Writing jobs in Cincinnati, OhioCreate job alerts

Responsibilities: Essential Duties and Responsibilities include the following. Other duties and tasks may be assigned. • Demonstrate effective use of supplies and staff labor hours., • May assist with billing log preparation and updates., • Perform duties as assigned to meet the patient care or operational needs of the clinic, • Obtain blood samples for laboratory analysis as required to complete physician orders., • Complete and document monthly review of patient medication profiles., • Knowledge of and comply with applicable health care professionals practice act requirements., • Perform duties at all times under the supervision of a Charge Nurse and within limitations established by and in accordance with company policy and procedures, applicable state and federal laws and regulations, • Maintain thorough, accurate, and appropriate documentation in the patient record of all treatments, activities, and communication with the patient, physician and other healthcare professionals to include progress reports., • Report any significant information or change in patient condition to the Charge Nurse., • Report machine problems to Biomedical Technician and Administrator., • Participate in staff meetings as required. Attend in-service and continuing education offerings in compliance with company policy and procedure., • Assist with staff training as requested. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Requirements include: • Current LVN/LPN license in applicable state. License must be maintained as current and in good standing., • CPR certification required within 90 days of hire., • Confirmation of ability to distinguish all primary colors., • Previous dialysis experience preferred., • Successful completion of USRC training program approved by the Medical Director, including demonstrated competency, within 8 weeks of hire., • Demonstrated working knowledge of the English language and ability to communicate verbally and in writing., • Must be able to organize time and tasks well., • Must have basic computer skills; proficiency in all USRC clinical applications required within 90 days of hire., • Must meet any practice requirement(s) for the applicable state. Benefit Details All Full-Time employees are eligible for the following benefits: • Medical / Pharmacy, • Dental, • Vision, • Voluntary benefits, • 401k with employer match, • Virtual Care, • Life Insurance, • Voluntary Benefits, • PTO All Part Time employees are eligible for the following benefits: • 401k with employer match, • PTO Company (Career Site Brand): U.S. Renal Care

Job Overview: Ready to take the next step in your career? Marvin is looking for a Computer Numerically Controlled (CNC) Programmer to develop and maintain the programs that drive the production of our windows and doors. In this role, you'll support our Made-to-Order Department by creating and optimizing CNC programs using industry-leading software, implementing engineering changes, and helping bring unique customer designs to life. If you're looking to join a supportive team that values growth and development, we invite you to apply. Highlights of your role: • Responsible for the development and/or maintenance of computer numerically controlled (CNC) programs to be used for automating equipment using computer generated electronic data Facilitate generation of the month scorecards, weekly status reports and planning documents., • Develop and implement CNC programs for standard products utilizing AlphaCam, InventorCam, and Xilog programming software Assist in organizing and preparing for Strategic Business Council meetings., • Develop and implement CNC programs for unique customer requested door product designs, create and revise programs as required to implement ECNs, and evaluate current CNC program designs to develop better design solutions implementing new CNC programming for those designs (parametric methods, file and data organization,Attend staff meetings to record minutes and complete other assigned tasks., • Responsible for the review and release of special orders from GCOD hold, assist with the preparation of samples and CNC operations for pilot runs for new product launches and assist launch teams during those pilots. Actively participate on improvement teams and generate new ideas to be pursued for product improvementMaintain excellent organization skills and a strong attention to detail. You're a good fit if you have (or if you can):, • Must have superior CNC and computer programming skills, • Good math skills, especially algebra and trigonometry, • Excellent reading comprehension skills, • Good listening, writing, and verbal communication skills, • Good problem solving skills and be highly detail oriented, • Excellent time management skills / ability to work with little to no supervision, • Wood door component and wood species knowledge, • Competent ability to use measurement tools, • Competent in ability to use Marvin Docs, ECN system, & ICIM, • Competent in ability to read design prints, • MS Office 365 products (Excel, Word, PowerPoint, Outlook) Also want to make sure you have:, • High School diploma, • Associate’s degree in CNC programming, a computer-related field, • Certification from an accredited technical school, • 3 or more years’ experience with Programming / CNC / Auto Cad Programming, • 5 years of door product knowledge a plus, • Demonstrated competence with Office 365, Inventor, and AutoCAD We invite you to See Yourself at Marvin: From people to products, Marvin is committed to creating better ways of living. When you join this family-owned and -led window and door company, you belong to a community full of opportunities. For more than a century, we’ve been at the forefront of designing, building, and engineering premium, award-winning products. Today, Marvin is also proud to have been named a Top Large Employer by Forbes Magazine two years in a row, in 2024 and 2025. With operations in 19 cities across North America, we manufacture Marvin’s quality products, including Infinity Replacement Windows and Doors, and TruStile Doors. Together, we uphold our values and foster a culture where safety and the wellbeing of our people comes first. We take a better living approach with benefits to support you at work and beyond. From day one, you will enjoy health insurance, paid holidays, paid parental leave, a 401(k) retirement savings match and more! Some of our unique and most popular benefits include: • $300 annual wellbeing account to spend on what helps you feel happy + healthy, • Better Living Day! (a paid day off to go have some fun), • Annual profit sharing – recognizing everyone’s contribution to Marvin’s success, • Giving at Marvin – participate in organized volunteer opportunities, • Brighter Days Fund – financial support from your colleagues and the Marvin family during personal hardships Join the more than 8,000 Marvin team members to experience these benefits and more. Apply today! Marvin is an Equal Opportunity Employer: This job posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities of the employee. Accommodation may be made to enable an individual with a disability to perform the essential functions of the position. Any employment offer depends on completing a background check and drug screen to company standards. Compensation: $29.00 - $38.00 per hour

Create an outstanding customer experience and inspire associates to deliver excellent customer service. Establish and maintain a safe, clean environment that encourages our customers to return. Achieve sales and profit goals established for the department, control all established quality assurance standards and expenses and properly schedule and staff technicians to meet the needs of the business. Monitor all functions, duties and activities for the department. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety. RESPONSIBILITIES\n • Fulfill customers' prescription needs while concentrating on the accuracy of every prescription filled \n - Administer vaccines as needed \n - Provide patient counseling and pharmaceutical care to customers \n - Ensure pharmacies comply with all local, state and federal laws (including HIPAA) \n - Maintain a professional image through personal appearance, conduct and attitude and the physical condition of the pharmacy; adhere to pharmacy standards and enforce company dress standards \n - Achieve a thorough knowledge of the trade area, its customers and its competition \n - Create a positive pharmacy department image through strong service, friendliness and cooperativeness with customers, associates and outside vendors \n - Monitor stock replenishment, inventory levels, policies/procedures, record keeping, security, sanitation, scheduling, proper operation of all equipment, pricing, planograms, returns, budgets, reports to management, and product recalls per company policy \n - Maintain proper records, inventory and security on all scheduled drugs (i.e., controlled substances-narcotics) \n - Follow procedures for handling pharmacy products from authorized sources \n - Ensure all accuracy tools, including the accuracy scanner and 24-hour post dispensing audit report, are utilized appropriately \n - Establish/maintain all record keeping practices necessary for legal compliance, company policies, accounting policies and other requested reports \n - Maintain a clean, neat work area, including work counters, shelves, floors and the customer counter to present a professional, sanitary, organized image to customers \n - Ensure all product returns are handled in a timely fashion and per company policy \n - Maintain all equipment (e.g., computers, printers, accuracy scanners and cash registers) to ensure it remains in working condition \n - Maintain and organize all policy manuals, reference books, state laws and required equipment and verify that all staff is knowledgeable of their use \n - Maintain proper signage (e.g., store hours, counseling sign, services signs, pharmacists' photographs and names, and all other signs requested) in all areas necessary \n - Make a strong and continuous effort to broaden personal knowledge and pharmacy skills \n - Must be able to perform the essential job functions of this position with or without reasonable accommodation \n QUALIFICATIONS\n Minimum \n Bachelors Degree in pharmacy \n Current state pharmacist licensure in good standing \n Ability to handle stressful situations \n Knowledge of basic math (counting, addition, and subtraction) \n Effective oral/written communication skills Desired \n 1 year of retail experience \n Second language (speaking, reading, and/or writing) \n

Create an outstanding customer experience and inspire associates to deliver excellent customer service. Establish and maintain a safe, clean environment that encourages our customers to return. Achieve sales and profit goals established for the department, control all established quality assurance standards and expenses and properly schedule and staff technicians to meet the needs of the business. Monitor all functions, duties and activities for the department. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety. RESPONSIBILITIES\n • Fulfill customers' prescription needs while concentrating on the accuracy of every prescription filled \n - Administer vaccines as needed \n - Provide patient counseling and pharmaceutical care to customers \n - Ensure pharmacies comply with all local, state and federal laws (including HIPAA) \n - Maintain a professional image through personal appearance, conduct and attitude and the physical condition of the pharmacy; adhere to pharmacy standards and enforce company dress standards \n - Achieve a thorough knowledge of the trade area, its customers and its competition \n - Create a positive pharmacy department image through strong service, friendliness and cooperativeness with customers, associates and outside vendors \n - Monitor stock replenishment, inventory levels, policies/procedures, record keeping, security, sanitation, scheduling, proper operation of all equipment, pricing, planograms, returns, budgets, reports to management, and product recalls per company policy \n - Maintain proper records, inventory and security on all scheduled drugs (i.e., controlled substances-narcotics) \n - Follow procedures for handling pharmacy products from authorized sources \n - Ensure all accuracy tools, including the accuracy scanner and 24-hour post dispensing audit report, are utilized appropriately \n - Establish/maintain all record keeping practices necessary for legal compliance, company policies, accounting policies and other requested reports \n - Maintain a clean, neat work area, including work counters, shelves, floors and the customer counter to present a professional, sanitary, organized image to customers \n - Ensure all product returns are handled in a timely fashion and per company policy \n - Maintain all equipment (e.g., computers, printers, accuracy scanners and cash registers) to ensure it remains in working condition \n - Maintain and organize all policy manuals, reference books, state laws and required equipment and verify that all staff is knowledgeable of their use \n - Maintain proper signage (e.g., store hours, counseling sign, services signs, pharmacists' photographs and names, and all other signs requested) in all areas necessary \n - Make a strong and continuous effort to broaden personal knowledge and pharmacy skills \n - Must be able to perform the essential job functions of this position with or without reasonable accommodation \n QUALIFICATIONS\n Minimum \n Bachelors Degree in pharmacy \n Current state pharmacist licensure in good standing \n Ability to handle stressful situations \n Knowledge of basic math (counting, addition, and subtraction) \n Effective oral/written communication skills Desired \n 1 year of retail experience \n Second language (speaking, reading, and/or writing) \n

Create an outstanding customer experience and inspire associates to deliver excellent customer service. Establish and maintain a safe, clean environment that encourages our customers to return. Achieve sales and profit goals established for the department, control all established quality assurance standards and expenses and properly schedule and staff technicians to meet the needs of the business. Monitor all functions, duties and activities for the department. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety. RESPONSIBILITIES\n • Fulfill customers' prescription needs while concentrating on the accuracy of every prescription filled \n - Administer vaccines as needed \n - Provide patient counseling and pharmaceutical care to customers \n - Ensure pharmacies comply with all local, state and federal laws (including HIPAA) \n - Maintain a professional image through personal appearance, conduct and attitude and the physical condition of the pharmacy; adhere to pharmacy standards and enforce company dress standards \n - Achieve a thorough knowledge of the trade area, its customers and its competition \n - Create a positive pharmacy department image through strong service, friendliness and cooperativeness with customers, associates and outside vendors \n - Monitor stock replenishment, inventory levels, policies/procedures, record keeping, security, sanitation, scheduling, proper operation of all equipment, pricing, planograms, returns, budgets, reports to management, and product recalls per company policy \n - Maintain proper records, inventory and security on all scheduled drugs (i.e., controlled substances-narcotics) \n - Follow procedures for handling pharmacy products from authorized sources \n - Ensure all accuracy tools, including the accuracy scanner and 24-hour post dispensing audit report, are utilized appropriately \n - Establish/maintain all record keeping practices necessary for legal compliance, company policies, accounting policies and other requested reports \n - Maintain a clean, neat work area, including work counters, shelves, floors and the customer counter to present a professional, sanitary, organized image to customers \n - Ensure all product returns are handled in a timely fashion and per company policy \n - Maintain all equipment (e.g., computers, printers, accuracy scanners and cash registers) to ensure it remains in working condition \n - Maintain and organize all policy manuals, reference books, state laws and required equipment and verify that all staff is knowledgeable of their use \n - Maintain proper signage (e.g., store hours, counseling sign, services signs, pharmacists' photographs and names, and all other signs requested) in all areas necessary \n - Make a strong and continuous effort to broaden personal knowledge and pharmacy skills \n - Must be able to perform the essential job functions of this position with or without reasonable accommodation \n QUALIFICATIONS\n Minimum \n Bachelors Degree in pharmacy \n Current state pharmacist licensure in good standing \n Ability to handle stressful situations \n Knowledge of basic math (counting, addition, and subtraction) \n Effective oral/written communication skills Desired \n 1 year of retail experience \n Second language (speaking, reading, and/or writing) \n

Job DescriptionPediatric Developmental Services (PDS) is seeking to hire a Speech Language Pathologist. Do you enjoy working with children? Would you like to improve the lives of students through exceptional speech therapy? If so, this may be the position for you!This SLP position comes with a competitive salary and generous benefits. Our benefits package includes:Health, Dental, & Vision Insurance with company contributionRetirement Account with company matchingUnlimited CEUsMaterials stipendLicensure & ASHA reimbursementGreat Mentorship Program! QUALIFICATIONS FOR A SPEECH-LANGUAGE PATHOLOGISTMaster's degree in Speech Language Pathology or Communication DisordersASHA certificationState Speech Language Pathology LicenseEvery state requires all Speech Language Pathologists to have a state license. If you do not have a license for a specific state, the licensing team at PDS will help you through the process!A DAY IN THE LIFE OF A SPEECH LANGUAGE PATHOLOGISTAs a Speech-Language Pathologist, you will spend your day helping improve the lives of children. Setting them up for success both in the school setting and beyond is meaningful work that builds a rewarding career!You will provide high-quality services to students based on their IEPs/504 plans. Conducting evaluations, assessments, and writing reports, you determine their strengths and areas of concern in speech, fluency, language, and oral motor skills.ARE YOU READY TO JOIN OUR TEAM?If you feel that would be right for this SLP position, please fill out our initial 3-minute, mobile-friendly application so that we can review your information. We look forward to meeting you!ABOUT PEDIATRIC DEVELOPMENTAL SERVICESPediatric Developmental Services (PDS) provides the nation's public school districts, charter schools, and communities at large with highly qualified pediatric therapists, including speech, occupational, and physical therapists. At PDS, we want to make a difference in the lives of children. From finding and training the best pediatric therapists to partnering them with the right schools and clinics in need, PDS supports win-win initiatives for all. From speech-language therapy to school psychology, our children deserve the best care possible, and at PDS, we make that happen.For every therapist that works for us, we offer real support and a tailored mentorship program. We know that they are essential in our mission to make a difference in the lives of children. This is why we also offer competitive compensation and great benefits.#LI-CR1 Job Posted by ApplicantPro

Create an outstanding customer experience and inspire associates to deliver excellent customer service. Establish and maintain a safe, clean environment that encourages our customers to return. Achieve sales and profit goals established for the department, control all established quality assurance standards and expenses and properly schedule and staff technicians to meet the needs of the business. Monitor all functions, duties and activities for the department. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety. RESPONSIBILITIES\n • Fulfill customers' prescription needs while concentrating on the accuracy of every prescription filled \n - Administer vaccines as needed \n - Provide patient counseling and pharmaceutical care to customers \n - Ensure pharmacies comply with all local, state and federal laws (including HIPAA) \n - Maintain a professional image through personal appearance, conduct and attitude and the physical condition of the pharmacy; adhere to pharmacy standards and enforce company dress standards \n - Achieve a thorough knowledge of the trade area, its customers and its competition \n - Create a positive pharmacy department image through strong service, friendliness and cooperativeness with customers, associates and outside vendors \n - Monitor stock replenishment, inventory levels, policies/procedures, record keeping, security, sanitation, scheduling, proper operation of all equipment, pricing, planograms, returns, budgets, reports to management, and product recalls per company policy \n - Maintain proper records, inventory and security on all scheduled drugs (i.e., controlled substances-narcotics) \n - Follow procedures for handling pharmacy products from authorized sources \n - Ensure all accuracy tools, including the accuracy scanner and 24-hour post dispensing audit report, are utilized appropriately \n - Establish/maintain all record keeping practices necessary for legal compliance, company policies, accounting policies and other requested reports \n - Maintain a clean, neat work area, including work counters, shelves, floors and the customer counter to present a professional, sanitary, organized image to customers \n - Ensure all product returns are handled in a timely fashion and per company policy \n - Maintain all equipment (e.g., computers, printers, accuracy scanners and cash registers) to ensure it remains in working condition \n - Maintain and organize all policy manuals, reference books, state laws and required equipment and verify that all staff is knowledgeable of their use \n - Maintain proper signage (e.g., store hours, counseling sign, services signs, pharmacists' photographs and names, and all other signs requested) in all areas necessary \n - Make a strong and continuous effort to broaden personal knowledge and pharmacy skills \n - Must be able to perform the essential job functions of this position with or without reasonable accommodation \n QUALIFICATIONS\n Minimum \n Bachelors Degree in pharmacy \n Current state pharmacist licensure in good standing \n Ability to handle stressful situations \n Knowledge of basic math (counting, addition, and subtraction) \n Effective oral/written communication skills Desired \n 1 year of retail experience \n Second language (speaking, reading, and/or writing) \n

Job Description The Baerlocher group of companies is one of the world's leading additive suppliers, drawing on experience from more than 190 years of company history. Our products have a worldwide reputation for their high quality standards. The Packaging Operator manages the pack-out station in accordance with latest Baerlocher USA safety and production standards. Primary Responsibilities: • Packaging of material produced on production lines, and assistance during clean-out/change-over, • Ability to assume additional responsibilities of Lead Operator on a temporary basis in the event of Lead Operator absence, • Communicate with Production Foreman and other Production Management, • Maintain a clean and safe work area, • Other duties as assigned Essential Duties and Responsibilities: • Proper and safe operation of all production lines, • Execute production start-ups, shutdowns, and change-overs per Production Management’s request, • Work to meet shift production goals safely and while maintaining quality via direction from Lead Operator and Production Management, • Responsible for in-process quality control. Make adjustments as necessary during shift to produce product within specifications and reject product outside of specifications, • Operate within standard operating procedures (SOPs) and safety/regulatory procedures (Lock-out/Tag-out, Confined Space, Wastewater, etc.), • Conduct in-process quality testing Candidate Qualifications Minimum Requirement: • Basic reading, writing, and arithmetic skills required. This is normally acquired through a high school diploma or equivalent, • Knowledge of and experience with the manufacturing processes, procedures, and machinery. This is normally acquired through two to five years of manufacturing experience, • Manual dexterity required for operating machinery and computers, • Ability to lift up to 100 pounds Strongly desired: Previous chemical plant experience

Job Description General Purpose: The drive thru operator is expected to sell to and service drive-thru guests and collect for each meal prior to serving it. Essential (primary) Functions: The primary responsibility of the drive-thru operator is to sell and service each drive-thru guest within 3 minutes or less by administering the 7 steps to Drive-thru while maintaining guest sensitivity, cleanliness, restocking, sanitation, uniform, safety, security, cash and company policy requirements. Secondary Functions: Any and all other tasks assigned Essential Physical Requirements: Good vision, general and close Good hearing Manual Dexterity Standing, bending, stretching and walking throughout shift Push and pull heavy objects Lift and carry 30 pounds Maintain good personal hygiene/uniform Essential social & Mental Requirements: Able to use computer register Basic reading, writing and math skills Retain verbal requests Good verbal skills Able to work shift work Retain menu item information Able to market the menu Able to handle guest complaints Works well with others Able to count change Maintain composure while under stress We use eVerify to confirm U.S. Employment eligibility.

Job Description Essential Responsibilities and Specific Duties The Blend Team Member is an entry level position in the Powder Blend Division. The purpose of the position is to train and develop in efficiently operating all production areas in the Powder Blend Division. Safety • Learn and comply with the safety procedures, regulations and policies of each blender area., • Participate in all required safety training and programs, • Examples, • Lock-Out-Tag-Out procedure, grounding, handling of hazardous materials, proper lifting techniques, and usage of respirators and other personal protective equipment (PPE)., • Notify leads, supervisors, or manager of safety incidents, and risks. Quality • Understand Blending Quality programs and comply with procedures, and regulations., • Understand the Z2 notification process., • Understand and verify in-process quality checks., • Record any quality deviations, and notify the lead, supervisor, or manager., • Assist in Root Cause analysis for quality deviations., • Understand and comply with the Powder Blend Food Safety program, • Understand the department HACCP plan, • Conduct and document HACCP checks (sieve, magnet, and metal detector) as required, • Maintain accurate and consistent records of product run information., • Assist in Root Cause investigations, • Understand and comply with Allergen program, • Ensure that equipment is clean before and after use and document cleaning parameters, • Ensure that items assigned on Master Sanitation List are effectively completed and documented Equipment/Process Knowledge This position requires the ability to lift 50 lbs. Other requirements are to become proficient at using SAP software and understanding the production transactions and systems. The Blend TM will progress in training through the various blend areas. The Blend TM must have a good work ethic, display good team work, and take initiative to meet customer needs and requirements. The Blend Team Member must demonstrate adequate reading and writing skills, as well as be able to accurately perform basic match calculations. Batching • Ingredient Bill of Materials, and the basics of product families, • Order of addition, • Plating, • Effects of blend time Packaging • Gross/Net, and tare weights, • Understand customer requirements, • Effectively package and seal bags according to correct packaging requirements Cleaning • Understand operation of manual cleaning of each blender (and CIP system where applicable), • Check key cleaning points (areas that are difficult to clean in the dryer), • Allergen, Odor, and Acid washes Equipment The Blend TM will use the following types of equipment: • Forktrucks

Job Description JOB TITLE: ProcessorSUPERVISED BY: Warehouse Superintendent/Warehouse SupervisorPOSITION SUMMARY:Processes material, performs routine maintenance on equipment, and provides general warehouse duties, including pulling steel for customer orders, loading and unloading trucks. DUTIES AND RESPONSIBILITIES: · Safely operate and adjust machinery and equipment for full utilization. · Accurately process material to minimize waste and drops. · Accurately locate and identify stock. · Properly identify and process paperwork necessary for material handling/Production Recording. · Properly tag, band and package material for shipment. · Maintain a clean and safe work area. · Always be helpful and courteous to all customers and employees. · Perform Warehouse functions when needed and when processing work is not available. · Perform other duties as related or assigned for the benefit of the Company. · Good attendance is an essential function of this job.EDUCATION AND EXPERIENCE:High School Diploma or GED.Strong mechanical background.Previous warehouse and related experience preferred.KNOWLEDGE, SKILLS AND ABILITY:Ability to work as a team member without close supervision to meet company and personal goals.Capable of reading a tape measure, micrometers, blueprints and orders.Good eye-to-hand coordination.Good reading, writing and math skills as measured by a pre-employment test.Ability to meet physical demands of position which are 95% of the work day (i.e. lifting up to 50 lbs independently, pushing, pulling, standing, climbing).

Job Description Position: Line Lead - Kemper 1st Shift Pay Range: $22.50-$24.50 per hour Shift & Time/ 1st Shift: 6:00am-4:00pm, Monday-Thursday. Fridays as needed Department: Production Reports to: Shift Supervisor Location: Cincinnati, Ohio 45246 DITSCH USA creates memorable pretzel experiences! We bake artisan pretzels available for both food service and retail markets. As a leading producer of pretzels, we are committed to freshness and providing clean-label products. The quality of our irresistible products comes from more than 100 years of experience and craftsmanship in the ART OF PRETZEL MAKING! We seek those who want to learn and grow within our organization. Ditsch USA offers development options to add to your skill set and open new opportunities for you within our organization. At Ditsch USA you will find a welcoming, safe, and team-orientated environment. As a Line Lead, you'll be responsible for increasing the ratio of value to non-value and eliminating waste of the overall supply chain from start to finish. They ensure the production floor produces a quality product in a safe and cost-effective manner, that meets the production schedule and cost specifications. The Line lead will create an environment where the employees feel valued, challenged and empowered by evaluating the performance and potential of each employee and provide appropriate coaching. Responsibilities: • Foster & maintain a clean and safe work environment, ensuring compliance to safety, health & environmental programs. Participate in GEMBA walks to engage the workforce in behavior-based safety., • Leverage Job Safety Analysis (JSA) & Risk Assessment to mitigate and prevent injuries or incidents – regularly review and update safety procedures based on findings. Collaborate with team members to promote a proactive safety culture and enhance overall workplace safety., • Effectively conduct root cause analyses and implement countermeasures for all incidents to prevent recurrence. Complete thorough and timely investigation reports, ensuring accurate documentation and adherence to company protocols and regulatory requirements. Collaborate with relevant teams to address findings and drive continuous improvement in safety & operational processes, • Adhere to all Good Manufacturing Practices (GMPs) and food handling requirements, ensuring compliance at all times. Monitor and enforce these standards among employees, providing training and guidance as needed., • Ensure job positions are adequately staffed at shift change and oversees operation of the production lines to ensure efficient production, as well as, sanitation, PM work and changeover against the schedule., • Review the production schedule to anticipate and plan for efficient changeovers, ensuring minimal downtime and seamless transitions between production runs. Coordinate resources, materials and team members to align with schedule requirements, and verify that equipment and tools are properly prepared for the next task. Monitor progress to adjust plans as necessary and maintain overall production efficiency, • Accurately completes all production paperwork in conjunction with the other shift lead and works closely with the production schedule to attain daily targets, • Keeps the Supervisor abreast of any employee issues or concerns and makes recommendations for disciplinary actions. Will provide employee feedback related to performance and disciplinary action in the company of the Supervisor., • Manage conflict between team members. Recognizes and resolves non-technical issues that are occurring within the team involving HR when necessary., • Demonstrate knowledge of HR practices. Delivers feedback in a professional and positive manner. Able to adapt your leadership style to work situations. Provides insight pertaining to employee evaluations., • Assist supervisors in revising standard operating procedures, including suggesting changes, writing procedures, revising manuals and communicating updates with employees., • Evaluate performance standards (i.e. required line output & efficiency, changeover times, waste, staffing), ensure they are clearly communicated and accessible, and hold individuals accountable for adhering to these standards and fulfilling their commitments. Follow the appropriate escalation process when necessary to address any issues or concerns, • Assesses or determines the training need for employee(s). Leads effort to plan and complete the training., • Possess a general knowledge of all machine operations, including understanding proper machine settings and ensuring the correct lot numbers are accurately labeled on all products. Maintain familiarity with machine controls, adjustments, and settings to optimize performance and quality output. Regularly verify machine settings, product quality, lot codes, etc. to prevent errors and maintain consistency in production., • Competency is required to operate the label machines efficiently and accurately, using product knowledge to ensure proper labeling throughout the production process. Understanding of specification sheets is required during a production run to verify all aspects are being met, ensuring product consistency and quality. Maintain familiarity with product specifications to address any potential issues proactively., • Ensure cleaning and sanitation duties are being completed as required, maintaining cleanliness and hygiene standards. Follow all cleaning protocols and safety guidelines to uphold quality standards and prevent cross-contamination., • Provide operational support when required to relieve operators. Manage Shift changes, ensuring that the outgoing shift departs on time and coordinating breaks for all team members. Facilitate smooth transitions between shifts to minimize disruptions and maintain efficient production operations., • Communicate any line breaks or gaps in the production process to the supervisor promptly. Provide detailed updates on the impact of these disruptions, along with recommendations for resolution, to ensure minimal impact on production efficiency and maintain a smooth workflow., • Perform other duties assigned by the supervisor. Required Skills/Abilities: • Ability to read, analyze, and interpret common industry, production, and technical documents in English., • Strong mechanical aptitude and problem-solving skills., • Ability to work independently with meticulous attention to detail., • Proficient understanding of production procedures and equipment., • Commitment to maintaining high safety standards., • Strong leadership and communication skills within a team environment., • Proven experience in a fast-paced environment with a focus on quality and safety., • Ability to comprehend and communicate effectively in English., • Basic math skills and ability to work weekends and holidays as needed., • Prior proficiency in equipment uses and operation., • Ability to define problems, collect data, establish facts, and draw valid conclusions. Education and Experience: • High School diploma or equivalent., • Two years’ experience in a manufacturing environment, preferably a food environment., • Prior leadership experience preferred., • Prior experience with Lean manufacturing principles and continuous improvement tools and methodology is a plus., • Knowledge of health and safety regulations., • 80/20 floor to office ratio., • Familiarity with PLC-controlled equipment, preferred. Physical Requirements: • Working conditions are normal for a manufacturing environment., • May be required to work overtime as needed., • Ability to work multiple places on the production line., • Ability to “break out” other team members., • Ability of adjusting or moving objects of varying weights up to 50 lbs. in all directions., • Ability to communicate with others to exchange information., • Repeating motions that may include the wrists, hands, and/or fingers., • Hear sounds and recognize the difference between them., • Ability to withstand various climates through the facility i.e. freezer, dock, production (as low as -15 degrees up to 110 degrees), • Ability to work in an environment with flashing lights, horns, and powered moving equipment operating in proximity., • Moving about to accomplish tasks or moving from one worksite to another., • Prolonged periods of sitting, standing, walking and/or remaining in a stationary position and often standing or sitting for prolonged periods., • Ability to move self into different positions to accomplish tasks in various environments including tight and/or confined spaces., • Must be physically able to ascend and descend ladders, stairs, ramps, poles and scaffolding., • Excellent hand/eye coordination., • Ability to bend, stretch, twist, or reach out., • Adjust body movements or equipment controls to keep pace with speed changes of moving objects., • See details of objects that are less than a few feet away., • See differences between colors, shades, and brightness., • Adaptability to work in diverse environments and surfaces., • Ensure compliance with GMPs and maintain a clean work environment., • Wear Personal Protective Equipment as needed., • Stand and move around the manufacturing floor for up to 10 hours., • Capability to stand, walk, squat, and perform repetitive tasks. If you're seeking a role where your continuous improvement mindset, mechanical aptitude and leadership skills shine, apply today and become an integral part of our innovative team. What we offer you (perks, bonuses, benefits): • Medical, Dental, and Vision insurance, • Automatic, FREE $25,000 life insurance policy, • Flexible Spending Account (FSA) and Health Savings Account (HSA) options, • Additional voluntary life, AD&D, Critical Illness, and Short-Term Disability, • 401k Retirement Plan with Match, • Paid Time Off (PTO) & Holidays, • Ongoing training and development Please note this job posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee in this role. Duties, responsibilities, and activities may change at any time with or without notice. The physical requirements are representative of those an employee may encounter while performing the job's essential functions. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. For more information, visit www.ditsch.com/en Recruiters We are not accepting resumes/referrals from outside recruiters unless we have signed a contract. We value our relationships with our recruiting partners and all potential candidates. As a recruiter, if you share a resume/referral and we do not have a signed agreement, we still may contact the candidate and reserve the right to not engage your recruiting partnership. Ditsch USA, is an equal-opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Job Description The Baerlocher group of companies is one of the world's leading additive suppliers, drawing on experience from more than 190 years of company history. Our products have a worldwide reputation for their high quality standards. The Packaging Operator manages the pack-out station in accordance with latest Baerlocher USA safety and production standards. Primary Responsibilities: • Packaging of material produced on production lines, and assistance during clean-out/change-over, • Ability to assume additional responsibilities of Lead Operator on a temporary basis in the event of Lead Operator absence, • Communicate with Production Foreman and other Production Management, • Maintain a clean and safe work area, • Other duties as assigned Essential Duties and Responsibilities: • Proper and safe operation of all production lines, • Execute production start-ups, shutdowns, and change-overs per Production Management’s request, • Work to meet shift production goals safely and while maintaining quality via direction from Lead Operator and Production Management, • Responsible for in-process quality control. Make adjustments as necessary during shift to produce product within specifications and reject product outside of specifications, • Operate within standard operating procedures (SOPs) and safety/regulatory procedures (Lock-out/Tag-out, Confined Space, Wastewater, etc.), • Conduct in-process quality testing Candidate Qualifications Minimum Requirement: • Basic reading, writing, and arithmetic skills required. This is normally acquired through a high school diploma or equivalent, • Knowledge of and experience with the manufacturing processes, procedures, and machinery. This is normally acquired through two to five years of manufacturing experience, • Manual dexterity required for operating machinery and computers, • Ability to lift up to 100 pounds Strongly desired: Previous chemical plant experience

Job Description Are you a dedicated and motivated personal trainer looking to make a significant impact on individuals' lives? We are actively seeking exceptional trainers to join our team and deliver personalized fitness experiences in the comfort of our clients' homes. Join us and be a part of a dynamic community that values your expertise, provides flexibility, and supports your professional growth. Join Our Team of Elite In-Home Personal Trainers - Empower Lives through Fitness! BENEFITS/PERKS • Work-life balance: Design your own schedule and choose the clients you prefer to work with., • Freedom to succeed: No non-compete agreements, giving you the flexibility to work where and when you want., • Competitive rates: Earn $25 to $45 per hour, rewarding your skills and dedication., • Bonuses and rewards: Enjoy retention bonuses, client referral bonuses, and trainer referral bonuses., • Liability insurance: Your safety and peace of mind are our priority, with comprehensive coverage through the Svetness General Liability policy., • Customer support team: Focus 100% on your clients' goals while our dedicated concierge handles client requests and scheduling changes., • Education and growth: Access free ongoing education resources, including live education webinars, and receive ongoing manager support to elevate your expertise., • Fitness equipment discounts: Enjoy a 30% discount on fitness equipment to enhance your training programs., • Partner programs: Access to discounts to your favorite lifestyle brands (Meal Prep, Supplements, etc), • Warm client base: We bring clients directly to you, eliminating the need for selling or marketing efforts., • Svetness App: Utilize our free app to easily track client progress, manage communications, and enter measurements seamlessly. RESPONSIBILITIES The Certified Personal Trainer will be responsible for providing one-on-one and couples personalized fitness instruction in person to clients at their home, apartment gym or outside while encouraging them to reach their fitness goals. Responsibilities are as follows: • Customize client workout programs developed from the Initial Assessment, • Utilize the Svetness Fitness App for all client sessions, including programming & session notes, • Demonstrate each exercise and ensure client is performing correctly with or without modifications, • Conduct client Reassessments every 4-6 weeks, • Maintain client session appointments through Svetness scheduling software, • Able to provide a flexible schedule to accommodate client appointments, • Able to commute to and from client sessions up to 45 minutes QUALIFICATIONS • Certified Personal Trainer: Accredited by NCCA, DEAC, or NBFE., • CPR/AED Certification: Ensure clients' safety with up-to-date CPR/AED training., • Education and experience: High school diploma or GED equivalent and 1-3 years of personal training experience., • Strong communication skills: Effectively communicate verbally, in writing, and technically., • Knowledgeable in nutrition: Possess a basic understanding of nutrition and healthy living practices., • Fitness expertise: Familiarity with a variety of exercise equipment and personal training methods., • Physical ability: Capable of lifting, pushing, pulling up to 50 lbs. and performing athletic calisthenics duties., • Requirements for this position include the possession of personal basic training equipment to effectively assist clients in achieving their goals. It is important to note that clients may not always have access to the necessary equipment., • Reliable form of transportation We take pride in our commitment to building an environment that embraces individuals from different genders, backgrounds, and ethnicities. Our organization values diversity and encourages candidates of all gender identities, backgrounds, and ethnicities to apply. We believe in creating an inclusive space where every individual feels welcome, respected, and valued. Join us in our mission to foster a workplace that celebrates the unique perspectives and experiences of our diverse team.

Description Messer Construction Co. is a construction manager and general contractor that provides leadership for complex commercial building projects. As an employee-owned company, Messer’s purpose is to build better lives for its customers, communities, and employees. Founded in 1932, Messer’s footprint has grown to 12 regional offices located across the Midwest and Southeast: Charlotte and Raleigh, North Carolina; Greenville, South Carolina; Columbus, Cincinnati, and Dayton, Ohio; Louisville, Lexington, and Newport, Kentucky; Indianapolis, Indiana; and Knoxville and Nashville, Tennessee. Messer is a $1.5 billion organization, consistently ranked among the country’s 100 largest contractors by Engineering News-Record. Messer is one of the nation’s leading health care and higher education builders, and boasts extensive, award-winning work in multiple market segments. Messer employees live where they work, resulting in the company’s sustained commitment to building better communities. We are currently seeking a Pursuit Marketing Specialist to join our Marketing and Corporate Communication (M&CC) team. An ideal candidate must be a self-starter, quick learner, personable, persuasive, deadline-and detail-oriented. They should also possess strong writing and visual communications skills. Candidate must be able to work both in teams and alone in a fast-paced environment while supporting the proposal and sales presentation process. What You Will Do: • Review and coordinate proposals and presentations while also creating and maintaining other sales documents/media, including project description sheets and employee bios., • Plan, write, design and produce high-impact, creative sales materials including but not limited to qualifications, proposals, and presentations., • Translate complex strategies and themes into easy-to-understand communications., • Make technical content more engaging and understandable for a lay audience, while communicating the value and benefits Messer delivers., • Provide strategic counsel to support Business Development representatives throughout Messer's eleven regions while interacting closely with other Project Development departments., • Interact with Messer employee-owners (in the field and office) and external partners and vendors., • Embrace and follow department standards and processes including brand standards, writing style guide, quality control, close-out and Lean Daily Management. What You Will Bring: • Bachelor's degree in Journalism, Electronic Media, Marketing, Communications or related field., • 1 to 3 years of experience working in a Marketing/Sales/Communications role., • Must have excellent written and oral communication skills and the ability to interact effectively with all levels of employees., • Knowledge of Adobe InDesign and other Creative Suite applications a plus (Mac environment)., • Video production knowledge a plus, • Proficiency with technology, including Smartsheet, Outlook, Word, Excel and Powerpoint, • Knowledge of construction industry a plus, • Some overnight travel required. Messer Construction Co. does not provide immigration-related sponsorship for this role. Candidates who need employer immigration sponsorship now or in the future will not be considered for this position. Your decisions influence your career at every step: Make yours count with Messer Construction Co. In business since 1932 and employee-owned since 1990, Messer builds projects and careers that leave a lasting impact on our communities. We bring opportunities for collaboration and growth; you bring the determination. Let’s build something great together. All Messer employees are required to comply with our Substance Abuse Prevention Policy as a condition of employment. Messer may condition offers of employment upon taking and passing of a post-offer/pre-employment drug screen. #Appcast

Job DescriptionACT Verbal and Math Tutors needed - immediate hiring. Huntington Learning Center is hiring part-time ACT Science and Math Tutors for Chemistry, Physics, Engineering, and ACT Math/Science prep. Immediate Openings at Hyde Park and Harper's Point, Cincinnati. Huntington Learning Center is looking for part-time English, Writing, and Reading teacher to guide students enrolled in our highly acclaimed ACT and SAT exam prep programs. This is an excellent opportunity for candidates from ANY industry; however, a related four-year college degree is required. Job Details: • Verbal tutors include High School teachers/instructors and college students with a bachelor's degree who are working in a Master's or Doctorate program., • This is also a great opportunity for those who have been away from the teaching field for a while and want to get involved with students again., • We provide paid training., • You teach your students in a one-to-one environment using our curriculum. Instruction is provided at our facility., • Flexible schedules are available Monday through Friday, and Saturday. To apply, respond via Indeed and include your resume.To learn more, visit our website at www.HuntingtonHelps.com. 2012 Huntington Mark, LLC. Independently Owned and Operated. SAT and PSAT are registered trademarks of the College Entrance Examination Board. ACT is a registered trademark of ACT, Inc. The College Entrance Examination Board and ACT, Inc. were not involved with and do not endorse this program.

Job Description Senior Solutions Analyst– Microsoft Dynamics 365 Business Central Role We are looking for a Senior Solutions Analyst to lead and support Microsoft Dynamics 365 Business Central (BC) initiatives across our warehousing, manufacturing, and supply chain operations. This role sits at the intersection of business process, functional design, project delivery, and technical execution — you'll lead cross-functional BC projects end-to-end while staying hands-on enough to dig into data, troubleshoot configurations, and speak credibly with developers and functional consultants alike. This is a strong fit for someone who has run BC implementations or major enhancement projects in a manufacturing or distribution environment, understands how warehouse and production processes translate into ERP configuration, and is comfortable enough with SQL and basic scripting to validate data, investigate issues, and bridge conversations between business stakeholders and technical teams. This is an individual-contributor role — it does not carry people-management responsibilities — based on-site (not a remote position). Responsibilities • Own the full project lifecycle for Business Central initiatives — scoping, planning, resourcing, risk management, testing coordination, go-live, and post-implementation support, • Lead projects touching warehouse management (bin/license plate structures, inventory tracking, lot/expirationcontrol) and manufacturing processes (MES, process control, shop floor tools), • Translate business requirements from warehouse, production, and supply chain stakeholders into clear functional specifications for BC configuration or development, • Coordinate with internal developers, ISV partners (e.g., warehouse/license plate extension vendors), and Microsoft partner resources on custom development, AL extensions, and third-party integrations, • Perform hands-on data analysis and validation using SQL to support testing, migration, and troubleshooting — able to query and interpret BC data structures, • Leadintegration-related projects (e.g., EDI, SAP-connected customer systems, document capture, payroll/HR system feeds) from a PM and functional-analysis perspective, • Drive UAT planning and execution, ensuring test coverage reflects real warehouse and production workflows, • Identifyprocess gaps and recommend BC configuration or light customization solutions, escalating to development resources when needed, • Maintain project documentation, timelines, and status reporting for both technical teams and business leadership, • Support change management and end-user training for new BC functionality, • Serve as a point of escalation for end users on BC-related process and system questions, providing day-to-day troubleshooting support andidentifyingrecurring issues that point to broader process or configuration improvements, • Participate in evaluating BC apps, ISV extensions, and third-party tools forfitwithin a manufacturing/warehouse environment Skills Required: • 5+ years of experience focused on Microsoft Dynamics 365 Business Central (or NAV) implementations or major enhancements, • Demonstrated experience with BC in a warehousing/distribution and/or manufacturing environment (inventory management, bin/location structures, production orders, costing), • Strong analytical skills — comfortable digging into data and processes to diagnose root causes rather than just tracking tickets, • Working knowledge of SQL: able to write and interpret queries against BC/SQL Server or Azure SQL databases tovalidatedata and support troubleshooting, • Basic familiarity with software development concepts (able to read/follow AL code changes, understand extension architecture, or write simplescripts) —deep development expertise is notrequired, but technical fluency is, • Experience managing vendor/ISV relationships and coordinating technical resources (internal or contracted developers, Microsoft partners), • Strong written and verbal communication skills, with the ability to translate between technical and non-technical audiences Preferred: • Experience with formal project management practices (scoping, risk logs, status reporting, UAT planning), • Experience with Business Central warehouse/license plate ISV extensions (e.g., Insight Works), • Familiarity with Power Automate, Power BI, or other Microsoft Power Platform tools, • Experience supporting BC in a 24×7 production environment, • Exposure to customer-owned inventory models or compliance-driven inventory tracking (e.g., managing inventory on behalf of a customer with its own ERP/SAP requirements), • Experience with EDI, document capture/OCR tools, or third-party payroll/HR integrations, • Use AI-assisted development tools (e.g., GitHub Copilot, Microsoft Copilot) to support light coding tasks such as SQL query writing, AL extension review, and small automation scripts, • Apply sound judgment in AI-assisted development — validating AI-generated code/queries before use and escalating complex development work to dedicated developers Success Criteria • BC projects delivered on time, with requirements that accurately reflect real warehouse and shop-floor operations, • Fewer post-go-live surprises because data and process validation happened early and thoroughly, • Business stakeholders trust that project updates are clear, honest, and grounded in technical reality, • Developers and ISV partners see you as someone who understands the “why” behind requirements, not just a ticket router

Job Description Position Summary: The Development and Fundraising Coordinator plays a key role in advancing the mission and growth of the organization by supporting business development initiatives and fostering community and partner relationships. This position is responsible for marketing and communications, client engagement, partnership development, grant writing, fundraising efforts, and managing client-focused resources. The ideal candidate will be proactive, highly organized, and capable of managing multiple priorities while representing the organization professionally to internal and external stakeholders. Key Responsibilities: 1. Marketing & Communications • Develop and implement outreach strategies to increase brand awareness., • Create content for newsletters, press releases, promotional materials, and social media platforms., • Maintain and update the organization’s website and marketing materials., • Collaborate with internal teams to align messaging and branding. 1. Client Engagement & Partnerships • Cultivate and maintain strong relationships with clients, partners, and stakeholders., • Support the development and execution of partnership strategies., • Assist in organizing community events, informational sessions, and engagement activities., • Serve as a liaison between the organization and potential partners or clients. 1. Grant Writing & Fundraising • Research funding opportunities from government, private, and philanthropic sources., • Draft compelling grant proposals, letters of intent, and funding requests., • Track submission deadlines and reporting requirements., • Coordinate and execute fundraising campaigns, donor appreciation initiatives, and special events., • Develop relationships with corporate sponsors, faith-based organizations, and philanthropic networks to expand funding sources., • Monitor fundraising progress and report outcomes to leadership. 1. Client Resource Development & Management • Maintain a database of community resources and referral partners., • Create and distribute client resource guides and tools., • Collect and analyze data to improve client services and partnerships., • Assist with onboarding and training partners or clients on available resources. Qualifications: • Bachelor's degree in Business, Marketing, Communications, Public Administration, or related field preferred., • 2+ years of experience in business development, communications, nonprofit, or client-facing roles., • Demonstrated experience with grant writing and/or partnership development is a plus., • Excellent written and verbal communication skills., • Strong interpersonal and networking abilities., • Highly organized with attention to detail and follow-through., • Proficient in Microsoft Office Suite, Google Workspace, and marketing platforms (e.g., Mailchimp, Canva)., • Passion for community engagement, mental health, and social impact work., • Behavioral Health experience preferred Core Competencies: • Strategic Thinking, • Communication & Presentation, • Relationship Building, • Project Management, • Adaptability, • Initiative & Problem Solving

Job DescriptionDescription: Command Investigations LLC is seeking an Insurance Claims Investigator with a minimum of one year of experience to become part of a dynamic team. This is a great opportunity for individuals with prior claims investigation experience who demonstrate integrity, independence, and a drive to succeed in a fast-paced investigative environment. Why You Will Love Working with Command Investigations, LLC? At Command Investigations, we are invested in YOU! We know, together, we can Lead with Excellence to provide top-tier Service with Integrity that drives Results! Our employees have opportunities to grow within a nationally recognized organization in an exciting and evolving industry. Pay: $23-$30 per hour (varies based on state) Schedule: Business hours are typically Mon-Fri; exact times are dependent on casework objectives. Location: Casework will be anywhere within 2 hours of the job listing location. What You Will Do: In this role, you will conduct claims investigations by gathering evidence, interviewing the parties involved, documenting findings, and preparing comprehensive, detailed reports for client review. Conduct investigations related to insurance claims, including workers’ compensation, general liability, auto, and property cases. • Conduct complex field investigations involving multiple claim types., • Submit daily updates summarizing your progress and observations., • Manage your time effectively to meet client billable-hour expectations., • Write detailed, professional statements and investigative summaries., • Deliver clear, client-ready reports that meet Command's quality standards., • Perform scene investigations, recorded statements, scene canvassing, document retrieval, and courthouse research., • Operate safely and remain alert while driving during field assignments. Your curiosity and persistence will turn each case into a story built on truth and evidence. Requirements: Special Note: This role requires you to supply your own equipment, including but not limited to, a camera and a digital recorder. Certain equipment specifications or minimum standards may apply. What We Are Looking For: • Exceptional attention to detail and accuracy., • Strong work ethic with a willingness to learn and adapt., • Team-oriented mindset and open-minded attitude., • Ability to thrive in a focused, detail-driven, and repetitive environment., • Strong computer skills and working knowledge of Microsoft Suite, specifically in Word and Outlook., • Excellent written and verbal communication skills. What You Will Bring: We’re looking for investigators who are driven, professional, and dedicated to uncovering facts with accuracy and integrity. • Demonstrate at least 1 year of field investigations experience, including face-to-face recorded statements and report writing. Prior experience with multi-line investigations preferred., • Travel across multiple states as needed to complete case assignments. Residing within a 30-mile radius of the posted location is preferred., • Hold a valid (state) Investigator license (or eligibility for licensure in surrounding states). Or have the ability to obtain this license upon being hired., • Ability to effectively use computers and digital tools, including navigating websites, entering and retrieving information from web-based systems, and troubleshooting basic technical issues required., • Excellent reading skills and the ability to follow detailed directions are required., • Independently, organize casework and schedule while also providing excellent customer service and demonstrating strong interpersonal, organizational, and multi-tasking skills., • Flexibility and effective time management are required, • Adapt to variable schedules — including nights and weekends when required. Being flexible to work overtime and a willingness to work the required schedule are preferred., • Maintain a reliable, fuel-efficient vehicle and required insurance coverage., • Complete a Command Investigations, LLC employment application and submit to pre-employment tasks as required for employment. What You’ll Need: To qualify for this position, applicants must possess the following: • A minimum of 1-3 years of Claims, SIU, or adjusting experience. Other related experience should be indicated on the application., • An Associate’s or Bachelor’s degree in Criminal Justice or a related field., • Excel in report writing and typing (50+ WPM) with accuracy and attention to detail., • Understand investigative processes, insurance law, and claim procedures., • English speaking required. Multi-lingual is a plus., • A reliable personally owned vehicle., • Proper photographic recording, video recording, and audio recording equipment. Measuring tools and safety equipment is also preferred., • Thrive under pressure and maintain professionalism in sensitive situations., • Demonstrate self-motivation, accountability, and sound judgment. Physical Requirements: • The physical and mental demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • The employee will be required to remember and understand certain instructions, guidelines, or other information., • The employee should have the ability to lift up to and including 25lbs/11.34kg on occasion., • The employee will be required to sit, stand, and/or walk for long periods at a time., • The employee will be required to enter text or data into a computer or other machine by means of a traditional keyboard. Traditional Keyboard refers to a panel of keys used as the primary input device on a computer, typographic machine, or 10-Key numeric keypad., • Specific vision abilities required for this position include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. The associate must be able to hear, understand, and distinguish speech and surrounding sounds, such as traffic, environmental noises, or standard office activity. About Command Investigations Command Investigations, founded in 2012, is a nationally recognized investigations firm offering surveillance, remote investigations, desktop intelligence, and specialty services to the insurance defense industry. Grounded in core values of integrity, service, and results, we deliver fast, reliable outcomes and treat every client like they are our only client. Our team leverages cutting-edge technology to stay at the forefront of the industry. With headquarters in Lake Mary, Florida, our experts provide services across the U.S. on a national scale. Command Investigations LLC is an Equal Opportunity Employer.

Job Description Job Title: Ophthalmic Technician - Willing to Train! Company: Bennett & Bloom Eye Centers Location: Florence, KY 41042 Travel: Travel to our office in Crestwood, KY will be required as needed; we do pay mileage reimbursement! Perks: • Full Benefits Package - Medical, Vision, Dental and Life Insurance, • 401k + Employer Matching, • Paid Time Off (PTO) and Paid Holidays, • Paid Maternity Leave, • Eyecare Education Reimbursement, • Competitive Base Pay, • Employee Discounts Hours: • Full Time, • Our offices are open from Monday-Friday 7am-7pm., • Your shifts will fall within those hours, and you may need to work a little earlier/later as needed. Requirements: • High School Diploma or GED Equivalent, • Experience working as an Ophthalmic and/or Optometric Technician is preferred, • Scribing experience is preferred, • Favorable result on Background Check, • Basic computer skills, • Strong customer service skills, • Excitement to learn and grow Essential Functions: • Facilitate patient flow, • Assist the doctor in preliminary testing, • Verify medical and vision insurances, • Effectively communicate with patients, doctors, and managers, • Answer inquiries through phone, email, and in-person requests SUMMARY An Ophthalmic Technician is a valuable asset to an Ophthalmologist as they assist in providing excellent patient care to the patients during their visit. This employee will use ophthalmic techniques to perform preliminary work-up of patients in a clinic setting, scribe for Physicians and may also directly assist Physician(s) with examinations and treatment of patients. ESSENTIAL DUTIES AND RESPONSIBILITIES • Provide exceptional customer service during every patient encounter (in person or via phone)., • Display a professional attitude, greet patients promptly with a smile, and thank them when they leave, • Anticipate Physician needs to facilitate the flow of the clinic, • Practice urgency at all times with patient's time, as well as the Doctor's time and schedule, • Comply with all company policies and procedures, including HIPAA, • Verify patient's information by interviewing patient, • Record patient's medical history and current medications and confirm purpose of visit, • Record all data in the patient's Electronic Medical Record (EMR), • Check condition of patient's eyes by observing pupils, muscles, visual acuity and extraocular movements, • Required skills include: dilation, refraction, pressures, and performing a variety of diagnostic tests including visual fields, OCT, GDX, IOL master, auto refractor and topography, • Demonstrates working knowledge of eye anatomy, diseases, symptoms and ocular medications, • Accurately and thoroughly document medical visits and procedures as they are being performed by the Physician, • Demonstrates basic understanding of examination and procedure codes (ICD-9 codes) when inputting into the EMR system, • Ensure that accurate procedure coding/charges for all procedures/drugs for all patients and correct diagnosis codes are used, • Prepare patients for treatments and minor procedures; measure and record vital signs (blood pressure, pulse and respiration rate) as required, • Open and close exam rooms as needed, • Keep examination, treatment, laser and any other assigned rooms cleaned and stocked with supplies, and keep drug count up to date, • General office duties and cleaning to be assigned by manager QUALIFICATIONS • Desire to gain industry knowledge and training, • Demonstrates initiative in accomplishing practice goals, • Ability to grow, adapt, and accept change, • Consistently creates a positive work environment by being team-oriented and patient-focused, • Ability to interact with all levels of employees in a courteous, professional manner at all times, • Commitment to work over 40 hours to meet the needs of the business, • Ability to work weekends when applicable, • Reliable transportation that would allow employee to go to multiple work locations with minimal notice EDUCATION AND/OR EXPERIENCE • High school diploma or general education degree (GED) required, • One year of related experience and/or training; or equivalent combination of education and experience, • Experience working as an Ophthalmic and/or Optometric Technician is preferred, • Scribing experience is preferred LICENSES AND CREDENTIALS • Current Certified Ophthalmic Assistant (COA) or Certified Ophthalmic Technician (COT) certification is preferred, but not required, • Ophthalmic Scribe Certification (OSC) certification is preferred, but not required SYSTEMS AND TECHNOLOGY • Requires proficient keyboarding skills, use of Electronic Medical Record (EMR) and image management system, • Proficient in Microsoft Excel, Word, PowerPoint, Outlook, • Computer proficiency and ability to quickly learn new applications PHYSICAL REQUIREMENTS • This role requires a variety of physical activities to effectively perform essential job functions. The position involves frequent walking (75%), sitting (50%), and standing (50%), with regular bending, stooping, and reaching (25–50%). Employees must be able to lift, carry, push, and pull items up to 25 lbs. Strong fine motor skills and full use of hands are essential, as the role demands constant grasping, writing/typing, and use of technology. Visual and auditory acuity - including color, depth, peripheral vision, and the ability to adjust focus - is required 100% of the time. Occasional driving or climbing may also be necessary. If you need assistance with this application, please contact (636) 227-2600. Please do not contact the office directly – only resumes submitted through this website will be considered. EyeCare Partners is an equal opportunity/affirmative action employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: We are looking for a Senior SCADA/ I&C Professional Engineer to join our Water Team to improve infrastructure across the firm. The candidate must be a licensed PE with a bachelor's degree in civil, electrical, or adjacent engineering degrees and fifteen years or more of related experience. The candidate should have experience working with various projects that may include water/wastewater treatment plants, pump stations, sewer/ combined sewer overflow, collection and conveyance systems, distribution and transmission systems, storm water, hydrologic and hydraulic models and/or other water resource projects. The candidate must also be self-motivated, work well with others, and have excellent writing, organizational, and communication skills. A flexible hybrid-remote work schedule is available after 30 days of employment.Typical responsibilities include: • Lead Wade Trim's SCADA and I&C work in across the discipline., • Support the design, development, installation, and startup of SCADA & PLC-based automation and control systems for water and wastewater treatment plants, pump stations, and facilities., • Extensive experience designing and supporting SCADA systems for water and wastewater treatment facilities., • Proven ability to manage multiple concurrent projects with municipal water/wastewater clients., • Strong coordination skills with multidisciplinary teams, contractors, and utility stakeholders., • Experience supporting construction administration, including RFIs, submittals, field changes, and startup., • Excellent written and verbal communication skills, including the ability to explain complex technical concepts to non-technical users., • Ensure designs comply with applicable codes, standards, and best practices, including ISA-101 and utility-specific HMI/SCADA standards., • Develop and maintain SCADA, PLC, and HMI standards for water and wastewater clients to ensure consistency, usability, and long-term maintainability., • Perform quality control and peer reviews for I&C and electrical design deliverables across multiple projects., • Support development of new SCADA products, templates, and internal tools to improve efficiency and reliability., • Provide technical leadership and mentorship to junior engineers and technicians., • Provide design reviews for I&C and electrical portions of district or firmwide projects., • Support construction services including submittal reviews, RFIs, field inspections, testing, startup support, and change order management., • Leads electrical and instrumentation and control (I&C) design specifications and drawings including one-line diagrams, electrical detail drawings, process and instrumentation drawings (P&IDs), • Develop and assist with electrical designs that include calculations and power distribution for mechanical equipment related to municipal water and wastewater projects, • Experience includes general electrical power distribution and supply design, lighting and receptacle plans, mechanical equipment power plans, panel board schedules, arc flash studies, and back-up power generation design for water and wastewater treatment plants, CSO facilities and pump stations., • Travel to and attend client, staff and project meetings, • Prepare permit applications, • Assist with the preparation of cost estimates, • Review and comment on Contractor submittals, • Assist Project Managers, • Manage business development/sales activities and maintain excellent client relations, • Prepare a summary of qualifications, presentations, and proposals, • Manage financial and technical aspects of multiple projects, • Prepare proposals and presentations, • Conduct on-site inspections as needed, • Prepare project status and other reports, • Attend client, public, project, and staff meetings including client progress, plan review, pre-construction, etc., • Maintain a safe working environmentEducation:, • Bachelor’s Degree in Electrical, Civil, Mechanical Engineering or related degree Skills/Experience:, • Professional Engineering License required, • NCEES eligible preferred, • 15+ years of related Engineering experience About Wade Trim: Wade Trim is committed to maximizing the value of infrastructure investments. We’ve been solving complex engineering challenges for a century. We customize our work approach to fit each project using a collaborative, friendly style to deliver solutions our clients can stand behind. Our supportive culture recognizes and strives to fulfill collective client, company, and individual needs. Mentoring and building skills of Wade Trim staff is a priority. Frequent interaction among staff is encouraged, company leadership is easily accessible, and opportunities are provided for staff to help shape the firm’s future through strategic planning. Work/life balance is supported through a flexible, hybrid work schedule that brings team members together in the office at least three days a week and connects them virtually when working from home. To solve our clients’ toughest challenges, we’ve devoted ourselves to delivering innovative solutions. Our Office of Applied Technology (OAT) is dedicated to seeking new technologies or ways to apply existing technologies to enhance value to our clients and positively impact communities. All staff are encouraged to share ideas and suggestions for innovative technologies or processes to adopt. This open-minded approach enables us to advance technology, foster innovation, and stay ahead of our clients’ needs. Wade Trim’s success is shared by the employees that make it happen. Since our beginning, our firm has been 100% employee owned. This cultivates an ownership mindset that benefits our work approach, collaborative culture, and ability to deliver client solutions. We believe employee ownership drives the sustainability and growth of our firm and provides all our employees with opportunities for financial success. If you are looking for a challenging and rewarding career in a friendly environment, please submit your resume by visiting the Careers section of our website at http://www.wadetrim.com/careers. Wade Trim does not accept unsolicited resumes, candidate profiles, or CVs from third-party recruiters or employment agencies. Any submission made without a valid, signed agreement and an approved engagement request from Wade Trim’s People Services Team will be considered the property of Wade Trim. Wade Trim reserves the right to pursue and hire any candidate submitted through unsolicited means without any financial obligation to the recruiter or agency. A valid agreement can only be signed by the Director of People Services. Resumes or candidate profiles submitted at the request of a Wade Trim employee who is not authorized by the People Services team do not constitute a valid engagement. Recruiters and agencies must have a current, written agreement authorized by the Director of People Services to be considered an approved vendor. Wade Trim is an Affirmative Action/Equal Opportunity Employer.

Job Description Logistics Sales Representative QQR Logistics | Cincinnati, Ohio (U.S.) Onsite Only QQR Logistics keeps critical freight moving for supply chains that can't afford to stop. We combine QQR Transport's owned asset fleet, large fully vetted dedicated carrier pool, and 3PL brokerage capacity — giving shippers contract, dedicated, and surge spot capacity. QQR delivers unmatched disciplined execution, and one accountable, loyal team focused on service, security, and safety. QQR moves freight across North America — including cross border Canada and Mexico — for mission-critical supply chains in automotive, manufacturing, pharmaceutical, aerospace, energy, and more. QQR’s core strengths are in the FTL verticals of dry van, refrigerated, flatbed, specialized flatbed, tanker and specialized petrochemicals, and gas transportation — and expedite shipping for customer critical shipments through expedited Sprinter van and Box trucks. Role Overview We're seeking experienced transportation sales professionals that fit QQR’s core strengths, that excel in operating within a cradle-to-grave environment and are ready to grow their career in an entrepreneurial environment. If you are looking for a company that lets you operate independently while providing the infrastructure to grow, this is the opportunity for you. What You’ll Earn Top performers earn $70k+ in year one Career advancement and leadership growth Thrive in a collaborative, entrepreneurial, startup environment and culture Long-term stability with a growing logistics company where you are given the independence and opportunity to make an impact $60,000 base salary + uncapped commission (day one) What You'll Do (Mostly) Manage the full freight lifecycle: prospect → quote → book → cover → close Build and maintain strong relationships with shippers and carriers Negotiate rates and manage profitability across your freight Operate independently while collaborating with a supportive team Own your accounts and grow your book of business through grit and relentless customer service What You’ll Do (In Corporate Speak) • Prospect and build a pipeline of new business opportunities through outbound phone calls, emails, networking events, trade shows and on site meetings, • Build and nurture customer relationships through proactive outreach, regular client engagement, and actively closing new business opportunities, • Conduct in-person visits with existing and prospective clients throughout the assigned territory, targeting three to four field days per week, • Partner with branch leadership to ensure alignment on forecasting objectives, business development planning, and sales pipeline management, • Exercise sound judgment and the ability to effectively reprioritize tasks in a fast-paced, dynamic work environment, • Serve as a cross-functional liaison between internal departments to deliver a consistent and positive end-to-end customer experience, • Engage with multiple stakeholders and decision-makers at varying organizational levels to gain a thorough understanding of each customer's operational challenges and supply chain objectives, • Develop and present customized logistics solutions that create measurable value and align with the client's broader business goals, • Contribute meaningfully to the regional sales team by consistently meeting net new revenue goals while actively sharing market insights, best practices, and collaborative ideas that elevate overall team performance, • Identify, target, and schedule face-to-face meetings with prospective new clients within the designated branch territory, • Maintain accurate and current records within the company CRM platform, with updates completed no less than once per week, • Sustain ongoing client relationships to support account health and long-term retention, working in close coordination with the assigned Account Executive or Account Manager, • Timely follow-up on inbound sales leads generated through overseas offices or directed by sales leadership, • Actively participate in company-provided training programs designed to strengthen relevant industry knowledge and sales capabilities, • Collaborate with the Sales Coordinator to prepare competitive quotes and manage a smooth onboarding handoff of new accounts to the appropriate Account Executive or Account Manager Tools & Support Provided Access to HubSpot for pipeline and customer management Use AI tools and QQR Technology to work more efficiently, increase your output, and build a consistent growing sales pipeline Access to ZoomInfo for prospecting and business development A leading, AI- and automation-driven TMS platform Full back-office support: billing, collections, carrier setup, and compliance Dedicated assets that provide the base capacity that you can sell the value add Strong internal team support so you can stay focused on selling and growing What Sets You Apart Competitive and driven mindset Strong communication and people skills Motivated by money and growth Resilience and coachability Comfortable making outbound calls and writing targeted, compelling emails — exceeding daily activity goals Consistent, repeatable production Established customer relationships Strong negotiation and communication skills Ability to work independently, own and grow your business What Success Looks Like Within your first 12 months, you will transition and grow your book of business on QQR's platform, deepen your shipper and carrier relationships, increase load volume and margin across your freight, and build a repeatable pipeline that supports continued growth. Why Join QQR? Exceptional transportation companies are built by exceptional people. We give our people the autonomy, resources, and support to make a real impact. Not only for the company and customers, but for their families and themselves. QQR cultivates a culture that you will be proud of! Apply Today Submit your application through this posting. We review every submission and will reach out to qualified candidates directly. Compensation $60,000 base + uncapped commission year 1 The compensation range shown for this position represents the floor and ceiling of base pay applicable to this geographic location. An individual candidate's placement within that range will be based on relevant work experience, demonstrated skills, and applicable education or professional training. Please note that the figures referenced in this posting reflect base salary only and exclude any additional variable or incentive-based compensation that may be associated with the role. Equal Opportunity QQR Logistics is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. This position may require periodic travel outside of standard business hours to attend company functions, visit client facilities, and engage with carrier partners for the purpose of capturing video content or photography for use in marketing materials. Candidates must be able to operate a computer, telephone, and related office equipment as necessary to fulfill job responsibilities. The typical work environment features an open-concept office setting with noise levels consistent with standard office activity. Employees should expect periodic interruptions during the course of the workday. The role primarily involves sustained periods of sitting, along with regular verbal communication and active listening. This organization is an equal opportunity employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status as defined under applicable law, or protected veteran status. Employment visa sponsorship is unavailable for this position. Applicants requiring employment visa sponsorship now or in the future (e.g., F-1 STEM OPT, H-1B, TN, J1 etc.) will not be considered. Requirements What You Bring (Required) High school diploma or GED (some college preferred) 2+ years of experience in logistic sales or operations (preferred FTL) Preferred, industry contacts or a current book of business Proven track record of consistent production Strong customer relationships with repeat freight Demonstrates skill of managing internal and external customer expectations Ability and desire to work in a fast-paced environment Experience using TMS and CRM platforms (HubSpot or similar a plus) Benefits Benefits Comprehensive benefits package Health, dental and vision coverage 401(k) with company match 3% Health and wellness discounts

Job Description LOCATION: Frederick Steel Co - Cincinnati, OH (Frederick Steel is a subsidiary of Benjamin Steel Co)JOB TITLE: WarehousePOSITION SUMMARY:Performs a variety of warehousing duties, which requires an understanding of the Company's storage plan. Work involves most of the following: verifying materials against receiving and shipping documents, noting and reporting discrepancies and obvious damages; routing material to prescribed storage locations by proper methods to protect material and employee safety; rearranging and taking inventory of stored materials; examine stored materials and reporting deterioration and damages; removing material from storage and preparing it for shipment. May operate various equipment to stage, locate or process material for shipment.DUTIES AND RESPONSIBILITIES: · Accurately locate and identify stock for storage and retrieval using scanner when appropriate. · Safely operate related machinery and equipment. · Properly identify, scan and process paperwork necessary for material handling. · Correctly load and unload trucks and verify load with delivery tickets and scanner. · Properly tag, band, and package material for shipment. · Maintain a clean and safe work area. · Always be helpful and courteous to all customers and employees. · Perform other duties as related or assigned for the benefit of the Company. · Good attendance is an essential function of this job.EDUCATION AND EXPERIENCE:High School Diploma or GED.Previous shipping and receiving experience helpful.Overhead crane and forklift experience preferred.Must be able to read a tape measure.KNOWLEDGE, SKILLS AND ABILITIES:Ability to work as a team member without close supervision to meet Company and personal goals.Capable of reading a tape measure, calipers, and orders.Able to recognize different colors.Good reading, writing and math skills as measured by a pre-employment test.Ability to meet physical demands of position which are required 95% of the work day (i.e. lifting up to 50 lbs independently, pushing, pulling, standing, climbing).

Job Description R&D Engineering Technician Location: Cincinnati, OH (100% On-Site) Get hands-on with technology that gives medical devices a second life. Vein360 is looking for an R&D Engineering Technician to join our growing R&D team, playing a hands-on role in designing, developing, and testing the processes behind remanufacturing and reprocessing medical devices. Working closely with our engineering team, you'll apply your technical skills across the full product development life cycle from prototyping through pilot production. This position is based full-time at our Cincinnati, OH facility. It is not eligible for remote or hybrid work. Why This Role Matters You'll be the technical backbone of our R&D lab. Building, testing, and troubleshooting the systems that bring innovative device restoration processes to life. If you're a curious problem-solver who loves working with your hands as much as your head, this is a great place to grow your engineering career. What You'll Do • Provide technical assistance and innovative solutions when engineering challenges arise, • Assemble electro-mechanical systems and processes per engineering documentation and specifications, • Set up and operate test equipment to evaluate device and system performance under simulated conditions, • Diagnose, debug, test, upgrade, maintain, and repair devices, instrumentation, and test systems, • Collaborate with engineers and cross-functional teams to identify and resolve design and manufacturing issues, • Partner with vendors and assembly houses to troubleshoot manufacturing concerns, • Write clear, detailed test reports documenting system performance, malfunctions, and design deviations, • Record, analyze, and interpret test data to support design problem-solving, • Build, calibrate, maintain, and repair product, prototyping, and test equipment, • Support R&D lab operations, including component ordering, stock management, and calibration tracking, • Perform light assembly work in pilot production as needed, • Support Quality Assurance with incoming acceptance activities, • Comply with corporate environmental health and safety programs, including bloodborne pathogens and hazard communication protocols, • Confidently operate test and measurement equipment such as oscilloscopes, voltmeters, Instron testers, micrometers, and calipers What You Bring • AA/AS degree in Electrical, Mechanical, Industrial, or related Engineering field, or equivalent experience, • 2+ years of relevant technician experience (labs, internships, etc.), • Familiarity with engineering software platforms such as AutoCAD, SolidWorks, LabVIEW, or MATLAB preferred, • Basic knowledge of electro-mechanical assemblies and hands-on technical aptitude, • Proficiency in Microsoft Office, • Working knowledge of basic statistics, • Strong analytical and problem-solving skills, • Solid technical writing ability, • Collaborative, organized, and dependable with strong time management Why Join Vein360 You'll gain hands-on experience across the full engineering life cycle, working alongside experienced engineers on meaningful, sustainable medical technology with real opportunities to grow your skills and your career. Organizational Relationship / Scope • Reports to the R&D Manager or designee, • Requires effective communication, interpersonal, and teamwork skills, • Well-organized self-starter comfortable working in a cross-functional environment, • Able to take direction while managing own workload independently Working Conditions Engineering laboratory and office environment, including limited handling of clinically soiled product. Equal Employment Opportunity Statement Vein360 is an Equal Opportunity Employer. Employment decisions are based on business needs, job requirements, and individual qualifications. Vein360 does not discriminate on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law. Vein360 is committed to providing reasonable accommodations to qualified individuals with disabilities in the application process and throughout employment, as required by applicable law. Disclaimer This job description and above statements are intended to describe the general nature and level of work performed by individuals assigned to this position. They are not intended to be an exhaustive list of all duties, responsibilities, qualifications, or working conditions. Duties, responsibilities, and activities may change at any time, with or without notice, based on business needs.

Job Description POSITION SPECIFICATION Position: Senior Electrical Engineer Department: Utilities & Central Energy (UCE) Reporting Relationship: Senior Project Manager, UCE COMPANY BACKGROUND KFI Engineers is a recognized industry leader in facility infrastructure design and performance. Since 1996, our culture of collaboration and unique capabilities have allowed us to make a difference in the way infrastructure and processing projects are delivered. Headquartered in St. Paul, MN, with numerous regional offices throughout the United States, and a team of hundreds of professionals, we offer opportunities to continue your career with mentorship programs, career growth support, and continued education. With KFI, we find a way to provide creative solutions to unique projects while providing the same care we would expect if we were the client. For more information about KFI Engineers and our culture, please visit www.kfi-eng.com. The Utilities & Central Energy (UCE) group specializes in large central plant work, particularly for district energy serving cities, universities, hospitals, and manufacturing campuses. Our expertise covers both energy production and distribution. We have expertise in sustainable energy production, simple and combined cycle, combined heat and power, and medium voltage power. Our clients look for us to lead large complex projects from concept to completion, including startup, check-out, and commissioning. POSITION OVERVIEW & RESPONSIBILITIES The Senior Electrical Engineer (level IV) plays a key role in the successful execution of projects from start to finish. This individual will provide technical and engineering excellence, as well as successful delivery of work to our customers. The Senior Electrical Engineer is responsible for a high level of customer satisfaction by ensuring expectations are clearly communicated and managed. The successful candidate will also contribute to a dynamic team environment by being proactive, communicating clearly to all stakeholders, and modeling a highly collaborative working environment. This person will also actively support the business development process, through the writing of proposals and meeting with prospective and current customers. Specific responsibilities will include, but not be limited to, the following: • Designs and supports power distribution systems (primary requirement), including sizing motor feeders and starters., • Designs medium‑voltage and 480‑volt power systems, including generation and distribution, for industrial, utility, and building applications., • Designs building power and lighting systems, including special systems such as ground fault protection, lightning protection, emergency generators, UPS, DC systems, motor control centers, and power factor correction., • Performs power system studies, including load flow, short‑circuit, arc‑flash (arc fault hazard analysis), protective device coordination, voltage drop, and harmonics studies, using SKM PTW., • Prepares engineering documents and equipment specifications to meet contracted scope of work and applicable codes and standards, ensuring proper application of Electrical Engineering principles., • Reviews and approves contractor and vendor submittals, including final equipment selections., • Creates project plans and schedules for execution of work., • Develops labor and cost estimates for assigned scope of work and is accountable for maintaining scope and budget compliance., • Coordinates work with other departments, disciplines, project team members, subcontractors, and contractors., • Provides construction observation and inspection services, field support, and startup and commissioning assistance for electrical systems and equipment., • Provides technical and engineering support, guidance, and work direction to other departments, disciplines, and subcontractors, as assigned., • May serve as project manager for complete projects, when assigned., • Supports the business development process through proposal input, customer meetings, and interviews., • Other duties as assigned. QUALIFICATIONS Required • Bachelor’s degree in Electrical Engineering, Electrical Engineering Technology, or similar related field., • Minimum of 10+ years of Electrical Engineering experience., • Professional Engineering registration or willingness to pursue this designation., • Demonstrated proficiency in the design of electrical utility generation and distribution systems., • Proven project experience and/or working knowledge of Process, Instrumentation, and Controls., • Comprehensive understanding of Electrical, Mechanical, Architectural, Civil and Structural Engineering construction practices., • In-depth knowledge of industry codes and standards (NEC, NFPA, NESC, ANSI/IEEE, etc.)., • Proven ability to build strong client relationships and establish credibility with internal and external stakeholders., • Ability to present complex information to diverse audiences, synthesize ideas into actionable recommendations, and positively influence outcomes., • Strong planning, analytical, organizational, and problem-solving skills., • High attention to detail with the ability to manage multiple priorities, • Excellent communication, interpersonal, and collaboration skills., • Expert knowledge of technology and the application of technology in business., • Travel: May include up to 25% domestic travel. Preferred • Strong electrical design expertise across various industries, including infrastructure projects and/or plant operations., • Demonstrated leadership and supervisory or people-management experience. Working Conditions • Some work locations will feature the tough terrain typical of construction sites. CORE BEHAVIORS Accountable • Demonstrates persistence in the achievement of goals., • Acts with a sense of urgency., • Takes responsibility for own actions. Business Focus • Demonstrates agility, adapts well to changes., • Works well under pressure., • Meets commitments to internal/external customers. Project Execution • Plans projects well, managing last-minute rushes and disruptions., • Balances Speed and Quality., • Looks for improvement in our delivery, tools and processes., • Other duties as assigned. Demonstrates Respect for Others • Keeps others adequately informed., • Exhibits objectivity and openness to others' views., • Adapts communication style and method based on audience and situation. Team Player • Balances team and individual responsibilities., • Shares expertise with others., • Inspires respect and trust. Managing People • Develops employees’ skills and encourages growth., • Consistently provides timely feedback to employees., • Delegates effectively, providing clear direction and authority to act. Benefits: At KFI, our comprehensive benefit program provides our employees with the resources to support their health, wellness and financial well-being. Full-Time employees have access to: • Health, dental and vision insurance coverage, • Virtual health services, • Health Savings Account (HSA) & Health Reimbursement Account (HRA) for HDHP enrollees with KFI contributions, • Flexible Spending Account, • 401(k) plan, • Short-term and long-term disability insurance, life and AD&D insurance, • Employee Assistance Program, • Paid Time Off to include Earned Sick and Safe Time in accordance with state laws, • Paid Volunteer Time Off, • Company Paid Holidays, • Tuition Reimbursement, • Bereavement Leave, • Voluntary benefits offered include life, accident, critical illness coverage Salary Range: $125,000 - $155,000 annually. The final agreed upon compensation is based on individual qualifications, experience, work location, and education. This position is eligible for an annual bonus. Please note this job description is not designed to cover a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This position is not eligible for Visa sponsorship. Equal Opportunity Employer – Veterans and Disabilities

Job Description JOB TITLE: Burn Machine OperatorSUPERVISED BY: Warehouse Superintendent/Warehouse SupervisorPOSITION SUMMARY:Specializes in operating one or more burning machines to burn plate in various shapes. Planning and performing operation which requires set-ups with a high degree of accuracy; install burning tips, and adjust guides, stops, working tables and other controls to handle the size of stock to be processed; determine proper pressures, feeds, speeds, tips and operating sequence. May be required to recognize when tools and tips need changed. Requires blueprint knowledge.DUTIES AND RESPONSIBILITIES: Accurately locate and identify stock for storage and retrieval. Safely operate and maintain/clean related machinery and equipment. Safely operate and adjust machinery and equipment for full utilization. Accurately process material to minimize waste and drops. Capable of adjusting machinery for full utilization of material with minimal waste. Notify Supervisor when oxygen, gas and equipment needs to be replaced. Properly identify and process paperwork necessary for material handling/Production Recording. Maintain proper records when required. Perform Warehouse functions when needed and when processing work is not available. Maintain a clean and safe work area. Always be helpful and courteous to all customers and employees. Perform other duties as related or assigned for the benefit of the Company.Good attendance is an essential function of this job.EDUCATION AND EXPERIENCE:High School Diploma or GED.Experience in making templates and some drafting.Previous burning machine experience.Overhead crane and forklift experience preferred.Excellent math, geometry, measurement and PC skills.KNOWLEDGE, SKILLS AND ABILITIES:Ability to work as a team member without close supervision to meet Company and personal goals.Capable of reading orders, a tape measure, calipers, and blueprints and use of a square.Capable of using a gas/oxygen torch.Excellent eye-to-hand coordination.Excellent reading, writing and math skills as measured by a pre-employment test.Ability to meet physical demands of position which are required 80% of the workday (i.e. lifting, pushing, pulling, standing, and climbing).

Job DescriptionDescription: The Book Production Administrative Assistant will accurately and effectively perform a variety of administrative, production and miscellaneous responsibilities pertaining to the production of braille book publication from start to finish. Essential Duties: · Reflects Clovernook’s mission, vision and core values in daily interactions with consumers, staff, as well as all internal and external constituencies. · Shares agency news for everyone without email. · Enter new books into scheduling software. · Enter book production status information into Clovernook scheduling software. · Enter book production status information into NLS MediaPulse software. · Print and distribute updated book schedules. · Maintains book warranty replacement report. · Order book division raw materials and general office supplies. · Maintain book division raw material inventory. · Create all shipping labels and packing slips for NLS books. · Emboss, perform OBR (Optical Braille Recognition) comparison, and prepare regular book control copies for shipment to NLS Quality Assurance. · Emboss regular book production volumes. · Rivet books into hard covers. · Remove pages from covers of print books for Print/Braille books and cut to size. · Emboss print/braille plastic pages. · Collate print and braille pages for print/braille books. · Drill rivet holes for print/braille book covers. · Cut labels and materials as needed on industrial cutter. · Follow all safety procedures and promote a safe work environment. · Maintain positive relationships with co-workers and supervisors. · Other duties as assigned. Requirements: Job Requirements: 1. HS Diploma or GED., 2. Proficient P/C skills (MS Word, Excel, etc)., 3. Ability to learn basic braille words and numbers a must., 4. Must have a good command of the English language., 5. Strong reading & writing skills., 6. Ability to lift 25 lbs., 7. Must be detail oriented., 8. Basic math skills and ability to read labels, packing slips, cartons, etc., 9. Post-offer, pre-employment drug screening, and criminal background check.

\n \n \n \n \n \n \n If you are a current associate, you will need to apply through our internal career site. Please log into Workday and click on the Jobs Hub app or search for Browse Jobs. \n \n \n \n \n \n \n\n \n \n LOCUM VETERINARIAN \n The pay range for this role is $120 - $140/hour. \n The pay range listed reflects a general hiring range for the area, with the specific rate determined based on the candidate’s experience, skill level, abilities, and education, and may vary depending on location. \n \n SUMMARY OF JOB PURPOSE AND FUNCTION \n The primary purpose and function of the Locum Veterinarian is to provide preventative care, diagnosis and treatment of diseases and injuries of Pets. \n \n ESSENTIAL RESPONSIBILITIES \n\n • Ensure the Safety of Pets, clients and associates by utilizing safe restraining techniques, following standard protocols and maintaining clean, sterile and organized treatment areas, exam rooms and labs.\n, • Obtain relevant information and history from clients, and maintain proper and complete medical records.\n, • Educate clients about preventative care, Pet health needs, any diagnosis or treatment, hospital services and other related information.\n, • Provide professional, efficient and exceptional service including prescribing and administering preventative care for the wellness needs of Pets and diagnosing and treating diseases and injuries of Pets.\n, • Effectively communication diagnosis and treatment plan to veterinary medical team and client.\n, • Ensure local, state and federal laws are followed, including proper maintenance of the controlled substance inventory log.\n, • Understand and follow state guidelines regarding duties of veterinary assistants and licensed veterinary technicians.\n, • Other job duties as assigned.\n\n \n HIRING QUALIFICATIONS \n CAPABILITIES AND EXPERIENCE (CAN DO) \n\n • Ability to multi-task - Manages multiple tasks at one time; quickly and accurately shifts attention among multiple tasks under distracting conditions without loss of accuracy or appearance of frustration.\n, • Communication skills - Reads, writes and speaks fluent English, using appropriate grammar, style and vocabulary. Correctly spells commonly used English words and\n, • job specific terms. Demonstrates exceptionally strong written and verbal communication skills.\n, • Organizational ability - Demonstrates a systematic approach in carrying out assignments. Is very orderly and excels at cutting through confusion and turning chaos into order.\n, • Surgical skills - Proven ability to perform all basic surgeries, including use of all standard medical instruments and equipment.\n, • Problem solving skills - Demonstrates a strong ability to identify, analyze and solve problems. Unusually decisive in handling difficult problems. Translates problems into practical solutions.\n, • Client service skills - Consistently ensures the team provides the client with attentive, courteous and informative service. Gains and shows personal satisfaction from delivering great service.\n, • Intellectual ability - Accurately and consistently follows instructions delivered in an oral, written or diagram format. Can provide directions.\n, • Compassionate commitment to Pet care - Ensures hospital teams confidently present Pet treatment recommendations and associated fees as an advocate for the Pet, gaining the client's agreement to proceed with the treatment most appropriate to the Pet's current condition and long-term health. Act as an advocate for the Pet.\n, • Mathematical ability - Ability to add, subtract, multiply and divide, and to compute rate, ratio and percent; ability to convert units of measurement.\n, • Computer skills - Comfortably and confidently uses a computer and specialized software. Microsoft Word, Excel, Access, Outlook, etc.\n, • Management ability - Effectively enforces policies. Achieves high productive output while maintaining high morale. Encourages efforts toward common goals. Understands and utilizes a coaching/counseling philosophy for performance management.\n\n \n ATTITUDES (WILL DO) \n\n • Initiative - shows willingness and aptitude to use own discretion in taking appropriate steps in finding solutions to problems; presents options and ideas to enhance current processes or procedures. Takes on additional responsibility when both big and small tasks need to be done.\n, • Integrity - Firmly adheres to the values and ethics of Banfield, Pet Hospital. Exhibits honesty, discretion, and sound judgment.\n, • Cooperativeness - Willing to work with others, collaborating and compromising where necessary; promptly share relevant information with others.\n, • Flexibility - Is open to changing situations and opportunities and is willing to perform all tasks assigned.\n, • Independence - Able and willing to perform tasks and duties without supervision.\n, • Tolerance for Stress / Resiliency - Maintains a positive "can do" outlook, rebounds quickly from frustrations and unpleasantness, and maintains composure and friendly demeanor while dealing with stressful situations.\n\n \n SPECIAL WORKING CONDITIONS \n\n • Ability to be confident around Pets (i.e., dogs, cats, birds, reptiles, etc.)\n, • Client needs and work volume may often require more than 40 hours per week to complete essential duties of this job. This position requires special hours, including working weekends and evenings.\n, • Must have mental processes for reasoning, remembering, mathematics and language ability (reading, writing, and speaking the English language) to perform the duties proficiently.\n, • The noise level in the work environment is moderately high.\n, • Ability to carry out instructions furnished in written, oral, or diagram form and to solve problems involving several variables.\n, • Requires sufficient ambulatory skills in order to perform duties while at hospital.\n, • Ability to stand, walk, stoop, kneel, crouch, and climb as well as manipulate (lift, carry, move) up to 50 pounds.\n, • Requires good hand-eye coordination, finger-hand-arm dexterity with the ability to reach and grasp, and visual acuity to use a keyboard and operate equipment.\n, • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.\n, • Associate is routinely exposed to a variety of Pets that may bite or scratch, and on occasion, exposed to anesthesia, radiation, biological hazards and medication/controlled substances.\n, • Minimal travel required, possibly for vendor visits and associate education.\n\n \n EXPERIENCE, EDUCATION AND/OR TRAINING \n\n • Doctor of Veterinary Medicine (DVM/VMD) or equivalent degree required.\n, • License in good standing with the applicable state veterinary board.\n, • License with the Drug Enforcement Agency required.\n, • Proven ability to perform all basic surgeries, including use of all standard medical instruments and equipment.\n\n \n BENEFITS \n Here at Banfield, we prioritize your well-being and professional growth by offering a comprehensive total rewards package, including health, wellness, and financial support for you, your family, and even your pets. Check out some of our “Meow-velous” benefits to our Locum Veterinarians: \n\n • Commuter Benefits: Say goodbye to commuting stress with our commuter benefits, making your daily journey more convenient and cost-effective.*\n, • Continuing Education Resources: Access to VetFolio for online CE courses, webinars, and conference proceedings from NAVC and AAHA, as well as access to the MVH Medical Library which provides access to 2000+ university-equivalent journals, 600+ textbooks, and biomedical databases.\n, • Three Free Optimum Wellness Plans for Pets: We care about your furry friends too! Enjoy three free wellness plans to ensure your pets receive the best preventive and general care.*\n, • Exclusive Discounts: Unlock a world of savings with our wide variety of exclusive discounts on products and services, making life more affordable and enjoyable.*\n\n \n In addition, our benefit offerings for full or part-time Veterinarians include: \n\n • Comprehensive Medical, Dental, and Vision Insurance: Enjoy peace of mind knowing your health and wellness are our top priorities. We've got your essential medical, dental, and vision care covered.\n, • Generous Retirement Plans (401(k) and Roth): Invest in your future and enjoy a generous company match to help you build a secure financial future.*\n, • Best-in-Class Student Debt Relief Program (for Full-Time DVMs): At Banfield, we understand the significant financial burden of student debt on veterinarians. We are committed to supporting our veterinary professionals and believe that addressing student debt is crucial for the long-term health of the veterinary profession.\n, • Paid Time Off and Holidays: Take a break, recharge your wellbeing, and celebrate days of personal significance with paid time off and holidays.*\n, • Top-Tier Mental Health and Wellbeing Resources: Your mental health matters. Access our industry-leading resources, including free coaching and counseling sessions, to support your overall wellbeing and help you thrive.*\n, • Associate Life Insurance (company-paid) & Supplemental Life Insurance: Protect your loved ones with our company-paid Associate life insurance and have the option to purchase additional coverage for extra peace of mind.\n, • Company-Paid Short- and Long-Term Disability: Feel secure knowing that if you face a temporary or long-term disability, you’ll have financial protection.\n, • Flexible Spending Accounts (FSA): Save on healthcare and dependent care expenses by setting aside pre-tax money. It's a smart way to manage your budget and take care of your needs.\n, • Health Savings Account (HSA): Make the most of your healthcare dollars with a tax-advantaged HSA, allowing you to pay for medical expenses with pre-tax funds.\n, • Paid Parental Leave: We support growing families with paid parental leave for both birth and adoption, giving you precious time to bond with your new family addition.\n, • Continuing Education Allowance (for Eligible Positions): Banfield is committed to supporting the professional growth of our Associates. This allowance provides financial assistance to pursue continuing education opportunities.*\n, • Back-Up Child and Elder Care & Family Support Resources: When life's unpredictable moments arise, our backup care and family support benefits provide the help you need to keep things running smoothly.*\n, • Fertility and Family Building Support: We're here for you on your journey to parenthood, offering comprehensive support for fertility treatments and family-building options.\n, • Digital Exercise Therapy: Stay active and healthy with our digital exercise therapy program, designed to fit your busy lifestyle, and keep you moving.\n, • Voluntary Protection Benefits: Get peace of mind with protection against the unexpected. You can purchase coverage to help support you financially during hospital stays, critical illness, and accidents.*\n, • Legal Plan: Gain extra peace of mind with our affordable and accessible legal plan which includes coverage for a wide range of legal needs.*\n, • Identity Protection: Identity Protection helps safeguard your personal information by alerting you to suspicious activity and providing support if your information is stolen.*\n, • Benefits eligibility is based on employment status. Full-time (FT) Associates are eligible for all benefit programs (Student Debt Program available for FT DVMs only); Part-time Associates are eligible for those benefits with an asterisk (*).\n\n \n \n WE ARE A DRUG-FREE, SMOKE-FREE, EQUAL OPPORTUNITY EMPLOYER. Banfield Pet Hospital® strongly supports and values the uniqueness of all individuals and promotes a work environment where diversity is embraced. Banfield Pet Hospital is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity and expression, age, genetic information, status as a protected veteran, or status as a qualified individual with disability. Banfield Pet Hospital complies with all applicable federal, state and local laws governing nondiscrimination in employment in every Banfield location. \n \n We believe that embracing inclusion and diversity enables us to live our Purpose: A BETTER WORLD FOR PETS. \n \n \n \n #LI-KL2

Job Description Position: Line Lead - Food Industry Pay Range: $22.50-$24.50 per hour Shift & Time/ 4:00pm-2:00am Monday-Thursday. Fridays as needed Department: Production Reports to: Shift Supervisor Location: Cincinnati, Ohio 45246 DITSCH USA creates memorable pretzel experiences! We bake artisan pretzels available for both food service and retail markets. As a leading producer of pretzels, we are committed to freshness and providing clean-label products. The quality of our irresistible products comes from more than 100 years of experience and craftsmanship in the ART OF PRETZEL MAKING! We seek those who want to learn and grow within our organization. Ditsch USA offers development options to add to your skill set and open new opportunities for you within our organization. At Ditsch USA you will find a welcoming, safe, and team-orientated environment. As a Line Lead, you'll be responsible for increasing the ratio of value to non-value and eliminating waste of the overall supply chain from start to finish. They ensure the production floor produces a quality product in a safe and cost-effective manner, that meets the production schedule and cost specifications. The Line lead will create an environment where the employees feel valued, challenged and empowered by evaluating the performance and potential of each employee and provide appropriate coaching. Responsibilities: • Foster & maintain a clean and safe work environment, ensuring compliance to safety, health & environmental programs. Participate in GEMBA walks to engage the workforce in behavior-based safety., • Leverage Job Safety Analysis (JSA) & Risk Assessment to mitigate and prevent injuries or incidents – regularly review and update safety procedures based on findings. Collaborate with team members to promote a proactive safety culture and enhance overall workplace safety., • Effectively conduct root cause analyses and implement countermeasures for all incidents to prevent recurrence. Complete thorough and timely investigation reports, ensuring accurate documentation and adherence to company protocols and regulatory requirements. Collaborate with relevant teams to address findings and drive continuous improvement in safety & operational processes, • Adhere to all Good Manufacturing Practices (GMPs) and food handling requirements, ensuring compliance at all times. Monitor and enforce these standards among employees, providing training and guidance as needed., • Ensure job positions are adequately staffed at shift change and oversees operation of the production lines to ensure efficient production, as well as, sanitation, PM work and changeover against the schedule., • Review the production schedule to anticipate and plan for efficient changeovers, ensuring minimal downtime and seamless transitions between production runs. Coordinate resources, materials and team members to align with schedule requirements, and verify that equipment and tools are properly prepared for the next task. Monitor progress to adjust plans as necessary and maintain overall production efficiency, • Accurately completes all production paperwork in conjunction with the other shift lead and works closely with the production schedule to attain daily targets, • Keeps the Supervisor abreast of any employee issues or concerns and makes recommendations for disciplinary actions. Will provide employee feedback related to performance and disciplinary action in the company of the Supervisor., • Manage conflict between team members. Recognizes and resolves non-technical issues that are occurring within the team involving HR when necessary., • Demonstrate knowledge of HR practices. Delivers feedback in a professional and positive manner. Able to adapt your leadership style to work situations. Provides insight pertaining to employee evaluations., • Assist supervisors in revising standard operating procedures, including suggesting changes, writing procedures, revising manuals and communicating updates with employees., • Evaluate performance standards (i.e. required line output & efficiency, changeover times, waste, staffing), ensure they are clearly communicated and accessible, and hold individuals accountable for adhering to these standards and fulfilling their commitments. Follow the appropriate escalation process when necessary to address any issues or concerns, • Assesses or determines the training need for employee(s). Leads effort to plan and complete the training., • Possess a general knowledge of all machine operations, including understanding proper machine settings and ensuring the correct lot numbers are accurately labeled on all products. Maintain familiarity with machine controls, adjustments, and settings to optimize performance and quality output. Regularly verify machine settings, product quality, lot codes, etc. to prevent errors and maintain consistency in production., • Competency is required to operate the label machines efficiently and accurately, using product knowledge to ensure proper labeling throughout the production process. Understanding of specification sheets is required during a production run to verify all aspects are being met, ensuring product consistency and quality. Maintain familiarity with product specifications to address any potential issues proactively., • Ensure cleaning and sanitation duties are being completed as required, maintaining cleanliness and hygiene standards. Follow all cleaning protocols and safety guidelines to uphold quality standards and prevent cross-contamination., • Provide operational support when required to relieve operators. Manage Shift changes, ensuring that the outgoing shift departs on time and coordinating breaks for all team members. Facilitate smooth transitions between shifts to minimize disruptions and maintain efficient production operations., • Communicate any line breaks or gaps in the production process to the supervisor promptly. Provide detailed updates on the impact of these disruptions, along with recommendations for resolution, to ensure minimal impact on production efficiency and maintain a smooth workflow., • Perform other duties assigned by the supervisor. Required Skills/Abilities: • Ability to read, analyze, and interpret common industry, production, and technical documents in English., • Strong mechanical aptitude and problem-solving skills., • Ability to work independently with meticulous attention to detail., • Proficient understanding of production procedures and equipment., • Commitment to maintaining high safety standards., • Strong leadership and communication skills within a team environment., • Proven experience in a fast-paced environment with a focus on quality and safety., • Ability to comprehend and communicate effectively in English., • Basic math skills and ability to work weekends and holidays as needed., • Prior proficiency in equipment uses and operation., • Ability to define problems, collect data, establish facts, and draw valid conclusions. Education and Experience: • High School diploma or equivalent., • Two years’ experience in a manufacturing environment, preferably a food environment., • Prior leadership experience preferred., • Prior experience with Lean manufacturing principles and continuous improvement tools and methodology is a plus., • Knowledge of health and safety regulations., • 80/20 floor to office ratio., • Familiarity with PLC-controlled equipment, preferred. Physical Requirements: • Working conditions are normal for a manufacturing environment., • May be required to work overtime as needed., • Ability to work multiple places on the production line., • Ability to “break out” other team members., • Ability of adjusting or moving objects of varying weights up to 50 lbs. in all directions., • Ability to communicate with others to exchange information., • Repeating motions that may include the wrists, hands, and/or fingers., • Hear sounds and recognize the difference between them., • Ability to withstand various climates through the facility i.e. freezer, dock, production (as low as -15 degrees up to 110 degrees), • Ability to work in an environment with flashing lights, horns, and powered moving equipment operating in proximity., • Moving about to accomplish tasks or moving from one worksite to another., • Prolonged periods of sitting, standing, walking and/or remaining in a stationary position and often standing or sitting for prolonged periods., • Ability to move self into different positions to accomplish tasks in various environments including tight and/or confined spaces., • Must be physically able to ascend and descend ladders, stairs, ramps, poles and scaffolding., • Excellent hand/eye coordination., • Ability to bend, stretch, twist, or reach out., • Adjust body movements or equipment controls to keep pace with speed changes of moving objects., • See details of objects that are less than a few feet away., • See differences between colors, shades, and brightness., • Adaptability to work in diverse environments and surfaces., • Ensure compliance with GMPs and maintain a clean work environment., • Wear Personal Protective Equipment as needed., • Stand and move around the manufacturing floor for up to 10 hours., • Capability to stand, walk, squat, and perform repetitive tasks. If you're seeking a role where your continuous improvement mindset, mechanical aptitude and leadership skills shine, apply today and become an integral part of our innovative team. What we offer you (perks, bonuses, benefits): • Medical, Dental, and Vision insurance, • Automatic, FREE $25,000 life insurance policy, • Flexible Spending Account (FSA) and Health Savings Account (HSA) options, • Additional voluntary life, AD&D, Critical Illness, and Short-Term Disability, • 401k Retirement Plan with Match, • Paid Time Off (PTO) & Holidays, • Ongoing training and development Please note this job posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee in this role. Duties, responsibilities, and activities may change at any time with or without notice. The physical requirements are representative of those an employee may encounter while performing the job's essential functions. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. For more information, visit www.ditsch.com/en Recruiters We are not accepting resumes/referrals from outside recruiters unless we have signed a contract. We value our relationships with our recruiting partners and all potential candidates. As a recruiter, if you share a resume/referral and we do not have a signed agreement, we still may contact the candidate and reserve the right to not engage your recruiting partnership. Ditsch USA, is an equal-opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Job Description Company: Yugo Community: Yugo Cincinnati Deacon Location: Onsite Position Title: Student Ambassador Position Classification: Hourly / Non - Exempt Compensation: $14.50/ hr. Yugo is a global leader in student housing dedicated to creating exceptional living experiences for students around the world. With a presence spanning more than 14 countries and 120 cities, Yugo combines innovation, community, and purpose to redefine student living. In the U.S., Yugo operates nearly 40,000 beds across 88 properties in 28 states, delivering vibrant communities designed to support student success both personally and professionally. Guided by its Live Your Best Life philosophy, Yugo fosters sustainability, personal growth, and career development while building an inclusive, collaborative, and forward-thinking culture for residents and team members alike. As the Student Ambassador, you will be a key player in our apartment community, reporting to the General Manager. You will handle all aspects of leasing and marketing while ensuring positive resident relations. Your role includes managing apartment rentals, overseeing move-ins and lease renewals, generating and handling leads, qualifying prospects, preparing lease documentation, and completing move-in procedures according to company policies. Requirements Reporting to the General Manager, here’s what you’ll be doing! • Greet prospective clients, conduct property tours, and use product knowledge to showcase features and benefits., • Complete applications, secure deposits, and process lease paperwork for move-ins and move-outs., • Handle phone calls and in-person inquiries, maintaining guest cards and following up with prospects., • Prepare and submit applications for approval, ensure readiness of apartments for move-in, and orient new residents., • Assist with lease renewals, accept rental payments, and support marketing and sales efforts., • Support marketing and sales initiatives, maintain up-to-date market information, and participate in weekly leasing activity meetings., • Update reports, monitor market conditions, and provide insights for community improvements., • Manage service requests, plan resident functions, and maintain accurate commission records., • Participate in outreach marketing, maintain community appearance, and enforce policies and procedures., • Ensure compliance with Fair Housing laws and company policies, and contribute to a positive team environment., • Ensure the office and model apartments are clean and open on schedule, communicate policy changes, and support the community team., • Maintain flexibility with work schedule, including evenings and weekends, and perform additional tasks as needed., • And so much more! Sound good so far? Here’s what you’ll need to thrive in this role! • Relative experience in an administrative role, • Great customer service and communication skills, being able to effectively engage with people at all levels (orally and in writing), • Ability to be proactive with strong problem-solving skills and initiative., • Highly organized individual with the ability to take on multiple tasks regularly., • Intermediate skills in using MS Office and online systems / databases., • Resilience and adaptability, as well as a great cultural diversity awareness., • Ability to maintain open communication with General Manager and Maintenance Supervisor., • Be available to work 20-25 hours per week. Benefits As part of the Yugo team, you are eligible for a competitive salary, bonus eligibility, comprehensive benefits and more! Here’s a snapshot of what we offer; • Competitive hourly pay, • Lease and renewal commission opportunity, • 401k + 4% employer matching, • Paid Wellness Time, • 1 Paid Volunteer Day, • 1 Paid YuDay At Yugo, we believe in creating a culture where everyone belongs and feels empowered to do their best work. If you're looking to make an impact in a people-first environment, apply today! Equal Opportunity Employer We are proud to be an Equal Employment Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, disability, protected veteran status, or any other status protected by applicable law.

Job Description TITLE: Therapist, Behavioral Health RESPONSIBLE TO: Clinical Supervisor WORK AREA: Outpatient office. SUMMARY: The Behavioral Health Therapist's primary role, under the direction of the Clinical Supervisor, is to utilize their specialized clinical knowledge and advanced clinical skills in counseling, diagnostic interviews, assessments, and preparation and delivery of treatment plans for children, adolescent, and adult patients. The Behavioral Health Therapist will provide therapy sessions for individuals, groups, and families. BLOODBORNE PATHOGEN CATEGORY I: Tasks with actual blood/body fluid exposure are not included in this position’s duties as the job requires therapeutic counseling only. DUTIES AND RESPONSIBILITIES Day-To-Day Responsibilities • Provide individual and group strengths-based therapy to children, adolescents, adults, and families., • Establish clear goals and strategies for the welfare of the client and maintain documentation of services provided and client progress., • Work with the client to develop an individual treatment plan according to OMHAS and CARF person/family-centered standards, review and monitor services and activities, documenting progress., • Support the care team environment by working collaboratively with clients and their families as appropriate, physicians, nurse practitioners, case management, referral sources, and ancillary agencies., • Provide client referrals to psychiatry/nurse practitioners, support groups, or other mental health professionals or agencies, and document services provided per the policies of PATH Behavioral Health, your professional licensing body, and state and federal guidelines., • Participate in care conferences and case reviews, and document and report concerns of abuse or neglect to the appropriate authorities according to the requirements of state/federal law and your licensing body., • Work professionally with referring providers or agencies, court systems, probation departments, foster care agencies, and the school system., • Be committed and respectful of cultural diversity, religious and personal values, and traditions of clients and their families in alignment with the Path’s mission. Day-To-Day Team Member Responsibilities • Willingly serve in a professional and collaborative capacity with all other employees of Path Behavioral Healthcare, fully understanding and complying with all organizational processes and policies. Page Break • Collaborate with all supervisors and coworkers to communicate with transparency and drive implementation of the organization's goals, objectives, and processes., • Maintain an organized practice and schedule, be at work on time and ready to work, and leave work at the completion of client care responsibilities., • Reduce client rescheduling by fully informing the appropriate person of necessary time off work., • Maintain strict compliance with HIPAA guidelines, confidentiality agreements, billing and coding guidelines, and company policy., • Maintain a demeanor of positive professionalism and serve as a model for others to exemplify the mission and vision of Path Behavioral Healthcare. Licensing/Continuing Education • Maintains an active, unrestricted Ohio license to provide clinical counseling services., • Attends all required continuing education opportunities per the regulations of your licensing body. QUALIFICATIONS Education: Candidate must have a Master's degree in Social Work or Clinical Counseling from an accredited university. A Bachelor's degree in Social Work is also acceptable if the candidate holds a valid LSW license. Licensure: Candidates must possess one of the following licenses: LSW, LISW, LPC, or LPCC Experience: Candidates must have a minimum of 3 years of clinical experience, including at least 1 year of experience in an outpatient setting. Physical Effort: This position requires the ability to work under stressful conditions and to work irregular hours. Requires sitting for extended periods of time, viewing computer monitors, and keyboarding. Communication Skills: Candidates must possess excellent verbal and written communication skills in order to communicate professionally via telephone and in writing. Strong grammar and writing skills are crucial for clear and concise communication with clients, colleagues, and other healthcare professionals. Interpersonal Skills: The successful candidate must demonstrate the ability to interact and assist in a friendly, compassionate, and professional manner with colleagues, providers, clients, and their families, as they represent both themselves and Path Behavioral Healthcare. Essential Technical/Motor Skills: Candidates must achieve competency in the Electronic Health Record (EHR) program, telemedicine services, and any additional software programs utilized by the company, ensuring efficient access and updating of client information. The role requires fine dexterity, adept handling, and proficient gripping abilities to perform various tasks. Background: The candidate must pass all federal and state background checks, and their educational and work history will be confirmed in compliance with company policies

Job DescriptionGSS-009 Position: Metal Steel FabricatorSalary: $18.00/hour. Shifts: 3rd Shift - 7:00 pm - 5:30 am (Monday - Saturday). Job Requirements: • Must pass a Pre-Employment Drug Test and Background Check., • Math Test (Fractions and Measurement Test)., • Must have reliable transportation. Position Overview:, • Fabrication of metal structures by cutting, bending, and assembling processes., • Ensure all safety practices are followed and look for continuous improvement., • Use Ajax to size intermediate and finishing mills for setup., • Keeping all stands (1-16) at the designed size., • Maintain communication with mill adjust personnel to ensure the finished product is of prime quality., • Maintain expected production rates., • Inspection of new stands after installation in the mill to ensure proper set-up before rolling., • Maintain constant axle temperatures by adjusting furnace temps when needed. Qualifications and Experience:, • Experience in manufacturing, metalworking and foundry is a plus., • Attention to detail., • Excellent writing skills., • Must be a team player Physical and Mental Demands:, • Ability to stand for long periods of time., • Ability to bend, walk, twist, lift, and turn., • The constant dominant hand activity., • Ability to lift up to 50 lbs., • Ability to use hands and arms in handling, positioning, and moving material., • Strong verbal communication is required. Working Conditions:, • Concrete flooring., • Artificial lighting., • Exposed to outside elements, (building with an open door). Apply now or call Guardian Staffing Solutions at 513-772-4477 for immediate consideration!

Job Description POSITION SUMMARY As a key member of the Family Office Services Team, the Managing Director & Senior Wealth Strategist is responsible for producing and reviewing complex estate and wealth planning deliverables, identifying and developing proactive observations and recommendations, and interpreting complex estate planning documents and financial information. Additionally, the role serves as a key estate planning technical resource for the firm, collaborating with Managing Directors and the client team to prepare for and attend client meetings. The role of the Managing Director & Senior Wealth Strategist also involves providing firm-wide support on tax and estate planning issues, writing and publishing expert articles, maintaining educational materials, and offering subject matter expertise and training to internal associates. DUTIES AND RESPONSIBILITIES: Produces and performs review of complex client estate and wealth planning deliverables • Reviews estate flowcharts and prepares/reviews other complex estate planning technical deliverables., • Develops and reviews observations and recommendations relative to specific planning issues and strategies with an eye toward proactive opportunities., • Develops and reviews technical, complex and comprehensive plans focused on wealth transfer and estate planning ensuring that objectives/observations and information from Managing Directors, Client Service Associates and other members of the broader client cell team are incorporated into the Comprehensive Plan., • Reviews, analyzes and summarizes sophisticated estate planning documents., • Provides guidance for Wealth Strategist in oversight of the administration of various family entities and comprehensive services related to maintaining client’s family office needs., • Develops and maintains, with demonstrated excellence, templates for various estate planning reports, analysis and deliverables., • Anticipates client questions. Serves as an estate planning technical resource to the Managing Directors in preparing for client meeting and in attending meetings • Collaborates with Managing Director and internal client cell team on specific client deliverables, general technical matters and proactive strategies related to various client and internal associate needs., • Demonstrates excellence in serving as an estate planning technical resource in client or advisor meetings., • Participates in client/prospect/advisor meetings as needed., • Participates in feedback/debrief meetings and takes a active approach to continuous improvement. Serves as a technical resource for and to the firm • Provides support, clarity and answers to technical issues/questions related to tax and estate planning., • Researches, writes, and publishes high-quality articles on complex wealth transfer topics for professional journals, industry publications, and online platforms. Ensure all content is accurate, well-researched, and adheres to the highest standards of legal writing., • Meets/communicates regularly with outside advisors for technical estate planning discussions and review, with developed beneficial relationships with outside advisors., • Reviews, develops and maintains FOS technical materials and educational pieces related to estate and wealth planning., • Reviews or creates and maintains estate planning related technical education summaries and materials., • Provides subject matter expertise and training opportunities to internal associates. Performs other duties as assigned QUALIFICATIONS • College degree with a postgraduate degree of JD, L.L.M or MST and/or a professional designation of CPA, CFP® and/or CPWA® and 10 years relevant experience in estate and tax planning and/or fiduciary and trust planning and administration., • Must possess a foundation of technical and business expertise with prior experience in strategic wealth planning for high-net-worth individuals and multi-generational families., • Must have in-depth knowledge of current legislative and case law changes and other technical developments in the estate planning area., • Must have strong analytical skills and the ability to interpret/analyze estate planning documents, financial statements and tax returns with strong attention to detail., • Must have demonstrated excellence in written and verbal communication skills as frequent author and presenter of complex estate planning strategies., • Must have excellent computer skills in Excel with ability to build Excel worksheets relative to complex planning strategies preferred., • Must have ability to explain complex estate planning strategies in a client friendly manner., • Must have a professional demeanor with the utmost respect for confidential matters., • Must be able to work independently and in a team environment., • Must have excellent written and verbal communication skills with strong interpersonal skills., • Must be detail oriented with excellent organizational skills., • Must have ability to multi-task., • Must have ability to work in a fast paced environment., • Must have strong work ethic with a positive attitude. WORKING CONDITIONS • Limited travel as business needs necessitates, • Long periods of sitting utilizing a computer, • 100% onsite

Job Description Do you enjoy being the technical expert people call when they need answers? HealthTronics is looking for an experienced Laser Support Engineer to help strengthen and expand our medical laser service capabilities. This is a highly technical role for someone who knows medical laser equipment inside and out and enjoys troubleshooting complex problems, developing others, and helping build better service processes. In this position, you'll work across technical service, training, parts support, documentation, and field operations. You'll develop and deliver technical training programs, provide advanced support to our Field Service Engineers and customers, perform repairs both in-house and in the field, and help us continue growing our laser service business. If you have deep medical laser experience and enjoy being the person others rely on for technical expertise, this may be a great opportunity for you. Location:We are hiring nation-wide throughout the continental US. Candidates must be located within commuting distance of an airport for occasional travel.What You'll Do Develop, maintain, and deliver technical training programs covering the medical laser systems we service. Serve as a technical resource for Field Service Engineers, Mobile Operations teams, internal staff, and customers. Troubleshoot, repair, and maintain a wide variety of medical laser systems from multiple manufacturers. Perform equipment service and repairs both in-house and at customer locations. Partner with management to support the continued development and expansion of the laser service business. Assist our Electronics and Production teams with developing capabilities to rebuild laser components and parts. Help identify and develop third-party sources for laser replacement parts. Communicate with equipment manufacturers regarding technical updates, field changes, warranty claims, and service information. Maintain and organize technical documentation, manuals, service information, and training materials. Create technical bulletins documenting solutions to complex or recurring service issues. Conduct technical investigations to help resolve customer complaints and equipment concerns. Help support compliance with applicable federal and state regulations governing medical equipment service. Identify technical skill gaps within the field organization and recommend opportunities for additional training or support. Complete special projects and technical assignments as needed. What You'll Need Associate degree in Electronics, Electromechanics, or a related technical discipline, or equivalent relevant experience. Minimum of 8 years of hands-on medical laser service experience. Strong electronics and electromechanical troubleshooting background. Experience diagnosing and repairing a variety of medical laser technologies from multiple manufacturers. Experience developing and delivering technical training programs for medical laser equipment. Technical writing experience, including creating service documentation, procedures, or technical bulletins. Understanding of equipment service contracts and service operations. Demonstrated ability to troubleshoot complex technical problems and provide timely resolutions. Strong written, verbal, telephone, and email communication skills. Ability to communicate professionally with customers, coworkers, manufacturers, and leadership, including during stressful situations. Strong organizational skills with the ability to prioritize and manage multiple technical issues simultaneously. Ability to work independently, exercise sound judgment, and develop creative solutions to complex problems. What You Can Expect Primarily indoor work environment Monday through Friday. Occasional weekend work may be required. Approximately 10-30% travel, depending on business and customer needs. Occasional lifting of equipment or components weighing less than 50 pounds. Regular computer and technical documentation work. Why You'll Love Working Here At HealthTronics, you'll have the opportunity to do more than repair equipment. You'll help shape how we train our technical teams, support our customers, develop our internal capabilities, and grow an important part of our service business. You'll join an organization where your technical expertise is valued and where your knowledge can have an impact across field service, operations, training, and customer support. HealthTronics is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, age, veteran status, disability, genetic information, or any other protected characteristic. HealthTronics will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Visit our website and connect with us! Facebook | Twitter | Instagram| LinkedIn

Job Description JOB SUMMARY Under the supervision of the Engineering Manager, the Staff Electrical Engineer develops creative and technically superior engineering solutions appropriate to each project assigned. PRINCIPAL DUTIES & RESPONSIBILITIES Design Solutions (25%) • Executes high quality design solutions with limited or no supervision, • Delivers engineering design excellence, • Leads development of design concepts, • Develops detailed product documentation that supports high quality production, • Electronics design expertise including but not limited to analog and digital circuit design, PCBs, microcontrollers, sensors, motors, and power supplies, • Ability to perform PCB layout design or modifications for products using PCB design software, • Analog, digital, & microcontroller design using schematic capture software, • Hands-on experience with electronics development and test equipment such as oscilloscopes, DMMs, power supplies, • Ability to design, program, prototype, troubleshoot, and test small and medium sized electronics products, • Embedded language programming at prototype and proof-of-concept levels., • Knowledge of RS232, SPI, I2C, USB, Bluetooth, and WiFi, • Ability to work with and lead a team, • Ability to accurately interpret and drive implementation of changes in design based on feedback from management and/or client Research (20%) • Leads and participates in project research and brainstorming teams, • Attends and participates in meetings with clients, • Objectively observes and understands user research inputs, • Participates in usability tests in order to discover design requirements and validate design concepts, • Participates in observational research as needed to uncover unmet needs Performance Management (20%) • Checks work of other engineers and designers, • Leads and mentors subordinate engineers and designers, • Supports management of scope, schedule and cost, • Assumes the role of technical leader on assigned projects Quality (15%) • Delivers flawless deliverables to client, • Presents to internal and external audiences, • Manages deliverables and timing for self and for team, • Understands and delivers products that meets Kaleidoscope’s standards and when appropriate, international standards and regulations Business Development (10%) • Leads the development of proposals and sizing’s for minor projects or as part of a team on larger projects Continuous Improvement (10%) • Stays abreast of new and evolving technologies, • Maintains expertise in advanced electronics design and programming skills and makes recommendations for investments in skills and technology, • Recommends process changes to improve quality, cost, and schedule This job description is not intended to be all inclusive and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required. QUALIFICATIONS Education/Experience • Must be authorized to work in the U.S., • Minimum BSEE or related degree from an accredited university, • 6-15 years full-time engineering experience Licenses/Credentials/Certifications • N/A Skills/Specialized Knowledge/Abilities • Understanding of latest tools, design practices, and programming languages, • Strong analytical and problem-solving skills, • Proficient in documentation and specification writing, • Demonstrated ability to quickly synthesize and drive towards appropriate solutions, • Basic project management experience, • Proven experience in project ownership and accountability, • Skilled at leading, planning, coordinating, and directing the work of design teams, • Advanced knowledge of Microsoft Office applications: (Word, Excel, PowerPoint, Project, Outlook), • Detailed oriented work style and service, • Advanced ability to work and think in a methodical and logical way, • Advanced ability to prioritize and complete tasks to deliver desired outcomes within allotted time frames, • Advanced ability to work collaboratively with colleagues and clients, • Critical thinker demonstrated by checking thinking for clarity, accuracy, precision, relevance, depth, breadth, significance, logic, and fairness., • Demonstrated ability to write and prepare documents/reports/correspondence in a concise, logical, grammatically appropriate format, • Excellent oral communication skills that demonstrate a professional demeanor, • Excellent listener, • Ability to handle sensitive information and maintain confidentiality, • Ability to stay focused and committed to a task WORKING CONDITIONS Tools and Equipment Used • Computer workstation, typical office equipment, Laboratory instrument and measurement equipment Travel • Minimal: up to 25% of the time Physical & Mental Demands • Frequently required to sit at a desk/workstation for long period of time, • Digital dexterity and hand/eye coordination in operation of office equipment, • Ability to effectively communicate to employees/clients via phone, computer or in person, • Moderate lifting and carrying of supplies, files, etc., • Body motor skills sufficient to enable incumbent to move around the office environment, • Ability to analyze unique situations and develop appropriate response Environment • Work typically performed in both an office and a laboratory setting

Job Description For more than three decades, Strategic Data Systems (SDS) has been a software consultancy firm specializing in strategy, technology, and business transformation for Fortune 100 companies, mid-sized firms, and startups. At SDS, we empower our development teams to address our clients’ critical business challenges by leveraging cutting edge technologies. If you seek a workplace where your contributions are truly appreciated, then SDS is the company for you. Join us today to work alongside fellow development specialists and become a crucial part of our dynamic and cohesive community. Job Title: QA Automation Engineer Location: Cincinnati, OH (Downtown) Years of Experience: 8+ TOP SKILLS: Must Have • • Programming Languages: Proficiency in Java, Python, and JavaScript •, • Database Knowledge: Strong understanding of SQL and database interactions (e.g., DB2, Snowflake), • API Testing: Hands-on experience with API testing tools and methodologies •, • Version Control: Proficient in Git for code management •, • CI/CD Tools: Familiarity with continuous integration and deployment tools (e.g., Jenkins), • Application Lifecycle Management: Experience with tools such as Digital.ai or qTest, • Testing Tools: WebdriverIO, ReadyAPI, Visual Studio Code, Postman, • Test Automation Frameworks: Expertise in POM, Data-Driven frameworks, Selenium, Appium, or similar, • Data Modernization: Experience with data extract processes including ETL count reconciliation, field-to-field mapping validation, and data quality checks, • Experience with Data Extract Testing: Specifically with Snowflake, • AI for Self-Healing Locators (Applicable for both Katalon and Webdriver IO), AI for Failure Analysis, AI for Visual Validation, AI Chatbot for Test Execution, AI Chatbot for Test Execution and Create Reusable Framework Components, • Quality Assurance What You’ll Do • · Independent Thinking: Willingness to think critically and develop original solutions—not just execute instructions or act as an order taker., • · Strong Communication Skills: Communicate clearly and effectively with stakeholders, articulate ideas and solutions confidently, and collaborate to resolve issues and maintain delivery momentum., • · Collaboration & Stakeholder Partnership: Work effectively across teams, building trust and alignment to resolve problems and ensure successful, timely deliveries., • · Automation Expertise: Proven ability to effectively use automation tools and frameworks to drive efficiency, quality, and scalable delivery., • · Dedication & Impact: Demonstrate genuine dedication to the team’s mission, actively contributing to the success of the team and the Bank while delivering quality products to customers., • · Communication Skills: Must be able to articulate ideas clearly, both verbally and in writing with the IT and technical teams, • Testing Skills Required, • · Test Design Techniques: Knowledge of various testing methodologies (functional, API, regression, integration), • · Test Case Development: Ability to create comprehensive and effective test cases, • · Defect Management: Skilled in identifying, logging, and tracking defects, • · Communication: Clear and concise verbal and written communication with developers, QA teams, and stakeholders, • · Collaboration: Ability to work effectively within cross-functional teams, • · Problem-Solving: Strong analytical skills to identify root causes and propose solutions, • · Adaptability: Ability to keep up with evolving technologies and testing practices, • · Agile Mindset: Experience working within Agile development processes, • · Continuous Improvement: Drive automation initiatives for API/web services testing, Web UI, data extract scripts, database testing, and test data management based on business needs, • What will the QA Test Engineer Be Doing, • As part of a cross-functional Agile squad, chapter, and tribe, the Software Development Engineer in Test (SDET) plays a key role in driving quality engineering practices and delivering test automation excellence. The primary responsibility is to provide thought leadership within the Quality Engineering discipline while ensuring quality through best-in-class automation strategies. This includes designing and developing new test automation frameworks using a variety of tools, maintaining existing automation code with high standards, and applying strong software design principles. The SDET leverages creativity and technical expertise to identify innovative approaches for testing complex software solutions., • In collaboration with all members of the Agile squad, the SDET helps define customer and product requirements and ensures their alignment with both product and test code. They also conduct exploratory testing when necessary. The role requires active partnership and open communication to share ideas, raise concerns, and adhere to quality policies and procedures as defined by Fifth Third’s quality governance standards., • Work as part of an Agile squad, leading quality engineering efforts while collaborating closely with the squad, chapter, and tribe., • Take ownership of test strategy, test planning, framework implementation, and test execution within the Agile environment., • Develop high-quality, Reusable Framework Components, and maintainable test automation code using a variety of automation tools - such as AI for Self-Healing Locators (Applicable for both Katalon and Webdriver IO), AI for Failure Analysis, • Design and implement structured, clean, and cohesive test automation and exploration tests for all new features and functional changes. Organize these into repeatable test suites for native mobile applications (if any), browser-based applications and cover user interface and API layers., • Author test cases in test management tools and ensure comprehensive coverage., • Efficiently reproduce reported software issues, analyze data, and collaborate with team members to quickly resolve obstacles and maintain delivery timelines. What You’ll Get SDS, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state, and local laws. • Competitive base salary, • Medical, dental, and vision insurance coverage, • Optional life and disability insurance provided, • 401(k) with a company match and optional profit sharing, • Paid vacation time, • Paid Bench time, • Training allowance offering, • You’ll be eligible to earn referral bonuses!

Job Description ABOUT PUBLIC ALLIES Public Allies' mission is to create a just and equitable society and the diverse leadership to sustain it. Public Allies is changing the face and practice of leadership in communities across the country by demonstrating its conviction that everyone can lead, and that lasting social change results when citizens of all backgrounds step up, take responsibility, and work together. Public Allies' primary program model matches full-time apprentices with coaching, training, and leadership development in across 21 states. JOB SUMMARY Under the direction of the Site Executive Director, the Senior Program Manager oversees the execution of the full programmatic year for our signature Apprenticeship program and manages the Fellows Program for returning participants. Operating within a co-leadership model, this role works in close partnership with two Program Managers—using strong project management skills to keep shared goals on track while each manager handles their designated areas of focus. The Senior Program Manager leads partner organization recruitment, onboarding, and ongoing relationship management to support partner retention. Additionally, this role co-leads Ally coaching, leadership development, and curriculum delivery, while ensuring the team meets all Public Allies National Office (PANO) and AmeriCorps compliance standards and executing key events like the annual Partner Luncheon. ESSENTIAL JOB FUNCTIONS & KEY OUTCOMES • Programmatic Project Management & Co-Leadership, • Drive project management across the full programmatic year, ensuring clear timelines and smooth execution for Ally, Fellows, and Partner activities., • Serve as the senior project lead within a co-leadership structure, working closely with two Program Managers to align workflows and share key responsibilities., • Support and guide co-leading Program Managers by sharing best practices in project management, compliance, and partner engagement. Fellows Program & Curriculum Execution • Oversee the Fellows Program, providing direct coaching, advanced training, and tailored leadership development for returning members., • Lead second-year Ally curriculum planning, development, and delivery., • Support overall Ally curriculum development and co-facilitate training sessions across the program. Partner Organization & Ally Management • Lead partner organization recruitment, onboarding, relationship management, and long-term retention efforts., • Lead monthly communications with partner organizations., • Manage and coach a dedicated group of up to ten (10) Allies (primarily Fellows), offering direct professional development, coaching, and constructive feedback to drive growth and retention., • Plan and execute major program events, including the annual Partner Luncheon and recruitment fairs, to build strong community partner relationships., • Balance partner site needs with the growth and development goals of the Allies. Compliance & Operations • Track and ensure site-wide compliance with all Public Allies National Office (PANO) and AmeriCorps grant guidelines., • Review and approve member files, time logs, Member Service Reports (MSRs), background checks, and partner paperwork on time., • Maintain accurate data tracking systems and support evaluation plans to track program success and compliance standards. EDUCATION, EXPERIENCE & COMPETENCIES Commitment to and demonstrated capacity to act from Public Allies' core values: • Diversity, Equity, & Inclusion: able to listen, learn, and work across differences to build the common good; actively works to dismantle oppression in all areas of life and work., • Focus on Assets: able to recognize and catalyze the strengths and natural leadership of everyone to build moment for social change; actively seeks to ensure those closest to the impact of our work have a voice in shaping out work, • Integrity: meets commitments and acts responsibly with public and personal trust, • Collaboration: able to build consensus and empower individuals and groups to achieve common goals, • Continuous Learning: relentlessly seeks new information and bold ways to apply that learning, • Innovation: able to respond to demographic, political and social shifts by acting in creative ways that generate new solutions, • Bachelor's Degree or comparative life experience, • Proven project management experience, including the ability to organize, track, and manage multi-phase program timelines., • Strong ability to collaborate effectively in shared-leadership or team-based work environments., • Demonstrated experience planning and running events (e.g., luncheons, fairs, workshops)., • Ability to identify, engage, and support young adults with diverse educational and economic backgrounds, • Ability to manage multiple and varied tasks related to supporting and guiding young adults from the educational, relational, emotional, and social development perspective, • Have a passion for leadership development and a desire to set high expectations and provide a high-quality learning experience for Allies, • Openness and ability to learn from experience and change the course of action to meet the needs of the organization’s evolving environment;, • Open-minded and objective with eagerness to continuously improve the organization’s systems and ability to achieve its outcomes for leaders, organizations, and communities;, • Creative problem solver;, • Solution-oriented;, • Self-starter, self-driven;, • Experience working collaboratively with a team;, • Strong communication skills;, • Commitment to personal and programmatic excellence;, • Adapting to changing goals and responsibilities;, • Positive growth mindset;, • Commitment to Public Allies Mission and Core Values, • Willingness to work nights and weekends as required, • Flexibility and willingness to work long hours (including nights and weekends when needed), • Ability to manage multiple and varied tasks; attention to detail, strong time management and project management skills;, • Strong and intersectional understanding of racial, economic and social justice, • Strong preference for and experience in collaborative, team based work environment, • Strong outreach and communication skills, including written, verbal, and presentations;, • Proficiency in the use of Windows XP, Google Docs, Microsoft Word, Excel, and PowerPoint;, • Ability to be adaptive, comfort with change and a dynamic work environment;, • Experience working in diverse work environments;, • Sense of Humor;, • Positive attitude in accomplishing responsibilities. WORKING CONDITIONSThe position is predominantly sedentary requiring the ability to sit, bend, stand and walk. It may require occasional stooping, reaching, stair-climbing and repetitive motions of the hands and wrist related to writing and typing at an electronic keyboard. It rarely requires kneeling, pushing/pulling, and repetitive motions of the feet. Physical demands of the position necessitate hearing, talking, handling, and grasping regularly. Specific vision conditions include close vision reading. It requires the ability to operate a computer, telephone, fax, copy machine and adding machine or calculator. The position is generally performed in an office environment. The noise level is generally low to quiet. The work environment characteristics are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodations, however, will be made to enable individuals with disabilities to perform said essential functions. PAY EQUITY AND TRANSPARENCY Public Allies is committed to eradicating the pervasive and systemic racial, gender, and socioeconomic barriers to meaningful and sustaining employment that perpetuate inequality and limit opportunity. We believe pay equity and transparency in the hiring process are the first steps. The salary range for this role is $68,000. We appreciate the time and energy it takes candidates to engage in a job search and the hiring process, and to reinforce this commitment, we will be open about pay ranges and opportunities early on, keeping true to our internal equity standards so we can ensure fairness with every person.

Job DescriptionGSS-010 Position: Metal Steel FabricatorSalary: $18.00/hourShifts: 1st Shift - 5:30 am - 3:30 pm Job Requirements: • Must pass a Pre-Employment Drug Test and Background Check, • Math Test (Fractions and Measurement Test) Position Overview:, • Fabrication of metal structures by cutting, bending, and assembling processes., • Ensure all safety practices are followed and look for continuous improvement., • Use Ajax to size intermediate and finishing mills for setup., • Keeping all stands (1-16) at the designed size., • Maintain communication with mill adjust personnel to ensure the finished product is of prime quality., • Maintain expected production rates., • Inspection of new stands after installation in the mill to ensure proper set-up before rolling., • Maintain constant axle temperatures by adjusting furnace temps when needed. Qualifications and Experience:, • Experience in manufacturing, metalworking, and foundry a plus, • Attention to detail, • Excellent writing skills, • Must be a Team Player Physical and Mental Demands:, • Ability to stand for long periods of time., • Ability to bend, walk, twist, lift, and turn., • The constant dominant hand activity., • Ability to lift up to 50 lbs., • Ability to use hands and arms in handling, positioning, and moving material., • Strong verbal communication is required. Working Conditions:, • Concrete flooring, • Artificial lighting, • Exposed to outside elements, (building with an open door) Apply now or call Guardian Staffing Solutions at 513-772-4477 for immediate consideration!

Job Description POSITION SPECIFICATION Position: Mechanical Engineer III Department: Utilities & Central Energy (UCE) Reporting Relationship: Senior Project Manager, UCE COMPANY BACKGROUND KFI Engineers is a recognized industry leader in facility infrastructure design and performance. Since 1996, our culture of collaboration and unique capabilities have allowed us to make a difference in the way infrastructure and processing projects are delivered. Headquartered in St. Paul, MN, with numerous regional offices throughout the United States, and a team of hundreds of professionals, we offer opportunities to continue your career with mentorship programs, career growth support, and continued education. With KFI, we find a way to provide creative solutions to unique projects while providing the same care we would expect if we were the client. For more information about KFI Engineers and our culture, please visit www.kfi-eng.com. The Utilities & Central Energy (UCE) group specializes in large central plant work, particularly for district energy serving cities, universities, hospitals, and manufacturing campuses. Our expertise covers both energy production and distribution. We have expertise in sustainable energy production, simple and combined cycle, combined heat and power, industrial HVAC, and medium voltage power. Our clients look for us to lead large complex projects from concept to completion, including startup, check-out, and commissioning. POSITION OVERVIEW & RESPONSIBILITIES The Mechanical Engineer III plays a key role in the successful execution of projects. This individual will provide technical and engineering excellence, as well as successful delivery of work to our customers. The Mechanical Engineer III is responsible for a high level of customer satisfaction by ensuring expectations are clearly communicated and managed – both externally and internally. The successful candidate will also contribute to a dynamic team environment by being proactive, communicating clearly and frequently, and modeling a highly collaborative working environment. This person will also actively support the business development process through the writing of proposals and meeting with prospective and current customers. Specific responsibilities will include, but not be limited to, the following: • Lead the design of chilled water, heating hot water, steam, and hydronic utility systems for central plants and campus infrastructure projects, including engineering calculations, hydronic system sizing, equipment selection, and code-compliant design documentation., • Develop and review engineering deliverables including P&IDs, piping system layouts, mechanical room layouts, technical reports, studies, specifications, and drawing submittals., • Perform or coordinate pipe stress analysis and provide technical support for utility system design and implementation., • Coordinate designs and drawings with architectural, structural, electrical, civil, and other engineering disciplines., • Prepare equipment specifications and lead equipment selection, pre-purchase package development, procurement activities, and related vendor coordination., • Develop estimates for assigned scope of work and contribute to project budgeting, forecasting, pricing, invoicing, and scope management activities., • Support project planning, resource allocation, scheduling, and coordination efforts to ensure successful project execution., • Provide technical and engineering support to other departments/disciplines and mentor junior engineers, designers, and interns., • May manage assigned projects, driving them to completion., • Support the business development process through proposal development and by meeting and presenting to prospective and current customers., • May represent KFI at conferences, customer events, and through membership in industry associations., • Other duties as assigned. QUALIFICATIONS Required • Bachelor’s degree in Mechanical Engineering or similar, related degree., • Minimum of 7 years of Mechanical Engineering experience following graduation., • Demonstrated proficiency designing utility generation and distribution systems, including chilled water, heating hot water, steam, and hydronic systems., • Experience performing equipment selection and developing engineering deliverables, including P&IDs, mechanical room layouts, piping system designs, and hydronic system sizing calculations., • Demonstrated ability to coordinate engineering drawings and designs across multiple disciplines., • Basic understanding of Architectural, Electrical, Civil, and Structural Engineering construction practices., • Proficient in both AutoCAD and Revit., • Expert knowledge of technology and the application of technology in business., • Proven ability to build strong client relationships and establish credibility with internal and external stakeholders., • Excellent communication, interpersonal, and collaboration skills., • Ability to present complex information to diverse audiences, synthesize ideas into actionable recommendations, and positively influence outcomes., • Strong planning, analytical, organizational, and problem-solving skills., • High attention to detail with the ability to manage multiple priorities., • Travel: May include up to 25% domestic travel Preferred • Professional Engineer (P.E.) certification or willingness to pursue certification strongly preferred., • Strong experience in infrastructure projects and/or plant operations., • Experience with layout work, shop drawings, and generating technical reports., • Experience performing pipe stress analysis using Caesar II and/or AutoPIPE., • Demonstrated experience developing construction cost estimates, supporting project budgeting activities, and planning and coordinating work to meet project schedules., • Effective meeting facilitation and management skills. Working Conditions • Some work locations will feature the tough terrain typical of construction sites or require lifting or moving field testing equipment. CORE BEHAVIORS Accountable • Demonstrates persistence in the achievement of goals., • Acts with a sense of urgency., • Takes responsibility for own actions. Business Focus • Demonstrates agility, adapts well to changes., • Works well under pressure., • Meets commitments to internal/external customers. Project Execution • Plans projects well, managing last-minute rushes and disruptions., • Balances Speed and Quality., • Looks for improvement in our delivery, tools and processes., • Other duties as assigned. Demonstrates Respect for Others • Keeps others adequately informed., • Exhibits objectivity and openness to others' views., • Adapts communication style and method based on audience and situation. Team Player • Balances team and individual responsibilities., • Shares expertise with others., • Inspires respect and trust. Benefits: At KFI, our comprehensive benefit program provides our employees with the resources to support their health, wellness and financial well-being. Full-Time employees have access to: • Health, dental and vision insurance coverage, • Virtual health services, • Health Savings Account (HSA) & Health Reimbursement Account (HRA) for HDHP enrollees with KFI contributions, • Flexible Spending Account, • 401(k) plan, • Short-term and long-term disability insurance, life and AD&D insurance, • Employee Assistance Program, • Paid Time Off to include Earned Sick and Safe Time in accordance with state laws, • Paid Volunteer Time Off, • Company Paid Holidays, • Tuition Reimbursement, • Bereavement Leave, • Voluntary benefits offered include life, accident, critical illness coverage Please note this job description is not designed to cover a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This position is not eligible for Visa sponsorship. Equal Opportunity Employer – Veterans and Disabilities

Job Description Company Profile: The Baerlocher Group of companies is one of the world's leading additive suppliers, drawing on experience from more than 200 years of company history. Our products have a worldwide reputation for their high-quality standards and commitment to innovation and sustainability. Job Summary: The Environmental, Health, and Safety (EH&S) Manager is responsible for developing, implementing and maintaining environmental, safety, health and other related programs to ensure compliance with all applicable regulations including company-specific requirements to support our manufacturing environment. This role focuses on minimizing risks, promoting a strong safety culture, and ensuring compliance with all applicable regulations. Key Responsibilities: Regulatory Compliance: • Works directly with the Baerlocher staff to ensure that the regulatory support programs are aligned with the company goals and objectives., • Reports out to Baerlocher Staff on all issues and performance with respect to Key Performance Indicators (KPIs)., • Ensures adherence to OSHA, EPA, DOT, NFPA, and other applicable regulations., • Prepares required reporting e.g. SARA, RCRA, stormwater, emissions, permit renewal applications for the appropriate Baerlocher Certification., • Interfaces with regulatory agencies proactively and on an as needed basis., • Monitors current and pending regulations, providing timely interpretation and summaries to the management team and applicable operations facility., • Supports facility in the timely reporting of EH&S matters to internal and external stakeholders, including regulatory agencies. Safety Program Management: • Develops and supports the implementation of company EH&S standards to ensure facility compliance with federal, state, and local regulations., • Conduct risk assessments and hazard analyses for chemical processes., • Coaches and mentors’ operations management teams and site on EH&S matters, encouraging continuous improvement., • Leads and supports companywide EH&S initiatives, working collaboratively with operations management teams and other company departments., • Identifies best practices and strategically integrates them into facility EH&S plans., • Reports Key Performance Indicators (KPIs) to staff, integrating leading and lagging indicators to assess performance and inform decision-making. Incident Management: • Supports and encourages timely incident investigations, leading the Root Cause Analysis (RCA) process when needed and ensuring that all identified corrective measures are implemented., • Maintains records of incidents and coordinates with regulatory agencies as needed., • Responds and provides real time assistance in emergency situations. Training & Communication: • Design and deliver all Company and Regulatory required training programs., • Manages all regulatory training records to ensure all personnel are properly and timely trained and reports out to Staff and Department Managers on a regular basis on Training KPIs., • Promotes a proactive safety culture through regular communication and engagement. Audits & Inspections: • Performs Program audits and safety inspections of facilities and processes., • Recommends corrective or preventive measures to Management and follows up to ensure measures have been implemented., • Ensures proper storage, handling, and disposition of all chemicals and materials for the site., • Analyzes EH&S metrics, communicating and implementing action plans to address trends. Required Knowledge/Skills/Abilities: We assume that the possible candidate can think and act independently and entrepreneurially, that the candidate has a structured way of working, analytical capabilities paired with an instinct for people and is a flexible team-player with a “hands-on” mentality. In addition, we require: • Bachelor’s degree (preferably in Science, Engineering, or related field., • Certification preferred (CIH, CSP, and/or CHP) or 7-10+ years of progressive experience in Safety Management; Chemical Manufacturing., • Strong knowledge of OSHA, EPA, and state-specific regulations., • Experience with hazardous materials, air permits, and environmental reporting., • Effectively communicates across all organizational levels through clear writing, persuasive speaking, and proficient group facilitation., • Acts as a change leader by influencing organizational behavior, driving continuous improvement, and fostering a culture of safety and compliance., • Provides clear expectations, ensures accountability, and builds commitment while modeling professionalism, approachability, and alignment with organizational goals., • Must be a team player that interacts effectively with co-workers in group or in independent cooperative activities., • Ability to function under pressure and able to prioritize numerous tasks with conflicting deadlines., • Ability to coordinate emergencies and work flexible hours as needed., • Ability to influence and to drive safety culture., • Proficient in Microsoft Office (Word, Excel, PowerPoint, Access) with the ability to prepare reports, presentations, and data analysis to support decision-making.

Job Description Oversee federal facility operations while ensuring safety, compliance, and reliable building performance. Overview At MIRACORP, we don’t just support federal agencies—we set the standard for quality and reliability. What sets us apart is our people. We invest in talent, innovation, and leadership to create an environment where your contributions make a meaningful impact. Position Summary The Project Manager IV leads complex, high-value commercial design and construction projects for government facilities, overseeing all phases from planning and design through construction, commissioning, and occupancy. This role requires hands-on technical expertise in electrical, mechanical, and HVAC building systems, along with strong command of codes, life safety, and quality assurance standards. The incumbent serves as the on-site project manager, resolves field issues involving core building systems, and ensures successful project delivery through strong coordination with internal teams, A/E firms, contractors, and customer agencies. Essential Functions • Manage multiple large-scale commercial construction and renovation projects, including scope development, cost estimating, scheduling, procurement coordination, and contractor oversight — with particular attention to electrical, mechanical, and HVAC scopes of work., • Prepare Project Management Plans, establish project milestones, track progress, and ensure compliance with governing codes, life safety requirements, sustainability standards, and quality assurance expectations for mechanical, electrical, and plumbing (MEP) systems., • Serve as the on-site project manager or inspector, performing daily field oversight, resolving complex construction issues — including HVAC, electrical, and mechanical system challenges — and ensuring work meets contract requirements and budget constraints., • Review and recommend approval of design documents, construction submittals, progress evaluations, and invoices related to building systems and MEP trades; coordinate with A/E firms, contractors, contracting specialists, and customer agencies., • Provide technical expertise on electrical, mechanical, and HVAC systems, workmanship quality, environmental regulations, and construction best practices., • Facilitate project meetings, maintain strong stakeholder communication, and support a collaborative team environment with acquisition, financial, and program staff., • Maintain accurate project documentation and ensure projects are delivered on scope, on schedule, and on budget., • Travel to project sites for inspections, progress reviews, and technical evaluations as required. Minimum Requirements • US Citizen, • Bachelor's degree in Construction Management, Engineering (Electrical/Mechanical preferred), Architecture, or related field; and/or ten years of experience managing commercial design and construction projects., • Master's degree in a related field preferred., • Demonstrated experience managing projects involving electrical, mechanical, and/or HVAC systems — including installation, retrofit, or renovation work on commercial buildings., • Extensive knowledge of commercial building design, construction methods, and building systems (electrical, mechanical, HVAC, plumbing), with the ability to solve complex technical and project challenges., • Proficiency in project management principles, construction scheduling, cost estimating, reading and interpreting construction documents and MEP drawings, and writing scopes of work and specifications., • Strong interpersonal and communication skills to collaborate with customers, acquisition staff, contractors, financial managers, and other stakeholders., • Demonstrated ability to lead multidisciplinary teams and manage multiple high-value commercial projects simultaneously., • Advanced computer skills and familiarity with project management and estimating software., • Preferred: Professional licensure or certification (PE, CPMP, PMP, or equivalent) related to electrical, mechanical, or HVAC disciplines.\nCompany Description Why Choose MIRACORP? At MIRACORP, we recognize that our employees are the cornerstone of our success. That’s why we offer an exceptional benefits package from day one, including: Paid Time Off (Personal, Vacation, Sick Leave) Comprehensive Health Coverage (Medical, Vision, Dental) Flexible Spending Account (FSA) Options for healthcare and dependent care Short-Term & Long-Term Disability Coverage Life Insurance & Accidental Death & Dismemberment Protection Employee Wellness Resources & Assistance Programs Financial Counseling Programs to support long-term planning Commuter Benefits for work-life ease 401(k) with 100% immediate employer matching We proudly support veterans and all qualified applicants, ensuring equal employment opportunities without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Join a team where your expertise is valued, your impact is recognized, and your career can thrive. Come grow with us–because at MIRACORP, your success is our success! Why Choose MIRACORP?\r\n\r\nAt MIRACORP, we recognize that our employees are the cornerstone of our success. That’s why we offer an exceptional benefits package from day one, including:\r\n\r\nPaid Time Off (Personal, Vacation, Sick Leave)\r\nComprehensive Health Coverage (Medical, Vision, Dental)\r\nFlexible Spending Account (FSA) Options for healthcare and dependent care\r\nShort-Term & Long-Term Disability Coverage\r\nLife Insurance & Accidental Death & Dismemberment Protection\r\nEmployee Wellness Resources & Assistance Programs\r\nFinancial Counseling Programs to support long-term planning\r\nCommuter Benefits for work-life ease\r\n401(k) with 100% immediate employer matching\r\n\r\nWe proudly support veterans and all qualified applicants, ensuring equal employment opportunities without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.\r\n\r\nJoin a team where your expertise is valued, your impact is recognized, and your career can thrive. Come grow with us–because at MIRACORP, your success is our success!

Job DescriptionHigher Level BCSP Cert Required CHST / GSP / ASP / CSP You will provide support to the Project Staff and the Concrete Strategies safety team in an effort to execute corporate safety and health standards and procedures in compliance with Federal, State, and Local requirements. In addition to your project responsibilities, you shall participate in and complete all assignments designated to you. This will include, but is not limited to, assisting in development of a zero injury safety culture on each project, conducting at least weekly documented jobsite safety inspections, effectively communicate orientations for all new project workers, assist with and review subcontractor daily pre-task safety analysis, actively promote and participate in daily stretch and flex program, identify project trends and execute proactive safety initiatives to eliminate incidents, support corporate goals and initiatives, emphasize and support proactive safety such as near miss/hazard reporting, coach and recognize workers on safe work methods, report all incidents in an effective and timely manner following established protocols and be a champion in motivating workers to perform their jobs safely! Your responsibilities will be all encompassing for each project you will be dedicated to. This is a full-time traveling position. Responsibilities: • Assist in development of the project safety program., • Establish and conduct jobsite orientation for new project employees., • Administer and record their participation in the orientation program and issue identification to those employees completing the orientation program., • Attend all initial meetings with the project staff and subcontractor representatives to clearly define their role within the confines of the project safety program., • Conduct and document pre-planning safety meetings with each subcontractor representatives to establish safety procedures prior to subcontractor’s activity on site., • Establish and conduct regular (weekly) safety meetings with subcontractor representatives and with project staff to ensure proper compliance., • Facilitate training for site personnel and ensure that standards are per the OSHA\Concrete Strategies and in compliance with Federal and State standards., • Ensure and maintain a log of each subcontractor toolbox safety meeting., • Review each subcontractors safety program and ensure that it meets or exceeds the project safety program requirements., • Ensure that each subcontractor designates a safety representative that is properly trained in subcontractors scope of work and has the proper authority to correct safety issues., • Conduct regular daily and weekly jobsite inspections and complete the safety checklist noting safety violations and corrective actions., • Record, notify and prepare written report of any violations or unsafe practices to subcontractors for immediate correction actions., • Stop at once any violation or unsafe acts or practices., • Assist the Project Superintendent in establishing and implementing proper fire prevention, evacuation and fire control procedures., • Investigate all incidents and generate proper reports., • Establish and maintain all required safety records., • Conduct a monthly overview safety meeting and attend project staff meetings to brief on safety issues., • Perform other duties as necessary. Qualifications: • Strong management, leadership and interpersonal skills with the ability to communicate well both verbally and in writing., • At least (3) years of safety experience or combination of education/multiple years experience in building construction., • With a working knowledge of safety/environment principles and techniques., • OSHA 30-hour construction accreditation., • OSHA 500 Outreach Trainer is a plus., • Computer skills with familiarity with Microsoft Office., • Bilingual is a plus.

Job DescriptionYou will provide support to the Project Staff and the Concrete Strategies safety team in an effort to execute corporate safety and health standards and procedures in compliance with Federal, State, and Local requirements. In addition to your project responsibilities, you shall participate in and complete all assignments designated to you. This will include, but is not limited to, assisting in development of a zero injury safety culture on each project, conducting at least weekly documented jobsite safety inspections, effectively communicate orientations for all new project workers, assist with and review subcontractor daily pre-task safety analysis, actively promote and participate in daily stretch and flex program, identify project trends and execute proactive safety initiatives to eliminate incidents, support corporate goals and initiatives, emphasize and support proactive safety such as near miss/hazard reporting, coach and recognize workers on safe work methods, report all incidents in an effective and timely manner following established protocols and be a champion in motivating workers to perform their jobs safely! Your responsibilities will be all encompassing for each project you will be dedicated to. This is a full-time traveling position. Responsibilities: • Assist in development of the project safety program., • Establish and conduct jobsite orientation for new project employees., • Administer and record their participation in the orientation program and issue identification to those employees completing the orientation program., • Attend all initial meetings with the project staff and subcontractor representatives to clearly define their role within the confines of the project safety program., • Conduct and document pre-planning safety meetings with each subcontractor representatives to establish safety procedures prior to subcontractor’s activity on site., • Establish and conduct regular (weekly) safety meetings with subcontractor representatives and with project staff to ensure proper compliance., • Facilitate training for site personnel and ensure that standards are per the OSHA\Concrete Strategies and in compliance with Federal and State standards., • Ensure and maintain a log of each subcontractor toolbox safety meeting., • Review each subcontractors safety program and ensure that it meets or exceeds the project safety program requirements., • Ensure that each subcontractor designates a safety representative that is properly trained in subcontractors scope of work and has the proper authority to correct safety issues., • Conduct regular daily and weekly jobsite inspections and complete the safety checklist noting safety violations and corrective actions., • Record, notify and prepare written report of any violations or unsafe practices to subcontractors for immediate correction actions., • Stop at once any violation or unsafe acts or practices., • Assist the Project Superintendent in establishing and implementing proper fire prevention, evacuation and fire control procedures., • Investigate all incidents and generate proper reports., • Establish and maintain all required safety records., • Conduct a monthly overview safety meeting and attend project staff meetings to brief on safety issues., • Perform other duties as necessary. Qualifications: • Strong management, leadership and interpersonal skills with the ability to communicate well both verbally and in writing., • At least (3) years of safety experience or combination of education/multiple years experience in building construction., • With a working knowledge of safety/environment principles and techniques., • OSHA 30-hour construction accreditation., • OSHA 500 Outreach Trainer is a plus., • Computer skills with familiarity with Microsoft Office.

Job DescriptionGeneral Description:As a Sr. Site Safety Manager, you will provide support to the Project Staff and the Concrete Strategies safety team in an effort to execute corporate safety and health standards and procedures in compliance with Federal, State, and Local requirements. In addition to your project responsibilities, you shall participate in and complete all assignments designated to you. This will include, but is not limited to, assisting in development of a zero injury safety culture on each project, conducting at least weekly documented jobsite safety inspections, effectively communicate orientations for all new project workers, assist with and review subcontractor daily pre-task safety analysis, actively promote and participate in daily stretch and flex program, identify project trends and execute proactive safety initiatives to eliminate incidents, support corporate goals and initiatives, emphasize and support proactive safety such as near miss/hazard reporting, coach and recognize workers on safe work methods, report all incidents in an effective and timely manner following established protocols and be a champion in motivating workers to perform their jobs safely! Your responsibilities will be all encompassing for each project you will be dedicated to. Responsibilities: • Assist in development of the project safety program., • Establish and conduct jobsite orientation for new project employees., • Administer and record their participation in the orientation program and issue identification to those employees completing the orientation program., • Attend all initial meetings with the project staff and subcontractor representatives to clearly define their role within the confines of the project safety program., • Conduct and document pre-planning safety meetings with each subcontractor representatives to establish safety procedures prior to subcontractor’s activity on site., • Establish and conduct regular (weekly) safety meetings with subcontractor representatives and with project staff to ensure proper compliance., • Facilitate training for site personnel and ensure that standards are per the OSHA\Concrete Strategies and in compliance with Federal and State standards., • Ensure and maintain a log of each subcontractor toolbox safety meeting., • Review each subcontractors safety program and ensure that it meets or exceeds the project safety program requirements., • Ensure that each subcontractor designates a safety representative that is properly trained in subcontractors scope of work and has the proper authority to correct safety issues., • Conduct regular daily and weekly jobsite inspections and complete the safety checklist noting safety violations and corrective actions., • Record, notify and prepare written report of any violations or unsafe practices to subcontractors for immediate correction actions., • Stop at once any violation or unsafe acts or practices., • Assist the Project Superintendent in establishing and implementing proper fire prevention, evacuation and fire control procedures., • Investigate all incidents and generate proper reports., • Establish and maintain all required safety records., • Conduct a monthly overview safety meeting and attend project staff meetings to brief on safety issues., • Perform other duties as necessary. Qualifications: • Strong management, leadership and interpersonal skills with the ability to communicate well both verbally and in writing., • Education/Experience:, • B.S. in Safety and Health or equivalent., • At least two (4) years of safety experience or combination of education/multiple years experience in building construction, with a working knowledge of safety/environment principles and techniques., • Bilingual in Spanish and intercultural communication skills is preferred., • Computer skills with familiarity with Microsoft Office. Working Conditions:Physical requirements: • Performance of the required duties will require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction., • Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus., • Requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear, stand, climb, balance, stoop, kneel, crouch, or crawl., • Occasionally lift and/or move up to 75 pounds., • Regularly works on-site at the construction work site where the employee is exposed to moving mechanical parts; high precarious places, fumes or airborne particles, outside weather conditions and risk to electrical shock.

Job Description POSITION SPECIFICATIONS Position: Project Manager Department: Healthcare COMPANY BACKGROUND KFI Engineers is a recognized industry leader in facility infrastructure design and performance. Since 1996, our culture of collaboration and unique capabilities have allowed us to make a difference in the way infrastructure and processing projects are delivered. Headquartered in St. Paul, MN, with numerous regional offices throughout the United States, and a team of hundreds of professionals, we offer opportunities to continue your career with mentorship programs, career growth support, and continued education. With KFI, we find a way to provide creative solutions to unique projects while providing the same care we would expect if we were the client. For more information about KFI Engineers and our culture, please visit www.kfi-eng.com. POSITION OVERVIEW & RESPONSIBILITIES The Project Manager plays a key role in the successful management of projects. This individual will provide technical and business leadership, as well as oversight to ensure the successful delivery of work to our customers. The Project Manager is responsible for a high level of customer satisfaction by ensuring expectations are clearly communicated and managed – both externally and internally. The successful candidate will also create a dynamic team environment by mentoring and coaching colleagues and fostering a highly collaborative working environment. This person will also actively support the business development process, through the writing of proposals and meeting with prospective and current customers, thereby clearly articulating KFI’s value proposition and unique differentiators. Specific responsibilities will include, but not be limited to, the following: • Oversee projects in the department to assure that KFI quality, customer satisfaction and financial objectives are met., • Actively manages assigned projects, driving them to completion. This will require a combination of strong delegation and follow-up, combined with personal execution of work as needed., • Allocates department resources to assure effective utilization and development of staff., • Ensures that new opportunities are properly defined and scoped. Actively contributes to all aspects of the business development process (i.e., proposals and customer meetings)., • Ensures the development and coaching of the talent needed to meet current and future organization goals., • Reviews invoices, ensuring the accuracy and timeliness of billing activity., • Drives cross functional coordination (both internal and external); including meeting management, schedule coordination, maintains project decisions and action log, and ensures timely follow up., • Responsible for project documentation, including, but not limited to, initial project set up, master engineering deliverable list, project monthly reporting (KPI’s), and engineering code compliance., • Oversees the project document control process within KFI standards by utilizing the Project Coordinators to maintain the master deliverable list and other project documents., • Other responsibilities as assigned. QUALIFICATIONS Required • Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Chemical Engineering, Construction Management, degree in a related field OR equivalent experience., • Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Chemical Engineering, Construction Management, Architecture, or degree in a related field., • Minimum of 10+ years of project leadership experience., • Demonstrated experience managing projects related to healthcare facilities., • Strong working knowledge of design and construction processes, building systems, contract management and project delivery methods., • A basic understanding of Architectural, Electrical, Civil and Structural Engineering construction practices., • Superior project management skills and knowledge of related tools and processes., • Expert knowledge of technology and the application of technology in business., • Proven ability to build strong client relationships and establish credibility., • Excellent oral and written communication skills, with strong interpersonal and collaboration skills., • Effectively presents complex information to employees, management, and clients at all levels., • Skilled at synthesizing ideas into actionable recommendations and positively influencing outcomes., • Strong planning, analytical, organizational, and problem-solving skills., • High attention to detail with the ability to manage multiple priorities., • Travel: May include up to 25% domestic travel. Working Conditions • Some work locations will feature the tough terrain typical of construction sites. CORE BEHAVIORS Accountable • Demonstrates persistence in the achievement of goals., • Acts with a sense of urgency., • Takes responsibility for own actions. Business Focus • Demonstrates agility, adapts well to changes., • Works well under pressure., • Meets commitments to internal/external customers. Project Execution • Plans projects well, managing last-minute rushes and disruptions., • Balances Speed and Quality., • Looks for improvement in our delivery, tools and processes., • Other duties as assigned. Demonstrates Respect for Others • Keeps others adequately informed., • Exhibits objectivity and openness to others' views., • Adapts communication style and method based on audience and situation. Team Player • Balances team and individual responsibilities., • Shares expertise with others., • Inspires respect and trust. Benefits: At KFI, our comprehensive benefit program provides our employees with the resources to support their health, wellness and financial well-being. Full-Time employees have access to: • Health, dental and vision insurance coverage, • Virtual health services, • Health Savings Account (HSA) & Health Reimbursement Account (HRA) for HDHP enrollees with KFI contributions, • Flexible Spending Account, • 401(k) plan, • Short-term and long-term disability insurance, life and AD&D insurance, • Employee Assistance Program, • Paid Time Off to include Earned Sick and Safe Time in accordance with state laws, • Company Paid Holidays, • Tuition Reimbursement, • Bereavement Leave, • Voluntary benefits offered include life, accident, critical illness coverage Please note this job description is not designed to cover a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This position is not eligible for Visa sponsorship. Equal Opportunity Employer – Veterans and Disabilities

Job Description POSITION SPECIFICATION Position: Senior Project Manager Department: Industrial, Process and Agribusiness (IPA) Reporting Relationship: Director, IPA COMPANY BACKGROUND KFI Engineers is a recognized industry leader in facility infrastructure design and performance. Since 1996, our culture of collaboration and unique capabilities have allowed us to make a difference in the way infrastructure and processing projects are delivered. Headquartered in St. Paul, MN, with numerous regional offices throughout the United States, and a team of hundreds of professionals, we offer opportunities to continue your career with mentorship programs, career growth support, and continued education. With KFI, we find a way to provide creative solutions to unique projects while providing the same care we would expect if we were the client. For more information about KFI Engineers and our culture, please visit www.kfi-eng.com. POSITION OVERVIEW & RESPONSIBILITIES The Senior Project Manager plays a key role in the successful management of industrial projects and the development of staff. This individual will provide technical and engineering leadership and is responsible for a high level of customer satisfaction by ensuring expectations are clearly communicated and managed – both externally and internally. The successful candidate will also create a dynamic team environment by mentoring and coaching colleagues and fostering a highly collaborative working environment. This person will also actively support the business development process, through the writing of proposals and meeting with prospective and current customers, thereby clearly articulating KFI’s value proposition and unique differentiators. Specific responsibilities will include, but not be limited to, the following: • Oversees and participates in the engineering of projects in the department to assure that KFI quality, customer satisfaction and financial objectives are met., • Actively manages assigned projects, driving them to completion. This will require a combination of strong delegation and follow-up, combined with personal execution of work as needed., • Applies principles from science to engineering designs and problems while supporting other departments/disciplines., • Manages project execution, schedules, and budgets, and ensures the accuracy and timeliness of invoicing and billing activity., • Ensures that new opportunities are properly defined and scoped. Actively contributes to all aspects of the business development process (i.e., proposals and customer meetings)., • Manages staff, provides overall direction, and facilitates goal setting and performance reviews. Conducts one-on-one meetings with staff as required., • Allocates department resources to assure effective utilization and development of staff., • Ensures the development and coaching of the talent needed to meet current and future organization goals., • Takes an active role in departmental resource planning, strategy, hiring, and process improvements as a member of the IPA department leadership team., • Other duties as assigned. QUALIFICATIONS Required • Bachelor’s degree in Mechanical or Chemical Engineering, or related field., • Minimum of 15+ years' professional experience., • Demonstrated strong proficiency in design and construction phase support services., • Possess strong interpersonal skills to enable effective development and leadership of Designers, Engineers and Project Managers., • Superior project management skills and knowledge of related tools and processes., • Strong influencing skills and demonstrated maturity and self-confidence to work with senior business leaders and customers., • Be naturally collaborative and possess the ability to assimilate a range of ideas, programs, or alternatives into a set of recommendations., • Knowledge of computer technology and specific areas of application, including MS Office and design software common to industrial facility engineering., • Represent the company in a professional matter., • Excellent verbal and written communication skills., • Strong interpersonal skills and ability to collaborate with others., • Must be legally authorized to work in the US on a permanent basis without the need for work sponsorship now or in the future., • Travel: May include up to 15% domestic travel. Preferred • Professional Engineer (PE) certification or willingness to pursue this designation., • Experience in consulting engineering is preferred. Working Conditions • Some work locations will feature the tough terrain typical of construction sites. CORE BEHAVIORS Accountable • Demonstrates persistence in the achievement of goals., • Acts with a sense of urgency., • Takes responsibility for own actions. Business Focus • Demonstrates agility, adapts well to changes., • Works well under pressure., • Meets commitments to internal/external customers. Project Execution • Plans projects well, managing last-minute rushes and disruptions., • Balances Speed and Quality., • Looks for improvement in our delivery, tools and processes. Demonstrates Respect for Others • Keeps others adequately informed., • Exhibits objectivity and openness to others' views., • Adapts communication style and method based on audience and situation. Team Player • Balances team and individual responsibilities., • Shares expertise with others., • Inspires respect and trust.

Job Description Data Entry / Transaction Balancing Operator Location: Cincinnati, OH Schedule: Monday – Friday, 7:00 AM – 3:30 PM Pay Rate: $18.00/hour Kelly is seeking detail-oriented Data Entry / Transaction Balancing Operators to join our team! In this role, you will support our client’s production operations by accurately validating and entering transaction data captured by their transport system. Key Responsibilities: • Enter and validate transaction data with accuracy and speed (minimum 8,500 keystrokes per hour or 55 WPM with 1% or less error rate), • Perform 10-key by touch, • Verify critical information from lead and extraction tickets, vouchers, checks, and OCR lines, • Support high-quality and timely production output by following established processes, • Establish positive working relationships with team leaders and coworkers, • Interpret written and verbal instructions to complete daily tasks Qualifications: • High school diploma or equivalent required, • Up to 1 year of relevant item processing or data entry experience preferred, • Strong clerical, reading, writing, and math skills, • Ability to organize information, resolve exceptions, and accurately interpret data, • Excellent customer relations and communication skills Physical Demands & Work Environment: • Ability to sit and perform key entry tasks for extended periods, • Able to handle office tools (pen, stapler, scissors, etc.) and occasionally lift up to 10 lbs, • Work in a production environment with varying daily duties based on processing demand Why Kelly? • Competitive pay and consistent schedule, • Weekly pay options and benefit opportunities, • Access to Kelly’s employee community and perks Ready to get started? Apply now to speak with a Kelly recruiter! As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Get a complete career fit with Kelly®. You’re looking to keep your career moving onward and upward, and we’re here to help you do just that. Our staffing experts connect you with top companies for opportunities where you can learn, grow, and thrive. Jobs that fit your skills and experience, and most importantly, fit right on your path of where you want to go in your career. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

Job Description EyeCare Partners is the nation's leading provider of clinically integrated eye care. Our national network of over 300 ophthalmologists and 700 optometrists provides a lifetime of care to our patients with a mission to enhance vision, advance eye care and improve lives. Based in St. Louis, Missouri, over 650 ECP-affiliated practice locations provide care in 18 states and 80 markets, providing services that span the eye care continuum. For more information, visit www.eyecare-partners.com. Company: Cincinnati Eye Institute Job Title: Ophthalmic Technician Location: Edgewood, KY Travel: Travel to our other offices in Cincinnati, OH will be required as needed. We do pay mileage reimbursement! Perks: • Full Benefits Package - medical, vision, dental and life insurance, • 401k + employer matching, • Paid Time Off (PTO) and paid holidays, • Paid Maternity Leave, • Eyecare certification reimbursements, • Competitive base pay, • Employee discounts Hours: • Full Time, • Our offices are open from Monday-Friday 7:45am-7pm and Saturday 7:45am-1pm (typically 2 Saturdays per month), • You will not work all of these hours, but must have open availability to work any shift within these hours, • You may need to work a little earlier/later as needed. SUMMARY An Ophthalmic Technician is a valuable asset to an Ophthalmologist as they assist in providing excellent patient care to the patients during their visit. This employee is able to handle a wide range of duties while using equipment to perform the initial testing needed to prepare a patient for an exam with an Ophthalmologist. ESSENTIAL DUTIES AND RESPONSIBILITIES • Provide exceptional customer service during every patient encounter (in person or via phone), • Display a professional attitude, greet patients promptly with a smile, and thank them when they leave, • Anticipate Physician needs to facilitate the flow of the clinic, • Practice urgency at all times with patient's time, as well as doctor's time and schedule, • Comply with all company policies and procedures, including HIPAA, • Verify patient's information by interviewing patient, • Record patient's medical history and current medications and confirm purpose of visit, • Record all data in the patient's Electronic Medical Record (EMR), • Check condition of patient's eyes by observing pupils, muscles, visual acuity, and extraocular movements, • Required skills include: dilation, refraction, pressures, and performing a variety of diagnostic tests including visual fields, OCT, GDX, IOL master, auto refractor and topography, • Demonstrates working knowledge of eye anatomy, diseases, symptoms and ocular medications, • Accurately and thoroughly document medical visits and procedures as they are being performed by the Physician, • Prepare patients for treatments and minor procedures; measure and record vital signs (blood pressure, pulse, and respiration rate) as required, • Open and close exam rooms as needed, • Keep examination, treatment, laser and any other assigned rooms cleaned and stocked with supplies, and keep drug count up to date., • General office duties and cleaning to be assigned by manager QUALIFICATIONS • Provides excellent patient care and is energetic and empathetic with patients, • Must comply with HIPAA confidentiality standards when communicating patient information, • Communication skills and the ability to coordinate and cooperate with all levels of employees in a courteous, professional manner at all times, • Organizational skills with focus on tracking patient care and improving patient flow, • Desire to gain industry knowledge and training, • Demonstrates initiative in accomplishing practice goals, • Ability to grow, adapt, and accept change, • Consistently creates a positive work environment by being team-oriented and patient-focused, • Commitment to work over 40 hours to meet the needs of the business, • Ability to work weekends when applicable, • Reliable transportation that would allow employee to go to multiple work locations with minimal notice EDUCATION AND/OR EXPERIENCE • Minimum Required: High school diploma or general education degree (GED) required, • Minimum Required: One year of related experience and/or training; or equivalent combination of education and experience LICENSES AND CREDENTIALS • Current Certified Ophthalmic Assistant (COA) or Certified Ophthalmic Technician (COT) certification is preferred, but not required SYSTEMS AND TECHNOLOGY • Proficient in Microsoft Excel, Word, PowerPoint, Outlook, • Experience using Electronic Medical Records (EMR) systems, • Computer proficiency and ability to quickly learn new applications PHYSICAL REQUIREMENTS • This role requires a variety of physical activities to effectively perform essential job functions. The position involves frequent walking (75%), sitting (50%), and standing (50%), with regular bending, stooping, and reaching (25–50%). Employees must be able to lift, carry, push, and pull items up to 25 lbs. Strong fine motor skills and full use of hands are essential, as the role demands constant grasping, writing/typing, and use of technology. Visual and auditory acuity—including color, depth, peripheral vision, and the ability to adjust focus—is required 100% of the time. Occasional driving or climbing may also be necessary. If you need assistance with this application, please contact (636) 227-2600. Please do not contact the office directly – only resumes submitted through this website will be considered. EyeCare Partners is an equal opportunity/affirmative action employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.