY facility. Working Conditions: • Frequently work near moving mechanical parts., • The physical effort applied in this job includes lifting, pulling, reaching, manipulating, carrying, pushing, or shoveling., • Manufacturing requires repetitive motion of hands, wrists, and arms. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. Superior Metals Manufacturing (SMM) is a Consolidated Precision Products (CPP) company. More information about our company can be found at: _ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. This is a non-management position This is a full time position Pay Range: $25-$40

Job Description HVAC Service Technician Central New York (Rochester to Utica) Competitive Pay + Overtime + On-Call Incentives Company Vehicle Provided Join a Growing Team of HVAC Professionals! We are seeking an experienced HVAC Service Technician to install, maintain, troubleshoot, and repair commercial HVAC and refrigeration equipment throughout Central New York. This is a field-based role offering strong earning potential, excellent benefits, ongoing training, and opportunities for career growth. If you enjoy solving complex mechanical problems, working independently, and providing exceptional customer service, we'd love to hear from you. What You'll Do Service, repair, and maintain commercial HVAC and refrigeration systems Troubleshoot mechanical, electrical, refrigeration, and control system issues Perform preventative maintenance, inspections, and equipment upgrades Read and interpret blueprints, schematics, and technical documentation Complete accurate service reports and documentation Order and manage parts needed for repairs and maintenance Maintain company vehicle, tools, and equipment Communicate professionally with customers on-site Identify additional service opportunities when appropriate Support and mentor apprentice technicians as needed Follow all company safety policies and procedures Participate in rotating on-call coverage What We're Looking For 3-5 years of commercial HVAC service experience Experience servicing commercial HVAC and refrigeration equipment Strong troubleshooting skills in mechanical, electrical, and control systems Experience working on rooftop HVAC units EPA Universal Certification Valid Driver's License Ability to read blueprints and electrical schematics Strong communication and customer service skills Ability to lift 50+ pounds Comfortable working outdoors, at heights, and in varying weather conditions Ability to work independently and manage multiple service calls Preferred Qualifications • HVAC Technical Degree or Trade School Certification, • Commercial refrigeration experience, • Experience working in hospitals, industrial facilities, and office buildingsWhy You'll Love Working Here Company vehicle and modern diagnostic equipment Comprehensive benefits package 401(k) with long-term retirement support Cost-of-living and performance-based wage increases Extensive paid training and professional development Paid academic advancement opportunities Structured on-call schedule (only once every 6 weeks) Receive 4 hours of additional pay while on-call, even if no calls come in Strong safety culture and career advancement opportunities Work Environment This position services commercial customers throughout Central New York, including hospitals, manufacturing facilities, office buildings, educational institutions, and other commercial properties. • Daily local travel throughout the territory, • Occasional overnight travel as needed, • Indoor and outdoor work environments, • Rooftop and elevated equipment access required, • Overtime and occasional weekend work availableApply Today! Take the next step in your HVAC career with a company that invests in its technicians through top-tier training, state-of-the-art tools, competitive compensation, and long-term growth opportunities. We are looking for skilled professionals ready to make an immediate impact. Job Type & Location This is a Permanent position based out of East Syracuse, NY. Pay and Benefits The pay range for this position is $25.00 - $45.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Permanent position based out of East Syracuse, NY. Application Deadline This position is anticipated to close on Oct 28, 2026. Workplace Type This is a fully onsite position in East Syracuse,NY. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

\n Flagstar Nursing is seeking a travel Vascular Sonographer for a travel job in Syracuse, New York. Job Description & Requirements\n \n • Specialty: Vascular Sonographer\n, • Discipline: Allied Health Professional\n, • Start Date: ASAP\n, • Duration: 13 weeks\n, • 40 hours per week\n, • Shift: 8 hours\n, • Employment Type: Travel\n \n \n FSN is seeking a skilled and compassionate Sonographer – Ultrasound/Vascular Technologist to join our team. The ideal candidate will perform high-quality diagnostic ultrasound and vascular imaging procedures while ensuring patient comfort, safety, and accurate results for physician interpretation. \n Key Responsibilities: \n \n • Perform a variety of ultrasound examinations, including abdominal, OB/GYN, small parts, and vascular studies (arterial & venous)\n, • Obtain high-quality diagnostic images in accordance with physician orders and departmental protocols\n, • Operate and maintain ultrasound equipment, ensuring optimal performance and image quality\n, • Prepare patients for procedures, explain exams, and address questions or concerns\n, • Analyze images to ensure completeness and diagnostic quality before submission\n, • Maintain accurate patient records and documentation in the hospital’s EHR system\n, • Collaborate with radiologists, physicians, and healthcare staff to ensure optimal patient outcomes\n, • Adhere to infection control, safety guidelines, and regulatory standards\n Qualifications:\n \n, • Associate’s or Bachelor’s degree in Diagnostic Medical Sonography or related field\n, • Current certification from ARDMS (American Registry for Diagnostic Medical Sonography) or equivalent\n, • Additional vascular credential (RVT) preferred \n, • Minimum of 2 years' experience working as an Ultrasound/Vascular Technologist in a hospital setting\n \n Shift & Schedule: \n \n • Day shift: 5x8 or 4x10\n \n Benefits & Perks: \n \n • Competitive weekly pay via direct deposit.\n, • Comprehensive medical, dental, and vision insurance options.\n, • Retirement savings plans and additional supplemental benefits.\n, • Paid sick leave in accordance with applicable laws.\n, • Reimbursement for licensure, certifications, travel, and other eligible expenses.\n, • Opportunities for ongoing professional development and specialized training.\n, • Dedicated support team committed to your success.\n, • Employee referral bonuses and various perks designed to enhance your work experience.\n \n FSN is an Equal Opportunity Employer (EEO) and welcome qualified candidates of all backgrounds, including protected veterans and individuals with disabilities, to apply. \n \n Flagstar Nursing Job ID #101. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Sonographer – Ultrasound/Vascular Technologist About Flagstar Nursing\n \n FSN is a nationwide healthcare staffing and workforce solutions company dedicated to connecting qualified professionals with meaningful opportunities across hospitals, schools, behavioral health programs, government agencies, long-term care facilities, and community-based organizations. Since 2016, Flagstar has built a reputation for reliability, responsiveness, and quality care by supporting both healthcare professionals and the clients they serve. \n We offer flexible career opportunities, including per diem, contract, travel, temporary-to-permanent, and direct hire placements across clinical, allied health, behavioral health, and administrative roles. Our team is committed to creating a supportive work environment where employees feel valued, empowered, and equipped for success. \n At FSN, we believe great staffing starts with great people. We focus on strong communication, compliance, ongoing support, and matching professionals with opportunities that align with their skills, goals, and lifestyle. \n Benefits\n \n • Weekly pay\n, • 401k retirement plan\n, • Vision benefits\n, • Medical benefits\n, • Dental benefits\n, • Sick pay\n, • Referral bonus\n, • License and certification reimbursement\n \n

Job DescriptionBenefits/Perks • Flexible Schedule, • Competitive Pay, • Career AdvancementJob SummaryWe are seeking a skilled Assembler to join our team. In this role, you will create complex components by aligning materials and connecting parts. The ideal candidate has the ability to read and follow schematics, technical knowledge, and excellent manual dexterity. Responsibilities • Read and understand complex manuals, drawings, and schematics, • Precisely measure components to ensure fit, • Modify components to meet required specifications, • Put parts together to create more complex pieces, • Maintain a high level of quality control, • Keep detailed records, • Perform routine maintenance tasks to keep equipment in working condition, • Report on any equipment issues or defective partsQualifications, • High school diploma or GED, • Certification or diploma from a technical school is preferred but not required, • Previous experience as an Assembler or in a similar role, • Ability to read and understand blueprints and schematics, • Ability to operate machinery and use hand tools, • Strong understanding of quality control principles, • Excellent manual dexterity and hand-eye coordination

✈️ Join the Superior Metals Manufacturing Team As A Summer 2027 Engineering Intern! ✈️ Location: Chittenango, NY Term: Summer 2027 (May – August) Pay: $22-$25/hr Job Type: Temporary Fulltime/Hourly (on-site) Are you a college student with a passion for engineering and a thirst for hands-on experience? Do you have a curious mind, a love for problem-solving, and the ability to think critically? If so, CPP-Superior Metals Manufacturing has the perfect internship for you! As a Summer Engineering Intern, you’ll play a key role in supporting the manufacturing of aerospace superalloys and work closely with our engineering team to improve our processes. You’ll collaborate with shop floor personnel, dive into data collection, help create clear and concise work instructions and contribute to the development of our cutting-edge processes. What You'll Do: • Work with Engineers: Assist with data collection, process trials, and developing new methods to improve operations., • Analyze & Document: Review and summarize test results, maintaining meticulous records for easy review., • Continuous Improvement: Support our drive for excellence by finding internal and external opportunities for process optimization., • Collaborate with Shop Floor Teams: Help create routings and process instructions, ensuring they are clear and up-to-date., • Technical Writing: Prepare reports and technical notes to document process improvements and solutions to challenges., • Critical Thinking: Use your problem-solving skills to assist with root cause analysis and process improvements. What We Need From You: • Education: Must be pursuing a Mechanical, Electrical (Automation), Metallurgical, Materials, or Chemical degree from an accredited program - with at least 2 years of coursework under your belt., • Skills: You know your way around Microsoft Office and are eager to learn., • Interpersonal Skills: You can communicate clearly and collaborate effectively with engineers and shop floor personnel., • Team-Oriented Mentality: You’re ready to work as part of a team, contributing your ideas and learning from others to achieve shared goals., • Physical Requirements: Ability to handle light lifting (up to 50 lbs) and stand or walk for about half of your workday., • Drive: You have an enthusiasm for engineering and a willingness to dive into real-world challenges. Perks of the Job: • Real-World Experience: Get hands-on experience in metallurgy and mechanical engineering, working directly with the best in the industry to solve real challenges., • Sky’s the Limit Growth: Not just an internship – it’s a chance to grow! Your ideas will make an impact as you help us innovate and improve manufacturing processes., • Collaboration & Mentorship: Work closely with experienced engineers who are invested in your development, and gain valuable insights that will shape your career., • Epic Networking Events: Get ready for unforgettable team-building activities, social mixers, and fun networking events that will help you make lasting connections while having a blast., • Cool Work Environment: Enjoy a great mix of shop floor action and a comfortable, climate-controlled office – no dull days here!, • Work-Life Balance: You’ll have the flexibility to enjoy your summer while gaining industry experience. Working Conditions: • Will be in areas with high heat and dust, but also will have a comfortable, well-lit, climate-controlled setting., • Some physical activity, including walking, standing, and occasional lifting. If you’re ready to take your engineering knowledge from the classroom to an aerospace parts manufacture, Superior Metals Manufacturing - CPP is the place for you! Apply today and start building your future with us! Learn More about Consolidated Precision Products: _ CPP-Superior Metals Manufacturing is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Superior Metals Manufacturing, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations. This is a non-management position This is an internship position Pay Range: $22-$25

Job DescriptionAssembler Full-Time | Manufacturing Environment Join a Team That Values Quality and Growth We are seeking a detail-oriented Assembler to join our production team. In this role, you'll assemble, test, and inspect electronic products in a clean, organized manufacturing environment. If you enjoy hands-on work, using tools, and being part of a supportive team, this could be a great opportunity for you. What You'll Do Assemble electronic products and subassemblies using hand tools, fixtures, tweezers, and screwdrivers Follow detailed work instructions to ensure quality and accuracy Perform visual inspections and identify defects during the assembly process Report quality concerns and support continuous improvement efforts Use computers to access work instructions and record production information Work closely with team members to meet production goals and schedules Follow all safety, quality, and environmental procedures What We're Looking For • Manufacturing or assembly experience preferred, • Strong mechanical aptitude and attention to detail, • Comfortable using hand tools and small assembly equipment, • Basic computer skills, • Ability to read and follow written instructions, • Team-oriented with strong communication skills, • Ability to lift up to 50 lbs. with assistancePreferred Qualifications, • High school diploma or GED, • Mechanical and/or electronic assembly experience, • Experience reading assembly diagrams or basic blueprints, • Familiarity with quality-focused manufacturing environmentsSchedule, • Full-Time, • Overtime available based on production needsBenefits 5% 401(k) Match Medical, Dental & Vision Insurance Mental Health & Critical Illness Coverage 11 Paid Holidays + 2 Floating Holidays Generous PTO Program (Approximately 3 Weeks in the First Year) Career Growth & Advancement Opportunities Work Environment • Clean, well-lit manufacturing facility, • Structured workstation environment with sitting and standing throughout the day, • Positive team atmosphere with music on the production floor, • Focus on employee engagement, safety, and long-term career developmentWhy Apply? This company is known for treating employees like family, offering excellent benefits, a positive culture, and opportunities for long-term growth. If you're looking for a stable career with a company that values its people, we'd love to hear from you! Job Type & Location This is a Contract position based out of North Syracuse, NY. Pay and Benefits The pay range for this position is $17.00 - $17.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract position based out of North Syracuse, NY. Application Deadline This position is anticipated to close on Oct 29, 2026. Workplace Type This is a fully onsite position in North Syracuse,NY. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description IMMEDIATLY HIRING FORKLIFT OPERATOR ROLE PAY $21/50/HR START ASAP! Responsibilities • Operate forklifts and other lift trucks in a constant state of alertness, following all material handling and safety requirements to move, distribute, ship, and receive parts and equipment., • Work safely at elevated heights up to 50 feet while handling materials and performing warehouse tasks., • Maintain a strong safety focus by applying knowledge of sling, hoist, and crane operations when moving materials., • Perform stocking duties to address and resolve complex warehouse or factory capacity issues., • Keep accurate records of all material transactions and conduct audits to ensure overall inventory levels remain correct., • Investigate and reconcile inventory discrepancies and ensure all department records are complete and accurate., • Use a computer and handheld RF scanner to track inventory movements and update system records in real time., • Complete regular cycle counts to maintain and verify inventory accuracy., • Support production systemdriven processes and activities by ensuring materials are available and correctly positioned for operations., • Follow written work instructions in English and adhere to all safety and operational procedures., • Handle materials using pallet jacks and other material handling tools as needed. Essential Skills • Ability to operate forklifts and other powered industrial vehicles safely, or willingness to learn and follow training., • Ability to work in a constant state of alertness and maintain a strong focus on safety., • Comfort working at elevated heights up to 50 feet., • Knowledge of or ability to learn sling, hoist, and crane operations to move materials safely., • Ability to use a computer and handheld RF scanner for inventory tracking., • Ability to read and understand English and follow written and verbal work instructions., • Ability to perform physical tasks including stooping, bending, twisting, turning, squatting, reaching, pushing, pulling, grabbing, and grasping., • Ability to safely lift up to 50 pounds on a regular basis., • Attention to detail and accuracy in recordkeeping and inventory control. Additional Skills & Qualifications • Previous experience with powered industrial vehicle (PIV) operation preferred but not required., • Prior manufacturing or warehouse experience preferred., • Experience using RF scanners, pallet jacks, and other material handling equipment is an asset., • Familiarity with inventory control processes such as cycle counting and transaction auditing is beneficial., • Comfort working in a fast-paced, production-oriented environment. Why Work Here? You join a stable, production-focused operation where safety, accuracy, and teamwork are highly valued. The role offers consistent daytime hours, allowing for predictable work-life balance during the week. You gain hands-on experience with modern material handling equipment and inventory systems, building skills that are highly transferable across logistics, manufacturing, and warehouse environments. You work alongside a supportive team that relies on clear processes and established production systems, giving you the structure and tools needed to succeed. Work Environment This position is based in a warehouse and production environment that uses modern material handling equipment, including forklifts, pallet jacks, RF scanners, and computer-based inventory systems. You will work on the 1st shift, Monday through Friday, from 6:00 a.m. to 2:30 p.m. The role involves working around powered industrial vehicles, stored materials at various heights, and active production areas. The environment requires frequent physical activity such as lifting up to 50 pounds, bending, twisting, and working at elevated heights up to 50 feet. You should expect to wear appropriate work attire and any required personal protective equipment suitable for a warehouse and material handling setting. Job Type & Location This is a Contract to Hire position based out of East Syracuse, NY. Pay and Benefits The pay range for this position is $21.50 - $21.50/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in East Syracuse,NY. Application Deadline This position is anticipated to close on Oct 23, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionTake Your Mechanical Skills on the Road! We are seeking experienced Road Forklift Mechanics / Field Service Technicians for an excellent direct hire opportunity with Thompson & Johnson Equipment, a well-established, family-owned company serving Upstate New York. If you have experience working on forklifts, diesel engines, heavy equipment, or automotive systems and enjoy troubleshooting mechanical problems independently, this could be a great long-term career opportunity. What You'll Do • Diagnose, troubleshoot, and repair forklifts and material handling equipment, including electric, gas, and diesel units., • Perform preventative maintenance and safety inspections., • Troubleshoot hydraulic, electrical, and mechanical systems., • Utilize computer-based diagnostic tools and manufacturer resources., • Maintain company-provided service van and parts inventory., • Communicate directly with customers regarding repairs and service recommendations., • Complete service documentation and work orders accurately., • Deliver quality repairs and exceptional customer service.What We're Looking For, • 3–4 years of mechanical training and/or hands-on experience in forklift repair, diesel mechanics, heavy equipment, automotive repair, or a related field., • Strong diagnostic and troubleshooting abilities., • Working knowledge of hydraulic, electrical, and mechanical systems., • Ability to work independently in a field service environment., • Strong communication and customer service skills., • Valid driver's license with a clean driving record., • Flexibility to work overtime when needed.Compensation & Benefits Competitive Pay: $29–$39 per hour • Hourly compensation — no flat-rate pay structure., • Overtime opportunities.Permanent, direct hire position., • Company-provided service van, tablet, phone, and uniforms., • Paid technical training and OEM certifications.Comprehensive Benefits Package, • Medical insurance starting as low as $5 per week., • FREE vision coverage., • Dental, life, short-term and long-term disability insurance options., • Additional supplemental insurance options., • 401(k) with a 50% company match on contributions up to 5%., • Generous paid time off and holidays, with additional benefits for veterans.Additional Employee Perks, • $500 annual tool allowance., • $600 annual well-being reimbursement., • $200 annual gym membership allowance., • $100 annual work boot allowance., • $100 annual company clothing allowance.Why Consider This Opportunity? Join a third-generation, family-owned organization that values its employees and provides long-term career stability. • Average employee tenure of more than 10 years., • Recognized as a Best Places to Work company for eight consecutive years., • Consistent Monday–Friday schedule with local travel., • Independent, road-based position with a variety of daily challenges., • Opportunities for advancement into lead technician, trainer, service management, and leadership roles.Work Environment & Hiring Requirements This position involves working at customer locations, both indoors and outdoors, in varying weather conditions. Physical responsibilities include lifting, climbing, and performing hands-on equipment repairs. Employment is subject to applicable pre-employment assessments, physical examinations, and drug screening. Apply Today! If you're an experienced mechanic looking for a stable, full-time, direct hire opportunity with competitive pay, excellent benefits, and long-term career growth, we want to hear from you! Apply today to learn more about this opportunity.

Job DescriptionDescription: The Electropolish Technician uses an electrolytic process to remove metal in an ionic solution by means of a electric potential. This process simultaneously deburrs, smooths, brightens, and removes surface contaminants of the base metal. Electropolishing removes impurities and other embedded contaminants which form during mechanical polishing. The result is a smooth, mirror-like finish which helps prevent contamination. Requirements: Essential Functions of Position: • Comply with all Feldmeier safety and Company policies and Occupational Health and Safety Regulations., • Set up and operate equipment for assigned jobs., • Wear proper PPE., • Understand metal finishing and electropolishing process., • Ability to read and understand drawings and work orders for specific requirements., • Ability to work in confined space to perform tasks., • Set-up of electropolishing equipment including cleaning of equipment, assembling fixtures, and connection of electrical cables, • Follow existing protocols for electropolishing of specific parts., • Visually inspects parts to ensure final finish meets requirements (ie: applicable Codes and standards, customer specifications, and Feldmeier Equipment SOPs) prior to final inspection performed by Quality Control, • Communicate concerns to management. Minimum Qualifications: • Detail oriented, • Ability to perform touch-ups using mechanical polishing with power tools Preferred Qualifications: • Previous work with Electropolish, • Previous work with passivation, • Previous work in plating, metal cleaning, • Previous work with rigging and overhead cranes Physical Requirements: • Ability to stand and/or walk for up to 8 hours per day., • Occasional lifting, carrying, and maneuvering up to 50 pounds., • Ability to climb ladders, stairs, and platforms for elevated work., • Walking, bending, squatting, kneeling, balancing, stooping, lie down inside or under vessel and twisting while performing required job tasks., • Comfortable working with Chemicals., • Being mindful of chemical safety and use proper PPE when required., • Willingness to work in confined spaces.

Job Description IMMEDIATLY HIRING FORKLIFT OPERATOR ROLE PAY $21.50/HR START ASAP! Responsibilities • Operate forklifts and other lift trucks in a constant state of alertness, following all material handling and safety requirements to move, distribute, ship, and receive parts and equipment., • Work safely at elevated heights up to 50 feet while handling materials and performing warehouse tasks., • Maintain a strong safety focus by applying knowledge of sling, hoist, and crane operations when moving materials., • Perform stocking duties to address and resolve complex warehouse or factory capacity issues., • Keep accurate records of all material transactions and conduct audits to ensure overall inventory levels remain correct., • Investigate and reconcile inventory discrepancies and ensure all department records are complete and accurate., • Use a computer and handheld RF scanner to track inventory movements and update system records in real time., • Complete regular cycle counts to maintain and verify inventory accuracy., • Support production systemdriven processes and activities by ensuring materials are available and correctly positioned for operations., • Follow written work instructions in English and adhere to all safety and operational procedures., • Handle materials using pallet jacks and other material handling tools as needed. Essential Skills • Ability to operate forklifts and other powered industrial vehicles safely, or willingness to learn and follow training., • Ability to work in a constant state of alertness and maintain a strong focus on safety., • Comfort working at elevated heights up to 50 feet., • Knowledge of or ability to learn sling, hoist, and crane operations to move materials safely., • Ability to use a computer and handheld RF scanner for inventory tracking., • Ability to read and understand English and follow written and verbal work instructions., • Ability to perform physical tasks including stooping, bending, twisting, turning, squatting, reaching, pushing, pulling, grabbing, and grasping., • Ability to safely lift up to 50 pounds on a regular basis., • Attention to detail and accuracy in recordkeeping and inventory control. Additional Skills & Qualifications • Previous experience with powered industrial vehicle (PIV) operation preferred but not required., • Prior manufacturing or warehouse experience preferred., • Experience using RF scanners, pallet jacks, and other material handling equipment is an asset., • Familiarity with inventory control processes such as cycle counting and transaction auditing is beneficial., • Comfort working in a fast-paced, production-oriented environment. Why Work Here? You join a stable, production-focused operation where safety, accuracy, and teamwork are highly valued. The role offers consistent daytime hours, allowing for predictable work-life balance during the week. You gain hands-on experience with modern material handling equipment and inventory systems, building skills that are highly transferable across logistics, manufacturing, and warehouse environments. You work alongside a supportive team that relies on clear processes and established production systems, giving you the structure and tools needed to succeed. Work Environment This position is based in a warehouse and production environment that uses modern material handling equipment, including forklifts, pallet jacks, RF scanners, and computer-based inventory systems. You will work on the 1st shift, Monday through Friday, from 6:00 a.m. to 2:30 p.m. The role involves working around powered industrial vehicles, stored materials at various heights, and active production areas. The environment requires frequent physical activity such as lifting up to 50 pounds, bending, twisting, and working at elevated heights up to 50 feet. You should expect to wear appropriate work attire and any required personal protective equipment suitable for a warehouse and material handling setting. Job Type & Location This is a Contract to Hire position based out of East Syracuse, NY. Pay and Benefits The pay range for this position is $21.50 - $21.50/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract to Hire position based out of East Syracuse, NY. Application Deadline This position is anticipated to close on Oct 29, 2026. Workplace Type This is a fully onsite position in East Syracuse,NY. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionJob Description ABOUT THE JOB You were born to be the boss. We know. You get up in the morning and you make sure everyone else in the house is doing what they need to do. Then you go to work and you make sure that everyone there is doing what they need to do, even your boss. You just do that because you've always done it. Well maybe it's time you moved up. You want to be the boss? Well now's your chance - Domino's Pizza is hiring bosses - more specifically assistant managers. It's a tough job, one that needs a natural like you. Of course, you'll need some skills - judgment, math and the ability to multitask. You'll be working for a company that's fun and flexible. Not to mention, it's work experience you're going to use for a long time to come. You've had our pizza delivered to you, now help us be the best in pizza delivery. Go on, boss, show us what you've got. Apply now! JOB REQUIREMENTS AND DUTIES You are responsible for everything that happens during your shift. This includes all cost controls, inventory control, cash control and Customer relations. You must set the example. You must follow ALL policy and procedures 100% of the time and expect the same from your crew. In addition: Staffing, Paperwork, Cost Controls, Cash control, Food management, Work to a Schedule, Perfect Image and adherence to standards, Great Customer Service, Attendance & punctuality, Transportation to/from work, Store cleanliness, Marketing, Profitability. ADVANCEMENT Many of our team members began their careers as delivery drivers and today are successful Domino's franchise owners. From assistant manager to general manager, general manager to franchisee or Manager Corporate Operations, our stores offer a world of opportunity. DIVERSITY Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential. SUMMARY STATEMENT We take pride in our team members and our team members take pride in Domino's Pizza! Being the best pizza delivery company in the world requires exceptional team members working together. At Domino's Pizza, our people come first! General Job Duties For All Store Team Members · Operate all equipment. · Stock ingredients from delivery area to storage, work area, walk-in cooler. · Prepare product. · Receive and process telephone orders. · Take inventory and complete associated paperwork. · Clean equipment and facility approximately daily. Training Orientation and training provided on the job. Communication Skills · Ability to comprehend and give correct written instructions. · Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills · Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). · Must be able to make correct monetary change. · Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. · Ability to enter orders using a computer keyboard or touch screen. · Navigational skills to read a map, locate addresses within designated delivery area. · Must navigate adverse terrain including multi-story buildings, private homes, and other delivery sites while carrying product. Work Conditions EXPOSURE TO · Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. · In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. · Sudden changes in temperature in work area and while outside. · Fumes from food odors. · Exposure to cornmeal dust. · Cramped quarters including walk-in cooler. · Hot surfaces/tools from oven up to 500 degrees or higher. · Sharp edges and moving mechanical parts. · Varying and sometimes adverse weather conditions when delivering product, driving and couponing. SENSING · Talking and hearing on telephone. Near and mid-range vision for most in-store tasks. · Depth perception. · Ability to differentiate between hot and cold surfaces. · Far vision and night vision for driving. TEMPERAMENTS The ability to direct activities, perform repetitive tasks, work alone and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgements and decisions. Additional Information PHYSICAL REQUIREMENTS, including, but not limited to the following: Standing Most tasks are performed from a standing position. Walking surfaces include ceramic tile "bricks" with linoleum in some food process areas. Height of work surfaces is between 36" and 48". Walking For short distances for short durations Delivery personnel must travel between the store and delivery vehicle and from the delivery vehicle to the customer's location. Sitting Paperwork is normally completed in an office at a desk or table Lifting Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3' x 1.5'. Cases are usually lifted from floor and stacked onto shelves up to 72" high. Carrying Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried from the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. During delivery, carry pizzas and beverages while performing "walking" and "climbing" duties. Pushing To move trays which are placed on dollies. A stack of trays on a dolly is approximately 24" - 30" and requires a force of up to 7.5 pounds to push. Trays may also be pulled. Climbing Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. During delivery of product, navigation of five or more flights of stairs may be required.Stooping/Bending Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their knees while standing at this station. Duration of this position is approximately 30 - 45 seconds at one time, repeated continuously during the day. Forward bending is also present at the front counter and when stocking ingredients. Crouching/Squatting Performed occasionally to stock shelves and to clean low areas. Reaching Reaching is performed continuously; up, down and forward. Workers reach above 72" occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Driving Deliver pizzas within a designated delivery area. A Team Member may make several deliveries per shift. Machines, Tools, Equipment, Work Aids Team Members may be required to utilize pencils/pens, computers, telephones, calculators, TDD equipment, pizza cutter and pizza peel. Driving Specific Job Duties Deliver product by car and then to door of customer. Deliver flyers and door hangers. Requires Valid driver's license with safe driving record meeting company standards. Access to insured vehicle which can be used for delivery.

Who are we? At Scalian, we are a leading multinational engineering consulting firm with 6000 specialists and over 30 years of experience. We are specialized in Digital Systems (IT & Software and Systems Engineering) and Industrial Performance (Quality Assurance, Supply Chain, and Project Management). Our expertise serves various technological sectors such as the aerospace, defense, rail, and energy industries while providing distinctive support to their development and operations. Are you an experienced Supply Chain Quality Manager (SCQM) based out of Syracuse? If your answer is yes, it’s your lucky day as we are looking for a dynamic and talented person to join our team in the US! What will your role be? Scalian is seeking a Supply Chain Quality Manager (SCQM) with a strong foundation in supply chain operations, quality management systems, and supplier performance recovery. In this role, you will take full ownership of quality performance across critical suppliers, driving corrective actions, recovery plans, and continuous improvement initiatives to ensure quality and compliance throughout the supply chain. Your primary responsibility will be to mitigate supplier-related quality issues, manage quality recovery plans, and collaborate with internal stakeholders and external partners to ensure consistent delivery of conforming parts, materials, or services. Activities: • Lead quality recovery efforts for underperforming suppliers by managing root cause investigations, containment actions, and long-term corrective action plans, • Respond quickly and effectively to supplier quality crises to minimize supply chain disruptions and ensure continuity of supply, • Monitor supplier quality performance using key indicators such as PPM, non-conformance reports (NCRs), audit findings, and first article inspection (FAI) results, • Initiate and manage improvement or escalation plans based on supplier performance data and trends, • Collaborate cross-functionally with procurement, engineering, manufacturing, and internal quality teams to align on quality expectations and drive consistent standards, • Facilitate structured problem-solving activities such as 8D reports, 5 Why analysis, and root cause workshops with suppliers, • Ensure suppliers comply with all relevant regulatory, contractual, and quality management system standards, • Track and report progress of supplier recovery activities, ensuring clear communication with internal stakeholders and customers, • Develop and maintain supplier quality scorecards, using data to identify trends and drive continuous improvement initiatives What skills and qualifications are we looking for? • Bachelor’s degree in Supply Chain, Quality, Engineering, or related field, • 3–5 years of experience in supplier quality management, supplier development, or supply chain operations, • Proven experience managing supplier corrective actions and driving recovery plans, • Strong understanding of quality standards, quality tools (8D, FMEA, control plans), and regulatory compliance, • Familiarity with supply chain management systems (SAP preferred) and strong Excel/data analysis skills, • Excellent interpersonal and communication skills; ability to influence cross-functional teams and external partners, • Strong analytical mindset with a proactive and solution-oriented approach, • Ability to manage multiple priorities under pressure and deliver measurable quality outcomes Why join us? • To acquire experience in different critical industries and projects while working for the same company;, • To have a competitive salary and a great benefits package, • To access trainings that focus on expanding your knowledge while staying up to date with cutting edge technologies and best practices;, • To have a clear career development plan that suits your goals;, • To have the possibility of working abroad through our mobility program thanks to our international presence;, • To join a dynamic, specialized and fast-growing group where communication is key and where every team member is valued., • To be part of a team where having fun is essential.

Materials Expediter – Manufacturing Syracuse, NY | Fully Onsite | Contract Opportunity Compensation: $27-$33/hour depending on experience Our client, a global technology manufacturer serving the medical and advanced industrial markets, is seeking a Materials Expediter to support its purchasing and manufacturing operations in Syracuse, NY. This is an excellent opportunity for an organized, responsive supply-chain professional who excels at following up with suppliers, tracking critical materials, resolving delivery problems, and keeping internal teams informed. The position is expected to continue through March of 2027, with the possibility of extension or permanent employment based on performance and business needs. Extension or conversion is not guaranteed. What You’ll Do • Monitor open purchase orders daily and identify late or at-risk materials., • Communicate with suppliers to confirm commitments and obtain updated delivery dates., • Expedite critical components to support production schedules and priority projects., • Resolve issues involving shortages, delayed shipments, documentation, logistics, and supplier responsiveness., • Maintain accurate delivery dates, acknowledgements, tracking details, and order statuses within the ERP system., • Provide Purchasing, Planning, and Operations with accurate, real-time information about material availability., • Communicate material risks, root causes, recovery plans, and mitigation steps to internal stakeholders., • Coordinate with Planning, Operations, Quality, Engineering, and Purchasing to address supply interruptions., • Help resolve quality holds, documentation delays, and other issues preventing materials from reaching production., • Identify opportunities to improve expediting workflows, supplier communication, and ERP data accuracy. What We’re Looking For • Experience in supply chain, purchasing, expediting, production control, material coordination, or a related function., • Previous experience supporting a manufacturing environment is strongly preferred., • Familiarity with ERP or MRP systems such as Oracle, SAP, Microsoft Dynamics, or a comparable platform., • Strong supplier communication and follow-through., • Ability to clearly communicate urgent parts, supplier commitments, material risks, and delivery changes., • Excellent organization and attention to detail., • Ability to manage multiple priorities in a fast-paced, deadline-driven environment., • Strong problem-solving and analytical skills., • Professional written and verbal communication abilities., • Negotiation experience is not required. Additional Details • Fully onsite in Syracuse, NY, • Preferred schedule is 7:00 a.m.–4:00 p.m., Monday–Friday., • Expected schedule of 40 hours per week., • Temporary assignment expected to continue through March of 2027., • Potential extension or permanent opportunity may be available depending on performance and business needs, but is not guaranteed., • No travel required. To apply for this role, please submit your resume to cnyjobs@hiresapphire.com for immediate consideration. Sapphire Recruitment is an EOE

TERRITORY SALES MANAGER Outside Sales | John Deere Construction & Forestry Equipment 📍 Location: Syracuse, NY 💼 Job Type: Full Time | Salaried-Exempt | Monday–Friday 💲 Compensation: $40k Annual Base + Commission (high earning potential = $100k+) 💰 Compensation & Perks • Competitive Pay, • Generous Paid Time Off + 7 Paid Holidays, • Paid Training & Recognition Programs, • 401(k) with Company Match, • Comprehensive Health & Wellness Benefits, • Branded Apparel, • Fantastic Work-Life Balance, • Supportive, Friendly Team Environment Own Your Territory. Build Relationships. Earn Big. Are you a driven, relationship-focused sales professional ready to take full ownership of a high-impact territory? Do you thrive in consultative, big-ticket sales and want to represent one of the most trusted brands in the world? Five Star Equipment is hiring a Territory Sales Manager for the Williamsport market, responsible for growing sales, rentals, and long-term customer partnerships across the region. This is a high-visibility role with strong earning potential, autonomy, and the backing of an industry-leading John Deere dealership. Why Syracuse? Syracuse offers an attractive place to live due to its highly affordable cost of living (roughly 28% lower than the state average), a recovering job market with growing tech and healthcare sectors, and a high quality of life featuring 4-season outdoor recreation. It is known for its friendly community and extensive park systems. 📌About Five Star Equipment Five Star Equipment is the John Deere Construction & Forestry Dealer for Northern Pennsylvania and New York State, operating 7 locations across 57 counties. We provide premium equipment, parts, and service solutions backed by knowledgeable professionals who are committed to customer success. Locations include: • Pennsylvania: Williamsport, Dunmore, Waterford, • New York: Kirkwood, Rochester, Syracuse, Orchard Park ✅ What You’ll Do As a Territory Sales Manager, you are the face of Five Star Equipment in your region. You will: • Serve as the primary point of contact for assigned customers, • Build strong, long-term relationships through regular on-site visits, • Sell new & used John Deere equipment, rentals, parts, and service solutions, • Provide consultative recommendations based on customer applications and needs, • Demonstrate equipment and support technical presentations, • Grow market share and meet or exceed sales, revenue, and gross margin targets, • Promote allied services such as preventative maintenance and repair programs, • Manage leads, call activity, and pipeline through the company CRM, • Monitor competitor activity and market trends, • Represent the company with professionalism, integrity, and enthusiasm ✅ What We’re Looking For • 3–5 years of successful outside sales experience (preferred), • 3–5 years in construction, industrial, or heavy equipment sales or rental (preferred), • Proven ability to grow sales, market share, and customer relationships, • Strong communication, negotiation, and consultative selling skills, • Comfortable operating and demonstrating heavy equipment, • Proficient with CRM systems, Microsoft Office, and digital tools, • Ability to travel within the territory and work flexible hours, • Valid driver’s license with a clean driving record Ready to Take the Lead? If you’re motivated by results, energized by customer relationships, and ready to build a lucrative career representing John Deere and Five Star Equipment, we want to hear from you. Apply today and take ownership of your territory in Williamsport. Grow Your Career with Five Star Equipment If you are a motivated, customer-focused professional ready to make an impact, this is your chance to represent one of the most trusted brands in the industry—John Deere. 📩 Apply today and join a winning team where your success is unlimited. Go to https://fivestarequipment.com/careers/

The Opportunity: The Smurfit Westrock Solvay Mill has an opportunity for an Electrical Engineer to join the team as a project manager overseeing multiple capital projects as the company continues it’s investment in our core business to support the mills client groups. Job Duties: • Manage multiple capital projects (primarily electrical, instrumentation and/or controls), including design, purchasing, contract and construction management, financial and documentation, • Project development within a structured environment on such things as Front End Loading, • Provide E&I project engineering support to the mechanical project engineers on their projects, • Work with Purchasing Dept. to identify all project materials and equipment for project completion, • Assist in the attainment of general mill goals by serving on special teams or supplying teams with necessary technical support, • Responsible for coordinating engineering and project activities while interacting with Maintenance and Operations, • Supply technical assistance for electrical equipment failure analysis and preservation on existing mill equipment, • Prepare, review and update mill specifications and review management of change proposals, • Provide E&I expertise on maintenance work orders as needed Requirements: Bachelor’s degree in electrical engineering, electrical engineering technology or related field and 5 years of experience in job offered or related occupation. Position requires experience in the following: • Process design, power distribution, PLC / DCS and variable speed drives., • Capital project development, execution, and installation/commissioning., • Troubleshooting plant electrical equipment and systems., • Supporting plant maintenance team on preventive maintenance activities, including equipment obsolescence planning and spare parts procurement strategy., • Pulp and Paper experience a plus. What we offer: • Corporate culture based on integrity, respect, accountability and excellence, • Comprehensive training with numerous learning and development opportunities, • An attractive salary reflecting skills, competencies and potential, • A career with a global packaging company where Sustainability, Safety and Inclusion are business drivers and foundational elements of the daily work. The salary range for this position is $117,750 - $196,250. The benefits for this role include a bonus plan, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 15 days of paid vacation, and 11 days of paid holidays, subject to annual change. Your pay will be based on factors such as your skills, experience, and education.

Branch Manager – Syracuse Are you ready to take charge, keep operations running smoothly, and deliver outstanding service supporting agricultural and construction equipment dealers? JS Woodhouse, a division of Hayward Distributing, is hiring a Branch Manager for our Syracuse location. In this role, you will combine day to day operational leadership with inside sales support, using your equipment knowledge to discuss product options, and help drive branch growth. You will support dealers directly, ensure every order and inquiry is handled accurately and efficiently, and take ownership of processes as challenges arise. Your contributions will make a real impact on both customers and the overall success of the branch. If you are organized, proactive, and bring strong agricultural and construction equipment knowledge, this is your opportunity to shine. Founded in 1947, Hayward Distributing is a stable company with a proven track record of success. We are a multi-state wholesale distributor of top lawn and garden and engine brands, including Honda engines, Bobcat mowers, and Ego. You will work closely with brands such as Westfield, Demco, and Worksaver. In addition to these brands, the Syracuse location houses our Sno Way snow removal line, including plows and spreaders. Your responsibilities include but are not limited to: • Answering inbound phone calls, primarily from dealers, • Discussing equipment needs and recommending product solutions, • Supporting dealer sales efforts through product knowledge and order guidance, • Solving customers’ tough problems and keeping them happy, • Answering technical questions about ag and construction equipment, • Ensuring orders are processed in a timely manner each day, • Entering complex equipment orders accurately, • Looking up service part numbers on illustrated parts diagrams, • Coordinating dealer orders and shipments as well as inbound product from vendors and other branches, • Communicating with customers in a professional manner via email and phone You will need: • Working knowledge of agricultural and construction equipment, • Comfort discussing equipment features, applications, and options with dealers, • Strong verbal and written communication skills, • Strong customer service and inside sales orientation, • Sense of urgency and an action oriented mindset, • An energetic, positive, and proactive attitude, • Sensitivity to the needs of our customers, • Ability to manage competing priorities and tasks, • Desire to be part of a fast paced continual improvement process, • Knowledge of order desk functions including order entry, pricing, and shipping, • Ability to toggle between multiple software applications and browser windows at one time What sets Hayward apart from other companies? • Our employees stay with us because they enjoy their work and our culture., • Hayward is a family company that has built a strong reputation in the industry by treating employees and customers fairly., • Hayward is an 80-person company with the sophistication and support necessary to let you do your job without the large company bureaucracy that keeps you from doing it., • We care about our employees and offer benefits that include health insurance, immediately vested 401(k) matches, 14 days PTO initially with increases with tenure, holidays, and highly competitive compensation packages We are not accepting unsolicited resumes or inquiries from third-party recruiters.

Job Description Do you love cars? Looking for a career not just a job? We will train you! United Radio is Central New York’s premier upfitter of emergency, construction and commercial vehicles. As an Upfit Technician, you will be installing/removing various types of emergency equipment; (lights, land mobile radios, sirens, prisoner partitions, weapon mounts, consoles, controllers, radar equipment, camera/DVR systems, push bumpers, etc.) . Job Requirements: Working knowledge of automobile electronics (12 Volt systems) and proficiency using basic hand and power tools. • Disassembling & reassembling vehicle’s exterior body parts & interior panels, • Properly mounting & securing components to vehicles, • Routing wires and cabling into vehicles, • Splicing wires and/or soldering connections to equipment & components, • Terminating connections on radios, LED lights, sirens, radar components, and electrical components, • Troubleshooting, diagnosing and/or replacing electrical components, • Documenting all work completed on work orders accurately, • Maintaining a clean, organized and safe working area, • controllers, light bar programming, radar systems, in-car camera systems, mobile radio installations, troubleshooting ability, etc Able to: Communicate & work with other employees to execute efficient and quality installations that meet company standards. Provide direct customer service as needed, perform diagnostics/troubleshoot and make repairs to equipment. • Work inside small areas like vehicle trunks, underneath cars, in engine compartments, underneath dashboards., • Must be able to lift, squat, kneel, stoop, bend, lay down, twist, climb, stand, sit, etc., • Assemble small and large items: brackets, partitions, light bars, push bumpers, cargo boxes, vehicle parts, fasteners, wires, loom, clamps, cable ties, etc. using both hands., • Be in overall good physical health and have full motion/use of hands, fingers, arms, legs, feet, shoulders, elbows, neck, etc. to fit into tight spaces and inspect/install wiring and products inside tight compartments, under, in and around the vehicle., • Must be able to work above, in, on and under vehicles., • Have attention to detail and a great work ethic. Basic automotive (12- Volt ) electrical knowledge along with general automotive experience is preferred but not required as well as working or advanced knowledge of current emergency vehicle lighting systems, sirens. Job Type: Full-time Must be able to pass a criminal background check, drug test and have a clean driver’s record. Our shop is fully climate controlled during the entire year. We hold events like monthly employee breakfasts, lunches and other activities to make the workdays fun. Pay: $21.00 -$35.00 per hour Pay range dependent on experience. Expected hours: 40 per week, Monday through Friday 8:00am-5:00pm Benefits: • 401(k) matching, • Dental insurance, • Health insurance, • Health insurance contribution, • Paid time off, • Bonus opportunities, • Employee-focused culture, • Technical and non-technical training, • No required overtime, • On-Job training

HCLTech is looking for a highly talented and self- motivated HVAC Test Engineer to join it in advancing the technological world through innovation and creativity. Job Title: HVAC Test Engineer Job ID : 164809 Position Type: Full-time with HCLTech Location: Syracuse,NY Role/Responsibilities: • Work with lab personnel and suppliers to ensure successful completion of test plans and ECS unit builds, • Procure parts and equipment required for units builds, • Submit necessary work orders to build & modify units at Client model shop, • Prioritize completion of Work orders, • Create test plan for units to be tested, • Coordinate with all necessary departments for testing units in field (Digital, software, hardware etc), • Test units in psychometric room to ensure no installation issues, • Identify Client's Factory authorized distributors/dealers across the United States for installation, • Roll out NDA’s, train the distributor & dealerships for installation of the equipment, • Obtain necessary permits to install units in the field in various states, • Present Field trial readiness plan to Client stakeholders to get necessary approvals, • Ensure all objectives of the field trial are met, • Troubleshoot HVAC equipment, • Identify the issues & report the root cause & corrective actions, • Any other work that would be beneficial for the team & Client, • Progress reports / Documentation:, • Update, develop and implement standard work practices for overall field trial process, • Accurately report and act on any risk identified or notified, • Provide weekly to daily progress reports – depends on progress, risks, needs, etc. associated to the project (field units installation), • Provide weekly data analysis reports and findings Pay and Benefits Pay Range Minimum: $34.38 per hour Pay Range Maximum: $42.00 per hour HCL is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to secure@hcltech.com for investigation. Compensation and Benefits A candidate’s pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year. How You’ll Grow At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

Job Summary Oversees the general maintenance repairs, apartment make ready execution, preventive maintenance, and overall property condition of an apartment community with over 300 units. Primary duties include supervising the daily operations at the property in the areas of landscaping, carpentry, painting, fencing and roofing repairs, plumbing, light electrical as well as the performance of all routine and preventative maintenance required to maintain the physical integrity of the property. Responsibilities include: (but are not limited to) Supervision and Scheduling of Maintenance • Assigns daily work to maintenance employees and follow-up for the completeness, • Oversees the accurate and timely completion of work orders assigned., • Ensures that all turnover repairs and services are completed correctly and on schedule. This includes maintenance of appliances, smoke detectors, plumbing, electrical, painting, HVAC, and cleaning, • Ensures all phases of snow removal are executed including shoveling of walkways and parking lots, application of ice-melt (salting) and operating of plows to clear roadways and parking lots Preventive Maintenance • Maintains awareness of the physical condition of the property and identifies and ensures repairs are performed to correct any unsafe conditions. Reports any areas that show signs of more significant problems to Management, • Provides input to Management in relation to potential problems that need to be addressed on the property for the creation of the annual budget Inventory Control • Manages all maintenance purchasing and maintains inventory levels of parts and supplies. Secures approval from Manager on non-routine items, • Ensures the maintenance shop is organized and clean Administration and Record Keeping • Maintains accurate records regarding preventative maintenance, work orders (received and completed), expenditures, apartment turnovers, and work-in-progress, • Processes invoices for payment, • Advanced knowledge of leasing practices, fair housing, lease terms and landlord/tenant law Customer Service • Develops and maintains positive and professional relationships with residents, contractors, and suppliers, • Ensures maintenance requests are met on a timely basis, • Keeps Management informed of significant problems and/or concerns relating to the residents of the property Capital Improvements • Ability to participate in the development of the scope of work, • Act as the point of contact for contractors for bids and to manage the project to insure timely completion, • Other duties as assigned Required Skills and Experience • Minimum of three (3) years of supervisory experience required, • Four (4) or more years’ experience in property maintenance, with a working knowledge and experience in the following areas: Plumbing, HVAC, Electrical, Carpentry and Appliances, • Advanced leadership skills and the ability to build and supervise a team, • Excellent communication and interpersonal skills, • Outstanding organizational and time management skills with the ability to multitask, • Proven track record of facilitating the identification of and providing solutions to complex problems within established processes, • Advanced level of safety knowledge and awareness to oversee safe performance of maintenance team, • Ability to be at work regularly and on time, • Must have valid driver’s license & clean driving record, • Reliable transportation required, • Ability to work weekends or extended hours as required, including on-call rotation Other Preferred Skills & Qualifications including but not limited to • OSHA 10/30, • EPA Section 608, • Mold Remediation Certification, • Lead Safe Renovate Right, • Experience operating a plow truck, • Experience operating heavy equipment (Skid Steer, Mini Excavator) Physical Requirements • Constant need to be on feet; bend, stoop, squat; climb stairs, push or pull, reach above shoulder, climb ladders, grasp/grip/turning; finger dexterity; writing; shoveling; lifting/carrying to perform maintenance supervisor duties, • Must be able to lift up to 50 pounds unassisted

Job Summary Under general supervision, this position is responsible for learning the management of a small driver count and/or non-traditional shifts (including nights and weekends), ensuring safe and timely movement of freight, load assignment, and providing best-in-class customer service. This position will be trained to ensure compliance with DOT regulations. They are responsible for all drivers' compliance and company regulations while working with internal and external contacts to ensure the accurate planning, routing, monitoring, and delivery of freight and loads. Job Description Key Responsibilities: • Learn to build and maintain positive professional relationships with drivers and safe, reliable outside carriers to ensure seamless new carrier set-up, minimize turnover, and maximize ongoing productivity, • Fill in for absent or unavailable personnel and on special projects related to optimizing fleet operations and achieving profitability, • Learn to utilize personnel management including training and orientation of drivers and/or employees including the training and assistance with internal and third party (customer) systems, • Become proficient in maximizing efficiency of fleet operations and profitability and making recommendations for continuous improvement, measuring key performance indicators, and creating, maintaining and presenting customer specific reporting and financial analysis through face-to-face interactions at customer location, • Gain knowledge on how to manage inventory, assets, customer pools and/or assignment of drivers to balance equipment in market, • Learn to perform administrative duties such as payroll, management of the Net-Revenue budget, driver counseling, accident reviews, filing and documenting, resolving pay issues, analyzing P&L statements, invoicing and/or creating operational or financial reports, • Learn to manage yard including checking/inspecting equipment, replacing parts (like mud flaps), completing repairs, etc., and coordinating with maintenance to ensure all regular preventative maintenance services are scheduled on time and all safety related mechanical issues are fixed for account equipment (as required), • Learn to work with drivers, customers, and company personnel to resolve service issues, routing and/or planning, mechanical problems, accessorial pay related issues, etc., as they occur throughout the day and, where necessary, when on call, • Learn to maintain the Company's safety culture to include daily driver safety messages, monthly driver safety briefings, quarterly driver training, annual reviews, and enforce company policies to ensure DOT compliance and company safety requirements are being met, • Learn to assign loads and plan, route, and monitor freight movement to provide safe, on-time service and meet customer requirements, including managing freight exceptions and driver ETA adjustments based on pick-up and delivery schedules, and other environmental factors on the road Qualifications Minimum Qualifications: Bachelor's degree in Business Administration, Transportation/Logistics, Supply Chain, or related field OR High School Diploma/GED with 1 year of experience in management, transportation/logistics, business administration, account management, or related field, and/or equivalent military experience Willing to travel to account, customer, and company event locations when applicable Ability to work across multiple shifts including nights and/or weekends if needed Willingness to regionally relocate dependent on account assignment Preferred Qualifications Experience managing a team Anticipate, recognize, and deal effectively with existing or potential conflicts at the individual, group, or situation level Ability to accurately analyze situations and reach productive decisions based on informed judgment Ability to adapt to changing environments Ability to establish and maintain healthy working relationships with clients, vendors, and peers Ability to meet or exceed team/driver needs and expectations and provide excellent service in a direct or indirect manner Ability to effectively transmit, receive, and accurately interpret ideas through various mediums Ability to recognize, anticipate, and resolve organizational, operational, or process problems The expected starting pay range for this position is between $46,100.00 - $57,600.00 This position is not eligible for employment-based sponsorship. Compensation Factors which may affect starting pay within this range may include skills, education, experience, geography, and other qualifications of the successful candidate. This position may be eligible for annual bonus and incentives based on profitability or volumes in accordance with the terms of the Company’s bonus and incentive plans, as applicable and in effect from time to time. Benefits The Company offers the following benefits for full-time positions, subject to applicable eligibility requirements, as may be in effect from time to time: medical benefit, dental benefit, vision benefit, 401(k) retirement plan, life insurance, short-term and long-term disability coverage, paid time off commensurate with tenure (includes vacation and sick time), six weeks of paid maternity leave along with two weeks of paid parental leave, and six paid holidays annually. Education Bachelors: Business Administration/Management, Bachelors: Supply Chain Management, Bachelors: Transportation Logistics, GED (Required), High School (Required) Work Experience Business Administration, Customer Service/Account Manager, Management-Entry Level, Transportation/Logistics Certifications Job Opening ID: 00637053 Manager Trainee (Open) “This job description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.” J.B. Hunt Transport, Inc. is committed to basing employment decisions on the principles of equal employment opportunity without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, persons with disabilities, protected veterans or other bases by applicable law.