Reading jobs in Trenton, New JerseyCreate job alerts

Job Responsibilities: • Verify vehicle information based on work order information - identify damage, missing parts, and mechanical problems by inspecting all customer vehicles at time of receipt (i.e., interior, exterior, odometer reading, trunk area, engine compartment), noting any damage or repair to frame/paint, engine noise, AC/heater operation, radio, tire condition, etc., • Prepare and complete all necessary documentation., • Set up system for day-end; perform day-end procedures., • Maintain knowledge to ensure all policies and procedures are followed., • Write electronic condition reports (ECR)., • Conduct OVE courtesy walks around inspections., • Maintain knowledge of system capabilities, knowledge of needed/job-relevant software packages, and web-based applications., • Maintain a working knowledge on improvements and changes concerning body mechanical, frame labor, inspection techniques, etc., • Visibly demonstrate safety commitment by following all safety and health procedures and modeling the behaviors related to such. Actively participate in support of all safety activities aligned with Safety Excellence., • Perform other duties as assigned by management., • May be required to work overtime as business needs dictate. Qualifications: Minimum: • High School Diploma/GED., • Generally, less than 2 years of experience in a related field., • Safe driver's needed; valid driver's license required., • Excellent communication and interpersonal skills required. Preferred: • Strong technical understanding, with good organizational skills needed., • Ability to multitask, follow directions and take instruction., • Advanced computer skills., • Ability to stand, walk, or sit for prolonged periods of time; ability to bend, stoop, squat or kneel; ability to lift and hold at least 10lbs at waist level for an extended period of-time; ability to lift-up to 30 lbs. Work Environment: • Exposure to outdoor weather and inclement conditions., • Moderate noise level., • May be exposed to fumes and odors., • May be required to work overtime (more than 40 hours per week) as business needs dictate. USD 15.10 - 22.60 per hour Compensation: Hourly pay rate is in the range of $15.10 - $22.60/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program. Benefits: Employees are eligible to receive a minimum of sixteen hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship. EOE, including disability/vets

Job Description Foreman Electrician (Commercial) Trenton, NJ Hourly Rate: $35.00-$38.00 Responsibilities: • Responsible for managing commercial and industrial electrical projects, • Experience reading and interpreting electrical drawings, schematics, and specifications while adhering to electrical codes, • Hands on experience bending an installing RMC, IMC, and EMT, • Experience leading a team of electricians and assigning required daily tasks, • Tracking manpower for specific tasks and assuring efficient execution, • Job-site management ensuring the proper materials are onsite to perform the scope of work required to be completed, • Successful completion of projects within scheduled deadlines and budgets, • Coordinating and communicating project updates with the office team regarding change orders and other pertinent project information, • Strong communication with the onsite supervisor and other trades, • Able to complete and deliver as-builts and project closeout documentation Requirements • 8+ years of experience in commercial and industrial electrical projects, • Must have 3+ years of experience leading a team of 3-5 electricians, • Capable of working in a high reach, scissor lift, and or bucket truck, • Possess excellent communication skills, professional demeanor, and detail oriented, • Company Van (picked up at shop), • Travel paid to and from office, • Certified in OSHA 10, • Must possess strong knowledge of NEC, • Must have valid driver's license

Job Description Who We Are Binsky is a leader in world-class mechanical construction. Dedicated service to our clients has elevated us as the premier mechanical contractor for projects of all sizes and scopes. Innovation is the key at Binsky and along with our creative processes, we are always on the cutting edge of technology. Recognized as one of the most respected mechanical contractors in New Jersey and Pennsylvania, Binsky delivers high quality workmanship on projects from large traditional construction to commercial HVAC, plumbing, and service. Building incredible projects requires exceptional people. We are seeking an Estimator (HVAC) for our PA MCaP division. Why We Need You! We need talented individuals, like you, who care about the company and our customers, and can help us continue to grow and succeed! The Role The Estimator is responsible for evaluating bid specifications, analyzing blueprints, proposals and other documentation, to successfully bid and win projects. Accountabilities: Estimating Process • Develop and provide complete, accurate and timely detailed estimates representing a projects mechanical/plumbing system costs, associated general conditions, required overhead and profit, • Maintain all files of working bid documents, notes and assumptions of project estimates and coordinate with the project team to ensure a smooth transition., • Perform all work in accordance with company processes and procedures., • Use processes and procedures to eliminate bid errors and omissions., • Prepare complete bid documentation prior to bid closing with management. Proposals and RFP compliance • Review proposal specifications, drawings, attend pre-bid meetings, etc. to determine scope of work and required contents of estimate., • Populate clarifications, exceptions and bid forms. Plan/Spec Compliance • Identify any unique requirements of any proposals and incorporate the related costs into those project estimates. Take-Off • Reading and understanding of mechanical blueprints and other specifications for takeoffs., • Perform quantity take-off of Plumbing, HVAC, and Process Piping for plan/spec and design build projects. Vendor/Sub Quotes • Work with and obtain pricing from various vendors and subcontractors through completion of bids. Qualifications: Skills • A solid understanding and broad knowledge of Plumbing, HVAC and Process systems for commercial and institutional construction, including hospitals, schools, R&D facilities and multi-story buildings., • Strong computer and technology skills including estimating software such as Quickpen., • Ability to prioritize, set goals and manage multiple tasks under time constraints and meet strict deadlines, • Ability to read architectural, structural and mechanical plans & specifications and be familiar with a variety of plumbing, HVAC and Process systems and terminology, • Demonstrate strong math aptitude, organization, verbal, written and analytical skills, • Knowledge of Plumbing and Mechanical theory and code to identify issues with the designs or conflicts with other trades Education and Experience • Bachelor’s Degree in Mechanical Engineering Preferred, • 2+ years’ experience in commercial plumbing or HVAC estimating, • Must be comfortable working with clients, architects, engineers, subcontractors and vendors Physical Requirements Ability to sit for long periods of time, walk, stand, bend, stoop, use hands and fingers & lifting <40 pounds. What We Offer Binsky values the well-being of its employees and offers competitive wages and a range of benefits: • Medical, Dental and Vision benefits, • 401k with company contribution, • 8 paid holidays per year, • Paid Time Off Binsky is an EOE. This job description does not necessarily represent an exhaustive list of responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. While this is intended to be an accurate reflection of the job, management reserves the right to revise the job or require that other different tasks are performed as circumstances change.

Job Description Are you a caring, compassionate person looking to make a real difference in the life of a young person through peer support and mentorship? Bring your commitment and skill to a team that is dedicated to helping others on their journey to wellness and recovery! Features a competitive starting salary of $17.00/hour. • All staff start at Part-time and have the potential to build to a Full-time position. Job Overview: A Certified Peer Specialist (CPS) will serve as an advocate and mentor to Transition Age Youth (ages 14-26) with serious mental illness and/or emotional disturbance to develop community supports, navigate mental health systems and access resources, support maintenance of wellness and recovery based on personal lived experience, and INSPIRE HOPE to help youth reach their full potential and overcome obstacles in the face of life’s daily challenges. A CPS will not only assist in the identification of individualized goals but also walk the young person through the steps to achieve success with their goals. A CPS meets at least weekly in the home and community with a focus on helping the young person maintain personal wellness and develop the use of coping skills, build social skills and a social community, identify educational and/or employment opportunities, improve functioning in their environment, and enhance and practice daily living skills. Qualifications: • Be certified as a Peer Specialist (CPS)., • Have a high school diploma or GED., • Maintain valid driver’s license, insurance, and vehicle., • Able to work at least 20 hours/week including, at minimum, 3 evenings., • Exhibit stability and competency in personal wellness and recovery and use of coping skills., • Be able to reflect the culture and understand the values of the Transition Age Youth population., • Demonstrate proficiency in reading, writing, and computer literacy. Job Responsibilities: • Participate in weekly, individual Supervision., • Engage in local travel in your own vehicle to offsite locations as required by caseload, supervision, and/or trainings., • Transport youth to various community locations, as needed., • Document session activity through electronic health records, progress notes, and program-specific paperwork by typing., • Ensure program files are organized, and paperwork is completed within required deadlines., • Maintain a varied work schedule, including evenings., • Meet at least weekly with all assigned youth on an assigned caseload., • Work both individually and in teams with colleagues., • Effectively communicate and interact with youth, peers, and community representatives., • Serve as a role model and coach to guide youth toward recovery through shared experiences., • Assist youth in implementing identified coping strategies to aid with crisis support., • Support the development of community roles and natural supports, • Assist with accessing and participating in community events and activities., • Cultivate youth’s ability to make informed, independent choices., • Plan and facilitate practical activities leading to increased self-worth and independence., • Model and promote skills needed for community integration and independent living., • Assist youth to develop and maintain positive personal and social support networks., • Support youth in becoming active community members. Use and implement the 5 core values of Trauma-Informed Care in all work practices - Safety, Trustworthiness, Choice, Collaboration, & Empowerment. Benefits and Compensation: • Part Time positions available with the potential to transition to Full Time, • Starting rate of $17/hour, • Annual rate increases, • 9 Paid Holidays paid at 4 hours each, if maintaining 20 hours per week, • Paid Time Off accrual, if maintaining 20 hours per week, • 401K plan with company match and profit sharing, • Mileage and Expense reimbursement for travel and training, • Clearance Reimbursement, • And of course, and most importantly, the opportunity to help shape the lives of young people through peer mentorship Child and Family Focus is an equal opportunity and drug free employer. We provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, gender identity, or genetics. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Powered by JazzHR sk8mxBQiE1

Job Description August Loving Home Care is seeking compassionate and dependable Home Health Aides to provide high-quality, non-medical care to seniors and individuals with disabilities in their homes. Our mission is rooted in dignity, respect, and genuine human connection. Responsibilities include assisting clients with activities of daily living (bathing, dressing, grooming, toileting), mobility and transfers, light meal preparation, light housekeeping related to client care, companionship, and monitoring/reporting changes in condition. Caregivers must follow individualized care plans and maintain accurate documentation. Qualified candidates should have prior caregiving experience (preferred), strong communication skills, reliable transportation, and the ability to pass required Pennsylvania background checks. HHA certification is preferred where applicable. We offer competitive pay, flexible scheduling, ongoing training, and a supportive team environment. If you are professional, patient, and committed to delivering compassionate care, we encourage you to apply and grow with our mission-driven agency. QUALIFICATIONS: Minimum of ninth grade education; high school diploma or GED preferred. Must demonstrate satisfactory completions of any stated mandated training. Applicant must be bondable and meet or exceed minimum qualifications for each of the following background checks: criminal background investigation, professional reference checks and give permission to submit to random drug testing. Must satisfactorily complete the following: 1. Complete and pass ALHC’s Competency Training Test the following subject areas:  Confidentiality  Patient control and the independent living philosophy.  Instrumental activities of daily living.  Recognizing changes in the Patient that need to be addressed.  Basic infection control.  Universal precautions.  Handling of emergencies.  Documentation.  Recognizing and reporting abuse or neglect.  Dealing with difficult behaviors. ESSENTIAL JOB FUNCTIONS: 1. Provide general attention to Patient’s non-medical needs in accordance with a Plan of Care., 2. Provides companionship for Patients’ including talking and listening, reading aloud, providing social and emotional support., 3. Promote the Patient's mental alertness through involvement in activities of interest., 4. Provides emotional support and promotes a sense of well-being,, 5. Provide for a dean, safe, and healthy environment for Patients and family members. Provides light housekeeping tasks including laundering of Patient's garments and linens,, 6. Prepare and serve meals as directed and ensure dishes are washed and kitchens is clean after each meal., 7. Assists Patient in completing necessary phone calls, letter writing, etc., 8. Accompanies Patient on walks, community trips, doctor's office, bank, beauty salons, etc., 9. Reminds Patient to take self-administered medications., 10. Observes and reports any changes in the Patient's mental, physical, or emotional condition or home situation to immediate supervisor in a timely manner \nCompany Description August Loving Home Care is a family-centered home care agency dedicated to providing compassionate, high-quality, non-medical care to seniors and individuals with disabilities throughout Pennsylvania. Our mission is simple: deliver care with dignity, respect, and genuine human connection. We believe exceptional care begins with exceptional caregivers. That’s why we foster a supportive, professional environment where team members are valued, heard, and equipped to succeed. We emphasize integrity, reliability, and excellence in everything we do — from client relationships to caregiver development. At August Loving Home Care, we don’t see this as just a job — it’s a calling. Our caregivers play a vital role in helping clients maintain independence, safety, and comfort in their own homes. If you are compassionate, dependable, and take pride in delivering high-quality care, you’ll find a team here that supports your growth and recognizes your impact. August Loving Home Care is a family-centered home care agency dedicated to providing compassionate, high-quality, non-medical care to seniors and individuals with disabilities throughout Pennsylvania. Our mission is simple: deliver care with dignity, respect, and genuine human connection.\r\n\r\nWe believe exceptional care begins with exceptional caregivers. That’s why we foster a supportive, professional environment where team members are valued, heard, and equipped to succeed. We emphasize integrity, reliability, and excellence in everything we do — from client relationships to caregiver development.\r\n\r\nAt August Loving Home Care, we don’t see this as just a job — it’s a calling. Our caregivers play a vital role in helping clients maintain independence, safety, and comfort in their own homes.\r\n\r\nIf you are compassionate, dependable, and take pride in delivering high-quality care, you’ll find a team here that supports your growth and recognizes your impact.

Position: Manual Machinist Location: Trenton, NJ Pay Rate: $34.25 per hour, with benefits Shift Options: • 2nd Shift: Monday–Friday, 2:00 PM–10:00 PM, • 3rd Shift: Sunday–Thursday, 10:00 PM–6:00 AM Job Description: Our client is seeking an experienced Manual Machinist to join their team in Trenton, NJ. This role involves precision machining, manual milling and turning, tooling, die maintenance, and fabrication of components to meet exact specifications. The ideal candidate will have extensive experience operating conventional machine tools, working with CNC machinery, reading blueprints, and machining precision parts. Key Responsibilities: • Set up and operate conventional machine tools, including manual lathes, milling machines, grinders, and drill presses., • Perform manual machining, turning, grinding, drilling, tapping, and finishing operations., • Fabricate, repair, modify, and maintain tools, dies, jigs, gauges, and fixtures., • Read and interpret blueprints, technical drawings, sketches, and specifications., • Machine blocks and components to precise dimensions and tolerances., • Use precision measurement instruments, including calipers, micrometers, gauge blocks, and dial indicators., • Work with stamping and progressive dies, die cutting, and forming applications., • Fit, assemble, adjust, and test tools and dies to ensure proper operation., • Inspect finished components for dimensional accuracy, surface quality, defects, and conformity to specifications., • Select appropriate metals and alloys based on strength, hardness, and heat-resistance requirements., • Perform filing, polishing, shimming, and other finishing operations to ensure proper fit and function., • Design and fabricate jigs, fixtures, templates, and other work aids as needed., • Perform heat-treating operations when required., • Troubleshoot machining and tooling issues and communicate recommended solutions., • Enter and retrieve information using computerized maintenance systems., • Document machining and maintenance activities, equipment issues, and follow-up requirements., • Maintain a safe, clean, and organized work area., • Assist with apprentice training and ongoing technical development as needed. Required Qualifications: • Journeyman certification or at least 3 years of experience performing complex work as a Manual Machinist, Tool and Die Maker, or Machinist., • Strong experience with manual lathes and conventional milling machines., • Hands-on experience with grinding, drilling, tapping, and machining blocks and components., • Experience with tooling, stamping, progressive dies, die cutting, and forming processes., • Familiarity with CNC machinery is preferred., • Ability to read and interpret blueprints and technical specifications., • Strong knowledge of precision measurement tools, machining tolerances, and dimensional inspection., • Experience fabricating, repairing, modifying, and maintaining tools and dies., • Ability to follow safety procedures and maintain a clean working environment., • Ability to complete a required physical examination. ABOUT US: PrideNow is Pride Global's light industrial staffing organization, a distinguished division within the Pride Global umbrella. Aligned with the overarching mission of Pride Global, we specialize in delivering top-tier human resources and workforce solutions to the light industrial industry. Leveraging the strength of our global network, PrideNow is dedicated to empowering diversity, ensuring compliance, and driving unparalleled success for businesses. As part of the Pride Global family, we bring forth a commitment to excellence and a comprehensive approach to meeting the unique staffing needs of our clients worldwide. Welcome to PrideNow, where our local expertise seamlessly integrates into the global excellence of Pride Global, shaping a future of dynamic workforce solutions. BENEFITS DISCLOSURE: Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - offer eligible employees comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), a 401(k)-retirement savings, life & disability insurance, an employee assistance program, identity theft protection, legal support, auto and home insurance, pet insurance, and employee discounts with some preferred vendors. EEO STATEMENT: As a certified minority-owned business, Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - are committed to creating a diverse environment and are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics. Fair Chance Employment: PrideGlobal and its affiliates are a Fair Chance employer. We consider all qualified applicants, including those with criminal histories, in a manner consistent with applicable state and local Fair Chance laws and ordinances, including, the California Fair Chance Act and all applicable local Fair Chance ordinances. Accommodations: We are committed to providing reasonable accommodations to applicants and employees with disabilities. If you require a reasonable accommodation to participate in the application or interview process, or to perform the essential functions of this role, please contact us. Only applicable for San Francisco Candidates: Under the San Francisco Lactation in the Workplace Ordinance, we will provide written notice of lactation accommodation rights, and this notice will automatically be given upon hiring, any inquiry of parental leave or lactation accommodation.

Manufacturing Associate I, II or II (depending on experience) Location: 100% onsite in Pennington, NJ Duration: 6 month contract, potential for extension or conversion Schedule: 1st or 2nd shift These positions require a lot of flexibility – may require OT, evening work, overnight work, weekends, & holidays. --- Position Overview The Manufacturing Associate will be responsible (or lead, depending on level) for the day-to-day operations of downstream processing in a clean room environment. This role includes buffer and media preparation, chromatography, tangential flow filtration (TFF), viral filtration, and aseptic processing. Key Responsibilities: · Buffer and Media Preparation: Prepare and maintain buffers and media required for downstream processes. Ensure accurate formulation and timely availability of all solutions. Maintain detailed records of preparation and usage. · Chromatography: Operate and maintain chromatography systems for protein purification. Monitor process parameters and ensure consistent product quality. Troubleshoot and resolve any issues that arise during chromatography runs. · Tangential Flow Filtration (TFF): Perform TFF operations for concentration and diafiltration of biopharmaceutical products. Optimize TFF parameters to achieve desired product specifications. Document all TFF activities and results. · Viral Filtration: Conduct viral filtration to ensure the safety and purity of biopharmaceutical products. Validate and monitor viral filtration processes. Maintain compliance with regulatory standards for viral safety. · Aseptic Processing: Perform aseptic processing in a clean room environment. Adhere to strict aseptic techniques to prevent contamination. Ensure compliance with Good Manufacturing Practices (GMP). · Clean Room Operations: Maintain a clean and organized work environment. Follow all clean room protocols and procedures. Participate in regular clean room maintenance and cleaning activities. · Documentation and Compliance: Maintain accurate and detailed records of all manufacturing activities. Ensure compliance with GMP and regulatory requirements. Participate in audits and inspections as needed. · This is a full-time non-exempt position (40 hours/week) involving a standard schedule and requires availability to work flexible shifts including overtime, evenings, weekends and holidays, as operational needs require. · Other duties as assigned. Qualifications · Education and Experience: Bachelor's degree in biotechnology, Biochemistry, Chemical Engineering, or a related field with 1-3+ years of relevant experience. H.S diploma with 4+ years of experience will be considered in lieu of Bachelor's Degree. · Skills: Ability to follow instructions and procedures. Experience with buffer and media preparation, chromatography, TFF, viral filtration, and aseptic processing a plus. Excellent problem-solving and analytical skills. Effective communication, leadership and teamwork abilities. Strong knowledge and experience working in a biopharmaceutical cGMP- regulated environment. This position requires the ability to stand for extended periods, bend, and lift objects weighing up to 50 pounds. Candidates must be physically capable of performing these tasks safely and effectively. · Communication: Strong verbal communication skills and documentation skills required. Must be able to speak clearly to convey information to others. Timely follow-up and response is required. Physical Demands · This job includes sitting, standing, walking, using hands/fingers for typing and handling documents, reaching, and maintaining close vision for computer work. · Must have clarity of vision for distances of 20 feet or more, necessary for recognizing hazards or reading signage. · In addition to working a laboratory setting, this job functions in an open office setting using standard office equipment such as computers, phones, calculators, copiers, fax machines, and file cabinets. · This job has repetitive motion repeated movements of the hands, wrists, or fingers, such as typing and using laboratory equipment. · This job may require stooping, kneeling or crouching for accessing files in lower cabinets or performing other tasks. · This position requires the ability to stand for extended periods, bend, and lift objects weighing up to 50 pounds.

Job Description Join Help at Home as a Direct Support Professional (DSP) and make a meaningful difference in your community. You will provide one-on-one support to individuals with intellectual and developmental disabilities, helping them live safely, independently, and with dignity in their homes and communities. Pay and Benefits • Competitive pay: $18-$20 per hour, • Experience-based starting pay: Relevant direct support, caregiving, or healthcare experience is considered when determining your starting rate within the posted range, • $1,000 sign-on bonus for eligible new hires. *Eligibility and payout terms apply, • Flexible scheduling options, • Paid training and career development opportunities, • Health benefits, paid time off, and additional cash bonus opportunities for eligible employees, • Mileage reimbursement for eligible travel Your exact starting rate may also vary based on the type of support provided, assigned schedule, and work location. What You’ll Do As a Direct Support Professional, you will help individuals build daily living skills, participate in their communities, and work toward their personal goals. Responsibilities may include: • Reading, understanding, and following each individual’s Individual Support Plan, • Reporting updates, progress, and concerns to the IDD Program Specialist, • Assisting with daily living activities such as cooking, cleaning, grooming, hygiene, and transportation, • Encouraging participation in shopping, social events, appointments, and other community activities, • Supporting individuals as they work toward personal goals and greater independence, • Promoting personal choice, self-advocacy, dignity, and respect, • Accurately documenting services, activities, and progress, • Communicating with team members to provide consistent, high-quality support Required Qualifications Candidates must be at least 18 years old and meet at least one of the following requirements: • High school diploma or equivalent, • Completion of a state-approved training program, • Demonstrated competency and a passing score on the required written competency test Candidates must also have: • The ability to successfully complete required background checks and in-service training, • A valid driver’s license, • Reliable transportation with proof of insurance, vehicle registration, and inspection, • The ability to provide safe and respectful support in individuals’ homes and communities, • Compassion, reliability, and a commitment to helping others Why Help at Home? For more than 50 years, Help at Home has provided trusted, person-centered care in local communities. Our Direct Support Professionals help individuals live more independently while building meaningful careers in care. Veterans are encouraged to apply. We value the experience, dependability, and skills you bring to our team. *New Hire Milestone Bonus: The $1,000 new hire milestone bonus is valid for caregivers that start on 6/22/2026 or later. This new hire bonus is paid in 8 increments, with the total accumulated $1,000 paid out after the caregiver has worked 1,000 hours from the start date. Caregivers must be active and must use electronic visit verification for hours to accumulate toward payout milestones. Caregivers transferring from an organization within the Help at Home, LLC portfolio of companies are not eligible to receive the bonus. Former employees must be returning after an absence period of at least one year to be eligible. The milestones must be reached within 18 months from start date. Caregivers must comply with state background screening requirements. Compensation, benefits, time off, and bonuses vary by state and location, so please ask for complete details at your interview. Data Security and Privacy Statement At Help at Home, we prioritize protecting your personal information during the hiring process. We comply with all relevant data privacy regulations, including HIPAA and SOX where applicable. Your data will only be used to assess your employment suitability and won't be shared with unauthorized parties. We use strong security measures to protect your information from unauthorized access or disclosure. By submitting your application, you consent to this process. You can access, modify, or request deletion of your data by contacting us. Employees must adhere to our data protection policies and legal requirements to safeguard sensitive information.

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

We are urgently looking for people interested in taking online surveys for Fortune 500 brands. If you are a self-starter, looking for flexible hours throughout the week, this may be for you! Earn up to $25 per survey. Share your opinion and help influence brand decisions on services and products you use every day. • Your honest opinion, • Attention to details, • Basic computer and internet skills, • No experience required, • You must be 18+ years old, • Have a desire to work from home, • Looking to earn extra income, • Access to a computer or smartphone, • Have high-speed internet access, • Follow instructions, • Basic reading and writing skills, • Take at least 2 surveys per week, • Earn up to $25 per survey, • Be your own boss, • Work your own hours, • Work from the comfort of your own home, • Share your opinion to help shape better products and services, • Get paid by: Check, Venmo, Paypal, and/or Giftcards Online surveys are a great way to earn extra income as a side gig/hustle, part-time job or even as a full time job. Online surveys can pay up to $25 per completed survey. Online Survey takers come from all different backgrounds including sales, retail, managers, management, customer service, grocery, restaurant food cooks, servers, cashiers, admin and many more! There is absolutely no experience required, just your honest opinions!

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25 / hr. and $45 / hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. We are a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. Main Duties : Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.) Take care of the product being tested and use it responsibly Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.) Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses) There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm Write reviews as requested in the In-Home Usage Test Daily Schedule for each project Requirements : Ability to follow specific instructions Excellent attention to detail and curious spirit Be able to work 15-25 hours per week and commit to a certain routine Have access to a computer and a reliable internet connection Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. Benefits : Very competitive pay rate Weekly pay Work around your own schedule Learn about an exciting industry Telecommute (you can work from home, work or school) Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25 / hr. and $45 / hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. We are a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. Main Duties : Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.) Take care of the product being tested and use it responsibly Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.) Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses) There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm Write reviews as requested in the In-Home Usage Test Daily Schedule for each project Requirements : Ability to follow specific instructions Excellent attention to detail and curious spirit Be able to work 15-25 hours per week and commit to a certain routine Have access to a computer and a reliable internet connection Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. Benefits : Very competitive pay rate Weekly pay Work around your own schedule Learn about an exciting industry Telecommute (you can work from home, work or school) Most of the time you can keep the product you tested

Job DescriptionBenefits/Perks • Flexible Scheduling, • Competitive Compensation, • Careers Advancement Job Summary We are looking for a Home Care Aide to join our team! You will be directly working with patients, following a one-on-one care plan in patient homes. You operate with a big heart, not only providing personalized and attentive care but by building genuine relationships with those you serve. You are detail-oriented, highly organized, and committed to creating a healthy environment that meets patient needs. Strong verbal and written communication skills are needed to succeed in this role. Prior Home Health or Hospice experience is a plus. Responsibilities • Assist patients with daily activities such as moving in and out of beds, baths, wheelchairs, or automobiles, • Care for patients by changing bed linens, doing laundry, cleaning the home, or assisting with personal care, • Maintain records of patient care, condition, progress, or problems to report and discuss observations with the supervisor, • Build relationships with patients by conversing or reading aloud to help keep them mentally healthy and alert, • Give medications and immunizations, • Engage patients in exercises or other activities Qualifications, • Graduated from an accredited Home Health Aide program, • High School Diploma or GED, • One year prior professional experience, • Driver’s license required, • CPR certification required

Job DescriptionBenefits/Perks • Flexible Scheduling, • Competitive Compensation, • Careers Advancement Job Summary We are looking for a Home Health Aide to join our team! You will directly work with patients, following a one-on-one care plan in patient homes. You operate with a big heart, not only providing personalized and attentive care but by building genuine relationships with those you serve. You are detail-oriented, highly organized, and committed to creating a healthy environment that meets patient needs. Responsibilities • Assist patients with daily activities., • Care for patients by changing bed linens, doing laundry, cleaning the home, or assisting with personal care, • Maintain records of patient care, condition, progress, or problems to report and discuss observations with the supervisor, • Build relationships with patients by conversing or reading aloud to help keep them mentally healthy and alert Qualifications, • Graduated from an accredited Home Health Aide program, • High School Diploma or GED, • One year prior professional experience

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25 / hr. and $45 / hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. We are a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. Main Duties : Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.) Take care of the product being tested and use it responsibly Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.) Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses) There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm Write reviews as requested in the In-Home Usage Test Daily Schedule for each project Requirements : Ability to follow specific instructions Excellent attention to detail and curious spirit Be able to work 15-25 hours per week and commit to a certain routine Have access to a computer and a reliable internet connection Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. Benefits : Very competitive pay rate Weekly pay Work around your own schedule Learn about an exciting industry Telecommute (you can work from home, work or school) Most of the time you can keep the product you tested

Job DescriptionBenefits: • 401(k), • Flexible schedule, • Health insurance We’re Hiring! Join the Jersey Shore Restaurant Group and be part of a team that thrives on excellence, creativity, and growth. With renowned locations like Half Moon Point, Harpoon Willy's, Coastal Canteen, we offer diverse hospitality opportunities—from culinary and mixology to customer service roles. We are seeking servers to join our growing team. We remain dedicated to creating an atmosphere that embodies warmth, comfort, and quality dining—starting with team members who ensure every guest feels welcomed and valued. Work in a team-oriented, high-volume, fast-paced, guest-centric environment to provide guests with a fresh dining experience that celebrates living well. One key to our success is the high standards we set for ourselves and each other. That includes placing the health and safety of our team members and guests as a top priority. We are committed to the highest safety and sanitation practices, including ensuring team member wellness and maintaining clean restaurants. Qualifications: • Previous server with bar knowledge is helpful, but not required, • 1-2 years of food service experience, • Minimum education: High School (or equivalent) Diploma, • A thorough understanding of fine and casual dining, • Must be of legal age to serve liquor according to state law, • Possesses excellent customer service skills, • Must be dependable, • Must be able to work in a fast-paced environment, • Must have strong communication and interpersonal skills, • Must be able to work in a team environmentResponsibilities:, • Engage with guests from diverse backgrounds, providing a first-class experience and dedicated service they will carry with them long after they’ve left our premises, • Ideal candidates are dependable, customer service-centric, and work well in a team, • Demonstrating a strong level of communication and interpersonal skills, a Restaurant Server will be processing orders and serving food & beverage items to customers, ensuring 100% guest satisfaction, • Ideal candidates have flexible schedules with availability to work weekends and holidays, as needed, • Maintain a professional appearance at all times, • Provide prompt and efficient customer service, • Display knowledge of the F&B menu, • Takes guest's food and/or drink orders and turns into kitchen, bar, etc, • Serve beverages and prepared meals to guests in an accurate and timely manner, • Adhering to sanitation, safety, and alcohol beverage control policies including confirming legal drinking age and discontinuing service to intoxicated guests, • Checks back to ensure guest(s) satisfaction; replenishes items as necessary and/or requested, • Suggests and serves dessert, coffee, and other items as applicable and/or necessary, • Handles all cash and/or credit cards for payment following all standard operating procedures, • Keeps tables, dining room, and workstation(s) sanitized and organized, • Listen and respond to customer complaints, • Performs clean-up and closing procedures as assigned by manager, • Perform all other duties assigned by the supervisor or manager, • Physical activity including long periods (6-8 hours) of standing, walking, bending, and scooping, • The employee will be required regularly to reach with arms and hands, • The employee occasionally will be required to lift to 30lbs, • Use of sight, reading, and wrist movement to serve meals and beverages, operate food service equipment and clean food service areas, • Specific vision abilities include close, distance, color, and peripheral vision, and depth perception, • Work extended hours during the holiday season, • Work weekends and holidaysShift: 10 hour shift 12 hour shift 8-hour shift Day shift Evening shift Start your journey today and make your mark with JSRG!

Job DescriptionBenefits: • 401(k), • Flexible schedule, • Health insurance We’re Hiring! Join the Jersey Shore Restaurant Group and be part of a team that thrives on excellence, creativity, and growth. With renowned locations like Half Moon Point, Harpoon Willy's, Coastal Canteen, we offer diverse hospitality opportunities—from culinary and mixology to customer service roles. We are seeking servers to join our growing team. We remain dedicated to creating an atmosphere that embodies warmth, comfort, and quality dining—starting with team members who ensure every guest feels welcomed and valued. Work in a team-oriented, high-volume, fast-paced, guest-centric environment to provide guests with a fresh dining experience that celebrates living well. One key to our success is the high standards we set for ourselves and each other. That includes placing the health and safety of our team members and guests as a top priority. We are committed to the highest safety and sanitation practices, including ensuring team member wellness and maintaining clean restaurants. Qualifications: • 1-2 years of food service experience, • Must be able to work days, nights, weekends and holidays, • Minimum education: High School (or equivalent) Diploma, • A thorough understanding of fine and casual dining, • Must be of legal age to serve liquor according to state law, • Possesses excellent customer service skills, • Must be dependable, • Must be able to work in a fast-paced environment, • Must have strong communication and interpersonal skills, • Must be able to work in a team environmentResponsibilities:, • Engage with guests from diverse backgrounds, providing a first-class experience and dedicated service they will carry with them long after they’ve left our premises, • Ideal candidates are dependable, customer service-centric, and work well in a team, • Demonstrating a strong level of communication and interpersonal skills, a Restaurant Server will be processing orders and serving food & beverage items to customers, ensuring 100% guest satisfaction, • Ideal candidates have flexible schedules with availability to work weekends and holidays, as needed, • Maintain a professional appearance at all times, • Provide prompt and efficient customer service, • Display knowledge of the F&B menu, • Takes guest's food and/or drink orders and turns into kitchen, bar, etc, • Serve beverages and prepared meals to guests in an accurate and timely manner, • Adhering to sanitation, safety, and alcohol beverage control policies including confirming legal drinking age and discontinuing service to intoxicated guests, • Checks back to ensure guest(s) satisfaction; replenishes items as necessary and/or requested, • Suggests and serves dessert, coffee, and other items as applicable and/or necessary, • Handles all cash and/or credit cards for payment following all standard operating procedures, • Keeps tables, dining room, and workstation(s) sanitized and organized, • Listen and respond to customer complaints, • Performs clean-up and closing procedures as assigned by manager, • Perform all other duties assigned by the supervisor or manager, • Physical activity including long periods (6-8 hours) of standing, walking, bending, and scooping, • The employee will be required regularly to reach with arms and hands, • The employee occasionally will be required to lift to 30lbs, • Use of sight, reading, and wrist movement to serve meals and beverages, operate food service equipment and clean food service areas, • Specific vision abilities include close, distance, color, and peripheral vision, and depth perception, • Work extended hours during the holiday season, • Work weekends and holidaysShift: 8-hour shift Day shift

Think you have what it takes? The Opportunity: Selecting products throughout the warehouse leveraging warehouse equipment that may include single or double electric pallet jacks, reach lifts or forklifts and other duties as assigned by site leadership Use of VoCollect, RF Scan-guns or reading manual

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25 / hr. and $45 / hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. We are a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. Main Duties : Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.) Take care of the product being tested and use it responsibly Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.) Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses) There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm Write reviews as requested in the In-Home Usage Test Daily Schedule for each project Requirements : Ability to follow specific instructions Excellent attention to detail and curious spirit Be able to work 15-25 hours per week and commit to a certain routine Have access to a computer and a reliable internet connection Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. Benefits : Very competitive pay rate Weekly pay Work around your own schedule Learn about an exciting industry Telecommute (you can work from home, work or school) Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25 / hr. and $45 / hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. We are a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. Main Duties : Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.) Take care of the product being tested and use it responsibly Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.) Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses) There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm Write reviews as requested in the In-Home Usage Test Daily Schedule for each project Requirements : Ability to follow specific instructions Excellent attention to detail and curious spirit Be able to work 15-25 hours per week and commit to a certain routine Have access to a computer and a reliable internet connection Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. Benefits : Very competitive pay rate Weekly pay Work around your own schedule Learn about an exciting industry Telecommute (you can work from home, work or school) Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr., depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. • Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc.), • Take care of the product being tested and use it responsibly, • Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc.), • Some In-Home Usage Tests projects may require participants to use MFour’s Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion® insights to gain unparalleled depth of responses), • There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm, • Write reviews as requested in the In-Home Usage Test Daily Schedule for each project, • Ability to follow specific instructions, • Excellent attention to detail and curious spirit, • Be able to work 15-25 hours per week and commit to a certain routine, • Have access to a computer and a reliable internet connection, • Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or older A paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. • Very competitive pay rate, • Weekly pay, • Work around your own schedule, • Learn about an exciting industry, • Telecommute (you can work from home, work or school), • Most of the time you can keep the product you tested

Job Description Cross Dock Shift Supervisor HRforGrowth® is engaged as the talent acquisition partner to conduct this search on behalf of a client organization that is hiring for this role. HRforGrowth is not the employer for this position. HRforGrowth identifies, evaluates, and presents top-tier candidates through its global talent acquisition practice; all employment decisions — including final selection, offer terms, compensation, and conditions of employment — are made solely by the hiring organization. Key Results Area Assigning work and directions to team members while providing training and coaching Work and communicate with team members to meet client SLA and Key Performance Indicators (KPI) as required Comply with all safety and quality policies and conduct audits when assigned Maintain a clean, organized, and safe work area Support and maintain corporate quality, health and safety standards, processes, policies, practices, and work instructions Skills & Qualifications High School Diploma or GED is required; a four (4) year college degree is a plus Previous leadership experience is required; preferably in a warehouse setting Lean manufacturing experience and the use of various warehouse automations equipment (RF, Voice, etc.) is a plus Strong PC skills, including Microsoft Word and Excel Excellent math, reading, and communication skills Able to effectively communicate and provide coaching to all employees Superior attention to detail to ensure accuracy Able to work independently and in a team leadership role Capable of balancing and effectively utilizing team resources • Able to lift/move up to 40 pounds alone and greater weights in a team-lift environment; able to lift, carry, bend, stretch, and stand for long periods, • Can operate an Electric Pallet Jack Truck The pay rate is $75,000 annually. About HRforGrowth: HRforGrowth is a full-service HR and talent partner built to support companies that are scaling, transforming, or navigating change. HRFG is globally recognized for delivering quality, speed, and cost-effective talent solutions across every level of the workforce. Through its global talent acquisition practice, HRforGrowth applies world class rigor and precision to identifying exceptional professional and executive talent on behalf of its clients — from temporary staffing to permanent hourly workers through to placing C-suite executives. HRforGrowth is presenting this opportunity in its capacity as the retained search partner and does not serve as the employer of record for this position. Equal Employment Opportunity: In its recruiting and search practices, HRforGrowth does not discriminate on the basis of race, color, religion, national origin, age, marital status, physical or mental disability, sex, sexual orientation, gender, or gender identity, and welcomes applications from all qualified individuals. HRforGrowth evaluates and presents candidates to its clients without regard to any protected characteristic. HRforGrowth endeavors to advise the hiring organization to comply with all applicable federal, state, and local equal employment opportunity laws — including those enforced by the U.S. Equal Employment Opportunity Commission (EEOC) — in its hiring decisions, terms of employment, and workplace practices. Powered by JazzHR c7SdlFi0cx

Job Description At Universal Display Corporation (Nasdaq: OLED) (UDC), we’re changing the way people see the world. If you’re reading this on a smartphone, there’s a good chance UDC’s materials are producing the light and color shining from your screen right now. UDC’s OLED ingredients are key parts of stunning, energy-efficient displays used in everything from smartwatches to phones, tablets, laptops, monitors, TVs and automobiles. Virtually every OLED consumer electronics product around the world uses UDC’s phosphorescent OLED materials and technologies. UDC is a publicly traded company and pioneer in the OLED industry. When you join our global team, you are embarking on a journey at the forefront of display technology and organic electronics that impacts the daily lives of people around the world. From engineers to chemists, Ph.D. scientists, technicians, lawyers and more, our UDC team is continuously advancing our field. With a focus on energy efficiency, UDC’s team is contributing to making a better, more sustainable planet. Please visit us at www.oled.com. Job Summary: The testing and data processing infrastructure at UDC is continuously expanding and improving to meet the needs of a growing research and development team. The Research Engineer will be part of a professional team engaged in the development and maintenance of custom-built OLED device characterization test equipment. Key Responsibilities: Develop GUI driven, Windows environment, software/hardware systems to control test equipment, data acquisition systems and similar devices, interfacing with and incorporating a variety of sensors and motors Support existing custom Python software, APIs, databases, and Linux environment Develop standalone or integrated custom data acquisition and analysis programs for a wide audience of both advanced and novice end users Design, build, maintain, and troubleshoot testing infrastructure in an efficient and organized manner Create necessary support documentation and provide training Effectively manage and prioritize a diversified workload of short term/long term projects Additional duties as required Required Qualifications: BS degree in a technical discipline with 5+ years of relevant industry experience; or MS degree with 2+ years of relevant industry experience. Experience developing software for automated test systems, scientific instrumentation, data acquisition, laboratory automation, Linux-based environments, or engineering infrastructure is strongly preferred. Proficient in Python, Linux, Docker, and related languages and systems Experience with Linux system administration, API design, container orchestration, source control management, and website design Experience in the interface and control of scientific instrumentation of automated measurements Ability to identify, analyze and resolve problems in an efficient, proactive manner Demonstrated track record of accuracy and thoroughness Ability to learn quickly in a fast-paced, entrepreneurial environment Current Benefits at UDC: Competitive base salary and annual bonus program Medical/Prescription Drug coverage, Dental, and Vision for employees and family Transit, Health and Dependent Care Flexible Spending Accounts (FSAs) Health Reimbursement Account (HRA) – An employer-paid benefit to reimburse a portion of employees’ eligible out-of-pocket medical expenses, such as deductibles, coinsurance, and pharmacy expenses Group Term Life insurance, short term disability, and long-term disability benefits for employees Employee Stock Purchase Plan (ESPP) 401(k) company contribution Ewing Worldwide Headquarters (HQ) cafeteria provides breakfast and lunch to employees at no cost to them Annual charitable matching gift Generous Paid Time Off Annual compensation range: $85k-$110k At Universal Display Corporation, base pay is one part of our total compensation package. Individual compensation is determined by skills, qualifications, experience, and location. Compensation details listed in this posting reflect the annual salary range only, and does not include bonus, equity or sales incentives, if applicable.

Job Description Job Title: Sterile Processing Technician – CWR Location: Neptune, NJ Job Type: Contract (No Benefits) Duration: 13 Weeks Shift: 11:00 AM – 5:30 PM Schedule: 5 days per week; 8 hours per day; 40 hours per week Weekends: Not Required Holidays: Not Required Floating: Not Required On-Call: Not Required Experience Required: Minimum 3 Years Certification: CRCST or CBSPD/CBSPDT Candidate Type: Local and Traveler Candidates Accepted Pay Rate Local: $800–$1,000 per week Traveler: $1,000–$1,300 per week Note: This job doesn't offer any benefits. Job Description We are seeking an experienced Sterile Processing Technician / Central Supply Technician to support sterile processing operations and operating room case cart preparation at a healthcare facility in the Neptune/Holmdel, New Jersey area. The ideal candidate will have at least 3 years of sterile processing experience, current CRCST or CBSPD/CBSPDT certification, and strong knowledge of surgical instrument decontamination, assembly, sterilization, and infection prevention procedures. Required Qualifications Minimum 3 years of Sterile Processing/Central Processing experience. High school diploma or equivalent. Completion of a Sterile Processing/Central Processing course or equivalent hands-on experience. Current CRCST or CBSPD/CBSPDT certification. Strong knowledge of surgical instrument processing and sterilization procedures. Experience with steam sterilization and familiarity with ETO, STERRAD, and STERIS systems. Knowledge of biological indicators, chemical indicators, Bowie-Dick testing, and sterilization monitoring. Experience assembling surgical instrument sets and preparing operating room case carts. Knowledge of infection prevention, Universal Precautions, PPE, and safe handling of contaminated equipment. Ability to follow manufacturer instructions for use (IFUs). Strong attention to detail and accurate documentation skills. Effective communication and collaboration skills. English proficiency, including speaking, reading, and writing. Responsibilities Receive, sort, clean, decontaminate, inspect, assemble, package, and sterilize surgical instruments and reusable medical equipment. Operate steam sterilizers, ETO sterilizers, STERRAD systems, and STERIS equipment as required. Perform and document biological testing and Bowie-Dick testing. Interpret and record biological test results and chemical indicators. Maintain accurate sterilization records, load identification, and documentation. Review sterilizer printouts and verify compliance with established procedures. Inspect surgical instruments for cleanliness, functionality, and damage. Assemble surgical instrument sets according to established procedures and physician preference cards. Prepare and organize operating room case carts with the required instruments, supplies, and equipment. Deliver completed case carts to the appropriate operating rooms. Identify missing instruments and supplies and communicate shortages to the appropriate personnel. Complete daily checklists and departmental documentation. Follow infection prevention policies, PPE requirements, and safe equipment-handling procedures. Maintain a clean, organized, and safe sterile processing environment. Collaborate with operating room staff, nurses, surgical teams, and sterile processing leadership. Perform other related duties as assigned.

Company Overview: MACOMdesigns and manufactures semiconductor products for Data Center,Telecommunication, and Industrial and Defense applications. Headquartered inLowell, Massachusetts, MACOM has design centers and sales offices throughoutNorth America, Europe, and Asia. MACOM is certified to the ISO9001international quality standard and ISO14001 environmental management standard. MACOM hasmore than 75 years of application expertise with multiple design centers, Si,GaAs, and InP fabrication, manufacturing, assembly and test, and operationalfacilities throughout North America, Europe, and Asia. View our facilities at https://www.macom.com/. Inaddition, MACOM offers foundry services that represent a key core competencywithin our business. MACOMsells and distributes products globally via a sales channel comprised of adirect field sales force, authorized sales representatives, and leadingindustry distributors. Our sales team is trained across all of our products togive our customers insights into our entire portfolio. Job Title: Assembler 2-Fiber Optic Assembler Position Overview: An Assembler 2 reads and follows diagrams to assemble andlens fiber optic cables according to product specifications. Supportsproduction and efficient machine operation under direct supervision. Familiarwith standard assembly concepts, practices, and procedures. Key Responsibilities: • Align, fit, and assembly component parts into completed units, using hand tools, power tools, fixtures, and templates., • Prepare fiber optic cable for fiber polishing and complete the polishing process to specifications., • Verify dimensions and clearances of parts to ensure conformance to blueprint specifications, using instruments, such as micrometers, calipers, and height gauges., • Examine parts for defects, repairs, reworks, and calibrate assemblies to meet operational tolerances., • Prepare work by studying assembly instructions, blueprint specifications, and parts lists, gathering parts, subassemblies, tools, and materials., • Position parts and subassemblies by using templates or reading measurements., • Maintain safe and clean work environment by complying with procedures, rules, and regulations. Key Competencies & Skills required: • High degree of dexterity., • Familiar with following travelers and standard operating procedures and follows basics of assembly drawings under direct supervision., • Experience using microscopes to inspect products and ensure the highest standard of quality., • Due to ITAR regulations, only candidates who are U.S. Persons (U.S. citizens, U.S. nationals, lawful permanent residents, or individuals granted asylum or refugee status) will be considered for this position. The Salary Range for this position is $25.00- $30.00.Actual salary offered to candidate will depend on several factors, includingbut not limited to, work location, relevant candidates' experience, education,and specific knowledge, skills, and abilities. Benefits:This position offers a comprehensive benefits package including but not limitedto: Health, dental, and vision insurance. Employer-sponsored 401(k) plan. Paid time off. Professional development opportunities. EEO: MACOMis an Equal Opportunity Employer committed to a diverse workforce. MACOM willnot discriminate against any worker or job applicant on the basis of race,color, religion, sex, gender identity, sexual orientation, national origin,age, disability, genetic information, veteran status, military service, maritalstatus, or any other category protected under applicable law. Reasonable Accommodation: MACOMis committed to working with and providing reasonable accommodations toqualified individuals with physical and mental disabilities. If you have adisability and are in need of a reasonable accommodation with respect to anypart of the application process, please call +1-978-656-2500 or _. Provide your name, phone number and the position title andlocation in which you are interested, and nature of accommodation needed, andwe will get back to you. We also work with current employees who request orneed reasonable accommodation in order to perform the essential functions oftheir jobs.

Join our team of industry leaders! Be part of our success story! Join us for an exciting opportunity to have influence, in a stable, growing organization. We currently are looking to add a full-time 1st shift All-Around Machinistto our team at our Northeast Philadelphia, PA facility. At Kingsbury, we operate with a shared purpose of creating the best product in our field while maintaining a healthy relationship with work. Who We are: Kingsbury, Inc. was founded in 1912 and is the leader in the design and manufacture of tilt-pad fluid film thrust and journal bearings for all types of rotating machinery, with thousands of installations worldwide. The Company is comprised of a Corporate office (Philadelphia, PA), two (2) manufacturing facilities (Philadelphia, PA and Oshkosh, WI) and two (2) repair and service facilities (Philadelphia, PA and Yuba City, CA) located in the United States. In addition, Kingsbury has one (1) manufacturing facility located in Gttingen Germany. Why work at Kingsbury? • Company Paid Vision and Dental, • Health Club Reimbursement, • Tuition Reimbursement, • Proven record of promoting from within, • Competitive vacation for new hires, • Team Environment, • And many more reasons to come work with us! As the All-Around Machinist, the team member will: • Studies sample parts, blueprints, drawings, and engineering information to determine methods and sequence of operations to fabricate product., • Operates metalworking machine tools to machine parts to specifications., • Fabricates, assembles, and modifies tooling to produce parts and assemblies., • Lays out and verifies dimensions of parts, using precision measuring and marking instruments and knowledge of trigonometry., • Calculates and sets controls to regulate machining, or enters commands to retrieve, input, or edit computerized machine control media., • Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials onto machines., • Measures, examines, and tests completed units to detect defects and ensure conformance to specifications utilizing the latest measurement equipment and other inspection technologies., • Observes and listens to operating machines or equipment to diagnose machine malfunction and determine need for adjustment or repair., • Cuts and shapes metal to specified shape., • Establishes work procedures for fabricating new structural products, using a variety of metalworking machines., • Confers with engineering, supervisory, and manufacturing personnel to exchange technical information. Abilities and Other Skills • Product Inspection - Inspecting and evaluating the quality of products utilizing the latest inspection tools and techniques as required., • Operation and Control - Controlling operations of equipment or systems., • Mathematics - Using mathematics to solve problems., • Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly., • Operations Analysis - Analyzing needs and product requirements to create a design., • Equipment Selection - Determining the kind of tools and equipment needed to do a job, • Troubleshooting - Determines cause of operation error and decides what to do., • Problem Identification - Identifying the nature of problems., • Active Learning - Working with new material or information to grasp its implications., • Solution Appraisal - Observing and evaluating the outcomes of a problem solution to identify lessons learned or redirect efforts., • Time Management - Managing one's own time., • Reading Comprehension - Understanding written sentences and paragraphs in work related documents. Required Education and Experience • High school diploma or General Education Degree (GED); or two to three years related experience; or equivalent combination of education and experience. Kingsbury, Inc. is proud to be an equal opportunity, affirmative action employer. All employment decisions are based on merit without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Warehouse Associate Equipment Operator (Cherry Picker) Cranbury, New Jersey Full-time & Part-time Earn $22.75$24.75/hour in 34 day work weeks with multiple day and night shifts available. Eligible for up to a $1,400 bonus in Q4 2026. No resume required, fast, simple application, apply in minutes. Join Wayfair's warehouse team operating order picker/cherry picker equipment to move customer orders safely and fast. Why You'll Love This Job Competitive pay, paid weekly, plus overtime and shift premiums plus eligible for up to a $1,400 bonus in Q4 2026 Day-one medical/dental/vision, 401(k) match, PTO, tuition reimbursement, employee discounts and perks Full certification and safety training provided Real path into lead and operations roles What You'll Do Operate order pickers, pallet jacks, and related equipment to pick, move, and stage furniture and home goods Lift up to 75 lbs solo and maneuvering products up to 150 lbs unassisted Use handheld scanners/tablets to locate, pick, and update orders Inspect, assemble and prep large product so it arrives damage-free What You'll Bring 6+ months of experience on a cherry picker/order picker (required) Comfortable operating equipment at heights up to 40 ft Able to stand, bend, and lift throughout a full shift Comfortable using scanners/tablets and reading instructions in English Youll do great at Wayfair if you like staying active all shift, feel confident on equipment, being part of a team and want stable, well-paid warehouse work. Assistance for Individuals with Disabilities Wayfair is fully committed to providing equal opportunities for all individuals, including individuals with disabilities. As part of this commitment, Wayfair will make reasonable accommodations to the known physical or mental limitations of qualified individuals with disabilities, unless doing so would impose an undue hardship on business operations. If you require a reasonable accommodation to participate in the job application or interview process, please let us know by completing our _. Need Technical Assistance? For more information about applying for a career at wayfair, visit our _. About Wayfair Inc. Wayfair is one of the worlds largest online destinations for the home. Whether you work in our global headquarters in Boston, or in our warehouses or offices throughout the world, were reinventing the way people shop for their homes. Through our commitment to industry-leading technology and creative problem-solving, we are confident that Wayfair will be home to the most rewarding work of your career. If youre looking for rapid growth, constant learning, and dynamic challenges, then youll find that amazing career opportunities are knocking. No matter who you are, Wayfair is a place you can call home. Were a community of innovators, risk-takers, and trailblazers who celebrate our differences, and know that our unique perspectives make us stronger, smarter, and well-positioned for success. We value and rely on the collective voices of our employees, customers, community, and suppliers to help guide us as we build a better Wayfair and world for all. Every voice, every perspective matters. Thats why were proud to be an equal opportunity employer. We do not discriminate on the basis of race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, genetic information, or any other legally protected characteristic. Your personal data is processed in accordance with our Candidate Privacy Notice (https://www.wayfair.com/careers/privacy). If you have any questions or wish to exercise your rights under applicable privacy and data protection laws, please contact us at dataprotectionofficer@wayfair.com.

Company Overview: MACOMdesigns and manufactures semiconductor products for Data Center,Telecommunication, and Industrial and Defense applications. Headquartered inLowell, Massachusetts, MACOM has design centers and sales offices throughoutNorth America, Europe, and Asia. MACOM is certified to the ISO9001international quality standard and ISO14001 environmental management standard. MACOM hasmore than 75 years of application expertise with multiple design centers, Si,GaAs, and InP fabrication, manufacturing, assembly and test, and operationalfacilities throughout North America, Europe, and Asia. View our facilities at https://www.macom.com/. Inaddition, MACOM offers foundry services that represent a key core competencywithin our business. MACOMsells and distributes products globally via a sales channel comprised of adirect field sales force, authorized sales representatives, and leadingindustry distributors. Our sales team is trained across all of our products togive our customers insights into our entire portfolio. Job Title: Assembler 2-Fiber Optic Assembler Position Overview: An Assembler 2 reads and follows diagrams to assemble andlens fiber optic cables according to product specifications. Supportsproduction and efficient machine operation under direct supervision. Familiarwith standard assembly concepts, practices, and procedures. Key Responsibilities: • Align, fit, and assembly component parts into completed units, using hand tools, power tools, fixtures, and templates., • Prepare fiber optic cable for fiber polishing and complete the polishing process to specifications., • Verify dimensions and clearances of parts to ensure conformance to blueprint specifications, using instruments, such as micrometers, calipers, and height gauges., • Examine parts for defects, repairs, reworks, and calibrate assemblies to meet operational tolerances., • Prepare work by studying assembly instructions, blueprint specifications, and parts lists, gathering parts, subassemblies, tools, and materials., • Position parts and subassemblies by using templates or reading measurements., • Maintain safe and clean work environment by complying with procedures, rules, and regulations. Key Competencies & Skills required: • High degree of dexterity., • Familiar with following travelers and standard operating procedures and follows basics of assembly drawings under direct supervision., • Experience using microscopes to inspect products and ensure the highest standard of quality., • Due to ITAR regulations, only candidates who are U.S. Persons (U.S. citizens, U.S. nationals, lawful permanent residents, or individuals granted asylum or refugee status) will be considered for this position. The Salary Range for this position is $25.00- $30.00.Actual salary offered to candidate will depend on several factors, includingbut not limited to, work location, relevant candidates' experience, education,and specific knowledge, skills, and abilities. Benefits:This position offers a comprehensive benefits package including but not limitedto: Health, dental, and vision insurance. Employer-sponsored 401(k) plan. Paid time off. Professional development opportunities. EEO: MACOMis an Equal Opportunity Employer committed to a diverse workforce. MACOM willnot discriminate against any worker or job applicant on the basis of race,color, religion, sex, gender identity, sexual orientation, national origin,age, disability, genetic information, veteran status, military service, maritalstatus, or any other category protected under applicable law. Reasonable Accommodation: MACOMis committed to working with and providing reasonable accommodations toqualified individuals with physical and mental disabilities. If you have adisability and are in need of a reasonable accommodation with respect to anypart of the application process, please call +1-978-656-2500 or _. Provide your name, phone number and the position title andlocation in which you are interested, and nature of accommodation needed, andwe will get back to you. We also work with current employees who request orneed reasonable accommodation in order to perform the essential functions oftheir jobs.

Job Description At Universal Display Corporation (Nasdaq: OLED) (UDC), we’re changing the way people see the world. If you’re reading this on a smartphone, there’s a good chance UDC’s materials are producing the light and color shining from your screen right now. UDC’s OLED ingredients are key parts of stunning, energy-efficient displays used in everything from smartwatches to phones, tablets, laptops, monitors, TVs and automobiles. Virtually every OLED consumer electronics product around the world uses UDC’s phosphorescent OLED materials and technologies. UDC is a publicly traded company and pioneer in the OLED industry. When you join our global team, you are embarking on a journey at the forefront of display technology and organic electronics that impacts the daily lives of people around the world. From engineers to chemists, Ph.D. scientists, technicians, lawyers and more, our UDC team is continuously advancing our field. With a focus on energy efficiency, UDC’s team is contributing to making a better, more sustainable planet. Please visit us at www.oled.com. Job Summary: The Patent Attorney/Agent will work under the supervision of the VP, Corporate IP Technology and will provide legal guidance to support the company’s business and research activities. This role will work with the rest of the patent team and together with our R&D teams to assist in the preparation and development of patent applications to protect the company’s Intellectual Property. This includes performing prior art searches; identifying patentable inventions; assisting with worldwide patent prosecutions; securing high quality patents; developing patent strategies, and working with the R&D organization to understand priorities and challenges. Key Responsibilities: Manage the intake of invention disclosures and review disclosures for patentability, novelty, and non-obviousness Perform prior art searching Evaluate qualification and applicability of prior art Investigate inventorship issues Draft new patent applications Prosecute US and foreign patent applications Other responsibilities and key result areas will be assigned as required Qualifications: Demonstrated at least five years of experience focusing on patent drafting, filing and prosecuting patent applications Degrees in Chemistry and either Physics or Electrical Engineering, and possess an MS or PhD in at least one of these areas. Extensive expertise in OLED device technology or a closely related discipline is required Strong understanding of both chemistry and physics and their use in electronic devices Experience using a variety of search engines and databases, for example, SciFinder, USPTO, WIPO, EPO database systems, etc. Creative and diligent literature searching skills Ability to work independently and proactively with minimal direction Ability to connect scientific details of research projects with patentability considerations; Strong organizational skills, keen attention to detail, and ability to prioritize projects and meet deadlines Strong writing and presentation skills Registration to practice before the U.S. Patent and Trademark Office (USPTO) Current Benefits at UDC: Competitive base salary and annual bonus program Medical/Prescription Drug coverage, Dental, and Vision for employees and family Option of Health and Dependent Flexible Spending Accounts (FSAs) Option of Health Savings Account (HSA) Group Term Life insurance, short term disability, and long-term disability benefits for employees Employee Stock Purchase Plan (ESPP) 401(k) company contribution Ewing Worldwide Headquarters (HQ) cafeteria provides breakfast and lunch to employees at no cost to them Annual charitable matching gift Generous Paid Time Off Annual compensation range: $135k-180k

Job Description **Job Title: ** **Entry Level Engineer ** **Department: ** **Engineering ** **Reports To: ** **Job title (not manager’s name) ** **Location: ** **275 Lower Morrisville Road Levittown, PA 19054 ** **FLSA Status: ** **Non-Exempt ** **Compensation: ** $70,000 - $80,000 | | | | **Description ** Entry Level Engineer supports the manufacturing engineering team by developing practical mechanical solutions, creating and maintaining engineering drawings, and assisting with automation and process improvement initiatives. This hands-on role works closely with Production, Maintenance, and Operations to improve manufacturing efficiency, safety, quality, and reliability. The position is well suited for a recent engineering graduate who is eager to build plant-floor experience in a fast-paced manufacturing environment and contribute to meaningful improvements from day one. **Key Responsibilities ** Create and update design drawings, layouts, and mechanical concepts using CAD software. Engineer mechanical solutions that improve manufacturing efficiency, safety, and quality. Support the implementation and troubleshooting of automation projects on the plant floor. Partner with Production, Maintenance, and Operations to identify and implement process improvements. Document manufacturing processes, standard operating procedures (SOPs), and engineering changes. Collect and analyze process data and recommend solutions to reduce downtime and waste. Assist with equipment installations, modifications, and validation activities. **Qualifications ** Education: Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related field; recent graduates are welcome. Experience: 0–2 years of engineering or manufacturing experience. Manufacturing-environment exposure is preferred. Technical Skills: Proficiency in Microsoft Office; CAD experience with SolidWorks, AutoCAD, or similar software is preferred. Industry Exposure: Familiarity with slitting, sheeting, die press, converting, silicone coating, hot melt, or automation is preferred. Licenses/Certifications: None specified. **Knowledge, Skills, and Abilities ** Basic understanding of mechanical design, pneumatics, conveyors, and controls. Strong analytical and problem-solving skills with the ability to translate observations and data into practical solutions. Hands-on mindset and willingness to work directly on the plant floor. Strong verbal and written communication skills. Ability to collaborate effectively across Engineering, Production, Maintenance, and Operations. Interest in manufacturing, converting operations, equipment improvement, and automation. **Physical Requirements ** Ability to lift up to 40 pounds. Ability to work in a manufacturing environment and perform duties on the plant floor. **What We Offer ** ** ** Hands-on training and mentorship from the Engineering Manager. Exposure to multiple manufacturing processes and automation projects. Opportunity to contribute to real process and equipment improvements from day one. **Equal Employment Opportunity Statement ** The Griff Network is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, national origin, age, disability, or any other protected status. You should be proficient in: • Soldering, • Single and Three Phase Power, • 120/208/240/480 Voltage Systems, • Motor Replacement/Repair/Maintenance, • Electrical Installation, • Electrical Repair, • PLC Programming Experience, • Electrical / Electronic Systems, • Industrial Electrical Experience, • Lockout/Tagout (LOTO), • Electrical Schematic Reading, • Engineering Degree Machines & technologies you'll use: • Variable Frequency Drives (VFD), • CAD Software, • Programmable Logic Controller (PLC) (Siemens, Schneider Electric, Beckoff, Allen Bradley)

Job Description About E-J: The E-J Group is active in all facets of electrical contracting, bringing experience, expertise, and a national reputation to projects that range in size up to more than $300 million. With over 4,000 employees across 31 offices, E-J delivers full-service electrical solutions for rail systems, transit facilities, office buildings, hospitals, power, renewable energy, clean energy, co-generation facilities, roadway and outdoor specialty work, airports, industrial facilities, data centers, chip plants, universities, sports stadiums, extra high voltage distribution, utility, and gas infrastructure. At E-J, three generations of family expertise have built an organization that combines practical knowledge with modern technological innovation, providing rapid and efficient solutions for today’s lighting, power, energy, and communication needs. E-J has over a 125-year reputation for integrity, quality, and exceptional service in the electrical field. To learn more, visit www.ej1899.com. Title/Role: Field Engineer Division: Major Projects Location: Fairless Hills, PA Reporting to: Position Summary: E-J is seeking motivated and detail-oriented Assistant Project Managers/Field Engineers to support the execution of large-scale data center electrical construction projects. These are hands-on, field-facing roles working at the intersection of electrical engineering and construction, ensuring that electrical installations are built in accordance with design documents, project schedules, and the exacting quality standards required in mission-critical environments. The ideal candidates bring 1–5 years of electrical construction or field engineering experience and are comfortable working in dynamic, fast-paced hyperscale or co-location data center environments alongside craft labor, project managers, general contractors, and commissioning teams. What You’ll Do: • Support the Project Manager in day-to-day field coordination and execution of data center electrical scopes, • Interpret and work from electrical construction drawings, single-line diagrams, specifications, and equipment submittals, • Monitor field installations for compliance with contract documents, NEC code, and applicable project specifications, • Coordinate with the general contractor, other trades, and MEP engineers to resolve conflicts and maintain the schedule in a concurrent-trade environment, • Track and manage RFIs, submittals, and field change notices; maintain organized and up-to-date documentation, • Assist with procurement follow-up and delivery tracking for critical equipment, including switchgear, transformers, UPS systems, generators, PDUs, and bus duct, • Support phased energization planning and coordination with commissioning agents and the owner’s technical teams, • Conduct regular field walks to document progress, identify issues, and verify the quality of installation, • Maintain accurate daily field reports, quantity tracking logs, and schedule look-aheads, • Assist in quantity takeoffs, cost tracking, and subcontractor coordination as directed by the Project Manager, • Participate in project meetings, including coordination meetings, OAC meetings, and safety briefings, • Enforce E-J’s safety standards and site-specific safety plans; ensure compliance with NFPA 70E requirements for work on or near energized systems, • Support closeout activities, including punch list management, as-built documentation, and final commissioning walkthroughs Qualifications & Skills: • 1–5 years of field engineering or electrical construction experience, preferably on large commercial or mission-critical projects, • Bachelor’s degree in engineering, construction management, or a related technical field; equivalent field experience considered, • Proficiency in reading and interpreting electrical construction drawings, specifications, and equipment submittals, • Working knowledge of the National Electrical Code (NEC) and electrical construction best practices, • Proficiency in Microsoft Office Suite; experience with Procore, Bluebeam, or similar construction management platforms a plus, • Strong organizational skills and attention to detail, with the ability to manage multiple open items simultaneously, • Effective written and verbal communication skills; comfortable coordinating with field crews, subcontractors, and engineering staff, • Ability to work full-time on a construction site and meet the physical demands of a field-based role Nice to Haves: • Experience on Tier III or Tier IV hyperscale or co-location data center projects, • Familiarity with critical power systems, including 2N redundancy architectures, static transfer switches, and PDU configurations, • Exposure to integrated systems testing (IST) or commissioning processes for mission-critical facilities, • Knowledge of BICSI, Uptime Institute, or TIA-942 standards, • Experience with BIM coordination or 3D clash detection in a multi-trade environment, • OSHA 30 certification Advantages of Working at E-J: • Leading Electrical Contracting Organization Nationwide, • Oldest Family-Owned and Operated Electric Contractor since 1899, • Job training and mentorship, • Competitive compensation packages, • Comprehensive benefits, including medical, dental, and 401K plan, • Paid holidays and vacation, • Merit-Based Bonus, • Tuition Reimbursement Program Salary Range: $75k-$105k/year The E-J Group is an Equal Employment Opportunity Employer and ensures equal employment opportunity for all persons without discrimination on the basis of race, color, religion, sex, sexual orientation, national origin, age, disability, marital status, citizenship, or any other characteristic protected by law. Powered by JazzHR E3SU6BrmGe

Job DescriptionBenefits: • Paid time off $18/hour | Flexible Schedule | Meaningful Work Greetings everyone. My name is Claire. I am posting here today with the hopes of meeting six people. The people who can be described as people with heart and people with passion but more on that in a minute. You see, there is a story behind my work and this post and here it goes. I am an educator and former school principal turned nurse, turned nurse entrepreneur and geriatric wellness expert. Yes, education was my first love and my second love is nursing. If you ask my mother, she would tell you that I have never met a stranger. I was that girl who would go down the street to find someone to help and would stop and carry the groceries for the elderly neighbor and feed all the stray cats and lonely dogs that I could find. During nursing school, I developed a true inquiring mind, and I could not sit still because I was pulled by various areas of health care. I worked in a long-term care community and I soon became pulled by the emotional and psychosocial needs of most older adults who live in long term care. Many of them are sad and although they are amongst others, many feel lonely and left behind. I made myself a promise that I would take interest in those older adults and find a way to make them smile and feel happy even if it was just for a short time. Through all my work seasons as a former teacher, a school principal, a nurse, a clinical chaplain, and now, a nurse entrepreneur, one truth has never changed: people need human connection. That’s why I started this program — to bring kindness, laughter, and companionship to older adults in nursing homes and long-term care centers. So, here is where you come in. I am in search of people with heart, and people with passion. I call these people Resident Comfort Specialists, and their job is simple yet life-changing: to bring joy and comfort to someone who feels forgotten. The job is very simple and very fulfilling. As a Resident Comfort Specialist, you might spend your day with a resident doing any or all of the following: • Reading or telling stories, • Watching a favorite TV show together, • Singing along to old songs, • Decorating a small tabletop Christmas tree, • Or simply sitting beside someone who needs companyAnd yes — you’ll be paid $18 an hour for this beautiful work. It’s a job that fills your heart as much as your bank account. All you need are three things: • A degree in compassion. This is supposed to make your laugh because there is no degree in Compassion. You just need to be kind and gentle., • A clean background check, • Your ID and Social Security number (so we can pay you!)We’ll introduce you to the care team at the facility, guide you through the process, and help you start making a difference right away. If you’ve been looking for work that truly means something — this is it. You’ll be paid to make someone smile. And you’ll go home knowing you helped another human being feel seen, valued, and loved. Come join our team of compassionate companions. We can’t wait to meet you. Please respond with a good phone number and an email that you check regularly Thanks and wishing you a beautiful week ahead.

Job Description Machine Operator | 1st Shift | Ewing NJ We’re hiring a reliable Machine Operator to join our manufacturing team at USA Tolerance Rings, the only domestic producer of Tolerance Rings in the country! As a Machinist, you’ll work hands‐on in a safety‐focused facility producing high‐precision steel rings for various applications in Aerospace, automotive, and more. Join a skilled team where attention to detail directly shows up in the quality of what ships out of our door. What You’ll Do: • Set up and operate production machinery to make precision tolerance rings, • Load raw materials and monitor machines during production runs, • Perform in‐process quality checks using measuring tools, • Follow engineering drawings and work instructions to craft tolerance rings in accordance with request, • Identify defects and rework parts as needed, • Record production and inspection information, • Perform routine machine cleaning and maintenance What We're Looking For: • 3 - 5 years of relevant experience in a manufacturing environment required, working in the bearing industry strongly preferred, • Previous experience with steel forming, stamping, or tolerance ring production, • Basic ability to add, subtract, multiply, and divide using all units of measure, including whole numbers, fractions, and decimals, • Experience using measurement tools for precision such as calipers, micrometers, and gauges, • Comfortable reading basic engineering drawings and translating them into correct machine setup and operation, • Reliable, eager to learn, and detail-oriented, with a genuine willingness to learn the craft rather than rush the process Compensation & Benefits: • Closed between Christmas and New Year’s Eve, • 3 Weeks PTO including paid Sick leave in accordance with NJ Sick Leave., • Company Paid Holidays including a floating holiday, • Health Coverage (medical, dental) with 75% employer contribution., • Group Life & LTD Coverage: provided at 100% employer contribution, • 401(k) Retirement Plan Company contribution after 6 mos. employment., • Pay Range: $23 - $30/hour depending on experience At USA Tolerance Rings, our machinists make the difference. This role is ideal for someone who enjoys working with machines, values precision, and wants to build long‐term skills in manufacturing. If you’re eager to learn, we encourage you to apply even if you don’t meet every requirement. \nCompany Description USA Tolerance Rings, a division of General Sullivan Group, Inc., is the only domestic producer of tolerance rings in the United States. Founded in 1961, the company has built a reputation for precision manufacturing, custom-engineered solutions, and dependable service across a wide range of industries. All products are manufactured in-house at our New Jersey facility by skilled technicians, ensuring exceptional quality control, fast turnaround times, and reliable domestic sourcing. USA Tolerance Rings, a division of General Sullivan Group, Inc., is the only domestic producer of tolerance rings in the United States. Founded in 1961, the company has built a reputation for precision manufacturing, custom-engineered solutions, and dependable service across a wide range of industries. All products are manufactured in-house at our New Jersey facility by skilled technicians, ensuring exceptional quality control, fast turnaround times, and reliable domestic sourcing.

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! We are seeking experienced Fire Alarm/Intrusion/Burglar Installation Technicians to join our growing team. This role involves installing, troubleshooting, and maintaining fire alarm systems across various commercial and retail locations nationwide. Ideal candidates will have strong technical skills, a commitment to safety, and the flexibility to travel extensively. We seek self-motivated and reliable technicians who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Why Wachter? • Full-time work, • Competitive Compensation based on experience, • Paid weekly, • Per-Diem paid when overnight travel is required, • Company vehicle provided, in some cases, after initial 2-4 weeks of employment, • Drive time and mileage paid for use of personal vehicle when travel is required, • Paid Vacation and Holidays, • Opportunities for certification and career advancement, • Supportive team environmentBenefits Package- Company Paid!, • Medical, Dental, Prescription & Vision Benefits, • Life, AD&D, and LTD insurance, • Paid Vacation and Holidays, • Company-Matched 401(k) and IRA Retirement Savings.Key Responsibilities:, • Installation, troubleshooting, and maintenance of fire alarm systems infrastructure., • Running low-voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work., • Installing cable support structures such as j-hooks, cable racks, and innerduct., • Conducting tests to ensure all newly installed cable systems and component devices are operational., • Troubleshooting issues with cable networks and fire alarm panels., • Ensuring all installations and repairs comply with NFPA standards, including NFPA 70 and 72., • Collaborating with team members on pre-installation design and planning., • Maintaining accurate and detailed records of all work performed., • Adhering to all required project safety requirements as set forth by Wachter, our customers, or OSHA.Qualifications:, • Proven experience in field installation within security and life safety environments: Fire Alarm and/or Intrusion., • In-depth knowledge of NFPA standards, especially NFPA 70 and 72., • Experience reading blueprints and site maps., • Comfortable working at heights of 20–60 feet using lifts., • Ability to work in cramped spaces and operate BOOM or scissor lifts., • Proficiency with smartphones, computers, email, spreadsheets, and Microsoft Office., • Possession of basic PPE and reliable transportation during the initial training period., • Valid driver’s license with a clean driving record (no DUI/DWI in the last 3 years)., • Availability for extensive travel (2–6 weeks at a time) and flexible shifts including nights and on-call work.Preferred Qualifications:, • Knowledge of cabling infrastructure and conduit installation, • NICET Level 2 certification or State-required licenses., • Ability to identify independent colors and learn color codes., • Experience with multiple Intrusion and Fire system manufacturers. Join our team and earn up to a $15,000 signing bonus based on experience and licenses, plus extra pay incentives for night shifts! Wachter is a family-owned company since 1930 and we see each employee as a critical piece of the Wachter Family. With over 900 licenses across the country, Wachter serves commercial and industrial clients with the right technologies needed to keep them successful. We design, install, and maintain the technologies that keep businesses operating efficiently. Our team of dedicated electricians, engineers, and technicians provides electrical, data, security, communications, and automation services to clients in numerous industries. Follow us on Facebook, Instagram, Twitter, and LinkedIn. We're an equal opportunity employer. All applicants will be considered for employment without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionMAJOR FUNCTION The primary purpose of the Pharmacy Technician is to assist the Pharmacist-In-Charge and Clinical Pharmacist in the daily operations of the Pharmacy, including serving patients and maintaining the pharmacy department. He/she will be responsible for greeting guests, providing excellent customer service, and assisting the pharmacists with accurate, safe, and efficient preparation and dispensing of pharmaceutical orders in accordance with state and federal laws and regulations. ESSENTIAL FUNCTIONS • Greets guests and provides excellent customer service., • Helps healthcare professionals and patients by greeting them in person and by phone; answering questions and requests; referring inquiries to the pharmacist., • Assists pharmacists to help ensure the pharmacy is running efficiently., • Assists Lead Pharmacy Technician to help ensure the pharmacy runs efficiently., • Accepts accurate patient and prescription order information necessary to process new and refill medications., • Maintains records by recording and filing prescriber orders and prescriptions and performs computer entries of prescription information., • Organizes medications for the pharmacist to dispense by reading medication orders and prescriptions; preparing labels; calculating quantities; and assembling pharmaceutical therapies., • Retrieves the appropriate medication from inventory., • Creates prescription labels, including selection of appropriate auxiliary labels, to be affixed to prescription containers., • Places medications in containers and affixes prescription labels., • Prepares unit dose packaging, when appropriate., • Prepares compounded stock medication, when appropriate., • Generates revenue by calculating, recording, issuing, and collecting charges., • Maintains pharmacy inventory by checking pharmaceutical stock to determine inventory level; anticipating needed medications and supplies; placing and expediting orders; verifying receipt; removing outdated drugs., • Protects patients and employees by adhering to infection-control policies and protocols., • Maintains a safe and clean pharmacy by complying with procedures, rules, and regulations., • Responsible for promoting joy in the workplace to achieve organizational goals, mission and vision. REQUIREMENTS: EDUCATION & EXPERIENCE: • Required:, • High school diploma or equivalent, • New Jersey Board of Pharmacy Technician registration, • 1 year of experience as pharmacy technician, • Preferred:, • Associates degree, • New Jersey Board of Pharmacy Certified Technician, • New Jersey Board of Pharmacy Registered Technician, • 5 or more years of experience as pharmacy technician, • Bilingual (Spanish) LICENSURE AND/OR CERTIFICATIONS: • New Jersey Board of Pharmacy Certified TechnicianKNOWLEDGE, SKILLS, ABILITIES AND OTHER (KSAO’s), • High energy and enthusiasm, positive, “can-do” attitude with a high degree of initiative, • Excellent customer service skills, • Must be able to work in a team and collaborative environment, • Understanding of federal HIPPA rules and ability to maintain patient confidentiality, • Ability and willingness to perform duties with purpose and strong sense of urgency, • Ability to organize and prioritize tasks/projects, • Familiarity with State and Federal pharmacy laws and regulations, • Knowledge of brand and generic drug names, • High attention to detail, • Must be proficient in basic math skills, • Must be capable of operating cash register, • Demonstrated ability to use Microsoft Office applications, including Microsoft Word, Outlook, and Excel PHYSICAL & WORK REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position requires the manual dexterity sufficient to operate phones, computers and other office equipment. The position requires the physical ability to kneel, bend, and perform light lifting. This person must have the ability to write and speak clearly using the English language to convey information and be able to hear at normal speaking levels both in person and over the telephone. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus. Generally, the working conditions are good with little or no exposure to extremes in health, safety hazards and/or hazardous materials. Powered by JazzHR wFmn1PbMVV

Job Description At Universal Display Corporation (Nasdaq: OLED) (UDC), we’re changing the way people see the world. If you’re reading this on a smartphone, there’s a good chance UDC’s materials are producing the light and color shining from your screen right now. UDC’s OLED ingredients are key parts of stunning, energy-efficient displays used in everything from smartwatches to phones, tablets, laptops, monitors, TVs and automobiles. Virtually every OLED consumer electronics product around the world uses UDC’s phosphorescent OLED materials and technologies. UDC is a publicly traded company and pioneer in the OLED industry. When you join our global team, you are embarking on a journey at the forefront of display technology and organic electronics that impacts the daily lives of people around the world. From engineers to chemists, Ph.D. scientists, technicians, lawyers and more, our UDC team is continuously advancing our field. With a focus on energy efficiency, UDC’s team is contributing to making a better, more sustainable planet. Please visit us at www.oled.com. Job Summary: The EHS Senior Manager provides Site leadership and strategic direction for Environmental, Health, and Safety programs at the Ewing NJ Campus. The EHS Senior Manager leads and develops the EHS team for the Ewing location and supports global policy standardization and risk mitigation programs. This role is accountable for developing and executing a unified EHS vision that aligns with corporate objectives, regulatory requirements, and industry best practices as well as subject matter expertise to the UDC global EHS program. This position also plays a critical role in building the next generation of EHS leaders, fostering innovation, and championing continuous improvement initiatives that deliver measurable business impact. Key Responsibilities: Establish, maintain, and continuously improve the site EHS management system, including governance, annual objectives, documented procedures, internal audits, management reviews, corrective action tracking, and alignment with applicable ISO 14001 and ISO 45001 principles. Support the Global Director Facilities & EHS in developing the global EHS policies, procedures, and performance standards across all sites. Benchmark against industry leaders to identify and adopt innovative safety and environmental and sustainability practices. Identify, mentor, and develop high-potential EHS talent across sites. Ensure compliance with applicable OSHA, EPA, NJDEP, local regulatory requirements governing chemical hygiene, hazardous materials management, air emissions, wastewater discharges, hazardous waste, laser safety, radiation safety, and emergency planning. Maintain key performance indicators and proactive metrics for EHS dashboards to enhance program performance. Serve as the primary EHS liaison to local site leadership, local functional leaders, and external local, state and federal regulatory agencies. Ensure prompt reporting and investigation of injuries, illnesses, environmental events, near misses, and high-potential incidents; facilitate root-cause analysis, assign corrective actions, verify effectiveness, and communicate lessons learned across relevant sites. Establish and oversee EHS training and competency program that addresses regulatory requirements, high-risk work, laboratory and R&D activities, contractor orientation, refresher training, and verification of employee understanding and field application. Integrate proactive, data driven sustainability practices into business operations Drive continuous improvement initiatives to enhance safety performance, reduce environmental impact, and improve operational efficiency. Provide EHS oversight for the design, modification, commissioning, and startup of laboratories, pilot areas, and research support systems, including review of fume hoods, local exhaust ventilation, gas detection, emergency power, chemical storage, fire protection, and emergency equipment. Partner with business leaders to integrate EHS considerations into strategic planning, capital projects, and new product introductions. Required Qualifications: Bachelor’s degree in Environmental Science, Occupational Health & Safety, Engineering, Industrial Hygiene, or related field. Minimum of seven (7) years of direct EHS experience supporting chemical laboratory, research and development, or advanced materials environments, including responsibility for laboratory safety, chemical hygiene, hazardous materials, and hazard operations. Professional certifications such as CSP (Certified Safety Professional), CIH (Certified Industrial Hygienist), CHMM (Certified Hazardous Materials Manager), or equivalent. Demonstrated expertise applying OSHA, EPA, NJDEP, and local regulatory requirements in chemical laboratory and R&D environments, including chemical hygiene, hazardous materials, hazardous waste, air emissions, wastewater, emergency planning, and regulatory inspections. Proven track record of developing and executing EHS strategies that deliver measurable performance improvements. Demonstrated experience leading the implementation, maintenance, and continual improvement of ISO 14001 and ISO 45001 management systems, including internal audits, management reviews, corrective action management, risk-based planning, and direct support for third-party certification and surveillance audits. Strong leadership skills with experience managing and developing EHS leaders. Excellent communication, facilitation, and stakeholder engagement skills across multiple levels and geographies. Demonstrated success in standardizing EHS policies and systems across complex matrixed organizations Current Benefits at UDC: Competitive base salary and annual bonus program Medical/Prescription Drug coverage, Dental, and Vision for employees and family Option of Health and Dependent Flexible Spending Accounts (FSAs) Option of Health Savings Account (HSA) Group Term Life insurance, short term disability, and long-term disability benefits for employees Employee Stock Purchase Plan (ESPP) 401(k) company contribution Ewing Worldwide Headquarters (HQ) cafeteria provides breakfast and lunch to employees at no cost to them Annual charitable matching gift Generous Paid Time Off Annual compensation range: $140k-160k At Universal Display Corporation, base pay is one part of our total compensation package. Individual compensation is determined by skills, qualifications, experience, and location. Compensation details listed in this posting reflect the annual salary range only, and does not include bonus, equity or sales incentives, if applicable.